Bosch Appliances Home Security System BLCC110U User Manual

Solution 64  
�  
User Guide  
EN Security System  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Solution 64 User Guide  
Contents  
Bosch Security Systems 09/06 BLCC110U  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Program Menu Tree  
Table 1: shows all of the system options in a tabular format. Each option can be access by pressing the Menu key and then drilling  
down using the arrow and OK keys until the required option is listed on the display. A quick way to jump to a particular option is to  
press the Menu key followed by the specific option number.  
You may be asked to enter your PIN when accessing some options.  
Example:  
To set a new call forward number enter MENU + 5 + 1 + 6 and then follow the on screen prompts.  
1
Access  
2
Areas  
3
Inputs  
4
Outputs  
1-0  
Commands  
2-0  
Commands  
3-0  
Command  
Zone Status  
Bypass Zones  
Set Chime Zones  
Set Part 2 Zones  
Smoke Sensor Reset  
4-0  
Commands  
1-0-0 Erase User  
2-0-0 Area Status  
3-0-0  
3-0-2  
3-0-3  
3-0-4  
3-0-5  
4-0-0 Output Status  
4-0-1 Turn Output On/Off  
2-0-1 Turn Area On/Off  
2-0-2 Turn All Areas On  
2-0-3 Turn All Areas Off  
2-0-4 Move To Area  
2-0-5 Chime On/Off  
1-1  
PIN Codes  
1-1-0 Change Own PIN  
1-1-1 Change Other PIN  
1-1-2 Add PIN  
4-1  
Output Properties  
4-1-0 Output Name  
1-1-3 Delete PIN  
3-1  
3-1-0  
Zone Properties  
Zone Name  
4-9  
Output Testing  
2-1  
Area Properties  
4-9-0 External Siren Test  
4-9-1 Internal Siren Test  
4-9-2 Strobe Test  
1-2  
Token  
2-1-0 Area Name  
1-2-0 Add Token  
1-2-1 Delete Token  
1-2-2 Token Status  
3-9  
3-9-0  
3-9-1  
Input Testing  
Walk Test All Zones  
Walk Test A Zone  
1-3  
RF Keyfob  
1-3-0 Add Keyfob  
1-3-1 Delete Keyfob  
1-4  
User Properties  
1-4-0 User Name  
1-4-1 Area Assignment  
1-4-4 Timer Group  
1-4-5 Access Assignment  
5
Comms  
6
Devices  
7
System  
5-0  
Commands  
6-0  
Commands  
7-0  
Commands  
Panel Status  
System Trouble  
History Log  
5-0-0 Set Domestic Number  
5-0-1 Call/Answer RAS  
5-0-2 Call Forward On/Off  
5-0-3 Check Web Email  
5-0-4 Email System Log  
6-0-0 LAN Status  
7-0-0  
7-0-1  
7-0-2  
6-1 Keypads  
6-1-0 Volume  
6-1-1 Contrast  
6-1-2 Backlight  
7-1  
7-1-0  
Clock  
Set Date & Time  
5-1  
Telephone Numbers  
5-1-5 Domestic Number  
5-1-6 Call Forward On  
5-1-7 Call Forward Off  
7-5  
Schedules (TEF)  
Name  
Time  
Day  
Function  
7-5-0  
7-5-1  
7-5-2  
7-5-3  
5-5  
Registration  
5-5-0 Customer  
7-6  
Holidays  
5-9  
Periodic Test  
7-6-0  
7-6-1  
Name  
Start Stop Dates  
5-9-0 Send Test Report  
7-7  
7-7-3  
System Options  
Keypad Hi/Lo Temp  
7-9  
7-9-0  
7-9-1  
System Testing  
Walk Test All Zones  
Battery Test  
Table 1: Control Panel Menu Tree  
Bosch Security Systems 09/06 BLCC110U  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
When a zone (such as a door or window) is closed, it is said to be  
‘normal. When the door or window is open, the zone is said to be  
‘faulted. When you turn your system on, you will usually want all  
of the zones in your system to be normal, although, you can turn  
your system on with faulted zones.  
Introduction  
Your system helps to secure life, property and investments  
against fire, theft and bodily harm. It consists of a keypad (or  
keypads), sensors such as motion detectors or devices located  
on doors and windows, and other sensing devices designed to  
detect the presence of smoke or combustion. The location and  
quantity of sensing devices will have already been discussed  
with you by your alarm installer.  
Zones Types  
There are two basic types of zones, Non 24-hour and 24-hour.  
See below.  
Control of your security system is achieved through the unique  
Graphic keypad, which displays all system information in written  
text and graphical symbols. Its versatility and ease of operation,  
make it ideal for any home or business application.  
Non 24-Hour Zones  
Non 24-hour zones respond to alarm conditions depending upon  
whether the system is turned on or off. They are programmed to  
either respond instantly to alarm conditions or to provide a delay  
for you to reach the keypad and turn the system off. Various  
zones will be located throughout your premises.  
Features  
When you turn your system on, you have the option of turning  
on all zones (All On), or just some of the zones (Part On). Refer  
to  
Listed below are the main features of the Solution 64 control  
panel.  
. Up to 64 Fully Programmable Zones  
. Fire Alarm Verification  
All On and Part On, on page 7 for more information.  
. Up to 48 Unique PINs  
. Up to 5 Relay Outputs (1 amp rating)  
. 3 Open Collector Outputs  
. Supervised Siren Driver  
. 8 Programmable Schedules  
Bypassed Zones  
A zone which has been bypassed will remain unarmed when  
the system is armed. You may need to bypass a zone when  
doing renovations in the building or if a sensor becomes faulty.  
Bypassed zones will reset the next time the system is disarmed.  
. Up To 8 Areas (Common Area Programmable)  
. Built-In Dialler  
24-Hour Zones  
. Up To 8 Fully Supervised Graphic Keypads  
. Keyswitch Input (Programmable)  
. 256 History Event Memory  
. EMI / Lightning Transient Protection  
. Programmable Via Keypad  
24-hour zones are always on and cannot be turned off, even  
when the system is turned off (disarmed). There are two types of  
24-hour zones, fire zones and non-fire zones.  
What Is An Area?  
The Solution 64 control panel comes defaulted and programmed  
for a single area configuration (Area 1), therefore, all zones are  
assigned to Area 1. The alarm system can be divided into 8  
individual areas running off the same control panel. In this case,  
the security company would assign different sensors (zones) to  
each area according to the area they belong.  
. Remote Programmable Via Upload/Download Software  
. Alarm Event Memory  
. Automatic Test Reports  
. Built-In Telephone Line Fail Monitor  
User’s Guide  
Example:  
This user’s guide shows you how to use and maintain your security  
system. It covers basic functions, such as turning the system on  
and off as well as some general programming. More complex  
programming and system configuration should be performed  
by your installer.  
Partitioning a commercial business to 4 individual areas may be  
as follows:  
Area 1 – Main entry/exit area  
Area 2 – Sales  
Many of the programming functions described in this guide  
will have already been programmed by your alarm installer  
while others may need to be programmed or changed by you.  
Depending on your particular system configuration some  
features described in this manual may not be available. Please  
discuss this with your alarm installer.  
Area 3 – Administration  
Area 4 – Dispatch  
Each area can be controlled individually as if they were separate  
alarm systems.  
All On  
Functions outlined in this user guide may require you to enter  
your PIN (Personal Identification Number) so make sure you  
choose a number that is easy to remember. For security reasons  
do not write this code down or give it to anyone else. If more  
than one person needs to operate the system then you should  
create a unique code for them if this has not been done by your  
installer. This guide will explain how to do this.  
When you turn an area All On, you are turning on all non 24-hour  
zones, both interior (motion detectors) and perimeter (doors and  
windows of the building).  
Part On  
When you turn an area Part On, you only turn on some of the  
non 24-hour zones. Your security company will program which  
zones are included in this portion. Part zones may include only  
the perimeter (doors and windows) or your system, or sensors in  
other areas of your premises. Check with your security company  
to learn which zones are Part zones.  
Please take the time to familiarise your self with the following  
terms before reading the rest of this guide.  
Zones  
A ‘Zone’ is a detection device, or group of devices connected  
to your security system. Zones are identified by the area they  
monitor, such as a front door, bedroom window or hallway.  
Faulted Zones  
Bosch Security Systems 09/06 BLCC110U  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Reporting Alarms  
Description  
Key  
Your system may be programmed to send reports to your security  
company. Once the report is complete, the system returns  
the telephone to normal operation (check with your security  
company).  
The [] key allows you to navigate  
through menus or to toggle characters  
when programming telephone numbers.  
Pressing The [] key will display current  
trouble conditions when the area that the  
keypad is displaying is disarmed.  
Your system makes repeated attempts to send reports to your  
security company. If your system fails to report, the keypad will  
display the ‘servicesymbol.  
Pressing the 1 and 3 keys together and  
holding them down for 2 seconds will  
cause a Panic alarm to be triggered. If  
programmed the sirens will sound and the  
monitoring station will be notified.  
+
for 2 sec  
About the Keypad  
Your keypad has 20 keys or buttons. The buttons allow you to  
input instructions and navigate the menu screens as required.  
Some buttons have a secondary function which is activated by  
holding them down for two seconds.  
Pressing the 4 and 6 keys together and  
holding them down for 2 seconds will cause  
a Fire alarm to be triggered. If programmed  
the sirens will sound and the monitoring  
station will be notified.  
+
for 2 sec  
Each button’s function is described below:  
Pressing the 7 and 9 keys together and  
holding them down for 2 seconds will  
cause a Medical alarm to be triggered. If  
programmed the sirens will sound and the  
monitoring station will be notified.  
Keypad Keys  
+
Description  
Key  
to  
for 2 sec  
The numeric keys allow you to enter you  
numbers when required  
Table 2: Keypad Keys and Their Function  
Use the [MENU] and the numeric keys to  
enter commands. The [MENU] key is also  
used to go back one level when navigating  
through menus or to exit a programming  
location without saving changes.  
Status Icons / LED’s  
The following table describes the function of each of the status  
icons.  
The [ON] key allows you to turn an area  
or output on. To turn all areas on at the  
same time when the system has been  
partitioned, press and hold the [ON] key  
for two seconds.  
