RPK88 Rack Mount Kit
Installation and Use Manual
The RPK88 Rack Mount Kit is designed to flush mount the components of a PCM system.The RPK88 will hold up to ten
modules in two assemblies.The RPK88 allows easy mounting of these modules in a standard 19-inch audio rack.The kit
includes twelve wiring saddles, eight mounting brackets, and eight #6 x 1/4” screws.
RPK88 Mounting Plate
1
START HERE
Remove additional panels to fit
assembled PCM system (beginning
here, then work left to right)
Knock-out panels (nine total)
(Panel left open)
#6 x 1/4”
Mounting
Screws (8)
Brackets (8)
Four
Modules
Max.
Six
Modules
Max.
Wiring
Saddles (12)
Plug wiring saddles into any of
12 staggered holes as needed
Knock-out panel for power supply
power cord (as needed, two total)
Knock-out panels for wiring
access (as needed, six total)
1
Remove appropriate knock-
out panels.
2
Attach mounting brackets
to top and bottom corners
of module assembly.
Use screws included with
modules.
3
2
3
Attach module assembly
to RPK88 using #6 x 1/4”
screws.
See PCM system instructions
for module assembly.
2
© 2005 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2146-01A 0601
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|