Radio / CD
Alicante CD31
Essen CD31
Lausanne CD31
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING ELEMENTS
1
2
button to release the control
panel.
8
AUDIO button to adjust the
bass, treble, balance and fader
settings.
FMT button (Essen CD31) to se-
lect the FM memory levels,
to switch to radio mode,
9
:
Arrow buttons.
MENU button to open the basic
settings menus.
to start the Travelstore function.
BAND button (Alicante CD31
and Lausanne CD31),
to select the FM memory levels
and MW / LW frequency range,
to switch to radio mode,
TS, to start the Travelstore func-
tion.
RDS button to switch the RDS
feature on/off.
To display scrolling text.
button to display the time.
;
<
Keys 1 - 5.
TRAF button to switch traffic in-
formation standby on/off.
PTY, to switch the PTY function
on/off.
Volume control.
, to increase the volume
, to decrease the volume
=
>
3
4
Button to switch the unit on/off.
To mute the unit’s volume.
SCAN button to start the scan
function.
5
6
CD compartment.
X-BASS button for the X-Bass
function.
7
CD eject.
CD•C button to select CD, radio
and CD changer (if connected)
sources.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Notes and accessories .......... 27 CD mode ................................ 38
Road safety ................................... 27 Switching to CD mode .................. 38
Installation ..................................... 27 Selecting tracks ............................ 38
Accessories .................................. 27 Quick track selection ..................... 38
Fast searching (audible) ................ 38
Random play (MIX) ........................ 38
Scanning tracks (SCAN) ............... 38
Removable control panel ....... 28
Switching on/off .................... 29
Repeating tracks (REPEAT) ........... 39
Pausing playback (PAUSE)............ 39
Changing the display ..................... 39
Removing the CD from the unit...... 39
Adjusting the volume ............. 30
Setting the power-on volume ......... 30
Instantaneous volume reduction
(mute) ........................................... 30
Mute during telephone operation ... 30
Confirmation beep......................... 31
CD changer mode.................. 40
Switching to CD changer mode..... 40
Selecting a CD.............................. 40
Selecting tracks ............................ 40
Quick track selection ..................... 40
Fast searching (audible) ................ 40
Changing the display ..................... 40
Repeating individual tracks or
whole CDs (REPEAT).................... 40
Random play (MIX) ........................ 41
Scanning all tracks on all CDs
(SCAN) ......................................... 41
Pausing playback (PAUSE)............ 41
Radio mode............................ 32
Switching to radio mode ................ 32
Changing the display ..................... 32
RDS functions (AF, REG) .............. 32
Selecting the frequency range /
memory ......................................... 33
Tuning into a station....................... 33
Setting the sensitivity of the station
search mode ................................. 33
Storing stations ............................. 34
Storing stations automatically
(Travelstore) .................................. 34
Switching to preset stations........... 34
Scanning receivable stations
(SCAN) ......................................... 34
Setting the scantime ...................... 35
Programme type (PTY) .................. 35
Treble reduction feature during
CLOCK - Time ........................ 42
Sound..................................... 43
Adjusting the bass settings ............ 43
Adjusting the treble settings........... 43
Volume distribution ................ 43
Adjusting the balance settings ....... 43
interference (HICUT) ..................... 36 Adjusting the fader settings ........... 43
Traffic information reception . 37 X-BASS .................................. 44
Switching traffic information
priority on/off ................................. 37
Setting the traffic announcement
External audio sources .......... 44
Specifications ........................ 45
volume .......................................... 37
Guarantee .............................. 45
Installation instructions........ 172
26
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES AND ACCESSORIES
Thank you for deciding to purchase a
Blaupunkt product. We hope you enjoy
using this new piece of equipment.
Before using the device for the first time,
please read these instructions carefully.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the unit
please contact your dealer or the tele-
phone hotline for your country.You will
find the hotline telephone numbers print-
ed at the back of this booklet.
Accessories
Only use accessories approved by Blau-
punkt.
Remote control
The optional RC 08 or RC 10 remote
controls allow you to safely and conven-
iently access the most important func-
tions of your car radio from your steer-
ing wheel.
CD changer
You can connect the following Blaupunkt
CD changers:
CDC A 06, CDC A 08, CDC A 072 and
IDC A 09.
Road safety
Road safety has absolute prior-
ity. Only operate your car radio if the
road and traffic conditions allow you
to do so.Familiarise yourself with the
unit before setting off on your jour-
ney.
