To prevent accidents and machine damage, read these
instructions before installation or use. Use the washer only as
instructed in this owner’s guide and installation instructions
included with your washer. Keep this guide for future
reference
Front-Loading Automatic Washer
WM 67121 NBL00
Owner’s Guide & Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Special programs . . . . . . . . . . . . . . .21
Auxiliary functions (Options). . . . . . . .22
Time display . . . . . . . . . . . . . . . . . . .22
Changing the delay time . . . . . . . . . .23
Canceling the time delay . . . . . . . . . .23
Starting the Program . . . . . . . . . . . . .23
Progress of program . . . . . . . . . . . . .23
Changing the selections after the
1 Your Washer
Overview . . . . . . . . . . . . . . . . . . . . . . .4
Specifications . . . . . . . . . . . . . . . . . . .5
4
2 Important Safety Instructions6
3 Installation Instructions
9
The Right Location of Installation . . . . .9
Installation Clearances. . . . . . . . . . . . .9
Allowable Clearances for Undercounter
Installation . . . . . . . . . . . . . . . . . . . . .10
Allowable Clearances for Closet
program has started . . . . . . . . . . . . .23
Child-proof lock. . . . . . . . . . . . . . . . .24
Ending the program
through canceling . . . . . . . . . . . . . . .24
Installation . . . . . . . . . . . . . . . . . . . . .10
Stacked Installation . . . . . . . . . . . . . .10
Removing packaging reinforcement. .10
Removing shipping bolts . . . . . . . . . .10
Levelling the washer . . . . . . . . . . . . .11
Electrical Connection. . . . . . . . . . . . .11
Power supply and circuit . . . . . . . . . .12
Water Supply Connection . . . . . . . . .12
Drainage . . . . . . . . . . . . . . . . . . . . . .13
Installation Checklist . . . . . . . . . . . . .13
Transportation . . . . . . . . . . . . . . . . . .14
Disposal Information . . . . . . . . . . . . .14
Appliance Disposal . . . . . . . . . . . . . .14
6 Quick instructions for daily use
25
7 User maintenance instructions
26
Cleaning detergent dispenser . . . . . .26
Cleaning the door seal . . . . . . . . . . .26
Cleaning the outer cabinet and control
panel . . . . . . . . . . . . . . . . . . . . . . . . .26
Cleaning the water inlet strainers . . . .27
Cleaning the drain pump filter . . . . . .27
Descaling the washer . . . . . . . . . . . .28
8 Troubleshooting
29
4 Operating Instructions
15
First Use . . . . . . . . . . . . . . . . . . . . . .15
Laundry Tips . . . . . . . . . . . . . . . . . . .15
Preparing the laundry. . . . . . . . . . . . .16
Loading the washer. . . . . . . . . . . . . .16
Detergent Use . . . . . . . . . . . . . . . . . .17
Detergent Quantity . . . . . . . . . . . . . .17
Detergent Dispenser . . . . . . . . . . . . .17
Water Consumption. . . . . . . . . . . . . .18
9 WARRANTY STATEMENT
FOR THE BLOMBERG CLOTHES
WASHERS
38
10 HOW TO GET SERVICE
39
5 Selecting a program and
operating your washer
19
Control panel. . . . . . . . . . . . . . . . . . .19
Turning the washer on . . . . . . . . . . . .19
Program cycle selection. . . . . . . . . . .19
Program Cycle Selection Table . . . . .20
Wash Cycles . . . . . . . . . . . . . . . . . . .21
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
1 Your Washer
Overview
3
4
3
1
2
2
5
6
4
1 - Detergent Dispenser
2 - Loading Door
3 - Top Lid
4 - Control Panel
5 - Filter Cap
6 - Height-adjustable Feet
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
4
Specifications
Front Loading Automatic Washer
Models
WM67121NBL00
33 (85)
Height (in/cm)
Width (in/cm)
23 (59.5)
Depth (in/cm)
21 (54)
Net Weight (lbs/kg)
Electricity (V/Hz.)
156 / 71
208-240 / 60
10
Total Current (A)
Total Power (W)
2350
Spinning cycle (rpm max.)
Water pressure (psi)/(bar)
Drain height (ft.)/(m.)
Wash capacity (cu. Ft.)/(Lt.)
Dry Load Capacity (lbs)/(kg)
1200
15-145 psi (1-10) bar
4.9 ft (1.5m)
1.88 cu. Ft.
15.4 (7)
Specifications of this appliance may change without notice to improve the quality of
the product. Figures in this guide are schematic and may not match your product
exactly.
Values stated on the washer labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, these values may vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
2 Important Safety Instructions
• Do not tamper with controls.
BWARNING - To reduce the risk of fire,
electric shock or injury to persons
while using your appliance follow
basic safety precautions, including
the following:
• Do not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in the user-
maintenance instructions or in
published user-repair instructions that
you understand and have the skills to
carry out.
• Read all instructions before using the
washer.
• Do not wash articles that have been
previously cleaned in, washed in,
soaked in, or spotted with gasoline,
dry-cleaning solvents, or other
flammable or explosive substances
(acetone, alcohol, kerosene, some
liquid household cleaners, some spot
removers, turpentine, waxes and wax
removers) as they give off vapors that
could ignite or explode.
• This appliance must only be used
for the purpose of washing, rinsing
and spinning machine-washable
items using laundry additives that
are suitable for use in washers . The
appliance manufacturer cannot be
held responsible for damage caused
by improper or unintended use of the
appliance.
• Only detergents, softeners and
additives suitable for use in HE (High-
efficiency) washers may be used.
Always follow the instructions and
information given by the laundry
detergent manufacturers when using
these products.
• Do not add gasoline, dry-cleaning
solvents, or other flammable or
explosive substances to the wash
water. These substances give off
vapors that could ignite or explode.
• Under certain conditions, hydrogen
gas may be produced in a hot-water
system that has not been used for 2
weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot-water system
has not been used for such a period,
before using a washing machine,
turn on all hot-water faucets and
let the water flow from each for
several minutes. This will release any
accumulated hydrogen gas. As the
gas is flammable, do not smoke or
use an open flame this time.
• Do not allow children to play on or
in the appliance. Close supervision
of children is necessary when the
appliance is used near children.
• Before the appliance is removed from
service or discarded, remove the
door and the power cord / main plug
to prevent accidents.
• Always follow the fabric
care instructions of garment
manufacturers.
• Do not touch the door glass while
washing at high temperatures.
Danger of burning!
• Do not sit on top of the washer.
• Do not climb onto the washer.
• Destroy the shipping carton, plastic
bag and other packing materials
after the washer is unpacked. Keep
children away from these packing
materials. Danger of suffocation from
plastic sheets and cartons!
• Do not reach into the appliance if
the drum is moving. Wait until the
drum has completely stopped before
opening the door.
• Do not install or store this appliance
where it will be exposed to the
weather and direct sunlight.
• Do not mix chlorine bleach with
ammonia or acids such as vinegar
and/or rust remover when washing.
This mixture can produce hazardous
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
6
fume which may cause death.
• Do not operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or
broken parts, including a damaged
cord or plug.
• Store laundry detergents and
additives in a cool, dry place out
of children’s reach due to danger
of chemical poisoning and skin
irritation. Follow the manufacturers’
instructions when using laundry
products.
• Do not machine wash fiberglass
materials. Small particles can stick
to fabrics washed in following cycles
and may lead to skin irritation.
• Do not wash items stained with
vegetable oil, cooking oil or
• Always be sure to empty all foreign
materials from the pockets of your
clothing as small items such as coins,
pins etc could severely damage the
appliance.
• Do not install and operate the
appliance in places exposed to
temperatures below freezing. Frozen
water may cause severe damage by
bursting hoses and pump.
• Make sure that shipping bolts are
removed before you operate the
washer. If service is required as a
result of not removing the bolts, it will
not be covered by the warranty.
• Make sure that the wash drum is
empty before you load the washer.
• Do not store and use any flammable
and combustible substances such
as lint, paper and chemicals near the
appliance.
• Always follow the manufacturer’s
instructions when you are using
a descaling agent. Be sure that
descaling agent contains rust-
protective materials and rinse the
washer a few times thoroughly
after the descaling process (See,
Descaling the washer).
petroleum. These items may contain
some flammable oils after laundering
and the fabric may smoke or catch
fire by itself.
• Be sure to unplug the power cable
before attempting maintenance
or cleaning of your appliance to
minimize the risk of electric shock.
Always unplug the cable by grasping
the plug, not the cord.
• Do not use wet hands when
plugging/unplugging the power cable.
• Check the water inlet and drain hose
connections regularly for any leakage.
Hoses should be replaced every 5
years.
• Do not leave the washer door open to
prevent children hurt themselves by
hanging on the door or going inside
the drum.
• Be careful when the appliance is
draining hot water. Danger of burning!
• At the end of a washing day, turn
off the water faucets to prevent any
leakage that may occur due to a
faulty condition of the appliance.
• Check the appliance and inlet hose
connections for water leakage after
each use. If there is leakage, turn off
the appliance and water faucets and
call service.
• Install and operate the washer on
a solid floor to prevent vibration or
movement. It is not recommended
to install and operate the washer on
wooden floor or on a carpet.
• The rated voltage of your washer
is 208/240V, so it should not be
directly connected to the mains
of 110/120V. A special junction
box will be provided and used
for the mains connection (See,
Installation Instructions for Grounding
Instructions and Requirements).
