Blaupunkt Car Stereo System DVD35 User Manual

Radio / DVD / CD / MP3 / WMA  
Long Beach DVD35  
7 645 680 310  
Operating instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
1
2
Button to switch the device on/  
off and operate the volume  
mute feature.  
OFF button on the remote con-  
trol for switching the device off.  
:
;
AUDIO button.  
Adjusts bass, treble, balance,  
fader and X-bass.  
SRC button to switch sources  
between CD/DVD, Tuner, CD  
changer (if connected) and  
AUX.  
button to open the flip-re-  
lease control panel.  
3
4
Volume control.  
<
=
SETUP button to call up the  
setup menu of the DVD player.  
BNDTS button.  
Short press: Selects the FM  
and AM memory banks.  
Long press: Starts the FM/AM  
Travelstore function.  
MENU button to call up the  
main menu (root menu) of a  
DVD.  
>
ENTER button to confirm menu  
entries on DVDs and in the set-  
up menu.  
5
6
7
DIS•ESC button to change the  
display contents, to close the  
menus without saving changes.  
?
@
MUTE button to mute the de-  
vice.  
Arrow buttons on the remote  
control and the device with  
identical function.  
buttons to start the fast  
forward/reverse search, to con-  
trol slow-motion in DVD mode.  
MENU•OK button  
Short press: Calls up the men-  
us for basic settings and con-  
firms menu entries. Confirms  
menu entries in DVD menus.  
Long press: Starts the scan  
function.  
A
B
button to start and interrupt  
(freeze frame) the DVD play-  
back.  
GOTO button for direct selec-  
tion of playing time or title on a  
CD/DVD, selecting playing time,  
chapter or title on a DVD.  
8
9
DEQ button to call up the  
equalizer menu.  
Buttons 1 - 6.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
C
D
E
DISPLAY button to display  
playing time information on the  
external display.  
M
N
O
P
AUDIO button to select the au-  
dio track of a DVD.  
SUB-T button to select the sub-  
titles of a DVD.  
ANGLE button to select a cam-  
era perspective (dependent  
upon the DVD).  
STOP button to interrupt the  
playback.  
TV MODE button to switch the  
TV standard of the DVD player  
to adjust to the external display.  
button for up and down  
track selection in CD mode and  
to select the previous or next  
chapter in DVD mode, single-  
frame search in DVD mode.  
F
G
H
ZOOM button to zoom the im-  
age area in/out.  
DIMMER button to directly call  
up the display menu.  
Q
RETURN button to change  
back one level in the menu of a  
DVD.  
AUDIO ONLY button  
No function  
R
S
TITLE button to call up the title  
menu of a DVD.  
I
J
PBC button, playback control.  
Numeric keys for direct selec-  
tion of chapters and playing  
time in DVD mode or MP3  
mode.  
PLAY MODE button for setting  
the repeat mode (REPEAT) of a  
CD or DVD.  
K
L
PROGRAM button to program  
the playlist of a CD or DVD.  
button to eject the DVD/CD  
from the device (visible only  
with opened control panel).  
A-B button to define and re-  
peat a self-defined title of a  
DVD/CD.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Listening to stored stations .......... 18  
Scanning receivable stations  
Notes and accessories ........... 8  
Road safety.................................... 8  
Installation...................................... 8  
Remote control RC 14 H ............... 8  
Installations  
(not part of the scope of delivery) .. 9  
Activating/deactivating demo mode .. 9  
Time-out (time window) .................. 9  
(SCAN)........................................ 18  
Setting the scanning time............. 18  
Programme type (PTY) ................ 18  
Optimising radio reception ........... 20  
SHARX ........................................ 20  
Configuring the display ................ 21  
DVD operation ...................... 21  
Region code ................................ 21  
License ........................................ 22  
Switching to DVD mode............... 22  
Starting playback ......................... 23  
Display ......................................... 23  
Fast forward/reverse search ........ 23  
Slow motion ................................. 24  
Single frame................................. 24  
Freeze frame................................ 24  
Interrupting playback ................... 24  
Skipping a chapter ....................... 25  
Repeated playback of a DVD title. 25  
Direct selection of a chapter ........ 25  
Resuming playback at the start  
Detachable control panel ..... 10  
Theft protection............................ 10  
Detaching the control panel ......... 10  
Attaching the control panel .......... 11  
Switching on/off ................... 11  
Adjusting the volume............ 12  
Setting the power-on volume........ 12  
Quickly reducing the volume  
(Mute) .......................................... 13  
Telephone audio/navigation audio ..13  
Setting the volume of the  
confirmation beep ........................ 14  
Automatic sound .......................... 15  
Radio mode........................... 15  
Adjusting the tuner ....................... 15  
Switching to radio mode .............. 16  
Switching the RDS function  
on or off (FM only) ....................... 16  
Selecting the waveband/  
of the first title of a DVD............... 26  
Displaying subtitles ...................... 26  
Selecting the playback language.. 27  
Changing the camera perspective .. 27  
Zooming in/out of an image area.. 27  
memory bank ............................... 16  
Tuning into a station ..................... 16  
Setting the sensitivity of  
station seek tuning ....................... 17  
Storing stations ............................ 17  
Storing stations automatically  
(Travelstore) ................................. 17  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
DVD menu............................. 28 CD mode ............................... 37  
Displaying the DVD menu ............ 28 Switching to CD mode................. 37  
Selecting menu entries ................ 28 Selecting tracks ........................... 37  
Exiting the DVD menu .................. 28 Direct track selection with the  
Displaying the title menu .............. 28 remote control.............................. 37  
Playback of DVD audio ................ 29 Fast track selection...................... 38  
Repeated playback of a defined  
section of a title............................ 29 Random track play (MIX).............. 39  
Programming your favourite track Scanning tracks (SCAN) ............. 39  
Fast searching (audible)............... 38  
with the remote control ................ 29 Repeating tracks (REPEAT) ......... 39  
Repeated playback of a defined  
section of a title............................ 40  
DVD setup............................. 30  
Calling up the setup menu ........... 30  
Interrupting playback (PAUSE)..... 40  
Performing settings in the  
Changing the display ................... 40  
setup menu .................................. 30  
Displaying CD text ....................... 41  
General Setup - general settings . 31  
Audio Setup ................................. 32  
Video Setup - image settings ....... 32  
Programming your favourite track  
with the remote control ................ 41  
Ejecting a CD .............................. 42  
Preferences - preferred settings .. 33  
MP3/WMA mode ................... 42  
Setting password protection -  
Assigning a password.................. 35 Preparing an MP3/WMA CD ....... 42  
Exiting the setup menu ................. 36 Switching to MP3 mode............... 44  
Setting the display  
(internal display)........................... 44  
Selecting the directory  
on the device ............................... 44  
Selecting a track on the device .... 45  
Selecting a directory/track  
with the remote control ................ 45  
Fast search .................................. 46  
Random track play – MIX ............. 47  
Scanning tracks – SCAN ............. 47  
Repeated playback of individual tracks  
or entire directories – REPEAT ......... 47  
Repeated playback of a defined  
section of a title............................ 48  
Interrupting playback (PAUSE)..... 48  
Selecting MP3 info ...................... 48  
Displaying scrolling texts (scroll) .. 49  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
CD-changer mode ................ 49 Sound.................................... 54  
Switching to CD-changer mode ... 49 Adjusting the bass ....................... 54  
Selecting CDs ............................. 49 Adjusting the treble ...................... 54  
Selecting tracks ........................... 49 Setting the left/right volume  
Fast searching (audible)............... 50 distribution (balance).................... 55  
Changing the display ................... 50 Adjusting the front/rear volume  
Repeating individual tracks or  
distribution (fader)........................ 55  
whole CDs (REPEAT) .................. 50  
Random track play (MIX).............. 51  
Scanning all tracks on all CDs  
(SCAN)........................................ 51  
Naming CDs ................................ 51  
X-BASS ................................. 55  
Equalizer ............................... 56  
Switching the equalizer on/off ...... 56  
Selecting sound presets .............. 56  
Selecting vehicle presets ............. 57  
Manually adjusting the equalizer... 57  
Help adjusting the equalizer ......... 59  
CLOCK time .......................... 53  
Displaying the time....................... 53  
Setting the clock manually ........... 53  
Selecting 12/24-hour clock mode ..53  
Displaying the time continuously  
Adjusting the display settings .60  
Adjusting the display brightness... 60  
Adjusting the viewing angle.......... 60  
when the device is off and the  
ignition is on................................. 53  
External audio sources ......... 61  
Switching the AUX input on/off .... 61  
Amplifier/sub-out ................. 62  
Switching the internal amplifier  
on/off ........................................... 62  
Switching the dual zone on/off ..... 62  
Specifications ....................... 63  
Amplifier ...................................... 63  
Tuner............................................ 63  
DVD ............................................. 63  
CD ............................................... 63  
Pre-amp out ................................. 63  
Input sensitivity ............................ 63  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
Notes and accessories  
Note that due to road safety, the driv-  
er should be viewing videos only  
while the vehicle is standing.  
Thank you for choosing a Blaupunkt  
product. We hope you enjoy using this  
new piece of equipment.  
Installation  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
If you want to install your car sound  
system yourself, please read the instal-  
lation and connection instructions that  
follow these operating instructions.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the de-  
vice, please contact your dealer or the  
telephone hotline for your country. You  
will find the telephone number printed  
at the back of this booklet.  
Remote control RC 14 H  
When you operate the Long Beach  
DVD35 for the first time, you must in-  
sert the batteries in the remote con-  
trol.  
Inserting the batteries  
1. Open the battery compartment by  
removing the cover.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
or ask for them directly at:  
2. Battery size: Two AAA batteries,  
type LR03 Micro.  
Before inserting the batteries, en-  
sure that the poles of the battery  
are aligned as shown in the bat-  
tery compartment.  
Blaupunkt GmbH  
Hotline  
Robert Bosch Str. 200  
D-31139 Hildesheim  
Insert the batteries.  
3. Close the battery compartment.  
Road safety  
Note:  
Exhausted batteries do not belong  
in household waste; they should  
be disposed of according to local  
regulations.  
Road safety has absolute  
priority. Only operate your car sound  
system if the road and traffic  
conditions allow you to do so.  
Familiarise yourself with the device  
before setting off on your journey.  
You should always be able to hear  
police, fire and ambulance sirens in  
good time from inside your vehicle.  
For this reason, listen to your car  
sound system at a suitable volume  
level during your journey.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
External display  
Activating the remote control  
An external display is required to  
view DVD movies and VCDs. You  
can obtain further information  
about suitable monitors from your  
Blaupunkt dealer.  
Point the remote control at the infrared  
receiver in the front of the device.  
Operating angle: Approx. 30° in each  
direction from the front side of the IR  
receiver in the front of the device.  
Amplifiers  
The accompanying remote control al-  
lows for operating all the functions of  
the DVD mode and controlling the ba-  
sic functions of the other operating  
modes.  
Any Blaupunkt amplifier can be  
used.  
CD changers  
You can connect the following  
Blaupunkt CD changers:  
CDC A 03, CDC A 08 and  
IDC A 09.  
You cannot switch the device on/off  
using the accompanying remote con-  
trol.  
Activating/deactivating demo  
mode  
Installations  
(not part of the scope of delivery)  
You can activate the demo mode at the  
device. In demo mode, the different  
functions of the device are displayed.  
Use only accessories approved by  
Blaupunkt.  
Remote controls  
Press the MENU•OK button 7.  
The RC 10 steering wheel remote  
control allows you to access the  
most important functions of your  
car sound system safely and con-  
veniently from your steering  
wheel.  
The display shows the menu.  
Press and hold the MENU•OK  
button 7 pressed for more than  
four seconds while the menu is  
displayed to activate or deactivate  
the demo mode.  
You cannot switch the device on/  
off using the remote control.  
Time-out (time window)  
The device features a time-out func-  
tion.  
The RC 13 H cable remote control  
and the corresponding adapter al-  
lows for controlling the RSA (Rear  
Seat Entertainment) in the dual  
zone mode. You can obtain further  
information from your Blaupunkt  
dealer.  
For example, if you press the  
MENU•OK button 7 and select a  
menu item, the device switches back  
after approx. 16 seconds after the last  
button activation. The settings per-  
formed are saved.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL PANEL  
Detachable control panel  
Theft protection  
The device is equipped with a detach-  
able control panel (flip-release panel)  
as a way of protecting your equipment  
against theft. The device is worthless  
to a thief without this control panel.  
Detaching the control panel  
Press the  
button 2.  
The control panel opens out towards  
you.  
Hold the control panel by its right  
side and then pull it straight out of  
the bracket.  
