Radio / CD
Miami Beach CD51
Tampa Bay CD51
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
2
6
4
1
3
7
8
9
5
11 10
13 12
16 15
14
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
1
button – to unlock the
removable control panel (release
panel)
;
OK button – confirms menu
entries and starts the scan func-
tion
2
3
Volume control
Button – switches the unit on/off,
volume mute
FM button – selects the radio
mode source,
selects the FM memory levels
<
=
X-BASS button – to set the
X-Bass feature
AUDIO button (audio) – adjusts
the bass, treble, balance and
fader
Keys 1 - 6
TS button – starts the Travel-
4
5
>
?
AM button – selects the radio
mode source,
store function
selects the AM frequency range
Display
button – displays the time,
DIS – changes the display con-
tent
@
CD•C button – to switch be-
tween CD, CD changer (if con-
nected) and AUX sources
6
7
8
9
:
MENU button – opens the basic
settings menu
button – opens the flip-
release panel
Arrow buttons
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Scanning tracks (SCAN) ............... 14
Repeating tracks (REPEAT) ........... 14
Pausing playback (PAUSE)............ 14
Changing the display ..................... 15
Ejecting a CD................................ 15
Notes and accessories ............ 6
Road safety ..................................... 6
Installation ....................................... 6
Accessories .................................... 6
International telephone information... 6
CD changer mode.................. 15
Switching to CD changer mode..... 15
Selecting a CD.............................. 15
Selecting tracks ............................ 15
Quick track selection ..................... 15
Fast searching (audible) ................ 15
Changing the display ..................... 16
Repeating individual tracks or
whole CDs (REPEAT).................... 16
Random play (MIX) ........................ 16
Scanning all tracks on all CDs
(SCAN) ......................................... 16
Pausing playback (PAUSE)............ 17
Removable control panel ......... 7
Switching on/off ...................... 8
Adjusting the volume ............... 9
Setting the power-on volume ........... 9
Instantaneous volume reduction
(mute) ............................................. 9
Telephone audio / navigation audio .. 9
Setting the volume of the
confirmation beep.......................... 10
Radio mode............................ 11
Switching to radio mode ................ 11
Selecting the frequency range /
memory ......................................... 11
Tuning into a station ....................... 11
Storing stations ............................. 11
Storing stations automatically
(Travelstore) .................................. 12
Listening to preset stations ............ 12
Scanning receivable stations
(SCAN) ......................................... 12
Setting the scantime ...................... 12
Tuner configuration ........................ 12
CLOCK - Time ........................ 17
Sound and
volume distribution settings .. 19
Adjusting the bass settings ............ 19
Adjusting the treble settings........... 19
Setting the left/right volume
distribution (balance) ..................... 19
Setting the front/back volume
distribution (fader) ......................... 19
Setting the display ......................... 13 X-BASS .................................. 20
CD mode ................................ 13 Setting the spectrometer....... 20
Switching to CD mode .................. 13
Selecting tracks ............................ 14
Quick track selection ..................... 14
External audio sources .......... 21
Specifications ........................ 21
Fast searching (audible) ................ 14
Random play (MIX) ........................ 14
Guarantee .............................. 22
Installation instructions .......... 80
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES AND ACCESSORIES
Thank you for deciding to purchase a
Accessories
Only use accessories approved by Blau-
punkt.
Blaupunkt product. We hope you enjoy
using this new piece of equipment.
Before using the device for the first time,
please read these instructions careful- Remote control
ly. The Blaupunkt editors are constant-
The optional RC08 or RC10 remote
ly working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the unit
please contact your dealer or the tele-
phone hotline for your country. You will
find the hotline telephone numbers print-
ed at the back of this booklet.
controls allow you to safely and conve-
niently access the most important func-
tions of your car radio from your steer-
ing wheel.
The RC 06 H remote control is supplied
with the Tampa Bay CD51.
Amplifier
All Blaupunkt amplifiers can be used.
