Radio / CD
Miami CD72
7 641 800 310
7 641 802 310
7 641 803 310
7 643 810 310
Orlando CD72
Seattle CD72
Montreal CD73
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
2
1
6
5
12
11
10
9
8
7
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
9
AUDIO button, to adjust the
1
2
3
Button, to switch the unit on/off,
adjust the volume
bass, treble, balance, fader and
loudness (short press) and oper-
ate the volume mute feature
(long press)
Button, to unlock the remova-
ble control panel (release panel)
NEXT button to display the other
pages in a menu and to switch
to a different memory bank in ra-
dio mode
:
;
Display
SOURCE button to start CD
playback / CD-changer playback
or Compact Drive MP3 (only if
connected)
4
Softkeys: the function of the
softkeys depends on the current
display content
or
To play an external audio source
(only if connected)
5
6
DEQ+ button, to open the equal-
izer menu
<
TUNER button, to activate radio
mode and open the radio func-
tions menu (only possible in ra-
dio mode)
button, to open the flip-re-
lease control panel
7
8
Joystick
MENU button, to open the basic
settings menu
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Listening to stored stations ............ 46
Programme type (PTY) .................. 46
Optimising radio reception............. 47
Setting the radiotext display ........... 48
Notes and accessories .......... 35
Road and traffic safety ................... 35
Safety information.......................... 35
Installation ..................................... 35
Accessories .................................. 35
Traffic information.................. 48
Removable control panel ....... 36
Switching on/off .................... 37
Adjusting the volume ............. 38
CD mode ................................ 49
Switching to CD mode and
inserting a CD ............................... 49
Removing a CD ............................. 50
Selecting tracks ............................ 50
Fast searching (audible) ................ 50
Random track play (MIX) ............... 50
Repeating tracks (REPEAT) ........... 50
Displaying CD text......................... 51
Setting scrolling text ...................... 51
Traffic announcements in CD
Sound and volume distribution
settings .................................. 40
Adjusting the bass ......................... 40
Adjusting the treble ....................... 40
X-BASS ........................................ 40
Adjusting the right/left volume
distribution (balance) ..................... 40
Adjusting the front/back volume
mode............................................. 51
distribution (fader) ......................... 41
CD changer mode (optional) . 52
Switching to CD changer mode..... 52
Selecting CDs............................... 52
Selecting tracks ............................ 52
Fast searching (audible) ................ 52
Repeating individual tracks or
whole CDs (REPEAT).................... 52
Random track play (MIX) ............... 53
Naming CDs ................................. 53
Adjusting the display.............. 41
Adjusting the viewing angle ........... 41
Adjusting the display brightness..... 41
Setting the button illumination
colour............................................ 42
Setting the level display ................. 42
Radio mode............................ 43
Configuring the tuner..................... 43
Switching to radio mode ................ 43 CLOCK - Time ........................ 55
Convenient RDS functions
(AF, REG) ..................................... 43
Selecting the waveband /
memory bank................................. 44
Tuning into a station....................... 45
Setting the sensitivity of station
seek tuning.................................... 45
Storing stations ............................. 45
Storing stations automatically
Equalizer ................................ 56
TMC for dynamic navigation
systems .................................. 60
Preamplifier............................ 60
External audio sources .......... 61
Specifications ........................ 61
(Travelstore) .................................. 46
34
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES AND ACCESSORIES
Road and traffic safety
Notes and accessories
Thank you for deciding to use a Blau-
punkt product. We hope you enjoy us-
ing this new piece of equipment.
Road and traffic safety have ab-
solute priority. Only operate your car
radio if the road and traffic conditions
allow you to do so. Familiarise your-
self with the device before setting off
on your journey.
Please read these operating instruc-
tions before using the equipment for
the first time.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, set the
volume of whatever you are listen-
ing to at a reasonable level.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the equip-
ment, please contact your dealer or the
telephone hotline for your country. You
will find the telephone numbers printed
at the back of this booklet.
Safety information
The car radio and the device's
control panel (flip-release panel) heat
up during use. Therefore, when re-
moving the flip-release panel, only
hold it by its non-metallic surfaces.
Allow the car radio to cool down first
if you want to uninstall the whole unit.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
Installation
If you want to install your car radio your-
self, please read the installation and
connection instructions that follow these
operating instructions.
D-31139 Hildesheim
Accessories
Only use accessories approved by Blau-
punkt.
Remote control
The RC 08, RC 10 or RC 10H remote
controls (available as optional accesso-
ries) allow you to safely and conven-
iently access the main functions of your
car radio.
The radio cannot be switched on/off
using the remote control.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES AND ACCESSORIES
THEFT PROTECTION
Removable control panel
Amplifier
All Blaupunkt amplifiers can be used.
Theft protection
As a way of protecting your car radio
Calibration microphone
You can use the calibration microphone against theft, the unit is equipped with
(available as an accessory) for the a removable control panel (flip-release
equalizer’s automatic sound calibration panel). Without this control panel, the
feature.
car radio is worthless to a thief.
