Bosch Appliances Home Security System VIPX 1600X FM4 User Manual

VIP X1600 XFM4  
VIP-X1600-XFM4A/VIP-X1600-XFM4B  
en Quick Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
en | Scope of Delivery  
VIP X1600 XFM4  
2
Scope of Delivery  
VIP X1600 XFM4A or VIP X1600 XFM4B encoder module  
Two terminal blocks  
Four screws for installation in the base  
Quick Installation Guide  
F.01U.088.580 | V4.0 | 2009.03  
Quick Installation Guide  
Bosch Security Systems  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIP X1600 XFM4  
Unpacking | en  
4
3
Unpacking  
Please check the delivery for completeness and integrity.  
Have your device checked by Bosch Security Systems if  
you detect any damage!  
Bosch Security Systems  
Quick Installation Guide  
F.01U.088.580 | V4.0 | 2009.03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
en | Installing and Connecting  
VIP X1600 XFM4  
4
Installing and Connecting  
4.1  
Installing Modules  
Insert the module into the guide rails of the first slot and  
carefully push as far as it will go. If the first slot is already  
equipped you can equip one of the other unused slots.  
First, remove the respective cover plate by unscrewing the  
screw and bending the cover plate upwards.  
Insert the four screws provided in the bores on the module  
and tighten.  
After a module has been removed, you must reseal the  
empty slot with a cover to ensure correct air circulation.  
F.01U.088.580 | V4.0 | 2009.03  
Quick Installation Guide  
Bosch Security Systems  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIP X1600 XFM4  
Installing and Connecting | en  
6
4.2  
Connecting Cameras  
Connect one camera to each, the Video In 1 socket to the  
Video In 4 socket.  
Bosch Security Systems  
Quick Installation Guide  
F.01U.088.580 | V4.0 | 2009.03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
en | Installing and Connecting  
VIP X1600 XFM4  
4.3  
Alarm and Switch Connections  
Connect the alarm lines to terminals lN1 to IN4 and GND  
on the 8-pin terminal block.  
Connect the relay lines to the two R1 terminals on the 8-  
pin terminal block.  
Secure the terminal block onto the left-hand part of the  
male multipoint connector.  
CAUTION!  
A maximum load of 30 V and 500 mA may be applied to the relay  
contact.  
!
F.01U.088.580 | V4.0 | 2009.03  
Quick Installation Guide  
Bosch Security Systems  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIP X1600 XFM4  
Installing and Connecting | en  
8
4.4  
Serial Interface  
Connect the serial-connection lines to the corresponding  
terminals on the 6-pin terminal block as required.  
Secure the terminal block onto the right-hand part of the  
male multipoint connector.  
Bosch Security Systems  
Quick Installation Guide  
F.01U.088.580 | V4.0 | 2009.03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
en | Installing and Connecting  
VIP X1600 XFM4  
4.5  
Audio Connections  
Use the Audio In and Audio Out sockets for the audio line  
connections.  
Line In  
Input voltage 5.5 V  
max.,  
p-p  
impedance 9 kOhm typ.  
Output voltage 3 V at 10 kOhm /  
Line Out  
p-p  
1.7 V  
at 16 Ohm typ.  
p-p  
F.01U.088.580 | V4.0 | 2009.03  
Quick Installation Guide  
Bosch Security Systems  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIP X1600 XFM4  
Configuration | en 10  
5
Configuration  
5.1  
Assigning an IP Address  
If you have not already done so, install the  
Configuration Manager program from the product CD. The  
product CD is included in the scope of delivery for the  
base.  
Start Configuration Manager when the installation is  
completed. The network is scanned for compatible devices  
automatically.  
If the module is displayed in the list, right-click the entry  
and then click Unit network settings... in the popup menu.  
Enter the desired IP address (e.g. 192.168.0.116) in the  
Unit IP address field and click OK. The module is rebooted  
and the IP address is valid.  
Note:  
The module must be assigned a valid IP address and a matching  
subnet mask to operate on your network.  
Bosch Security Systems  
Quick Installation Guide  
F.01U.088.580 | V4.0 | 2009.03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 en | Configuration  
VIP X1600 XFM4  
5.2  
Testing the Configuration  
Launch the Web browser and enter the IP address of the  
module as the URL (e.g. http://192.168.0.116) to check  
that it is properly connected to the network.  
Use the links at the top of the pages to navigate.  
NOTICE!  
Set the graphics card of the computer to 16-bit or 32-bit color  
depth. Otherwise the computer cannot display the video  
images.  
F.01U.088.580 | V4.0 | 2009.03  
Quick Installation Guide  
Bosch Security Systems  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bosch Security Systems  
Robert-Koch-Straße 100  
D-85521 Ottobrunn  
Germany  
Telefon  
Fax  
089 6290-0  
089 6290-1020  
© Bosch Security Systems, 2009  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beko Washer WMB 751241 LA User Manual
Black Box Network Router VOE231A User Manual
Black Box Switch LE2425A User Manual
Bose DVD Player 28 User Manual
Boston Acoustics Portable Radio AM FM Radio User Manual
Breville Mixer BSB530XL User Manual
Bushnell Binoculars 111026 User Manual
Cabletron Systems Switch ELS100 User Manual
Campbell Hausfeld Pressure Washer CP5211 User Manual
Carrier Air Conditioner 38EN User Manual