Owner’s Manual
Food Processor Plus
models:
MCM 5000 UC • MCM 5100 UC
MCM 5200 UC
READ THIS MANUAL
thoroughly for important safety and operating
instructions before using this appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS .................................................................. 2
Table of contents..................................................................................... 3
ABOUT YOUR FOOD PROCESSOR ...................................................... 4
Bosch Food Processor ........................................................................... 4
Unpacking............................................................................................... 4
Electrical specifications ............................................................................ 4
Before using for the first time .................................................................. 4
Getting to know your Food Processor ...................................................... 6
Power unit features .............................................................................. 6-7
Special features of mixing bowl ............................................................... 7
Getting started ................................................................................... 8-10
STANDARDATTACHMENTS ................................................................ 10
Mixing bowl w/multifunction blade, whisk, hooks and discs................... 10
How to use multifunction blade .............................................. 10-11
Placing into operation with multifunction blade .............................. 11
How to use dough hook ................................................................ 12
How to use whipping whisk.................................................... 12-13
How to use slicing and grating discs ........................................... 14
Care and cleaning of bowl and its accessories ........................... 16
Blender with unbreakable plastic jar ........................................................ 16
How to use blender...................................................................... 17
Placing blender into operation...................................................... 18
Example of use of blender ........................................................... 18
Care and cleaning of blender........................................................ 19
Citrus Juicer........................................................................................... 19
Placing into operation with citrus juicer........................................ 20
Care and cleaning of mixing bowl with citrus juicer ...................... 20
Juice Extractor....................................................................................... 20
Placing into operation with juice extractor .................................... 21
Care and cleaning of mixing bowl with juice extractor .................. 21
SERVICE and REPAIR .......................................................................... 22
TROUBLESHOOTING ................................................................. 23
SAMPLE RECIPES .......................................................................... 24-25
Important Notes ..................................................................................... 26
BOSCH small appliance warranty ........................................................... 27
HOUSEHOLD USE ONLY
Download from Www.Somanuals.com. All Manuals Search And Download.
3
three-quart capacity mixing bowl, cover
with integral feeding tube and pusher/
measuring cup, multifunction blade,
whipping whisk, dough hook, reversible
slicing disc, reversible coarse grating
disc, fine grating disc, 6-cup capacity
blender, citrus juicer, juice extractor
motor drive cover and spatula.
ABOUT YOUR FOOD PROCESSOR
Congratulations on having selected one of
the Bosch Food Processors. A series of
food processors designed to simplify
common food preparation tasks of the home
cook: stirring, beating, slicing, mincing,
grating and chopping as well as juicing.
As you read through these instructions,
please pay particular attention to the
IMPORTANT SAFEGUARDS. Specific
safeguards for the attachments, as well as
warnings and cautions, are provided in each
Unpacking
Carefully remove the power unit from its
packaging and place it on the counter so it
is ready to use. As you remove the
accessories from the carton, check them
against figure 1 to assure that all the
standard parts are present.
section describing the operation of that
particular attachment.
Bosch Food Processor
The Bosch Food Processor Plus is available
in 3 models:
Electrical Specifications
Check to make sure that the voltage on
which your food processor is to operate is
the same as specified on the rating plate.
Standard North American models have an
electrical power rating of 530-watt maximum
power rating with the attachment that draws
the most power (some attachments may
draw less power).
• The MCM 5000 UC
comprised of a two-speed electronic
power unit with integral cord storage,
three-quart capacity mixing bowl, cover
with integral feeding tube and pusher/
measuring cup, multifunction blade,
beater, dough hook, reversible slicing
disc, reversible coarse grating disc,
citrus juicer, motor drive cover and
spatula.
Before Using for the First Time
Before using any of the attachments for the
first time it is recommended they be washed,
rinsed well and dried. Of the attachments
supplied with the systems in this manual,
all parts, except the blender’s jar/blade
assembly, are dishwasher safe:
• The MCM 5100 UC
comprised of two-speed electronic power
unit with integral cord storage, three-
quart capacity mixing bowl, cover with
integral feeding tube and pusher/
measuring cup, multifunction blade,
beater, dough hook, reversible slicing
disc, reversible coarse grating disc, 6-
cup capacity blender, citrus juicer, motor
drive cover and spatula.
> The blender’s jar/blade assembly
should be washed under running water
and dried.
Note: It is recommended that the
blender jar/blade assembly
never be left to stand in water or
soap solution, to prevent the bearing
lubricant from being washed out.
• The MCM 5200 UC
comprised of a four-speed electronic
power unit with automatic cord rewind,
Download from Www.Somanuals.com. All Manuals Search And Download.
4
MCM 5000 UC
MCM 5100 UC
MCM 5200 UC
Figure 1
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Power Unit Features
Getting to Know Your Food Processor
The MCM 5000 power units have the
following features, refer to figure 2:
The Bosch Food Processors are comprised
of various attachments, depending on the
system purchased (see above).
530-watt motor
One of the most powerful motors offered
with any food processor system.
Bosch engineers are continually working on
expanding the usefulness of your Bosch
Food Processor. If there is some type of
accessory in which you are interested, that
is not presently available for your Bosch
Food Processor, please either write us at:
Electronic speed control
Six-position rotary switch, on the MCM
5200, see figure 2a; four-position rotary
switch, on the MCM 5100 and MCM 5000,
figure 2b, is located at the front of the power
unit. The MCM 5200 has 4 speeds plus a
momentary pulse function and a stop
position “O/Off,” while the MCM 5200 and
MCM 5000 have 2 speeds plus a momentary
pulse function and a stop position “O/Off,”
see figure 2a.