• If an abnormal sound is heard during
the washer operation, refer to the
“Troubleshooting” of this guide.
• Call service for checking any possible
damage or fault if the appliance is
dropped or bumped.
• The end of drain hose should not
contact the discharge water in any
way as this might cause siphoning of
water.
• Always leave the property after
checking that the wash cycle is
• Do not machine wash items having
large or heavy metal parts such as
buttons or buckles. These items
could severely damage the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
completed and the washer is turned
off.
• Damaged or worn power cords and
plugs must only be replaced by a
Blomberg Service technician.
• Never use an extension cord or
adapter to connect the appliance to
the electrical power due to the risk of
electric shock and/or fire.
• All broken and faulty components,
panels and parts must only be
replaced with original Blomberg
spare parts by a Blomberg Service
technician.
• Do not force the washer door open
when it is locked. The door must
be closed any time during the
programme cycle.
• Do not use fabric softeners or
products to reduce static unless
recommended by the manufacturers
of the fabric softener product.
• Check the drain pump filter
occasionally to remove coins, buttons
and such small objects.
• Always drain off the water completely
before cleaning the pump filter, before
transporting the washer, when there
is a danger of frost and when there
is a power failure (For emergency
draining, See User maintenance
instructions).
• Always be sure that the washer
has been properly installed by
licensed personnel, water and
electrical connections and grounding
conform to all relevant codes and
requirements.
• This manual does not cover every
possible condition and situation that
may occur. Use common sense and
caution when installing, operating,
and maintaining any appliance.
SAVE THESE INSTRUCTIONS
Always follow the instructions on this
user guide. If you aren’t sure how to
perform them, please call Customer
Service for assistance and scheduling
service.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
8
3 Installation Instructions
• It is not recommended to install and
operate the washer on a wooden
floor or soft floor. If you have to install
your washer on a wooden or frame
construction floor, the floor must be
reinforced properly and the washer
must be located in the corner of the
room if possible.
• Never place your washer on a carpet.
This prevents air circulation. The
electrical components of the machine
may overheat and cause damage.
• Do not stand appliance on the power
cable.
• Do not install and operate your
washer in ambient temperatures
lower than 32˚F (0˚C). Controls
may stop working properly in such
condition.
• If there is danger of frost, drain
all remaining water in pump and
hoses since it may freeze and cause
damage by bursting them (see
“Cleaning the drain pump filter”).
Read this first !
This washer can be individually installed
in free-standing and built-in installations.
You can also install your washer with
your dryer as a free-standing or built-in
pair. Before you install your appliance,
read the following instructions
completely and carefully:
• Save these instructions for future
reference.
• This appliance must be properly
installed and grounded by qualified
and skilled technicians in accordance
with all local codes and ordinances
and the latest edition of the National
Electrical Code, ANSI/NFPA 70.
• Proper installation of this appliance
is the responsibility of the owner and
failure due to improper installation is
not covered by the warranty.
The Right Location of
Installation
You can install your washer in a
basement, closet or in a laundry room
if the location has proper drainage,
plumbing and power supply system.
Always follow these instructions for
installation:
Installation Clearances
C The installation location must be large
enough for the washer door to be
fully opened for loading.
C The installation location must be
large enough for ease of operation,
maintenance and service.
C Ensure there is min 1/2” of clearance
on each side of the washer to allow
slight side ways movement during
washing and spin drying.
• Do not install or store this appliance
where it will be exposed to the
weather, rain, damp places, water
and direct sunlight. The ambient
temperature must be higher than
60°F (15.6°C) for proper operation.
Installation location must have the
proper ventilation.
• Do not store and use any flammable
and combustible substances such
as lint, paper, curtains, gasoline, coal
and liquid or vapor chemicals near
the appliance.
• Install and operate the washer on a
strong solid concrete floor to prevent
vibration, noise or movement in case
of load unbalance. The floor must
have sufficient load carrying capacity
and the washer must be leveled
properly before the operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
EN
installation, following configuration is
necessary:
Allowable Clearances for
Undercounter Installation
The dimensions are for the
A louver having minimum 23 in2 (148
cm2) air opening located at 3 in (7.62
cm) height from the bottom of closet
door (for washer) & A louver of minimum
46 in2 (297 cm2) air opening located at
3 in (7.62 cm) distance from the top of
closet door (for dryer).
recommended spacing. Counter depth
should be 23.5-24.5”(60-62 cm).
Custom undercounter installation –
Washer only
Removing packaging
reinforcement
Tilt the washer to remove the packaging
reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Minimum counter width should be 50”
(127 cm) for a pair of Blomberg washer
& dryer.
Custom undercounter installation –
Washer & Dryer
Removing shipping bolts
AWARNING - Shipping bolts must
be removed before operating the
washer! Otherwise, the appliance will
50”
(127 cm)
Allowable Clearances for
Closet Installation
When installed in closet (washer only/
washer dryer stacked) :
Sides, Rear, Front 1/2 in. (1.27 cm),
Top= 1 in. (2.54 cm)
Closet door ventilation requirement: A
louver having minimum 23 in2 (148 cm2)
air opening located at 3 in (7.62 cm)
from the bottom of closet door.
Stacked Installation
You can stack your Blomberg washer
and dryer (model no: DV 16540 NBL00)
by using a special stacking kit (Part
No.2967100100). If necessary, consult
your dealer or technical service for
supplying the stack kit. In stacked closet
Download from Www.Somanuals.com. All Manuals Search And Download.
10 EN
be damaged seriously!
with all local codes and ordinances
and the latest edition of the National
Electrical Code, ANSI/NFPA 70.
1. Loosen all the bolts with a spanner
until they rotate freely (“C”)
2. Remove the shipping bolts by
turning them gently.
BWARNING – Improper connection of
the equipment-grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or
serviceman if you are in doubt as to
whether the appliance is properly
grounded.
3. Bolt hole covers (supplied in the bag
with the owner’s guide) are fitted
into the holes on the rear panel with
a special lock mechanism. To fit
the cover, first insert it into the hole
and then rotate it counterclockwise
with a screwdriver until it is locked.
To unlock, apply the procedure in
reverse.
Do not modify the plug provided with
the appliance – if it will not fit the
outlet, have a proper outlet installed
by a qualified electrician.
C Keep the shipping bolts in a safe
place to reuse when the clothes
washer needs to be moved again in
the future.
BWARNING – Be sure that the power
cord is always accessible by the user
after the appliance is installed.
BWARNING – Never use an extension
cord or adapter to connect the
appliance to the electrical power due
to the risk of electric shock and/or
fire.
C Never move the appliance without
shipping bolts properly fixed in place!
Levelling the washer
AWARNING - Do not use any tools to
loosen the lock nuts. Otherwise, they
can be damaged.
It is the personal responsibility and
obligation of the appliance owner to
provide a proper and grounded outlet
installed by a qualified electrician.
BWARNING – Never use a damaged
power cord since there is a risk of
electric shock and/or fire.
1. Manually (by hand) loosen the lock
nuts on the feet.
2. Adjust them until the washer stands
level and firmly.
The damaged power cord must be
replaced by a qualified electrician as
soon as possible.
3. Important: Tighten all lock nuts up
again.
Electrical supply voltage must conform
to the voltage specifications
(208-240V, 60Hz) located on the
appliance. For this purpose, a
junction box (as seen in picture
below) must be obtained. Junction
box is supplied with Blomberg
Clothes Dryer (model no: DV
16540 NBL00) and it works as a
voltage converter from 110/120V to
208/240V between the mains and
appliance.
Electrical Connection
Grounding Instructions
This appliance must be grounded. In
the event of malfunction or breakdown,
grounding will reduce the risk of
electric shock by providing a path of
least resistance for electric current.
This appliance is equipped with a
cord having an equipment-grounding
conductor and a grounding plug.
The plug must be plugged into an
appropriate outlet that is properly
installed and grounded in accordance
BWARNING – Only one appliance must
be connected to a properly grounded
individual branch circuit outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
11 EN
BWARNING – Be sure to unplug
the power cable before attempting
maintenance or cleaning of your
appliance to minimize the risk of
electric shock. Always unplug the
cable by grasping the plug, not the
cord.
BWARNING – Do not use wet hands
when plugging/unplugging the power
cable.
AWARNING – Be sure that the water
connection of this washer is handled
by a qualified service technician or a
plumber.
The washer has two bolted ½’’ water
Power supply and circuit
Connect the clothes washer to the
junction box supplied. Junction box
must be connected to an earthed outlet
protected by a fuse of suitable capacity.
Important:
• Mains connection should comply with
national regulations.
• The voltage and maximum total
current are specified in the section
“Specifications”.
• The appliance must not be directly
connected to the mains in case of
absence of junction box.
• Connection via extension cords or
multi-plugs should not be made.
BWARNING - A damaged power
cable must be replaced by a qualified
electrician.
BWARNING - The appliance must not
be operated unless it is repaired!
There is the risk of electric shock!
supply hoses and ¾’’ female hose
connections that can be connected to
¾’’ hot and cold water faucets.
15 Amp. Fuse or circuit breaker, 208-
240 volt, 60 Hz, grounded, alternating
current
Properly grounded 3-prong receptacle
and junction box to be located so the
power supply cords are accessible when
the washer is in installed position.