You can also connect the CDC A 05 and
CDC A 071 CD changers by using an
adapter cable (Blaupunkt no.7 607 889
093).
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, set the
volume of whatever you are listen-
ing to to a reasonable level.
Installation
If you want to install your car radio your-
self, please read the installation and
connection instructions that follow these
operating instructions.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVABLE CONTROL PANEL
G Press the
button 1.
Removable control panel
The control panel locking mechanism
opens.
Theft protection
As a way of protecting your car radio
against theft, the unit is equipped with
a removable control panel (release pan-
el). Without this control panel, the car
radio is worthless to a thief.
Protect you car radio against theft by
taking the control panel with you every
time you leave your vehicle.Do not leave
the control panel in your vehicle - not
even in a hiding place.
G First, pull the control panel straight
off the unit and then out towards
the left.
G The unit switches off after the con-
trol panel is removed.
G All the current settings are saved.
G Any CD already inserted in the unit
remains there.
The control panel has been designed
to be easy to use.
Attaching the control panel
G Slide the control panel from left to
right into the unit’s panel locking
mechanism.
Note:
G Never drop the control panel.
G Never expose the control panel to
direct sunlight or other heat sourc-
es.
G Press the left-hand edge of the
control panel into the unit until it
clicks into place.
G Store the control panel in the sup-
plied case (Alicante CD31 only).
G Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth soaked in cleaning
spirits.
Removing the control panel
Note:
G When attaching the control panel,
make sure you do not press the
display.
1
If the device was switched on when the
panel was removed, it will switch itself
back on automatically with the last set-
tings (radio, CD, CD-changer or AUX)
as soon as the panel is replaced.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING ON/OFF
Switching on by inserting a CD
Switching on/off
If the unit is switched off and there is no
CD inserted in the drive,
There are various ways of switching the
unit on/off:
G Gently insert the CD with the print-
ed side uppermost into the drive
until you feel some resistance.
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button >, it will switch on/off
simultaneously with the ignition.
The CD will be drawn automatically into
the drive.
You must not hinder or assist the drive
as it draws in the CD.
You can also switch the unit on even if
the ignition is off:
The unit switches on. CD playback be-
gins.
G To do so, press button >.
Note:
G To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
Switching on/off using the
removable control panel
G Remove the control panel.
The unit switches off.
G Attach the control panel again.
The unit switches on. The last settings
(radio, CD, CD changer or AUX) will be
reactivated.
Switching on/off using button >
G To switch the unit on, press button
>.
G To switch the unit off, press button
> for longer than two seconds.
The unit switches off.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
Adjusting the volume
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
Instantaneous volume reduction
(mute)
This feature allows you to instantane-
ously reduce (mute) the volume to a lev-
el preset by you.
To increase the system volume,
G press the button =.
To decrease the system volume,
G press the button =.
G Briefly press button >.
“MUTE” appears in the display.
Setting the mute level
Setting the power-on volume
You can set the default volume at which
the unit switches on.
You can set the unit’s mute volume lev-
el.
G Press the MENU button :.
G Press the MENU button :.
G Keep pressing the or button
9 until “MUTE LVL” appears in the
display.
G Keep pressing the or button
9 until “ON VOL” appears in the
display.
G Set the mute level using the and
buttons 9.
G Set the power-on volume using the
and buttons 9.
When you have finished making your
changes,
To help you adjust the volume more
easily, the volume will be increased /
decreased as you make your changes.
G press the MENU button : twice.
If you change the setting to“0”, the pow-
er-on volume will be the same as the
volume level that was set before the unit
was last switched off.
Mute during telephone
operation
If your car audio system has been
equipped with a mobile telephone, it will
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
Note:
G To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
when the unit was switched off, the
volume will be reset to “38” when
the unit is switched on again.
The car audio system will be muted to
the mute level selected.
When you have finished making your
changes,
G press the MENU button : twice.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
Confirmation beep
For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds.
For instance, after storing a radio sta-
tion to a station button you will hear a
confirmation beep. The beep can be
switched on/off.
G Press the MENU button :.
G Keep pressing the or button
9 until “BEEP” appears in the dis-
play.
G Use the and buttons 9 to
switch between the options.
“OFF”means beep off, “ON”means the
beep is switched on.
G Press the MENU button :.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Radio mode
This unit is equipped with an RDS radio
receiver.Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
transmitting different programme
content.
Note:
G REG must be separately activated/
The station name appears in the dis-
play as soon as it is received.
deactivated in the menu.