•
Bosch Small Appliances
Customer Support
BSH Home Appliances
5551 McFadden Avenue
Huntington Beach, CA 92649
or call us at:
1 (866) 44BOSCH
[1 (866) 442-6724]
•
Figure 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Built-in Safety Cutout
• A dual drive, figure 2f, used by bowl
accessories: one high-torque drive used
to drive dough hook, citrus juicer and
other special accessories requiring high
torque; and, a high speed drive used to
drive the multifunction blade, beater,
whipping whisk and other accessories
requiring higher speeds.
The Bosch Food Processors are provided
with a built-in safety cutout to protect the
motor against overheating.
If the safety cutout should open:
a. Turn the processor to the off position
“O/Off” and unplug.
b. Contact Bosch Small Appliances
Customer Support, see page 6, for
closest Bosch authorized service
center.
c. Take, or ship, the food processor to
a Bosch authorized service center to
have the safety cutout replaced.
Convenient cord storage
The MCM 5200 UC model stores the cord
internally, on an automatic cord winder, see
figure 2g.
Four rubber feet
Four rubber feet provide the ultimate in
stability, while also serving to isolate the
power unit from the hard surface to minimize
noise and vibration, figure 2h.
Safety Cover Interlock
The Bosch Food Processor incorporate in
their design a special safety feature; the
Safety Cover Interlock, figure 2c. This
feature prevents the rotary switch from
being turned from the Off position, “O/Off,”
if cover has not been placed on the bowl
properly and rotated to trip the Safety Cover
Interlock.
Special features of mixing bowl
The mixing bowl has a number of special
features:
Dual feeding tube
The three-quart capacity mixing bowl comes
with two feeding tubes molded into the cover.
The small tube may be used for slicing or
grating items that you wish to stand on end.
Safety Motor Drive Cover
Another special safety feature incorporated
in the Bosch Food Processors is the Safety
Motor Drive Cover, figure 2d. The Safety
Motor Drive Cover must be in place on the
high speed blender drive when not in use
or the motor will not start when turned to
one of its On positions, or if removed while
power unit is running will bring the power
unit to a stop.
Pusher/measuring cup
In addition to its ability to act as both a
pusher and a measuring cup, the slimmer
portion of the pusher has a hole at the
bottom to allow it top be used as a funnel
when liquids need to be added to the
mixture in the bowl. See figure 3a.
Dual drives
The Bosch Food Processors come with
three drives:
Filling tray
• A high-speed drive directly coupled to
the motor, used to drive the blender and
other special accessories, located
under the Safety Motor Drive Cover,
figure 2e.
The MCM 5200 UC, Bosch Food
Processor, also comes with a filling tray
that can be mounted on the feeding funnel
to simplify the feeding of material into the
bowl, figure 3b.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
high speed blender drive and pressed
down until it snaps in place.
If high speed blender drive is to be
used, remove the safety motor drive
cover from the high speed blender
drive and place mixing bowl over dual
drive and turn clockwise to lock into
position as shown in figure 4a. Next
place the mixing bowl cover, with
pusher/measuring cup in the feeding
tube, on the bowl. Make sure arrows
on cover and bowl are aligned, so that
tabs on bowl fit into channels in cover
and then turn cover clockwise until tab
on cover enters cover interlock and
turn until tab clicks into place, figure
4b.
Figure 3.
Getting Started
The operation of your Bosch Food
Processor is summarized below.
Specific instructions for using each of the
attachments, provided with the food
processor systems covered by this manual,
follow the summarized instructions. Please
read the specific instructions thoroughly
before using that attachment, paying
particular attention to the IMPORTANT
SAFEGUARDS and WARNINGS provided.
1. Place power unit on suitable work
surface.
Before using the food processor with
any of the attachments, the power unit
should be placed on a suitable work
surface. The surface should be sturdy,
smooth and clean; make sure that
there is no flour or oil on the surface.
A clean, smooth surface will provide
the best footing for the suction cup feet
on the power unit and will limit slipping
and/or “walking,” see figure 2h.
Figure 4.
5. Place selected attachment.
Place the selected attachment on
power unit. See specific instructions
for attachment selected. Specific
instructions are located on pages
listed below:
2. Plug power unit into power supply.
Pull the power unit’s cord out to
appropriate length and plug it into a
convenient nearby outlet.
Attachment
Pages
Bowl w/multifunction blade ..... 10–12
with dough hook .......................... 12
with whipping whisk/beater ..... 13-14
with slicing and grating disc .... 14-16
Blender ..................................... 16–18
Citrus juicer .............................. 19-20
Juice extractor........................... 20–21
3. Select attachment to be used.
Select the attachment you wish to use.
4. Cover the drive not being used.
If dual drive is to be used for selected
attachment, make sure that safety
motor drive cover is placed over the
Table 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
6. Operate unit with rotary switch.
Once the attachment is in place, the
speed of its moving components can
be controlled through the use of the
rotary switch at the front of the power
unit. See figure 2. The rotary switch
has six or four positions, depending
on the model you have:
9. Continue use.
If the attachment was of the batch-feed
type and you wish to continue using
the attachment, empty the bowl or jar
of the attachment per its specific
instructions and reinstall the
attachment as before. Repeat steps
5 through 8 as often as necessary to
complete work.