AWARNING – Be sure that water
supply hoses are not crushed and
they have no kinking, bulges or cuts
before the water connection.
AWARNING – Be sure that there
are rubber seals located on the
hose connections. These seals
and adjustable bolts ensure a safe
connection without leaking. After
the water connection is done, turn
on both water faucets slowly and
completely to check any water leaks.
Water Supply Connection
Your washer comes with both cold and
hot water connections. Connect the
blue marked cold water supply hose to
the cold water inlet valve/faucet and the
red marked hot water intake hose to the
hot water inlet valve/faucet. Screw the
connecting bolts by hand and tighten
the connection properly using a plier.
Over tightening may cause damage on
bolted connection.
The water pressure must be between
15-145 psi (1-10 bar) for the proper
operation of this washer. 1 bar
corresponds to more than 2.1 US
Download from Www.Somanuals.com. All Manuals Search And Download.
12 EN
gallons (8 liters) per minute flow rate
with a fully open faucet. Water inlet
hoses and valves should withstand a
water pressure of 145 psi (10 bar) at
maximum. If the pressure is higher than
145 psi, a pressure-reducing valve must
be installed before the water inlet. If the
water pressure is lower than 15 psi (1
bar), water fill time may extend or water
inlet valve may shut off completely.
Drainage
AWARNING - Drain hose should not
be bent. Be sure that there are no
kinks or cuts on it.
AWARNING - Drain hose outlet must
not contact the drained water.
Drain hose may be connected into
a sink, into the drain of a sink, to a
standpipe and floor drain.
• When connecting into a sink, the
drain hose should be placed at the
edge of the sink and secured with
the hose guide supplied by the
manufacturer. Additionally, the guided
hose may be tied to the water faucet
with a strap for extra security.
• Drain hose may be connected into
the drain of a sink . Be sure that the
connection is safe and not leaking.
An additional clip etc can be used for
safe connection.
• Drain hose may also be connected to
a minimum 1.26 in (32 mm) diameter
stand pipe.
• Be sure to secure the drain hose
tightly to the pipe (stand pipe, drain
pipe/edge of the sink) with a strap
etc.
• The hose should be placed between
16 and 39 in. (40 and 100 cm) from
the floor level
• If you have floor drain system, you
can place the drain hose in the hole
located on the floor.
• Hot water supply temperature must
not exceed 140˚F (60˚C). (Ideally
120˚F (48˚C))
• Do not connect the washer to an
unpressurized water boiler since
water pressure may not be adequate
for proper operation.
• Do not remove the filters located
on the water supply hoses (on
faucet/hose and hose/inlet valve
connections).
• Always use genuine “Blomberg”
water supply hoses when connecting
with this washer. Old or worn-out
hoses must not be reused. It is
not advised to extend inlet or drain
hoses, if necessary consult your
dealer or technical service about
hose extensions.
• Hot and cold water faucets must
always be easily accessible to the
user.
• At the end of a washing day, turn off
water faucets to prevent any leakage
or water damage that may occur due
to a faulty condition of the appliance.
• Check the appliance and inlet hose
connections for water leakage after
each use. If there is leakage, turn off
the appliance and water faucets and
call service.
• Check the water inlet and drain hose
connections regularly for any leakage.
Hoses should be replaced every 5
years.
• If there is no hot water supply, hot
water valve must be connected to a
cold water faucet nevertheless. Both
water valves should be connected to
water supply for proper operation of
your washer.
Installation Checklist
• Water inlet hoses and accessory
bags must be removed from the
wash drum.
• Transportation/shipping bolts must
be removed.
Download from Www.Somanuals.com. All Manuals Search And Download.
13 EN
• Washer must be properly leveled by
using the adjustable feet.
C Packing materials are made of
biodegradable and recyclable
• Water inlet hoses are connected
to the water faucets, secured and
checked for any leaks by turning on
both faucets.
substances. You should consult your
local authority or dealer about the
environmental-friendly disposal of the
packaging of your appliance.
• Drain installation is done properly and
drain hose is checked and secured to
prevent any flooding.
Appliance Disposal
AWARNING - Be sure to unplug
the power cable, cut off the plug
and disable the door lock before
you dispose your old appliance.
Otherwise there is a risk of injury for
children and pets.
• Washer is connected the junction
box which is plugged to a properly
grounded live mains outlet.
• Be sure that power outlet, water
faucets and drain outlet must be
always accessible to the user.
C Old appliances contain many
recyclable parts. You should consult
your local environmental authority
about a proper disposal. A proper
disposal enables recycling therefore
protects the environment.
Transportation
Before you transport the washer, you
should carry out the following:
1. Turn off both water faucets.
2. Before you disconnect the water inlet
hoses, decrease the pressure inside
hoses by turning on the washer
choosing any wash program. As soon
as the Start/Pause/Cancel led starts
blinking, turn off the appliance. You
may securely disconnect inlet hoses
without any water gush.
3. Disconnect the drain hose and hang
it on the back plate by inserting into
the holder plastic brackets.
4. Unplug the power cord and hang it
on the back plate by inserting into the
holder plastic brackets.
5. Remove bolt hole covers and reinstall
shipping bolts to their places. You
can apply the procedure in chapter
“Removing shipping bolts” in reverse
to accomplish this.
6. Be sure that rubber bushes are
properly located in holes and bolts
are screwed back tightly for secure
transportation of the appliance.
Disposal Information
Packing Disposal
AWARNING - Packing materials of the
appliance are potentially dangerous
for children. Materials such as plastic
bags, films or wrappings must be
kept away from children or disposed
properly to prevent the danger of
suffocation.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 EN
4 Operating Instructions
C Wash the items which are care
First Use
BWARNING – To reduce the risk of fire,
electric shock, or injury to persons,
read the IMPORTANT SAFETY
INSTRUCTIONS before operating this
appliance.
Normal wash
setting
Permanent
Press or Wrinkle
Resistant setting
Gentle/Delicate
setting
Before the first use,
• Be sure that the washer is installed
properly by a qualified installer or
service technician in accordance
with all national and local codes and
requirements.
Do not wring.
Hang dry, drip
dry or dry flat
Hand wash only
Do not wash
Maximum water
temp.140ûF/60ûC
Maximum water
temp.200ûF/95ûC
Maximum water
temp.160ûF/70ûC
• Read all instructions carefully before
using the washer.
• Check that shipping bolts are
completely removed.
Maximum water
temp.120ûF/50ûC
Maximum water
temp.105ûF/40ûC
Maximum water
temp.85ûF/30ûC
• Be sure that the location of installation
has proper electrical supply voltage
(junction box must be used for
connecting the washer to the mains)
and plumbing system needed for the
operation of the appliance.
Anl bleach when
needed
Only non-
chlorine bleach
Do not Bleach
• Turn on both water faucets and be
sure that there are no leaks on hose-
faucet connection points or on hoses
themselves.
This symblol indicates
the fabric should be
dry cleaned only
labeled as “machine-washable”. Do
not machine wash items that are
having
label.
symbol on fabric care
C Sort the laundry according to the
following fabric types, color groups
and wash them separately:
• Check that the wash drum is empty.
• Turn on the washer, choose “sanitary”
cycle on the program selector knob
and start the washer as empty and
without any laundry additives. When
the cycle is finished, your washer is
ready for subsequent uses.
• White and color fast fabrics
• Non-fast, colored fabrics
• Permanent press items(mens shirt,
dress pants, poly-cotton blends)
• Delicate fabrics (silk, rayon etc.)
• Woolens (only wash woolens that are
labeled “machine washable” or “hand
washable”
Laundry Tips
• Hand knits (They should be placed
inside out in the washer)
Sorting the laundry
C Always follow the fabric
care instructions of garment
manufacturers. These instructions
would give you proper guidance
on suitable wash cycles, wash
temperatures and bleach usage.
C Do not wash dark colors with light
colors and whites. Color items may
bleed and white and light colored
items may be discolored. Avoid
Download from Www.Somanuals.com. All Manuals Search And Download.
15 EN
extended contact of damp clothes
before or after washing to prevent
dye transfer.
capacity of the selected program
cycle. Washing results are adversely
affected by an overloaded drum.
Overloading may also cause wrinkling
and abrasion on clothes.
C Wash heavily and lightly soiled items
separately.
C Lint producers (towels, linen etc) and
lint collectors (easy care, permanent
press) should be washed separately.
Lint producers should be washed
inside-out.
Make sure power button is off before
loading the washer. To load the
washer,
• Pull the door handle.
• Place laundry items loosely in the
drum.
• Mix small and large items for an even
load distribution. Large items should
be loaded first. Large items should
not be more than half of the total
wash load.
• If you put a wash bag or net which
is filled with small items in the drum,
put an additional wash bag to
prevent load unbalance. Both wash
bags should have the same amount
of items to provide an even load
distribution.
• Before washing a single or a few
items such as a pillow, a teddy bear,
a single or a pair of shirts, sweat
shirts etc, put some additional items
in the drum for better load distribution
and spinning.
• Make sure that there is no clothing
obstructing the door or caught
between the door and rubber seal.
• Push the loading door firmly shut until
you hear it lock into space.
• If the door is not closed completely,
the machine will not start. This is a
safety precaution. The front door
is locked until end of the washing
program and it can not be opened for
about 2 minutes following the end of
the program.
