®
LIFESTYLE VS–1
Video Expander
2ZQHU¶Vꢀ*XLGH
%UXJHUYHMOHGQLQJ
%HGLHQXQJVDQOHLWXQJ
*XtDꢀGHꢀXVDULR
1RWLFHꢀG¶XWLOLWVDWLRQ
0DQXDOHꢀGLꢀLVWUX]LRQL
*HEUXLNVDDQZLM]LQJ
%UXNVDQYLVQLQJHQ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Please read this installation guide
Please take the time to follow this installation guide carefully. It will help you set up
and operate your system properly, and enjoy all of its advanced features. Save your
installation guide for future reference.
WARNING: To reduce the risk of fire or electric shock, do not expose the system to
rain or moisture.
WARNING: This apparatus shall not be exposed to dripping or splashing, and
objects filled with liquids, such as vases, shall not be placed on the apparatus. As with
any electronic products, use care not to spill liquids in any part of the system. Liquids
can cause a failure and/or a fire hazard.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous volt-
age within the system enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle, as marked on the sys-
tem, is intended to alert the user to the presence of important operating
and maintenance instructions in this installation guide.
CAUTION: No naked flame sources, such as lighted candles, should be placed on
the apparatus.
This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage
Directive 73/23/EEC. The complete Declaration of Conformity can be found on
©2005 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise
used without prior written permission. All trademarks referenced herein are property of Bose Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About your LIFESTYLE® system VS-1 video expander . . . . . . . . . . . .
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding a location for the VS-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
5
Connecting the VS-1 to Your Media Center . . . . . . . . . . . . . . . .
If you have a LIFESTYLE® system in your home . . . . . . . . . . . . . . . . .
Connecting the Quadra cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
6
Your Connection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your TV connection panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choosing the TV connection type . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
7
For a Component Connection Between Your TV and the VS-1 . .
Connecting your TV to the VS-1 (Component) . . . . . . . . . . . . . . . . . .
Choosing connection types for your video sources . . . . . . . . . . . . . .
Connecting your sources to the VS-1 . . . . . . . . . . . . . . . . . . . . . . . . .
8
8
9
9
For an S-Video Connection Between Your TV and the VS-1 . . . . 10
Connecting your TV to the VS-1 (S-Video) . . . . . . . . . . . . . . . . . . . . . 10
Choosing connection types for your video sources . . . . . . . . . . . . . . 11
Connecting your sources to the VS-1 . . . . . . . . . . . . . . . . . . . . . . . . . 11
For a Composite Connection Between Your TV and the VS-1 . . 12
Connecting your TV to the VS-1 (Composite) . . . . . . . . . . . . . . . . . . . 12
Connecting your sources to the VS-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13
Source Audio Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Program Recording Connections . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting your cable/satellite box to your VCR/DVR . . . . . . . . . . . . 15
Recording programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Updating the system software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Activating component video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Mounting Your VS-1 on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recommended hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Maintaining Your VS-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Contacting Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About your LIFESTYLE® system
VS-1 video expander
The LIFESTYLE® system VS-1 video expander is designed to sim-
plify your system setup and operation. After setting up the VS-1,
pressing a source button on your LIFESTYLE® system remote
selects audio and video at the same time.
VS-1 video
expander
Software update disc
• Designed to work with LIFESTYLE® 48, 38, 28 Series II and 18
Series II DVD home entertainment systems.
• Provides component, S-Video, and composite video outputs for
your TV.
• Provides component, S-Video, and composite inputs for your
VCR, cable/satellite box, or other audio/video source.
Quadra cable (attached)
• Converts a composite input to an S-Video or component output;
converts an S-Video input to a component output.
Component video cable
• Compatible with high-definition TV (HDTV) and progressive scan
TV formats.
If you need additional cables
Unpacking
Your VS-1 includes one component video cable. Additional cables may be needed to set
up the VS-1 with your LIFESTYLE® system. To determine if you need any additional cables,
we suggest that you read through this guide before you begin the actual setup. Additional
cables can be purchased from your Bose dealer or your local electronics retailer.