All MCM models have the following:
a. “M,” a momentary “pulse” position
that provides full speed and power
for the time it is held in position.
10. Work completed,
remove attachment.
If the attachment is of the continuous
feed type or is the batch type and you
have completed the work you wished
to perform with the attachment,
remove the attachment from the power
unit per the instructions for the specific
attachment being used.
b. “O/Off,” the off position.
TheMCM5000and5100have2speeds
c. Two speeds labeled 1 and 2.
Speed 1 is the lowest speed.
The MCM 5200 has 4 speeds:
d. Four speeds labeled 1, 2, 3 and 4.
Speed 1 is the lowest speed. The
speed increases with each
succeeding step up to the highest
speed, speed 4.
11. Place contents (batch-feed type).
If the attachment is the batch feed
type, disassemble per the specific
attachment’s instructions and place
the contents in a suitable container.
12. Care and cleaning.
All models of the Bosch Food
Processor incorporate a built-in safety
cutout switch to protect the motor
against overheating. If the safety
becomes activated, the power unit will
stop. If power unit should stop even
though there is power to the unit see
TROUBLESHOOTING at the back of
this manual .
Once you have completed working
with the Bosch Food Processor, the
next step is to disassemble and clean
the attachments. If you wish to use
another attachment, please return to
step 3, above.
Power unit
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the safety
motor drive cover and reinstall on the power
unit, if necessary. Never use coarse or
caustic cleaning products to clean the
power unit. Never immerse the power unit
in water.
7. Turn power unit off.
When your work with the attachment
is completed or the capacity of the
batch-feed attachment has been
reached, turn the power unit to the Off
position, “O/Off,” and unplug.
8. Remove the attachment.
The power unit may be left on the counter
or stored for future use. If the unit will be
stored, store the cord and lift the power unit
and place in your chosen storage area.
Remove the attachment from the
power unit, per instructions for the
specific attachment being used.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Attachments
6. Always grasp multifunction blade by
top of center column. Do not grip by
the blades.
The attachment(s) that have been used
should be disassembled and washed, dried
and stored for future use.
The Bosch Food Processors are provided
with a three-quart mixing bowl and
multifunction blade, beater or whipping
whisk, dough hook, reversible slicing disc,
reversible coarse grating disc and fine
grating disc (MCM 5200 UC only) as shown
in figure 5.
It is recommended that, after cleaning, the
mixing bowl and its cover be stored on the
food processor. In this way, if you wish at
some later time to use the blender, the
mixing bowl and its cover will already be in
place.
STANDARDATTACHMENTS
How to Use Multifunction Blade
Following are the specific instructions for
the standard attachments provided with the
Bosch Food Processors, covered by this
manual.
All the MCM models comes with the mixing
bowl, cover and pusher/measuring cup and
multifunction blade. The multifunction blade
is intended to be used for mincing, pureeing
and pulverizing of fruits, vegetables, nuts
and dried bread (preparation of bread
crumbs) and the preparation of sauces,
special diet foods, infant foods and mixing.
The multifunction blade should not be used
to process hard cheeses (Parmesan,
Romano, etc.
Mixing Bowl with multifunction blade,
beater or whipping whisk, dough hook,
reversible slicing disc, reversible
grating disc and, MCM 5200 UC only,
fine grating disc
WARNING
Use of mixing bowl with multifunction blade
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
1. There is a risk of injury from rotating
tools when using the mixing bowl with
the multifunction blade, dough hook,
whipping whisk, beater or with discs.
2. Avoid contact with moving parts. Keep
hands, hair and clothing, as well as
spatulas, bowl scrapers and other
utensils away from blades, hooks,
whisk, beater and discs during
operation to prevent injury and/or
damage to the power unit or
accessories.
1. Before using the mixing bowl and
multifunction blade for the first time they
should be washed. See Before Using
for the First Time, on page 4.
3. Always work with the bowl lid cover
fitted in place.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
4. Do not change tools until the power unit
has come to a complete stop; when
switched Off, the power unit will
continue to turn for a brief period.
5. Always place protective cover on
multifunction blade when it is not in
use.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
4. Next place the mixing bowl cover on
the bowl. Make sure arrows on cover
and bowl are aligned, so that tabs on
bowl fit into channels in cover and then
turn cover clockwise until tab on cover
enters cover interlock and turn until tab
clicks into place, figure 6b.
Figure 5.
Figure 6.
5a. Cover w/dual feeding tubes
5b. Cover w/integral feeding tube
5c. Pusher/measuring cup
5d. Multifunction blade w/protective cover
5e. Dough hook
The cover should be in place whenever
the power unit is in operation. The cover
serves to prevent accidental contact
with the moving blade. Also, the power
unit will not operate unless the tab on
the cover is in place and has engaged
the safety cover interlock.
5f. Whipping whisk
5g. Fine grating disc
Placing into Operation w/Multifunction
Blade
5h. Reversible slicing disc
5i. Reversible coarse grating disc
5j. Dough hook
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with multifunction blade is
now ready for operation. The multifunction
blade should only be used using the
momentary contact position ”M” to prevent
over processing of food.
