Video | LTC 0630 Series Dinion2X Day/Night Camera
LTC 0630 Series Dinion2X Day/Night
Camera
u Advanced Image Processing Technology
u Improved XF-Dynamic engine with SmartBLC
u Detail enhancement
u True Day/Night performance with switchable filter
u 1/2-inch CCD sensor
The LTC 0630 Dinion2X Day/Night camera is a high-
performance, surveillance camera. It uses a 1/2-inch
CCD sensor and incorporates advanced digital signal
processing for outstanding picture performance.
The advanced image processing enhances sensitivity;
the improved XF-Dynamic engine extends the dynamic
range. This unique combination provides a sharper,
more detailed image with outstanding accuracy in
color reproduction even under harsh lighting
conditions.
The Dinion2X camera is easy to install and ready to
use, and offers the best solution for demanding scene
conditions. The day/night feature ensures the highest
image quality possible at any time. Depending on the
available light the camera will automatically switch
from color to monochrome.
settings are required, the camera parameters can be
individually set using the control buttons on the side
of the camera and an On-screen Display (OSD).
Functions
XF-Dynamic and Image Processing
Improved XF-Dynamic technology and highly accurate
digital signal processing optimally captures the detail
in both bright highlights and deep shadows
simultaneously. The Dinion2X maximizes the
information visible in the picture even with strong
backlighting.
SmartBLC
Turn on SmartBLC to automatically compensate the
image without the need for complicated set-up.
All Dinion cameras are supplied ready to operate.
Simply attach the lens, connect video and then power.
Six distinct pre-programmed operational modes are
stored in the camera. Recall the mode that suits your
application for optimized performance.
The camera automatically detects the lens type. The
lens wizard ensures accurate back-focusing for
perfectly sharp pictures at all times. For especially
challenging situations where fine tuning or special
Detail Enhancement
Features such as Autoblack and Sharpness further
improve the details in a scene, pixel by pixel.
Day/Night Mode
The day/night mode provides enhanced night viewing
by increasing the IR sensitivity. The IR filter can switch
from color to monochrome automatically by either
sensing the illumination level or via the alarm input.
The filter can be switched manually via the alarm
Download from Www.Somanuals.com. All Manuals Search And Download.
3 | LTC 0630 Series Dinion2X Day/Night Camera
Installation/configuration notes
12 VDC ±10%
24 VAC ±10%
12 VDC ±10%
230 VAC ±10%
120 VAC ±10%
Dimensions
LTC 0630/21
60 Hz
118 (4.646)
LTC 0630/51
LTC 0630/61
50 Hz
60 Hz
85 (3.346)
34 (1.339)
1/4"-20 UNC
Power Consumption
350 mA (12 VDC)
250 mA (24 VAC)
70 mA (120-240 VAC)
CCD Type
1/2-inch interline
Active Pixels
PAL Model:
NTSC Model
752 x 582
768 x 494
Dinion2X D/N Camera
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable
picture
(50 IRE)
Usable picture
(30 IRE)
1/4"-20 UNC
48 (1.889)
Color
1.40 lx
0.31 lx
0.0991 lx
(0.13 fc)
(0.029 fc)
(0.0097 fc)
122 (4.803)
67 (2.638)
Color
+ SensUp 10x
0.14 lx
(0.013 fc)
0.031 lx
(0.0029 fc)
0.00991 lx
(0.0009 fc)
Monochrome
0.57 lx
(0.053 fc)
0.121 lx
(0.0112 fc)
0.0391 lx
(0.0036 fc)
Monochrome
+ SensUp 10x
0.057 lx
(0.0053 f
c)
0.0121 lx
(0.00112 fc
)
0.00391 lx
(0.00036 fc)
Horizontal Resolution
Signal-to-Noise Ratio
Video Output
540 TVL
>50 dB
Composite video 1 Vpp, 75 ohm
mm (in)
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Parts included
Shutter
Auto (1/50 [1/60] to 1/10000)
selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
Quantit
y
Component
1
1
1
LTC 0630 Series Dinion2X Day\Night Camera
C/CS – mount conversion ring
Spare male 4 – pin lens connector
Lens not included
Sensitivity up
Day/Night
Adjustable from Off up to 10x
Color, Mono, Auto
Auto Black
Automatic continuous, Off
XF-Dynamic, SmartBLC
96 dB (16-bit image processing)
Auto, On/off selectable
Dynamic engine
Dynamic range
Technical specifications
Electrical
Dynamic Noise
Reduction
Model No.
Rated Voltage
24 VAC ±10%
Rated Frequency
50 Hz
Sharpness
Sharpness enhancement level selectable
LTC 0630/11
Download from Www.Somanuals.com. All Manuals Search And Download.
4 | LTC 0630 Series Dinion2X Day/Night Camera
SmartBLC
On/Off
Operating Humidity
Storage Humidity
20% to 93% RH
up to 98% RH
AGC
AGC On or Off (0 – 30 dB) selectable
On/Off
Peak White Invert
White Balance
Ordering information
ATW, ATWhold and manual (2500 to
10000K)
LTC 0630/11 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, PAL, 2X DSP, 24 VAC/12 VDC,
50 Hz
Alarm Output
VMD or Bilinx
Order number LTC 0630/11
Alarm Input (TTL)
Profile switching, +3.3 V nominal,
+40 VDC max.