Road safety
CD changer
Road safety has absolute prior-
ity. Only operate your car radio if the
road and traffic conditions allow you
to do so. Familiarise yourself with the
unit before setting off on your jour-
ney.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, set the
volume of whatever you are listen-
ing to to a reasonable level.
You can connect the following Blaupunkt
CD changers:
CDC A 06, CDC A 08, CDC A 072 and
IDC A09.
You can also connect the CDC A05 and
CDC A 071 CD changers by using an
adapter cable (Blaupunkt no.: 7 607 889
093).
International telephone
information
Installation
If you have any questions regarding the
operation of your car radio or if you re-
quire further information, please do not
hesitate to call us!
The information hotline numbers are
printed on the last page of these instruc-
tions.
If you want to install your car radio your-
self, please read the installation and
connection instructions that follow these
operating instructions.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVABLE CONTROL PANEL
● Press the
button 1.
Removable control panel
The control panel locking mechanism
opens.
Theft protection
As a way of protecting your car radio
against theft, the unit is equipped with
a removable control panel (flip-release
panel). Without this control panel, the
car radio is worthless to a thief.
Protect your car radio against theft by
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.
● First, pull the control panel straight
off the unit and then out towards
the left.
● The unit switches off after the con-
trol panel is removed.
● All the current settings are saved.
● Any CD already inserted in the unit
remains there.
The control panel has been designed
to be easy to use.
Attaching the control panel
● Slide the control panel from left to
right into the unit’s panel locking
mechanism.
Note:
● Never drop the control panel.
● Never expose the control panel
to direct sunlight or other heat
sources.
● Press the left-hand edge of the
control panel into the unit until it
clicks into place.
● Store the control panel in the sup-
plied case.
● Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth soaked in cleaning
spirits.
Removing the control panel
Note:
● When attaching the control panel,
make sure you do not press the
display.
1
If the unit was still switched on when
you removed the control panel, the unit
will automatically switch on with the last
settings activated (i.e. radio, CD, CD
changer, or AUX) when the panel is re-
placed.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING ON/OFF
Switching on/off
There are various ways of switching the
unit on/off:
Switching on by inserting a CD
If the unit is switched off and there is no
CD inserted in the drive,
● press the
button 9.
Switching on/off using the vehicle
ignition
The flip-release panel opens.
● Gently insert the CD with the print-
ed side uppermost into the drive
until you feel some resistance.
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button 3, it will switch on/off
simultaneously with the ignition.
The CD will be drawn automatically into
You can switch the unit on even if the the drive.
ignition is off:
You must not hinder or assist the drive
as it draws in the CD.
● To do so, press button 3.
● Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
Note:
● To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
The unit switches on. CD playback be-
gins.
Switching on/off using the
removable control panel
● Remove the control panel.
The unit switches off.
● Attach the control panel again.
The unit switches on. The last settings
(radio, CD, CD changer orAUX) will be
reactivated.
Switching on/off using button 3
● To switch the unit on, press button
3.
● To switch the unit off, press button
3 for longer than two seconds.
The unit switches off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
Instantaneous volume reduction
(mute)
This feature allows you to instanta-
neously reduce (mute) the volume to a
level preset by you.
Adjusting the volume
The volume can be adjusted in steps
from 0 (off) to 66 (maximum).
● To increase the volume, turn the
volume control 2 to the right.
● Briefly press button 3.
● To decrease the volume, turn the
volume control 2 to the left.
“MUTE” appears in the display.
Setting the mute level
Setting the power-on volume
You can set the unit’s mute volume lev-
el.
You can set the unit’s default power-on
volume.
● Press the MENU button 8.
● Press the MENU button 8.
● Keep pressing the or button
: until “MUTE LEVEL” appears in
the display.
● Keep pressing the or button
: until “ON VOLUME” appears in
the display.
● Set the mute level using the and
buttons :.
● Set the power-on volume using the
and buttons :.
When you have finished making your
changes,
If you change the setting to “0”, the pow-
er-on volume will be the same as the
volume level that was set before the unit
was last switched off.
● press the MENU button 8 or OK
; twice.