• Unload the washed items just after
the program cycle has finished. Delay
of unloading may cause wrinkling and
unwanted odor on laundry.
• Check to see any small metal items
such as pins, coins etc left in rubber
seal while unloading the washer.
Any residual metal items may cause
rusting on the rubber seal.
• If there is any water left in rubber seal,
remove with a soft cloth.
Preparing the laundry
• Items of laundry with metal parts (e.g.
underwire bras, belt buckles, metal
buttons) will damage the washer.
Remove metal parts of place the
items in a cloth bag, pillow case, or
something similar.
• Remove any non-washable items
and accessories from laundry before
washing.
• Empty pockets, remove all foreign
objects (e.g. coins, pens, paper
clips). If possible: Turn pockets inside
out and brush.
• Place small items of laundry (e.g.
tights) in a cloth bag, pillow case or
something similar. This can also help
you to avoid searching for lost socks.
• Handle curtains special care. Remove
non-stainless curtain runners and
lead tape. Place runners that can’t be
removed in a cloth bag, pillow case
or something similar.
• Heavy stains should be pretreated
with soapy water appropriately before
washing (Do not rub or scratch the
stained area). If in doubt, check with
a chemist or dry-cleaner.
• Use only dyes/discoloring and anti-
scaling agents suitable for machine
wash. Make sure to follow the
instructions on the package.
AWARNING - Wash jeans, delicates,
pants and sweat-shirts inside-out.
Loading the washer
Maximum load capacity depends on the
fabric type of laundry, soiling amount of
laundry and program cycle you wish to
use.
C Do not exceed the maximum load
Download from Www.Somanuals.com. All Manuals Search And Download.
16 EN
Light soiling
Detergent Use
No visible stains or soiling
Normal soiling
About Detergent
C Your washer is designed to use only
HE (high efficiency) detergents. You
should always look for the following
symbol on the label of detergents:
If you use a non-HE detergent with this
washer, high sudsing will occur. High
sudsing will decrease tumble action
effectiveness, washing and rinsing
performance worsen. Suds may flow
out of detergent dispenser giving
damage to your washer.
A few visible light stains or soiling
Heavy soiling
Highly visible stains or soiling
Detergent Dispenser
Detergent dispenser of your washer
has three separate compartments for
main wash detergent, fabric softener
and liquid bleach. Each of these laundry
additives are automatically dispensed at
appropriate time during wash program.
C Do not put laundry additives directly
in the wash drum. Always use the
detergent dispenser.
C The detergents labeled as “HE
compatible” may also lead to high
sudsing and inefficient tumble action.
Don’t use such detergents.
C After adding laundry additives do not
close the drawer too quickly. This
may cause early dispensing of the
additives thus poor wash results and
fabric damage.
C Do not open the drawer during wash
program (except for addition of liquid
main wash detergent at the beginning
of main wash water intake).
Always follow the instructions and
information given by laundry detergent
manufacturers when using these
products.
AWARNING –Store laundry detergents
and additives in a cool, dry place out
of children’s reach due to danger of
chemical poisoning and skin irritation.
Dispenser compartments are as follows:
-left compartment numbered as “II”
(main wash compartment)
-middle compartment marked as “
(liquid fabric softener compartment)
-right compartment numbered as “I”
(liquid chlorine bleach compartment)
”
Detergent Quantity
The amount of washing detergent to use
depends on the amount of laundry, the
degree of soiling and water hardness.
For small amounts of laundry or only
slight soiling use accordingly less
detergent.
Too much detergent causes an
excessive amount of foaming, bad
washing and rinsing results and a strain
on water resources.
Too little washing detergent causes
laundry to turn grey and calcification of
the machine. Recommended amount of
powder detergent is max. 1/3 cup (80
ml). Recommended amount of liquid
detergent is max. 1/4 cup (60 ml).
(II) Main Wash Detergent
Compartment
Add HE (High efficiency) powder
detergent to this compartment
numbered as “II” before starting the
wash program.
Use the detergent manufacturer’s
dosing cup and follow the instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
17 EN
on the package.
right compartment of the dispenser.
This container ensures dispensing and
dilution of bleach during the first rinse
of wash cycle. There is a maximum fill
line on the container. Do not exceed
the maximum fill line to prevent early
dispensing. Early dispensing may
damage your clothes.
If you use a liquid detergent, be sure
to use a HE (High efficiency) detergent
and add detergent directly to main
wash compartment before operating
C Be sure that bleach container is
present in the right compartment
of dispenser before you add liquid
bleaching agent. You may remove
bleach container if you would not
use bleach. However do not put any
other laundry additives to the empty
compartment.
C Be sure to choose extra rinse option
if you are using bleach in wash
program. Bleach must be rinsed from
laundry properly otherwise it may
cause skin irritation.
your washer. If you observe liquid
detergent stains on washed items,
it is recommended for subsequent
wash cycles that you should add liquid
detergent during first water intake.
Color-safe bleach in powder or liquid
form may be added into main wash
detergent compartment with main wash
detergent. Be sure to use main wash
detergent and color-safe bleach in same
form (either powder or liquid) when
adding into main wash compartment.
Bleach is automatically dispensed and
diluted during the first rinse of wash
program.
C WARNING – Bleach may only
be used in Regular/Cotton and
Permanent Press cycles. Don’t
use bleach with delicates, hand
washables or wools, it will lead to
clothes damage.
Liquid Fabric Softener Compartment
Add the recommended amount of
liquid fabric softener to the middle
compartment marked as “ ” and dilute
it with warm water to the maximum fill
line.
C Especially concentrated fabric
softeners must be diluted with warm
water otherwise siphon may be
clogged in time.
Water Consumption
Your clothes washer automatically
adjusts the water consumption
according to load amount. This feature
ensures high wash performance
results with efficient water and energy
consumption.
Do not fill the fabric softener above the
maximum fill line as any excess amount
will mix into the wash water and you will
have to re-fill the compartment. Do not
pour the softener directly onto laundry, it
may cause stains.
Liquid fabric softener is automatically
dispensed during the final rinse of wash
program.
(I) Liquid Chlorine Bleach
Compartment
Add liquid chlorine bleach to the right
compartment numbered as “I”. Measure
1/3 cup (80 ml) of bleach and pour it
into the special container located in the
Download from Www.Somanuals.com. All Manuals Search And Download.
18 EN
5 Selecting a program and operating your washer
Control panel
10
9
11
12
13
14
8
7
7 - Power button
8 - Program follow-up indicator
9 - Display
10 - Cycle selection knob
11 - Start/Pause/Cancel Button
12 - Auxiliary Function Buttons
13 - Time Delaying Button (+/-)
14 - Spin Speed Adjustment Button
Program cycle selection
Select the appropriate program cycle
from the wash cycle table according to
wash temperature, fabric type, amount
and degree of soiling of the laundry.
Select the desired program with the
cycle selector knob.
C Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature when
choosing a program.
C For further program cycle details, see,
“Program Cycle Selection Table”
Turning the washer on
Prepare the washer for program
selection by pressing the “Power”
button. When “Power” button is
pressed, “Ready” light flashes indicating
that the door is ready to be opened.
Press the “Power” button again to turn
off the washer.
C Pressing the “Power” button does not
necessarily mean the wash cycle has
started. Press “Start/Pause/Cancel”
button to allow the washer start the
cycle.
Download from Www.Somanuals.com. All Manuals Search And Download.
19 EN
Program Cycle Selection Table
White and colorfast
items made of
cotton and linen
Sanitary (baby clothes,
garments, sheets,
163F /
73°C
Heavy
Hot
1200 Full
•
R, S, Q 77
pillowcases, kitchen
towels, tablecloths)
Cottons/
Regularwash
Temp
Boost
145F /
63°C
122F /
50°C
Heavy
Hot
Hot
1200 Full
1200 Full
•
•
•
•
•
•
R, S, Q 67
R, S, Q 61
R, S, Q 59
R, S, Q 54
R, S, Q 52
R, S, Q 52
White and colorfast
Normal/
Heavy
items made of
Hot
cotton and linen
(towels, jeans,
T-shirts, sweatshirts,
Hot-
cold
Warm
Light
Light
95F/ 35°C 1200 Full
work clothes)
60F /
Cold
Cold
Hot
1200 Full
15°C
Easy-care items
Hot
Normal/
Heavy
122F /
800 Half
50°C
made of cotton,
linen, synthetics or
Hot-
cold
Permanent
Press
Warm
Cold
Light
Light
Light
95F/ 35°C 800 Half
blends (dress shirts/
pants, wrinkle-free
items, poly/cotton
blends)
60F /
Cold
800 Half
15°C
•
R, S, Q 52
R, S 36
Delicate easy-care
and wrinkle-free
items made of
cotton, linen,
Hot-
cold
One-
95F/ 35°C 600
third
Warm
x
Delicates
synthetics or
60F /
15°C
One-
third
blends (dress shirts,
blouses, curtains,
sheer or lacy
Cold
Light
Cold
600
x
R, S 31
garments)
Hand washable
items made of
synthetics, wool
and silk (bras,
special care
garments, lingerie)
Machine washable
wool items
One-
third
Warm
Cold
Light
Light
Light
Cold 86F/ 30°C 600
60F /
x
x
x
R, S 32
R, S 29
R, S 41
Hand Wash
Wools
One-
third
Cold
600
15°C
One-
third
Cold 95F/ 35°C 600
Soak
Spin
Any
Any
Any
Heavy Cold 95F/ 35°C 600 Full
x
-
-
-
-
-
100
10
2
-
-
-
-
-
-
1200 Full
Full
Drain
-
Download from Www.Somanuals.com. All Manuals Search And Download.