Protect your device against theft by  
taking the control panel with you when-  
ever you leave your vehicle. Do not  
leave the control panel inside your ve-  
hicle - not even in a hiding place.  
The control panel has been designed  
to be easy to use.  
Notes:  
Notes:  
All the current settings are saved.  
Never drop the control panel.  
Any inserted DVD/CD remains in  
the device.  
Never expose the control panel to  
direct sunlight or other heat sourc-  
es.  
The device switches off automati-  
cally after approx. one minute.  
Avoid direct skin contact with the  
control panel’s electrical contacts.  
If necessary, please clean the  
contacts of the KeyCard with a  
lint-free cloth moistened with  
cleaning alcohol.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL PANEL  
SWITCHING ON/OFF  
Attaching the control panel  
Switching on/off  
Hold the control panel at approxi-  
There are various ways of switching the  
device on/off:  
mately right angles to the device.  
Slide the control panel into the de-  
vice’s guides that are positioned  
on the left and right at the lower  
edge of the housing. Push the  
control panel carefully into the  
bracket until it clicks into place.  
Switching on/off using the vehicle  
ignition  
The device will switch on/off simulta-  
neously with the ignition if the device  
is correctly connected to the vehicle’s  
ignition and you did not switch the de-  
vice off by pressing button 1.  
Flip up the control panel and care-  
fully press it into the device until it  
clicks into place.  
Switching the device on/off using  
the detachable control panel  
Detach the control panel.  
The device switches off automatically  
after approx. one minute.  
2.  
Attach the control panel again.  
1.  
The device switches on. The last set-  
ting (radio, DVD/CD, CD changer or  
AUX) will be reactivated.  
Note:  
When attaching the control panel,  
make sure you do not press the  
display.  
Switching on/off using button 1  
To switch on the device, press but-  
ton 1.  
If the device was still switched on when  
you detached the control panel, it will  
automatically switch on with the last  
setting activated (radio, DVD/CD, CD  
changer or AUX) when the panel is  
replaced.  
To switch off the device, press and  
hold down button 1 for longer  
than two seconds.  
The device switches off.  
Note:  
To protect the vehicle battery, the  
device will switch off automatically  
after one hour if the ignition is off.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCHING ON/OFF  
ADJUSTING THE VOLUME  
Adjusting the volume  
Switching the device off with the  
remote control  
Note:  
The device can also be switched off  
using the supplied RC 14 H remote  
control.  
The internal amplifier can be  
switched off. If the loudspeakers  
do not emit any sound, please  
read the section entitled “Switch-  
ing the internal amplifier on/off” in  
the “Amplifier” chapter.  
Press the OFF button 1 on the  
remote control.  
The device switches off.  
You can adjust the volume in steps from  
0 (off) to 50 (maximum).  
To increase the volume,  
turn the volume control 3 clock-  
wise.  
To decrease the volume,  
turn the volume control 3 anti-  
clockwise.  
Adjusting the volume with the  
remote control  
The volume can also be adjusted us-  
ing the supplied remote control.  
To increase the volume, press the  
VOL+ button 3 on the remote  
control.  
To decrease the volume, press the  
VOL- button 3 on the remote  
control.  
Setting the power-on volume  
You can set the default volume level at  
which the device plays when it is  
switched on.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VOLUME MENU”  
appears on the display.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
Press the MENU•OK button 7  
Quickly reducing the volume  
(Mute)  
to display the volume menu.  
“ON VOLUME” and the currently set  
value are displayed or “LAST VOL-  
UME” is displayed.  
You can quickly reduce the volume to  
a preset level (Mute).  
Briefly press button 1.  
Adjust the power-on volume using  
“MUTE” appears on the display.  
the  
buttons 6.  
Cancelling mute  
To help you adjust the setting more  
easily, the device will increase or de-  
crease the volume as you make your  
changes.  
To return to your previously set volume  
level,  
briefly press button 1 again.  
If you change the setting to “LAST  
VOLUME”, the volume when the de-  
Muting with the remote control  
vice switches on will be the same as The volume can also be muted using  
the volume level that was set the last the supplied remote control.  
time you switched the device off.  
Press the MUTE button ? on the  
remote control.  
Danger to hearing!  
If the power-on volume is set to  
“MUTE” appears on the display.  
maximum, the volume level can be  
very high when the device is  
To return to your previously set volume  
switched on.  
Cancelling mute  
level,  
If the volume was set to maximum  
press the MUTE button ? again.  
before the device was switched off  
and the power-on volume is set to  
“LAST VOLUME”, the volume level  
can be very high when the device is  
switched on again.  
Severe damage to your hearing can  
be caused in both cases!  
Telephone audio/navigation  
audio  
If your car sound system is connected  
to a mobile telephone or a navigation  
system, the sound system’s volume will  
be muted as soon as you “pick up” the  
phone or as soon as a navigation an-  
nouncement is made. You will then hear  
the caller or navigation announcement  
over the car sound system’s loud-  
speakers. In order for this feature to  
work, the mobile telephone or naviga-  
tion system must be connected to the  
car sound system as described in the  
installation instructions.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
You will need a cable for this with the  
following Blaupunkt number: 7 607 001  
503.  
Setting the volume of the  
confirmation beep  
The system will output a confirmation  
beep for some functions if you keep a  
button pressed down for longer than  
approx. two seconds, for instance,  
You can find out from your Blaupunkt  
dealer which navigation systems can  
be used with your car sound system.  
The volume with which telephone calls when assigning a radio station to a sta-  
or navigation announcements are tion preset button. You can adjust the  
broadcast can be adjusted.  
volume of this beep.  
Press the MENU•OK button 7.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “VOLUME MENU”  
appears on the display.  
Press the or button 6  
repeatedly until “VOLUME MENU”  
appears on the display.  
Press the MENU•OK button 7  
Press the MENU•OK button 7  
to display the volume menu.  
to display the volume menu.  
Press the or button 6  
repeatedly until “TEL/NAVI”  
appears on the display.  
Press the or button 6  
repeatedly until “BEEP VOL”  
appears on the display.  
Set your preferred volume level  
Adjust the volume using the  
buttons 6. “0” means that the  
beep is deactivated, “6” means  
that the maximum beep volume is  
set.  
using the  
buttons 6.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Note:  
You can use the volume control  
3 to adjust the volume of tele-  
phone calls and navigation an-  
nouncements whilst you are lis-  
tening to them.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
RADIO MODE  
Automatic sound  
Radio mode  
This feature automatically adjusts the  
volume of the car sound system to suit  
the speed at which the vehicle is trav-  
elling. In order for this to work, your car  
sound system must be connected as  
described in the installation instruc-  
tions.  
This device is equipped with an RDS  
radio receiver. Many of the receivable  
FM stations broadcast a signal that not  
only carries the programme but also  
additional information such as the sta-  
tion name and programme type (PTY).  
The station name appears on the dis-  
play as soon as the tuner receives it.  
You can adjust the automatic volume  
boost feature in six steps from (0 to 5).  
Adjusting the tuner  
Press the MENU•OK button 7.  
To ensure proper functioning of the  
tuner, the device must be set for the  
region in which you are located. You  
can select among USA, South Ameri-  
ca (S-America), Asia (ASIA), Europe  
(EUROPE) and Thailand. The device  
is factory-set to the region in which it  
was delivered. If you experience prob-  
lems with your radio reception, please  
check this setting.  
Press the or button 6  
repeatedly until “VOLUME MENU”  
appears on the display.  
Press the MENU•OK button 7  
to display the volume menu.  
Press the or button 6  
repeatedly until “AUTO SOUND”  
appears on the display.  
Set the volume adjustment level  
These operating instructions apply to  
the regional setting for USA, South  
America, Asia and Thailand.  
using the  
buttons 6.  
When you have finished making your  
changes,  
Switch off the device by pressing  
button 1.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the buttons 3 and 6 9 and  
hold them pressed.  
Note:  
Press and hold the button 1 until  
The optimum setting for the  
speed-dependent volume adjust-  
ment feature depends on how  
noise levels develop in your partic-  
ular vehicle. You will need to test  
various settings in order to find out  
which is best suited to your vehi-  
cle.  
the display shows TUNER AREA.  
The currently set region is shown on  
the upper display line.  
To select the region, press the  
or button 6.  
Press the MENU•OK button 7  
to exit the menu and save the  
setting.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Switching to radio mode  
To start the radio mode,  
press the BNDTS button 4  
or  
Selecting the waveband/  
memory bank  
This device can be used to receive sta-  
tions in the FM and AM frequency  
bands. Three memory banks (FM1,  
FM2 and FMT) are available for the FM  
waveband and two memory banks (AM  
and AMT) for the AM waveband.  
press the SRC button ; on the  
device or the SOURCE button ;  
on the remote control repeatedly  
until “TUNER” appears on the dis-  
play.  
Six stations can be stored in each  
memory bank.  
Switching the RDS function on  
or off (FM only)  
The RDS function expands the per-  
formance spectrum of your tuner.  
To switch between the memory banks  
FM1, FM2 and FMT or the memory  
banks AM and AMT,  
briefly press the BNDTS button 4.  
If the RDS function is activated, the  
radio automatically tunes into the best  
receivable frequency for the station that  
is currently set.  
Tuning into a station  
There are various ways of tuning into  
a station.  
To use the RDS function,  
Automatic station seek tuning  
press the MENU•OK button 7.  
Press the or button 6.  
“TUNER MENU” appears on the dis-  
play.  
The radio tunes into the next receiva-  
ble station.  
Press the MENU•OK button 7 to  
Tuning into stations manually  
display the tuner menu.  
You can also tune into stations manu-  
ally.  
“RDS ON” or “RDS OFF” appears on  
the display.  
Note:  
To switch RDS on/off, press the  
or button 6.  
You can only tune into stations  
manually if the RDS function is  
deactivated.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the or button 6.  
The RDS functions are active if RDS  
appears on the display.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Setting the sensitivity of station Storing stations  
seek tuning  
Storing stations manually  
You can choose whether the radio  
should only tune into stations provid-  
ing good reception or whether it can  
also tune into those with a weak re-  
ception.  
Select the desired memory bank  
FM1, FM2, FMT, AM or AMT.  
Tune into the station that you  
want.  
Press and hold down one of the  
station buttons 1 - 6 9 for longer  
than two seconds to assign the  
station to that button.  
Press the MENU•OK button 7.  
“TUNER MENU” appears on the dis-  
play.  
Press the MENU•OK button 7 to  
Storing stations automatically  
(Travelstore)  
You can automatically store the six  
strongest stations in the region. The  
stations are stored in the FMT or AMT  
memory bank.  
display the tuner menu.  
Press the or button 6  
repeatedly until “SENS” appears  
on the display.  
The display shows the currently set  
sensitivity level. “SENS HI3” means that  
the tuner is set to the highest sensitiv- Note:  
ity setting. “SENS LO1” means it is set  
to the lowest sensitivity setting.  
Any stations that were previously  
stored in this memory bank are  
deleted in the process.  
Set the sensitivity level that you  
want using the  
buttons 6.  
First, select an FM memory bank  
for an FM Travelstore or an AM  
memory bank for an AM Travel-  
store.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press and hold down the BND•TS  
button 4 for longer than two sec-  
onds.  
Note:  
The storing procedure begins. “TRAV-  
EL STORE PLEASE WAIT” appears  
on the display. After the process has  
completed, the radio will play the sta-  
tion that is stored in memory location  
1 of the FMT or AMT memory bank.  
You can adjust different sensitivi-  
ties for FM and AM.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Press the MENU•OK button 7 to  
display the menu. “SCAN TIME”  
and the currently set time are dis-  
played.  
Listening to stored stations  
Select the memory bank or wave-  
band.  
Press the station button 1 - 6 9  
Set the scanning time that you  
of the desired station.  
want using the  
buttons 6.  
Scanning receivable stations  
(SCAN)  
When you have finished making your  
changes,  
You can use the scan function to play  
all the receivable stations briefly. You  
can set the scanning time from 5 to 30  
seconds in the menu in increments of  
five seconds.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Note:  
The defined scanning time is also  
applied by the system to scanning  
carried out in DVD/CD and CD-  
changer mode.  
Starting SCAN  
Press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
Programme type (PTY)  
Scanning begins. “SCAN” appears  
briefly on the display followed by a dis-  
play of the current station name or fre-  
quency.  
Besides transmitting the station name,  
some FM stations also provide infor-  
mation on the type of programme that  
they are broadcasting. Your car radio  
can receive and display this informa-  
tion.  
Cancelling SCAN and continuing  
listening to a station  
For example, the programme types can  
be:  
Press the MENU•OK button 7.  