Switching REG on/off
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
G Press the MENU button :.
G Keep pressing the or button
9 until “REG” appears in the dis-
play.
G press the FMT or BAND (TS) but-
ton 2.
“OFF” or “ON” is displayed alongside
“REG”.
Or
To switch REG on/off,
G keep pressing the CD•C button 7
until “RADIO” appears in the dis-
play.
G press the or button 9.
G Press the MENU button :.
Changing the display
To briefly display the time,
Switching the RDS function on/off
To use the RDS functions (AF and
REG),
G keep the MENU ( ) button :
pressed until the time appears in
the display.
G press the RDS button 3.
The RDS functions are active when
“RDS”lights up in the display.When the
RDS functions (AF, REG)
The RDS functions AF (Alternative Fre- RDS functions are switched on, “REG
quency) and REG (Regional) extend ON” or “REG OFF” appears briefly in
your radio’s range of functions.
the display.
G AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
G REG: At certain times, some radio
stations divide their programme
into regional programmes providing
different regional content. You can
32
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Selecting the frequency range /
memory
Setting the sensitivity of the
station search mode
This unit can receive programmes You can configure the radio to only tune
broadcast over the FM, MW and LW fre- into stations with a strong reception or
quency ranges.
to also tune into those with a weak re-
ception.
Note:
G Press the MENU button :.
G The MW and LW frequency ranges
are not available on the Essen
CD31.
G Keep pressing the or button
9 until “SENS” appears in the dis-
play.
There are three preset memory levels
for the FM range and one for each of
the MW and LW ranges. Five stations
can be stored on each memory level.
G Press the button 9.
The display shows the currently set val-
ue for sensitivity.“SENS HI6”means that
the tuner is highly sensitive.“SENS LO1”
means it is set to the lowest sensitivity
setting.
Selecting the memory level
To switch between the FM memory lev-
els and the MW and LW frequency rang-
es,
If “SENS LO” is selected, “lo” lights up
in the display.
G keep pressing the FMT or BAND
(TS) button 2 until the required
frequency range / memory level is
displayed.
G Set the required sensitivity using
the and buttons 9.
G Press the MENU button :.
Tuning into a station
There are various ways of tuning into a
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Automatic seek tuning
Note:
G Press the or button 9.
G You can only tune into stations
manually if the RDS function is de-
activated.
The unit tunes into the next receivable
station.
G Press the or button 9.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Note:
The station storing procedure begins.
“T-STORE” appears in the display.After
the process is completed, the station
stored in FMT memory location 1 will
be played.
G If you want to use this feature, the
RDS function must be activated.
G Press the or button 9 to
switch to the next station on the
broadcasting network.
Switching to preset stations
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use either the Travelstore function or
allow the automatic seek tuning feature
to run once through the entire frequen-
cy range.
G Select the memory level on which
the station was stored.
G Press the preset station button of
the station you want to listen to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations.You can set the scanning time
to between 5 and 30 seconds in the
menu.
Storing stations
Storing stations manually
G Select the required FM1 / FM2 /
FMT memory or MW / LW frequen-
cy range (MW and LW are not
available on the Essen CD31).
Starting SCAN
G Press the SCAN button 4.
G Tune into the station.
Scanning begins.“SCAN”appears brief-
ly in the display followed by the current
frequency (which flashes).
G Press one of the station buttons 1 -
5 ; for longer than one second to
store the station to that button.
Stopping SCAN and continuing
listening to a station
Storing stations automatically
(Travelstore)
G Press the SCAN button 4 again.
Scanning is stopped and the station that
was tuned into last will remain active.
You can automatically store the five sta-
tions with the strongest reception in the
region (only for FM). The stations are
stored in the FMT memory.
Note:
G Stations that were previously
stored in this memory are deleted
in the process.
G Keep the FMT or BAND (TS) but-
ton 2 pressed for longer than two
seconds.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Note:
Setting the scantime
G If no station is found that corre-
sponds to the selected programme
type, you will hear a beep and “NO
PTY” appears briefly in the display.
The station that was listened to last
will then be tuned into again.
G Press the MENU button :.
G Keep pressing the or button
9 until “SCANTIME” appears in
the display.
G Set the required scantime using
the and buttons 9.
G If the tuned radio station or another
station on the broadcasting net-
work broadcasts the required pro-
gramme type at a later point in
time, the radio automatically
switches from the currently tuned
station or from CD mode / CD
changer mode to the station whose
programme type matches the one
you selected.