20 EN
Selectable options of a wash cycle are
extra rinse “R”, superwash “S” and
quickwash “Q”.
• Permanent Press
You can wash your easy care items on
this cycle. Washes with gentler tumbling
movements and in shorter washing
1. Even if there is no hot water system,
hot water inlet must still be connected cycles. It is recommended for your
to another cold water faucet.
Otherwise a fault will occur on water
intake.
cotton,synthetic or blended items (such
as shirts, pants, wrinkle-free items,
etc.). You can select wash temperature
according to the soiling level and/or care
label of items.
2. Programs are limited with the
maximum spin speed appropriate for
that particular type of load.
•Delicates
3. Maximum load capacities are
suggested for various load types.
Wash cycles of full load (cottons/
regularwash, permanent press)
should be half loaded for good wash
results if the laundry is heavily soiled.
Half loading would also minimize
wrinkling of the load.
4. Bleach may only be used in Regular/
Cotton and Permanent Press cycles.
Don’t use bleach with delicates,
handwashables or wools, it will lead
to clothes damage.
You can wash your delicate easy-care
and wrinkle-free items on this program. It
has more sensitive tumbling movements
and does not do intermediate spinning
compared to the permanent program.
It must be used for cotton,synthetic
or blended clothes for which sensitive
washing is recommended.
•Wools
You can wash your machine-washable
wool items on this program. It is
recommended to use appropriate
detergents and laundry additives for
wools.
5. Water and power consumption
and cycle duration may differ from
the table values due to changes in
water pressure, water hardness and
temperature, ambient temperature,
• Hand Wash
You can wash your woolen/delicate
clothes that bear “not machine-
washable” labels for which hand wash
type and amount of laundry, selection is recommended on this program. It
of available options, and changes
in electric voltage. Load unbalance
washes the laundry with very tender
washing movements without damaging
detection or excess foaming may also your clothes.
extend the wash cycle.
Each of these main programs comprise
of a complete washing process,
including washing, rinsing and, if
required, spin cycles.
Wash Cycles
Depending on the type of fabric, the
following main programs are available:
•Cottons/Regularwash
C Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature when
choosing a program.
C Always select the lowest required
temperature. Higher temperature
means higher power consumption.
C For further program details, see,
“Program Selection Table”
You can wash your durable white and
colorfast items with this cycle. Washes
with vigorous tumbling movements in a
longer washing cycle. It is recommended
for your cotton or linen items (such
as bed sheets, pillowcases, jeans,
towels, bathrobes, garments, T-shirts,
sweat-shirts , etc.). You can select
wash temperature according to the
soiling level and/or care label of tems.
“Sanitary” should be chosen for items
that need extra hygiene such as baby
clothes, kitchen towels and garments.
Special programs
For specific applications, you can select
any of the following programs:
• Soak
This wash cycle is used for heavily soiled
Download from Www.Somanuals.com. All Manuals Search And Download.
21 EN
items when you want to pre-treat them.
Cycle soaks the laundry in a relatively
high amount of warm water for two
hours approximately. You can use full
load and HE “High efficiency” main
wash detergent for this cycle. Use half
of the recommended detergent dose
for the load amount to be soaked. This
Auxiliary function selection
You should not select Quickwash
and Superwash at the same time.
Superwash will be cancelled and
Quickwash will remain active in such a
case.
Auxiliary function that is not compatible
with the program cycle cannot be
program ends with a 600rpm spin cycle. selected.(see “Cycle Selection Table”).
• Spin/Drain
“Drain” is used to discharge the water
without spinning the clothes. “Spin” is
used to spin dry the load with selected
spin speed. Spin and Drain may be
selected as two individual program
cycles in this model.
Quick wash
This function can be used for Cotton/
Regularwash and Permanent Press
programs. It decreases the washing
times for lightly soiled items.
C You should select a lower spin speed
for delicate wash items.
Super wash
This function can be used for all wash
cycles except for “Soak”. It increases
washing times for heavily soiled items
for good wash results. This function
Spin speed selection
Whenever a new program is selected,
the maximum spin speed of the selected also increases the rinse water amount
program is shown on the display if
“spin” button is pressed once.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, no spin option is shown
respectively.
No spin is shown with “” symbol.
C You can use “No spin” function in
order to drain the water without
spinning at the end of the program.
“No spin” selection is available for all
wash cycles.
In order to protect your clothes, your
washer will not spin above 800 rpm on
permanent press cycles and 600 rpm
on delicates, wools and hand wash
cycles.
of Cottons/Regularwash cycle for a
more intense rinse. Washer will only
take in cold water when this option is
chosen.
Extra rinse
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by
the remaining detergent on the clothes
will be decreased.
Time display
The display shows the time remaining
for the program to complete while a
cycle is running. Time is displayed in
hours and minutes as “01:30”.
C Program duration may differ from
the values in the consumption
table subject to the changes in the
water pressure, water hardness and
temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in
the supply voltage.
For Cottons/Regularwash cycles, spin
speed can be adjusted between 800-
1200 rpm (including no spin).
For wools, delicates and hand wash
cycles, spin speed can be adjusted
between No spin - 600 rpm.
For permanent press cycles, spin speed
can be adjusted between No spin - 800
rpm.
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Time delay can be set with steps of one
hour for the first three hours and with
Auxiliary functions (Options)
Auxiliary function selection keys
Select the required auxiliary functions
before starting the program.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 EN
steps of three hours for the remainder
(1, 2, 3, 6, 9, …24).
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will light up
and light of the completed step will turn
off. The indicator that is lit up at the far
right of the series of indicator indicates
the step that is being carried out.
C If the washer is not spinning, the
automatic spin correction system has
been activated due to an excessive
unbalanced distribution of laundry in
the drum.
1. Open the loading door, place
the laundry inside and fill detergent
disperser.
2. Set the washing program, spin speed
and, if required, select the auxiliary
functions.
3. Press “Time Delay” button gradually
to adjust the desired time.
4. Press “Start/Pause/Cancel” button.
The time delay will start to count down.
The “:” in the middle of the displayed
time delay will start flashing.
C More laundry may be loaded during
the time delay period.
5. At the end of countdown process,
“:” will light up continuously, “Ready”
light will go off and the relevant program
follow-up light will come on according to
the selected program.
Changing the selections after
the program has started
Turning the cycle selector knob while
the cycle selector is in a normal flow will
not change the program.
Switching the washer to standby
mode
Changing the delay time
If you want to change the time during
the countdown:
Press “Start/Pause/Cancel” button
momentarily to switch your washer
to the standby mode. “Start/Pause/
Cancel” lamp will start flashing to
indicate that the washer is switched to
standby mode.
1. Press “Start/Pause/Cancel” button.
“:” in the middle of the screen will stop
flashing.
2. Press “Time Delay” button to adjust
the desired time delay.
Selecting or canceling an auxiliary
function in standby mode
3. Press “Start/Pause/Cancel” button.
4. The “:” in the middle of the displayed
time delay will start flashing.
Auxiliary functions can be cancelled or
selected in accordance with the step
the program is at. For example, if your
washer is on the main wash cycle or on
the first rinse cycle, you may select extra
rinse auxiliary function.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press “Start/Pause/Cancel” button.
The “:” in the middle of the displayed
time delay will stop flashing.
2. Press “Time Delay” button to
decrease the time delay. “0:00” will
appear on the display eventually.
3. Press “Start/Pause/Cancel” button to
start the program.
Super wash option may not be selected
on any circumstances once the wash
cycle begins.
Quick wash option may only be selected
when your washer is on the main wash
cycle.
Starting the Program
1. Press “Start/Pause/Cancel” button to
start the program.
2. Program follow-up lamp “wash”
showing the startup of the program will
light up.
C The spin speed which is selected
first will keep on being valid even if
the spin speed adjustment button
is pressed during the wash cycle to
change the spin speed. Press “Start/
Pause/Cancel” button and switch the
Download from Www.Somanuals.com. All Manuals Search And Download.
23 EN
machine to “Pause” mode in order
to change the spin speed. New spin
speed can be selected. Spin speed
selection can be changed until the
end of final rinse cycle.
Ending the program through
canceling
“Start/Pause/Cancel” button is pressed
for 3 seconds to cancel the program.
“Ready” warning lamp flashes during
canceling and “End” will appear on the
display.
Adding/removing laundry in standby
mode
The door can be opened if the water
level and temperature in the drum is
suitable. “Ready” lamp will flash until the
door is allowed to open. “Ready” lamp
will light up continuously when the door
is allowed to open. Laundry may be
added / taken out by opening the door.
“Ready” lamp goes off if the front door is
not allowed to open for safety reasons.
Door lock
The loading door can not be opened yet
due to safety reasons while the “Ready”
lamp is flashing. The loading door can
be opened once the “Ready” lamp
starts lighting up continuously.
Child-proof lock
You can protect the appliance from
being tampered by children by means
of the child-proof lock. In this case, no
change can be made in the running
program.
The washer is switched to child-lock
by pressing Quick wash and Extra
rinse auxiliary function keys for 3 sec.