Note:
Telephone audio / navigation
audio
● To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
when the unit was switched off, the
volume will be reset to “38” when
the unit is switched on again.
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
the manner described in the installation
instructions.
When you have finished making your
changes,
● press the MENU button 8 or OK
; twice.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car radio.
● Set the volume using the and
buttons :. “0” means beep off, “9”
means maximum beep volume.
You can set the volume level at which
telephone calls and the navigation voice
output will first be heard.
When you have finished making your
changes,
● press the MENU button 8 or OK
;.
● Press the MENU button 8.
● Keep pressing the or button
: until “TEL/NAVI VOL” appears
in the display.
● Set the required volume using the
and buttons :.
When you have finished making your
changes,
● press the MENU button 8 or OK
; twice.
Note:
● Using the volume control 2, you
can directly adjust the volume of
telephone calls and navigation
voice output (whilst they are being
heard).
Setting the volume of the
confirmation beep
For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds.
For instance, after storing a radio sta-
tion to a station button you will hear a
confirmation beep. You can set the vol-
ume of this beep.
● Press the MENU button 8.
● Keep pressing the or button
: until “BEEP” appears in the dis-
play.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Setting the sensitivity for station
seek tuning
Radio mode
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
● press the FM 4 / AM 5 button
● Press the MENU button 8.
or
● Keep pressing the or button
: until “SENS HI” or “SENS LO”
appears in the display.
● keep pressing the CD•C button @
until “RADIO” appears in the dis-
play.
“SENS HI” means that the tuner is highly
sensitive. “SENS LO” means it is set to
the lowest sensitivity setting. If “SENS
LO” is selected, “lo” lights up in the dis-
play.
Selecting the frequency range /
memory
This unit can receive programmes
broadcast over the FM andAM frequen-
cy ranges.There are three preset mem-
ory levels for the FM range and one for
theAM range. Six stations can be stored
on each memory level.
● Set the required sensitivity using
the and buttons :.
When you have finished making your
changes,
Selecting the FM memory level
● press the MENU button 8 or OK
;.
● Press the FM button 4 to switch
between the FM memory levels
(FM1, FM2 and FMT).
Tuning into stations manually
You can also tune into stations manually.
● Press the or button :.
Selecting the AM frequency range
● Press the AM button 5 to select
the AM frequency range.
Storing stations
Tuning into a station
Storing stations manually
There are various ways of tuning into a
station.
● Select the required memory level
(FM1, FM2 or FMT) or the AM fre-
quency range.
Automatic seek tuning
● Tune into the station.
● Press the or button :.
● Press one of the station buttons 1-
6 > for longer than one second to
store the station to that button.
The unit tunes into the next receivable
station.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Stopping SCAN and continuing
listening to a station
Storing stations automatically
(Travelstore)
● Press the OK button ;.
Scanning is stopped and the station that
was tuned into last will remain active.
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT or AM memory depending on the
selected frequency range.
Setting the scantime
● Press the MENU button 8.
Note:
● Stations that were previously
stored in this memory are deleted
in the process.
● Keep pressing the or button
: until “SCANTIME” appears in
the display.
● Briefly press the TS button ?.
● Set the required scantime using
the and buttons :.
When you have finished making your
changes,
The station storing procedure begins.
“TRAVEL-STORE” appears in the dis-
play.After the process is completed, the
station that is stored in location 1 of the
respective memory level will be played.
● press the MENU button 8 or OK
; twice.
Listening to preset stations
Note:
● Select the memory level on which
● The set scantime also applies to
scanning in CD and CD changer
mode.
the station was stored.
● Press the preset station button 1-6
> of the station you want to listen
to.
Tuner configuration
This unit is equipped with a multiband
tuner. The tuner can be configured to
suit the requirements that are specific
to various countries. The countries/re-
gions available are: America, Europe,
Asia and Thailand. The tuner will only
function optimally if it is configured for
the country/region in which the unit is
being operated.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations. You can set the scanning time
to between 5 and 30 seconds in the
menu.