5k. Whipping whisk
3. Engage the multifunction blade on the
dual drive of the power unit by placing
it over the center column, as shown in
figure 6a. Once in place, check to make
sure the multifunction blade has
engaged the dual drive by turning the
multifunction blade while pushing down
until it stops.
Sample recipes may be found in the recipe
section, at the back of this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
How to Use Dough Hook
bowl fit into channels in cover and then
turn cover clockwise until tab on cover
enters cover interlock and turn until tab
clicks into place,
All the MCM models come with the mixing
bowl, cover and pusher/measuring cup. The
MCM 5200 comes with a dough hook, as
shown in figure 5e, while the MCM 5100 and
5200 comes with the dough hook as shown
in figure 5j. Both of these dough hooks are
intended to be used to knead yeast doughs
and to mix cookie and pastry doughs, and
also when adding nuts, chocolate chips,
dried fruit, hard butter or shortening,
hardened brown sugar, etc. to batters.
The cover should be in place whenever
the power unit is in operation. The cover
serves to prevent the escape of flour
dust at the beginning of the stirring and
kneading process, and also serves to
prevent accidental contact with the
moving dough hook. Also, the
power unit will not operate unless the
tab on the cover is in place and has
engaged the safety cover interlock.
Use of mixing bowl with dough hook
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work surface
and switched to the Off position, “O/Off,”
and that you have the safety motor drive
cover in place of the high speed, blender
drive.
Placing into Operation with Dough
Hook
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with dough hook is now
ready for operation. Sample recipes may
be found in the recipe section, at the back
of this manual.
1. Before using the mixing bowl and dough
hook for the first time they should be
washed. See Before Using for the
First Time, on page 4.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
How to Use Whipping Whisk
All the MCM models comes with the mixing
bowl, cover and pusher/measuring cup. The
MCM 5200 comes with a whipping whisk,
as shown in figure 5f, while the MCM 5100
and 5200 comes with a whipping whisk as
shown in figure 5k. Both of these whipping
whisks are intended to be used for very light
substances, such as cream, egg whites,
sauces, batters and light pastry doughs
that are thin enough to pour.
3. Engage the dough hook on the dual drive
of the power unit by placing it over the
center column, as was done with
multifunction blade, in figure 5a. Once
in place, check to make sure dough
hook has engaged the dual drive by
turning the dough hook counterclockwise
while pushing down until it stops.
The dough hook should be used for all
heavier substances such as cookie doughs,
yeast doughs, pastry doughs and other
heavy doughs. The dough hook should
always be used when adding nuts,
chocolate chips, dried fruits, hard butter or
other fats, hardened brown sugar, etc. to a
mixture.
4. Next place the mixing bowl cover on
the bowl. Make sure arrows on cover
and bowl are aligned, so that tabs on
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Use of mixing bowl with whipping whisk
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
the whipping whisk has engaged the
dual drive by turning the whipping whisk
counterclockwise while pushing down
until it stops.
1. Before using the mixing bowl and
whipping whisk for the first time they
should be washed. See Before Using
for the First Time, on page 4.
Figure 7.
Figure 8.
The whipping whisk, supplied with the
MCM 5200 UC, may be removed from
its holder as shown in figure 7, and
washed in the dishwasher along with
the mixing bowl and other components.
After washing, rinse well and dry the
whisk and whisk holder before
reattaching the whisk.
4. Next place the mixing bowl cover on
the bowl. Make sure arrows on cover
and bowl are aligned, so that tabs on
bowl fit into channels in cover and then
turn cover clockwise until tab on cover
enters cover interlock and turn until tab
clicks into place,
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
3. Engage the whipping whisk on the dual
drive of the power unit by placing it over
the center column, as shown in figure
8. Once in place, check to make sure
The cover should be in place whenever
the power unit is in operation. The cover
serves to prevent the escape of flour
dust at the beginning of the stirring
process, and also serves to prevent
accidental contact with the moving
whipping whisk. Also, the power unit
will not operate unless the tab on the
cover is in place and has engaged the
safety cover interlock.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Placing into Operation with Whipping
Whisk
WARNING
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with whipping whisk is now
ready for operation. Sample recipes may
be found in the recipe section, at the back
of this manual.
1. Blades on discs are sharp. Handle
carefully. Always use the center plastic
holder to lift or handle discs. Do not
grip the discs by the blades or metal
surfaces.
2. When operating using the slicing or
grating discs keep hands clear of
filling tube. Only work with pusher.
3. Always operate the power unit with
the cover in place.
Mixing bowl tips:
1. When using the mixing bowl to knead
or mix a recipe designed to be
prepared by hand, you will find that with
the Bosch Food Processor you can
usually place all the ingredients in the
mixing bowl at once. When doing this,
always place the liquids in first. This
will assure more thorough mixing.
2. When adding ingredients to a mixture:
a. Turn the rotary switch to a lower
speed
Use of mixing bowl with slicing or grating
discs
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
b. Remove the pusher/measuring cup
c. Add the ingredients through the
feed tube and replace the
pusher/measuring cup.
1. Before using the mixing bowl and
slicing or grating discs for the first
time they should be washed. See
Before Using for the First Time, on
page 4.