Quick wash auxiliary function light will
start flashing. “C on” (Child lock is
activated) label appears on the display
for a short time. The same symbol will
also be displayed whenever any button
is pressed while the appliance is child-
locked.
To deactivate the child-proof lock, press
Quick wash and Extra rinse auxiliary
function buttons for 3 sec. “C OFF”
(Child-proof lock is deactivated) symbol
appears on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 EN
6 Quick instructions for daily use
Preparation
2. Open the loading door and put in
1. Turn on both hot and cold water
faucets fully. Check and be sure the
water connection is tight.
more laundry.
3. Close the loading door.
4. Press “Start/Pause/Cancel” button.
Re-spinning the laundry
2. Place the laundry in the drum.
3. Add laundry additives (e.g. detergent, The control system for an unbalanced
fabric softener,bleach).
Starting
load can pause the spinning in cases
when the distribution of the laundry in
the drum is not balanced.
1. Press the “On/Off” button.
2. Select the appropriate wash cycle
and temperature suitable for your
items.
If you want to re-spin the clothes:
1. Rearrange the previously placed
clothes in the drum.
3. If required:
2. Select the spin program.
3. Adjust the spin speed.
– select any auxiliary function,
– adjust the spin speed,
– set the time delay,
After the program is finished
Program indicator lights on the screen
remain lighted up after the program is
finished.
4. Close the loading door.
5. Press “Start/Pause/Cancel” button.
The display shows the time remaining 1. “End” will appear on the screen when
for the program to complete if time
delay is not set.
“ready” lamp lights up in the program
follow-up indicator. Open the loading
door and remove the laundry.
2. Press the “On/Off” button.
3. Turn off the faucets.
4. Check the rubber door seal for any
foreign objects.
5. Leave the door and dispenser drawer
open to dry.
6. Check if the program follow-up
indicator on the screen lights up.
Canceling a program
1. Press and hold the `Start/Pause/
Cancel` button for about 3 seconds;
the “Ready” light will start flashing.
2. The machine can drain all the water
or can take in water for 3 times at
most to cool down the clothes and
complete draining process.
Adding more laundry
• This is only possible under the
following conditions:
1. during time delay,
C You may add or remove laundry
during the time delay (until the
program starts).
2. At the beginning of a washing cycle,
C Machine allows adding more laundry
during a future step only if the water
level is low enough to open the
loading door or if the temperature in
the machine is low
In order to add laundry after the start-up
of the program:
1. Press “Start/Pause/Cancel”
button. Wait for the safety lock to
open. “Ready” lamp will light up
continuously.
Download from Www.Somanuals.com. All Manuals Search And Download.
25 EN
7 User maintenance instructions
AWARNING – Be sure to unplug
the power cable before attempting
maintenance or cleaning of your
appliance to minimize the risk of
electric shock.
Cleaning detergent dispenser
Remove any powder/liquid residue
buildup in the dispenser drawer. To do
this;
abrasive scrubbing agent when cleaning
rubber seal.
Cleaning the drum
Check the wash drum for any foreign
objects after unloading your washer.
Residual metal objects such as pins
and coins may form rust stains on drum
surface and your clothes. Do not use
abrasive materials while cleaning the
inner surface of the drum. Use soapy
water with a damp cloth to wipe the
inner surface, then dry it and leave the
door open to let inside dry properly.
1. Press the dotted point on the siphon
of the softener compartment and
pull towards yourself until the it is
removed from the dispenser.
3 If more than a normal amount of
water and softener/bleach mixture
starts to gather in the dispenser
compartments, dispenser must be
cleaned.
2. Wash the dispenser drawer, liquid
chlorine bleach container and siphon
of softener under running warm
water in a sink etc. Wear protective
gloves or use an appropriate brush
or sponge to avoid touching the
detergent residues in the drawer
when cleaning.
Sanitary cycle with extra rinse option
should be used for monthly cleaning of
drum. To carry out this procedure:
First be sure that the drum is empty.
Add 80ml of liquid chlorine bleach
to the bleach container in the right
compartment of the dispenser.
Select sanitary cycle, close the door
and press “start/pause” button. At the
completion of cycle, leave the door open
for drying of drum interior.
3. Replace the drawer into its housing
after cleaning. Check if the siphon
and container are in their original
locations.
Monthly cleaning of the washer is
necessary for removal of bacteria
and mold residues and prevention of
unwanted odor in wash drum.
Cleaning the door seal
Be sure to check the rubber door seal
after unloading your washer. Pull the seal
back to search for any foreign objects.
Residual metal objects such as pins and
coins may form rust stains on rubber
seal, and cause the seal to leak.
Cleaning the outer cabinet
and control panel
When necessary:
• Wipe the exterior panels of your
washer with soapy water or mild
detergent. Dry it with a soft cloth.
• Use only a soft and damp cloth to
clean the control panel.
Wipe the stained areas with soapy
water using a damp cloth. Then wipe
with a dry cloth properly. Do not use an
Download from Www.Somanuals.com. All Manuals Search And Download.
26 EN
may have to clean it occasionally to
prevent any clogging. Water must be
drained completely to clean the pump
filter.
C Never use a sponge or scrubbing
material. These will damage the
painted and plastic parts.
Cleaning the water inlet
strainers
In addition, water may have to be
drained off completely in the following
cases:
There is a strainer at the end of each
water inlet valve at the back side of
the washer and also at the end of
each water inlet hose where they
are connected to the faucets. These
strainers prevent the foreign substances
and dirt in the water to enter into the
washer. Strainers should be cleaned
from time to time.
• before transporting the appliance
(e.g. when moving )
• when there is a danger of frost
In order to clean the dirty filter and
discharge the water;
1- Disconnect or unplug the washer
from the power supply.
AWARNING - There may be water at
158F (70°C) in the drum. Therefore,
the filter must be cleaned only after
the inside water is cooled down to
avoid hazard of scalding.
• Close the water faucets.
• Remove the nuts of the water inlet
hoses to clean the surfaces of the
2- Open the filter cap. The filter cap
may be composed of one or two pieces
according to the model of your washer.
If it is composed of two pieces, press
the tab on the filter cap downwards and
pull the piece out towards yourself.
strainers on the water inlet valves with
an appropriate brush.
• If the strainers are very dirty, you can
pull them out by means of pliers and
clean them.
• Take out the strainers on the flat ends
of the water inlet hoses together with
the rubber seals and clean thoroughly
under running water.
• Replace the rubber seals and
strainers carefully and tighten the
hose nuts by hand.
If it is composed of one piece, hold it
from both sides and open it by pulling
out.
Cleaning the drain pump filter
Filter system in your washer prevents
solid items such as buttons, coins and
fabric fibers clogging the pump impeller
during discharging of the washing
water. Thus, a good water discharge is
achieved and the pump life is extended.
• If your washer fails to drain the water,
the pump filter may be clogged. You
3- An emergency drain hose is supplied
with your washer.
Do the following as shown in the figure
Download from Www.Somanuals.com. All Manuals Search And Download.
27 EN
below:
To prevent scaling, wash drum
should be cleaned frequently. Do not
use abrasive materials such as metal
wool while cleaning the drum.
• Pull out the emergency drain hose
from its housing.
Take the manufacturer’s instructions
into account if you are using a
descaling agent. Descaling agents
may contain materials that are
hazardous for washer components.
Use descaling agents compatible for
use in clothes washers.
When using a powder descaling
agent, add 1 cup to the main wash
compartment of the dispenser and
run a regular hot cycle (with extra
rinse) without any clothes and
detergents.
• Place a large container at the end of
the hose. Drain the water off into the
container by pulling out the plug at
the end of the hose. If the amount of
water to be drained off is greater than
the volume of the container, replace
the plug, pour the water out, then
resume the draining process.
• After draining process is completed,
replace the plug into the end of the
hose and fit the hose back into its
place.
• When there is no water left, turn the
pump filter until it is completely loose
and remove it.
• Clean any residues inside the filter
as well as fibers, if any, around the
impeller region.
• Never force the filter while replacing it
into its housing. Fit the filter fully into
its housing; otherwise, water may
leak from the filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
into their positions and pushing the
upper part of it.
Descaling the washer
Hard water can cause scale build-
up inside the drum and other parts
of your washer in time. Scaling may
lead to some serious problems such
as clogging in hoses, heater or pump
failure eventually.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 EN
8 Troubleshooting
Problem
Cause
Explanation / Suggestion
There may be some water in your It is not harmful to your washer. You
appliance when you receive it.
This is from the quality control
process and is normal.
should run a “sanitary” cycle without
any clothes and laundry additives
before the first use of your washer.
Water in the washer.
Faucets may be turned off.
Open the water faucets fully.
Check the water inlet hose and
straighten if necessary.
Water inlet hose may be folded.
Water inlet strainers might be
clogged.
Clean the water inlet strainers.
Call an electrician and have the
power outlet / circuit breaker / fuse
checked.
Is there power at the outlet?
Washer might be unplugged.
Drain hose may be folded.
Washer does not fill with
water or wash after the
program was selected
and the “Start/Pause/
Cancel” button was
pressed.
Plug the power cord to a live
electrical outlet.
Check the drain hose and straighten
if necessary.
Washer may be in handwash,
wools or soak cycle.
Wait for a short time and tumbling
will start.