Starting SCAN
● Keep the OK button ; pressed
Configuring the tuner
until the scan process starts.
● Press the MENU button 8.
“SCAN” appears briefly in the display
followed by the current frequency (which
flashes).
● Keep pressing the or button
: until “FM TUNER” appears in
the display.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
CD MODE
● Press the or button : to set
CD mode
You can use this unit to play standard
CDs with a diameter of 5 inches.
the country/region.
When you have finished making your
changes,
Risk of damage to the CD drive!
CD singles with a diameter of 3 inch-
es and contoured CDs (shape CDs)
are not suitable for playback in this
unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
● press the MENU button 8 or OK
; twice.
Note:
● Once you have configured the tun-
er, the unit will switch to radio
mode and tune into the preset fre-
quency 87.5 MHz
Setting the display
Switching to CD mode
● If there is no CD inserted in the
In radio mode, you have the option of
continuously displaying the time or con-
tinuously displaying the frequency.
drive,
● Keep the
/ DIS button 7
pressed until the required display
● press the
The flip-release panel opens.
button 9.
appears.
● Gently insert the CD with the print-
ed side uppermost into the drive
until you feel some resistance.
The CD is drawn into the drive automat-
ically.
You must not hinder or assist the drive
as it draws in the CD.
● Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
CD playback begins.
● If a CD is already inserted in the
drive.
● Keep pressing the CD•C button @
until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
Note:
Selecting tracks
● You can set the scantime. For fur-
ther details, please read the sec-
tion entitled “Setting the scantime”
in the “Radio mode” chapter.
● Press one of the arrow buttons :
to select the next or previous track.
If you press the or button : once,
the current track will be played again
from the beginning.
Stopping SCAN and continuing
playback
Quick track selection
To quickly select tracks backwards or
forwards,
● To stop scanning, press the OK
button ;.
The current track will then continue to
be played.
● keep one of the or buttons :
pressed until fast-reverse / fast-for-
ward track selection begins.
Repeating tracks (REPEAT)
● If you want to repeat a track, press
button 4 RPT >.
“REPEAT TRCK” appears briefly in the
display and the RPT symbol lights up.
The track is repeated until you deacti-
vate RPT.
Fast searching (audible)
To fast search backwards or forwards,
● keep one of the
buttons :
pressed until fast reversing / fast
forwarding begins.
Random play (MIX)
Cancelling repeat
● Press button 5 MIX >.
● If you want to stop the repeat func-
tion, press button 4 RPT > again.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next “REPEAT OFF” appears briefly in the
randomly selected track will then be display and the RPT symbol disappears.
played.
Normal playback is then continued.
Stopping MIX
Pausing playback (PAUSE)
● Press button 3 >.
● Press button 5 MIX > again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
“PAUSE” appears in the display.
Cancelling pause
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
● Press button 3 > while in
pause mode.
Playback is continued.
● Press the OK button ; for longer
than two seconds. The next track
will then be played briefly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
CD CHANGER MODE
Changing the display
CD changer mode
● To switch between the track num-
ber and clock display / track num-
ber and playing time display, press
Note:
● Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
the
/ DIS button 7 once or sev-
eral times for longer than two sec-
onds until the required display ap-
pears.
Switching to CD changer mode
Ejecting a CD
● Keep pressing the CD•C button @
until “CHANGER” appears in the
display.
● Press the
button (9).
The flip-release panel opens and the CD
is ejected.
Playback begins with the first CD that
the CD changer detects.
● Remove the CD and close the con-
trol panel.
Selecting a CD
● To move up/down from one CD to
another, press the or button
: once or several times.
Selecting tracks
● To move up/down from one track to
another on the current CD, press
the or button : once or sev-
eral times.
Quick track selection
To quickly select tracks backwards or
forwards,
● keep one of the or buttons :
pressed until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
● keep one of the
buttons :
pressed until fast reversing / fast
forwarding begins.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
“MIXALL” appears briefly and MIX lights
up in the display.