WARNING: To avoid danger of suffocation, keep the
plastic bags out of the reach of children.
Carefully unpack the VS-1 video expander. Check to be sure your
system includes the parts shown on this page. Save all packing
materials in case you need to repack and transport your product.
If any part of the product appears damaged, do not attempt to use it.
Notify Bose or your authorized Bose dealer immediately. For Bose
contact information, refer to the address sheet included in the carton.
For your records
Now is a good time to find the serial number on the bottom of the VS-1 video expander.
Please record it here and on your Product Registration Card. This provides easy access
to this number if you ever need to contact Bose® Customer Service.
Finding a location for the VS-1
Serial number: _________________________
You can position the VS-1 on a shelf behind your media center or
behind your TV, or you can mount it on the back of an entertainment
center or on a wall. To mount it on a wall, see “Mounting Your VS-1
on a Wall” on page 18.
Dealer name: ________________________________________________________________
Dealer phone: ____________________________ Purchase date:___________________
Be sure to fill out your product registration card and mail it to Bose.
Please keep your sales receipt and product registration together with this owner’s guide.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the VS-1 to Your Media Center
If you have a LIFESTYLE® system
in your home
If you already have set up a LIFESTYLE® system in
your home, complete the following steps. Other-
wise, skip to “Connecting the Quadra cable.”
Video cables
Media center rear panel
1. Turn off your LIFESTYLE® system.
DC power
2. Unplug the media center power module and
cord
disconnect the DC power cord from the media
center.
Media center power module
Video cables
3. Remove any video cables from the Video OUT
and Video IN jacks on the media center.
Connecting the Quadra cable
Connect the Quadra cable from the VS-1 video
expander to the back of your media center:
Media center rear panel
1. Insert the plug labelled “Serial Data” into the
Serial Data jack on the media center.
2. Insert the plug labelled “DC Power” into the DC
Power jack on the media center.
WARNING: The VS-1 must be
used only with the media center
power supply module that came
with your LIFESTYLE® DVD home
entertainment system.
3. Insert the plug labelled “Composite Video” into
the Composite Video OUT jack on the media
center.
DC Power
S-Video
Composite Video
Serial Data
4. Insert the plug labelled “S-Video” into the S-
Video OUT jack on the media center.
VS-1
Quadra
cable
Media center power module
5. Connect the DC power cable from the media
center power module to the DC Power IN jack
on the end of the VS-1 video expander.
DC Power IN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Connection Options
Your TV connection panel
Your TV may have more than one type of video input
connection. Each type provides a different level of
video image quality.
S-Video
Good quality
Component
Best quality
Examine the rear panel of your TV and determine
whether it has composite, S-Video, or component
video input jacks.
Composite
(Green)
Standard quality
(Yellow)
(Blue)
(Red)
This is only an example
of a TV connection
panel. Your TV may not
have the exact same
number and types of
connections. Refer to
the owner’s guide that
came with your TV.
TV connection panel
Choosing the TV connection type
From the video input jacks on the back of your TV,
choose the type that provides the highest level of
video image quality. Place a check mark next to the
type of video input connection you plan to use.
Check TV connection
Video
Quality
one
type
Cable Type
Component
Best
Your choice determines which page you turn to for
instructions on connecting your TV and other video
sources to your VS-1:
To help you make color-
coded connections, a
color guide is provided
inside the back cover.
• If you chose Component, go to page 8.
• If you chose S-Video, go to page 10.
• If you chose Composite, go to page 12.
Supplied with the VS-1
S-Video
Good
Supplied with your LIFESTYLE system
Composite
Standard
Supplied with your LIFESTYLE system
7
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Component Connection Between Your TV and the VS-1
Connecting your TV to the VS-1 (Component)
Follow the instructions on this page and the next if you decided to connect
your TV to the VS-1 using a component video cable.
You can use the component video cable included in the carton to connect
your TV to the VS-1.
1. Plug one end of the component video cable into the component jacks
on the rear of your TV. Be sure to match the color of each plug to the
color of each jack.
2. Plug the other end of the component video cable into the Video OUT-
PUT Component jacks on the VS-1. Again, be sure to match the color
of each plug to the color of each jack.
