Components Assembly
Models BBSM6, BBFM6, FMHAR8, & SGHD8
For use with 8" cone loudspeakers
For use with FMH15T horn loudspeaker
1) Place gasket supplied with FMH15T onto FMHAR8
Adapter Ring over the studs. Then mount FMH15T to
FMHAR8Adapter Ring, sliding flange hole over adapter ring
studs and secure with nuts supplied with adapter ring.
1) Slide 8" cone speaker over studs in SGHD8 Grille and
secure with nuts supplied with grille.
2) Mount BBSM6 or BBFM6 enclosure as necessary.
3) Use 4 white security screws and tool supplied with
SGHD8 Grille to mount the speaker/grille assembly onto
the enclosure.
2) Slide FMH15T/FMHAR8 assembly over studs in SGHD8
Grille and secure with nuts supplied with grille.
3) Mount BBSM6 or BBFM6 enclosure as necessary.
4) Use 4 white security screws and tool supplied with
SGHD8 Grille to mount the speaker/grille assembly onto
the enclosure.
© 2005 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2136-01A 0505
Download from Www.Somanuals.com. All Manuals Search And Download.
|