Clean the drain pump filter (See
“User maintenance instructions” ). If
the house drain pipes are clogged,
call a plumber for assistance.
Drain pump filter or drain itself
may be clogged.
Door may not be closed properly. Close the loading door.
Check the drain hose and straighten
if necessary.
Drain hose may be folded.
Washer does not drain
water / Washer drains
water slowly.
Clean the drain pump filter (See
“User maintenance instructions” ). If
the house drain pipes are clogged,
call a plumber for assistance.
Drain pump filter or drain itself
may be clogged.
Connect the drain hose as described
in the user manual (See “Installation
Instructions, Drainage”).
The water being taken in
is directly discharged.
Improper position of the drain
hose.
No water can be seen
in the drum during
washing.
This is not a problem. The water
level is not visible from the
outside of the washer.
Washer stopped shortly
after the program cycle
started.
Washer can stop temporarily due
to low voltage.
It will resume operating when the
voltage is back to the normal level.
Download from Www.Somanuals.com. All Manuals Search And Download.
29 EN
Be sure the strainers and rubber
seals of the water inlet hoses are
solid and securely fitted.
Inlet hose connections may be
leaking.
End of the drain hose may be
loosely inserted into the waste
pipe or sink.
Tightly attach the drain hose to the
waste pipe or sink (See “Installation
Instructions, Drainage”).
There is water coming
from the bottom of the
washer.
If the house drain pipes are clogged,
call a plumber for assistance.
House drain may be clogged.
Filter cap of the drain pump may
not be properly fitted.
Make sure that the pump filter cap is
tightly closed.
Internal hose connections (e.g.
dispenser hoses, drain system)
should be checked by a service
technician.
Hose connections inside the
washer may be leaking.
Washer fills with water
when a process is
cancelled.
There may be hot water inside
washer.
For safety reasons, water should be
cycled in and out a couple times.
Time delay function
does not work.
Door may not be closed properly. Close the loading door.
Water level might be above the
lower level of the door.
Run “Drain” , “Spin” or “Drain&Spin”
program.
Washer might be heating up the
water or it may be at the spinning Wait until the process is over.
cycle.
The door will not open.
The door will not lock.
Due to electrical safety
mechanism, the door can only be
Wait until the process is over.
opened a few minutes after the
program has stopped.
Door is not properly closed/Door
Check for any bulky or large items
hinge is not aligned with lock
obstructing the door to be closed.
switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 EN
The washer will wait until there is a
sufficient amount of water, which
may lengthen the cycle time to
avoid poor washing results due to
insufficient water.
Water pressure may be low.
Supply voltage may be low.
Cycle time is lengthened to avoid
poor washing results when the
supply voltage is low.
Cycle time lengthens to heat up
the water when the inlet water is
cold. Also, washing time can be
lengthened to avoid poor washing
results.
Inlet temperature of water may
be low.
Cycle time takes longer
than the time specified in
the owner’s guide.
The automatic spin correction
system might have been activated
due to the unbalanced distribution of
the laundry in the drum.
There may be an imbalance of
load in the drum.
Use a proper amount of HE
detergent. Reduce the amount of
detergent next time you operate the
washer.
Number of rinse cycles might
have increased to obtain a better
rinse.
In the case of a paused
countdown while taking in water:
Timer will not countdown until
the washer is filled with the
correct amount of water. Time
will not count down until the
selected temperature for the
The washer will wait until there is a
sufficient amount of water to avoid
poor washing results due to lack
of water. Then the timer will start to
count down.
program is reached
In the case of a paused
countdown at the heating step:
Time will not count down until
the selected temperature for the
program cycle is reached.
It continuously washes.
Remaining time does not
count down.
The automatic spin correction
system might have been activated
due to the unbalanced distribution of
the laundry in the drum.
In the case of a paused
The laundry in the drum may be
tangled up too much. Laundry
should be rearranged and re-spun.
countdown at the spinning step:
There may be an imbalance of
laundry in the drum.
No spinning is performed when the
laundry is not evenly distributed in
the drum to prevent any damage to
the appliance and to its environment.
Download from Www.Somanuals.com. All Manuals Search And Download.
31 EN
The automatic spin correction
system might have been activated
due to the unbalanced distribution of
the laundry in the drum.
The laundry in the drum may be
tangled up too much. Laundry
should be rearranged and re-spun.
It continuously spins.
Remaining time does not
count down.
There may be an imbalance of
load in the drum.
No spinning is performed when the
laundry is not evenly distributed in
the drum to prevent any damage to
the appliance and to its environment.
Use the recommended amount of
HE detergent appropriate for water
hardness, soil level and amount of
laundry.
Using excessive amount of
detergent.
Not using HE detergent
Use HE detergent.
Excess foaming occurs.
Detergent may have been stored
improperly.
Store detergent in a cool and dry
place.
Type of material being washed
(lace items will cause excessive
foam due to their meshed
structure).
Reduce the amount of detergent for
lace items.
Push “Start/Pause/Cancel”
button. Mix 2 cups of water
with 1-2 tablespoon of fabric
softener and pour it into
detergent dispenser. Push “Start/
Pause/Cancel” button again.
Use proper amount of HE detergent
next time you operate the washer.
Washer is completely full
of suds/Suds coming
out of dispenser during
operation.
Not using HE detergent / Using
excessive amount of detergent
Do not unload the washer.
Operate a quick wash cycle (e.g.
Delicates, Wools) without any
detergent. Add 1-2 tablespoon
of fabric softener into main
wash compartment of detergent
dispenser during water intake.
Use proper amount of HE detergent
next time you operate the washer.
Load is still too soapy /
Washer is full of suds at
the end of program.
Not using HE detergent / Using
excessive amount of detergent
Unbalance detection due to 1-2
small items in the drum (uneven
load distribution)
Add more laundry (e.g. a few
additional towels) to the drum and
start a “Spin” or “Spin&Drain” cycle.
Load is still too wet at
the end of program.
Poor spinning results due to
not using HE detergent / using
excessive amount of detergent
Use proper amount of HE detergent.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 EN
The automatic spin correction
system might have been activated
due to the unbalanced distribution of
the laundry in the drum. No spinning
is performed when the laundry is
not evenly distributed in the drum
to prevent any damage to the
There may be an imbalance of
load in the drum. Therefore, the
program cycle might have been
completed without spinning.
appliance and to its environment.
The laundry in the drum may be
tangled up too much. Laundry
should be rearranged and re-spun.
Washer did not spin.
Unbalance detection due to 1-2
small items in the drum (uneven
load distribution)
Add more laundry (e.g. a few
additional towels) to the drum and
start a “Spin” or “Spin&Drain” cycle.
Check the drain hose and straighten
if necessary.
Drain hose may be folded.
“No spin” setting may be
adjusted.
See “Spin Speed Selection”.
Clean the drain pump filter (See
“User maintenance instructions” ). If
the house drain pipes are clogged,
call a plumber for assistance.
Drain pump filter or drain itself
may be clogged.
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Using insufficient amount of
detergent.
Select the proper temperature for
the laundry to be washed (See
“Laundry Tips” & “Program Cycle
Selection”).
Washing at low temperatures for
a long time
If the water hardness is high, using
an insufficient amount of detergent
can cause laundry to turn gray over
time.
Using insufficient amount of
detergent for hard water (soil can
stick to the laundry)
Washing performance
is poor: Laundry turns
gray/yellow
Using excessive amount of
detergent (detergent can stick to
the laundry).
It is difficult to eliminate such
grayness once it occurs.
Not using HE detergent
Dyeing problem occurs.
Use HE detergent.
Sort the wash load by color (See
“Laundry Tips”).
Hot water inlet temperature is not Set your water heater for delivering
high enough.
120-140F (48-60 C) hot water.
Select the proper program cycle and
temperature according to the type
and soiling degree of the laundry.
A higher temperature might have
been selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
33 EN
Select the proper program cycle
and temperature for the laundry to
be washed (See “Laundry Tips” &
“Program Cycle Selection”).
Wrong program cycle and
temperature might have been
selected.
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Using insufficient amount of
detergent.
Use liquid detergent for cold wash
cycle for good wash results. Use
proper detergents recommended for
wools, handwashable and delicate
items.
Washing performance is
poor: Stain could not be
removed, not cleaned.
Laundry could not be
whitened.
Using wrong type of detergent.
Mixing different sorts of items.
Sort the laundry according to
care labels and user manual (See
“Laundry Tips”).
Put the detergent in the correct
compartment of dispenser (See
“Detergent Dispenser”).
Mixing different types of laundry
additives.
Do not mix detergent with bleaching
agent or fabric softener.
Excessive laundry may be loaded
into washer.
Do not load the washer in excess.
Oily accumulations of prior wash
cycles on the drum may have
stuck to the laundry.
Washer must be operated empty at
sanitary cycle with detergent.
Washing performance is
poor: Oily stains appear
on laundry.
The detergent may have
Softener should not come into
contact with detergent when being
added.
been placed into the wrong
compartment; the detergent may
be mixed with the softener.
Such odor and bacteria layer
may be formed on the drum as a
result of continuous washing at
lower temperatures and/or in short
programs. Leave the dispenser
drawer as well as the loading door
ajar after each washing. Thus, a
humid environment favorable for
bacteria cannot be created inside
the machine.
Bad odor in the drum
and detergent dispenser.