When you have finished making your
changes,
G press the MENU button : twice.
Note:
G The set scantime also applies to
scanning in CD and CD changer
mode.
Programme type (PTY)
Switching PTY on/off
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting.
G Keep the TRAF (PTY) button <
pressed until “PTY” appears in or
disappears from the display.
The programme type appears briefly in
the display when you switch PTY on.
For example, the programme types can
be:
CULTURE
SPORT
ROCK
TRAVEL
NEWS POP
MUSIC
JAZZ
Selecting a programme type and
starting seek tuning
G Press the or button 9.
The current programme type appears
in the display.
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
G If you want to select another pro-
gramme type, you can do so by
pressing the or button 9
whilst in this display.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Or
G Press one of the buttons 1 - 5 ; to
select a programme type that is
stored on one of these buttons.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
The selected programme type is dis-
played briefly.
Treble reduction feature during
interference (HICUT)
G Press the or button 9 to start
The HICUT function improves the sound
when radio reception is poor (FM only).
When interference is being experi-
enced, the treble is automatically cut,
which therefore also reduces the level
of interference.
seek tuning.
The next station corresponding to your
selected programme type will then be
tuned into.
Storing a programme type on a
station button
Switching hicut on/off
G Press the MENU button :.
G Select a programme type using the
or button 9.
G Keep pressing the or button
9 until “HICUT” appears in the
display.
G Press and hold the required button
1 - 5 ; until you hear a beep.
G Press the or button 9 to
The programme type is now stored on
the station button 1 - 5 ; that you se-
lected.
switch HICUT on/off.
“HICUT 0” means that treble will not be
reduced, and“HICUT 1”means that tre-
ble will be reduced.
Selecting the PTY language
You set the language in which the pro-
gramme type is displayed.
G Press the MENU button :.
G Press the MENU button :.
G Keep pressing the or button
9 until “PTY LANG” appears in
the display.
G Press the or button 9 to
switch between German, English
and French.
When the required language appears
in the display,
G press the MENU button : twice.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TRAFFIC INFORMATION RECEPTION
Setting the traffic
announcement volume
Traffic information
reception
G Press the MENU button :.
Switching traffic information
priority on/off
G Keep pressing the or button
9 until “TA VOLUME” appears in
the display.
G Press the TRAF button <.
Traffic announcement priority is active
when a traffic jam symbol lights up in
the display.
G Set the announcement volume us-
ing the and buttons 9.
G Press the MENU button : twice.
Note:
You will hear a warning sound
G if you leave the reception area of a
traffic information station that you
are currently listening to.
G if, while listening to a CD, you leave
the reception area of a traffic infor-
mation station that you are tuned
into and the subsequent automatic
search cannot find a new traffic in-
formation station.
G if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
CD mode
You can use this unit to play standard
CDs with a diameter of 12 cm.
If you press the
the current track will be played again
from the beginning.
/
button 9 once,
Quick track selection
To quickly select tracks backwards or
forwards,
Risk of damage to the CD drive!
CD singles with a diameter of 8 cm
and contoured CDs (shape CDs) are
not suitable for playback in this unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
G keep one of the or buttons 9
pressed until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
Switching to CD mode
G If there is no CD inserted in the
G keep one of the
buttons 9
pressed until fast reversing / fast
forwarding begins.
drive.
G Gently insert the CD with the print-
ed side uppermost into the CD
compartment until you feel some
resistance.
Random play (MIX)
G Press button 4 (MIX) ;.
MIX appears in the display. The next
randomly selected track will then be
played.
The CD will be drawn automatically into
the drive.
You must not hinder or assist the drive
as it draws in the CD.
Stopping MIX
CD playback begins.
G Press button 4 (MIX) ; again.
MIX disappears from the display.
G If a CD is already inserted in the
drive.
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
G Keep pressing the CD•C button 7
until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
G Press the SCAN button 4.
Note:
Selecting tracks
G You can set the scantime. For fur-
ther details, read the section enti-
tled “Setting the scantime” in the
“Radio mode” chapter.
G Press one of the
/
or
/
but-
tons 9 to select the next or previ-
ous track.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
Stopping SCAN and continuing
playback
G Press the button 9.
The current setting is displayed.“TIME”
for the playing time display and “PLAY”
for the track number display.
To stop scanning,
G press the SCAN button 4 again.
G Press the button 9 to select the
The current track will then continue to
be played.
required setting.
