Australia
New Zealand
FSM1630-XE
Download from Www.Somanuals.com. All Manuals Search And Download.
G
H
I
J
K
3
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
Intended use
Using your appliance
Your Black & Decker steam mop has been designed for
sanitising and cleaning sealed hardwood, sealed laminate,
linoleum, vinyl, ceramic tile, stone and marble floors and for
refreshing carpets. This appliance is intended for indoor
household use only.
u
Do not direct steam at people, ani-
mals, electrical appliances or electrical
outlets.
u
u
u
Do not expose to rain.
Safety instructions
Do not immerse the appliance in water.
Do not leave the appliance unattend-
ed.
Warning! Read all
@
safety warningsFaaniludre to
u
u
Do not leave the appliance connected
to an electrical outlet when not in use.
Never pull the power lead to discon-
nect the appliance from the socket.
Keep the appliance lead away from
heat, oil and sharp edges.
all instructions.
follow the warnings and instruc-
tions listed below may result in
electric shock, fire and/or seri-
ous injury.
u
u
Do not handle steam cleaner with wet
hands.
Warning!When using mains-
@
powered appliances, basic
Do not pull or carry by cord, use cord
as a handle, close door on cord, pull
cord around sharp corners or expose
cord to heated surfaces.
safety precautions, including the
following, should always be fol-
lowed to reduce the risk of fire,
electric shock, personal injury
and material damage.
u
Do not use appliance in an enclosed
space filled with vapour given off by
oil-base paint thinner, some moth-
proofing substances, flammable dust,
or other explosive or toxic vapours.
Check the type of floor with the manu-
facturer.
u
u
Read all of this manual carefully be-
fore using the appliance.
The intended use is described in this
manual. The use of any accessory
or attachment or the performance
of any operation with this appliance
other than those recommended in this
instruction manual may present a risk
of personal injury.
u
u
Do not use on leather, wax polished
furniture or floors, synthetic fabrics,
velvet or other delicate, steam-sensi-
tive materials.
u
Retain this manual for future refer-
ence.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
u
u
u
Care should be taken when using this
appliance. DO NOT touch any parts
which may become hot during use.
Switch the appliance off and return the
handle to the upright position before
removing the water tank.
Warning!Do not use on
unsealed wood or unsealed
laminate floors. On surfaces that
have been treated with wax or
some no wax floors, the sheen
may be removed by the heat
and steam action. It is always
recommended to test an iso-
lated area of the surface to be
cleaned before proceeding. We
also recommend that you check
the use and care instructions
from the floor manufacturer.
@
For floor use only; do not use the unit
upside down. This appliance is intend-
ed for indoor household use only.
After use
u
u
u
Unplug the appliance and allow to cool
before cleaning.
When not in use, the appliance should
be stored in a dry place.
u
Never put descaling, aromatic, alco-
holic or detergent products into the
steam cleaner, as this may damage it
or make it unsafe for use.
Children should not have access to
stored appliances.
InUsnppelucgttihoenapapnliadncreeapnadiarlslow to cool
u
If the home circuit breaker activates
while using the steam function, dis-
continue product use immediately and
contact the customer support centre.
(Beware of the risk of electrical shock.)
The appliance emits very hot steam to
sanitize the area of use. This means
that the steam head, cleaning pads
and carpet attachment get very hot
u
before performing any maintenance or
repairs.
u
Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may af-
fect its operation.
u
u
u
u
Regularly check the power lead for
damage.
u
dCuarinugtiuosen.!Always wear suitable
shoes when using your steam mop
and when changing the accessories on
your steam mop. Do not wear slippers
or open toed footwear.
Do not use the appliance if any part is
damaged or defective.
Have any damaged or defective parts
repaired or replaced by an authorized
repair agent.
u
u
The lid may become hot during use.
Steam may escape from the appliance
during use.
u
Never attempt to remove or replace
any parts other than those specified in
this manual.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
Electrical safety
Safety of others
u
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sen-
sory or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Warning!This prod-
@
uct must be earthed.
