Radio / CD
Sevilla CD51
Wiesbaden CD51
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
1
button - unlatches the flip/
release panel
9
button - opens the flip/release
panel
2
3
Volume control
Button - switches the radio and
mute function on/off
RDS button - switches RDS con-
venience function on/off (radio
data system).
Selects variable radio texts.
BND button (band), source se-
lection for radio mode,
selection of FM memory levels
and the wavebands MW and LW
(Wiesbaden CD51 does not fea-
ture MW and LW)
TS, starts the Travelstore func-
tion.
:
;
Arrow-key block
OK button - confirms menu en-
tries and starts the scan function
EQ button (digital equalizer) -
switches the equalizer on/off
AUD button (Audio) - adjusts
bass and treble, balance and
fader
LD - switches loudness function
on/off (volume adjustment to
comfortable hearing level)
Key block 1 - 6
TRAF button, switches traffic in-
formation standby on/off
CD•C button - selects between
CD, CD changer (if connected)
and AUX sources
4
<
=
5
>
?
@
6
7
Display (display field)
button - indicates the time on
the display
DIS, change display contents
8
MENU button - selects the menu
for basic settings
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Interrupting play (PAUSE).............. 42
Changing the display ..................... 42
Traffic announcements in
CD mode ...................................... 42
Removing a CD ............................. 42
Notes and Notes and
accessories ............................ 30
Road safety ................................... 30
Installation ..................................... 30
Accessories .................................. 30
International telephone
CD changer mode.................. 43
Starting CD changer mode............ 43
Selecting a CD.............................. 43
Selecting a track ........................... 43
Fast track selection ....................... 43
Fast search (audible) ..................... 43
Changing the display ..................... 43
Repeating individual tracks or
whole CDs (REPEAT).................... 43
Random play (MIX) ........................ 44
Scanning all tracks on all CDs
(SCAN) ......................................... 44
Interrupting Play (PAUSE) ............. 44
information .................................... 30
Flip/release panel .................. 31
Switching on/off .................... 32
Volume adjustment ................ 33
Radio mode............................ 35
Switching to radio mode ................ 35
RDS function (AF, REG) ................ 35
Selecting the waveband/memory ... 35
Tuning into a station....................... 36
Setting the sensitivity of the
station search mode ...................... 36
Storing stations ............................. 36 CLOCK - Time ........................ 45
Storing stations automatically
(Travelstore) .................................. 37
Listening to preset stations ............ 37
Scanning receivable stations
(SCAN) ......................................... 37
Setting the scanning time .............. 37
Programme type (PTY) .................. 37
Optimising radio reception............. 39
Selecting radio text display ............ 39
Setting the display ......................... 39
Tone and volume balance ...... 46
Switching loudness on/off..... 47
Equalizer ................................ 47
Notes on adjusting the equalizer .... 47
Switching the equalizer on/off ........ 48
Setting the equalizer ...................... 48
Setting the level indicator............... 48
Setting aid for the equalizer ........... 49
External audio sources .......... 50
Technical data ........................ 50
Guarantee .............................. 51
Installation instructions........ 196
Traffic information .................. 40
CD Mode ................................ 41
Starting CD mode ......................... 41
Selecting a track ........................... 41
Fast track selection ....................... 41
Fast search (audible) ..................... 41
Random play (MIX) ........................ 41
Scanning tracks (SCAN) ............... 42
Repeating a track (REPEAT) .......... 42
29
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES AND ACCESSORIES
Thank you for deciding in favour of a
Blaupunkt product.We wish you a great
deal of pleasure with your new car ra-
dio.
Accessories
Please use only Blaupunkt-approved
accessories.
Before using your car radio, please read Remote controls
these instructions carefully. The Blau-
The most important functions can be
punkt editors are constantly working to
make our instruction manuals as clear
and easy to understand as possible.
Should you nonetheless have any ques-
tions about how to operate your new car
radio, please contact your specialist
dealer or call the telephone hotline for
your country, the number of which is giv-
en on the back page of this manual.
selected safely from the steering wheel
using the optional remote controls RC
08 and RC 10.