G Press the MENU button : twice.
Repeating tracks (REPEAT)
If you want to repeat a track,
G press button 3 (RPT) ;.
Removing the CD from the unit
To remove the CD from the unit,
G keep the CD•C button 7 pressed
RPT appears in the display.The track is
repeated until you deactivate RPT.
until the CD is ejected.
Cancelling the repeat function
If you want to cancel the repeat func-
tion,
G press button 3 (RPT) ; again.
RPT disappears. Normal playback is
then continued.
Pausing playback (PAUSE)
G Press button 2 ( ) ;.
“PAUSE” appears in the display.
Cancelling pause
G Press button 2 ( ) ; while in
pause mode.
Playback is continued.
Changing the display
To switch between the track number dis-
play and the track number / playing time
display,
G Press the MENU button :.
G Keep pressing the or button
9 until “CD DISP” appears in the
display.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
CD changer mode
Fast searching (audible)
To fast search backwards or forwards,
Note:
G Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
G keep one of the
buttons 9
pressed until fast reversing / fast
forwarding begins.
Changing the display
To switch between the track number /
CD number display and the track
number / playing time display,
Switching to CD changer mode
G Keep pressing the CD•C button 7
until “CHANGER” appears in the
display.
G press the MENU button :.
G Keep pressing the or button
9 until “CDC DISP” appears in the
display.
Playback begins with the first CD that
the CD changer detects.
Selecting a CD
G Press the button 9.
To move up or down to another CD,
The current setting is displayed.“TIME”
for the playing time display and“CD NO”
for the CD number display.
G press the or button 9 once or
several times.
G Press the button 9 to select the
Selecting tracks
To move up or down to another track on
the current CD,
required setting.
G Press the MENU button : twice.
Repeating individual tracks or
whole CDs (REPEAT)
G press the or button 9 once or
several times.
To repeat the current track,
Quick track selection
To quickly select tracks backwards or
forwards,
G briefly press button 3 (RPT) ;.
“RPT TRCK” appears briefly and RPT
lights up in the display.
G keep one of the or buttons 9
pressed until fast-forward / fast-re-
verse track selection begins.
To repeat the current CD,
G press button 3 (RPT) ; again.
“RPT DISC” appears briefly and RPT
lights up in the display.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
Cancelling the repeat function
Scanning all tracks on all CDs
(SCAN)
To scan all the tracks on all inserted CDs
in ascending order,
To stop the current track or current CD
from being repeated,
G keep pressing button 3 (RPT) ;
until “RPT OFF” appears in the dis-
play and RPT disappears.
G press the SCAN button 4.
“SCAN” appears in the display.
Random play (MIX)
To play the tracks on the current CD in
random order,
Stopping SCAN
To stop scanning,
G briefly press the SCAN button 4
G briefly press button 4 (MIX) ;.
again.
“MIX CD”appears briefly and MIX lights
up in the display.
The current track will then continue to
be played.
To play the tracks on all inserted CDs in
random order,
Note:
G You can set the scantime. For fur-
ther details, read the section enti-
tled “Setting the scantime” in the
“Radio mode” chapter.
G press button 4 (MIX) ; again.
“MIX ALL”appears briefly and MIX lights
up in the display.
Note:
Pausing playback (PAUSE)
G Press button 2 ( ) ;.
G In the case of CD changers CDC
A 08 and IDC A 09, all CDs in the
changer are randomly selected. All
other changers first play all the
tracks on a CD in random selection
before moving to the next CD in
the changer.
“PAUSE” appears in the display.
Cancelling pause
G Press button 2 ( ) ; while in
pause mode.
Playback is continued.
Stopping MIX
To stop the tracks from being played in
random order,
G keep pressing button 4 (MIX) ;
until “ MIX OFF” appears in the dis-
play and MIX disappears.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK - TIME
CLOCK - Time
G Press the or button 9 to
switch between the modes.
Displaying the time
To display the time,
When you have finished making your
changes,
G Keep the MENU ( ) button :
pressed until the time appears in
the display.
G press the MENU button :.
Displaying the time when the
unit is off and the ignition is on
To display the time when the unit is off
and the ignition is on,
Setting the time
G Press the MENU button :.
G Keep pressing the or button
9 until “CLOCKSET” appears in
the display.
G press the MENU button :.
“MENU” appears in the display.
G Keep pressing the or button
9 until “CLOCK OFF” or “CLOCK
ON” appears in the display.