Icon  
Status  
Meaning  
The keypad can display which areas (1 – 8) are  
turned on or off via the Area Icon Indicators. This  
programmable option can be disabled in MENU  
The [PART] key allows you to turn an area  
Part On. This key can also be used to  
bypass a zone or multiple zones when you  
press and hold for two seconds.  
On  
The area is turned All On or Part On  
The area is turned Off  
Off  
Flashing  
Fast  
The [OFF] key allows you to turn an area  
or output off. To turn all areas off at the  
same time when the system had been  
partitioned, press and hold the [OFF] key  
for two seconds.  
The area has an alarm  
On  
Flashing  
Flashing  
Off  
System power is normal  
System power is missing  
A fire alarm is active  
No fire alarm  
The [OK] key allows you to save any changes  
and exit the command.  
The [MAIL] key allows you to read stored  
mail. This key can also be used to initiate  
a dialler test when you press and hold for  
two seconds.  
Fire alarm in memory  
On  
(Turn the area All On and Off to Clear).  
The existing service or trouble condition  
has been acknowledged.  
On  
The [] key allows you to move the cursor  
left when programming text or telephone  
numbers.  
Off  
No service or trouble conditions exist  
A service or trouble condition is present  
that has not been acknowledged.  
The [] key allows you to move the cursor  
right when programming text or telephone  
numbers.  
Flashing  
On  
The area is turned Part On.  
The [] key allows you to navigate through  
menus or to toggle characters when  
programming telephone numbers.  
Off  
The area is not turned Part On.  
Bosch Security Systems 09/06 BLCC110U  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Icon  
Status  
Meaning  
After you turn an area All On, the keypad will  
sound 1 short beep every second. During the last  
10 seconds fast short beeps will be heard. If you  
don’t exit before the delay time expires and an  
exit delay door is faulted, an alarm occurs.  
Exit  
Delay  
Tone  
On  
The area is turned off.  
Off  
On  
The area is turned All On or Part On  
The area is turned All On  
The area is turned Off  
Error  
Tone  
If you press an incorrect key, your keypad will  
sound a 2 second tone.  
Off  
The keypad will sound a Hi / Lo tone to indicate  
you have entered MENU Mode and a Lo/Hi tone  
to indicate you have exited MENU mode.  
Menu  
Mode  
On  
You have mail waiting to be read  
Off  
No Mail  
The keypad sounds fast short beeps to alert you  
when a zone programmed for chime is faulted  
or unsealled.  
Chime  
Tone  
Area is ready to turn on (All On / Part  
On)  
On  
Table 4: Keypad Tones and Their Meanings  
Off  
Not ready, Zone Open  
On  
All On  
Red  
LED  
Flashing  
On  
Alarm  
Area is off.  
Green  
LED  
Flashing  
Area not ready to turn on  
Red &  
Green  
LED  
Flashing  
Installer programming mode is active.  
Table 3: Status ICONs, LED Indicator’s and Their Meanings  
Keypad Tones  
Your keypad emits several distinct tones and displays text to  
alert you to system events. Additional bells or sirens may also  
be connected to your system. Bells or sirens mounted on the  
exterior of your premises alert neighbours to emergencies and  
provide an audible guide for police and fire fighters.  
Meaning  
Type  
When a fire zone sounds an alarm, the keypad  
will sound 3 seconds on and 2 seconds off  
(repeat).  
Fire  
Alarm  
Tone  
Figure 1: CM100 Graphic Keypad  
When a burglary zone activates while your  
system is turned on, your keypad emits a  
continuous siren tone. It sounds for the time  
set by your security company.  
Burglary  
Alarm  
Tone  
When a system component is not functioning  
properly, your keypad sounds 4 fast short beeps  
followed by a 5 second pause (repeat).  
Trouble  
Tone  
Pressing any key on the keypad sounds one  
short beep, indicating that the key press is  
accepted.  
Key  
Press  
Tone  
When you enter the premises through a zone  
programmed for entry delay, the keypad sound  
a Hi/Low tone to remind you to turn off the area.  
If the area is not turned off before the entry  
delay expires, an alarm condition will sound and  
a report may be sent to your alarm company.  
Entry  
Delay  
Tone  
Bosch Security Systems 09/06 BLCC110U  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Turning The System Off  
Basic System Operation  
Turning An Area All On  
When the system is on, you must enter through a designated  
entry door to prevent an alarm. Opening a designated door (e.g.  
front door) will start entry time. During entry time, the keypad  
will emit a pulsing tone “beep” to remind you to turn the system  
off. To turn the area off, enter your PIN followed by the [OFF] key  
before the entry delay time expires.  
Use this function to turn an area All On. The Solution 64 control  
panel is factory default only for one area. As soon as you turn  
an area on, exit time will start. Exit time allows you to exit the  
premises without sounding an alarm. Your security company  
programs the length of exit delay time.  
If you enter through the wrong door or fail to turn the system off  
before the entry delay time expires, you may sound an alarm. If  
an alarm occurs, silence the alarm (by entering your PIN followed  
by the [OFF] key) and call your security company to let them  
know that it is not an emergency situation.  
1. Make sure that all zones are normal (not faulted).  
2. Enter your PIN, then press the [ON] key.  
If your PIN is valid and if all zones are normal, exit delay time  
will start. You should leave now. If your Solution control panel  
detects a faulted zone, you should return it to normal, or bypass  
the zone.  
1. Enter your PIN + [OFF] to turn the system (or area) off.  
The keypad will no longer display the ‘Lock’ or ‘Part’ icons.  
During exit delay, you may stop the area from turning on by  
entering your PIN followed by the [OFF] key.  
Silencing Alarms  
3. To turn the system (or area) off, enter your PIN, then  
press [OFF].  
When the Solution 64 control panel has registered an alarm, the  
keypad (s) and sirens will sound to alert personnel that an alarm  
occurred. The keypad will scroll all alarms on the keypad display  
for visual feedback. If you enter your PIN before the system  
dials your security company, the alarm report is cancelled (if  
programmed).  
Turning An Area Part On / Part 2 On  
Use this function to turn an area Part On or Part 2 On. The  
Solution control panel is factory default only for one area. Part  
On and Part 2 On turns on only part of the area, leaving the rest  
of the area turned off.  
1. Enter your PIN + [OFF] to silence any alarm and turn the  
system off.  
The keypad will continue to scroll all alarm events that caused  
the alarm. This is called alarm memory.  
Only the security company can program which zones are  
monitored for Part On. The master user can program which  
zones are monitored when a user turns an area Part 2 On.  
2. To clear alarm memory, turn the area on and off again  
(eg.  
Once you have turned an area Part On or Part 2 On, exit delay  
time starts to count down. You should leave all zones that are  
active before exit delay time expires. Leaving active zones after  
exit delay expires causes an alarm event. Use Part On or Part 2 On  
only when you want part of an area turned on.  
PIN + [ON] + PIN + [OFF]).  
Automatic Arming  
Your system may have been programmed to automatically arm  
itself at a certain time of the day.  
1. Make sure that all zones are normal (not faulted).  
2. Enter your PIN, then press the [PART] key.  
If for some reason you are still in the building when the auto  
arming is taking place then it is possible to extend or delay the  
auto-on time (automatic arming time) by one hour simply by  
entering your PIN during the auto-on pre-alert time. The auto-  
on pre-alert time sounds the keypad buzzer to warn you that the  
system will automatically turn All On, Part On or Part 2 On.  
If your PIN is valid and if all zones are normal, the keypad will  
prompt you to select Part On or Part 2 On.  
3. Using the arrow keys, highlight Part On or Part 2 On then  
press [OK].  
Example:  
Exit delay time will start. You should leave now. If your system  
has a faulted zone, you should return it to normal, or bypass the  
faulted zone.  
If the control panel is programmed by your installer to  
automatically turn All On at 6:00pm and the auto-on pre-alert  
time starts beeping the keypad at 5:55pm, entering your PIN  
between 5:55pm and 6:00pm will delay the auto-on time by  
one hour and the auto-on pre-alert time will again commence  
at 6:55pm. Therefore the system will automatically turn All On at  
7:00pm.  
During exit delay, you may stop the system from turning Part On  
by entering your PIN followed by the [OFF] key.  
4. When exit time has expired, the keypad will display the  
Part On icon.  
5. To turn the system off, enter your PIN, then press [OFF].  
Bosch Security Systems 09/06 BLCC110U  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Remote Arming - Quick Arm  
sounds, try a different PIN. The keypad will now prompt  
you to enter your new PIN again.  
If you forget to arm your system it may be possible for you to  
remotely arm it using a touch tone telephone if the remote arm  
option has been enabled by your installer.  
Confirm New PIN for  
DEBBIE SMITH U002  
To arm the system call the number which the panel is connected  
to and when the panel answer you will here 3 beeps in accending  
frequency if the panel is in the disarmed condition. Press [0] +  
[#] to arm. You will hear 3 beeps in decending order when the  
panel arms.  
Press OK or MENU  
4. Enter your new PIN again.  
5. Press [OK] to save and exit, or press [MENU] to exit  
without saving Your PIN has now been changed.  
All areas on the system will be armed regardless of there condition  
when using the DTMF quick arm function.  
Duress or Silent alarms  
Programming Text Using The Keypad  
A Duress or Silent Panic alarm can be easily triggered via the  
keypad if you are being forced to operate the system against  
your will.  
When programming text via the keypad, various keys on the  
keypad operate differently.  
A group of characters is assigned to each of the numeric keys on  
the keypad. Pressing the same numeric key again will toggle to  
the next character assigned to the key (eg. Press the [2] key will  
display the ‘A’ character, press the [2] key again will toggle to the  
‘B’character, press the [2] key again will toggle to theCcharacter  
etc).  
To trigger a duress, enter your normal user PIN followed by the  
last 2 digits of your user PIN followed by the ON or OFF key. See  
the following examples.  
1) If your PIN is 2580, to send a duress report when the area is off,  
Enter, [2] + [5] + [8] + [0] + [8] + [0] + [OK] or [ON].  
Once the correct character is display use the arrow keys to move  
to the next letter of the word you are entering.  
The key assignments are identical to those found on most fixed  
and mobile phones.  
2) If your PIN is 2580, to send a duress report when the area is on,  
Enter, [2] + [5] + [8] + [0] + [8] + [0] + [OFF].  
When programming text, each numeric key represents a different  
group of characters.  
System Programming  
Some of the examples shown in the following section  
assume that you are already in programming mode.  