Amplifiers
All Blaupunkt amplifiers are suitable for
use with the radio.
CD changer
The following Blaupunkt CD changers
can be connected to the radio: CDC
A 06, CDC A 08, CDC A 072 and IDC
A 09.
The CD changers CDC A 5 and CDC
A 071 can also be connected if you use
an adapter cable (Blaupunkt no.: 7 607
889 093).
Road safety
Road safety has priority.Only op-
erate your car radio if road and traf-
fic conditions allow.Familiarise your-
self with the unit before setting off on
your journey.
You should always be able to hear
police, fire and ambulance sirens in
good time. For this reason, set the
volume of your car radio at a suita-
ble level.
International telephone
information
Should you have any questions about
how to use the car radio or require any
further information, please call us!
The telephone information service num-
bers are printed on the last page of this
manual.
Installation
If you would like to install your car radio
yourself, please read the installation and
connection instructions at the end of the
manual.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
FLIP/RELEASE PANEL
G First pull the flip/release panel
straight and then to the left out of
the unit.
Flip/release panel
Theft protection
Your car radio is fitted with a flip/release
panel to guard against theft. Without this
panel, the unit is worthless to the thief.
Protect your unit from theft by taking the
flip/release panel with you every time
you leave the car.Do not leave the panel
behind in the car, even if it is out of sight.
The constructive design of the panel
makes for simple handling.
G After removing the flip/release pan-
el, the unit switches itself off.
G All the current settings are saved.
G If there is a CD in the unit, it re-
mains there.
Attaching the flip/release panel
G Slide the flip/release panel from left
to right into the unit guide.
Note:
G Press the left side of the panel into
G Do not drop the flip/release panel.
the unit until it slots into place.
G Do not expose the flip/release pan-
el to direct sunshine or other sourc-
es of heat.
G Keep the flip/release panel in the
case provided.
G Avoid direct skin contact with the
flip/release panel. Please clean it
when necessary with some white
spirit on a lint-free cloth.
Note:
G Do not press against the display
while attaching the flip/release pan-
el.
Removing the flip/release panel
1
If the car radio was switched on when
the flip/release panel was removed, it
comes on again automatically as last
set (radio, CD, CD changer or AUX)
when the panel is replaced.
G Press the
button 1.
This unlatches the flip/release panel.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING ON/OFF
Switching on/off
There are various ways of switching the
car radio on and off, as described be-
low.
Switching on by inserting a CD
If there is no CD in the CD compart-
ment when the car radio is switched off,
G press the
button 9.
This flip/release panel then opens.
Switching on/off using the ignition
If the car radio is correctly connected to G Without exerting any force, slide
the ignition and has not been switched
off using the button 3, it is switched
on/off simultaneously with the ignition.
the CD into the compartment, print-
ed side uppermost, until you feel
some resistance.
You can also switch on your car radio
when the vehicle ignition is off.
The CD is automatically drawn into the
drive.
Do not hinder or assist the drive as it
draws the CD in.
G To do so, press the button 3.
Note:
G Press the flip/release panel gently
G To protect the vehicle battery, the
unit switches off automatically after
one hour.
until you feel it slot into place.
The car radio switches itself on and CD
playback begins.
Switching on/off using the flip/
release panel
G Remove the flip/release panel.
The unit switches itself off.
G Replace the flip/release panel once
more.
The car radio is switched on. The last
settings (radio, CD, CD changer or AUX)
are activated.
Switching on/off using the button
3
G To switch the unit on, press the but-
ton 3.
G To switch the unit off, hold the but-
ton 3 down for more than two
seconds.
The car radio is now switched off.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
VOLUME ADJUSTMENT
Mute setting
Volume adjustment
This feature enables you to lower the
system volume instantaneously (mute).
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
G Briefly press button 3.
G To raise the system volume, turn
the volume control 2 to the right.
“MUTE” appears on the display.
G To lower the system volume, turn
the volume control 2 to the left.
Activating the mute setting
The unit's mute level is adjustable.
G Press the MENU button 8.
Setting the switch-on volume
You can set the volume at which you
wish the car radio to play when switched
on.
G Press the or button : re-
peatedly until “MUTE LEVEL” ap-
pears on the display.