(Green)
(Red)
(Blue)
3. Turn to page 9 for instructions on connecting your video sources to the
VS-1.
For best video performance, you must activate the
component video function in your media center. For
instructions, see “Activating component video” on
page 16.
TV connection panel
Component video
cable (supplied)
When switching between sources using a component
connection, the VS-1 component output may sometimes
change between a progressive scan format and a non-
progressive scan format. Some TVs may not be able to
handle both interlaced and HD formats on the same
input. Please refer to your TV owner’s guide to learn
about the component input capabilities of your TV.
VS-1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Component Connection Between Your TV and the VS-1
Choosing connection types for your video sources
1. Look at the rear panel of all your sources to determine what types of video output con-
nectors they have.
2. In the following table, check off the type of video input connection you plan to use for
each of your video sources. Choose the type of connection that provides the highest
level of video image quality. We recommend using a component connection if it is
available.
If any of your sources do not have component video jacks, you can use
either an S-Video or Composite connection. Remember, the VS-1 converts
either of these up to component video format.
AUX
Connection
type
Video
Quality
VCR
CBL-SAT (Other)
Component
Best
S-Video
Good
Composite
Standard
Connecting your sources to the VS-1
1. Plug one end of the appropriate video cable into the selected jack(s) on your video
source. If you are making a component connection, be sure to match the color of the
plug to the color of the jack.
2. Plug the other end of the video cable into the appropriate Video INPUT jack(s) on the
VS-1. Again, if you are making a component connection, be sure to match the color of
the plug to the color of the jack.
3. Turn to “Source Audio Connections” on page 14.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
For an S-Video Connection Between Your TV and the VS-1
Connecting your TV to the VS-1 (S-Video)
Follow the instructions on this page and the next if you decided to
connect your TV to the VS-1 using an S-Video cable.
You can use the S-Video cable included with your LIFESTYLE® system
to make this connection.
1. Plug one end of the S-Video cable into the S-Video jack on the
rear of your TV.
2. Plug the other end of the S-Video cable into the Video OUTPUT
S-Video jack on the VS-1.
3. Turn to page 11 for instructions on connecting your video sources
to the VS-1.
S-Video cable
(Supplied with
your LIFESTYLE
system.)
TV connection
panel
VS-1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
For an S-Video Connection Between Your TV and the VS-1
Choosing connection types for your video sources
If you connected your TV to the VS-1 using an S-Video cable, you can only use S-Video
and Composite connections for source inputs even though a source may have compo-
nent output connections.
1. Examine the rear panel of all your source devices to determine what types of video
output connectors they have.
2. In the following table, place a check next to the type of video input connection you
plan to use for each of your video sources. Choose the type of connection that pro-
vides the highest level of video image quality. We recommend using an S-Video
connection if it is available.
If any of your sources do not have an S-Video jack, you can use a Composite
connection. Remember, the VS-1 converts this up to S-Video format.
DO NOT USE
AUX
Connection
type
Video
Quality
VCR
CBL-SAT (Other)
S-Video
Good
Composite
Standard
DO NOT USE
Connecting your sources to the VS-1
After obtaining the cable(s) you need:
1. Plug one end of the video cable into the appropriate jack on the rear of your video
device.
2. Plug the other end of the video cable into the appropriate Video INPUT jack(s) on
the VS-1.
3. Turn to “Source Audio Connections” on page 14.
DO NOT USE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Composite Connection Between Your TV and the VS-1
Connecting your TV to the VS-1 (Composite)
Follow the instructions on this page and the next if you decided to con-
nect your TV to the VS-1 using a composite video cable.
You can use the composite video cable included with your LIFESTYLE®
system to make this connection.
1. Plug one end of the composite video cable into the composite video
jack on the rear of your TV.
2. Plug the other end of the composite video cable into the Video OUT-
PUT Composite jack on the VS-1.
3. Turn to page 13 for instructions on connecting your video sources to
the VS-1.
Composite cable
(Supplied with
your LIFESTYLE
system.)
TV connection
panel
VS-1
12
Download from Www.Somanuals.com. All Manuals Search And Download.