Note To enter programming mode simply enter your PIN  
Pressing the same numeric key repeatedly will step you through  
the available characters assigned to the key. The text key layout  
is the same as most phones. Refer to the table below for detailed  
character information.  
i
and press the MENU key on the keypad.  
Access > PIN Codes >  
Refer to the table below for more information.  
MENU 1-1-0  
Change Own PIN  
Key  
1
2
3
4
5
6
7
8
9
0
OFF  
Characters Assigned To Each Numeric Key  
This menu lets you change your own PIN. It is recommended  
that you write down your old PIN and the new one before you  
begin. The new PIN must have the same number of digits as your  
old PIN unless your installer has enabled the variable length PIN  
option. Once the change is complete you should destroy the  
written copy.  
.
,
B
E
H
K
N
Q
U
X
0
?
C
F
I
L
O
R
V
Y
!
a
d
g
j
m
S
t
-
b
e
h
k
n
p
u
w
&
c
f
i
l
o
q
v
x
`
1
A
D
G
J
M
P
T
W
SPACE  
2
3
4
5
6
r
s
z
7
9
At factory default, each PIN is fixed to 4 digits in length. The  
default PIN for User 1 (Master user) is 2580. Only the security  
installer can change the PIN length.  
8
y
Z
Enter programming mode (PIN + MENU) then,  
Scroll Up through entire character list  
Scroll Down through entire character list  
Move to left one character position  
Move to right one character position  
Clear from cursor postiion to end of line  
Table 4: Text Keypad Character Set  
1. Ensure that the system (or area) is turned off.  
2. Enter your PIN, and then press [MENU] + [1] + [1] + [0].The  
keypad will prompt you to enter a new PIN.  
Enter New PIN for  
DEBBIE SMITH U002  
Once the desired character is displayed press the right [] arrow  
key to move to the next character position.To save programming  
changes, press [OK], or press [MENU] to exit without saving.  
Press OK or MENU  
The following additional special characters are available  
by scrolling using the up and down arrow keys.  
3. Enter your new PIN, and then press [OK]. If an error tone  
+ -  
@
#
$
&
%
*
:
(
)
/
< > =  
Bosch Security Systems 09/06 BLCC110U  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
to add, then press [OK].  
Access > PIN Codes >  
The keypad will prompt you to enter the new pin.  
MENU 1-1-1  
Change Other PIN  
Enter New PIN for  
User 3 Name U003  
If you have a master PIN, this command allows you to change  
somebody else’s PIN. It is recommended that you write down the  
old PIN and the new one before you begin. Once the change is  
complete you should destroy the written copy. The new PIN must  
have the same number of digits as the old PIN.  
Press OK or MENU  
3. Enter the new PIN for the user you have selected.  
If an error tone sounds, try a different new PIN.  
At factory default, each PIN is fixed to 4 digits in length. The  
default PIN for User 1 (Master user) is 2580.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Enter programming mode (PIN + MENU) then,  
Ensure that the system (or area) is turned off.  
Access > PIN Codes >  
1. Press [MENU] + [1] + [1] + [1]. The keypad will display a list  
of available users that you can change their PIN.  
MENU 1-1-3  
Delete PIN  
This menu allows a Master user the ability delete other users  
PIN’s. A Master user can only delete a PIN for those users that  
have been assigned to the same area(s) as the Master user. A  
Master user cannot delete their own PIN.  
U001 JOHN SMITH  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
Press , OK or MENU  
Enter programming mode (PIN + MENU) then,  
1. Make sure that the system is turned off.  
3. Use the [] and [] keys to select the user that you want to  
change the PIN, then press [OK] to select. Alternatively,  
you can enter the user number you want to change, then  
press [OK ].  
2. Press [MENU] + [1] + [1] + [3].  
The keypad will list all users that you can delete.  
U001 JOHN SMITH  
Please Enter PIN for  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
Press , OK or MENU  
DEBBIE SMITH  
U002,  
Then Press OK.  
4. Enter the new PIN.  
3. Use the [] and [] keys to highlight the user whose  
PIN you want to delete, then press [OK] to select.  
Alternatively, you can enter the user number you want to  
delete, then press [OK].  
If an error tone sounds, try a different PIN.  
5. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Press OK to delete PIN  
For U002 DEBBIE SMITH  
Access > PIN Codes >  
MENU 1-1-2  
Add PIN  
This menu allows a Master user to add a PIN to a new user. A  
Master user can only program a new PIN for those users that have  
been assigned to the same area(s) as the Master user.  
Press OK or MENU  
4. Press [OK] again to delete the PIN, or press [MENU] to  
cancel.  
At factory default, each PIN is fixed to 4 digits in length. The  
default PIN for User 1 (Master user) is 2580.  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [1] + [1] + [2].  
A list of users will display on the keypad.  
U001 JOHN SMITH  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
Press , OK or MENU  
2. Use the [] and [] keys to select the user that you  
want to add a PIN, then press [OK] to select.  
Alternatively, you can enter the user number you want  
Bosch Security Systems 09/06 BLCC110U  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Tokens  
1. Enter [MENU] + [1] + [2] + [1].  
A list of users will display on the keypad.  
This section outlines how to add and delete token cards that  
allow an alternate method for users to turn the system on and  
off via a prox reader enabled Keypad or an external reader. The  
system can also be configured to automaticall open a door if it  
has been fitted with an electric door lock. You should discuss  
this feature with your installer for more details on your particular  
installation.  
2. Use the [] and [] keys to select the user who’s token you  
want to delete, then press [OK] to select.  
U001 JOHN SMITH  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
Press , OK or MENU  
A token is a small plastic tag card that has a unique ID. A user can  
place the token card in front of a keypad that has a built-in token  
reader to turn the system or specific areas on and off.  
Access > Token >  
3. When prompted press the [OK] key to confirm token  
deletion.  
MENU 1-2-0  
Add Token  
This menu allows a Master user the ability to add a new token  
for for those users that have been assigned to the same area(s)  
as the Master user.  
Access > Token >  
MENU 1-2-2  
Token Status  
Enter programming mode (PIN + MENU) then,  
This menu allows a Master user the ability to identify a token  
which has been programmed into the system. Only tokens that  
have been assigned to the same area(s) as the Master user cn be  
identified.  
1. Enter [MENU] + [1] + [2] + [0].  
A list of users will display on the keypad.  
Enter programming mode (PIN + MENU) then,  
2. Use the [] and [] keys to select the user that you want to  
add a token for, then press [OK] to select.  
1. Enter [MENU] + [1] + [2] + [2].  
The system will prompt you to present the token to the  
keypad.  
U001 JOHN SMITH  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
Press , OK or MENU  
2. Once the token is presented the system will display the  
owner of the token.  
Token belongs to ur002  
DEBBIE SMITH  
3. If you are using a keypad with built in reader the system  
will prompt you to present the token to the keypad. Once  
the token is presented the keypad we beep and return to  
the menu.  
Press OK or MENU  
To Add token for U001  
JOHN SMITH swipe new  
token  
RF Keyfob  
This section outlines how to add and delete RF keyfobs that  
allow an alternate method for users to turn an area(s) on and off.  
The RF Keyfob must be compatible with the RF Receiver that has  
been installed by the security company.  
4. If you are learning the token via an external reader the  
system will prompt you to select the reader to learn from.  
Use the [] and [] keys to select the reader and then  
repeat step 3 presenting the token to the external reader.  
Access > RF Keyfob >  
MENU 1-3-0  
Add Keyfob  
This menu allows the security installer or a master user to program  
the user’s keyfob ID number.  
A Master user can only delete a PIN for those users that have  
been assigned to the same area(s) as the Master user. A Master  
user cannot delete their own PIN.  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [1] + [3] + [0].  
Access > Token >  
A list of users will display on the keypad.  
MENU 1-2-1  
Delete Token  
This menu allows a Master user the ability to delete a token for  
those users that have been assigned to the same area(s) as the  
Master user.  
U001 JOHN SMITH  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
PRESS , OK or MENU  
Enter programming mode (PIN + MENU) then,  
Bosch Security Systems 09/06 BLCC110U  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
2. Use the [] and [] keys to select the user that you  
want to add the RF keyfob ID, then press [OK] to select.  
Alternatively, you can enter the user number you, then  
press [OK].  
2. To program the user name, use the [] and [] keys to  
select the user that you want to program, then press [OK]  
to select. Alternatively, you can enter the user number  
you want to program, then press [OK].  
The keypad will prompt you to enter the RF keyfob ID  
number:  
The keypad will display the current user name.  
Enter keyfob RFid for  
U016 User 16 Name  
000000000  
User Name U001  
User 1 Name  
Press OK or MENU  
Press ◄► OK to SAVE  
3. Enter the RF Keyfob ID Number  
3. Use the [] and [] keys to scroll the cursor left and  
right across the user name text. Use the [] and [] keys  
to scroll through the different characters available. To  
clear all text from the cursor position to the right, press  
the [OFF] key.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Access > RF Keyfob >  
4. When the user name is complete, press [OK] to save and  
exit, or press [MENU] to exit without saving.  
MENU 1-3-1  
Delete Keyfob  
This menu allows the security installer or a master user to delete  
the RF keyfob ID that has been assigned to a user.  
Access > User Properties >  
Enter programming mode (PIN + MENU) then,  
MENU 1-4-1  
Area Assignment  
This menu allows the master user to program which areas (1 to 8)  
a user can access. Each user can be assigned to one or multiple  
areas. The master user is restricted and can only assign another  
user to any one or multiple areas that the master user has been  
assigned to. At factory default, each user is assigned to operate  
Area 1.  
1. Enter [MENU] + [1] + [3] + [1].  
A list of users will display on the keypad.  
U001 JOHN SMITH  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
PRESS , OK or MENU  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [1] + [4] + [1].  
A list of users will display on the keypad.  
2. Use the [] and [] keys to select the user that you want to  
delete the keyfob, then press [OK] to select. Alternatively,  
you can enter the user number, then press [OK].  
2. To assign areas to a user, use the [] and [] keys to select  
the user that you want to program, then press [OK] to  
select. Alternatively, you can enter the user number you  
want to program, then press [OK].  
OK to delete Keyfob for  
U002 Debbie Smith  
009553507  
The keypad will display which areas the user has been  
assigned to.  