Scanning stops and the radio contin-  
ues playing the station that it tuned into  
last.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
CLASSICS  
Setting the scanning time  
Press the MENU•OK button 7.  
You can use the PTY function to select  
stations of a particular programme  
type.  
“TUNER MENU” appears on the dis-  
play.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
PTY-EON  
Selecting a programme type and  
starting seek tuning  
If you specify the programme type and  
start seek tuning, the radio will switch  
from the current station to a station of  
the selected programme type.  
Press the or button 6.  
The programme type that you select-  
ed last appears on the display.  
Notes:  
If you want to select another pro-  
gramme type, you can do so by  
pressing the or button 6  
whilst this display is visible.  
If the tuner does not find a station  
that corresponds to the selected  
programme type, you will hear a  
beep and “NO PTY” appears brief-  
ly on the display. The radio will  
then retune to the station that it  
received last.  
Or  
Press one of the buttons 1 - 6 9  
to select a programme type that is  
assigned to one of these buttons.  
If the tuned radio station or anoth-  
er station on the broadcasting net-  
work broadcasts your selected  
programme type at a later point in  
time, the radio will automatically  
switch from the currently tuned  
station or from DVD/CD or CD-  
changer mode to the station  
whose programme type matches  
the one you selected.  
The selected programme type appears  
briefly on the display.  
Press the or button 6 to  
start seek tuning.  
The radio will then tune into the next  
station that it finds that corresponds to  
your selected programme type.  
Assigning a programme type to a  
station button  
Switching PTY on/off  
Select a programme type using  
the or button 6.  
Press the MENU•OK button 7.  
“TUNER MENU” appears on the dis-  
play.  
Press and hold the desired station  
button 1 - 6 9 for longer than two  
seconds.  
Press the MENU•OK button 7 to  
display the tuner menu.  
The programme type is stored on the  
selected button 1 - 6 9.  
Press the or button 6  
repeatedly until “PTY” appears on  
the display with the current setting.  
Press the or button 6 to  
switch PTY ON or OFF.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Optimising radio reception  
SHARX  
The SHARX function allows you to  
largely avoid interference caused by  
neighbouring radio stations (FM only).  
Switch on the SHARX function if the  
density of radio stations in your area is  
very high.  
Treble reduction feature during  
interference (HICUT)  
The HICUT function improves recep-  
tion during poor radio reception (only  
FM). If reception interferences are  
present, the interference level is auto-  
matically reduced.  
Switching SHARX on/off  
Press the MENU•OK button 7.  
Switching HICUT on/off  
“TUNER MENU” appears on the dis-  
play.  
Press the MENU•OK button 7.  
“TUNER MENU” appears on the dis-  
play.  
Press the MENU•OK button 7 to  
display the tuner menu.  
Press the MENU•OK button 7  
Press the or button 6 re-  
peatedly until “SHARX” appears  
on the display.  
to display the tuner menu.  
Press the or button 6  
repeatedly until “HICUT” appears  
on the display.  
Press the or button 6 to  
switch SHARX on/off.  
Press the or button 6 to  
“SHARX OFF” means automatic band-  
width switching is deactivated, “SHARX  
ON” means it is activated.  
adjust the HICUT setting.  
“HICUT 0” means that no automatic  
reduction of the interference level will  
be made; “HICUT 2” means that a  
maximum reduction will be made.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
DVD OPERATION  
Configuring the display  
DVD operation  
In radio mode, you can choose be-  
tween various display modes.  
Risk of severe damage to the  
DVD/CD drive!  
Mini DVDs/CD singles with a diam-  
eter of 8 cm and non-circular con-  
toured DVDs/CDs (shape CDs)  
must not be used.  
We accept no responsibility for any  
damage to the DVD/CD drive that  
may occur as a result of the use of  
unsuitable DVDs/CDs.  
1. “NORMAL MODE”  
First line: Memory bank and sta-  
tion name (if it can be received)  
Second line: Frequency of the se-  
lected station.  
2. “CLOCK MODE”  
First line: Memory bank and sta-  
tion name (if it can be received)  
Second line: frequency of the se-  
lected station and clock time.  
Region code  
Code Region  
3. “MINIMAL MODE”  
1
NorthAmerica, incl. the US and  
Canada.  
First line: Memory bank and sta-  
tion name (if it can be received)  
Second line: No display.  
2
Japan, Europe (excl. Eastern  
Europe), Middle East, South  
Africa.  
Briefly press the DIS•ESC button  
5 to switch between the options.  
3
4
Korea and South-East Asia.  
Oceania incl. Australia, New  
Zealand, Central and South  
America.  
5
India, Eastern Europe, Africa,  
and Russia.  
6
China.  
All  
regions.  
The DVDs are identified with the re-  
gion code applicable to the respective  
region.  
This device is permanently set to the  
region code that is valid for the region  
in which it was sold.  
If the device does not play a DVD  
(“WRONG RC” is shown on the inter-  
nal display), please check whether the  
DVD features the region code that is  
valid for your region.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Playing a DVD with a different region  
code is not possible.  
Switching to DVD mode  
If there is no DVD inserted in the  
drive,  
This device can be used to play the  
following data carriers/data formats:  
switch on the device by pressing  
button 1.  
DVD video and DVD audio.  
DVD-MP3/WMA.  
Press the button 2.  
Video CD (VCD).  
The control panel opens.  
MP3/WMA CDs, see the chapter  
“MP3/WMA mode”.  
Gently insert the DVD with its  
printed side pointing up into the  
drive until you feel some resist-  
ance.  
Audio CDs, see the chapter “CD  
mode”.  
The drive draws in the DVD automati-  
cally.  
License  
Manufactured under license of Dolby  
Laboratories. “Dolby”, “Pro Logic” and  
the double-D symbol are trademarks  
of Dolby Laboratories.  
You must not hinder or assist the drive  
as it draws in the DVD.  
Gently close the control panel  
whilst exerting a little pressure un-  
til you feel it click into place.  
This product contains technologies that  
are copyright-protected under certain  
US-American patents. The copyrights The DVD data are loaded.  
are property of Macrovision Corpora-  
Dependent upon the inserted DVD, the  
playback starts or the DVD menu dis-  
plays.  
tion and other copyright owners. The  
use of this copyright-protected technol-  
ogy must be approved by Macrovision  
Corporation and is intended exclusively  
for private use and other presentations  
in a limited scope, unless Macrovision  
Corporation first issued a respective  
permission.  
If a DVD is already inserted in the  
drive,  
press the SRC button ; on the  
device or the SOURCE button ;  
on the remote control repeatedly  
until “DVD” appears on the display.  
Playback begins from the point at which  
it was last interrupted.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
CHAPTER REMAIN  
Starting playback  
Example: TITLE 01/12 CHAP-  
TER 08/26 00 : 05 : 22: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the remaining playing  
time of the current chapter.  
After the desired DVD/VCD is loaded,  
either the DVD menu is displayed or  
the playback starts. This action is de-  
pendent upon the inserted DVD.  
Press the button A or move  
the selection mark to the menu  
item that starts the movie, and  
press the ENTER button > to  
start the playback.  
Showing/changing the display  
information  
Press the DISPLAY button C on  
the remote control repeatedly until  
the desired information is dis-  
played.  
The DVD starts playing.  
Display  
Different information about the playing  
time can be shown on the connected  
display. The display can be hidden.  
The display information is shown at the  
top edge of the display.  
Hiding the display information  
The following displays are available:  
Press the DISPLAY button C  
repeatedly until DISPLAY OFF  
displays briefly and the display in-  
formation is hidden.  
TITLE ELAPSED  
Example: TITLE 01/12 CHAP-  
TER 08/26 01 : 26 : 14: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the time elapsed of the  
current title.  
Fast forward/reverse search  
You can fast forward or reverse the  
DVD at 2x, 4x, 8x, 16x and 32x the  
speed (dependent upon the DVD;  
some DVDs can only be played up to  
16x the speed).  
TITLE REMAIN  
Example: TITLE 01/12 CHAP-  
TER 08/26 00 : 31 : 58: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the time remaining of  
the current title.  
To fast forward or reverse search the  
DVD,  
press the  
or  
button @ on  
the remote control repeatedly until  
the desired speed is displayed.  
CHAPTER ELAPSED  
Example: TITLE 01/12 CHAP-  
TER 08/26 00 : 01 : 34: The first  
of twelve titles and the eighth of  
26 chapters of this title is playing.  
Next to it is the elapsed playing  
time of the current chapter.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Stopping fast forward/reverse  
search  
Single frame  
You can stop the movie of a DVD and  
watch it in single frames.  
To stop fast forward,  
press the button A on the  
First, press the button A on  
remote control.  
the remote control.  
The DVD is played back at normal  
speed.  
Press the STEP button P on  
the remote control once or several  
times to display the next frames  
Slow motion  
The DVD can be played forward or  
reverse at reduced speed.  
or  
press the STEP button P to  
display the previous frames.  
First, press the button A on  
the remote control.  
Freeze frame  
Press the SLOW button @  
once or several times on the  
remote control for forward slow  
motion  
During playback, press the but-  
ton A on the remote control or  
the button 6 9 on the device.  
The playback is interrupted and shown  
as a freeze frame.  
or  
the SLOW button @ for  
Continuing playback  
reverse slow motion.  
To continue the playback  
After pressing the SLOW  
/
but-  
press the button A on the re-  
ton @ several times, the playback is  
switched to half the regular speed  
(1/2).  
mote control or the button 6  
on the device.  
9
Interrupting playback  
Press the button O on the  
With every additional press of the but-  
ton, the speed is reduced further (1/4,  
1/8 and 1/16).  
remote control.  
To play the DVD at regular speed  
again,  
The playback is interrupted, the start  
screen of the device and the text  
„PRESS PLAY TO CONTINUE“ are  
displayed.  
press the button A on the re-  
mote control.  
Continuing playback  
press the button A on the  
remote control.  
Playback is continued again.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
To repeat the entire DVD,  
Skipping a chapter  
press the PLAY MODE button J  
A title of the DVD can be divided into  
several smaller chapters.  
on the remote control a third time.  
The display shows the repeat symbol  
and “ALL”.  
To jump to the next or another chapter,  
press the button P once or  
several times on the remote con-  
trol.  
Cancelling repeat  
If you want to cancel the repeat func-  
tion,  
The playback jumps to the beginning  
of the next or the corresponding follow-  
ing chapter.  
press the PLAY MODE button  
J on the remote control repeat-  
edly until the repeat symbol is no  
longer shown on the display.  
To jump to the beginning of the current  
or a previous chapter,  
press the button P once or  
several times on the remote con-  
trol.  
Direct selection of a chapter  
The remote control can also be used  
to directly select a chapter or a specif-  
ic position (playing time).  
The playback jumps to the beginning  
of the current or the corresponding pre-  
vious chapter.  
Selecting a chapter  
To directly select a chapter,  
Repeated playback of a DVD  
title  
A DVD is divided into different titles and  
chapters, which can be selected on an  
individual basis.  
press the GOTO button B on the  
remote control.  
The external display shows the GOTO  
menu.  
Move the selection mark with the  
buttons of the remote control  
6 to “CHAPTER”.  
Repeated playback of a chapter or  
title  
To repeat the current chapter,  
Press the ENTER button > on the  
press the PLAY MODE button  
J on the remote control.  
remote control.  
Enter the three-digit number of the  
desired chapter using the numeric  
buttons 0 to 9 S on the remote  
control and press the ENTER but-  
ton >.  
The display shows the repeat symbol  
and “CHAPTER”.  
To repeat the current title,  
press the PLAY MODE button J  
on the remote control a second  
time.  
Playback is continued at the desired  
position.  
The display shows the repeat symbol  
and “TITLE”.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
To exit the GOTO menu and continue  
with full playback,  
Resuming playback at the start  
of the first title of a DVD  
press the GOTO button B on the  
Press the  
button A on the  
remote control.  
remote control.  
Selecting the playing time  
Playback resumes at the start of the  
title.  
You can directly select a specific posi-  
tion on the DVD by specifying the play-  
ing time of this position either in the  
chapter or in the title.  
Note:  
For most DVDs, this is the main  
menu (root) of the DVD.  
To jump to a specific position,  
Displaying subtitles  
To display subtitles,  
press the GOTO button B on the  
remote control.  
press the SUB-T button N on  
The external display shows the GOTO  
menu.  
the remote control.  
The display information appears. The  
number of languages available for sub-  
titles and the current language are dis-  
played next to “SUBTITLE”.  
Move the selection mark with the  
buttons of the remote control  
6 to “TT TIME” to set the abso-  
lute playing time in the title, or to  
CH TIME” to set the playing time  
of the current chapter.  