G Press the MENU button 8.
G Use the
mute level.
buttons : to set the
G Press the or button : re-
peatedly until “ON VOLUME” ap-
pears on the display.
G When you have completed the set-
ting, press either the MENU button
8 or OK ;.
G Use the
buttons : to set the
switch-on volume.
Mute during telephone
operation
If you select the “0” setting, the volume
played before the unit was last switched
off will be reactivated.
If your car audio system has been
equipped with a mobile telephone, it will
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
If a traffic announcement is received
while the phone is in use and traffic in-
formation priority has been activated,
you will hear the traffic announcement.
For more information, refer to the sec-
tion on “Traffic information reception”.
The car audio system will be muted to
the mute level selected.
Risk of serious injury! If the
switch-on volume is set at the maxi-
mum, the volume can be very high
when you switch on your car radio.
If the volume was set on maximum
before the unit was last switched off
and the switch-on volume is set at
“0”, the volume can be very high
when you switch on your car radio.
This may damage your hearing!
G When you have completed setting
the volume, press either the MENU
button 8 or OK ;.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VOLUME ADJUSTMENT
Setting the volume for the
confirmation tone
If you hold down a button for longer than
two seconds when using certain func-
tions, e.g. storing a station on a station
button, a confirmation tone (beep)
sounds.The volume of this beep is ad-
justable.
G Press the MENU button 8.
G Press the or button : re-
peatedly until “BEEP” appears on
the display.
G Adjust the volume using the and
buttons :. “0” means the beep
is off, “9” means maximum beep
volume.
G When you have completed the set-
ting, press either the MENU button
8 or OK ;.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Switching REG function on/off
Radio mode
To use the RDS functions AF and REG,
This unit is equipped with an RDS radio
receiver.Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
G press the MENU button 8.
G Press the or button : re-
peatedly until “REG” appears on
the display. “OFF” or “ON” will be
displayed alongside “REG”.
The station name appears on the dis-
play as soon as it is received.
G To switch REG on or off, press the
or button :.
Switching to radio mode
If you are in CD, CD changer or AUX
mode:
G Press the MENU button 8 or OK
;.
Switching the RDS convenience
function on/off
G press the BND/TS button 5 re-
peatedly until “RADIO” appears on
the display.
G To use the RDS functions AF and
REG, press the RDS button 4.
RDS function (AF, REG)
The RDS convenience functions are
active when RDS lights up on the dis-
play with a symbol. When the RDS con-
venience functions are activated, “REG
ON” or “REG OFF” appears briefly on
the display.
The RDS functions AF (Alternative Fre-
quency) and REG (Regional) extend
your radio's range of functions.
G AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
Selecting the waveband/
memory
G REG: Some radio stations set
aside some of their broadcasting
time for regional programmes that
provide different regional content.
With the REG function, your car ra-
dio is prevented from switching to
alternative frequencies with a dif-
ferent regional content.
This unit can receive programmes
broadcast over the FM as well as MW
and LW (AM) waveband (Wiesbaden
CD51 only receives FM). There are
three preset memory levels for the FM
range and one each for the MW and
LW ranges (only FM1, FM2 and FMT
for Wiesbaden CD51).
Note:
Six stations can be stored on each
memory level.
G REG has to be specially activated/
deactivated in the unit's menu.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
G In order to switch between memory Setting the sensitivity of the
levels or wavebands, briefly press
the BND/TS button 5.
station search mode
You can choose whether you wish to
preset only strong or also poor-recep-
tion stations.
Tuning into a station
There are various methods available for
tuning into a station.
G Press the MENU button 8.
G Press the or button : re-
peatedly until “SENS” appears on
the display.
Automatic station search mode
G Press the or button :.
The unit tunes into the next receivable
station.
G Press the button :.
The display shows the currently set val-
ue for sensitivity. “SENS HI6” denotes
maximum sensitivity.“SENS LO1”is the
minimum. If “SENS LO” is selected, “lo”
appears on the display.
Tuning into stations manually
You can also tune into stations manual-
ly.
G Press either the or buttons :.
G Use the
buttons : to set the
desired degree of sensitivity.
