Blaupunkt Car Video System IVMS 5601 User Manual

In Car Video  
IVMS-5601  
IVMS-7001  
Operating and installation instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Notes / Accessories .............. 14  
Fitting ..................................... 14  
Prepare the working area .............. 14  
Mark out the dimensions................ 15  
Carefully cut open the headrest  
cover............................................. 15  
Open the headrest and remove  
filling and other items..................... 15  
Lay the cable through the  
headrest ........................................ 16  
Insert the mounting frame in  
the headrest .................................. 16  
Insert the monitor .......................... 16  
Check and adjust the monitor then  
apply the Velcro strips ................... 17  
Removal ................................. 17  
OSD functions........................ 18  
Main menu .................................... 18  
Sub-menu ..................................... 18  
Technical data ........................ 19  
Guarantee .............................. 20  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES / ACCESSORIES  
Important notes  
FITTING/REMOVAL  
Fitting  
This device is not intended for fitting in  
the forward section of the passenger  
compartment where it could also be  
seen by the driver. Fitting this device in  
any part of the vehicle where it could  
interfere with or distract the driver’s at-  
tention is dangerous and is not permit-  
ted. The manufacturer cannot accept  
responsibility for any damage caused  
as a result of improper fitting of this de-  
vice.  
Note  
It is recommended that the fitting is car-  
ried out at a specialist workshop.  
Prepare the working area  
Remove the headrest, and place it  
on a working surface that has been  
cleared and cleaned, where the  
further assembly procedures may  
be carried out.  
Note:  
Take appropriate action to ensure that  
the headrest is not damaged while fit-  
ting the monitor.  
To avoid the risk of electrical  
shock, the device must be protected  
from water and moisture, and must  
not be opened. Dangerously high  
voltages are generated inside the  
device.  
We wish to point out that the right to  
claim against warranty is invalidated by  
any changes or modifications to the  
device that have not been explicitly ap-  
proved by the manufacturer.  
Accessories supplied  
Connecting cable  
Extraction tool  
Operating instructions  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FITTING/REMOVAL  
Mark out the dimensions  
Feel the covering of the headrest  
carefully to ensure that there are  
no invisible parts that would pre-  
vent the monitor from being fitted.  
Use the cardboard template provided  
to mark out the area that will need to be  
cut.  
Open the headrest and remove  
filling and other items  
Carefully lift the covering material  
away from the cut area.  
Adjust the cutting depth of the knife  
to about 2.5 cm, and cut into the  
headrest following a line about  
0.5 cm inside the marked edge.  
Carefully cut open the headrest  
cover  
Use a knife with an adjustable cutting  
depth to cut out the planned area.  
Carefully lift the filling material at  
one corner, and cut deeper into the  
material with the knife.  
Remove the filling material in small  
pieces.  
Make the first cut inside the  
marked area at a point about  
0.5 cm from one of the corners,  
then make a diagonal cut to a point  
about 0.5 cm from the opposite  
corner.  
As you do this, lift one piece of the  
filling material, and ensure that the  
cut is being made to an even  
depth.  
To remove other pieces, use a Dremel  
saw or another suitable tool.  
Make a similar cut between the  
other two diagonally opposed cor-  
ners.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FITTING/REMOVAL  
Insert the monitor to check that it  
will fit into the cut area, and make  
adjustments if necessary.  
Insert the mounting frame in the  
headrest  
Before connecting the monitor,  
pass the connecting cables  
through the holes provided in the  
mounting plate, as shown in the il-  
lustration.  
Insert the mounting plate into the  
area that has been cut out, and fix  
it in place with appropriate fasten-  
ings.  
Lay the cable through the  
headrest  
Now pass the supplied cables  
through the opening so that they  
emerge from the underneath of the  
headrest.  
If possible, cover the cable with a  
cable tunnel.  
Inserting the monitor  
Now connect the power supply,  
ground and video signal cables, to  
check that the monitor is working.  
Before connecting the monitor,  
pass the connecting cables  
through the holes provided in the  
mounting plate, as shown in the il-  
lustration.  
Insert the monitor into the mounting  
plate, and attach it with appropriate  
fastenings.  
Monitor  
Mounting plate  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FITTING/REMOVAL  
Check and adjust the monitor  
then apply the Velcro strips  
Connect the monitor, place it tem-  
porarily in the cut-out, and place  
the headrest into position.  
Removal  
To remove the screen, insert the  
extraction tool between the screen  
and the mounting plate.  
Insert the extraction tool at the  
place where a slot has been pro-  
vided between the screen and the  
mounting plate.  
Check the various monitor settings  
such as brightness, headphone  
function, volume control and so on.  
Then attach the Velcro strips to the  
rear of the monitor, and push the  
frame onto the headrest.  
Take care not to press the screen  
itself, and apply pressure only in  
the region of the frame.  
Extraction tool  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTION  
OSD functions  
Main menu  
Call up the main menu by pressing  
the “MODE” key on the main de-  
vice, or “MENU” on the remote  
control unit.  
Sub-menu  
To reach the following menu op-  
tions, select “MISC” from the main  
menu.  
When in the sub-menu, select the  
“MAIN MENU” option to return to  
the main menu, then select “EXIT”  
to leave the OSD menu.  
Select the “EXIT” option to leave  
the OSD menu again.  