Protect your equipment against theft by
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.
CD changer
The following CD changers can be ob-
tained from accessory retailers for con-
nection with this device: CDCA02, CDC
A 08, CDC A 072 und IDC A 09.
You can also connect the CDC A 071
CD-changer by using an adapter cable
(Blaupunkt no.: 7 607 889 093).
The control panel has been designed
to be easy to use.
Note:
● Never drop the control panel.
Compact Drive MP3
● Never expose the control panel to
direct sunlight or other heat sourc-
es.
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you con-
nect a Compact Drive MP3, you will first
need to use a computer to store the MP3
music tracks on the Microdrive(tm) hard
disk inside the Compact Drive MP3.
Then, when the Compact Drive MP3 is
connected to the car radio, you can play
the tracks like normal CD music tracks.
The Compact Drive MP3 is operated in
the same way as a CD changer. Most
of the CD changer functions can also
be used with the Compact Drive MP3.
● Store the control panel in the sup-
plied case.
● Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth soaked in alcohol.
Detaching the control panel
2
36
Download from Www.Somanuals.com. All Manuals Search And Download.
THEFT PROTECTION
SWITCHING ON/OFF
● Press the
button 2.
Switching on/off
The control panel latch mechanism
opens.
There are various ways of switching the
unit on/off.
● First, pull the control panel straight
off the unit and then out towards
the left.
Switching on/off using button
1
● To switch the unit on, press button
1 until you feel the latch open and
the button pushes out.
● The unit switches off after the con-
trol panel is removed.
● All the current settings are saved.
The unit switches on.
● Any CD already inserted in the unit
● To switch the unit off, press button
1 until you feel it click into place.
remains there.
Attaching the control panel
The unit switches off.
● Slide the control panel from left to
right into the unit’s guide.
Switching on/off using the
vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button 1, it will
switch on/off simultaneously with the
ignition.
● Press the left-hand edge of the
control panel into the unit until it
clicks into place.
You can switch the unit on even if the
ignition is off.
● To do so, press button 1 so that
you feel it unlatch and push out.
Note:
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.
● When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated (i.e. radio, CD, CD
changer/Compact Drive MP3 or AUX)
when the panel is replaced.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
Adjusting the volume
Activating mute
This feature allows you to instantane-
ously reduce the volume (mute).
The volume can be adjusted in stages
from 0 (off) to 50 (maximum).
● Press the AUDIO button 9 for
● To increase the volume, turn the
volume control 1 to the right.
longer than two seconds
“MUTE” appears in the display.
● To decrease the volume, turn the
volume control 1 to the left.
Cancelling mute
Setting the power-on volume
You can set the unit’s default power-on
● Briefly press the AUDIO button 9.
or
volume.
● turn the volume control 1.
● Press the MENU button 8.
Telephone audio / navigation
audio
● Press the softkey 4 assigned to
the “VOL” display item.
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
the manner described in the installation
instructions.
● Press the softkey 4 assigned to
the “ON” display item.
● Set the required volume using the
volume control 1.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Note:
To avoid damage to your hearing, the
power-on volume is limited to a value
of “40”.
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car radio.
If a traffic information message is re-
ceived during a telephone call or whilst
a navigation announcement is being
made, the traffic message will only be
played after the call or voice output is
finished.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE VOLUME
If, during a traffic announcement, a tel-
ephone call arrives or the navigation
system wants to output a spoken in-
struction, the traffic announcement is
interrupted and the telephone call/voice
output can be heard.
Automatic sound
This feature automatically adjusts the
volume of the car radio to suit the speed
at which the vehicle is travelling. In or-
der for this to work, your car radio must
be connected in the manner described
in the installation instructions.
You can set the volume level at which
telephone calls and the navigation voice
output will first be heard.
The automatic volume boost can be set
to six levels (0-5). “0” means no boost
and “5” means maximum boost.
● Press the MENU button 8.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “VOL” display item.
● Press the softkey 4 assigned to
the “VOL” display item.
● Press the softkey 4 that is as-
signed to the “TEL” display item for
the telephone volume or “NAVI”
display item for the voice output.
● Press the softkey 4 assigned to
the “AUTO” display item.
● Set the boost level using the joy-
stick 7.
● Set the required volume using the
volume control 1.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
The settings are saved.
Note:
Note:
The optimum setting for the speed-re-
lated sound adjustment feature de-
pends on how noise levels develop in
your particular vehicle. You will need to
test various settings in order to find out
which is best suited to your vehicle.
You can also adjust the volume during
the telephone call using the volume con-
trol 1.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND AND VOLUME DISTRIBUTION SETTINGS
X-BASS
Sound and volume
distribution settings
The X-BASS feature can be used to
aurally compensate the bass at low vol-
ume levels. The X-BASS boost can be
set in steps ranging from 0 (off) to 6
(max). If X-BASS is activated, the con-
figured X-BASS boost level will be dis-
play alongside the X-BASS symbol in
the display.
Note:
You can adjust the bass, treble and X-
BASS individually for each audio
source.