Press OK or MENU  
Area 1  
Area 2  
3. Press [OK] to delete the RF Keyfob ID number and exit, or  
press [MENU] to exit without saving.  
Area 3  
Press  OK ON OFF MENU  
Access > User Properties >  
3. Use the [] and [] keys to select the area that you want to  
assign to the user. Press the [ON] key to assign the user to  
the area (√ will display) or press the [OFF] key to disable  
the user from the corresponding area (√ will no longer  
display).  
MENU 1-4-0  
User Name  
This menu allows the master user to program the user’s name. A  
maximum of 16 characters can be entered.  
Enter programming mode (PIN + MENU) then,  
4. Repeat Step 3 until you have assigned the user to all  
areas that are required.  
1. Enter [MENU] + [1] + [4] + [0].  
A list of users will display on the keypad.  
5. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
U001 JOHN SMITH  
Timer Groups  
U002 DEBBIE SMITH  
U003 USER 3 NAME  
Press  OK or MENU  
Timer Groups are used to restrict users from operating doors  
outside given times, days or holidays. To do this you need to  
create a time group, then assign one or more schedules to the  
Bosch Security Systems 09/06 BLCC110U  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
time group to specify the access period, day of the week and  
holidays. To now restrict the user, they must belong also to the  
same timer group. This now restricts the user from accessing  
the system outside the nominated times and days within the  
schedules linked to the timer group.  
Access > User Properties >  
MENU 1-4-5  
Access Assignment  
This menu allows you to assign each user to one or more access  
groups. An access group is used to allow and/or restrict which  
users have access to various system outputs. These outputs can  
be used to control door strikes, gates or roller doors etc.  
User  
Can only belong to 1 timer group.  
Enter programming mode (PIN + MENU) then,  
Schedules  
Multiple schedules can be linked to the same timer group.  
1. Enter [MENU] + [1] + [4] + [5] and select the user from the  
list then press [OK].  
Time Groups  
Ur001 John Smith  
There are 8 different timer groups available.  
Ur002 Debbie Smith  
Ur003 User 3 Name  
Press  OK or MENU  
Timer Group Example  
1. To set up a timer group you need to select an unused  
timer group number from 1 to 8, in this example we will  
assume timer group number to be 5.  
2. Use the up and down arrow keys to highlight the Access  
Group then press the [ON] key to select or the [OFF] key  
to deselect.  
2. Select an unused schedule and program the times and  
day of the week then assign the schedule to timer group  
5.  
Access Group 1  
Access Group 2  
3. Then under user properties assign the users who you  
wish to restrict to timer group 5. Remember that you are  
only able to assign a user to one timer group.  
Access Group 3  
Press  OK ON OFF MENU  
A master code holder is able to change the schedules so they  
can change the access times for a given user. If a user tries to  
operate the system outside their assigned timer group periods  
then access will be denied.  
3. Repeat Step 2 until all required Access Groups are  
programmed, then press [OK] to save and exit or press  
[MENU] to exit without saving.  
Areas  
Access > User Properties >  
The Solution 64 control panel has the ability to be partitioned  
up to 8 individual areas. This section outlines various commands  
that control individual areas.  
MENU 1-4-4  
Timer Group  
This menu is used to assign a User to a Timer Group. Timer  
Groups can be used to restrict User access to be within specific  
times defined by schedules. Each User can only be assigned to  
one Timer Group. Setting this option to 0 will give the User 24  
hour access to the system.  
Areas > Commands >  
MENU 2-0-0  
Area Status  
This menu allows users the ability view the area status of the  
current area or the status of a different area. This menu is only  
available via a keypad who’s corresponding area is turned off.  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [1] + [4] + [4] and select the user from the  
list then press [OK].  
Enter programming mode (PIN + MENU) then,  
Ur001 John Smith  
1. Enter [MENU] + [2] + [0] + [0].  
Ur002 Debbie Smith  
Ur003 User 3 Name  
Press  OK or MENU  
A list of available areas will display on the keypad.  
A001 Main Office  
A002 Production  
A003 Warehouse  
2. Using the numeric keys, enter the Timer Group. Valid  
entries are 1 – 8 or 0 to disable.  
PRESS , OK or MENU  
Timer Group Ur001  
00  
2. Use the [] and [] keys to select the area that you want  
to view the status information, then press [OK] to select.  
Alternatively, you can enter the area number, then press  
[OK].  
Press 0-9 OK to SAVE  
3. Press [OK] to save and exit or press [MENU] to exit  
without saving.  
The keypad will display the area status information.  
Bosch Security Systems 09/06 BLCC110U  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Main Office A001  
Area 1 Name  
EXIT NOW  
Disarmed  
Press OK or MENU  
If the area is turned All On, the keypad will display:  
Main Office A001  
Armed All On  
When exit time has expired, the keypad will display that  
all areas are turned All On (Armed).  
Area 1 Name  
ARMED  
Fri,Aug,13 5:34 pm  
If the area is turned Part On, the keypad will display:  
Main Office A001  
Armed Part On  
Area icons will only display if programmed to  
do so by your security installer.  
i
Note  
3. To exit, press [OK].  
Areas > Commands >  
Areas > Commands >  
MENU 2-0-3  
Turn All Areas Off  
MENU 2-0-1  
Turn Area On/Off  
This menu allows you to turn off all areas that your PIN has been  
assigned to at the same time. However, this menu requires at  
least one area that has a keypad assigned to it to be disarmed  
before you can access this command.  
This menu allows you to turn an area All On or off.  
Enter programming mode (PIN + MENU) then,  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [2] + [0] + [1].  
A list of different areas will display on the keypad.  
1. Enter [MENU] + [2] + [0] + [3].  
A001 Reception Area  
A002 Sales Dept   
Areas > Commands >  
A003 Administration Dept  
Press , OK or MENU  
MENU 2-0-4  
Move To Area  
This menu allows you to operate multiple areas from the same  
keypad when the system has been partitioned. Before operating  
a different area, you will need to move the keypad to the area  
that you want to operate.  
If an area has already been turned All On or Part On, a  
‘tick’ () will be displayed on the right side of the name  
description (see A002 Sales Dept above).  
Enter programming mode (PIN + MENU) then,  
2. Use the [] and [] keys to select the area that you want  
to turn on or off, then press [OK] to select. Alternatively,  
you can enter the area number you want to turn on or off,  
then press [OK].  
1. Enter [MENU] + [2] + [0] + [4].  
A list of different areas will display on the keypad.  
A001 Reception Area  
A002 Sales Dept  
Areas > Commands >  
A003 Administration Dept  
Press , OK or MENU  
MENU 2-0-2  
Turn All Areas On  
This menu allows you to turn on all areas that your PIN has been  
assigned to at the same time All On. The keypad display below  
shows the area icons 1 through to 8.  
2. Use the [] and [] keys to select the area that you want  
to move the keypad display to, then press [OK] to select.  
Alternatively, you can enter the area number that you  
want to move the keypad display to, then press [OK].  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [2] + [0] + [2].  
The keypad will display the exit time bar to prompt you  
to exit all areas. You should leave all areas now.  
Bosch Security Systems 09/06 BLCC110U  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Areas > Commands >  
Areas > Area Properties >  
MENU 2-0-5  
Chime On/Off  
MENU 2-1-0  
Area Name  
Chime mode allows you to monitor a zone (or group of zones)  
to sound the keypad buzzer or activate a programmable output  
when the corresponding area is turned off (disarmed). This can  
be useful when you need to monitor the front or back entrance  
to the premises.  
This menu allows you to program the name for each area. Each  
area name can be programmed with up to 16 characters. At  
factory default, only Area 1 is used. The Solution 64 control panel  
can have a maximum of 8 independent areas programmed.  
Enter programming mode (PIN + MENU) then,  
This menu allows a user to turn chime mode on or off. Only  
keypads programmed to sound the chime tone will be heard  
when a zone programmed for chime is faulted.  
1. Enter [MENU] + [2] + [1] + [0].  
A list of different areas will display on the keypad.  
The master user can Set Chime Zones on page 16. This allows  
the master user to program which zones can be monitored for  
chime.  
2. Use the [] and [] keys to select the area that you  
want to program the name, then press [OK] to select.  
Alternatively, you can enter the area number that you  
want to program the name, then press [OK].  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [2] + [0] + [5].  
The keypad will display the following:  
A list of different areas will display on the keypad.  
Area Name A001  
A001 Reception Area   
A002 Sales Dept  
Area 1 Name  
A003 Administration Dept  
Press  OK or MENU  
Press ◄► OK to SAVE  
3. Use the [] and [] keys to scroll the cursor left and  
right across the area name text. Use the [] and [] keys  
to scroll through the different characters available. To  
clear all text from the cursor position to the right, press  
the [OFF] key.  
2. Use the [] and [] keys to select the area that you want  
to turn chime mode on or off, then press [OK] to select.  
Alternatively, you can enter the area number that you  
want to turn chime mode on or off, then press [OK].  
The keypad will display the following when chime mode  
is turned off:  
4. When the user name is complete, press [OK].  
Reception Area A001  
Chime Is OFF,  
Inputs  
Your Solution 64 control panel has up to a maximum 64 zones.  
When the optional radio receiver is fitted any available zone may  
be programmed as a wireless zone. Your installer will advise you  
on the exact makeup and configuration of your system.  
To Turn ON, Press ON.  
To Go Back Press OK  
The keypad will display the following when chime mode  
is turned on:  
Inputs > Commands >  
MENU 3-0-0  
Zone Status  
Reception Area A001  
Chime Is ON,  
This menu allows you to view the zone status of each zone (i.e.  
Normal, Open or Short).  
To Turn OFF, Press OFF.  
To Go Back Press OK  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [3] + [0] + [0].  
A list of different zones will display on the keypad.  
3. Press the [ON] key to turn chime mode on, or, press [OFF]  
to turn chime mode off.  
2. Use the [] and [] keys to select the zone that you want  
to turn view the status information then press [OK] to  
select. Alternatively, you can enter the zone number that  
you want to view status information, then press [OK].  
4. Press the [OK] key to exit.  
The keypad will display the following zone status  
information:  
Zone 1 Name Z001  
EOL=Normal 06523 ohms  
Press OK or MENU  
3. Press the [OK] key to exit.  
Bosch Security Systems 09/06 BLCC110U  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Inputs > Commands >  
Inputs > Commands >  
MENU 3-0-2  
Bypass Zones  
MENU 3-0-3  
Set Chime Zones  
This menu allows you to program zones to be monitored when  
the system is turned off. Chime mode is ideal to monitor a front  
door to sound the keypad buzzer when opened (faulted).  