AUTO PROGRAM  
VOLUME  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
FM CHAN: OFF  
AV OUT: LINE  
ZOOM: FULL  
SPEAKER: OFF  
MISC  
REVOLVE: LEFT RIGHT  
REVOLVE: UP DOWN  
RESET PICTURE  
MAIN MENU  
EXIT  
+
VOLUME:  
Note:  
Volume adjustment  
BRIGHTNESS:  
Brightness adjustment  
CONTRAST:  
Contrast adjustment  
COLOR:  
Rotate UP DOWN (off function).  
AUTO PROGRAM :  
See the “AUTO PROGRAM” function  
in the description of the remote control  
unit.  
AV OUT:  
Color adjustment  
TINT:  
Use this option to select between the  
“constant” and “variable” AV output  
modes.  
Screen tint adjustment  
MISC:  
Opens the sub-menu  
EXIT:  
Leave the OSD menu  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTION  
TECHNICAL DATA  
ZOOM :  
Technical data  
This mode is pre-set by default to “full”.  
You can make the various adjustments  
for the display mode that you want by  
System:  
NTSC/PAL dual  
system  
pressing the  
lowing options:  
or  
keys for the fol-  
Power supply / consumption:  
112 V DC  
Full = display a 4:3 signal in a 16:9 im-  
age format  
± 10%, <700 mA  
Standby:  
< 1 mA  
ZOOM1 = picture height, zoom factor =  
4/3  
Video input level: Combined video  
signal 0.7 -  
WIDTH1 = picture height and different  
picture width  
2.0 Vp-p, 75 Ohm  
Normal = edge ratio 4:3  
Audio input level: 0 - 0.3 Vrms,  
10 - 20 kHz  
ZOOM2 = zoom factor = 8/7  
WIDTH = different picture widths  
WIDTH2 = picture height and different  
picture width  
Operating temperature:  
0° C - +60° C  
ZOOM3 = picture height, zoom factor =  
8/7  
Storage temperature:  
-20° C - +70° C  
SPEAKER:  
Choose the “SPEAKER” option, then  
switch the monitor loudspeaker on or  
Screen size (diagonal):  
5.6", 7"  
off with the or  
keys.  
REVOLVE  
Contrast ratio:  
150  
With this function and the and keys  
you can revolve the display on the Electrical power consumption:  
screen.  
< 9 W  
RESET:  
Brightness:  
400 cd/m2  
Select the “RESET PICTURE” option to  
return all the adjusted parameters to  
their factory pre-set values.  
Screen technology:  
TFT (thin film tran-  
MAIN MENU:  
sistor) display sys-  
tem  
If you are in the sub-menu, select this  
option to return to the main menu.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL DATA  
GUARANTEE  
Resolution (pixels):  
Guarantee  
The scope of the guarantee depends  
on the regulations in force within the  
country in which the unit was purchased.  
5.6":  
720 (H) x 234 (W) =  
168,480 pixels  
7":  
1440 (H) x 234 (W)  
= 336,960 pixels  
If your unit develops a fault, please con-  
tact your dealer and present the pur-  
chase receipt.  
Black light:  
cold cathode tube  
If the statutory guarantee period in your  
country is less than 12 months, Blau-  
punkt will grant a 12-month manufac-  
turer’s guarantee. This guarantee does  
not cover damage due to wear, incor-  
rect usage or commercial use.  
Visible screen area:  
155.52 (W) x  
87.75 (H) mm  
Angle of view:  
5.6":  
from left and right:  
45°,  
from above: 10°,  
from below: 30°  
If you wish to enforce a claim under the  
manufacturer’s guarantee that is provid-  
ed by Blaupunkt, please send the faulty  
equipment together with the purchase  
receipt to the Blaupunkt customer serv-  
ice centre in your country. You can find  
out which address is closest to you by  
contacting the telephone hotline listed  
on the back page of this booklet. Blau-  
punkt retains the right to rectify defects  
or supply a replacement.  
7":  
from left and right:  
60°,  
from above: 60°,  
from below: 30°  
Full monitor dimensions:  
5.6":  
140 (W) x 114 (H) x  
42 (D) mm  
7":  
200 (W) x 127 (H) x  
33,5 (D) mm  
Monitor weight: < 500 g  
Subject to changes!  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service-Nummern / Service numbers / Numéros du service après-  
vente / Numeri del servizio di assistenza / Servicenummers /  
Telefonnummer för service / Números de servicio / Números de  
serviço / Servicenumre  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
01-576 9473  
01-4598830  
02-369 6464  
40 2085  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0800-550 6550  
(IRL) 01-4149400  
(I)  
02-369 6331  
40 4078  
Luxembourg (L)  
Netherland  
Norway  
Portugal  
Spain  
(NL)  
023-565 6348  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
(N)  
(P)  
(E)  
(S)  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ)  
02-6130 0441  
01-333 9575  
0800-118922  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
Poland  
(PL)  
Turkey  
USA  
(TR)  
0212-3350677  
0212-3460040  
708-6817188  
(USA) 800-2662528  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
09/01  
CM/PSS2 - 8 622 403 143  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bertazzoni Food Warmer P34 5 00 X User Manual
Blackberry Headphones BlackBerry User Manual
Black Box Switch KV1108A User Manual
Black Decker Blender BL2020R User Manual
Black Decker Coffeemaker DCM310 User Manual
Blue Rhino Insect Control Equipment SV3000 User Manual
Bostitch Staple Gun EHF1838K User Manual
Broilmaster Gas Grill AND P48 User Manual
Candy Washer CE 104 1 User Manual
Celestron Telescope 21052 User Manual