To change the language of the subti-  
tles,  
Press the ENTER button > on the  
press the SUB-T button N once  
or several times until the subtitles  
are displayed in the desired lan-  
guage.  
remote control.  
Enter the desired position in  
hours, minutes and seconds using  
the numeric buttons 0 to 9 S on  
the remote control.  
Note:  
You can also determine in the  
menu of the DVD whether and in  
which language subtitles are dis-  
played (see DVD menu).  
Playback is continued at the desired  
position.  
To exit the GOTO menu and continue  
with full playback,  
press the GOTO button B on the  
remote control.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
read the section “Displaying the  
camera perspective” in the “Set-  
up” chapter.  
Selecting the playback  
language  
To select the playback language,  
Zooming in/out of an image  
area  
You can enlarge a freely selectable  
press the AUDIO button M once  
or several times on the remote  
control.  
The display information is shown. The section of the movie being played up  
number of the language, the number to 4 times or reduce it to one-fourth.  
of available playback languages and  
the current language are shown.  
To enlarge the image area,  
press the ZOOM button F once  
Note:  
You can also select the playback  
or several times on the remote  
control.  
language in the menu of the DVD  
(see DVD menu).  
Every time you press the button, the  
central image area is enlarged incre-  
mentally.Available zoom levels are 2x,  
3x and 4x.  
Changing the camera  
perspective  
There are DVDs that offer two or more  
different camera perspectives for a  
scene.  
Note:  
After setting the desired zoom,  
you can freely move the image  
area with the arrow buttons 6 of  
the remote control.  
The number of the current camera per-  
spective and the number of possible  
camera perspectives is shown in the Reducing the image area  
display information next to the camera  
symbol.  
After the maximum zoom is reached,  
the image is reduced with each press  
of the ZOOM button F in increments  
of 1/2, 1/3 and 1/4.  
To change the camera perspective,  
press the ANGLE button D on  
the remote control.  
Deactivating zoom in/out  
The scene is shown from the next cam-  
era perspective. The display informa-  
tion is shown.  
To continue viewing the movie without  
zoom,  
press the ZOOM button F on  
the remote control repeatedly until  
the image is displayed without  
zoom in/out.  
Note:  
You can specify in the setup menu  
that a camera symbol is shown if  
additional camera perspectives  
are available. For further details,  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
DVD menu  
Selecting menu entries  
DVDs generally provide menus in  
which you can select among different  
options, such as “Start movie”, “Chap-  
ter selection”, etc.  
The DVD menu is offered by the in-  
serted DVD. If you insert a DVD and  
playback starts, the DVD menu auto-  
matically appears on the screen.  
To switch between the individual menu  
entries,  
Note:  
The selection options offered by  
the DVD menu are dependent  
upon the respective DVD.  
press one of the arrow buttons  
/
6 on the remote con-  
trol.  
The DVD menu of a DVD can offer the  
following:  
To confirm a menu entry,  
press the ENTER button > on  
You can select from different lan-  
guages for the playback or the  
subtitles.  
the remote control.  
Exiting the DVD menu  
In addition to the actual movie,  
you can also view the trailer that  
was used in movie theatres or on  
television to promote the movie or  
view the “Making of ...” of the mov-  
ie.  
When you make a corresponding se-  
lection in the DVD menu, e.g. the play-  
back of the movie, you automatically  
leave the DVD menu and the playback  
starts.  
Displaying the title menu  
A movie is divided into several se-  
quential chapters. You can select a  
chapter and directly start the play-  
back in the chapter without first  
having to “fast forward” to the cor-  
responding position like you have  
to with a video cassette.  
You can also call the title menu directly  
to conveniently select the individual ti-  
tles/chapters:  
Press the TITLE button R on the  
remote control.  
The title menu appears.  
Displaying the DVD menu  
You can end the playback at any time  
and display the menu of the DVD.  
Note:  
This function is not supported by  
all DVDs.  
Press the MENU button = on  
the remote control.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Programming your favourite  
track with the remote control  
Playback of DVD audio  
This device can also be used to play  
DVD audio. The functions described  
above can be used provided that the  
DVD supports them.  
In DVD mode, you can use the remote  
control to program a playlist of up to  
20 of your favourite tracks of the cur-  
rent DVD. The playlist is deleted when  
you remove the DVD or when you stop  
the playlist and exit the programming  
mode.  
The following functions are particularly  
useful for DVD audio.  
Repeated playback of a defined  
section of a title  
Note:  
This function is operable only if an  
external display is connected.  
You can use the remote control to de-  
fine a section of a title and repeat it  
endlessly in a loop.  
Defining and starting a playlist  
Note:  
Press the PROGRAM button K  
This function is operable only if an  
external display is connected.  
on the remote control.  
The programming mode is displayed.  
The number of available titles on the  
DVD is displayed and the selection  
mark (green) is positioned at memory  
location 1.  
To define the starting point of the sec-  
tion,  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the re-  
peat function to start.  
Enter the first title and the chapter  
of your playlist with the numeric  
buttons 0 to 9 S.  
To define the ending point of the sec-  
tion,  
Note:  
listen to the title again and press  
the A-B button L on the remote  
control again at the point where  
you want the repeat function to  
end.  
After entering the title, the chap-  
ters available for this title are dis-  
played.  
The selection mark moves to the next  
memory location.  
The section of the title is repeated until  
you press the A-B button L again.  
Enter the next titles and chapters  
of your playlist with the numeric  
buttons 0 to 9 S.  
If your playlist should have fewer than  
twenty titles,  
move the selection mark with the  
arrow buttons 6 to “START” and  
press the ENTER button >.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Stopping the playlist  
DVD setup  
The setup of the device offers a varie-  
ty of options to customise the device.  
To end a running playlist,  
Press the PROGRAM button K  
on the remote control.  
Calling up the setup menu  
To call up the setup menu,  
The programming mode is displayed.  
The selection mark is positioned on  
“STOP”.  
press the SETUP button < on  
the remote control.  
To end the playback of the playlist,  
Performing settings in the  
setup menu  
press the ENTER button >.  
Note:  
The setup menu is divided into five  
sections: General Setup,Audio Setup,  
Video Setup, Preference Page and  
Password Setup.  
You can also edit the playlist by  
moving the selection mark to indi-  
vidual memory locations and en-  
tering a different title with the nu-  
meric buttons.  
Select one of the five sections in  
the setup menu using the buttons  
6 of the remote control or  
the arrow buttons on the device.  
Confirm your entry with the EN-  
TER button > on the remote  
control.  
The selection mark (yellow) is dis-  
played and positioned on the first en-  
try of the selected menu.  
Select the desired menu item us-  
ing the buttons  
6 of the re-  
mote control or the arrow buttons  
on the device.  
Confirm your entries with the EN-  
TER button > on the remote  
control.  
Perform your settings using the  
buttons  
6 of the remote  
control or the arrow buttons on the  
device.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Confirm your entries with the EN-  
TER button > on the remote  
control.  
WIDE: The DVD player is con-  
nected to a 16:9 monitor. The  
wide image is displayed on the  
screen at full size.  
If you want to perform additional set-  
tings in other sections of the menu:  
Displaying the camera perspective  
Press the button 6 of the re-  
mote control or the button 6 on  
the device to return to the selec-  
tion of the menu sections.  
You can specify that a camera symbol  
is shown if more than one camera per-  
spective is available on the DVD. For  
this purpose, select the setting “ON”.  
To exit the setup menu,  
The setting of the camera perspective  
is performed under the “Angle Mark”  
menu item.  
press the SETUP button < on  
the remote control.  
General Setup - general  
settings  
Displaying captions  
Captions are special subtitles that can-  
not be switched on/off using the subti-  
tle function of a DVD. You can use this  
menu to switch these subtitles on or  
off. Select the setting “Off” to switch it  
off.  
In the general settings, you can define  
the type of connected display, display  
a symbol if more than one camera per-  
spective is available, switching captions  
on and off, and set the priority for au-  
dio or video DVDs.  
DVD/DVD audio priority  
Selecting the monitor setting  
DVD audio generally contains audio  
data in two versions:  
The setting of the monitor is performed  
under the “TV Display” menu item.  
One high-resolution uncompressed  
variant and one compressed variant  
(e.g. in DTS or Dolby Digital).  
The following monitor settings are avail-  
able:  
Here you can define whether you want  
to listen to high-resolution audio data  
or to compressed audio data.  
Normal/LB: The DVD player is  
connected to a 4:3 monitor. The  
wide image is displayed on the  
screen at full width with black bars  
at the top and bottom edge of the  
screen.  
Select the “DVDAudio” setting for high-  
er quality or “DVD Video” for the com-  
pressed version.  
Normal/PS: The DVD player is  
connected to a 4:3 monitor. The  
wide image is displayed using the  
full height of the screen. The left  
and right edge of the wide image  
is automatically cut off.  
The setting of the priority is performed  
under the “Priority” menu item.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Setting the LPCM  
Audio Setup  
This device can be used to output a  
linear PCM signal (LPCM) with a sam-  
pling rate of 48 K, 96 K or 192 K.  
The Audio Setup allows you to control  
the SPDIF output of the device, set the  
PCM channel and set the sampling rate  
of the LPCM output. In addition, you  
can control the Dynamic Range Con-  
trol (DRC) and the HDCD filter.  
The LPCM setting is located under  
“LPCM OUT” in the “SPDIF Setup”.  
Dolby Digital Setup -  
Dynamic Range Control  
SPDIF setting  
For the SPDIF output of the device, you  
can select whether an SPDIF-RAW  
signal, an SPDIF-PCM signal a manu-  
ally controlled signal should be output  
or that the SPDIF output should be  
switched off.  
Dynamic Range Control means that  
the difference between “loud” and “soft”  
sounds is adjusted. The volume of soft  
sounds is increased and that of loud  
sounds is lowered. You can use the  
DRC of the device to set the dynamics  
of a Dolby programme in increments  
from “OFF” to “Full”. Select the “FULL”  
setting for full dynamic adjustment.  
Select the desired setting under  
“SPDIF Output”.  
Notes:  
The setting of DRC is located under  
“Dynamic” in the “Dolby Digital Setup”.  
The SPDIF output is not muted for  
traffic announcements, incoming  
telephone calls and navigation  
voice output.  
Setting the HDCD filter  
If you play HDCD-DVDs or CDs (High  
Definition Compatible Digital), you can  
select a filter.  
The audio data of the DVD drive  
are output via the SPDIF output.  
Select the desired filter under “HDCD”.  
PCM channel  
The SPDIF output can be used to out-  
put the PCM data in the “L/R”, “LS/RS”  
or “C/LFE” mode.  
The respective setting can be per-  
formed under “PCM Channel” in the  
“SPDIF Output”.  
Video Setup - image settings  
In the Video Setup, you can perform  
different settings for an optimal image  
playback on the connected display.  
Adjusting picture sharpness  
To adjust the picture sharpness, you  
can select among the settings “High”,  
“Medium” and “Low”.  
The setting for picture sharpness is lo-  
cated in “Quality” under “Sharpness”.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Brightness  
Preferences - preferred  
settings  
You can adjust the brightness in incre-  
ments from -20 to +20.  
Under “Preferences”, you can set the  
television standard of the external dis-  
play, switch PBC on and off, set the  
preferred playback language, select the  
preferred language for subtitles, set the  
parental control, set the region, and  
reset the device.  
The setting for brightness is located in  
“Quality” under “Brightness”.  
Contrast  
You can adjust the contrast in incre-  
ments from -16 to +16.  
The setting for contrast is located in  
“Quality” under “Contrast”.  
To call up the preferred settings,  
press the button O on the  
remote control.  
Gamma correction  
Press the SETUP button < on  
You can adjust the gamma correction  
for playback on TFT displays. You can  
select among the settings “High”, “Me-  
dium”, “Low”, and “None”.  
the remote control.  
Select "Preferences Page" using  
the buttons  
6 of the remote  
control or the arrow buttons on the  
device.  
The setting for gamma correction is  
located in “Quality” under “Gamma”.  
Confirm your entry with the EN-  
TER button > on the remote  
control.  
Colour  
You can adjust the colour in increments  
from -9 to +9.  
Setting the colour television  
standard of the TV device  
The setting for colour is located in  
“Quality” under “Hue”.  
For a perfect image quality, set the col-  
our television standard on the device  
which is used by the attached monitor.  
Colour saturation (for NTSC only)  
You can adjust the colour saturation in  
increments from -9 to +9.  
“PAL” is the standard used in Europe,  
“NTSC” is the standard for the Ameri-  
can/Asiatic region.  
The setting for colour saturation is lo-  
cated in “Quality” under “Saturation”.  
