Blakeslee Dishwasher Dishwashing Kitchen Equipment User Manual |
Flight-Type Dishwashers
The Ultimate Cleaning Machine!
Two Tank with Pre-Wash
Three Tank
Single Tank
Single Tank with Pre-Wash
Two Tank
Flight-A-Round Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
Commercial Dishwashing & Kitchen Equipment…SINCE 1880!
Durability • Efficiency • Performance • Ease-of-Use • Flexibility!
n NEW 24-Volt Control Circuit…is safer
and more dependable!
H’’ diameter stainless steel conveyor rods and
stainless rollers are standard.
n NO-Incline Conveyor Design…Con-
veyor link design eliminates inclined belt
entry/exit, allowing easy slide-on rack
loading!
Flat,“no-incline” belt design reduces unit height,
simplifies and speeds ware loading.
n Heavy 1/2” Diameter Conveyor
Support Rods…Minimize conveyor
deflection and resist hard use, even
standing on the belt!
n Patented I.R.S. Distribution System…
All recirculated water systems are
“pumpless”and mounted inside the
cabinet.
n Lower 57.5”Overall Unit Height…
For easy unit cleaning, plus an
n All Stainless Steel Main Frame…
Resists corrosion in damp dishrooms
and provides years of trouble-free
service!
unobstructed view in the dishroom!
Underslung belt link design allows easy slide-on
rack loading from end or either side.
Top and bottom mounted water jets provide
torrential cleaning & rinse action.
One piece lower spray box and upper manifolds
have no loose parts and are easy to remove for
cleaning.
Large 30’’wide lift-up/off tank doors provide
easy access for tank and component cleaning.
Download from Www.Somanuals.com. All Manuals Search And Download.
1844 S. Laramie Ave.
Chicago, IL 60804
(708) 656-0660
1149 Bellamy Road, No. 19
Scarborough, ON M1H 1H7
CANADA
Fax: (708) 656-0199
(416) 751-2625
Fax: (416) 751-8539
Available OPTIONS include:
Blakeslee Modular Design Flexibility…
• A machine mounted electric or steam heatedWater Booster Heater
• Single point utility connections to speed and simplify installation
• An integrated, top mounted Blower/Dryer
The Blakeslee Flight-Type Dishwashing Systems are modular and can
be designed to fit the space, layout and structural constraints of any
dishroom. They can be sized to meet your peak demand for clean
ware, with:
• One, two or three tank models, plus pre-wash combinations;
• Standard 20'' belt or a 30'' extra-wide belt;
Blakeslee Design Assistance, Project Support…
AND Post-Sale Service!
Blakeslee’s team of in-house customer care specialists, project design
engineers and manufacturer’s representatives can assist you with sys-
tem sizing and model selection. Trained Blakeslee service technicians,
backed by factory technical support teams, are available to help install
and repair all Blakeslee dish machines.
• Modular tank sizes [lengths] to match dishroom space, dish
capacity and your budget;
• Standard 2H' or 4' Load Section or custom lengths;
• Standard 4' or 6' Unload Section or custom lengths;
• Choice of electric, gas or steam [coil or injection] Tank Heating; and
• Custom Flight-A-Round Systems [See below].
Blakeslee is: Small enough to respond…BIG enough to perform!
Popular Flight-Type Models & Dish Cleaning Guide
Total Tank
Length*
F Series 20” Wide Belt XF Series 30” Wide Belt
Model Number
Number & Type of Tank Modules
[Dishes/Hour]
[Dishes/Hour]
F/XF-PL-64
Single [Wash], w/Pre-Wash
64"
74"
6010
8220
F/XF-PM-74
Single [Wash], w/Pre-Wash
6010
8220
F/XF-EE-72
Two Tanks: Wash & Rinse
72"
7200
10,800
13,900
13,900
10,800
13,900
13,900
13,900
13,900
13,900
F/XF -LL-80
Two Tanks: Wash & Rinse
80"
9066
F/XF -MM-100
F/XF-PEE-96
F/XF -PLL-104
F/XF -PMM-124
F/XF-LLL-120
F/XF-LMM-140
F/XF-MMM-150
Two Tanks: Wash & Rinse
100"
96"
9066
Two [Wash & Rinse], w/Pre-Wash
Two [Wash & Rinse], w/Pre-Wash
Two [Wash & Rinse], w/Pre-Wash
Three Tanks: Pre-Wash, Wash & Rinse
Three Tanks: Pre-Wash, Wash & Rinse
Three Tanks: Pre-Wash, Wash & Rinse
7200
104"
124"
120"
140"
150"
9066
9066
9066
9066
9066
*Without Load or Unload Sections
Custom Flight-A-Round Dishwashing
Systems…
Blakeslee Flight-A-Round Systems integrate our modular flight-
type sections in a continuous, closed loop configuration that can be
designed as a compact oval, square, rectangle or even a triangle. These
conveyor configurations provide more dishware loading and unload-
ing area or can be used to separate loading areas, unloading areas and
machine location in different rooms. If multi-tank warewashers are
too long for a single side, our Pre-Wash, Wash or Rinse Modules can be
positioned on different sides. Only Blakeslee offers both 20" wide
(F Series) and 30" extra-wide (XF Series) systems! We can help you
design a Flight-A-Round System that is ideal for you!
Typical Rectangular Configuration
with separate Wash & Rinse Tanks.
Printed in U.S.A.
Doc. B-FTD [8/05]
Download from Www.Somanuals.com. All Manuals Search And Download.
|