PowerWash™
Powerbrush
U S E R ’ S G U I D E
1622 SERIES 220-240V
3
4
5
Safety Instructions
Product View
Assembly
5-6 Special Features
6-8 Operation
8-9 Maintenance and Care
9-10 Troubleshooting
10 Consumer Services
11
Replacement Parts
12 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
■
■
■
■
When using an electrical appliance, basic
precautions should be observed, including
the following:
Remove plug from electrical outlet before cleaning
or maintaining the appliance
Not intended for use by young children or infirm
persons without supervision
Young children should be supervised to ensure
that they do not play with the appliance
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, petrol, etc.)
Do not modify the Earthed plug
Do not allow to be used as a toy
Do not use for any purpose other than described
in this User’s Guide
Use only manufacturer’s recommended
attachments
Use only cleaning products formulated by
BISSELL for use in this appliance to prevent
internal component damage
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGhT DEEP CLEANER.
■
■
■
Always connect to a properly Earthed
outlet. Unplug from outlet when not in
use and before conducting
maintenance or troubleshooting.
■
■
WARNING:
Use indoors only
To reduce the
risk of fire, electric shock, or injury:
■
■
■
■
■
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface
Turn off all controls before unplugging
Be extra careful when cleaning stairs
Pay close attention when working
around children
■
■
Do not immerse
■
Use only on surfaces moistened by
cleaning process
■
Do not leave machine when it is plugged in
■
Do not service machine when it is plugged in
■
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent in order
to avoid a hazard
Do not use machine if it has been dropped,
damaged, left outdoors or dropped into water
SAVE ThESE
■
INSTRUCTIONS.
ThIS moDEL IS foR hoUSEhoLD USE oNLY.
■
Do not expose to rain, store indoors
■
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around sharp
corners or edges, run appliance over cord, or
expose cord to heated surfaces
WARNING:
This appliance must
be Earthed
.
■
Do not carry the appliance while in use
IMPORTANT
foR oPERATIoN oN
A 220-240 VoLT A.C. 50/60 hz PoWER
SUPPLY oNLY.
■
Do not unplug by pulling on cord; unplug by
grasping plug not the cord
■
Do not handle plug or appliance with wet hands
■
Do not put any object into appliance openings, use
If your appliance is fitted with a nonrewireable
BS 1363 plug it must not be used unless a 13
amp (ASTA approved to BS 1362) fuse is fitted in
the carrier contained in the plug. Spares may be
obtained from your BISSELL supplier. If for any
reason the plug is cut off, it must be disposed
of, as it is an electric shock hazard should it be
inserted into a 13 amp socket.
with blocked opening or restrict air flow
■
Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts
Do not pick up hot or burning objects
Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene, etc.) or use
in the presence of explosive liquids or vapours
Do not use appliance in an enclosed space filled with
■
■
■
vapours given off by oil base paint, paint
thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapours
3
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Spray Trigger
Cord Clip
Strain Reliever
Handle™
Quick Release™
Cord Wrap
Handle Assembly
Power Cord
Power Switch
Upper Body
Assembly
2-in-1 Water Tank™
(with built in
measuring cup)
Lower Body
Assembly
Large, Easy-To-Maneuver
Wheels
Easy Carry
Handle
Handle Release
Belt Access Door
WARNING:
To reduce the risk of fire and electric
shock due to internal component damage,
use only BISSELL cleaning fluids
Removable
Nozzle
intended for use with the deep cleaner.
Non-BISSELL cleaning solutions may
harm the machine and void the warranty.
DirtLifter™
PowerBrush
Cleaning fluid
™
Keep plenty of genuine BISSELL Fiber Cleansing Formula on hand so you can clean and protect
whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and will void the warranty.
48 oz. BISSELL 48 oz. BISSELL 48 oz. BISSELL 48 oz. BISSELL
48 oz. BISSELL
Lavender Essence
Formula with
Fiber Cleansing
Formula™ with
Scotchgard™
Protector
Multi- Allergen
Pet Odor and
Soil Removal™
Formula with
Scotchgard™
Protector
Natural Orange
Extract Formula
with Scotchgard™
Protector
Removal™
Formula™ with
Scotchgard™
Protector
Scotchgard™
Protector
item # 710E
item # 740E
item # 750E
item # 720E
item # 730E
4
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
how to use this guide
WARNING:
This user’s guide has been designed to help
you get the maximum satisfaction from your
BISSELL deep cleaner. You’ll find assembly
and operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this user’s guide
thoroughly before assembling your deep
cleaner.