Adjusting the bass
● Press the AUDIO button 9.
“AUDIO 1” appears in the display.
● Press the AUDIO button 9.
“AUDIO 1” appears in the display.
● Press the softkey 4 assigned to
the “BASS” display item.
● Press the softkey 4 assigned to
the “X-BASS” display item.
● Move the joystick 7 up or right to
boost the bass or move it down or
left to reduce the bass.
● Move the joystick 7 up or right to
boost the X-BASS or move it down
or left to reduce the X-BASS.
When you have finished making your
changes,
When you have finished making your
changes,
● press the joystick OK 7 or the
AUDIO button 9.
● press the joystick OK 7 or the
AUDIO button 9.
Adjusting the treble
Adjusting the right/left volume
distribution (balance)
● Press the AUDIO button 9.
“AUDIO 1” appears in the display.
● To adjust the balance, press the
AUDIO button 9.
● Press the softkey 4 assigned to
the “TREB” display item.
“AUDIO 1” appears in the display.
● Move the joystick 7 up or right to
boost the treble or move it down or
left to reduce the treble.
● Press the softkey 4 assigned to
the “BAL” display item.
● Move the joystick 7 up/right or
down/left to adjust the right/left vol-
ume distribution.
When you have finished making your
changes,
● press the joystick OK 7 or the
AUDIO button 9.
When you have finished making your
changes,
● press the joystick OK 7 or the
AUDIO button 9.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
VOLUME DISTRIBUTION ADJUSTING THE DISPLAY
Adjusting the front/back volume
distribution (fader)
Adjusting the display
You can adjust the display to suit the
installation position in your vehicle and
your own preferences.
● To adjust the fader, press the AU-
DIO button 9.
“AUDIO 1” appears in the display.
Adjusting the viewing angle
● Press the softkey 4 assigned to
the “FADE” display item.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “DISP” display item.
● Move the joystick 7 up/right or
down/left to adjust the front/back
volume distribution.
● Press the softkey 4 assigned to
the “ANGL” display item.
When you have finished making your
changes,
● Move the joystick 7 up/right or
down/left to adjust the viewing an-
gle.
● press the joystick OK 7 or the
AUDIO button 9.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Adjusting the display brightness
If your car radio has been connected
as described in the installation instruc-
tions, the display brightness will switch
over when the headlights are turned on/
off. The display brightness can be ad-
justed separately for night and day in
steps ranging from 1-6. We recommend
setting “6”.
Daytime display brightness
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “DISP” display item.
● Press the softkey 4 assigned to
the “DAY” display item.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE DISPLAY
● Move the joystick 7 up/right or
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
down/left to adjust the brightness.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
Setting the level display
The settings are saved.
The level display briefly provides a sym-
bolic display of the volume, the sound
control settings and the equalizer set-
tings whilst you are making your chang-
es.
Night-time display brightness
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “DISP” display item.
When you are not changing any set-
tings, the level display can display the
car radio’s output level. You can also
switch off the level display and have the
current volume level displayed continu-
ously.
● Press the softkey 4 assigned to
the “NGHT” display item.
● Move the joystick 7 up/right or
down/left to adjust the brightness.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
Switching the level display on/off
● Press the MENU button 8.
The settings are saved.
● Press the softkey 4 assigned to
the “DISP” display item.
Setting the button illumination
colour
The colour of the device’s button illumi-
nation can be adjusted (only the softkey
colours can be changed on the Miami
CD72). Choose between “COLOR 1” or
“COLOR 2”.
● Keep pressing the softkey 4 as-
signed to the “EQ” display item un-
til the required setting “EQ DISP
OFF” or “EQ DISP ON” appears.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
● Press the MENU button 8.
The settings are saved.
● Press the softkey 4 assigned to
the “DISP” display item.
● Keep pressing the softkey 4 as-
signed to the “KEYS” display item
until the required colour (“COLOR
1” or “COLOR 2”) appears in the
display.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Switching to radio mode
Radio mode
If the device is in CD mode, cassette
mode, Multi-Media Card (MMC) mode
(depending on the car radio’s equip-
ment) or CD changer/Compact Drive
MP3 mode,
This unit is equipped with an RDS radio
receiver. Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
● press the TUNER button <.
The station name appears in the dis-
play as soon as it is received. You can
optionally display the programme type.
For further details, please read the sec-
tion entitled “Programme type (PTY)”.
The main radio menu for tuning into a
station is displayed. The radio mode
functions are controlled in the radio func-
tions menu. You can open the radio
functions menu by pressing the TUN-
ER button < again. If you are in any
other mode, you can open the radio
functions menu by pressing the MENU
button 8 followed by the softkey 4
that is assigned to the “TUNE” display
item.
Configuring the tuner
To ensure that the tuner works proper-
ly, the device must be configured for
your region. You can choose between
Europe and the USA. By default, the
tuner is set to the region in which the
device was sold. If you experience prob- Convenient RDS functions
lems with radio reception, please check
these settings.