Note:
G You can only tune into stations
manually if the RDS function has
first been deactivated.
G When you have completed the set-
tings, press the MENU button 8
or the OK buttons ;.
Browsing through broadcasting
networks (only FM)
Storing stations
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
Storing stations manually
G Select the required FM memory
level, FM1, FM2, FMT or either
waveband MW or LW (Wiesbaden
CD51 does not feature MW and
LW).
G Press the or button : to
move to the next station on the
broadcasting network.
G Tune into the desired station.
Note:
G Hold down one of the preset sta-
tion buttons 1 - 6 > on which you
wish to store the station for more
than two seconds.
G If you want to use this feature, the
RDS function must first be activat-
ed.
You will then only be able to switch to
stations that you have received once
already.To do so, use the Scan or Trav-
elstore function.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Ending SCAN, continuing to listen
to a station
Storing stations automatically
(Travelstore)
G Press the OK button ;.
The scanning process is completed, the
station last scanned remains active.
You can store the six stations with the
strongest reception in the region auto-
matically (only FM). The stations are
stored in the FMT memory.
Setting the scanning time
Note:
G Press the MENU button 8.
G Stations that were previously
stored in this memory are deleted
in the process.
G Press the or button : re-
peatedly until “SCANTIME” ap-
pears on the display.
G Hold down the BND / TS button 5
for more than two seconds.
G Use the
buttons : to set the
desired scanning time.
The automatic station-storing procedure
begins. “TRAVEL-STORE” appears on
the display. Once the process is com-
pleted, the station stored in FMT mem-
ory location 1 is played.
G Once the setting has been com-
pleted, press the MENU button 8
or OK ;.
Note:
Listening to preset stations
G The set scanning time also applies
to scanning in the CD and CD
changer mode.
G Select the memory or frequency
range.
G Hold down the preset station but-
ton 1 - 6 > of the desired station.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme they are
broadcasting. This information can be
received and displayed by your car ra-
dio.
Scanning receivable stations
(SCAN)
You can briefly listen in to all receivable
stations. The scanning time can be set
in the menu at between 5 and 30 sec-
onds.
For example, the programme types can
be:
Starting SCAN
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
G Hold down the OK button ; for
more than two seconds.
CLASSICS
The scanning process begins. “SCAN”
appears briefly on the display, followed
by the current station name or frequen-
cy, which flashes.
You can use the PTY function to select
stations of a particular programme type.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
PTY-EON
Selecting programme type and
starting a search
When the programme type has been
selected and the search started, the car
radio switches from the current station
to a station featuring the selected pro-
gramme type.
G Press the or button :.
The current programme type appears
on the display.
G If you would like to select a differ-
ent programme type, you can
change to another programme time
within the time the programme is
displayed by pressing the or
button :.
Note:
G If no station with the selected pro-
gramme type is located, a beep
sounds and “NO PTY” appears
briefly on the display. The unit
tunes into the station last received
once again.
Or
G Press one of the buttons 1 - 6 >
to select the programme type
stored on that particular button.
G If the set station or another station
in the broadcasting network trans-
mits the selected programme type
at a later time, the car radio auto-
matically switches from the current
station - or from CD or CD changer
mode - to the station featuring the
desired programme type.
The selected programme type will ap-
pear briefly on the display.
G Press the or button : to
start the search.
The next station corresponding to your
selected programme type will be tuned
into.
Switching PTY on/off
G Press the MENU button 8.
Storing the programme type on the
station buttons
G Press the or button : re-
peatedly until “PTY ON” or “PTY
OFF” appears on the display.
G Use the or button : to select
a programme type.
G Press the or button : to
switch PTY on (ON) or off (OFF).
G Hold down the desired station but-
ton 1 - 6 > for more than two sec-
onds.
When PTY is activated, PTY lights up
on the display.
The programme type is now stored on
the selected station button 1 - 6 >.
G Press the MENU button 8 or OK
;.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Optimising radio reception
Selecting radio text display
Some radio stations use the RDS sig-
nal to broadcast advertising or other in-
formation instead of their station name.
Such “radio texts” appear on the dis-
play. You can either allow or block the
display of radio text.