If you select the “MULTI” setting, the  
standard of the DVD is used for the  
output.  
Luminance (for NTSC only)  
You can select the settings “0T” and  
“1T” for luminance.  
The setting of the television standard  
is performed under the “TV TYPE”  
menu item in the “Preferences Page”  
menu.  
The setting for luminance is located in  
“Quality” under “Luma Delay”.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Note:  
Selecting the language for the DVD  
menu  
The television standard can also  
be switched using the remote con-  
trol. Press the TV-Mode button E  
repeatedly until the desired televi-  
sion standard is displayed.  
You can preselect the preferred lan-  
guage for the menus of the DVD. If the  
selected language for menus is avail-  
able on the DVD, the menus of the DVD  
are displayed in the preset language.  
Switching playback control on/off  
The setting of the language for the DVD  
menu is performed in the “Disc Menu”  
menu item.  
If the Playback Control (PBC) function  
is switched off, the titles and chapters  
of a VCD/SVCD are played in ascend-  
ing order. With PBC on, the VCD/  
SVCD is played with the predefined  
menus and in logical order.  
Parental control  
You can secure the device against un-  
authorised use by assigning a pass-  
word. In addition, you can specify a  
rating level.  
The setting for PBC is located under  
“PBC”.  
Selecting the playback language  
Rating level means that some DVDs  
are equipped with a code that de-  
fines the age-appropriate release.  
You can preselect the preferred play-  
back language of the DVD. If the se-  
lected language is available on the  
DVD, the playback starts with the pre-  
set language.  
If you set a rating level that is lower  
than the one found on the inserted  
DVD, it can be played only after enter-  
ing the password.  
The setting of the playback language  
is performed under the “Audio” menu  
item.  
Note:  
Not all DVDs support the Rating  
Level function.  
Selecting the language of subtitles  
In the menu you can define which mov-  
ies can be played. These ratings follow  
the recommendations of the Motion Pic-  
ture Association of America (MPAA).  
You can preselect the preferred lan-  
guage for subtitles. If the selected lan-  
guage for subtitles is available on the  
DVD, the subtitles are displayed in the  
preset language.  
The setting of the subtitles is performed  
under the “Subtitle” menu item.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
The following options can be selected: The setting for the parental control can  
be performed in the “Parental” menu  
item.  
1 KID SAF: Approved for children  
2 G: Approved for children  
Resetting the device  
3 PG:Accompanying adult during play-  
back is suggested.  
You can reset the device, thereby de-  
leting all, personal setting (including the  
self-defined password) and re-estab-  
lish the basic factory settings.  
4 PG 13: Accompanying adult is sug-  
gested, not suitable for children under  
the age of 13.  
Resetting the device is performed in  
the “Default” menu item.  
5 PG-R: Only for adolescents accom-  
panied by an adult. Prohibited for chil-  
dren, contents includes violence, ob-  
scene language, etc.  
Setting password protection -  
Assigning a password  
You can activate the password protec-  
tion for the device. With activated pass-  
word protection, you can change the  
age-appropriate release/parental con-  
trol only after entering the password.  
6 R: Prohibited for adolescents, con-  
tents includes violence, obscene lan-  
guage, etc.  
7 NC 17: Contents not suitable for  
adolescents under the age of 17.  
8 ADULT: Contents for adults only:  
Violence, sex, etc.  
Activating/deactivating password  
protection  
Notes:  
The password protection can be acti-  
vated (ON) or deactivated (OFF) in the  
“Password Mode” menu. To change  
the setting, you must enter the current  
password using the numeric buttons  
S.  
Some blocked DVDs can be re-  
leased directly at the start with  
YES (ENTER) and the password.  
Others require you to change the  
rating level in the setup before the  
playback of the DVD. This action is  
dependent upon the DVD.  
If you have not yet entered a password,  
use the preset password 000000.  
If you activated password protec-  
tion, the age-appropriate release  
can only be changed after enter-  
ing the password. For further de-  
tails, please read the section “Acti-  
vating/deactivating password pro-  
tection”.  
After you have entered the correct  
password, the entry marking automat-  
ically switches to “OK”.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATION  
Changing the password  
Exiting the setup menu  
You can change the preset password  
and define your own. The password  
must have six digits. To change the  
password, you must first enter the old  
password. If you have not yet assigned  
a password, use the preset password  
000000.  
To exit the setup menu,  
press the SETUP button < on  
the remote control.  
Or  
select “Exit Setup Menu” using the  
buttons  
6 of the remote con-  
trol or the arrow buttons on the de-  
vice.  
The password is changed in the “Pass-  
word” menu. To change the password,  
you must first enter the current pass-  
word with the numeric buttons S and  
then enter the new password twice.  
Confirm your entry with the EN-  
TER button > on the remote  
control.  
After you have entered the correct  
password and entered the new pass-  
word twice, the entry marking automat-  
ically switches to “OK”.  
Note:  
If you forgot your password, you  
can use the master code 136900  
and assign a new password.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
The drive draws in the CD automati-  
cally.  
CD mode  
You can use this device to play stand-  
ard audio CDs, CD-Rs and CD-RWs  
with a diameter of 12 cm. To avoid prob-  
lems when playing CDs, you should not  
burn CDs at speeds greater than 16x.  
You must not hinder or assist the drive  
as it draws in the CD.  
Gently close the control panel  
whilst exerting a little pressure un-  
til you feel it click into place.  
To ensure proper functioning, use only  
CDs with the Compact-Disc logo.  
Copy-protected CDs can cause play-  
back problems. Blaupunkt cannot guar-  
antee the proper functioning of copy-  
protected CDs!  
The CD starts playing.  
If a CD is already inserted in the  
drive,  
press the SRC button ; on the  
device or the SOURCE button ;  
on the remote control repeatedly  
until “DISC” appears on the dis-  
play.  
Besides being able to play audio CDs  
on this device, you can also play CDs  
containing MP3 music files and DVDs.  
For further details, please read the  
chapters “MP3 mode” and “DVD  
mode”.  
Playback begins from the point at which  
it was last interrupted.  
Selecting tracks  
Risk of severe damage to the  
DVD/CD drive!  
Press one of the arrow buttons 6  
to select the next or previous  
track, or press the or button  
P on the remote control.  
CD singles with a diameter of 8 cm  
and non-circular contoured CDs  
(shape CDs) must not be used.  
We accept no responsibility for any  
damage to the DVD/CD drive that  
may occur as a result of the use of  
unsuitable DVDs/CDs.  
If you press the or button 6 or  
P once, the current track is played  
again.  
Direct track selection with the  
remote control  
In CD mode, you can directly select  
tracks with the remote control or se-  
lect a specific playing time on the CD  
or in the current track.  
Switching to CD mode  
If there is no CD inserted in the drive,  
switch on the device by pressing  
button 1.  
Press the button 2.  
Note:  
The control panel opens.  
This function is operable only if an  
external display is connected.  
Gently insert the CD with its print-  
ed side uppermost into the drive  
until you feel some resistance.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
to start using the numeric buttons  
S.  
Track selection  
Enter the number of the desired  
track directly using the numeric  
buttons 0 to 9 S of the remote  
control.  
After entering the time, the playback is  
continued at the desired position.  
Fast track selection  
To quickly select tracks backwards or  
forwards,  
After entering the number, the desired  
track begins to play.  
Or  
press and hold down one of the  
Press the GOTO button B re-  
peatedly until the external display  
shows “SELECT TRACK”.  
/
buttons 6 until fast-re-  
verse/fast-forward track selection  
begins.  
Enter the number of the desired  
track using the numeric buttons 0  
to 9 S, e.g. 0 2 for the second or  
1 2 for the twelfth track.  
Fast searching (audible)  
To fast search backwards or forwards,  
press and hold down one of the  
buttons 6 until fast searching  
backwards/forwards begins.  
After entering the number, the desired  
track begins to play.  
Fast searching with the remote  
control  
Selecting the playing time on the  
CD  
You can perform a fast searching with  
different speeds (2x, 4x, 8x, 16x, and  
32x) with the remote control.  
Press the GOTO button B re-  
peatedly until the external display  
shows “DISC GO TO”.  
Note:  
Enter the desired playing time in  
the minute-second format where  
you want the playback to start us-  
ing the numeric buttons S.  
The search speed is shown on an  
external display (optional equip-  
ment).  
For fast searching forwards  
After entering the time, the playback is  
continued at the desired position.  
press the  
button @ on the re-  
mote control repeatedly until the  
desired speed is shown.  
Selecting the playing time in the  
current track  
For fast searching backwards  
Press the GOTO button B re-  
peatedly until the external display  
shows “TRACK GO TO”.  
press the  
button @ on the re-  
mote control repeatedly until the  
desired speed is shown.  
Enter the desired playing time in  
the minute-second format where  
you want the playback in the track  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
To end the searching,  
Repeating tracks (REPEAT)  
press the button A on the re-  
If you want to repeat a track,  
mote control.  
press the RPT 4 button 9.  
Random track play (MIX)  
Press the 1 MIX button 9.  
“REPEAT TRACK” appears briefly on  
the display, and the RPT symbol is  
shown. The track is repeated continu-  
ously until you deactivate RPT.  
“MIX CD ON” appears briefly on the  
display and the MIX symbol is dis-  
played. The next randomly selected  
track will then be played.  
Cancelling REPEAT  
If you want to cancel the repeat func-  
tion,  
Cancelling MIX  
press the RPT 4 button 9 again.  
Press the 1 MIX button 9 again.  
“REPEAT ALL” appears briefly on the  
display, and the RPT symbol disap-  
pears. Normal playback is then re-  
sumed.  
“MIX CD OFF” appears briefly on the  
display and the MIX symbol disap-  
pears.  
Scanning tracks (SCAN)  
You can scan (briefly play) all the tracks  
on the CD.  
REPEAT with the remote control  
In CD mode, you can select the RE-  
PEAT mode with the remote control.  
Press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
To repeat a track,  
press the PLAY MODE button J  
repeatedly until “TRACK” is shown  
on the external display next to the  
repeat symbol.  
The next track will then be scanned.  
Note:  
You can set the scanning time.  
For further information, please  
read the section entitled “Setting  
the scanning time” in the “Radio  
mode” chapter.  
To cancel REPEAT,  
press the PLAY MODE button J  
repeatedly until “ALL” is shown on  
the external display next to the re-  
peat symbol.  
Cancelling SCAN and continuing  
listening to a track  
To end the scanning process,  
press MENU•OK button 7.  
The currently scanned track will then  
continue to be played normally.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Repeated playback of a defined Changing the display  
section of a title  
You can select different displays for CD  
mode:  
You can use the remote control to de-  
fine a section of a title and repeat it  
endlessly in a loop.  
“NORMAL MODE”:  
First line: Track number  
Second line: Playing time  
Note:  
This function is operable only if an  
external display is connected.  
“INFO MODE”:  
First line: Track number and play-  
ing time.  
To define the starting point of the sec-  
tion,  
Second line: CD text (if available)  
“CLOCK MODE”:  
First line: Track number and play-  
ing time.  
Second line: CD text (if available)  
and time  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the re-  
peat function to start.  
To define the ending point of the sec-  
tion,  
“MINIMAL MODE”:  
The title number is displayed on  
the top line.  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the re-  
peat function to end.  
Note:  
CD text can only be displayed if  
the appropriate information is con-  
tained on the CD.  
The section of the title is repeated until  
you press the A-B button L again.  
To switch between the display options,  
Interrupting playback (PAUSE)  
Press the button 6 9.  
press the DIS•ESC button 5  
once or several times until the  
desired display is shown.  
“PAUSE” appears on the display.  
Cancelling pause  
Display on an external display  
During the pause, press the but-  
ton 6 9.  
In CD mode, the following information  
is always shown on an external display,  
independent of the selected display of  
the device display:  
Playback is continued.  
You can also interrupt and continue  
playback using the button A on the  
remote control.  
the number of the current track,  
the number of tracks on the CD,  
the track information from the CD  
text (if available)  
and  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
the playing time of the track  
(Single Elapsed)  
Scrolling CD text again  
You can re-scroll the displayed CD text  
at any time in Info Mode.  
or  
the remaining playing time of the  
track (Single Remain)  
Briefly press the 5 SCL button 9.  
Programming your favourite  
track with the remote control  
or  
the elapsed playing time of the CD  
(Total Elapsed)  
In CD mode, you can use the remote  
control to program a playlist of up to  
20 of your favourite tracks of the cur-  
rent CD. The playlist is deleted when  
you remove the CD or when you stop  
the playlist and exit the programming  
mode.  
or  
the remaining playing time of the  
CD (Total Remain).  