(AF, REG)
The convenient RDS functions AF (Al-
● Press the MENU button 8.
ternative Frequency) and REG (Region-
al) extend your radio’s range of func-
tions (only in FM radio mode).
● Press the softkey 4 assigned to
the “SETP” display item.
● AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
● Press the softkey 4 assigned to
the “AREA” display item.
● Press the softkey 4 assigned to
the display item of the region that
you require: “EURO” or “USA”.
● REG: At certain times, some radio
stations divide their programme
into regional programmes providing
different content. You can use the
REG function to prevent the car ra-
dio from switching to alternative
frequencies that are providing dif-
ferent regional programme content.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Note:
Selecting the waveband /
memory bank
REG must be separately activated/de-
activated in the radio functions menu.
This unit can receive programmes
broadcast over the FM and MW/LW
(AM) frequency ranges. There are four
memory banks for the FM range and
one for each of the MW and LW rang-
es.
Switching the RDS function on/off
To use the RDS functions (AF and
REG),
● press the TUNER button < in ra-
dio mode.
Six stations can be stored in each mem-
ory bank.
The radio functions menu appears in the
display.
Selecting the waveband
● Press the softkey 4 assigned to
the “RDS” display item.
To select the FM, MW or LW waveband,
● press the TUNER button < in ra-
“RDS ON” or “RDS OFF” appears briefly
in the display.
dio mode.
The radio functions menu appears in the
display.
To return to the main radio menu,
● press the TUNER button < or the
joystick OK 7.
● Press the softkey 4 assigned to
the “BAND” display item.
The settings are saved.
● Press the softkey 4 assigned to
the “FM” display item for the FM
waveband.
Switching REG on/off
To use the REG RDS function,
● press the TUNER button < in ra-
● Press the softkey 4 assigned to
the “MW” display item for the MW
waveband.
dio mode.
The radio functions menu appears in the
display.
● Press the softkey 4 assigned to
the “LW” display item for the LW
waveband.
● Press the softkey 4 assigned to
the “REG” display item.
The main radio menu for the selected
waveband appears.
“REG ON” or “REG OFF” appears brief-
ly in the display.
● Press the TUNER button < or the
joystick OK 7.
Selecting the FM memory bank
To switch between the FM memory
banks FM1, FM2, FM3 and FMT,
The settings are saved.
● keep pressing the NEXT button 3
until the required memory bank ap-
pears in the display.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
The memory banks are accessed in the
following order: FM1, FM2, FM3 and
FMT.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
Tuning into a station
There are various ways of tuning into a
station.
● press the TUNER button < in ra-
Automatic seek tuning
dio mode.
● Move the joystick 7 down or up.
The radio functions menu appears in the
The unit tunes into the next receivable display.
station.
● Press the NEXT button 3.
Tuning into stations manually
● Press the softkey 4 assigned to
the “SENS” display item.
You can also tune into stations manual-
ly.
The display shows the currently set sen-
sitivity level. “SENS 6” is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
● Move the joystick 7 left or right.
Note:
You can only tune into stations manual-
ly if the RDS function is deactivated.
● Move the joystick 7 up/right or
Browsing through broadcasting
networks (only FM)
down/left to adjust the sensitivity.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its “broadcasting network”.
The settings are saved.
● Move the joystick 7 left or right.
Storing stations
Note:
Storing stations manually
The RDS function must be activated
before you can use this feature.
● Select the required FM memory
bank, i.e. FM1, FM2, FM3, FMT, or
one of the MW or LW wavebands.
When using this feature, you will only
be able to switch to stations that you
have received once already.
● Tune into the required station as
described in the section entitled
“Tuning into a station”.
● Press one of the six softkeys for
longer than two seconds to store
the station to that softkey.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Programme type (PTY)
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your radio can receive
and display this information.
For example, the programme types can
be:
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
CLASSICS
Starting the Travelstore function
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
● Press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
PTY-EON
If you specify the programme type and
start seek tuning, the unit will switch from
the current station to a station of the
selected programme type.
● Press the softkey 4 assigned to
the “TS” display item.
The station storing procedure begins.
“T-STORE” appears in the display. Af-
ter the process is completed, the sta-
tion stored in FMT memory location 1
will be played.
Note:
● If no station is found that corre-
sponds to the selected programme
type, you will hear a beep sound
and “NO PTY” appears briefly in
the display. The radio will then re-
tune to the station that was re-
ceived last.
Listening to stored stations
● Select the memory bank or wave-
band.
● Press the softkey 4 that is as-
signed to the name or frequency of
the station that you want to listen
to.
● If the tuned radio station or another
station on the broadcasting net-
work broadcasts the required pro-
gramme type at a later point in
time, the radio automatically
switches from the currently tuned
station or from CD mode / CD
changer mode to the station whose
programme type matches the one
you selected.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
If no station is found that corresponds
to the selected programme type, you will
hear a beep sound and “NO PTY” ap-
pears briefly in the display. The radio
will then retune to the station that was
received last.