High-frequency cut-off feature
(HICUT)
The HiCut function improves the sound
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced and thus also the
interference level.
G Press the RDS button 4 until
“NAME FIX” appears on the dis-
play.
Switching HiCut on/off
G Press the MENU button 8.
G In order to reactivate the display of
“radio texts”, hold down the RDS
button 4 until “NAME VAR” ap-
pears on the display.
G Press the or button :
repeatedly until “HICUT” appears
on the display.
G Use the or button : to select
Setting the display
HICUT.
In radio mode you can choose between
the continuous display of the time or the
continuous display of the station name/
frequency.
“HICUT 0” denotes no treble reduction,
“HICUT 1” the greatest automatic reduc-
tion of the treble and the interference
level.
G Hold down the
/ DIS button 7
until the desired feature appears on
G Press the MENU button 8 or
OK ;.
the display.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
TRAFFIC INFORMATION
Traffic information
Your car radio is equipped with an RDS-
EON reception system. EON stands for
Enhanced Other Network.
Setting the traffic
announcement volume
G Press the MENU button 8.
G Press the or button : re-
peatedly until “TA VOLUME” ap-
pears on the display.
When a traffic announcement (TA) is
broadcast, your unit will automatically
switch, within a broadcasting network,
from a station which does not transmit
traffic information to one that does.
G Use the or button : to set the
desired volume.
G Once the setting is completed,
press the MENU button 8 or OK
;.
The unit reverts to the programme pre-
viously listened to when the traffic an-
nouncement is over.
Note:
Switching traffic information
priority on/off
G You can also adjust the volume
during a traffic announcement for
its duration by using the volume
control 2.
G Press the TRAF button ?.
Priority for traffic announcements is ac-
tivated when the traffic-jam symbol lights
up on the display.
Note:
G You can also adjust the tone and
volume balance for traffic an-
nouncements. Please see the
“Tone and Volume Balance” sec-
tion.
Note:
You will hear a warning tone,
G if you leave the reception area of a
traffic information station to which
you are currently tuned in;
G if you leave the reception area of a
traffic information station when you
are listening to a CD and the sub-
sequent automatic search cannot
locate a new traffic information sta-
tion;
G if you retune the radio from a traffic
information station to one that does
not broadcast traffic information.
Either deactivate the priority for traffic
information or switch to a station which
broadcasts traffic information.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
Selecting a track
CD Mode
You can use this unit to play standard G Press one of the buttons on the ar-
CDs with a diameter of 12cm.
row block : to select the next or
previous track.
Risk of damage to CD drive!
Single CDs with a diameter of 8 cm
and CDs which are not circular
(“shape CDs”) should not be used.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
If the or button : is pressed once,
the current track is played again from
the beginning.
Fast track selection
For fast track selection backwards or
forwards:
G hold down either the or button
: until fast track selection back-
wards or forwards begins.
Starting CD mode
G If there is no CD in the drive,
G Press the
The flip/release panel opens.
button 9.
Fast search (audible)
For a fast search backwards or forwards
G Gently insert the CD into the CD
compartment with the printed side
uppermost until you feel some re-
sistance.
G keep the
buttons : pressed
until the fast search backwards or
forwards begins.
Random play (MIX)
The CD will be drawn into the drive au-
tomatically.
Do not hinder or assist the drive as it
draws the CD in.
G Press the button 5 MIX >.
“MIX CD”appears briefly on the display,
the MIX symbol lights up.The next track
played will be randomly selected.
G Close the panel using light pres-
sure until you feel it latch into place.
Stopping MIX
CD playback begins.
G Press the button 5 MIX > once
G If there is already a CD in the drive,
again.
G press the CD•C button @ repeat-
edly until “CD” appears on the dis-
play.
“MIX OFF” appears briefly on the dis-
play, the MIX symbol goes out.
Playback begins from the point at which
it was last interrupted.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
Ending Pause
Scanning tracks (SCAN)
You can briefly listen in to all the tracks G Press the button 3 > during the
on a CD.
pause.
Play then resumes.
G Hold down the OK button ; for
more than two seconds. The next
track starts to play.