LTC 0630/21 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, NTSC, 2X DSP, 24 VAC/12 VDC,
60 Hz
Alarm Output Relay
30 VAC or +40 VDC, Max 0.5 A
continuous, 10 VA
Order number LTC 0630/21
External Synchronization
Input
75 ohm or high impedance selectable
LTC 0630/51 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, PAL, 2X DSP, 230 VAC, 50 Hz
Order number LTC 0630/51
Cable Compensation
Up to 1000 m (3000 ft) coax without
external amplifiers (automatic set-up in
combination with Bilinx coaxial
communication)
LTC 0630/61 Dinion 2X Day/Night Camera
1/2—inch, 540 TVL, NTSC, 2X DSP, 120 VAC, 60 Hz
Order number LTC 0630/61
Camera ID
17 character editable string, position
selectable
EX12LED8M LED Infrared Illuminator
Infrared w/ 42 LEDs, 850 nm, Med Beam 30°, 12/24
VRB, 0.5 amp, Photocell
Test Pattern Generator
Color bars 100%, Greyscale 11-step,
Sawtooth 2H, Checker board, Cross
hatch, UV plane
Order number EX12LED8M
Lens Types
Lens Mount
Manual, DC- and Video-Iris auto-detect
with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 VDC ±0.5, max. 50 mA
continuous
EX12LED9M LED Infrared Illuminator
Infrared w/ 42 LEDs, 940 nm, Med Beam 30°, 12/24
VRB, 0.5 amp, Photocell
Order number EX12LED9M
CS (max lens protrusion 5 mm, 0.2 inch),
C-mount compatible with supplied adapter
ring
EX12LED8W LED Infrared Illuminator
Infrared w/ 42 LEDs, 850 nm, Wide Beam 60°, 12/24
VRB, 0.5 amp, Photocell
Modes
6 preset programmable modes
Order number EX12LED8W
Remote Control
Bilinx coaxial bi-directional
communication
EX12LED9W LED Infrared Illuminator
Infrared w/ 42 LEDs, 940 nm, Wide Beam 60°, 12/24
VRB, 0.5 amp, Photocell
Video Motion Detection
Privacy Masking
One area, fully programmable
Order number EX12LED9W
Four independent areas, fully
programmable
EX12LED‑3BD‑8M Infrared Illuminator
EX12LED IR Illuminator, 850 nm, 30 deg beam
Order number EX12LED-3BD-8M
Controls
OSD with soft-key operation (multi-lingual)
Mechanical
EX12LED‑3BD‑8W Infrared Illuminator
EX12LED, IR Illuminator, 850 nm, 60 deg beam
Order number EX12LED-3BD-8W
Dimensions (H x W x L)
58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch)
without lens
Weight
450 g (0.99 lbs) without lens
RAL 9007 Metallic Titanium
EX12LED‑3BD‑9M Infrared Illuminator
EX12LED IR Illuminator, 940 nm, 30 deg beam
Order number EX12LED-3BD-9M
Color
Tripod Mount
Bottom (isolated) and top 1/4-inch
20 UNC
EX12LED‑3BD‑9W Infrared Illuminator
EX12LED, IR Illuminator, 940 nm, 60 deg beam
Order number EX12LED-3BD-9W
Environmental
Operating Temperature
Storage Temperature
-20°C to +55°C (-4°F to 131°F)
-40°C to +70°C (-40°F to +158°F)
LTC 3764/20 Varifocal Lens IR corrected
1/2-inch, 4 – 12 mm, DC-iris, C-mount F1.2-360, 4-pin
Order number LTC 3764/20
Download from Www.Somanuals.com. All Manuals Search And Download.
5 | LTC 0630 Series Dinion2X Day/Night Camera
LTC 3774/30 Varifocal Lens IR corrected
1/2-inch, 10 – 40 mm, DC-iris, C-mount F1.4-360, 4-pin
Order number LTC 3774/30
TC8235GIT Ground Loop Isolation Transformer
Order number TC8235GIT
UPA-2410-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 10 VA Out
Order number UPA-2410-60
UPA-2430-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 30 VA Out
Order number UPA-2430-60
UPA-2450-60 Power Supply, 120 V, 60 Hz
Indoor, 120 VAC, 60 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-60
UPA-2420-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 20 VA Out
Order number UPA-2420-50
UPA-2450-50 Power Supply, 220 V, 50 Hz
Indoor, 220 VAC, 50 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-50
Accessories
S1374 Adapter
converts C mount lens to CS mount camera
Order number S1374
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB Adaptor
Order number VP-CFGSFT
Represented by:
Americas:
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
China:
America Latina:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone +86 21 22181111
Fax: +86 21 22182398
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: +55 19 2103 2860
Fax: +55 19 2103 2862
© Bosch Security Systems 2013 | Data subject to change without notice
2011301259 | en, V1, 29. Mar 2013
Download from Www.Somanuals.com. All Manuals Search And Download.
|