This menu allows you to bypass or un-bypass a single or multiple  
zones before you turn the area All On, Part On or Part 2 On.  
When bypassing zones, it disables the ability for a zone to detect  
intrusion and sound an alarm.  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [3] + [0] + [3].  
A burglary zone will automatically become un-bypassed when  
you turn the corresponding area off (disarm). Any 24-Hr fire or  
24-Hr non fire zones will need to be manually un-bypassed.  
A list of areas will display on the keypad.  
2. Use the [] and [] keys to select the area that you want  
to program zones for chime mode, then press [OK].  
Alternatively, you can enter the area number that you  
want to program chime zones, then press [OK].  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [3] + [0] + [2].  
The keypad will list all zones that can be programmed for  
chime mode. A ‘’ displayed on the right side of the zone  
name indicates that the zone is already set for chime.  
A list of zones that can be bypassed will display on the  
keypad. A ‘√’ displayed on the right side of the zone  
name indicates that the zone is already bypassed.  
Z001 Zone 1 Name   
Z002 Zone 2 Name  
Z003 Zone 3 Name  
Press  OK or MENU  
Z001 Zone 1 Name   
Z002 Zone 2 Name  
Z003 Zone 3 Name  
Press  OK or MENU  
3. Use the [] and [] keys to select the zone that you want  
to set for chime, then press [OK]. Alternatively, you can  
enter the zone number that you want to set for chime,  
then press [OK].  
2. Use the [] and [] keys to select the zone that you want  
to bypass, then press [OK]. Alternatively, you can enter  
the zone number that you want to bypass, then press  
[OK].  
If the zone is not programmed for chime, the keypad will  
prompt:  
If the zone is bypassed, the keypad will prompt:  
Zone 1 Name Z001 is  
bypassed. To un-bypass,  
press OFF.  
Zone 1 Name Z001  
Zone Chime is OFF,  
To turn ON, Press ON.  
To Go Back Press OK  
Press OK or MENU  
If the zone is not bypassed, the keypad will prompt:  
If the zone is programmed for chime, the keypad will  
prompt:  
Zone 1 Name Z001 is  
un-bypassed. To bypass,  
press ON.  
Zone 1 Name Z001  
Zone Chime is ON.  
Press OK or MENU  
To turn OFF, Press OFF.  
To Go Back Press OK  
3. Press [ON] or [OFF] to toggle the zone to be bypassed/un-  
bypassed.  
4. Press [ON] or [OFF] to toggle the zone to be monitored  
when chime mode is turned on.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
5. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Repeat steps 1 to 4 to bypass or un-bypass additional  
zones.  
Bosch Security Systems 09/06 BLCC110U  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Inputs > Commands >  
Inputs > Commands >  
MENU 3-0-4  
MENU 3-0-5  
Set Part 2 Zones  
Smoke Sensor Reset  
Thismenuallowsyoutoprogramwhichzonesaretobemonitored  
when an area has been turned Part 2 On.  
This menu allows you to reset smoke sensors.  
Enter programming mode (PIN + MENU) then,  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [3] + [0] + [5].  
1. Enter [MENU] + [3] + [0] + [4].  
A list of different areas will display on the keypad.  
A list of areas will display on the keypad.  
2. Use the [] and [] keys to select the area that you  
want to program zones for Part 2 On, then press [OK].  
Alternatively, you can enter the area number that you  
want to program Part 2 On zones, then press [OK].  
2. Use the [] and [] keys to select the area that you want  
to reset the smoke detectors, then press [OK] to select.  
Alternatively, you can enter the area number, then press  
[OK].  
The keypad will list all zones that can be programmed for  
Part 2 On. A ‘’ displayed on the right side of the zone  
name indicates that the zone is already bypassed.  
The keypad will display the following:  
Smoke detector reset in  
Progress. Please wait  
Z001 Zone 1 Name   
Z002 Zone 2 Name  
Z003 Zone 3 Name  
Press  OK or MENU  
3. The keypad will automatically return to the menu when  
all smoke detectors in the area has been reset.  
3. Use the [] and [] keys to select the zone that you want  
to set for Part 2, then press [OK]. Alternatively, you can  
enter the zone number that you want to set for Part 2,  
then press [OK].  
Inputs > Zone Properties >  
MENU 3-1-0  
Zone Name  
If the zone is not programmed for Part 2, the keypad will  
prompt:  
This menu allows you to program up to 16 characters for the  
name of each zone.  
Enter programming mode (PIN + MENU) then,  
Zone 1 Z001  
Is not a PART2 Zone,  
To Enable, Press ON.  
To Go Back Press OK  
1. Enter [MENU] + [3] + [1] + [0].  
A list of different zones will display on the keypad.  
2. Use the [] and [] keys to select the zone name that you  
want to change, then press [OK] to select. Alternatively,  
you can enter the zone number, then press [OK].  
If the zone is programmed for Part 2, the keypad will  
prompt:  
Zone 1 Z001  
The keypad will display the following:  
Is a PART2 Zone,  
To remove, Press OFF.  
To Go Back Press OK  
Zone Name Z001  
Zone 1 Name  
4. Press [ON] to monitor the zone when the area is turned  
Part 2 On, or press [OFF] so that you do not monitor the  
zone when the area is turned Part 2 On.  
Press ◄► OK to SAVE  
3. Use the [] and [] keys to scroll the cursor left and  
right across the zone name text. Use the [] and [] keys  
to scroll through the different characters available. To  
clear all text from the cursor position to the right, press  
the [OFF] key.  
5. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Bosch Security Systems 09/06 BLCC110U  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Inputs > Input Testing >  
Inputs > Input Testing >  
MENU 3-9-0  
MENU 3-9-1  
Walk Test All Zones  
Walk Test A Single Zone  
This menu allows you to test all zones within an area at the same  
time. To successfully walk test each zone, you must open and  
close each zone.  
This menu allows you to select a single zone to be tested via walk  
test.  
Enter programming mode (PIN + MENU) then,  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [3] + [9] + [1].  
1. Press [MENU] + [3] + [9] + [0].  
The keypad will display a list of zones that are available to  
be tested via walk test.  
The keypad will display a list of areas that are available to  
walk test zones.  
2. Use the [] and [] keys to select the zone that you want  
to walk test, then press [OK] to select. Alternatively, you  
can enter the zone number, then press [OK].  
2. Use the [] and [] keys to select the area that you want to  
do walk test, then press [OK] to select. Alternatively, you  
can enter the area number, then press [OK].  
The keypad will display the zone to be tested.  
The keypad will scroll all zones that you can test.  
To test Z001  
To test Z001  
open then close  
open then close  
Zone 1 Name  
Zone 1 Name  
Press OK or MENU  
Press OK or MENU  
3. Open and close the zone that needs to be tested.  
When the zone has been successfully faulted and  
restored, the keypad will display:  
To test Z002  
open then close  
Zone 2 Name  
Z001 Zone 1 Name  
Test Successful  
Press OK or MENU  
3. Open and close each zone that needs to be tested. A  
zone that has been successfully tested will no longer  
scroll on the keypad display.  
Press OK or MENU  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
When all zones have been tested, the keypad will display:  
Selected zones have been  
Tested OK  
Outputs  
The Solution 64 control panel has up to a maximum of 8 outputs.  
4 outputs are available as standard with an additional 4 available  
when the optional output expander is fitted. Your installer  
will advise you on the exact makeup and configuration of you  
system.  
Press OK or MENU  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Outputs > Commands >  
MENU 4-0-0  
Output Status  
This menu allows you to view the status of each output.  
Enter programming mode (PIN + MENU) then,  
1. Ensure that the system is turned off.  
2. Press [MENU] + [4] + [0] + [0].  
The keypad will display a list of outputs that the status  
may be viewed.  
3. Using the [] and [] keys, highlight the output that you  
want to view the status information, then press [OK] to  
select. Alternatively, you can enter the output number  
and then press [OK].  
The keypad will display the following when the output is  
off and OK:  
Bosch Security Systems 09/06 BLCC110U  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Output 1 Name O001  
Is Off and Ready  
Output 1 Name O001  
Output is OFF,  
To Turn ON,Press ON.  
To Go Back Press OK  
Press OK or MENU  
To turn the output on, press [ON].  
The keypad will display the following when the output is  
off and missing:  
The keypad will display the following when the output is  
on:  
Output 1 Name O001  
Is Off and Ready  
Connection Trouble  
Press OK or MENU  
Output 1 O001  
Output is ON,  
To Turn OFF,Press OFF.  
To Go Back Press OK  
The keypad will display the following when the output is  
ON and OK:  
To turn the output off, press [OFF].  
Output 1 Name O001  
Is ON and Ready  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Press OK or MENU  
The keypad will display the following when the output is  
ON and missing:  
Outputs > Properties >  
MENU 4-1-0  
Output Name  
This menu allows you to program the name for each output.  
Each output name supports up to 16 characters.  
Output 1 Name O001  
Is ON and Ready  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [4] + [1] + [0].  
Connection Trouble  
Press OK or MENU  
A list of different outputs will display on the keypad.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
2. Use the [] and [] keys to select the output name  
that you want to change, then press [OK] to select.  
Alternatively, you can enter the output number, then  
press [OK].  
Outputs > Commands >  
MENU 4-0-1  
Turn Output On/Off  
The keypad will display the following:  
Thismenuallowsyoutoturnoutputsthathavebeenprogrammed  
by your security company on or off. These outputs can be  
programmed to control outside lighting, pool pumps, watering  
systems etc.  
Output Name O001  
Enter programming mode (PIN + MENU) then,  
Output 1  
Press ◄► OK to SAVE  
1. Press [MENU] + [4] + [0] + [1].  
If a valid PIN is required, the keypad will prompt you to  
enter your PIN.  
3. Use the [] and [] keys to scroll the cursor left and right  
across the output name text. Use the [] and [] keys to  
scroll through the different characters available. To clear  
all text from the cursor position to the right, press the  
[OFF] key.  
2. Use the [] and [] keys to select the output name  
that you want to change, then press [OK] to select.  