Changing the display
G To alter the display between track
Note:
number and time or track number
G The scanning time is adjustable.
Read about setting the scanning
time in the section “Setting the
scanning time” in the chapter “Ra-
dio mode”.
and playing time, press the
/
DIS 7 button once or several
times for more than two seconds
until the desired elements appear
on the display.
Stopping SCAN and continuing
playback
Traffic announcements in CD
mode
G Press the OK button ; to end
G If you want to receive traffic an-
nouncements whilst listening to a
CD, press the TRAF ? button.
scanning.
The current track will then continue to
play.
Traffic announcement priority is active
when the traffic-jam symbol lights up on
the display.Please see the chapter“Traf-
fic information”.
Repeating a track (REPEAT)
G If you would like to repeat a track,
press button 4 RPT >.
Removing a CD
“REPEATTRCK”appears briefly on the
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
G Press the
button 9.
The flip/release panel opens to the front
and the CD is ejected.
Stopping REPEAT
G Carefully remove the CD and close
G If you would like to end repeat,
press the button 4 RPT > once
again.
the flip/release panel.
“REPEAT OFF” appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.
Interrupting play (PAUSE)
G Press the button 3 >.
“PAUSE” appears on the display.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
Fast search (audible)
CD changer mode
For a fast search backwards or forwards
Note:
G Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions accompanying
your CD changer.
G keep the buttons : pressed
until the fast search backwards or
forwards begins.
Changing the display
G To alter the display between track
number and playing time or track
number and time or track number
Starting CD changer mode
G Press the CD•C button @ repeat-
edly until “CHANGER” appears on
the display.
and CD number, press the
7 button once or several times for
more than two seconds until the
desired elements appear on the
display.
/ DIS
Playback begins with the first CD the
CD changer recognises.
Selecting a CD
Repeating individual tracks or
whole CDs (REPEAT)
G To change up or down to a different
CD, press the or button :
once or several times.
G To repeat the current track, press
the button 4 RPT > briefly.
Selecting a track
“REPEATTRCK”appears briefly on the
G To move up/down from one track to
another on the current CD,
press the or button : once or
several times.
display and RPT lights up.
G To repeat play of the entire CD,
press the button 4 RPT > once
again.
Fast track selection
For fast track selection backwards or
forwards:
“REPEAT DISC” appears briefly on the
display and RPT lights up.
Stopping REPEAT
G hold down either the or button
: until fast track selection back-
wards or forwards begins.
G To stop the repeat function for the
current track or CD,
press the button 4 RPT > repeat-
edly until “REPEAT OFF” appears
briefly on the display and RPT
goes out.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
Stopping SCAN
Random play (MIX)
G To stop scanning, press the OK
button ; briefly.
G To play the tracks on the current
CD in random order, press the but-
ton 5 MIX >.
The track currently being scanned then
continues play.
“MIX CD” appears briefly on the display
and MIX lights up.
Note:
G You can set the scanning time as
required. Please see the section
“Setting the scanning time” in the
“Radio mode” chapter.
G To play the tracks of all the inserted
CDs in random order, press the
button 5 MIX > once again.
“MIX ALL” appears briefly on the dis-
play and MIX lights up.
Interrupting Play (PAUSE)
G Press the button 3 >.
“PAUSE” appears on the display.
Note:
G In the case of CD changers CDC
A 08 and IDC A 09, all CDs in the
changer are randomly selected. All
other changers first play all the
tracks on a CD in random selection
before moving to the next CD in
the changer.
Ending Pause
G Press the button 3 > during the
pause.
Play then resumes.
Stopping MIX
G Press the button 5 MIX > until
“MIX OFF” appears briefly on the
display and MIX goes out.
Scanning all tracks on all CDs
(SCAN)
G To listen in briefly to all the tracks
on all inserted CDs in ascending
order, hold down the OK button ;
for more than two seconds.
“SCAN” appears on the display.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK - TIME
G Press the
buttons : to switch
between the 12 and 24-hour mode.
CLOCK - Time
Briefly displaying the time
G Press the MENU button 8 or OK
; once you have completed the
setting.