Activating PTY
To use the PTY function,
● press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
Note:
● Press the softkey 4 assigned to
the “PTY” display item.
If you want to switch back to the pro-
gramme types display,
If PTY is activated, the display shows
the current programme type. PTY ap-
pears in the display. The programme
types are displayed alongside the
softkeys 4.
● briefly move the joystick 7 in any
direction.
Optimising radio reception
Treble reduction feature during
interference (HiCut)
Cancelling PTY
To cancel the PTY function,
The HiCut function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
● Whilst the programme types are
being displayed, press the softkey
4 assigned to the “OFF” display
item.
Selecting a programme type and
starting seek tuning
Setting HiCut
● Press the TUNER button < in ra-
The PTY menu is made up of several
pages on which the known programme
types are displayed. To browse through
the PTY menu’s pages,
dio mode.
The first page of the radio functions
menu is displayed.
● Press the NEXT button 3.
● keep pressing the NEXT button 3
until the required programme type
appears alongside one of the
softkeys.
● Press the softkey 4 assigned to
the “HCUT” display item.
● Move the joystick 7 up/right or
● Press the softkey 4 assigned to
down/left to set the HiCut.
the required programme type.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
● Move the joystick 7 up/right or
down/left to start seek tuning.
The next receivable station correspond-
ing to your selected programme type will
then be tuned into.
The settings are saved.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
TRAFFIC INFORMATION
Traffic information
Setting the radiotext display
Some stations use the RDS signal to
broadcast scrolling texts known as ra-
diotexts. You can activate or deactivate
the radiotext display.
Your unit is equipped with an RDS-EON
receiver. EON (Enhanced Other Net-
work) is a feature that involves the
broadcasting of radio station informa-
tion within a broadcasting network.
Every time a traffic announcement (TA)
is transmitted, you will automatically be
switched from a station that does not
provide traffic information to a station
within the broadcasting network that
does.
● Press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
● Press the NEXT button 3.
The “second page” of the radio functions
menu is displayed.
Once the traffic announcement has
been heard, you will be switched back
to the programme that you were listen-
ing to before.
● Press the softkey 4 assigned to
the “RTXT” display item.
“RTXT ON” or “RTXT OFF” appears
briefly in the display.
Switching traffic information
priority on/off
● Press the TUNER button < or the
joystick OK 7.
● Press the TUNER button < in ra-
dio mode.
The settings are saved.
The radio functions menu appears in the
display.
● Press the softkey 4 assigned to
the “TRAF” display item.
Traffic announcement priority is active
when a traffic jam symbol is displayed.
Note:
The TAmenu is displayed during a traf-
fic announcement.
To interrupt the current traffic announce-
ment,
● press the softkey 4 assigned to
the “OFF” display item.
If you want to deactivate priority for traf-
fic announcements,
● press the softkey 4 assigned to
the “TRAF” display item.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
TRAFFIC INFORMATION
CD MODE
Note:
CD mode
You can use this unit to play standard
CDs with a diameter of 12 cm.
You will hear a warning sound:
● if you leave the reception area of a
traffic information station that you
are currently listening to.
CD-Rs (CDs that you have “burned”
yourself) and CD-RWs can generally
also be played. Due to the varying qual-
ity of CDs, Blaupunkt cannot guaran-
tee that this will work properly.
● if, while listening to a CD, cassette
or Multi-Media Card (depending on
the car radio’s equipment), you
leave the reception area of a traffic
information station that you are
tuned into and the subsequent au-
tomatic search cannot find a new
traffic information station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
To ensure the system functions proper-
ly, only use CDs labelled with the com-
pact disc logo. Problems might be ex-
perienced when trying to play copy-pro-
tected CDs. Blaupunkt cannot guaran-
tee the proper functioning of copy-pro-
tected CDs!
Risk of severe damage to the
CD drive!
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
CD singles with a diameter of 8 cm
and non-circular contoured CDs
(shape CDs) must not be used.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
Setting the volume for traffic
announcements
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “VOL” display item.
Switching to CD mode and
inserting a CD
● If there is no CD inserted in the unit
● Press the softkey 4 assigned to
the “TRAF” display item.
yet,
● Set the required volume using the
volume control 1.
● press the
The control panel opens out towards
you.
button 6.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
● Insert the CD with the printed side
uppermost into the CD compart-
ment.
The CD is drawn into the drive.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
You must not hinder or assist the drive
as it draws in the CD.
Fast searching (audible)
To fast search backwards or forwards,
The control panel closes automatically.
● Press and hold the joystick 7 in
one direction (up and right for the
next track or down and left for the
previous track) until fast searching
backwards/forwards begins.
The CD menu appears and CD play-
back begins.
● If a CD is already inserted in the
unit,
● keep pressing the SOURCE button
; until CD mode is displayed.
Random track play (MIX)
● Press the softkey 4 assigned to
the “MIX” display item.
The CD menu appears and playback
begins from the point at which it was
last interrupted.
“MIX ON” appears briefly in the display.
The next track to be played will be
picked at random.