3. If a large batch of dough is to be left in
the mixing bowl and allowed to rise, the
cover should be removed and placed
loosely on the bowl so that it is free to
move if the dough should begin to press
on it.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
How to Use Slicing and Grating Discs
All the MCM models comes with the mixing
bowl, cover and pusher/measuring cup and
reversible slicing disc and reversible coarse
grating disc, see figures 5h and 5i. The
MCM 5200 also comes with a fine grating
disc, as shown in figure 5g. The slicing disc
and the grating discs are intended to be
used for slicing and/or grating of vegetables,
as well slicing/grating of soft cheeses and
sausages or meat and grating of vegetables
and hard cheese.
3. Engage the slicing or grating disc,
by picking up the disc you wish to use,
with the side you wish to use facing
upward, by the plastic holder in the
center of the disc and placing over the
rectangular shank of the dual drive of
the power unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
• place the cut zucchini or carrots in
the feeding tube on end until the
feeding tube is packed.
WARNING
The blades on the discs are very sharp.
Handle with care. Use center plastic holder
when handling discs.
To slice a single narrow item, a carrot for
example:
• place the carrot in the feeding funnel
opposite the cutting edge of the disc.
4. Next place the mixing bowl cover on
the bowl. Make sure arrows on cover
and bowl are aligned, so that tabs on
bowl fit into channels in cover and then
turn cover clockwise until tab on cover
enters cover interlock and turn until tab
clicks into place,
The wall of the feeding funnel will then serve
to hold the piece vertical.
When using the slicing or grating discs be
sure to watch the level in the bowl and stop
the slicing or grating before the level of the
material being sliced, or grated reaches the
level of the disc holder.
The cover should be in place whenever
the power unit is in operation. The cover
serves to prevent accidental contact
with the moving disc. Also, the power
unit will not operate unless the tab on
the cover is in place and has engaged
the safety cover interlock.
Slicing and grating tips:
1. Shopping for fruits and vegetables that
will fit into the feeding funnel will simplify
food preparation.
2. Foods that are to be used together may
be sliced together. This can be used to
your advantage. For example, green
onions and celery are often used
together, but feeding the green onions
into the feeding funnel alone is difficult.
Try slicing the green onions at the same
time as the celery by interspersing
them in the feeding funnel with the
celery.
Placing into Operation with Slicing or
Grating Disc
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with the slicing or grating
disc is now ready for operation.
3. Use the slicing disc to shred lettuce.
4. Do not overcook potatoes that are to
be sliced. Also it is recommended that
you let them cool first. Potatoes must
be cool and firm to obtain the regular
slices.
Place items to be sliced, shredded or
grated in feeding funnel and be sure to use
the pusher to feed items into the discs when
in operation.
Learning how to feed food properly into the
feed funnel is the most important factor for
proper slicing and grating:
1. For long slices or long shreds, place
food into the feeding funnel lengthwise.
2. For short or circular slices, place food
in the feeding tube on end. For
example, if you wish to have circular
slices of zucchini or carrots:
If the slicing/grating disc do not turn (even
after trying the highest speed) and it is
humming the disc has become blocked by
the contents. The power unit should be:
1. Switched to the Off position, “O/Off,”
and unplugged.
2. The top cover should be removed and
the items causing the blockage
removed.
• cut to length not to extend above the
top of the feeding tube.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
If power unit is not functioning see
TROUBLESHOOTING section.
Note: The mixing bowl and its cover must
be in place with the top cover rotated
clockwise so that tab on cover
engages the cover interlock before
the blender can be used. See below.
Removing Contents
Before beginning to remove the contents
from the mixing bowl, make sure that the
power unit has been turned to the Off
position, “O/Off,” and unplugged. Remove
the cover by turning counterclockwise and
lifting off. Once the cover has been
removed, whatever tool was being used in
the bowl may be removed by lifting it straight
up.
Blender with Unbreakable Plastic Jar
The MCM 5100 UC and MCM 5200 UC
Bosch Food Processor include the blender
accessory. The blender accessory consists
of the components shown in figure 9.
The mixing bowl can be removed from the
power unit by turning the bowl
counterclockwise while lifting.
WARNING
1. There is a risk of injury from sharp
blades when using the blender
attachment.
The contents may now be used as desired.
2. Keep hands and utensils out of the
blender jar while it is attached to the
power unit.
Care and Cleaning
of Bowl and Its Accessories
The mixing bowl, multifunction blade,
whipping whisk, dough hook, reversible
slicing disc, reversible grating disc and fine
grating disc are dishwasher safe.
3. Blades are sharp. Handle carefully.
4. Always operate the blender with the
cover in place. Always hold cover in
place while operating the blender to
prevent cover from coming loose.
5. The use of attachments, including
canning jars, not recommended by
the manufacturer, may cause a risk
of personal injury.
It is recommended that the whipping whisk
be removed from its holder for cleaning.
After washing, rinsing and drying, the whisk
may be placed back on the whisk holder
by reversing the action to remove it, see
figure 7.
6. When blending hot and/or frothing
liquids, process a maximum of 18 fluid
ounces (0.5 litres) at a time.
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the safety
motor drive cover and reinstall on the power
unit, if necessary. Never use coarse or
caustic cleaning products to clean the
power unit. Never immerse the power unit
in water.
How to Use Blender
The blender is intended to be used for
crushing ice; mixing liquids; pureeing
vegetables; preparing special diet and infant
foods; pulverizing fruit, vegetables, nuts and
dried bread (for bread crumbs); and
preparing mayonnaise and sauces.