Alternatively, you can enter the output number, then  
press [OK].  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
3. To toggle the output on or off, use the [ON] and [OFF]  
keys.  
The keypad will display the following when the output is  
off:  
Bosch Security Systems 09/06 BLCC110U  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Internal Audible Testing  
Press any key to abort  
Outputs > Output Testing >  
MENU 4-9-0  
External Siren Test  
This menu allows you to test any external sirens which have been  
connected by your installer. The test will last for 5 seconds.  
Press OK or MENU  
Enter programming mode (PIN + MENU) then,  
When the bell test is complete, the keypad will display  
the following:  
1. Enter [MENU] + [4] + [9] + [0].  
If the system has been partitioned, the keypad will  
display a list of areas.  
Testing Complete. Press  
OK to continue  
A001 Area 1 Name  
A002 Area 2 Name  
A003 Area 3 Name  
PRESS  OK or MENU  
Press OK or MENU  
3. Press [OK] to exit.  
Outputs > Output Testing >  
2. Use the [] and [] keys to select the area that you want  
to test the siren, then press [OK]. Alternatively, you can  
enter the area number, then press [OK].  
MENU 4-9-2  
Strobe Test  
This menu allows you to test the external strobe light.  
Enter programming mode (PIN + MENU) then,  
The keypad will display the following during the siren  
test.  
1. Enter [MENU] + [4] + [9] + [2].  
External Audible  
Testing Press any key to  
abort  
If the system has been partitioned, the keypad will  
display a list of areas.  
A001 Area 1 Name  
A002 Area 2 Name  
A003 Area 3 Name  
PRESS  OK or MENU  
Press OK or MENU  
When the siren test is complete, the keypad will display  
the following:  
2. Use the [] and [] keys to select the area that you want to  
Testing Complete. Press  
OK to continue  
test the strobe, then press [OK].  
Alternatively, you can enter the area number, then press  
[OK].  
Press OK or MENU  
The keypad will display the following during the strobe  
test.  
3. Press [OK] to exit.  
Outputs > Output Testing >  
Strobe Activated. Will  
Reset On exit  
MENU 4-9-1  
Internal Siren Test  
This menu allows you to test any internal sirens which have been  
connected by your installer. The test will last for 5 seconds.  
Press OK or MENU  
Enter programming mode (PIN + MENU) then,  
Check and verify that the strobe light is on.  
3. Press [OK] to exit.  
1. Enter [MENU] + [4] + [9] + [1].  
If the system has been partitioned, the keypad will  
display a list of areas.  
A001 Area 1 Name  
A002 Area 2 Name  
A003 Area 3 Name  
PRESS  OK or MENU  
2. Use the [] and [] keys to select the area that you want to  
test the bell, then press [OK]. Alternatively, you can enter  
the area number, then press [OK].  
The keypad will display the following during the bell test.  
Bosch Security Systems 09/06 BLCC110U  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Communication / Reporting  
Comms > Commands >  
Programming options in this section relate to how you alarm  
syetm will communicate alarm information. Your installer will  
advise you on the exact makeup and configuration of your  
system.  
MENU 5-1-5  
Set Domestic Phone Number  
Domestic reporting allows the Solution 64 control panel to send  
reports to personal telephone numbers (eg. mobile telephone  
numbers). Up to three different telephone numbers can be  
programmed, each having a maximum of 32 digits.  
Comms > Commands >  
A telephone call needs to be acknowledged by the user that  
answers the incoming call. If the user fails to acknowledge the  
call, the Solution 64 control panel will make another attempt to  
report until the maximum number of call attempts are reached.  
To acknowledge the call, the user needs to press the [#] key on  
their telephone.  
MENU 5-0-1  
Call/Answer RAS  
This menu allows you to initiate a modem call to the installer’s  
off-site computer for programming changes or updates. Your  
installer may request that you enter this command so that they  
can remotely service and configure you system. You should not  
enter this command unless requested to do so.  
Enter programming mode (PIN + MENU) then,  
Comms > Commands >  
1. Enter [MENU] + [5] + [1] + [5].  
MENU 5-0-2  
Call Forward On/Off  
If the control panel is configured to report via domestic  
format, the keypad will display the following:  
This menu allows you to turn on and off the call forward feature.  
When you turn on call forwarding, the Solution 64 control panel  
will automatically activate and de-activate the call forward on  
and call forward off sequence accordingly when you turn Area 1  
All On and off (arm and disarm).  
Domestic Reports Not  
Enabled. Please contact  
Your Security Service  
Provider  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [5] + [0] + [2].  
If the control panel has been configured to report via  
domestic format, the keypad will display information for  
telephone number 1.  
If the call forward status is off, the keypad will display:  
Call Forward On/Off  
Call Forward is OFF,  
To turn ON, Press ON.  
To Go Back Press OK  
Domestic Phone Number 1  
631728_  
Press  0-9 OK to SAVE  
If the call forward status is on, the keypad will display:  
2. Using the numeric keys, enter all the digits of the first  
telephone number.  
Call Forward On/Off  
Call Forward is ON,  
To turn OFF, Press OFF.  
To Go Back Press OK  
You can change a single digit by scrolling the cursor left  
[] and right []. For special characters (eg. , = pause *  
or # etc), use the [] and [] keys. To clear all text from the  
cursor position to the right, press the [OFF] key.  
2. To toggle call forward on, press the [ON] key or press the  
[OFF] key to turn call forward off.  
3. Press [OK] to program telephone number 2.  
Domestic Phone Number 2  
3. Press [OK] to save and exit, or press [MENU] to cancel.  
4331_  
Comms > Commands >  
Press  0-9 OK to SAVE  
MENU 5-0-3  
Check Web Email  
4. Using the numeric keys, enter all the digits of the second  
telephone number (if required).  
Reserved for future use  
You can change a single digit by scrolling the cursor left  
[] and right []. For special characters (eg. , = pause *  
or # etc), use the [] and [] keys. To clear all text from the  
cursor position to the right, press the [OFF] key.  
Comms > Commands >  
MENU 5-0-4  
Email System Log  
Reserved for future use  
5. Press [OK] to program telephone number 3.  
Bosch Security Systems 09/06 BLCC110U  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Domestic Phone Number 3  
Comms > Commands >  
MENU 5-1-7  
Call Forward Off Number  
6789_  
When you enter your premises, you no longer need to remember  
to manually disable the Call Forward feature via the telephone.  
These addresses allow you to program the Call Forward Off  
sequence that the Solution 64 control panel will automatically  
use when you turn Area 1 ‘Off.  
Press  0-9 OK to SAVE  
6. Using the numeric keys, enter all the digits of the third  
telephone number (if required).  
In Australia, a typical sequence of activating the Call Forward Off  
feature is described below:  
You can change a single digit by scrolling the cursor left  
[] and right []. For special characters (eg. , = pause *  
or # etc), use the [] and [] keys. To clear all text from the  
cursor position to the right, press the [OFF] key.  
For other countries please substitute the appropriate commands  
after consultaion with your telephone company.  
Enter programming mode (PIN + MENU) then,  
7. Press [OK] to save and exit, or press [MENU] to cancel.  
1. #61 (To turn Auto-Forward After Time - Off).  
2. # (End of Call-Forward sequence).  
Comms > Commands >  
MENU 5-1-6  
Call Forward On Number  
When you leave your premises, you no longer need to remember  
tomanuallyactivatetheCallForwardOnfeatureviathetelephone.  
These addresses allow you to program the Call Forward On  
sequence that the Solution 64 control panel will automatically  
use when you turn Area 1 ‘On.  
Therefore, you would program the above steps as follows:  
#61#  
1. Enter [MENU] + [5] + [1] + [7].  
In Australia, a typical sequence of activating the Call-Forward On  
– After Time (All Calls) is described below:  
The keypad will display the current call-forward off  
sequence.  
For other countries please substitute the appropriate commands  
after consultaion with your telephone company.  
Call Forward Off N001  
Enter programming mode (PIN + MENU) then,  
_
Press  0-9 OK to SAVE  
1. *61 (To turn Call Forward On – After Time).  
2. Telephone number that you want calls to go to (e.g.  
0416123456).  
2. Using the numeric keys, enter all the digits of the call  
forward off sequence.  
3. *5# (End of Call Forward sequence after 5 seconds).  
You can change a single digit by scrolling the cursor left  
[] and right []. For special characters (eg. , = pause, *  
or # etc), use the [] and [] keys.  
Therefore, you would program the above steps as follows:  
*610416123456*5#.  
1. Enter [MENU] + [5] + [1] + [6].  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
The keypad will display information for telephone  
number 1.  
Comms > Registration >  
Call Forward On N001  
MENU 5-5-0  
Customer  
Reserved for future use  
Press  0-9 OK to SAVE  
2. Using the numeric keys, enter all the digits of the call  
forward on sequence.  
You can change a single digit by scrolling the cursor left  
[] and right []. For special characters (eg. , = pause *  
or # etc), use the [] and [] keys.  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Bosch Security Systems 09/06 BLCC110U  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
3. The display will show each parameter for the device one  
at a time on the third line of the screen.  
Comms > Periodic Test >  
MENU 5-9-0  
Send Test Report  
Keypad 001 Kp001  
Graphic + Prox V1.01  
Volts = 13.87  
This menu allows you to test the reporting functions of the  
Solution 64 control panel by manually sending a ‘Test’ report to  
the receiving party (i.e. security company monitoring station,  
mobile telephone etc).  
Press OK or MENU  
1. Enter [MENU] + [5] + [9] + [0].  
4. Press [OK] or [MENU] to exit.  
The keypad will prompt that it is in the process of sending  
a test report.  
Devices > Keypads >  
Comms testing in  
MENU 6-1-0  
Volume  
progress. Please wait..  
This menu allows you to adjust the volume of the keypad’s buzzer.  
Each keypad will need to have their volume adjusted separately.  
To Go Back Press OK  
Enter programming mode (PIN + MENU) then,  
If the test is successful, the keypad will prompt:  
1. Press [MENU] + [6] + [1] + [0].  
The keypad will display:  
Communications Test  
Successful  
Keypad 001 Volume  
L
H
Press  
to SAVE  
OK  
If the test is NOT successful, the keypad will prompt:  
Test Report Failed  
Please call for service  
2. Use the [] and [] keys or use the [] and [] keys to  
increase or decrease the volume of the keypad buzzer  
until the desired volume has been reached.  