Removing a CD
● press the
button 6.
Cancelling MIX
The control panel opens out towards
you and the CD is ejected.
● Press the softkey 4 assigned to
the “MIX” display item again.
● Carefully remove the CD.
“MIX OFF” appears briefly in the dis-
play.
● Press the
button 6.
The control panel closes.
Repeating tracks (REPEAT)
● Press the softkey 4 assigned to
the “RPT” display item.
Selecting tracks
● Move the joystick 7 in one direc-
tion (up and right for the next track
or down and left for the previous
track) until the number of the re-
quired track appears in the display.
“REPEATON” appears briefly in the dis-
play. The track is repeated until you
deactivate RPT.
Cancelling REPEAT
If you press the joystick 7 downwards
once or to the left once, the current track
will be played again from the beginning.
● Press the softkey 4 assigned to
the “RPT” display item again.
“REPEAT OFF” appears briefly in the
display. Normal playback is then re-
sumed.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
Displaying CD text
Traffic announcements in CD
mode
Some CDs include CD text. The CD text
may contain the names of the artist, the
album and track.
● If you want to receive traffic an-
nouncements whilst in CD mode,
activate traffic information recep-
tion in the radio functions menu.
You can allow the CD text to be dis-
played as scrolling text every time you
switch to another track. After the whole
CD text has been shown once, the
name of the track is displayed. If the
inserted CD does not contain any CD
text, “NO TEXT” will briefly appear in
the display if the CD text feature is acti-
vated.
Traffic announcement priority is active
when a traffic jam symbol is displayed.
For further details, please read the chap-
ter entitled “Traffic information recep-
tion”.
Activating CD text
● Press the softkey 4 assigned to
the “TAG” display item.
Deactivating CD text
● Press the softkey 4 assigned to
the “TAG” display item again.
Setting scrolling text
You can display the contents of the main
display area as scrolling text.
Activating CD scrolling text
● Press the softkey 4 assigned to
the “SCRL” display item.
“SCROLL ON” appears briefly in the
display.
Deactivating CD scrolling text
● Press the softkey 4 assigned to
the “SCRL” display item again.
“SCROLL OFF” appears briefly in the
display.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
or
CD changer mode
(optional)
● keep pressing the joystick 7 up or
down until the number of the re-
quired CD appears in the display.
To find out which CD changers / Com-
pact Drive can be used with this unit,
please refer to the "Accessories" chap-
ter in these instructions or contact your
Blaupunkt dealer.
Selecting tracks
To move down or up to another track
on the current CD,
Note:
● repeatedly press the joystick 7 to
the left or right until the number of
the required track appears in the
display.
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
If you press the joystick 7 once to the
left, the current track will be played again
from the beginning.
Information on using the Compact Drive
MP3 and recording music tracks onto it
can be found in the operating instruc-
tions supplied with the Compact Drive
MP3.
Fast searching (audible)
To fast search backwards or forwards,
Switching to CD changer mode
● press and hold the joystick 7 to
the left or right until fast searching
backwards / forwards begins.
● Keep pressing the SOURCE but-
ton ; until CD changer mode is
displayed.
Repeating individual tracks or
whole CDs (REPEAT)
Playback continues from the point at
which it was last interrupted. If the mag-
azine was removed from the CD chang-
er and then replaced, the CD magazine
will first be scanned, and playback will
begin from the first track on the first CD
that the CD changer detects.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
The CD changer functions menu opens.
● Press the softkey 4 assigned to
the “RPT” display item.
Selecting CDs
To move up or down to another CD,
“RPT TRCK” appears briefly in the dis-
play.
● press the softkey 4 assigned to
the display item of the CD (CD1 –
CD10) that you require. To do so,
you might need to switch to the
“second page” of the main CD-
changer menu using the NEXT
button 3.
To repeat the whole CD,
● press the softkey 4 assigned to
the “RPT” display item again.
“RPT CD” appears briefly in the display.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
Cancelling REPEAT
Cancelling MIX
To stop the current track or current CD To cancel MIX,
from being repeated,
● keep pressing the softkey 4 that
● keep pressing the softkey 4 that
is assigned to the “RPT” display
item until “RPT OFF” appears brief-
ly in the display.
is assigned to the “MIX” display
item until “MIX OFF” appears brief-
ly in the display.
Naming CDs
The car radio allows you to assign
Random track play (MIX)
To play the tracks on the current CD in names for up to 99 CDs (not with the
random order,
Compact Drive MP3) so that you can
recognise them more easily. The names
can be a maximum of eight characters
long.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
If you try assigning more than 99 names,
“FULL” will appear in the display.
The CD changer functions menu opens.
● Press the softkey 4 assigned to
the “MIX” display item.
Entering / editing CD names
● Listen to the CD that you want to
“MIX CD” appears in the display.
name.
To play the all the tracks on all inserted
CDs in random order,
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
● press the softkey 4 assigned to
the “MIX” display item again.
The CD changer functions menu opens.
“MIX ALL” appears in the display.