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off.”
It is recommended that, after cleaning, the
mixing bowl and its cover be stored on the
food processor. In this way, if you wish to
at some later time to use the blender the
mixing bowl and its cover will already be in
place.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
1. Before using the blender for the first
time it should be washed. See Before
Using for the First Time, on page 4.
4. Place the blender jar/blade assembly
on the high speed blender drive of the
power unit and turn clockwise to lock
in place, see figure 10a. Then place
cover with cover closure/funnel on
blender jar and turn clockwise to lock
in place, figure 10b.
Do not place the blender jar/blade
assembly in the dishwasher or allow it
to stand in water. This will tend to wash
out the lubricant. After cleaning, rinse
thoroughly and dry before using.
Figure 10.
Placing Blender into Operation
Figure 9.
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The blender is now ready for operation.
9a. Cover closure/funnel
9b. Cover
9c. Blender jar/blade assembly
2. Remove the safety motor drive cover
from the high-speed blender drive.
Normally when blending, the blender jar
should be filled with the entire amount of
material to be blended, if possible, before
switching the appliance on. The cover and
cover closure should always be in place after
filling the blender jar and before switching
the power unit to On. Any subsequent
additions to the blended material should be
made through the cover opening, see figure
10. For solids and/or granular material,
remove the cover closure/funnel to add the
material, as shown in figure 11b. For liquids,
3. Then place the mixing bowl on the dual
drive of the power unit, as shown in
figure 4a, and turn the bowl clockwise
with a slight downward pressure until
bowl is firmly seated. Next place the
mixing bowl cover, with pusher/
measuring cup in the feeding tube, on
the bowl. Make sure arrows on cover
and bowl are aligned, so that tabs on
bowl fit into channels in cover and then
turn cover clockwise until tab on cover
enters cover interlock and turn until tab
clicks into place, figure 4b.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
When the blender is being used on dry
materials, such as nuts or dry bread, the
best results will be obtained when the
blender jar is filled with approximately 1/2
cup of material to be blended.
the closure/funnel may be left in place and
the liquids added by pouring it into the
closure/funnel, see figure 11a.
Example of Use of Blender
To familiarize you with the operation of the
blender, a sample recipe for mayonnaise is
provided below:
If the blender does not start (even after trying
the highest speed) and it is humming, the
blade has become blocked by the contents.
The power unit should be:
Mayonnaise Recipe
whole egg
1/3 cup of vegetable oil
1. Switched to off, “O/Off,” and unplugged.
2. The mixture should be removed and the
contents at the bottom of the jar
loosened.
1
2
1
tablespoons lemon juice or light
vinegar
teaspoon sugar
If power unit is not functioning see
TROUBLESHOOTING section.
1/2 teaspoon dry mustard
1/2 teaspoon of salt
2/3 cup of vegetable oil
Removing Contents
Before beginning to remove the contents
from the blender, make sure that the power
unit has been turned to the Off position,
“O/Off,” and unplugged. Remove the blender
from the power unit by turning the blender
counterclockwise while lifting. With the
blender removed from the power unit, the
contents of the blender may now be poured
into a suitable container or bowl, as desired.
Mix all ingredients, except final 2/3’s cup
of oil, for a few seconds at speed 1, then
quickly pour the oil in through the opening
in the cover in a uniformly thick stream, as
shown in figure 11a. Operate the blender at
highest speed until mixture is thick and
smooth (approximately 10-20 seconds).
Makes 1 1/4 cups.
Care and Cleaning of Blender
All components of the blender, except the
blender jar/blade assembly, are dishwasher
safe. It is recommended that the blender
jar/blade assembly be cleaned only under
flowing water rather than in the dishwasher.
Soap and detergent will tend to wash out
the bearing lubricant of the blade/base
assembly. Do not use scouring cleaners on
any of the blender parts.
Tips:
The blender should be operated with careful
consideration as to what is required and/or
desired. The speed at which the blender is
operated and the length of operation for a
given job will depend upon the degree of
fineness desired or the amount being
blended.
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the safety
motor drive cover and reinstall on the power
unit, if necessary. Never use coarse or
caustic cleaning products to clean the
power unit. Never immerse the power unit
in water.
Figure 11.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Citrus Juicer
the center column and turning it
clockwise, as shown in figure 13, until
tab on cover enters cover interlock and
turn until tab on the rim of the citrus
juicer clicks into place.
All the MCM models of the Bosch Food
Processors include the citrus juicer
accessory. The citrus juicer accessory is
shown below, figure 12.
Figure 12.
How to Use Citrus Juicer
The citrus juicer fits into the mixing bowl
for juicing of citrus fruits such as oranges,
lemons, grape fruit, etc. The juice is then
collected in the mixing bowl.
Use of mixing bowl with citrus juicer
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
Figure 13.
Placing into Operation w/Citrus Juicer
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with citrus juicer is now
ready for operation.
1. Before using the mixing bowl and citrus
juicer for the first time, they should be
washed. See Before Using for the
First Time, on page 4.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
Citrus juicer tips:
Wash citrus fruit and cut in half for juicing.
Set the rotary switch to speed 2 and press
the fruit on the cone of the juicer. Be sure
to check level of juice in bowl and empty
juice into a suitable container before level
of juice reaches level of bottom of strainer
basket, see Removing Contents, below.