Press OK or MENU  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
2. Press [OK] or [MENU] to exit.  
Devices > Keypads >  
Devices and Optional Modules  
MENU 6-1-1  
Contrast  
Programming options in this section relate to the keypads and  
other devices which may be connected to your alarm system.Your  
installer will advise you on the exact makeup and configuration  
of your system.  
This menu allows you to adjust the contrast of the keypad’s LCD  
display. Each keypad can have their display adjusted separately.  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [6] + [1] + [1].  
The keypad will display the contrast screen.  
Keypad 001 Contrast  
Devices > Commands >  
MENU 6-0-0  
LAN Status  
This option provides a listing of all of the devices and modules  
connected to your system. Using this option it is poosible to view  
the voltage, temperature and other information about each of  
the modules.  
L
H
Press  
to SAVE  
OK  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [6] + [0] + [0].  
2. Use the [] and [] keys to adjust the bar until the  
Kp001 Keypad 001  
Kp002 Keypad 002  
Ox001 OutputX 001  
Press  OK or MENU  
desired contrast is reached.  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
2. Use the [] and [] keys to select the device that you want  
to view, then press [OK] to select.  
Bosch Security Systems 09/06 BLCC110U  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Devices > Keypads >  
To determine the non system (zone) trouble condition,  
highlight the zone number Z001 to Z064) that you want  
to view using the [] and [] keys, then press [OK] to  
select.  
MENU 6-1-2  
Backlight  
This menu allows you to adjust the brightness of the keypad’s  
LCD display backlight. Each keypad can have their display  
adjusted separately.  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [6] + [1] + [2].  
P001 System Trouble  
Z001 Zone 1 Name  
Z002 Zone 2 Name  
The keypad will display the backlight screen.  
Press  OK or MENU  
Keypad 001 Backlight  
L
H
2. If viewing system trouble conditions, the keypad will  
display similar to the following:  
Press  
to SAVE  
OK  
Panel 001 P001  
Voltage= 13.9V Temp=36  
Date And Time  
2. Use the [] and [] keys to adjust the bar until the  
Press OK or MENU  
desired backlight is reached.  
The third line of the keypad display scrolls between all  
current system trouble events.  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
If viewing non-system trouble conditions, the keypad will  
display similar to the following:  
System Events  
Options in this section relate to programming of system wide  
options and interpretation of system trouble events when and  
if they occur. Some events such as open zones will appear and  
single events while other may be grouped together. In this case  
you need to drill down to see the specific detail for each event.  
Your installer will advise you how to interrogate system trouble  
events.  
Zone 1 Name Z001  
EOL = Open  
Press OK or MENU  
System > Commands >  
3. Press [OK] or [MENU] to exit the system trouble menu  
command:  
MENU 7-0-0  
Panel Status  
The panel staus menu displays the panel software version  
information as well as highlighting any system troubles that  
are currently in effect. This is a view only location.  
If there are no system troubles, the keypad will display:  
There are no  
System troubles.  
System > Commands >  
Press  OK or MENU  
MENU 7-0-1  
System Trouble  
Refer to the Trouble Messages table for a complete list of  
trouble events and their meanings.  
The System Trouble Menu displays all current system troubles  
in a list format. Some trouble events require you to drill down  
and non-system trouble that are curent within the Solution 64  
control panel.  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [7] + [0] + [1].  
The keypad will display a list of all current system and  
non system trouble conditions.  
To determine the system trouble condition, highlight the  
panel number (P001 to P002) that you want to view using  
the [] and [] keys, then press [OK] to select.  
P001 System Trouble  
Z001 Zone 1 Name  
Z002 Zone 2 Name  
Press  OK or MENU  
Bosch Security Systems 09/06 BLCC110U  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Trouble Condition  
Description  
The system has detected that the AC mains supply has failed or is disconnected. If there is not a general power outage  
in your area then you should contact your security company.  
Mains Missing  
The backup battery has failed the periodic test which the system performs on a regular basis. You should contact your  
security company as the battery may need replacing.  
Battery Low  
Battery Missing  
Battery Reversed  
The system has detected that its backup battery has been disconnected.  
The system has detected that backup battery has not been connected correctly.  
You should contact your security company.  
Voltage Low  
Voltage High  
The voltage reading the keypad has fallen below the minimum programmed by the security company.  
The voltage reading at the keypad has increased above the maximum programmed by the security company.  
The system has detected that the RF receiver is disconnected.  
RF Rxer Missing  
RF Rxer Tamper  
The system has detected that the tamper circuit on the RF receiver is faulted.  
The system has registered a jamming fault from the RF receiver. This situation may preven certain parts of your system  
from working correctly. You should contact your security company.  
RF Rxer Jammed  
Comms Trouble R1  
Comms Trouble R2  
The system has failed to send reports to the primary report contact. You should contact your security company.  
The system has failed to send reports to the secondary report contact.  
You should contact your security company.  
The system has failed to send its periodic report to the monitoring station.  
You should contact your security company.  
Comms Test Fail  
Buss Trouble  
The system has failed to communicate to a system device (e.g. keypad etc).  
The system has detected that either the Installer PIN or User 1 PIN has not been changed from the factory default codes.  
These codes should be changed immediately to prevent a security risk.  
Default PIN Trbl  
Date And Time  
Cabinet Tamper  
The system date and time needs to be set.  
The system has detected that someone has tampered with its metal enclosure or that it has been forced open. Inspect  
and contact your security company if necessary.  
Siren Trouble  
The system has detected that the external siren has failed or has been disconnected from the system.  
The system has detected that its telephone line has been disconnected for a minimum of 30 seconds.  
Telco Line Trouble  
The system has detected that the current load has exceeded the maximum LAN rating.  
You should contact your security company.  
LAN Overload  
Comm+ Overload  
Accessory Overld  
The system has detected that the current load has exceeded it’s maximum COMM+ rating.  
You should contact your security company.  
The system has detected that the current load has exceeded it’s maximum ACCS+ rating.  
You should contact your security company.  
Time For Service  
Memory Fault  
Default Memory  
Service Mode  
Phone In Use  
The system displays this trouble condition to remind you that a service call is due.  
The system has detected an error with its internal memory. You should contact your security company.  
The system memory has reset to factory default. You should contact your security company.  
The security installer has entered service mode.  
The system is using the phone line.  
Table 5: Control PanleTrouble Messages  
Bosch Security Systems 09/06 BLCC110U  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
System > Commands >  
System > Schedules >  
MENU 7-5-0  
MENU 7-0-2  
Name  
History Log  
This menu allows you to program 16 characters of text for each  
schedule name.  
This menu allows you to review the last 256 history events (from  
most recent to least recent).  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [7] + [5] + [0].  
Each event will display:  
A list of schedules will display on the keypad.  
Line 1 - Displays Event Number  
- Date / Time  
Sk001 Schedule 1 Name  
Sk002 Schedule 2 Name  
Sk003 Schedule 3 Name  
Press  OK or MENU  
- Destination 1 and/or 2 report status (S= Sent, P =  
Pending, F = Fail, A = Abort and L = Log Only).  
Line 2 - Displays the source of the event (eg. zone name and  
zone number or user name and user number)  
2. Use the [] and [] keys to select the schedule name  
that you want to change, then press [OK] to select.  
Alternatively, you can enter the schedule number, then  
press [OK].  
Line 3 - Displays the event description.  
Enter programming mode (PIN + MENU) then,  
The keypad will display the following:  
1. Press [MENU] + [7] + [0] + [2].  
Name S001  
The keypad will display the most recent event stored in  
the history log.  
Schedule 1 Name  
E001 Mon,01Oct 03:41 S1L2  
Manual Test Report  
PRESS ◄► OK to SAVE  
3. To program the schedule name, use the [] and []  
keys to scroll the cursor left and right across the user  
name text. Use the [] and [] keys to scroll through the  
different characters available. To clear all text from the  
cursor position to the right, press the [OFF] key.  
Press  OK or MENU  
2. Use the [] and [] keys scroll between history events.  
3. Press [OK] or [MENU] to exit.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
System > Clock >  
System > Schedules >  
MENU 7-1-0  
Set Date & Time  
MENU 7-5-1  
Time  
This menu allows you to program/adjust the date and time in the  
Solution 64 control panel.  
This menu allows you to program both the start time and stop  
time of each schedule.  
Enter programming mode (PIN + MENU) then,  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [7] + [6] + [2].  
1. Press [MENU] + [7] + [1] + [0].  
A list of schedules will display on the keypad.  
The keypad will display the current date and time.  
Sk001 Schedule 1 Name  
Sk002 Schedule 2 Name  
Sk003 Schedule 3 Name  
Press  OK or MENU  
Set Date And Time  
01-Jan-2004 04:37am  
Press ◄► OK to SAVE  
2. Use the [] and [] keys to select the schedule that you  
want to change, then press [OK] to select. Alternatively,  
you can enter the schedule number, then press [OK].  
2. Use the [] and [] keys to program the month, day, year,  
hour and minute. Use [] and [] keys to scroll cursor  
left and right to between the month, day, year, hour and  
minute.  
The keypad will display the following:  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
Sk001 Schedule 1 Name  
Start Time: 00:00  
Stop Time: 00:00  
Press 0-9 OK to SAVE  
Bosch Security Systems 09/06 BLCC110U  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
3. Enter the new start and stop times in 24-hour format  
(00:00 to 23:59 hours).  
Use the [] and [] keys to scroll through the different  
characters available. To clear all text from the cursor  
position to the right, press the [OFF] key.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
System > Schedules >  
MENU 7-5-2  
Day  
System > Holidays >  
MENU 7-6-1  
Start / Stop Day  
This menu programs which days of the week the timer execute  
function will operate. To toggle the day of the week on/off, press  
the corresponding number on the keypad (e.g. to turn Monday  
on, press [2] + [OK], to toggle Monday off, press [2] + [OK] ).  
This menu allows you to program the start date and the stop  
date of each holiday period.  
Enter programming mode (PIN + MENU) then,  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [7] + [5] + [2].  
1. Enter [MENU] + [7] + [6] + [1].  
A list of holiday names will display on the keypad.  
A list of schedules will display on the keypad.  
2. Use the [] and [] keys to select the holiday that you  
want to change, then press [OK] to select. Alternatively,  
you can enter the holiday number, then press [OK].  