Always check that the
power supply corre-
sponds to the voltage
on the rating plate.
Power plugs must match the outlet.
Never modify the plug in any way.
Unmodified plugs and matching
outlets will reduce risk of electric
shock.
u
If the supply cord is damaged, it must
be replaced by the manufacturer or
an authorised Black & Decker Service
Centre in order to avoid a hazard.
u
Children should be supervised to
ensure that they do not play with the
appliance.
Residual risks.
Extension cables & Class 1
prAo3d-cuocretcable must be used as your
u
Additional residual risks may arise
when using the tool which may not
be included in the enclosed safety
warnings. These risks can arise
from misuse, prolonged use etc.
Even with the application of the
relevant safety regulations and the
implementation of safety devices,
certain residual risks can not be
avoided. These include:
appliance is earthed and of Class 1
construction.
u
Up to 30m (100 ft) can be used without
loss of power.
Labels on the appliance
The following pictograms are shown on the tool:
u
u
u
u
Injuries caused by touching any mov-
ing parts.
Warning! To reduce the risk of injury, the user
must read the instruction manual.
Injuries caused by touching any hot
parts.
Injuries caused when changing any
parts or accessories.
Warning! Danger of scalding.
Injuries caused by prolonged use of
the appliance. When using any appli-
ance for prolonged periods ensure you
take regular breaks.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
Features
Return the handle (4) to the upright position and turn the
steam mop ‘OFF’.
Place the steam mop on the resting mat and wait until it
This appliance includes some or all of the following features.
1. ON/Off switch
2. SmartselectTM button
3. Removable water tank
4. Handle
Place the front of your shoe onto the cleaning pad removal
5. Steam head
Lift the steam mop up off the cleaning pad.
6. Steam head cleaning pad
7. Delta head cleaning pad
8. Resting mat
Caution! Always place the steam mop on the resting mat (8)
with the handle (4) in the upright position when stationary and
make sure the steam mop is turned off when not in use.
9. Carpet glider
10. Bottom cable tidy hook
11. Top cable tidy hook
12. Cable management clip
Attaching the carpet glider (Fig. F)
Lightly press the steam mop down onto the carpet glider
(9) until it clicks into place.
Assembly
Caution! Always place the steam mop on the resting mat (8)
with the handle (4) in the upright position when stationary and
make sure the steam mop is turned off when not in use.
Warning! Before attempting any of the following operations,
make sure that the appliance is switched off and unplugged
and that the appliance is cold and does not contain any water.
Removing the carpet glider (Fig. F)
Caution! Always wear suitable shoes when changing the
carpet glider on your steam mop. Do not wear slippers or
open toed footwear.
Attaching the handle (Fig. A)
Slide the bottom end of the handle (4) into the top end of
the steam mop body (13) until it clicks into place.
Return the handle (4) to the upright position and turn the
steam mop ‘OFF’.
Attaching the steam head (Fig. B)
Slide the bottom end of the steam mop body (13) onto the
Place the steam mop on the resting mat and wait until it
steam head (5) until it clicks into place.
The steam head can be removed from the Steam mop
body by pressing the steam head release button (14) and
pulling the steam mop body (13) off the steam head (5).
Place the front of your shoe onto the carpet glider removal
Lift the steam mop up off the carpet glider (9).
Caution! Always place the steam mop on the resting mat (8)
with the handle (4) in the upright position when stationary and
make sure the steam mop is turned off when not in use.
Attaching the water jug (Fig. C)
Clip the water jug (3) onto the handle (4).
Slide the water jug (3) down into the Steam mop body
The Delta Head (Fig. G)
This Steam Mop incorporates a built in delta head which
enables you to access into tight corners and narrow gaps.
Caution! Always wear suitable shoes when accessing the
delta head on your steam mop. Do not wear slippers or open
toed footwear.
Attaching a cleaning pad (Fig. D)
Replacement cleaning pads are available from your Black &
Decker dealer:- (cat. no. FSMP20-XE).