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
Your deep cleaner comes in three easy to
assemble components:
Tip: Deep cleaning carpeting
regularly can reduce dust and allergens
in your home.
• Handle assembly
• Upper body assembly
• Lower body assembly
Three Phillips head screws are also included and
can be found taped to handle assembly.
1.
2.
Assembly
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1. Slide upper body assembly onto lower body
and secure with two screws.
2. Slide handle assembly down into upper body
until it will go no further and secure with
screw.
Special features of your BISSELL deep cleaner
Your BISSELL deep cleaner is a home cleaning
system that uses a combination of hand hot tap
water, BISSELL advanced cleaning formula, brush
agitation and suction to safely clean carpets.
DirtLifter™ PowerBrush
WARNING:
To reduce the riskoffire,use only
BISSELL advanced deep cleaning
formula for full size machines in your
deepcleaner.Use ofcleaning
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle
pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights.
When the power is ON ( I ) and the machine is
in the upright position, your carpet is protected
because the brushes are lifted up off the carpet.
formulas that contain lemon or
pine oilmaydamage thisappliance
andvoidthe warranty.Chemical
spotcleanersorsolvent-basedsoil
removersshouldnotbe used.These
productsmayreactwiththe plastic
materialsusedinyourdeepcleaner
causing cracking or pitting.
5
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features of your BISSELL deep cleaner
Measuring cup
Your deep cleaner is equipped with a measuring
cup for adding the proper amount of formula
to the 2-in-1 water tank. For convenience the
measuring cup is built into the lid of the 2-in-1
water tank.
Measuring Cup
2-in-1 water tank
Carry Handle
Our 2-in-1 water tank system is designed with a
heavy duty bladder inside for clean water. As you
clean, the clean water in the bladder will empty
and mix with the cleaning formula. Dirty water
pulled out of your carpets will collect around the
outside of the bladder so that clean and dirty
water are always kept separate. This allows the
user to maximize tank space, yet only carry one
tank to and from the sink for emptying and filling.
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum or
deep cleaner may aggravate this
condition.
Operation
Before you clean
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3. Vacuum area with a dry vacuum cleaner
before deep cleaning.
4. Plan your cleaning route to leave an exit path. It
is best to begin cleaning in the corner farthest
from your exit.
EXIT
9
10
12
7
6
5
3'
1
AR
ST
T
2
HERE
3
4'
Fill the 2-in-1 water tank
4
1. With your foot, press the handle release
lever on the back of the machine and lay
handle down to access the tank.
1.
2.
2. Remove the tank from the base of the machine
by lifting the tank carry handle.
Handle Release Lever
6
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Fill the 2-in-1 water tank (continued)
4.
3.
5.
3. Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove lid,
turn over and locate built in measuring cup.
4. Fill formula to the indicated fill line on the
built in measuring cup and pour into mouth
of the bladder.
6.
5. Fill up the bladder with clean hand hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
6. Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position to
latch the lid.
7.
Note: Remember to secure the lid and test
to make sure it is secure before picking up
the tank.
7. Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
Tip:
Thorough vacuuming
before deep cleaning will prevent
early clogging of the lint trap.
Carpet cleaning strokes
1. Plug the deep cleaner into a proper outlet
and turn the power switch ON ( I ). The
switch is located on the back of the unit.
2. With your foot, press the handle release
lever on the back of the lower body of unit.
WARNING:
To reduce the risk of fire
and electric shock due to
internal component
3. While pressing the spray trigger, make one
slow forward wet pass and another back.
Let the BISSELL advanced deep cleaning
formula and DirtLifter PowerBrush do the
work for you. Caution: Do not over wet.
damage, use only BISSELL
cleaning fluids intended for
use with the deep cleaner.