For a Composite Connection Between Your TV and the VS-1
Connecting your sources to the VS-1
If you connected your TV to the VS-1 using a composite video cable, you
can only use composite connections for source inputs.
You need to obtain a composite video cable to make this connection.
1. Plug one end of the composite video cable into the composite jack on
the video source.
2. Plug the other end of the composite video cable into the composite
Video INPUT jack on the VS-1.
3. Turn to “Source Audio Connections” on page 14.
DO NOT USE
DO NOT USE
DO NOT USE
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Source Audio Connections
Now that all the video connections are made, you can
connect the audio sources to the media center.
Connect the audio OUT jacks from all your sources to
the appropriate audio IN jacks on the rear panel of
your LIFESTYLE® media center.
For more information on connecting audio sources to
the media center, refer to your LIFESTYLE® system
installation guide.
LIFESTYLE® media center rear panel
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Recording Connections
Connecting your cable/satellite box
to your VCR/DVR
If you occasionally want to record programs from your
cable service, you need to connect your cable/satellite
box to your VCR or DVR. The diagram on this page is an
example of how this equipment might typically be
connected.
Before you start, make sure that your cable/satellite box
and VCR/DVR have the necessary inputs and outputs
available.
2
1
Previously
made
connections
1
Connect an unused video output on your cable/satel-
lite box to an unused video input on your VCR/DVR.
Choose the connection type that provides the highest
level of image quality. Refer to page 7.
Previously
made
connections
2
Connect an unused audio output on your cable/satel-
lite box to an unused audio input on your VCR/DVR.
Recording programs
Your LIFESTYLE system does not need to select the
source you want to record. You can potentially watch one
program source while recording another.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Information
Updating the system software
Your DVD home entertainment system might need a software update to enable it to
operate the VS-1. For example, if you cannot see a picture on your TV after installing
the VS-1, you need to update the system software. A software update disc is
included in the carton with your VS-1.
To run the software update disc:
1. Turn on your LIFESTYLE® system.
2. Load the software update disc into the disc player.
3. Follow the instructions included with the software update disc.
Activating component video
Front panel door – lifts up
To use a component video connection between your TV and media center, complete
the following steps to enable your media center to output component video signals.
This must be done before you can view any video image on your TV.
1. Make sure your media center is turned off.
2. Lift up the front door of the media center to access the control buttons.
3. Press and hold Enter.
4. Press Store as many times as necessary until VIDEO appears on the media
center display.
5. Release the Enter button.
Disc tray
Display window
6. Press Volume up or down until the video setting you want is displayed:
•
•
•
NTSC COMPONENT – for a component only connection in North America
PAL COMPONENT – for a component only connection outside North America
Media center
control buttons
NTSC PROGRESSIVE – for a component connection and progressive scan in
North America (PAL progressive is not supported)
7. Press Store to confirm the selection and return the system to normal operation.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Information
Switching sources
After adding the VS-1 to your system setup, switching sources is greatly
simplified. Just press the remote button (CD/DVD, VCR, CBL/SAT, or AUX)
for the source you want to use. If you select one of the sources connected
to the VS-1, make sure the source is turned on.
Selecting the TV source
If you select the TV source, you will hear the audio source that is con-
nected to the TV audio input jack on your media center, but your TV will
display the video of the last video source selected. You may need to select
another video input on your TV to see the corresponding video. When you
press TV on the remote, “Choose TV INPUT” appears on the media center
display, reminding you to switch TV inputs if necessary.
TV
Choose TV INPUT
Selecting a non-video source
If you select a non-video source (such as FM, AM, audio CD), the VS-1
continues to send the output of the last-selected video source to your TV
screen. This feature allows you to view the video portion of a program on
your TV while listening to the audio portion from another source. For
example, you can watch a ball game while listening to the program audio
from a local radio station.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting Your VS-1 on a Wall
Required tools
Install two screws eight inches
apart. Leave ¼ in (6 mm) between
wall surface and screw head.