To select one of the different time dis-  
play options,  
Note:  
press the DISPLAY button C on  
the remote control repeatedly until  
the desired information is shown  
on the external display.  
This function is operable only if an  
external display is connected.  
Defining and starting a playlist  
Displaying CD text  
Press the PROGRAM button K  
on the remote control.  
Some CDs include CD text. The CD  
text might contain the names of the  
artist, album and tracks.  
The programming mode is displayed.  
The number of available tracks on the  
CD is displayed and the selection mark  
(green) is positioned at memory loca-  
tion 1.  
If the CD text is available on the CD, it  
is shown on the second line of the dis-  
play in Info Mode and Clock Mode. The  
CD text is shown as scrolling text on  
the display with every track change.  
After the CD text is displayed once, the  
first 13 characters of the CD text of the  
current track are displayed.  
Enter the first track of your playlist  
with the numeric buttons 0 to 9 S.  
The selection mark moves to the next  
memory location.  
Enter the next track of your playlist  
with the numeric buttons 0 to 9 S.  
Note:  
The CD text is displayed as scroll-  
ing text if it contains more than  
13 characters in Info mode or  
more than 8 characters in Clock  
mode.  
If your playlist should have fewer than  
20 tracks,  
move the selection mark with the  
arrow buttons 6 to “START” and  
press the ENTER button >.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
MP3/WMA MODE  
Note:  
MP3/WMA mode  
After you have programmed a  
playlist and exited the menu with  
“EXIT”, the playlist is not saved.  
You can also use this car sound sys-  
tem to play DVDs, CD-Rs and CD-  
RWs that contain MP3 music files. You  
can also play WMA files. The opera-  
tion for playing MP3 and WMA files is  
identical.  
Stopping the playlist  
To end a running playlist,  
Press the PROGRAM button K  
Notes:  
on the remote control.  
WMA files with Digital Rights Man-  
agement (DRM) from online music  
shops cannot be played with this  
device.  
The programming mode is displayed.  
The selection mark is positioned on  
“STOP”. To end the playback of the  
playlist,  
WMA files can only be played  
back safely if they were created  
with Windows Media-Player ver-  
sion 8.  
press the ENTER button >.  
Notes:  
If you selected “STOP” and con-  
firmed it with the ENTER button  
>, the playlist is deleted.  
Preparing an MP3/WMA CD  
The various combinations of DVD/CD  
burners, DVD/CD burning software and  
DVD/CD blanks may lead to problems  
arising with the device’s ability to play  
certain CDs. If problems occur with  
your own burned DVDs/CDs, you  
should try another brand of DVD/CD  
blanks or choose another colour of CD  
blanks. To avoid problems when play-  
ing CDs, you should not burn DVDs/  
CDs at speeds greater than 16x.  
If you want to exit the display of  
the playlist without deleting the  
playlist, mark “EXIT” and confirm it  
with the ENTER button >.  
Ejecting a CD  
Press the  
The control panel opens out towards  
you.  
button 2.  
Press the eject button next to the  
CD compartment.  
The format of the DVD/CD must be ISO  
9660 Level 1/Level 2 or Joliet. Other  
formats cannot be played reliably.  
The CD is ejected.  
Remove the CD and close the con-  
trol panel.  
You can create a maximum of 254 di-  
rectories on a DVD/CD. You can use  
this device to access each of these di-  
rectories.  
Notes:  
If a CD is ejected, the drive will  
automatically draw it back in again  
after approx. 10 seconds.  
Up to 599 MP3 files in one directory  
can be managed with this device. The  
maximum number of files per CD/DVD  
CDs can also be ejected if  
another audio source is active.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
is 150,000, the maximum directory If you like your files to be in the correct  
depth is five.  
order, you should use burner software  
that places files in alphanumerical or-  
der. If your software does not provide  
this feature you also have the option of  
sorting the files manually. For this pur-  
pose, you must enter a number in front  
of each file name, e.g. “001”, “002”, etc.  
The leading zeros must also be en-  
tered.  
D
i
D01  
r
e
c
t
D02  
o
r
i
e
s
D03  
D04  
T001  
MP3 tracks can contain additional in-  
formation such as the artist, album and  
track names (ID3 tags). This device can  
display ID3 tags (version 1).  
T001  
T002  
T003  
T004  
T005  
T002  
T003  
T004  
T005  
T006  
T007  
T008  
T009  
T010  
T011  
T
r
a
c
k
s
When creating (coding) MP3 files from  
audio files, you should use bit rates  
from 80 to 320 kbit/s and sampling  
rates of 32, 44 and 48 kHz.  
T001  
F
i
T002  
T003  
T004  
T005  
T006  
l
e
s
This device can only play MP3 files that  
have the “.MP3” file extension.  
Notes:  
To ensure uninterrupted playback,  
You can name each directory using a  
PC. The device is capable of display-  
ing the directory name. Name the di-  
rectories and tracks/files using your CD  
burner software. The software’s instruc-  
tion manual will provide details on how  
to do this.  
do not try changing the file exten-  
sion to “.MP3” of any files other  
than MP3 files and then attempt to  
play them! The device will ignore  
these invalid files during playback.  
Do not use “mixed” CDs contain-  
ing both non-MP3 data and MP3  
tracks (the device only reads MP3  
files during MP3 playback).  
Note:  
When naming directories and  
tracks/files you should avoid using  
accents and special characters.  
You can use a maximum of 32  
characters (including the “.MP3”  
or “.WMA”file extension) for track  
names and directory names.  
Do not use mix-mode CDs con-  
taining both CD-audio tracks and  
MP3 tracks. If you try playing a  
mix-mode CD, the device will only  
play the CD-audio tracks.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
Note:  
The system can display MP3-ID  
Switching to MP3 mode  
MP3 mode is activated in the same  
way as normal CD mode. For further  
information, please read the section  
entitled “Switching to CD mode” in the  
“CD mode” chapter.  
tags (version 1) if they have been  
saved with the MP3 files (for fur-  
ther information, please read the  
instructions that came with your  
PC’s MP3 software or burner soft-  
ware).  
If you connected an external display,  
the following information is displayed  
after the CD is read and the MP3/WMA  
playback has started:  
3. “MP3 BROWSE MODE”:  
First line: Name of current track  
Second line: Name of next track.  
Number of the track and number  
of tracks in the directory.  
4. “CLOCK MODE”:  
First line: Type of file (MP3 or  
WMA), number of track and play-  
ing time.  
Bit rate of the file.  
Elapsed playing time and total  
playing time of the track.  
Second line: MP3 info and time.  
Name of the directory.  
To switch between the different display  
options,  
In the left column, the list of tracks  
in the directory.  
press the DIS•ESC button 5.  
In the right column, MP3 informa-  
tion from the ID tags (only if avail-  
able on the DVD/CD).  
Selecting the directory on the  
device  
For convenient navigation in the data  
structure of the CD, you can display  
the current and the following directory  
on the two lines of the display. The di-  
rectories are displayed with the names  
that you created when burning the CD.  
Whilst the directories are being dis-  
played, you can use the arrow buttons  
to display and select all the available  
directories.  
Setting the display (internal  
display)  
Configuring the default display  
You can display various types of infor-  
mation on the current track:  
1. “NORMAL MODE”:  
First line: Type of file (MP3 or  
WMA), number of track and play-  
ing time.  
During the MP3 playback, press  
the or button 6.  
Second line: Track name  
2. “INFO MODE”:  
The browse mode is automatically  
started, the current track is displayed  
on the first line of the display and the  
next track is displayed on the second  
line.  
First line: Track name.  
Second line: MP3-ID-TAG (if avail-  
able and activated, see “Selecting  
MP3 info”)  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
Press the or button 6  
repeatedly until the first line of  
the display shows a D.  
Selecting tracks in browse mode  
Browse mode conveniently allows you  
to view the tracks contained in a direc-  
tory and then select a particular track.  
Press the button 6.  
The names of the current and the fol-  
lowing directory are shown on the dis-  
play.  
During MP3 playback, repeatedly  
press the DIS•ESC button 5 until  
“MP3 BROWSE MODE” is dis-  
played.  
If you want to select a directory,  
Press the or button 6 to  
display all the tracks contained in  
the directory one after another.  
press one of the  
/
buttons 6  
repeatedly until the directory is  
shown in the top line of the dis-  
play and then press the button  
6.  
If you want to select the track  
shown on the upper display line,  
press the button 6.  
The selected directory is opened. The  
tracks contained in the directory are  
displayed in browse mode.  
Selecting a directory/track with  
the remote control  
In MP3 mode, you can directly select  
directories and tracks using the remote  
control.  
Press the or button 6 re-  
peatedly until the first line of the  
display shows the desired track.  
Press the button 6.  
Note:  
The playback starts, the browse mode  
is automatically ended after approx. 10  
seconds.  
This function is operable only if an  
external display is connected.  
Track selection in the same  
directory  
Selecting a track on the device  
Enter the number of the desired  
track directly using the numeric  
buttons 0 to 9 S of the remote  
control.  
Selecting tracks/files using the  
arrow buttons (Normal, info and  
clock mode)  
To move up or down to another track/  
file in the current directory,  
After entering the number, the desired  
track begins to play.  
press the or button 6 once  
Or  
or several times.  
To move up or down to another track/  
file in the current directory,  
A single press of button 6 restarts  
the current track, if it previously played  
for more than 3 seconds.  
press the or button P once or  
several times.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
To move up or down to another track/  
file in the current directory,  
Selecting a directory  
To select a directory with the remote  
control,  
press the or button 6 once  
or several times to move the se-  
lection mark to the desired track.  
press the button 6 repeatedly  
until the selection mark is posi-  
tioned on the directory symbol.  
Press the ENTER button >.  
The desired track is started.  
Press the ENTER button >.  
The directory list is shown on the ex-  
ternal display.  
Fast search  
To fast search backwards or forwards,  
Press the or button 6 to  
press and hold down the or  
button 6 until fast searching  
backwards/forwards begins.  
mark the desired directory.  
Press the ENTER button >.  
The track list of the directory is dis-  
played.  
Fast searching with the remote  
control  
Press the or button 6 to  
You can perform a fast searching with  
different speeds (2x, 4x, 8x, 16x, and  
32x) with the remote control.  
mark a track in the directory.  
Press the ENTER button >.  
The desired track is started.  
Note:  
The search speed is shown on an  
external display.  
Selecting a track from the track list  
You can display a list of all tracks of a  
DVD/CD on the external display and  
select a track from the list.  
For fast searching forwards  
press the  
button @ on the re-  
mote control repeatedly until the  
desired speed is shown.  
Press the PROGRAM button K.  
The track list is displayed.  
For fast searching backwards  
Enter the number of the desired  
track directly using the numeric  
buttons 0 to 9 S of the remote  
control.  
press the  
button @ on the re-  
mote control repeatedly until the  
desired speed is shown.  
To end the searching,  
After entering the number, the desired  
track begins to play.  
press the button A on the re-  
mote control.  
Or  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
Cancelling SCAN and continuing  
listening to a track  
Random track play – MIX  
To play the tracks in the current direc-  
tory in random order,  
Press and hold down the MENU•OK  
button 7 for longer than two sec-  
onds.  
briefly press the 1 MIX button 9.  
“MIX ON” and the MIX symbol appear  
on the display.  
The currently scanned track will then  
continue to be played normally.  
Cancelling MIX  
Repeated playback of individual  
tracks or entire directories –  
REPEAT  
To cancel MIX,  
press the 1 MIX button 9 repeat-  
edly until “MIX OFF” is displayed.  
To play the current track repeatedly,  
The MIX symbol disappears.  
briefly press the 4 RPT button 9.  
The Repeat function is automatically  
activated, and the display shows the  
RPT symbol.  
“REPEAT TRACK” and RPT appear  
briefly on the display.  
To repeat the whole directory,  
Scanning tracks – SCAN  
You can scan (briefly play) all the tracks  
on the CD.  
press the 4 RPT button 9 again.  
“REPEAT DIR” appears briefly on the  
display.  
Press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
Cancelling REPEAT  
To stop the current track or current di-  
rectory from being repeated,  
The next track will then be scanned.  
“SCAN” briefly appears on the display.  
press the 4 RPT button 9 repeat-  
edly until “REPEAT OFF” is dis-  
played.  
Notes:  
You can set the scanning time.  
For further information, please  
read the section entitled “Setting  
the scanning time” in the “Radio  
mode” chapter.  
RPT disappears from the display.  
REPEAT with the remote control  
In CD mode, you can select the  
REPEAT mode with the remote control.  
The Scan function cannot be acti-  
vated if it is started at the last title  
of a directory.  