Sk001 Schedule 1 Name  
Sk002 Schedule 2 Name  
Sk003 Schedule 3 Name  
Press  OK or MENU  
The keypad will display the holiday start date:  
Holiday Dates H001  
Start Date  
01 Jan  
Stop Date  
01 Jan  
2. Use the [] and [] keys to select the schedule that you  
want to change, then press [OK] to select. Alternatively,  
you can enter the schedule number, then press [OK].  
Press ◄► OK to SAVE  
The keypad will display the following:  
3. To program the holiday start date and stop date, use the  
[] and [] keys to scroll the cursor left and right between  
the holiday day and month. Use the [] and [] keys to  
scroll the day and month.  
Day Sk001  
S M T W T F S Hol  
Y Y Y Y Y Y Y N  
Press 1-8 OK to SAVE  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
3. Press [1] to [8] to enable/disable the days of the week that  
the schedule will operate.  
System > System Options >  
MENU 7-7-3  
Keypad Hi/Lo Temp  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
The keypad Hi/Lo temperature allows you to program the  
minimum (0 °C) and maximum (50 °C) temperatures the keypad  
will monitor (tolerance = +/- 2 °C).  
System > Holidays >  
If the temperature falls below the minimum temperature, the  
keypad will display ‘Low Temp ˚xx. If the temperature increases  
above the maximum temperature, the keypad will display ‘High  
temp ˚xx.  
MENU 7-6-0  
Name  
This menu allows you to program 16 characters for the holiday  
name.  
(xx = programmed temperature to be monitored).  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [7] + [7] + [3].  
Enter programming mode (PIN + MENU) then,  
1. Enter [MENU] + [7] + [0] + [6].  
A list of holiday names will display on the keypad.  
The keypad will display the current temperature settings.  
2. Use the [] and [] keys to select the timer name that you  
want to change, then press [OK] to select. Alternatively,  
you can enter the timer number, then press [OK].  
Keypad Hi/Lo Temp  
High Temp Low Temp  
The keypad will display the following:  
00  
00  
Press ◄► OK to SAVE  
Name H001  
2. Use the [] and [] keys to program the ‘High’ and ‘Low’  
temperatures. To toggle between the ‘High’ and ‘Low’  
temperature, use the [] and [] keys (Range = 0°C to  
50°C).  
Holiday 1 Name  
PRESS ◄► OK to SAVE  
3. To program the holiday name, use the [] and [] keys to  
3. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
scroll the cursor left and right across the user name text.  
Bosch Security Systems 09/06 BLCC110U  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
System > System Testing >  
If the battery has passed the test, the keypad will display:  
MENU 7-9-0  
Walk Test All Zones  
This menu allows you to test all zones within an area at the same  
time.  
Battery test Passed.  
Press OK to continue  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [7] + [9] + [0].  
The keypad will display a list of areas that are available to  
walk test zones.  
If the battery has failed the test, the keypad will display:  
2. Use the [] and [] keys to select the area that you want to  
do walk test, then press [OK] to select. Alternatively, you  
can enter the area number, then press [OK].  
Battery test Failed.  
Please Call for Service.  
Press OK to continue  
The keypad will scroll all zones that you can test.  
To test Z001  
2. Press [OK] to exit.  
open then close  
Zone 1 Name  
Press OK or MENU  
To test Z002  
open then close  
Zone 1 Name  
Press OK or MENU  
3. Open and close each zone that needs to be tested. A  
zone that has been successfully tested will no longer  
scroll on the keypad display.  
When all zones have been tested, the keypad will display:  
Selected zones have been  
Tested OK  
Press OK or MENU  
4. Press [OK] to save and exit, or press [MENU] to exit  
without saving.  
System > System Testing >  
MENU 7-9-1  
Battery Test  
This menu allows you to manually test the systems back up  
battery. The Solution 64 will automatically test the battery once  
per day and every time the system is armed.  
The battery test can take up to two minutes to complete and the  
keypad will display the voltage of the battery during the test.  
Enter programming mode (PIN + MENU) then,  
1. Press [MENU] + [7] + [9] + [2].  
The keypad will display the battery voltage whilst under  
test:  
Battery test in progress.  
Please wait..  
Voltage = 13.4V  
To Go Back Press OK  
Bosch Security Systems 09/06 BLCC110U  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Installation Details  
INSTALLED BY:  
DATE  
FAX:  
PHONE:  
EMAIL:  
SERVICE  
PHONE:  
EMAIL:  
FAX:  
MONITORED BY:  
PHONE:  
FAX:  
EMAIL:  
WARRANTY EXPIRES:  
NOTES:  
Bosch Security Systems 09/06 BLCC110U  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Index  
I
Inputs  
A
Chime Zones...................................................................... 16  
Part 2 Zones ....................................................................... 17  
Zone Bypass ....................................................................... 16  
Zone Status......................................................................... 15  
Access Assignment ................................................................ 13  
All On ................................................................................. 5, 8  
Areas  
Area Status.......................................................................... 13  
Diasrming an Area .......................................................... 8, 15  
Move To Area ..................................................................... 14  
Turn All Areas Off............................................................... 14  
Turn All Areas On ............................................................... 14  
Turn an Area On/Off........................................................... 14  
Turn Chime On/Off ............................................................ 15  
Area Assignment  
K
Keypad  
Display.......................................................................... 23, 24  
Hi/Lo Temperature............................................................. 27  
Icon Descriptions.................................................................. 6  
Keys ..................................................................................... 6  
LED Descriptions ................................................................. 6  
Status .................................................................................. 23  
Tones .................................................................................... 7  
Volume................................................................................ 23  
User ................................................................................... 12  
Arming..................................................................................... 8  
Automatic Arming ................................................................... 8  
B
M
Battery  
Medical Alarm ......................................................................... 6  
Move To Area........................................................................ 14  
Perform a Battery Test........................................................ 28  
Bypassed Zones....................................................................... 5  
Bypassing Zones.................................................................... 16  
N
Name  
C
Area ................................................................................... 15  
Output................................................................................ 19  
Call Forwarding  
Enable/Disable .................................................................... 21  
Call Forwarding Setup  
Off Sequence...................................................................... 22  
On Sequence ...................................................................... 22  
Chime Mode  
Set Chime Zones................................................................ 16  
Turn Chime On/Off ............................................................ 15  
Clock  
O
Output  
External Siren Test.............................................................. 20  
Name.................................................................................. 19  
Status .................................................................................. 18  
Strobe Test.......................................................................... 20  
Turn On/Off........................................................................ 19  
Setting the Date/Time ........................................................ 26  
Communication Options  
P
Call/Answer RAS ................................................................ 21  
Call Forward Enable/Disable .............................................. 21  
Call Forward Off ................................................................ 22  
Call Forward On................................................................. 22  
Check Web Email ............................................................... 21  
Customer Registration........................................................ 22  
Email System Log................................................................ 21  
Domestic Numbers........................................................... 21  
Test Report Send ............................................................... 23  
Panic Alarm.............................................................................. 6  
Part Mode 2  
Set Zones............................................................................ 17  
Part On Arming ................................................................... 5, 8  
PIN  
Add User PIN ..................................................................... 10  
Change Own PIN ................................................................. 9  
User Area Assignment........................................................ 12  
D
R
Date/Time ............................................................................. 26  
Delete PIN ............................................................................ 10  
Disarming ................................................................................ 8  
Domestic Reporting .............................................................. 21  
Duress Alarms......................................................................... 9  
Registration  
Customer............................................................................ 22  
DTMF Quick Arm ................................................................... 9  
Remote Arming ....................................................................... 9  
RF Keyfob  
Add ................................................................................... 11  
Delete................................................................................. 12  
F
Features................................................................................... 5  
Fire Alarm................................................................................ 6  
S
Schedules  
H
Name.................................................................................. 26  
Time ................................................................................... 26  
Security System Basics  
Are All Zones The Same? .................................................... 5  
What Is A Faulted Zone ....................................................... 5  
What Is A Zone..................................................................... 5  
Holidays  
Naming Holidays ................................................................ 27  
Set Start/Stop Times........................................................... 27  
Bosch Security Systems 09/06 BLCC110U  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Solution 64 User Guide  
Service Required.................................................................... 25  
Silencing Alarms....................................................................... 8  
Silent Alarms............................................................................ 9  
Smoke Detectors  
Sensor Reset....................................................................... 17  
Status  
Area ................................................................................... 13  
Keypad................................................................................ 23  
System  
Date/Time .......................................................................... 26  
History Log......................................................................... 26  
Holidays.............................................................................. 27  
Schedules............................................................................ 26  
Trouble................................................................................ 24  
System Log  
Email................................................................................... 21  
T
Telephone Numbers  
Call Forward Off ................................................................ 22  
Call Forward On................................................................. 22  
Domestic ............................................................................ 21  
Testing  
Battery Test......................................................................... 28  
Walk Test All Zones ............................................................ 28  
Test Report  
Send a test report............................................................... 23  
Timer Groups........................................................................ 12  
Token ................................................................................... 11  
Trouble .................................................................................. 24  
Turn Area Off .......................................................................... 8  
U
User  
Area Assignment................................................................. 12  
Name.................................................................................. 12  
User PIN............................................................................... 8  
W
Walk Test  
All Zones....................................................................... 18, 28  
Web Email ............................................................................. 21  
Z
Zone  
24-Hour Zones..................................................................... 5  
Bypass Command............................................................... 16  
Chime................................................................................. 16  
Non 24-Hour Zones............................................................. 5  
Part 2 Zones ....................................................................... 17  
Bosch Security Systems 09/06 BLCC110U  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bosch Security Systems  
25 Huntingwood Drive  
Huntingwood, NSW 2128  
Australia  
Phone: +612 9672 1777  
Facsimile: +612 9672 1717  
© 2006 Bosch Security Systems  
BLCC110U  
920304  
Issue FTR1.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Blue Rhino Outdoor Fireplace WAF741SP User Manual
Braun Electric Shaver 3612 User Manual
Braun Electric Shaver 5443 User Manual
Breville Mixer ABN77000085549 User Manual
Brother All in One Printer DCP 8045D User Manual
Brother All in One Printer mfc j650dw User Manual
Campbell Hausfeld Nail Gun NB0030 User Manual
Canon Camcorder Accessories 5175B002 User Manual
Canon Webcam CR 2 User Manual
Carrier Heating System 48MA User Manual