1
Recommended hardware
For solid wood
No. 8 x 1½-in
(M4 x 36 mm)
wood screws
1
8
-in (3.5 mm) drill bit
Position the VS-1 over the screws
so that it is flush with the wall.
Lower the VS-1 onto the screws
to lock it in place.
3
2
For wallboard
No. 8 (M4)
wall anchor
Use drill size
specified for
type of wall
anchor used.
No. 8 x 1½-in (M4 x 36 mm) wood or machine
screws (depends on type of wall anchor)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining Your VS-1
Cleaning
• Use only a soft, dry cloth to clean the outside of the VS-1.
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
• Do not use any sprays near the VS-1.
Troubleshooting
Problem
What to do
System will not turn on
•
•
Make sure the DC output cable from the media center power supply is plugged into the VS-1
and that the VS-1 plug labelled “DC Power” is connected to the media center.
Make sure the media center power supply is plugged into an AC receptacle.
No picture on TV
•
•
•
Make sure the VS-1 Quadra cable is correctly connected to the media center.
Make sure you connected your TV to the TV output connector on the VS-1.
If you connected the VS-1 to your TV using a component connection, make sure you activated
the component output in your media center. See “Updating the system software” on page 16.
Make sure you have selected the correct video input on your TV.
•
•
Run the software update disc to make sure your system has been enabled to operate the VS-1.
The wrong picture
appears on my TV for
the source I selected
•
•
•
•
Make sure your sources are connected to the appropriate VS-1 inputs.
Make sure the Serial Data plug from the VS-1 is fully inserted into the media center jack.
Make sure you have selected the correct video input on your TV.
Run the software update disc to make sure your system has been enabled to operate the VS-1.
Some sources do not
appear on my TV
•
•
Make sure your sources are connected to the appropriate VS-1 inputs.
Make sure you have not used a source that outputs a video format that is higher in quality than
what your TV can accept.
•
•
If you are using both high definition and standard definition sources, make sure you are using a
TV input that can handle multiple formats (480i to 1080i).
I see a picture on my TV
even though I selected
an audio source
You are experiencing a feature that allows you to view the video portion of a program on your
TV while listening to the audio portion from another source. For example, you can watch a ball
game while listening to the program audio from a local radio station.
(Stored, FM, AM, CD)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining Your VS-1
Technical information
Dimensions
Size of the housing with the RCA jacks (excluding cable and bend relief):
12.8" W x 4.1" D x 1.4" H
(32.41 cm x 10.48 cm x 3.61 cm)
VS-1 power rating
USA/Canada: 3.5 W
International: 3.5 W
Video inputs
Component: Y, Pb, Pr
S-Video: Luminance 1Vp-p, Chrominance 0.3Vp-p
Composite: NTSC or PAL format 1Vp-p with sync 75Ω
Video output
Component: Y, Pb, Pr
S-Video: Luminance 1Vp-p, Chrominance 0.3Vp-p
Composite: NTSC or PAL format 1Vp-p with sync 75Ω
Weight (approximate)
1.25 lb (.57 kg)
Finish
Molded plastic
Contacting Customer Service
If you need help solving problems while setting up this product, contact Bose® Customer
Service. See the address and phone number list included with your system.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining Your VS-1
Limited Warranty
Bose Corporation
The Mountain
Framingham, MA 01701
Other Rights:
EXCLUSIVE REMEDY:
THIS LIMITED WARRANTY IS FULLY TRANSFERABLE PROVIDED THAT THE CURRENT
OWNER FURNISHES THE ORIGINAL PROOF OF PURCHASE FROM AN AUTHORIZED
BOSE DEALER. THE MAXIMUM LIABILITY OF BOSE SHALL NOT EXCEED THE
ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT. IN NO EVENT SHALL
BOSE BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAM-
AGES. SOME PLACES DO NOT ALLOW LIMITATIONS ON THE EXCLUSION OR LIMITA-
TION OF RELIEF, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
OF THE LIMITATION OF LIABILITY TO SPECIFIED AMOUNTS, SO THE ABOVE LIMITA-
TIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
What is covered:
All parts defective in material and workmanship. This limited warranty for the LIFESTYLE®
system VS-1 Video Expander covers the functionality of the system for its normal, intended
use as specified in the Owner’s Guide and does not cover a malfunction that has resulted
from improper or unreasonable use or maintenance, accident, excess moisture, improper
packing, lightning, power surges, or unauthorized tampering, alteration or modification
while not under the control of Bose. Bose® systems are not designed to be used in every
environment, so please review your Owner’s Guide.