G Press the
/ DIS 7 button briefly
to display the time.
Setting the time
Viewing the time with the car
radio switched off and the
ignition on
Setting the time manually
G To set the time manually, press the
MENU button 8.
G To view the time when the car radio
is switched off and the ignition is
switched on, press the MENU but-
ton 8.
G Press the or button : re-
peatedly until “CLOCKSET” ap-
pears on the display.
“MENU” appears on the display.
G Press the button :.
G Press the or button : re-
peatedly until “CLK DISP OFF” or
“CLK DISP ON” appears on the
display.
The time appears on the display. The
minutes flash and can now be set.
G Set the minutes using the
tons :.
but-
G Press the
button : to switch
between ON and OFF.
G Once the minutes have been set,
press the button :.The hours
now flash.
G Press the MENU button 8 or OK
; once you have completed the
setting.
G Set the hours using the
tons :.
but-
Briefly viewing the time when
the car radio is switched off
In order to view the time when the car
radio is switched off,
G Press the MENU button 8 or OK
; once you have completed the
setting.
Selecting the 12/24-hour clock
mode
G press the button
/ DIS 7.
The time appears on the display for eight
seconds.
G Press the MENU button 8.
“MENU” appears on the display.
G Press the or button : re-
peatedly until “24 H MODE” or “12
H MODE” appears on the display.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
TONE AND VOLUME BALANCE
Setting the volume distribution
left/right (balance)
Tone and volume balance
You can adjust the tone and volume
balance separately for every audio
source (radio, CD, CD changer, AUX
and traffic announcements).
G To set the volume distribution left/
right (balance), press the AUD / LD
= button.
Note:
“BASS” appears on the display.
G Adjustments to tone and volume
balance for traffic announcements
can only be made during a traffic
announcement.
G Press the button : repeatedly
until “BALANCE” appears on the
display.
G Press the or button : to set
Adjusting the bass
the volume distribution left/right.
G Press the AUD / LD = button.
“BASS” appears on the display.
G Press the MENU button 8 or OK
; once you have completed the
setting.
G Press the or button : to set
the bass.
Setting the volume distribution
front/rear (fader)
G Press the MENU button 8 or OK
; once you have completed the
setting.
G To set the volume distribution front/
rear (fader), press the AUD / LD =
button.
Adjusting the treble
“BASS” appears on the display.
G Press the AUD / LD = button.
“BASS” appears on the display.
G Press the button : repeatedly
until “FADER” appears on the dis-
play.
G Press the button : repeatedly
until “TREBLE” appears on the dis-
play.
G Press the or button : to set
the volume distribution front/rear.
G Press the or button : to set
G Press the MENU button 8 or OK
; once you have completed the
setting.
the treble.
G Press the MENU button 8 or OK
; once you have completed the
setting.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
LOUDNESS
EQUALIZER
Switching loudness on/off
Equalizer
Loudness means the bass and treble This car radio is fitted with a parametric
are increased to a comfortable level at digital equalizer. In this case, paramet-
lower volume levels.
ric means that for each of the 2 filters,
one frequency can be individually raised
or lowered (GAIN +7 to - 7).
G Press the AUD / LD = button for
approx two seconds.
The following filters are available:
When loudness is activated, LD lights
up on the display.
G LOW EQ
G HIGH EQ
60 - 100 Hz
10 000 - 17 500 Hz
Setting the loudness intensity
The loudness level can be raised in
steps of one to six.
These filters can be set without meas-
uring equipment. This means that the
sound quality inside the vehicle can be
greatly influenced.
G Press the MENU button 8.
“MENU” appears on the display.
Notes on adjusting the equalizer
G Press the or button : re-
peatedly until “LOUDNESS” ap-
pears on the display.
We recommend you use a CD you are
familiar with when adjusting the equal-
izer.
G Press the or button : to set
Before adjusting the equalizer, set the
tone and volume balance to zero and
deactivate the loudness function.To do
this, please see the chapter “Tone and
volume balance”.
the desired volume increase.
G Press the MENU button 8 or OK
; once you have completed the
setting.
G Listen to the CD you have chosen.
G Evaluate the tone impression ac-
cording to your taste.