Note:  
This function is operable only if an  
external display is connected.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
To repeat a track,  
The section of the title is repeated until  
you press the A-B button L again.  
press the PLAY MODE button J  
repeatedly until “REPEAT ONE” is  
shown on the lowest line of the  
external display.  
Interrupting playback (PAUSE)  
Press the button 6 9.  
“PAUSE“ appears on the display.  
Cancelling pause  
To repeatedly play all the tracks of a  
directory,  
press the PLAY MODE button J  
repeatedly until “REPEAT FOLD-  
ER” is shown on the lowest line of  
the external display.  
During the pause, press the but-  
ton 6 9.  
Playback is continued.  
You can also interrupt and continue  
playback using the button A on the  
remote control.  
To cancel REPEAT,  
press the PLAY MODE button J  
repeatedly until “FOLDER” is  
shown on the lowest line of the  
external display.  
Selecting MP3 info  
If you want to select the “MP3 INFO”  
display mode, you first have to activate  
this function in the menu. In order for  
the system to be able to display MP3  
information, the information must be  
stored on the CD in the form of ID tags  
together with the MP3 files.  
Repeated playback of a defined  
section of a title  
You can use the remote control to de-  
fine a section of a title and repeat it  
endlessly in a loop.  
Press the MENU•OK button 7.  
Note:  
This function is operable only if an  
external display is connected.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
To define the starting point of the sec-  
tion,  
Press the MENU•OK button 7.  
listen to a title and press the A-B  
button L on the remote control at  
the point where you want the re-  
peat function to start.  
Press the or button 6  
repeatedly until “MP3 INFO”  
appears on the display.  
Use the  
buttons 6 to switch  
To define the ending point of the sec-  
tion,  
between the “ON” and “OFF”  
options.  
continue listening to the title and  
press the A-B button L on the  
remote control at the point where  
you want the repeat function to  
end.  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA MODE  
CD-CHANGER MODE  
CD-changer mode  
Displaying scrolling texts  
(scroll)  
The selected information title, track  
names or file name and directory name  
are shown once as scrolling text when  
the title changes.  
Note:  
Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions supplied with  
your CD changer.  
To display the information again as  
scrolling text,  
Switching to CD-changer mode  
briefly press the 5 SCL button 9.  
Press SRC ; on the device or  
the SOURCE button ; on the re-  
mote control repeatedly until  
Note:  
The information is displayed as  
scrolling text if it contains more  
than 13 characters in Normal/Info  
mode, more than 11 characters in  
Browse mode or more than 8  
characters in Clock mode.  
“CDC” appears on the display.  
The device starts playing the first CD  
that the CD changer detects.  
Selecting CDs  
To move up or down to another CD,  
press the or button 6 on the  
device or the or button 6 of  
the remote control once or several  
times.  
Note:  
The device will ignore empty CD  
slots in the changer and slots con-  
taining invalid CDs.  
Selecting tracks  
To move up or down to another track  
on the current CD,  
press the or button 6 on the  
device or the or button 6 of  
the remote control once or several  
times.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-CHANGER MODE  
Press the MENU•OK button 7.  
Fast searching (audible)  
Press the or button 6  
repeatedly until “CD NAME” or  
“DISC NUMBER” appears on  
the display.  
To fast search backwards or forwards,  
hold one of the  
buttons 6  
pressed on the device or the or  
button 6 of the remote control  
until the fast searching backwards  
or forwards starts.  
Use the  
buttons 6 to switch  
between the “CD NAME” and  
“DISC NUMBER” options.  
Changing the display  
You can choose from various display  
options in CD mode:  
When you have finished making your  
changes,  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
“NORMAL MODE”:  
First line: Track number  
Second line: CD number/CD  
name and playing time  
Repeating individual tracks or  
whole CDs (REPEAT)  
To repeat the current track,  
“CLOCK MODE”:  
First line: Track number.  
Second line: CD number/CD  
name and clock time  
briefly press the RPT 4 button 9.  
“REPEATTRACK” appears briefly and  
RPT lights up on the display.  
„MINIMAL MODE”:  
First line: Track number.  
To repeat the current CD,  
To switch between the display options,  
press the RPT 4 button 9 again.  
press the DIS•ESC button 5.  
“REPEAT CD” appears briefly and RPT  
lights up on the display.  
In the menu you can choose to display  
the CD name (if available) instead of  
the CD number. (For further informa-  
tion, please read the “Naming CDs”  
section):  
Cancelling REPEAT  
To stop the current track or current CD  
from being repeated,  
Press the MENU•OK button 7.  
repeatedly press button RPT 4  
9 until “REPEAT OFF” appears  
in the display and RPT disap-  
pears.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-CHANGER MODE  
Stopping SCAN  
Random track play (MIX)  
To stop scanning,  
To play the tracks on the current CD in  
random order,  
press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
briefly press the 1 MIX button 9.  
“MIX CD” appears briefly and MIX lights  
up on the display.  
The currently scanned track will then  
continue to be played normally.  
To play the tracks on all inserted CDs  
in random order,  
Naming CDs  
briefly press the 1 MIX button 9.  
The car sound system allows you to  
assign names for up to 30 CDs so that  
you can recognise them more easily.  
The names can be a maximum of sev-  
en characters long.  
“CD NAME FULL” will appear on the  
display if you try assigning more than  
30 names.  
“MIX ALL” appears briefly and MIX  
lights up on the display.  
Cancelling MIX  
Press the 1 MIX button 9 repeat-  
edly until “MIX OFF” is displayed.  
Scanning all tracks on all CDs  
(SCAN)  
Entering/editing CD names  
Listen to the CD that you want.  
Press the MENU•OK button 7.  
To scan (briefly play) all the tracks on  
all the inserted CDs in ascending or-  
der,  
Press the or button 6  
repeatedly until “VARIOUS  
press and hold down the  
MENU•OK button 7 for longer  
than two seconds.  
MENU” appears on the display.  
Press the MENU•OK button 7.  
“SCAN” and the selected display mode  
appear alternately on the display.  
Press the or button 6  
repeatedly until “CD NAME EDIT”  
appears on the display.  
Note:  
You can set the scanning time.  
For further information, please  
read the section entitled “Setting  
the scanning time” in the “Radio  
mode” chapter.  
Press the MENU•OK button 7.  
You will now enter editing mode.  
If your CD does not have a name yet,  
“ABCDEFG” appears on the display.  
The currently active text input position  
flashes.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-CHANGER MODE  
Use the  
/
buttons 6 to select  
Deleting all CD names  
the character that you want. If you  
want an empty space, simply se-  
lect the underscore.  
You can delete all the CD names stored  
in the car sound system.  
Listen to a CD.  
Use the or button 6 to move  
from one text input position to an-  
other.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “VARIOUS  
When you have finished making your  
changes,  
MENU” appears on the display.  
Press the MENU•OK button 7.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the or button 6  
repeatedly until “CD NAME EDIT”  
appears on the display.  
Deleting a CD name  
Press the MENU•OK button 7.  
Listen to the CD whose name you  
The name of the current CD is dis-  
played.  
want to delete.  
Press the MENU•OK button 7.  
Press and hold down the  
MENU•OK button 7. After ap-  
prox. four seconds you will hear a  
beep and “DELETE NAME” ap-  
pears on the display. Continue  
holding the button pressed down  
until you hear a second beep and  
“DELETE ALL” appears on the dis-  
play.  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “CD NAME EDIT”  
appears on the display.  
Press the MENU•OK button 7.  
Release the MENU•OK button 7.  
The name of the current CD is  
displayed.  
The CD names will be deleted.  
To exit the menu, press the  
MENU•OK button 7 and twice  
DIS•ESC 5.  
Press and hold down the  
MENU•OK button 7. After ap-  
prox. four seconds you will hear a  
beep and “DELETE NAME” ap-  
pears on the display.  
Release the MENU•OK button  
7.  
The CD name will be deleted.  
You can return to the menu by  
pressing the MENU•OK button 7.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK TIME  
Selecting 12/24-hour clock  
mode  
Press the MENU•OK button 7.  
CLOCK time  
Displaying the time  
You can make the clock time appear  
continuously in the bottom part of the  
display while any audio source is acti-  
vated. For further information, please  
read the “Configuring the display” sec-  
tions in the relevant chapters.  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “24 HOUR MODE”  
or “12 HOUR MODE” appears on  
the display.  
Setting the clock manually  
To set the clock time manually,  
press the MENU•OK button 7.  
Press the or button 6 to  
switch between the modes.  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
When you have finished making your  
changes,  
Press the MENU•OK button 7.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Press the or button 6  
repeatedly until “CLOCK SET”  
appears on the display.  
Displaying the time  
continuously when the device is  
off and the ignition is on  
To display the time when the device is  
off and the vehicle ignition is on,  
Press the MENU•OK button 7.  
The time appears on the display. The  
hours flash and can be adjusted.  
Set the hours using the  
tons 6.  
/
but-  
press the MENU•OK button 7.  
Once the hours are set,  
press the button 6.  
The minutes flash.  
Press the or button 6  
repeatedly until “CLOCK MENU”  
appears on the display.  
Set the minutes using the  
Press the MENU•OK button 7.  
/
buttons 6.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK TIME  
SOUND  
Press the or button 6 re-  
peatedly until “OFF CLOCK OFF”  
or “OFF CLOCK ON” appears on  
the display.  
Sound  
You can adjust the sound settings (bass  
and treble) separately for each source  
(radio, DVD/CD, CD changer, AUX).  
The volume distribution settings (bal-  
ance and fader) apply to all the audio  
sources.  
Press the or button 6 to  
switch between the ON/OFF  
settings.  
Note:  
When you have finished making your  
changes,  
Instead of the AUDIO button :  
on the device, you can also use  
the 3D button : on the remote  
control.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Adjusting the bass  
Press the AUDIO button :.  
Press the or button 6 to  
adjust the bass.  
Press the AUDIO : button to  
close the menu, or press the or  
button 6 to make further  
changes to the settings.  
Adjusting the treble  
Press the AUDIO button :.  
Press the or button 6  
repeatedly until “TREBLE”  
appears on the display.  
Press the or button 6 to  
adjust the treble.  
Press the AUDIO : button to  
close the menu, or press the or  
button 6 to make further  
changes to the settings.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND  
X-BASS  
Setting the left/right volume  
distribution (balance)  
To adjust the left/right volume distribu-  
tion (balance),  
X-BASS  
X-BASS means raising the bass at low  
volume.  
Adjusting the X-BASS boost  
Press the AUDIO button :.  
The X-BASS boost (Level) can be set  
in steps ranging from 0 to 6 for one of  
the following frequencies: 32 Hz, 40 Hz,  
50 Hz, 63 Hz or 80 Hz.  
Press the or button 6 repeat-  
edly until “BALANCE” appears on  
the display.  
Press the or button 6 to ad-  
“LVL 0” means that no X-BASS boost  
will be applied, and “LVL6” means that  
X-BASS will be boosted by the maxi-  
mum amount.  
just the balance (right/left).  
Press the AUDIO : button to  
close the menu, or press the or  
button 6 to make further  
Press the AUDIO button : on the  
device or 3D : on the remote  
control.  
changes to the settings.  
Adjusting the front/rear volume  
distribution (fader)  
“BASS” appears on the display.  
To adjust the front/rear volume distri- Press the or button 6 re-  
bution (fader),  
peatedly until “X-BASS” appears  
on the display.  
Press the AUDIO button :.  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
Press the or button 6  
repeatedly until “FADER” appears  
on the display.  
The X-Bass menu is displayed. The  
frequency flashes.  
Press the or button 6 to  
Press the or button 6 to set  
adjust the fader (front/rear).  
the frequency that you want.  
Press the AUDIO : button to  
close the menu, or press the or  
button 6 to make further  
Press the button 6.  
The boost level (LVL) flashes.  
changes to the settings.  
Press the or button 6 to set  
the boost level that you want.  
Press the AUDIO button :.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Equalizer  
The device features a digital equalizer  
DEQ.  
To deactivate the equalizer,  
press the or button 6 re-  
peatedly until “EQ OFF” appears  
on the display.  
This means you have three 5-band  
equalizers, six sound presets and sev-  
en vehicle presets at your disposal.  
Press the MENU•OK button 7  
and then the DIS•ESC 5.  
You can configure the EQ1 - EQ3  
equalizers manually. When doing so  
you can adjust (boost or reduce) one  
frequency of an equalizer band as well  
as the quality factor, i.e. the width of  
the filter.  
Selecting sound presets  
You can select sound presets for the  
following music types.  