G Press the button 9.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
G Press the or button 9 to
switch between the displays.
G Adjust the minutes using the
buttons 9.
/
When you have finished making your
changes,
Once the minutes are set,
G press the button 9.
The hours flash on and off.
G press the MENU button :.
Briefly displaying the time when
the unit is switched off
To briefly display the time when the unit
is off,
G Adjust the hours using the
buttons 9.
/
When you have finished making your
changes,
G press the MENU ( ) button :.
The time is displayed for around 8 sec-
onds.
G press the MENU button : twice.
Selecting 12/24-hour clock
mode
G Press the MENU button :.
“MENU” appears in the display.
G Keep pressing the or button
9 until “24 H MODE” or “12 H
MODE” appears in the display.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND
Sound
VOLUME DISTRIBUTION
Volume distribution
Adjusting the bass settings
To adjust the BASS,
Adjusting the balance settings
To adjust the left/right volume distribu-
tion (balance),
G press the AUDIO button 8.
“BASS” appears in the display.
G press the AUDIO button 8.
“BASS” appears in the display.
G Press the or button 9 to ad-
G Keep pressing the or button 9
just the bass.
until “BAL” appears in the display.
When you have finished making your
changes,
G Press the or button 9 to ad-
just the balance (right/left).
G press the AUDIO button 8.
When you have finished making your
changes,
Adjusting the treble settings
To adjust the TREBLE,
G press the AUDIO button 8.
G press the AUDIO button 8.
“BASS” appears in the display.
Adjusting the fader settings
To adjust the front/back volume distri-
bution (fader),
G Keep pressing the or button 9
until “TREB” appears in the display.
G press the AUDIO button 8.
G Press the or button 9 to ad-
“BASS” appears in the display.
just the treble.
G Keep pressing the or button 9
until “FADER” appears in the dis-
play.
When you have finished making your
changes,
G press the AUDIO button 8.
G Press the or button 9 to ad-
just the fader (front/back).
When you have finished making your
changes,
G press the AUDIO button 8.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
X-BASS
X-BASS
EXTERNAL AUDIO SOURCES
External audio sources
The X-BASS feature can be used to Instead of connecting a CD changer,
boost the bass at low volume levels.
you can also connect another audio
source equipped with a line output.The
audio source, for example, can be a
portable CD player, MiniDisc player or
MP3 player.
Adjusting the X-BASS boost
settings
The X-BASS boost can be set in steps
ranging from 1 to 3.
If you want to connect an external au-
dio source you will need a Blaupunkt
adapter cable (Blaupunkt no.:7 607 897
093).
“X-BASS OFF” means that the X-BASS
feature is switched off.
G Press the X-BASS button 6.
The AUX input must be activated in the
menu.
G Keep pressing the
or
but-
ton 9 until the required setting ap-
pears in the display.
Switching the AUX input on/off
If the X-BASS boost is set to a value of
1, 2 or 3, the X-BASS symbol appears
in the display.
G Press the MENU button :.
G Keep pressing the or button
9 until “AUX OFF” or “AUX ON”
appears in the display.
When you have finished making your
changes,
G Press the or button 9 to
G press the X-BASS button 6.
switch AUX on/off.
G Press the MENU button :.
Note:
The AUX input can now be selected by
pressing the CD•C button 7.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Specifications
Amplifier
GUARANTEE
Guarantee
The scope of the guarantee is orientat-
ed around the regulations in force with-
in the country in which the unit was pur-
chased.
Output power:
4 x 25 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 45 watts max.
power
If your unit develops a fault, please con-
tact your dealer and present the pur-
chase receipt.
If the statutory guarantee period in your
country is less than 12 months, Blau-
punkt will grant a 12-month manufac-
turer’s guarantee.This guarantee does
not cover damage due to wear, incor-
rect usage or commercial use.
Tuner
Frequency ranges:
FM:
MW:
LW:
87.5 – 108 MHz
531 – 1,602 kHz
153 – 279 kHz
If you wish to enforce a claim under the
manufacturer’s guarantee that is provid-
ed by Blaupunkt, please send the faulty
unit together with the purchase receipt
to the Blaupunkt customer service cen-
tre in your country. You can find out
which address is closest to you by con-
tacting the telephone hotline listed on
the back page of this booklet.Blaupunkt
retains the right to rectify defects or sup-
ply a replacement.
FM frequency response:
35 - 16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
2 V / 6 kOhm
Input sensitivity
AUX input:
Subject to changes!
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|