G Now consult the chart “Sound im-
pression” section of “An aid to ad-
justing the equalizer”.
G Set the equalizer values as de-
scribed under “What to do”.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUALIZER
Switching the equalizer on/off
Setting the level indicator
In order to switch on the equalizer,
The level indicator (spectrometer) on
your display briefly indicates the volume,
tone and equalizer settings with sym-
bols on your display as you make the
corresponding settings.
G hold down the EQ < button until
DEQ lights up on the display and
“EQ ON” appears briefly.
To switch off the equalizer,
When settings are not being made, the
spectrometer indicates the original lev-
el of the car radio.
You can also set the type of spectromet-
er on your menu.
G hold down the EQ < button until
DEQ goes out on the display and
“EQ OFF” appears briefly.
Setting the equalizer
There are two types available.
G Press the EQ button <.
“LOW EQ” appears on the display.
Selecting a spectrometer type
G Press the MENU button 8.
“MENU” appears on the display.
G Select between “LOW EQ” and
“HIGH EQ” by pressing the or
button :.
G Press the or button : re-
peatedly until “EQ DISPLAY” ap-
pears on the display.
G Press the or button :.
G To select the frequency, press the
button :.
G Press the or button : to
choose between displaying
“SPECTRUM 1” and “SPECTRUM2”
or “EQ DISP OFF” set the volume
distribution left/right.
G Set the level using the or but-
ton :.
G To select the next filter, first press
the OK button ;, then the or
button :.
G Press the MENU button 8 or OK
; once you have completed the
setting.
G When all the settings have been
selected, press the EQ button <.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUALIZER
Setting aid for the equalizer
Commence settings at mid and treble section and complete them in the bass
section.
Sound impression/problem
What to do
Bass reproduction too weak
Raise bass with
frequency: 60 to 100 Hz (LOW EQ),
level: +4 to +6
Muffled reproduction
Low transparency
No instrumental brilliance
Raise tweeter range with
frequency: approx. 12,600 Hz
(HIGH EQ),
level: +2 up to +4
49
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL AUDIO SOURCES
External audio sources
TECHNICAL DATA
Technical data
In place of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If there is no CD changer connected to
your unit, two external audio sources
can be hooked up.
Amplifier
Output power:
4 x 25 watts sine
in accordance
with DIN 45 324 at
14.4V,
4 x 45 watts max.
power
The AUX output has to be switched on
in the install menu.
To connect up an external audio source,
you will need an adapter cable, obtain-
able from any authorised Blaupunkt
dealer.
Tuner
Frequency ranges:
FM :
MW :
LW :
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
(Wiesbaden CD51 does not feature
MW and LW)
Switching the AUX input on/off
G Press the MENU button 8.
“MENU” appears on the display.
FM transmission range:
35 - 16 000 Hz
G Press the or button : re-
peatedly until “AUX-IN-1 OFF” or
“AUX-IN-1 ON” appears on the dis-
play.
CD
Transmission range:
20 - 20 000 Hz
G Press the or button : to
switch AUX on or off.
G Press the MENU button 8 or OK
; once you have completed the
setting.
Pre-amp output
4 channels:
3 V
Note:
Input sensitivity:
When the AUX input is switched on, it
can be selected using the CD•C button
@.
AUX 1 input
: 2 V / 6 kΩ
Subject to changes!
50
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
Guarantee
The scope of the guarantee complies
with the legal provisions applicable in
the country in which the unit was bought.
Should your car radio prove to be de-
fective, please contact your dealer, pre-
senting proof of purchase.
If the legal guarantee period in your
country is less than 12 months, Blau-
punkt grants a 12-month manufacturer's
guarantee. Not covered by such guar-
antee are damage caused by wear and
tear, improper use or commercial use.
In order to claim the Blaupunkt manu-
facturer's guarantee, please send in the
defective unit along with proof of pur-
chase to the central Blaupunkt after-
sales department in your country. You
can find out which is the nearest ad-
dress to you by calling the telephone
hotline printed on the back of this man-
ual. Blaupunkt reserves the right to re-
pair or replace the defective unit at its
discretion.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
|