WHERE PERMITTED, THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU OF
ANY OTHER WRITTEN WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR
ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
OTHER CONDITIONS:
FOR YOUR BENEFIT, WE RECOMMEND THAT YOU RECORD YOUR SERIAL NUM-
BERS(S), FOUND ON THE PRODUCT(S), AND OTHER PURCHASE INFORMATION, AND
KEEP IT WITH YOUR PERSONAL RECORDS ALONG WITH PROOF OF PURCHASE. IF
NECESSARY, THIS INFORMATION WILL ALLOW US TO BETTER SERVE YOUR NEEDS.
Notwithstanding the above, in the United States, where applicable, if you qualify as a
“consumer” under the Magnuson-Moss Warranty Act, then you may be entitled to any
implied warranties allowed by law for the period of the express Limited Warranty as set
forth below. Some states do not allow limitations on how long an implied Limited War-
ranty lasts, so the above limitation may not apply to you.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC RIGHTS SUBJECT TO SPECIFIED
CONDITIONS. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH APPLY TO THE
PRODUCT YOU HAVE ACQUIRED. THESE LEGAL RIGHTS VARY FROM STATE TO
STATE OR COUNTRY TO COUNTRY. SOME PLACES DO NOT ALLOW THE EXCLU-
SION, RESTRICTION OR MODIFICATION OF CERTAIN IMPLIED RIGHTS OR THEIR
EFFECT. IN THOSE SITUATIONS THIS LIMITED WARRANTY WILL ONLY APPLY TO THE
EXTENT THAT THE APPLICABLE LAW ALLOWS. OTHER LAWS PROVIDE YOU WITH A
STATUTORY CLAIM AGAINST THE SELLER.
For how long:
In countries where the duration of the warranty is not determined by statute, the Bose
Limited Warranty lasts one year from the purchase date. For countries where minimum
warranty terms are determined by statute, the warranty term is the longer of the statutory
period or the term listed above.
The laws of your state or country may provide you with legal claims against the seller or
manufacturer of this product. The Limited Warranty does not affect those rights.
What we will do:
Remedies:
At our option, we will repair or replace any defective parts within a reasonable period of
time and free of charge.
The provisions of this Limited Warranty are in lieu of any other warranties or conditions,
except those provided by law. This Limited Warranty does not affect any legal rights pro-
vided to you by law and does not preclude any legal remedy you may have under the law.
How you can obtain warranty service:
1. You can ship the system to either a Bose Service Agency or to Bose directly with a
proof of purchase from an authorized dealer. Please:
This Limited Warranty is fully transferable provided that the current owner furnishes the
original proof of purchase from an authorized Bose dealer.
A. Properly and carefully pack the product for shipping.
This Limited Warranty is void if the label bearing the serial number has been removed or
defaced.
If you need a carton for shipping, contact Bose for a new carton
B. Label and ship the product to the appropriate Bose location
C. Please contact Bose to get a return reference number. Place this number promi-
nently on the outside of the carton.
2. You can return the system with proof of purchase from an authorized dealer to a
Bose Service Agency or directly to Bose. Proof of purchase is not required where it
is excluded by statute.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining Your VS-1
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining Your VS-1
23
Download from Www.Somanuals.com. All Manuals Search And Download.
‹ꢀꢁꢁ5 %RVHꢂ&RUSRUDWLRQꢃꢂ7KHꢂ0RXQWDLQꢃ
)UDPLQJKDPꢃꢂ0$ꢂꢁꢄꢅꢁꢄꢆꢇꢄꢈꢉꢂ86$
ꢀꢉꢀꢉꢈꢀꢂ$0ꢂ5HYꢊꢁꢁꢂ&&0ꢆꢁꢁꢄꢄꢈꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
|