Return the handle (4) to the upright position and turn the
steam mop ‘OFF’.
Place the steam mop on the resting mat and wait until it
loop’ side facing up.
Lightly press the steam mop down onto the cleaning pad
(6 or 7).
Caution! Always place your steam mop on the resting mat (8)
with the handle (4) in the upright position when stationary and
make sure the steam mop is turned off when not in use.
Place the front of your shoe onto the steam head removal
tab (18) and press down gently.
Lift the delta head (17) up off the steam head (5).
Fit the delta head cleaning pad to the bottom of the delta
head.
Removing a cleaning pad (Fig. E)
Caution! Always wear suitable shoes when changing the
cleaning pad on your steam mop. Do not wear slippers or
open toed footwear.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
TM
Note:
Smartselect Technology (Fig. J)
SmartselectTM button (2)
head to the steam head.
which shows various cleaning applications. They are used to
select the correct operating mode for your particular cleaning
operation.
Using SmartselectTM , choose from one of the following applic-
ations by pressing the smartselect button (2) until the required
setting is selected:
delta head clicks into place.
Caution! Always place the steam mop on the resting mat (8)
with the handle (4) in the upright position when stationary and
make sure the steam mop is turned off when not in use.
Wood/Laminate
Stone/Marble
Tiles/Vinyl
Filling the water tank (Fig. H)
The watertank on your steam mop is removable for convi-
This Steam Mop incorporates an anti-calc system to help
prolong the life of the system.
Note: Fill the water tank with clean tap water.
Note: In areas of very hard water, the use of de-ionised water
is recommended.
Remove the water tank (3).
The steam mop will select the correct volume of steam
required for your particular cleaning operation.
(20).
Note: Always check you are using the correct setting before
using your steam mop. For convienience the steam mop will
remember the last setting you chose.
Fill the water tank (3) with water.
Warning! Your water tank has a 0.5 litre capacity. Do not over
Steam burst (Fig. I)
The steam mop is equipped with a steam bust button to aid in
the removal of stubborn marks and stains.
During use, press the steam bust button (21) to apply
extra cleaning power.
Note: The stem burst will last for 10 seconds then the stem
mop will return to the chosen setting.
Note:
Use
Important! This unit will kill 99.9% of bacteria & germs when
Switching on and off
Hints for optimum use
To switch the appliance on, press the ON/OFF button (1).
It takes approximately 15 seconds for the steam mop to
heat up.
General
Caution!
Note:
-
cleaning pad.
ervoir will glow red. Once the steam mop is ready to use the
water reservoir will glow blue.
During use you can use the cable mamagement clip (11)
to keep your cable out of the way of the work area..
To switch the appliance off, press the ON/OFF button (1).
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop on
the resting mat (8) with the handle (4) in the upright position
when stationary and make sure the steam mop is turned off
when not in use.
mop.
The easiest way to use the machine is to tilt the handle to
a 45˚ angle and clean slowly, covering a small area at a
time.
Do not use chemical cleaners with your steam mop. To
Caution! Always empty the steam mop after use.
can use the steam burst button to apply extra steam to
the area or pre-treat with a mild detergent and some water
before using the steam mop.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
Steam cleaning
Press the SmartselectTM button (2) to the Wood/Laminate
setting.
loop’ side facing up.
Pulling the handle (4) back will activate the steam pump.
After a few seconds steam will start to come out of the
steam head.
Push and pull the steam mop slowly across the carpet to
thoroughly refresh each section.
Note: During use you may turn off the steam pump by return-
ing the handle (4) to the upright position, this convenient
feature will allow you to place the steam mop on the resting
mat (8) so that you may move items of furniture with out the
need to switch the appliance off.
Raise the steam mop off the resting mat (8) and lightly
press it down onto the cleaning pad (6 or 7).
Place the steam mop on the resting mat.
Connect the steam mop to the mains.