● Press the softkey 4 assigned to
the “NAME” display item.
Note:
In the case of the CDC A 08 and the
IDC A 09, all the CDs and all the tracks
in the changer are picked randomly. In
the case of any other changer, all the
tracks on one CD are played randomly
first before the next CD in the changer
is played.
You will now enter edit mode. If your
chosen CD does not have a name yet,
eight underscores will appear in the dis-
play. The current input position flashes.
● Move the joystick 7 up or down to
select the character you want. If
you want an empty space, simply
select the underscore.
● Move the joystick 7 to the left or
right to change the input position.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
“CDC CLEAR” appears in the display.
The process can take up to 45 seconds
depending on how many CD names
have been stored.
● To save a name, press the softkey
4 assigned to the “NAME” display
item.
Deleting a CD name
Note:
● Listen to the CD whose name you
This function is not available for the
Compact Drive MP3. If you use this
function with the Compact Drive MP3,
“CDC CLEAR” is displayed for 45 sec-
onds. You will not be able operate the
unit whilst this is happening.
want to delete.
● Press the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
● Press the softkey 4 assigned to
the “NAME” display item.
You will now enter edit mode. The name
of the CD appears in the display and
the current input position flashes.
● Move the joystick 7 up or down to
select the underscore character.
● Move the joystick 7 to the left or
right to change the input position.
● Insert an underscore at every input
position.
● Press the softkey 4 assigned to
the “NAME” display item.
The CD name will be deleted.
Deleting all CD names
You can delete all the CD names stored
in the unit.
● To delete all the CD names, press
the MENU button 8.
● Press the softkey 4 assigned to
the “CDC” display item.
● Press the softkey 4 assigned to
the “CLR” display item.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK - TIME
To adjust the minutes,
CLOCK - Time
● press the softkey 4 assigned to
the “MIN” display item.
Setting the clock
The clock can be set automatically us-
ing the RDS signal. You can also set
the clock manually if you cannot receive
a radio station that supports this feature.
The minutes flash.
● Adjust the minutes using the joy-
stick 7.
● Press the joystick OK 7 or the
MENU button 8 to close the
menu.
Setting the clock automatically
To set the clock automatically,
● press the MENU button 8.
The settings are saved.
● Press the softkey 4 assigned to
the “VARI” display item.
● Keep pressing the softkey 4 as-
signed to the “CSYN” display item
until “RDS SYN ON” appears brief-
ly.
“RDS SYN ON” means that the clock is
set automatically using the RDS signal.
Setting the clock manually
● To set the time, press the MENU
button 8.
● Press the softkey 4 assigned to
the “VARI” display item.
● Press the softkey 4 assigned to
the “CSET” display item.
The “CLOCK SET” menu appears.
● Press the softkey 4 assigned to
the “HOUR” display item.
The hours flash on and off.
● Adjust the hours using the joystick
7.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUALIZER
Equalizer
This unit is equipped with a digital sound
calibration feature (DSA – Digital Sound
Adjustment). It provides you with three
self-calibrating 5-band equalizers and
five sound presets.
Switching the equalizer on/off
To switch the equalizer on/off,
● press the DEQ+ button 5.
The equalizer menu is displayed.
To activate the equalizer,
The EQ1 - EQ3 equalizers can be cali-
brated automatically with the help of a
special calibration microphone. You can
obtain this microphone from your Blau-
punkt dealer. The automatically ascer-
tained values can also be adjusted
manually.
● Press the softkey 4 assigned to
the “USER” or “PRE” display item
and select an equalizer.
To deactivate the equalizer,
● Press the softkey 4 assigned to
the “OFF” display item.
Furthermore, you can also set the equal-
izer manually.
Automatically calibrating the
equalizer
The following bands are available:
You can electronically calibrate and
store values for three different situations.
● SUB LOW EQ 32 - 50 Hz
● LOW EQ
● MID EQ
63 - 250 Hz
EQ 1 for the driver only
EQ 2 for the driver and front
passenger
315 - 1,250 Hz
● MID/HIGH EQ 1,600 - 6,300 Hz
EQ 3 for the front and rear occupants
● HIGH EQ
8,000 - 12,500 Hz
Hold the calibration microphone (avail-
able as an accessory) in the appropri-
ate position whilst the calibration is tak-
ing place.
The position of the calibration micro-
phone for situation 1 (e.g. for the driver
alone) is at the height of the driver's
head.
For situation 2, the calibration micro-
phone is between the driver and pas-
senger.
For Situation 3, it is in the middle of the
vehicle interior (left/right, front/back).
Really quiet surroundings are required
for the calibration.Any extraneous noise
will distort the measured values.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUALIZER
Note:
Selecting sound presets
You can select sound presets for the
following music types.
The sound radiating from the loud-
speakers must not be obstructed by any
objects. All the loudspeakers must be
connected. The microphone must be
connected to the unit.
● VOCAL (“VOCL”)
● DISCO (“DISC”)
● ROCK
To calibrate an equalizer,
● TECHNO (“TECH”)
● CLASSIC (“CLAS”)
● Press the DEQ+ button 5.