For monthly cleaning procedure of
the drum, See “Cleaning the Drum”.
Wash and clean the dispenser
with warm water frequently (See
“Cleaning Detergent Dispenser”).
Download from Www.Somanuals.com. All Manuals Search And Download.
34 EN
If the water hardness is higher, using
insufficient amount of detergent can
cause the laundry to become stiff
in time. Use appropriate amount of
detergent according to the water
hardness.
Using insufficient amount of
detergent.
You may have added too much
softener beyond max fill line.
Clothes are stiff and/
or do not smell like the
fabric softener.
The detergent dispenser might be
problematic. Water may be siphoned
(pulling the softener into the washer
early) during the fill or rinse cycles.
Softener being released early.
There might be problems with the
water inlet valves.
The detergent may have
Softener should not come into
contact with detergent / bleach
when being added.
been placed into the wrong
compartment; the detergent may
be mixed with the softener.
Select the proper program and
temperature according to the type
and soiling degree of the laundry
(See “Laundry Tips” & “Program
Cycle Selection”).
A higher temperature might have
been selected.
Do not pour undiluted liquid
bleach onto laundry. Always pour
it into bleach compartment of the
dispenser prior to beginning of the
wash cycle .
Color of the clothes
faded.
Exposure of laundry to undiluted
liquid chlorine bleach.
Do not overfill the bleach
compartment. Fill up to max line at
the most.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Download from Www.Somanuals.com. All Manuals Search And Download.
35 EN
There may be an imbalance of
laundry in the machine. The laundry
in the drum may be tangled up
too much. Laundry should be
rearranged and re-spun. No spinning
is performed when the laundry is
not evenly distributed in the drum
to prevent any damage to the
appliance and to its environment.
Intermediate spins may be
skipped.
The amount and storage
conditions of the detergent used
might not be appropriate.
Store detergents in a cool and dry
place. Do not keep them under high
temperatures.
Rinsing performance is
poor.
Not using HE detergent
Use HE detergent.
Using excessive amount of
detergent
Reduce the amount of detergent.
Check the drain hose and straighten
if necessary.
Drain hose may be folded.
Clean the drain pump filter (See
“User maintenance instructions” ). If
the house drain pipes are clogged,
call a plumber for assistance.
Drain pump filter or drain itself
may be clogged.
Detergent (powder) may have
been put in wet dispenser
drawer.
Dry the dispenser drawer before
putting in powder detergent.
Store detergent in a cool and dry
place. Do not keep them under high
temperatures.
Dilute the softener by pouring some
warm water on it (dilute up to max
fill line).
Detergent (powder) may have
gotten damp.
Detergent or softener
residue in the dispenser/
Too much water
Softener may be too dense or
concentrated.
remains in the softener
compartment.
Water pressure might be low.
Softener/bleach should not come
into contact with detergent when
being added.
Detergent might be mixed with
the bleach/softener.
Adjust the washer feet (See
“Levelling the Washer”).
Feet might require adjustment.
Remove the shipping bolts (See
“Removing Transport/Shipping
Bolts”).
Shipping bolts might not have
been removed.
Add more laundry to the drum for
even load distribution next time you
operate the washer.
There may be a small amount of
laundry in the drum.
Washer vibrates, shakes
or makes too much
noise.
The drum may be overloaded or
the clothes may be distributed
unevenly.
Reduce the amount of laundry in the
drum or balance the load by hand
next time you operate the washer.
The appliance might be touching
a solid surface.
Ensure that nothing touches the
washer.
This is not a problem. Lapping
sound is normal at the end of the
drain operation.
Strange noise in the
drain pump.
It is not harmful to your washer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Stop the program cycle (See
“Cancelling a Program”) ,check the
drum for any foreign objects.
Clanking noise in the
drum.
Metal objects such as coins, pins
may be in the drum.
Disconnect inlet hoses from the
valves. Clean inlet strainers and valve
filters of any debris.
Water inlet hoses or valves may
be clogged.
Run the hot water faucets in the
bathroom or kitchen (whichever is
close to the location of your washer)
for a short time to purge the hot
water line.
Water fill temperature is
incorrect.
There may be a long distance
between the water heater and
washer.
Be sure that your water heater is
delivering hot water min 120F (49C)
at the faucet.
There may be a problem with
water heater.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Select the proper program cycle
and temperature for the laundry to
be washed (See “Laundry Tips” &
“Program Cycle Selection”).
Wrong program cycle and
temperature might have been
selected.
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Using insufficient amount of
detergent.
Detergent residue left on
the laundry.
Using powder or granular
detergents in cold water washing
may leave residue on wash load.
Try to use a liquid detergent when
washing in cold water.
Use liquid detergent for cold wash
cycle for good wash results. Use
proper detergents recommended for
wools, handwashable and delicate
items.
Using wrong type of detergent.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Clothes get tangled up
too much in the drum
when washing.
Washing many items of the same Load the wash drum with items of
type or size of clothes together.
different sizes.
Unload the washer as soon as the
wash cycle ends.
Delay in unloading the washer.
Select the proper program cycle
for the laundry to be washed (See
“Laundry Tips” & “Program Cycle
Selection”).
Wrong program cycle might have
been selected.
Load is wrinkled.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Download from Www.Somanuals.com. All Manuals Search And Download.
9 WARRANTY STATEMENT FOR THE BLOMBERG
CLOTHES WASHERS
The warranties provided by Blomberg in these
statements only apply to Blomberg washers
sold to the original purchaser or homeowner
in the US and Canada. The warranty is not
transferable. To obtain warranty service, please
contact our nearest distributor as listed by
state. You will need your washer model number,
Disclaimers of warranties and exclusions:
Warranty does not cover service costs by an
authorized service agent to correct installation,
electrical and plumbing problems or educational
instruction on the use of the washer. The
warranty also does not cover defects or
damage caused by an act of god (such as
serial number, retailer name and address, where storms, floods, fires, mudslides, etc.), damage
purchased and purchase date / installation
date. This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state.
cause by use of the washer for purposes
other than those for which it was designed,
misuse, abuse, accident, alteration, improper
installation, maintenance, travel fees, service
calls outside normal service hours, unauthorized
service work or work.
1 year * limited warranty from date of first
installation Blomberg will repair or replace at
no cost to the consumer any defective parts
of the washer if used under normal household
conditions (warranty is void if the product
is used commercially e.g., bed + breakfast,
nursing home etc.). Service must also be
performed by an authorized Blomberg service
agency. (Cosmetic defects must be reported
within 10 business days from installation)
TO THE EXTENT PERMITTED BY LAW, THIS
WARRANTY IS IN LIEU OF ALL OTHER
EXPRESSED AND IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. BLOMBERG
UNDERTAKES NO RESPONSIBILITY FOR THE
QUALITY OF THIS PRODUCT EXCEPT AS
OTHERWISE PROVIDED IN THIS WARRANTY
STATEMENT. BLOMBERG ASSUMES NO
RESPONSIBILITY THAT THE PRODUCT WILL
BE FIT FOR ANY PARTICULAR PURPOSE
FOR WHICH YOU MAY BE BUYING THIS
PRODUCT, EXCEPT AS OTHERWISE
2 year * ++ limited warranty from date of first
installation (Parts only) Blomberg will repair or
replace any parts at no cost to the consumer if
material defects
or workmanship have caused the damage
or failure of these components. Again the
appliance must have been used under normal
household conditions and not commercially
as stated above (Labor charges are the
responsibility of the consumer)
PROVIDED IN THIS WARRANTY STATEMENT.
Blomberg does not assume any responsibility
for incidental or consequential damages. Such
damages include, but are not limited to, loss of
profits, loss of savings or revenue, loss of use of
the washer or any associated equipment, cost
of capital, cost of any substitute equipment,
facilities or services, downtime, the claims
of third parties, and injury to property. Some
states do not allow the exclusion or limitation
of incidental or consequential damages, so the
above limitations or exclusion may not apply to
you.
5 year * ++ limited warranty from date of first
installation (parts only 2-5 years) Blomberg will
repair or replace any circuit boards or washer
drum (excluding any plastic attachments) at
no cost to the consumer if material defects
or workmanship have caused the damage
or failure of these components. The washer
must have been used under normal household
conditions and not commercially (Labor charges * installation date shall refer to either purchase
are the responsibility of the consumer)
date or 5 business days after delivery of the
product to the home, whichever is later.
Lifetime limited warranty from date of first
installation * ++ (parts only) Blomberg will repair
or replace to the original owner the stainless
steel drum if rust through occurs under normal
household use and normal water conditions
(no excessive chlorine). Blomberg may, at its
option, also replace the whole washer with the
same and/or equivalent model with equal or
better functionality if the original model is no
longer available. (Labor, removal and installation
charges are the responsibility of the consumer.)
++Parts replaced will assume the identity of the
original parts + their original warranty.
No Other Warranties. This Warranty Statement
is the complete and exclusive warranty from the
manufacturer. No employee of Blomberg or any
other party is authorized to make any warranty
in addition to those made in this Warranty
Statement.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 EN
10 HOW TO GET SERVICE
Please contact the Distributor for your State
or Province as listed on the Distributor
Contact List, or call our Toll Free Number
at 1 800 459 9848 for direction to an
Authorized Blomberg Service Agent.
Download from Www.Somanuals.com. All Manuals Search And Download.
39 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|