Changing the display
● To switch between the track num-
ber and clock display / track num-
ber and playing time display / CD
number and track number display,
press the / DIS button 7 once
or several times for longer than two
seconds until the required display
appears.
Note:
● In the case of the CDC A 08 and
the IDC A 09, all the CDs in the
changer are selected randomly. In
the case of any other changer, all
the tracks on one CD are played
randomly before the next CD in the
changer is played.
Repeating individual tracks or
whole CDs (REPEAT)
● If you wish to repeat the current
track, briefly press button 4 RPT
>.
Stopping MIX
● Press button 5 MIX > until
“MIX OFF” appears briefly in the
display and MIX disappears.
Scanning all tracks on all CDs
(SCAN)
“REPEAT TRCK” appears briefly and
RPT lights up in the display.
● If you wish to repeat the current
CD, press button 4 RPT > again.
“REPEAT DISC” appears briefly and
RPT lights up in the display.
● To briefly play all the tracks on all
inserted CDs in ascending order,
press the OK button ; for longer
than two seconds.
“SCAN” appears in the display.
Cancelling repeat
Stopping SCAN
● If you want to stop the repeat func-
tion for the current track or CD,
press button 4 RPT > until
● To stop scanning, briefly press the
OK button ;.
“REPEAT OFF” appears briefly in
the display and RPT disappears.
The current track will then continue to
be played.
Random play (MIX)
Note:
● You can set the scantime. For fur-
ther details, please read the sec-
tion entitled “Setting the scantime”
in the “Radio mode” chapter.
● To play all the tracks on the current
CD in random order, briefly press
button 5 MIX >.
“MIX CD” appears briefly and MIX lights
up in the display.
● To play the tracks on all the insert-
ed CDs in random order, press but-
ton 5 MIX > again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
CLOCK - TIME
Pausing playback (PAUSE)
CLOCK - Time
● Press button 3 >.
“PAUSE” appears in the display.
Briefly displaying the time
● To display the time, briefly press
the
/ DIS button 7.
Cancelling pause
● Press button 3 > while in
Setting the time
pause mode.
Setting the time manually
Playback is continued.
● To set the time, press the MENU
button 8.
● Keep pressing the or button
: until “CLOCKSET” appears in
the display.
● Press the button :.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
● Adjust the minutes using the
buttons :.
● Once you have set the minutes,
press the button :. The hours
start flashing.
● Adjust the hours using the
buttons :.
● Press the MENU button 8 or OK
; twice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK - TIME
Selecting 12/24-hour clock
mode
Briefly displaying the time when
the unit is switched off
To briefly display the time when the unit
is off,
● Press the MENU button 8.
“MENU” appears in the display.
● press the
/ DIS button 7.
● Keep pressing the or button
: until “24 H MODE” or “12 H
MODE” appears in the display.
The time is displayed for eight seconds.
● Press the or button : to
switch between the modes.
When you have finished making your
changes,
● press the MENU button 8 or OK
;.
Displaying the time continuously
when the unit is off and the
ignition is on
To display the time when the unit is off
and the vehicle ignition is on,
● press the MENU button 8.
● Keep pressing the or button
: until “CLK DISP OFF” or “CLK
DISP ON” appears in the display.
● Press the or button : to
switch between the ON/OFF set-
tings.
When you have finished making your
changes,
● press the MENU button 8 or OK
;.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND AND VOLUME DISTRIBUTION SETTINGS
Setting the left/right volume
distribution (balance)
Sound and volume
distribution settings
● To set the left/right volume distribu-
tion (balance), press the AUDIO
button =.
You can adjust the sound and volume
distribution settings separately for each
source (radio, CD, CD changer and
AUX).
“BASS” appears in the display.
● Keep pressing the button : un-
til “BALANCE” appears in the dis-
play.
Adjusting the bass settings
● Press the AUDIO button =.
“BASS” appears in the display.
● Press the or button : to
● Press the or button : to ad-
adjust the balance (right/left).
just the bass.
When you have finished making your
changes,
When you have finished making your
changes,
● press the AUDIO button =.
● press the AUDIO button =.