Non-BISSELL cleaning
solutions may harm the
machine and void
4. Release the spray trigger and make one
slow forward and backward pass over the
same area to remove any residual dirty
water and aid in drying.
the warranty.
5. Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the spray trigger until you
can’t see any more water being suctioned up.
7
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Empty the 2-in-1 water tank/clean removable nozzle
1. Turn power switch OFF (O). Remove the 2-in-1
1.
2.
water tank from the base using the tank carry
handle.Carry the tank like a bucket to a utility sink
or outside where you will dispose of the collection
water.Remove the top of the tank by rotating the
handle forward to unlatch lid and lifting lid off tank.
2. Empty collection water from bottom of tank.
Lint Screen
3. After each use, remove and rinse the lint
4.
3.
screen located on the tank lid.
4. Ifnozzleneedstoberinsed,removebygrasping
handleattopandpullingforward.Clean removable
nozzle by rinsing under running water.
5. When finished replace nozzle by slightly raising
front of machine to line up slots on the base of
the machine with the hooks on nozzle. Attach
5.
at base first and then click nozzle into place.
NOTE: If nozzle is not attached properly,
loss of suction will occur.
6. To continue carpet cleaning refer back to
page 7, beginning with “Fill the 2-in-1 water
tank”.
If cleaning is complete, refer to the “Maintenance
and care” section on below.
Maintenance and care
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF (O). Unplug the
machine and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse it
out at a faucet with running hand hot tap water,
taking care to clean underneath and around the
heavy duty bladder. Clean out red lint screen.
Removable nozzle may be rinsed if necessary.
3. Replace the 2-in-1 water tank on the machine.
4. Any loose hair or debris can be pulled from
the brush roll if desired and thrown away.
5. Wipe the machine’s exterior with a soft cloth.
6. After carpet is dry, vacuum again to remove
hair and fuzz.
8
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Machine storage
Put the unit away in a closet or basement for
the next use. Store cleaner in a protected, dry
area. Since this product uses water, it must not
be stored where there is a danger of freezing.
Freezing will damage internal components and
void the warranty.
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Troubleshooting
Reduced Spray OR No Spray
Possible cause
Remedies
1. Bladder may be empty
1. Turn power switch OFF (O); Refill bladder
with clean hand hot tap water.
2. 2-in-1 water tank may not be seated properly.
3. Pump may have lost prime.
2. Turn power switch OFF (O); remove tank
and reseat tank.
3. Turn power switch OFF (O); after 1 minute
turn ON (I) and depress spray trigger.
4. The pump belt may be broken.
4. Turn power switch OFF (O) and unplug from
the outlet. To check if a pump belt has broken,
you will need a flat head screwdriver.
A. Insert the blade end into the slot of the
belt access door to release. Examine the
belt for breakage. You should be able to see
the pump belt looped around the motor shaft.
If it is broken or missing, please refer to
Replacement Parts on page 11 before calling
BISSELL Consumer Services.Complete
installationinstructionswill accompany the
replacement belt.
A.
B.
B. When replacing belt access door be
sure to line up slots of belt access door with
slots in machine, slide door into place and
snap shut.
Slots Pump Belt
DirtLifter PowerBrush Does Not Turn
Possible cause
1. The brush belt or pump belt is off or broken.
Remedies
1. Refer to Remedy 4 above to check if brush
belt or pump belt is broken.
Cleaner Not Picking Up Solution
Possible cause
1. Removable nozzle may not be properly attached.
Remedies
1. Make sure nozzle is on correctly by slightly
raising front of machine to line up slots on the
base of the machine with the hooks on nozzle.
Attach at base first and then click nozzle into place.
2. 2-in-1 water tank lid is not properly installed.
2. Re-install lid; refer to the image on page 7.
9
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Cleaner Not Picking Up Solution
Possible cause
3. 2-in-1 water tank is not properly seated.
Remedies
3. Tank must be firmly seated to function;
remove and reseat tank.
4. 2-in-1 water tank has picked up maximum dirty water. 4. Empty tank and refill, refer to
the Operation section.