Press the ON/OFF button (1). It takes approximately 15
seconds for the steam mop to heat up.
Press the SmartselectTM button (2) till the required setting
is reached.
Pulling the handle (4) back will activate the steam pump.
After a few seconds steam will start to come out of the
steam head.
It takes a few seconds for steam to enter the cleaning pad.
The steam mop will now glide easily over the surface to be
sanitised/cleaned.
handle (4) to the upright position and turn it ‘OFF’, place it
on the resting mat (8) and wait until the steam mop cools
Caution! It is important to monitor the water level in the water
thoroughly steam clean each section.
return the handle (4) to the upright position and turn the steam
mop ‘OFF’. Unplug the unit from the electrical wall outlet,
Note: During use you may turn off the steam pump by return-
ing the handle to the upright position, this convenient feature
will allow you to place the steam mop on the resting mat for
a short time so that you may move items of furniture, then
continue cleaning without the need to switch the appliance off.
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop on
the resting mat (8) with the handle (4) in the upright position
when stationary and make sure the steam mop is turned off
when not in use.
handle (4) to the upright position and turn it ‘OFF’, place it
on the resting mat (8) and wait until the steam mop cools
After use (Fig. J & K)
Caution! It is important to monitor the water level in the water
Return the handle (4) to the upright position and turn the
steam mop ‘OFF’,
return the handle (4) to the upright position and turn the steam
mop ‘OFF’. Unplug the unit from the electrical wall outlet,
Place the steam mop on the resting mat (8) and wait until
Unplug the steam mop from the electrical wall outlet.
Empty the water tank (3).
Remove the cleaning pad (6 or 7) and wash it ready for
next use. (Take care to follow the wash care instructions
printed on the cleaning pad).
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop on
the resting mat (8) with the handle (4) in the upright position
when stationary and make sure the steam mop is turned off
when not in use.
Wrap the supply cable around the cable tidy hooks (10 &
11).
Carpet refreshing
Note: The top cable tidy hook (11) rotates to easily release the
cable ready for next use.
loop’ side facing up.
Clip the supply cable onto itself using the cable tidy clip
(22) close to the plug.
Raise the steam mop off the resting mat (8) and lightly
press it down onto the cleaning pad (6 or 7).
Place steam mop on the resting mat (8) for storage.
Note: With the handle (4) in the upright position, the cable
neatly wrapped around the cable tidy hooks (10 & 11) and
secured with the cable tidy clip (22) your steam mop will stand
on its own for storage. Alternatively there is a hanging bracket
(23) built into the hand grip (24) which will allow your steam
mop to be hung from a suitable hook on the wall. Always
ensure that your wall hook is capable of supporting the weight
of the steam mop safely.
Lightly press the steam mop down onto the carpet glider
(9) until it clicks into place.
Place the steam mop on the resting mat. (8)
Connect the steam mop to the mains.
Press the ON/OFF button (1). It takes approximately 15
seconds for the steam mop to heat up.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
(Original instructions)
ENGLISH
Technical data
Maintenance and cleaning
Your Black & Decker corded appliance has been designed to
operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper appliance care and regular cleaning.
Warning! Before performing any maintenance or cleaning on
corded appliances switch off and unplug the appliance.
Wipe your appliance over using a soft damp cloth.
For stubborn marks you can use a mild solution of soap
and water to dampen your cloth.
FSM1630-XE
(Type 1)
Voltage
Vac
W
230
1600
500
2.7
Power
Tank capacity
ml
Weight
kg
Care of the cleaning pads
Wash care instructions - No fabric conditioner - Allow to dry
fully before re-use.
Caution! Follow the cleaning instructions printed on the label
of the cleaning pad.
Protecting the environment
Separate collection. This product must not be
Z
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and packaging
z
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Australia & New Zealand
Stanley Black & Decker
82 Taryn Drive, Epping, VIC 3076 Australia
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)
90591389
10/12
Download from Www.Somanuals.com. All Manuals Search And Download.
|