Setting the front/back volume
distribution (fader)
Adjusting the treble settings
● Press the AUDIO button =.
“BASS” appears in the display.
● To set the front/back volume distri-
bution (fader), press the AUDIO
button =.
● Keep pressing the button :
until “TREBLE” appears in the dis-
play.
“BASS” appears in the display.
● Keep pressing the button : un-
● Press the or button : to ad-
til “FADER” appears in the display.
just the treble.
● Press the or button : to ad-
When you have finished making your
changes,
just the fader (front/back).
When you have finished making your
changes,
● press the AUDIO button =.
● press the AUDIO button =.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
X-BASS
X-BASS
SPECTROMETER
Setting the spectrometer
The X-BASS feature can be used to
boost the bass at low volume levels.
The spectrometer (level display) briefly
provides a symbolic display of the vol-
ume and the audio control settings
whilst you are adjusting them.
Adjusting the X-BASS boost
settings
The X-BASS boost can be set in steps
from “X-BASS LOW” to “X-BASS MID”
to “X-BASS HIGH”.
When you are not changing any set-
tings, the spectrometer displays the car
radio’s output level.
You can set the type of spectrometer in
the menu.
● Press the X-BASS button <.
There are two types available.
● Keep pressing the or button
: until the required setting ap-
pears in the display.
Setting the spectrometer type
● Press the MENU button 8.
“MENU” appears in the display.
When you have finished making your
changes,
● press the X-BASS button <.
● Keep pressing the or button
: until “EQ DISPLAY” appears in
the display.
● Press the or button : to
select “SPECTRUM 1”,
“SPECTRUM 2” or “EQ DISP OFF.”
When you have finished making your
changes,
● press the MENU button 8 or OK
; twice.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL AUDIO SOURCES
External audio sources
SPECIFICATIONS
Specifications
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. The audio
source, for example, can be a portable
CD player, MiniDisc player or MP3 play-
er.
Amplifier
Output power:
4 x 25 watts sine in
accordance with
DIN 45 324 at
14.4 V
4 x 50 watts max.
power
TheAUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this adapter ca-
ble (BP no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Tuner
Frequency ranges US:
FM:
AM:
87.5 – 107.9 MHz
530 – 1710 kHz
Frequency ranges Asia and Europe:
Switching the AUX input on/off
FM:
AM:
87.5 – 108 MHz
531 – 1602 kHz
● Press the MENU button 8.
“MENU” appears in the display.
Frequency ranges Thailand:
● Keep pressing the or button
: until “AUX-IN-1 OFF” or “AUX-
IN-1 ON” appears in the display.
FM:
AM:
87.5 – 108 MHz
531 – 1629 kHz
● Press the or button : to
FM mono sensitivity:
17 dbf
switch AUX on/off.
When you have finished making your
changes,
FM frequency response:
35 - 16,000 Hz
● press the MENU button 8 or OK
;.
CD
Frequency response:
Note:
20 - 20,000 Hz
● If the AUX input is switched on it
can be selected by pressing the
CD•C button @.
Pre-amp out
4 channels:
3 V
Input sensitivity
AUX input:
Tel./Navi input:
2 V / 6 kΩ
10 V/ 1 kΩ
Subject to changes!
21
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
Guarantee
The scope of the guarantee is orientat-
ed around the regulations in force with-
in the country in which the unit was pur-
chased.
If your unit develops a fault, please con-
tact your dealer and present the pur-
chase receipt.
If the statutory guarantee period in your
country is less than 12 months, Blau-
punkt will grant a 12-month manufac-
turer’s guarantee. This guarantee does
not cover damage due to wear, incor-
rect usage or commercial use.
If you wish to enforce a claim under the
manufacturer’s guarantee that is provid-
ed by Blaupunkt, please send the faulty
unit together with the purchase receipt
to the Blaupunkt customer service cen-
tre in your country. You can find out
which address is closest to you by con-
tacting the telephone hotline listed on
the back page of this booklet. Blaupunkt
retains the right to rectify defects or sup-
ply a replacement.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|