5. The lint screen may be clogged
5. Clean out lint screen. Refer to page 8.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
BISSELL Consumer Services
If your BISSELL product should require service:
In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will
give you the location of a BISSELL Authorized Service Center in your area. for all other countries, contact
your local in country distributor for questions, service, or repair.
If you have questions about your warranty or need replacement parts please contact the numbers below.
For UK inquiries:
For Australian inquiries:
monday - Thursday
friday
9 am — 5 pm
9 am — 4 pm
monday - friday 9 am — 5 pm
BISSELL AUSTRALIA PTY LIMITED
Unit 35
15 Ricketts Road
mount Waverley, Victoria 3149
Australia
BISSELL homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 1-800-811-183
Telephone: 0870-225-0109
For all other inquiries:
For New Zealand inquiries:
monday - friday 8 am — 4 pm
monday - friday 9 am — 5 pm
BISSELL homecare, Inc.
Po Box 1888
Grand Rapids, mI 49501 USA
Telephone: 01-616-453-4451
fax: 01-616-453-1383
Parex Industries Ltd.
103 Central Park Drive
henderson
Auckland
New Zealand
Telephone: 0800-247-735
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your model Number: ___________________
Please record your Purchase Date: ___________________
Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of
a warranty claim. See Warranty on page 12 for details.
Please do not return this product to the store.
10 w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement parts
Below is a list of common replacement parts. While not all of these parts may have come
with your specific machine, all are available to you for purchase, if desired.
Item Part No. Part Name
1
2
3
4
5
6
203-0104 Tank Assembly Complete
203-0102 Tank Base
203-0124 Removable Nozzle
215-0628 Replacement Pump Belt (with instructions)
015-0621 Replacement Brush Belt (with instructions)
203-0105 Lint Screen
1
5
2
6
3
4
Cleaning Formula: Refer to bottom of page 4 of this guide for a full selection of
cleaning formula available for purchase.
11
w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty - BISSELL PowerWash Powerbrush
This warranty gives you specific legal rights, and you may also have other rights which may vary from country
to country. If you need additional instruction regarding this warranty or have questions regarding what it may
cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or
contact your local in country distributor.
Limited One Year Warranty
Subject to the *EXCEPTIoNS AND EXCLUSIoNS identified below, BISSELL homecare, Inc., will replace (with
new or remanufactured components), at BISSELL’s option, free of charge from the date of purchase by the
original purchaser, for one year any defective or malfunctioning part do to manufacturers defect.
This warranty applies to product used for personal, and not commercial or rental service. This warranty does
not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction
caused by negligence, abuse, or use not in accordance with the User’s Guide is not covered.
For UK inquiries:
For Australian inquiries:
monday - Thursday
friday
9 am — 5 pm
9 am — 4 pm
monday - friday 9 am — 5 pm
BISSELL AUSTRALIA PTY LIMITED
Unit 35
15 Ricketts Road
mount Waverley, Victoria 3149
Australia
BISSELL homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 1-800-811-183
Telephone: 0870-225-0109
For all other inquiries:
For New Zealand inquiries:
monday - friday 8 am — 4 pm
monday - friday 9 am — 5 pm
BISSELL homecare, Inc.
Po Box 1888
Grand Rapids, mI 49501 USA
Telephone: 01-616-453-4451
fax: 01-616-453-1383
Parex Industries Ltd.
103 Central Park Drive
henderson
Auckland
New Zealand
Telephone: 0800-247-735
BISSELL hOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ASSOCIATED WITh ThE USE OF ThIS PRODUCT.
BISSELL’S LIABILITY WILL NOT EXCEED ThE PURChASE PRICE OF ThE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM ThE TERMS OF ThE LIMITED WARRANTY
ThIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OThER WARRANTIES
EIThER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WhICh MAY ARISE
BY OPERATION OF LAW, INCLUDING ThE IMPLIED WARRANTIES OF
MERChANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO ThE ONE YEAR DURATION FROM ThE DATE OF PURChASE AS
DESCRIBED ABOVE.
©2008 BISSELL homecare, Inc
Grand Rapids, michigan
All rights reserved. Printed in China
Part Number 120-4040
Rev 5/08
Scotchgard is a trademark of 3m
12 w w w . b i s s e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
|