POP  
ROCK  
The following bands are available:  
TECHNO  
JAZZ  
LOW 1  
LOW 2  
HIGH 1  
HIGH 2  
HIGH 3  
20 - 250 Hz  
20 - 250 Hz  
CLASSIC  
SPEECH  
315 - 20,000 Hz  
315 - 20,000 Hz  
315 - 20,000 Hz  
The settings for these music styles  
have already been programmed.  
Press the DEQ button 8.  
Switching the equalizer on/off  
To switch the equalizer on/off,  
press the DEQ button 8.  
Press the or button 6 re-  
peatedly until “SOUND PRE-  
SETS”  
appears on the display.  
The equalizer menu appears on the  
display.  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
To activate the equalizer,  
Press the or button 6 re-  
peatedly until the sound preset  
that you want is displayed.  
select one of the sound presets or  
adjust the equalizer manually. For  
further details on this, please read  
the sections that follow in this  
chapter.  
Press the MENU•OK button 7 and  
then the DIS•ESC 5.  
The settings are saved.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Selecting vehicle presets  
You can select optimised equalizer  
settings for the following vehicle types:  
Manually adjusting the  
equalizer  
Notes on adjusting the settings  
COMPACT  
4DOOR  
CONVERT  
VAN  
ROADSTER  
MINI  
We recommend you use a CD that you  
are familiar with for making changes  
to the settings.  
Before adjusting the equalizer, set the  
sound and volume distribution settings  
to zero and deactivate X-BASS. For  
further information, please read the  
“Sound” chapter.  
TRUCK  
The settings for these vehicle types  
have already been programmed.  
Listen to the CD.  
What kind of impression does the  
Press the DEQ button 8.  
sound make?  
Press the or button 6  
repeatedly until “CAR PRESETS”  
appears on the display.  
Now read the “Sound impression”  
column in the table entitled “Help  
adjusting the equalizer”.  
Press the MENU•OK button 7 or  
ENTER > on the remote control.  
Set the equalizer values as de-  
scribed in the “Measures” column.  
Press the or button 6  
repeatedly until the vehicle type  
that you want is displayed.  
Making adjustments  
Press the DEQ button 8.  
Press the MENU•OK button 7  
and then the DIS•ESC 5.  
Press the or button 6 re-  
peatedly until “MANUAL EQ” ap-  
pears on the display.  
The settings are saved.  
Press the MENU•OK button 7  
or ENTER > on the remote  
control.  
Press the or button 6  
repeatedly until the equalizer that  
you want to configure (“USER  
EQ1”, “USER EQ2” or “USER  
EQ3”) appears on the display.  
Press the MENU•OK button 7.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Press the or button 6 re-  
peatedly until the equalizer band  
that you want to configure  
(“LOW1”, “LOW2”, “HIGH1”,  
“HIGH2” or “HIGH3”)  
Note:  
Please note that you can boost or  
reduce one frequency in each  
equalizer band. Proceed in the  
way described above with all the  
equalizer bands that you want to  
adjust.  
appears on the display.  
Press the MENU•OK button 7.  
Press the MENU•OK button 7  
and then the DIS•ESC button 5  
repeatedly or the DEQ button 8.  
Press the or button 6  
repeatedly until the frequency  
that you want is displayed.  
The settings are saved.  
Press the MENU•OK button 7.  
The top line displays the GAIN and  
the quality factor “Q”. The gain setting  
flashes. You can use the quality fac-  
tor to adjust the width of the filter. The  
higher you set the value for the qual-  
ity factor the more directly the filter will  
be applied to the selected frequency.  
To adjust the gain,  
press the or button 6.  
To adjust the quality factor,  
press the button 6.  
The quality factor setting flashes.  
Press the or button 6  
repeatedly until the setting that  
you want is displayed.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Help adjusting the equalizer  
Sound Impression/problem  
Measures  
Bass sound is too weak.  
Increase bass with  
Frequency: 32 to 160 Hz  
Gain: +4 to +6  
Dirty bass.  
Booming sound.  
Reduce the lower mid level with  
Frequency: 400 Hz  
Unpleasant pressure.  
Gain: approx. -4  
Sound very much in the foreground,  
aggressive, no stereo effect.  
Reduce the mid level with  
Frequency: 1,000 to 2,500 Hz  
Gain: -4 to -6  
Dull sound.  
Little clarity.  
No brilliance to the instruments.  
Boost the treble range with  
Frequency: 6,300 to 10,000 Hz  
Gain: +2 to +4  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY  
When you have finished making your  
changes,  
Adjusting the display  
settings  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu or the DIMMER  
button G on the remote control.  
Adjusting the display  
brightness  
If your car sound system is connected  
as described in the installation instruc-  
tions, the display brightness of the in-  
ternal display switches with the head-  
lights. You can adjust the display bright-  
ness separately for night and day in  
steps ranging from 1 - 16.  
Adjusting the viewing angle  
You can adjust the display’s viewing  
angle to suit the installation position of  
the device in your vehicle.  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “DISPLAY MENU”  
appears on the display.  
Note:  
The brightness of a connected  
display can be set in the DVD set-  
up. For further details, read the  
section “DVD setup” in the “DVD  
mode” chapter.  
Press the MENU•OK button 7 or  
the DIMMER button G on the  
remote control  
Press the or button 6 re-  
peatedly until “ANGLE” appears  
on the display with the current set-  
ting.  
Press the MENU•OK button 7.  
Press the or button 6 re-  
peatedly until “DISPLAY MENU”  
appears on the display.  
Press the or button 6 to ad-  
Press the MENU•OK button 7.  
just the viewing angle.  
OR  
When you have finished making your  
changes,  
Press the DIMMER button G on  
the remote control.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
or the DIMMER button G on the  
remote control to exit the menu.  
Press the or button 6 re-  
peatedly until “DAY” or “NIGHT”  
appears on the display with the  
current setting.  
Press the or button 6 to  
switch between the brightness l  
evels.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL AUDIO SOURCES  
When you have finished making your  
changes,  
External audio sources  
In addition to the CD changer, you can  
also connect another external audio  
source equipped with a line output. If  
no CD changer is connected to the  
device, you can connect two external  
audio sources. Audio sources can, for  
example, be portable CD players, Mi-  
niDisc players or MP3 players.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Note:  
If the AUX input is switched on,  
you can select it by pressing the  
SRC button ;.  
TheAUX input must be activated in the  
menu.  
An adapter cable is needed to connect  
an external audio source instead of a  
CD changer. You can obtain this cable  
(Blaupunkt no.: 7 607 897 093) from  
your authorised Blaupunkt dealer.  
Information about where to connect an  
audio source to theAUX2 input can be  
found in the installation instructions.  
Switching the AUX input on/off  
Press the MENU•OK button 7.  
Press the or button 6  
repeatedly until “AUX MENU”  
appears on the display.  
Press the MENU•OK button 7.  
Repeatedly press the or but-  
ton 6 until “AUX2” or “AUX1”  
appears on the display.  
If a CD changer is connected, “AUX1”  
is not available.  
Use the  
buttons 6 to switch  
between the “ON” and “OFF” op-  
tions.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AMPLIFIER/SUB-OUT  
Amplifier/sub-out  
When you have finished making your  
changes,  
The car sound system provides con-  
nections that allow you to connect ex-  
ternal amplifiers. In addition, you can  
connect an amplifier to the integrated  
low-pass filter to operate a subwoofer.  
For this purpose, the amplifiers must  
be connected as described in the in-  
stallation instructions.  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
Switching the dual zone on/off  
If you connected the RC 13 H remote  
control (available as optional equip-  
ment) via an adapter, the rear loud-  
speakers are switched off. You can lis-  
ten to the audio playback from the DVD/  
CD mode via the headphone outputs  
of the RC 13 H while the driver listens  
to a different source via the front loud-  
speakers.  
Switching the internal amplifier  
on/off  
If you are using external amplifiers, you  
can switch off the device’s internal  
amplifier (“INT AMP OFF” setting).  
Note:  
Press the MENU•OK button 7.  
Please check this setting if the  
loudspeakers do not emit any  
sound.  
Press the or button 6  
repeatedly until “VARIOUS  
MENU” appears on the display.  
Press the MENU•OK button 7.  
Press the MENU•OK 7, to  
Press the or button 6 re-  
peatedly until “VARIOUS MENU”  
appears on the display.  
display the menu.  
Press the or button 6  
repeatedly until “DUAL ZONE ON”  
or “DUAL ZONE OFF” appears on  
the display.  
Press the MENU•OK 7, to dis-  
play the menu.  
Press the or button 6  
repeatedly until “INT AMP ON” or  
"INT AMP OFF" appears on the  
display.  
Use the  
buttons 6 to choose  
between “DUAL ZONE ON” and  
“DUAL ZONE OFF”.  
When you have finished making your  
changes,  
Use the  
buttons 6 to choose  
between “INT AMP ON” and “INT  
press the MENU•OK button 7  
and then the DIS•ESC button 5  
to exit the menu.  
AMP OFF”.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
FM mono sensitivity:  
17 dbf  
Specifications  
Amplifier  
Output power:  
FM frequency response:  
18 W RMS x 4 ch  
@ 14.4V  
35 - 16,000 Hz  
@ 4 Ohm  
@ 1% THD  
DVD  
Supported formats:  
Tuner  
Wavebands in the US:  
FM:  
DVD±R,  
DVD±RW,  
SVCD, VCD,  
JPEG.  
87.5 - 107.9 MHz  
(200 kHz step)  
530 - 1710 kHz  
(10 kHz step)  
Dolby Digital Coaxial™ output  
AM:  
Video output  
PAL/NTSC support  
Wavebands in Europe:  
FM:  
87.5 - 108 MHz  
CD  
(100 kHz step  
auto/50 kHz  
manual)  
531 - 1602 kHz  
(9 kHz step)  
Supported formats:  
CD,  
CD-R,  
CD-RW.  
AM:  
Frequency response:  
20 - 20,000 Hz  
Wavebands in Thailand:  
Pre-amp out  
FM:  
87.5 - 108 MHz  
(50 kHz step auto/  
25 kHz step  
manual)  
531 - 1602 kHz  
(9 kHz step)  
4 channels:  
2 V  
Input sensitivity  
AUX input: 2 V / 6 k  
AM:  
Tel./Navi input: 10 V / 1 kΩ  
Wavebands in South America:  
FM:  
87.5 - 107.9 MHz  
(100 kHz step auto/  
50 kHz step  
manual)  
AM:  
530 - 1710 kHz  
(10 kHz step)  
Subject to changes!  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please keep the filled-in radio pass in a safe place!  
Prière de conserver soigneusement la carte d’autoradio  
remplie !  
¡Favor guardar el documento del aparato debidamente  
llenado en un lugar seguro!  
Por favor, guardar o cartão preenchido do aparelho num  
lugar seguro!  
257  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
Austria  
Belgium  
Denmark  
Finland  
France  
(D)  
(A)  
(B)  
0180-5000225  
01-610 39 0  
02-525 5444  
05121-49 4002  
01-610 39 391  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
210 94 12 711  
01-46 66 706  
02-369 62464  
40 2085  
(DK) 44-898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 210 94 27 337  
(IRL) 01-46 66 700  
(I)  
02-369 62331  
40 4078  
Luxembourg (L)  
Netherlands (NL) 0800 400 1010  
0800 400 1040  
66-817 157  
2185 00165  
Norway  
Portugal  
Spain  
(N)  
(P)  
(E)  
(S)  
66-817 000  
2185 00144  
902 52 77 70  
08-7501850  
91 410 4078  
08-7501810  
01-8471650  
02-6130 0514  
76 511 809  
022-8771260  
0212-346 00 40  
708-6817188  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ) 02-6130 0446  
Hungary  
Poland  
Turkey  
USA  
Brasil  
(H)  
76 511 803  
(PL) 0800-118922  
(TR) 0212-335 06 71  
(USA) 800-2662528  
(Mercosur)  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
(BR) 0800 7045446  
+55-19 3745 2773  
+604-6413 640  
Gerätepass  
Long Beach DVD35  
....................................................  
Name:  
Typ:  
7 645 680 310  
....................................................  
Serien-Nr: BP ...............................................  
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim  
07/05 - CM/ASA  
(gb, fr, es, pt)  
8622404324  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Decker Trimmer LHT120 User Manual
Bosch Appliances Headphones VMH 300 User Manual
Boss Audio Systems Car Amplifier CX1000 User Manual
Bowers Wilkins Portable Speaker 801D User Manual
Cadco Range PHR 1C User Manual
Campbell Hausfeld Air Compressor VT640700 User Manual
Canon Camera Flash 430 EZ User Manual
Casio Electronic Keyboard CTK 2100 User Manual
Casio Watch 2326 User Manual
Cecilware Hot Beverage Maker GB IT User Manual