3. Place the citrus juicer on the dual
drive of the power unit by placing it over
Download from Www.Somanuals.com. All Manuals Search And Download.
19
1. Before using the mixing bowl and juice
extractor for the first time, they should
be washed. See Before Using for the
First Time, on page 4.
Removing Contents
Before beginning to remove the contents
from the bowl, make sure that the power
unit has been turned to the Off position,
“O/Off.” Remove the juicer and bowl from
the power unit by turning the juicer and bowl
counterclockwise while lifting. The
contents of the bowl may now be poured
into a suitable container.
Care and Cleaning of Mixing Bowl with
Citrus Juicer
The bowl and citrus juicer are dishwasher
safe. Do not use scouring cleaners on the
bowl or citrus juicer.
The power unit of the food processor should
be cleaned with a clean, damp cloth only.
Never use coarse or caustic cleaning
products to clean this appliance. Never
immerse the power unit in water.
Figure 14.
14a. pusher
14b. cover
14c. grater
14d. strainer
Juice Extractor
The MCM 5200 UC, Bosch Food
Processor, includes the juice extractor
accessory. The juice extractor accessory
consists of the components shown in figure
14.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
How to Use Juice Extractor
The juice extractor is intended to be used
with the mixing bowl to extract the juice
from:
•
•
•
•
hard fruits such as apples, pears,
berries
pitted fruits
vegetables such as carrots and
tomatoes.
3. If the grater has not already been
reassembled in the strainer after
washing, place grater in the strainer of
the juice extractor, making sure the two
hooks on the strainer enter the two
slots on the grater, and turn grater
counterclockwise to lock grater and
strainer together. Place grater/strainer
assembly on the dual drive of the power
unit by placing it over the center
column, as shown in figure 15a. Then
Use of mixing bowl with juice extractor
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
place the cover, with pusher on the bowl
and turn clockwise until tab on cover
enters cover interlock and turn until tab
clicks into place, figure 15b.
turning the cover counterclockwise while
lifting. Then remove the grater/strainer.
Empty pulp from the strainer, as required.
If bowl needs to be emptied, pour juice into
a suitable container.
Placing into Operation with Juice
Extractor
Care and Cleaning of Mixing Bowl with
Juice Extractor
The bowl and juice extractor are dishwasher
safe. Do not use scouring cleaners on the
bowl or juice extractor.
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with juice extractor is now
ready for operation.
With the power unit turned Off and
unplugged, it should be cleaned only with
a clean, damp cloth. Then wipe off the safety
motor drive cover and reinstall on the power
unit, if necessary. Never use coarse or
caustic cleaning products to clean the
power unit. Never immerse the power unit
in water.
It is recommended that, after cleaning, the
mixing bowl and its cover be stored on the
food processor. In this way, if you wish at
some later time to use the blender, the
mixing bowl and its cover will already be in
place.
Figure 15.
Juice Extractor tips:
Wash fruit and cut to fit into feeding funnel,
as required. Set the rotary switch to speed
3 and feed fruit through feeding tube. Use
pusher to feed in fruit, using light pressure.
Be sure to check level of juice in bowl and
empty juice into a suitable container before
level of juice reaches level of bottom of
strainer basket. Also watch strainer for pulp
buildup and, if necessary, stop the power
unit and remove pulp. See Removing
Contents, below.
Removing Contents
Before beginning to remove the contents
from the bowl or pulp from the strainer, make
sure that the power unit has been turned to
the Off position, “O/Off.” Remove the cover
of the juice extractor from the bowl by
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Service and Repair
The Bosch Food Processors require no special care other than the care and cleaning noted
in this manual. If you are having a problem with your food processor, before calling our
Customer Support group, please refer to the TROUBLESHOOTING section below. If, after
reviewing the troubleshooting section and trying its remedies, you are still having a problem,
please do contact us by either writing to us at:
•
Bosch Small Appliances
Customer Support
BSH Home Appliances
5551 McFadden Avenue
Huntington Beach, CA 92649
or e-mailing us at:
or calling us at:
•
•
1 (866) 44BOSCH
[1 (866) 442-6724]
If you do write to us, please include your e-mail address or a daytime telephone number
where you may be reached.
Also, to view our full product line, please visit our Web site:
•
Download from Www.Somanuals.com. All Manuals Search And Download.
22
TROUBLESHOOTING
Problem
Possible Cause
Remedy
Power
unit does
not
1.A circuit breaker may have
tripped or a fuse has blown
in the power supply circuit.
Reset circuit breaker or
replace fuse.
function
2.Safety motor drive cover is
not in place on high speed,
blender drive, when dual
drive is being used.
Place safety motor drive cover on
high speed blender drive.
3.The built-in safety cutout
may have tripped.
If the safety has tripped due to
overheating:
> Turn the power unit to the Off
position, “O/Off,” and unplug.
> Remove the attachment that was
in use when safety tripped, and
correct whatever the situation
is that caused the safety to trip.
> Contact Bosch Small Appliances
Customer Support, see page 22,
for closest Bosch authorized
service center.
> Take, or ship, the food processor
to a Bosch authorized service
center to have the safety cutout
replaced.
Rotary switch
will not turn
1.Safety cover interlock is not
engaged.
Safety cover interlock must be
engaged before rotary switch can
be turned. Rotate bowl cover or
juicer tab clockwise until interlock
tabs clicks into place.