● Press the softkey 4 assigned to
the “USER” display item.
The settings for these music styles have
already been programmed.
● Press the softkey 4 assigned to
the display item of the equalizer
that you want to configure.
● Press the DEQ+ button 5.
● Press the softkey 4 assigned to
the “PRE” display item.
● Press the softkey 4 assigned to
the “AUTO” display item.
● Select one of the presets using the
corresponding softkeys 4.
You will hear a test sound, and calibra-
tion takes place.
● Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
● Proceed as described for all the
equalizers.
The settings are saved.
Selecting an equalizer
After calibration has taken place or you
have finished making manual adjust-
ments,
● press the DEQ+ button 5.
● Press the softkey 4 assigned to
the “USER” display item.
● Select one of the equalizers “EQ1”,
“EQ2” or “EQ3” using the corre-
sponding softkeys 4.
● Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
The settings are saved.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUALIZER
Making adjustments
Manually adjusting the equalizer
Notes on adjusting the settings
● Press the DEQ+ button 5.
● Press the softkey 4 assigned to
the “USER” display item.
We recommend you use a CD or cas-
sette (depending on the car radio’s
equipment) that you are familiar with for
making changes to the settings.
● Press the softkey 4 assigned to
the display item of the equalizer
that you want to configure.
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate X-BASS. For fur-
ther details, refer to the chapter entitled
“Sound and volume distribution set-
tings”.
● Press the softkey 4 assigned to
the display item of the equalizer
band that you want to configure.
To select the frequency,
● press the joystick 7 to the left or
● Listen to a CD or cassette (de-
pending on the car radio’s equip-
ment).
right.
● Adjust the level for the frequency
by pressing the joystick 7 up or
down.
● What impression does the sound
give you?
● Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
● Now read the “Sound impression”
column in the table entitled “Help
adjusting the equalizer”.
The settings are saved.
● Set the equalizer values as de-
scribed in the “Measures” column.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUALIZER
Help adjusting the equalizer
Sound Impression / problem
Measures
Bass sound is too weak
Increase bass with
Frequency: 32 to 160 Hz
Level: +4 to +6 dB
Dirty bass
Booming sound
Unpleasant pressure
Reduce the lower mid level with
Frequency: 400 Hz
Level: approx. -4 dB
Sound very much in the foreground,
aggressive, no stereo effect.
Reduce the mid level with
Frequency: 1,000 to 2,500 Hz
Level: -4 to -6 dB
Dull sound
Little clarity
No brilliance to the instruments
Increase treble level with
Frequency: 6,300 to 10,000 Hz
Level: +2 to +4 dB
59
Download from Www.Somanuals.com. All Manuals Search And Download.
PREAMPLIFIER
TMC
TMC for dynamic navigation Preamplifier
systems
The car radio provides connections for
connecting an external preamplifier and
a subwoofer.
TMC stands for “Traffic Message Chan-
nel.” Traffic information announcements
are broadcast digitally usingTMC, which
means they can be used by compatible
navigation systems during route plan-
ning. Your car radio has a TMC output
which you can use for connecting Blau-
punkt navigation systems. You can find
out from your Blaupunkt dealer which
navigation systems can be used with
your car radio.
We recommend you use well-matched
products from the Blaupunkt or Veloci-
ty product ranges.
If a navigation system is connected and
a TMC station is being received, TMC
lights up in the display.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL AUDIO SOURCES
External audio sources
SPECIFICATIONS
Specifications
In addition to the CD changer, you can
also connect another external audio
source equipped with a line output. The
audio source can, for example, be a
portable CD player, MiniDisc player or
MP3 player.
Amplifier
Output power:
4 x 26 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
The AUX input must be activated in the
setup menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Tuner
Wavebands:
FM
MW :
LW
:
87.5 – 108 MHz
531 – 1,602 kHz
153 – 279 kHz
Switching the AUX input on/off
:
● Press the MENU button 8.
FM frequency response:
30 - 16,000 Hz
● Press the softkey 4 assigned to
the “SETP” display item.
● Press the softkey 4 assigned to
the “AUX1” or “AUX2” display item
for the input that you want to switch
on/off.
CD
Frequency response:
15 - 20,000 Hz
The AUX menu is displayed.
Pre-amp out
4 channels:
Note:
4 V / 10 kΩ
If a CD changer is connected, you can-
not change the “AUX1” input.
AUX input
Input sensitivity:
● Press the softkey 4 assigned to
the “ON” or “OFF” display item to
switch the input on/off.
1.2 V / 10 kΩ
Note:
If theAUX input is switched on it can be
selected by pressing the SOURCE but-
ton ;.
Subject to changes!
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 0030 210 57 85 350 0030 210 57 69 473
(IRL) 01-4149400
01-4598830
02-369 6464
40 2085
(I)
02-369 6331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
10/03 TRO
CM/PSS 8 622 403 256
Download from Www.Somanuals.com. All Manuals Search And Download.
|