Power
unit hums
but
nothing is
moving
1.The motor has become
blocked; that is, the
attachment being used has
become jammed.
> Turn the power unit to the Off
position, “O/Off,” and unplug.
> Remove the attachment
that was in use and correct
whatever the situation is that
is causing the blockage.
> Reinstall the attachment and
resume use per attachments
instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Sample Recipes
Salsa
Fruit Smoothies
2
2
1/2
1
1–2
1
cups fruit juice
cups frozen fruit
can frozen juice concentrate
cup fruit-flavored yogurt
cups of ice
Chop the following ingredients in Bosch
blender or food processor, on highest speed:
1–4
Dried Arabol Chilies
(start with one, add more for
increased spiciness)
clove garlic
fresh banana
1
Place all ingredients in Bosch blender and
mix until smooth, on highest speed.
Experiment with different flavor
combinations such as tropical, berry or
melon.
1/8
8
cup water
ounces tomato sauce (add
half)
Next add:
1 1/2 teaspoons oregano
3/4
1
teaspoons cumin
bunch of fresh cilantro
pinch of salt
second half of tomato sauce
French Bread
Blend all ingredients, on speed 1 or 2, until
smooth.
4
tablespoons active dry yeast
3 1/2 cups hot water
5
2
1
tablespoons sugar
tablespoons salt
cup vegetable oil
Pesto
1
cup loosely packed basil
leaves
cup grated Parmesan
8–10 cups of flour (white or wheat)
tablespoons gluten
4
1/2
1/3-1/2 cup olive oil (enough for
desiredconsistency)
Place all ingredients in Bosch mixing bowl.
Thoroughly knead on speed 1 (8–10
minutes). Let rise in the bowl 10 minutes,
then punch down. Punch down 4 or 5 times.
Divide into 3–4 regular loaf pans or shape
into rounds. Slash tops with sharp knife and
brush with egg wash. Let raise until doubled
in size. Bake 30 minutes at 400° F.
1–2
1/4
cloves garlic
cup shelled pinenuts
Lightly toast pinenuts. Let cool. Place olive
oil in Bosch blender or food processor. Turn
on power and gradually add Parmesan
cheese, garlic and basil leaves. Process,
on speed 1 or 2, until smooth. Add pinenuts
and blend thoroughly.
Toss with cooked pasta or spread on bread
or crackers.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Oatmeal-Chocolate Chip Cookies
2
1
2
1
cups packed brown sugar
cup shortening
eggs
teaspoon vanilla
1–3/4 cups flour
1
teaspoon baking soda
1/2
3
1
teaspoon salt
cups quick-cooking rolled oats
cup chocolate chips
Cream the brown sugar, shortening, eggs
and vanilla in the mixing bowl, on speed 1
or 2.Add flour, baking soda and salt. Blend
well, stir in rolled oats and chocolate chips
by hand. Drop by spoonfuls onto greased
baking sheets. Bake in a 350° F oven for 8–
10 minutes. Cool before removing from pan.
Makes 5 dozen.
Acknowledgments:
The sample recipes listed above were sub-
mitted by:
Salsa - Caroline Ciarelli, BSH Home
Appliances
Pesto - Kitchen Resource
Fruit Smoothies - Marni Rader, BSH
Appliances
French Bread - Kitchen Resource
Oatmeal-Chocolate Chip Cookies -
Kitchen Resource
Download from Www.Somanuals.com. All Manuals Search And Download.
25
I mportant Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
26
BOSCH Small Appliance Warranty
BSH HomeAppliances (“BOSCH”) warrants all new small appliances to be free from original
defects in design, materials and workmanship for one (1) year after the sale to the original
owner.
Within the stated warranty period, BOSCH will repair or replace, at its sole option, any
small appliance or parts thereof which prove defective under the conditions of normal use
and service at no charge to you. It is the owner’s responsibility to return the appliance for
repair. Repaired and replacement small appliances and parts shall be the same or as
close in appearance as possible to the original for the purposes of this warranty.
Should you require service of your BOSCH small appliance, please contact customer
service at 1-866-44-BOSCH. Repair of BOSCH appliances should only be performed by
qualified technicians.
This warranty is limited to the original consumer purchase and is not transferable. Specifically
excluded from this warranty are failures caused by accident, misuse, neglect, abuse,
including tampering, use of frequency or voltage other than marked on the product, and
use for commercial purposes.
To the extent allowed by law, this warranty sets out your exclusive remedies, whether for
negligence or otherwise. BOSCH will not be liable for any consequential or incidental
damages, losses or expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED
WARRANTIES. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR
MERCHANTABILITY OR FITNESS FORAPARTICULAR PURPOSE OR OTHERWISE,
SHALL BE EFFECTIVE ONLYFOR THE PERIOD THAT THIS EXPRESSED WARRANTY
IS EFFECTIVE. BOSCH DOES NOTASSUMEANY RESPONSIBILITY FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
No attempt to alter, modify or amend this warranty shall be effective unless authorized in
writing by an officer of BOSCH. Some states do not allow limitations on how long implied
warranties last or the exclusion or limitation of incidental or consequential damages, so
the foregoing limitations and exclusions may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Looking for more information about BOSCH products?
Visit our Web site:
Download from Www.Somanuals.com. All Manuals Search And Download.
28
|