osc illating
STAND
fan
fan
rem ote c ontrol
STAND
MODEL BSF1731
BSF1731RC
BSF1731RC-CN
Read instructions before operating. Retain for future reference.
Instruction Leaflet
IN FO-LIN E
☎
If after having read this leaflet, you have any questions
or com m ents on your fan,
call 1-8 0 0 -7 8 8 -5 3 5 0 in North Am erica.
428-0307
Model BSF1731 Shown
Download from Www.Somanuals.com. All Manuals Search And Download.
PLEASE READ AND SAVE THESE
IMPORTANT SAFEGUARDS.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug
having one blade wider than the other). This plug will fit into the power outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact qualified personnel to install the proper outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.
ASSEMBLY INSTRUCTIONS
H
C
A
E
G
D
F
B
I
J
K
Figure 1
BSF1731
Q
A. Grill Hub
B. Front Grill
M
N
C. Fan Blade Nut
D. Fan Blade
E. Rear Grill
Mounting-Ring
F. Rear Grill
G. Motor Shaft
H. Motor Housing
I. Upper Pole
L
P
O
H
J. Height Adjustment Knob
K. Lower Pole
L. Base Insert
G
T
M. Base
N. Weighted Insert
O. Weight Nut
P. Fixed Screw
R
I
S
Q. Grill Ring
R. Remote Control Housing
S. Fan Post Screw
T. Remote Control
J
Figure 2
BSF1731RC
K
BASE/POLE ASSEMBLY
Step 1: Insert lower pole into the base until the threaded end of the pole
protudes through the opening in the center of the base. Twist the pole
clockwise until locked.
Step 2: Turn the base upside down and place the weighted insert into
the base by aligning it between the two parallel ribs. Secure the base,
weight, and pole system together by tightening the weight nut to the
threaded portion of the pole. Place the base on the floor, right side up.
Step 3:Replace the height adjustment knob over the pole, slide it down
the pole, and secure it to the base by turning clockwise.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN HEAD ASSEMBLY
TRIM CAP
Figure 2
Figure 4
Figure 3
Figure 5
Step 1: Position the rear grill over the motor shaft, making
certain the cut outs in the center of the grill fit over the prongs on the
motor housing. Please make sure the rear grill fits securely against the
motor housing.
Step 2: Secure the rear grill in its place using the rear grill mounting-
ring. Turn this ring clockwise and tighten firmly.
Step 3: Slide the fan blade, with the hollowed interior of the blade fac-
ing toward the rear grill, firmly onto the motor shaft. Make sure that the
pin through the motor shaft aligns with the groove in the back center of
the fan blade.
Step 4: Secure the fan blade onto the motor shaft by firmly tightening
the fan blade nut.
NOTE: TURN THE FAN BLADE NUT COUNTER-CLOCKWISE
Step 5: Align the tabs on the grills, and press grills firmly against each
other. (Figure 2)
Step 6: Place grill ring over attached front and rear grills with connect-
ing link centered over the top of the grill. Make sure to fit the grooves
on the underside of the grill ring over the edge of the front and rear
grills. (Figure 3)
Step 7: Secure the grill ring to the front and rear grills using the fixed
screw. Place the trim cap over the connecting link and snap into place.
(Figures 4 & 5)
FINAL ASSEMBLY
FOR REMOTE VERSION
Step 1: Slide the remote control housing over the upper pole and
secure the housing with the fan post screw.
FINAL ASSEMBLY
FOR NON-REMOTE VERSION
Step 1: Slide the threaded end of the fan head pole, into the top of the
pole. Holding the neck of the fan, turn it counterclockwise until it locks
into position.
NOTE: Make sure the top of the upper pole is facing away from you
when placing the fan head into the pole.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
FOR REMOTE VERSION
Step 1: Insert 2 AAA batteries into the back of the remote control.
Remote Control: Your remote control requires 2 AAA batteries for operation.
To install the batteries, simply depress the back of the remote with your
thumb on the spot marked OPEN. Insert batteries according to the diagram
shown inside. Replace cover.
Step 2: Set the fan base on a dry level surface.
Step 3: Plug cord into any standard 120V AC outlet.
Step 4: To turn the fan on press the POWER button on the remote control
or on the touch-key pad.
Step 5: The speed is adjustable by pushing either the speed button on the
remote control, or on the SPEED button on the touch-key pad. Push this
button first for LOW, again for MEDIUM, and a third time for HIGH. Push a
fourth time to repeat the sequence. To turn the fan OFF, push the OFF
button on the remote control, or on the touch-key pad.
Step 6: To oscillate the fan head, push the button marked OSCILLATE on
the remote, or OSCILLATE on the touch-key pad. Push a second time to
stop oscillation.
Step 7: This fan is equipped with a 4-setting timer. (1hr, 2hr, 4 hr, 8hr). To
activate the timer, push the TIMER button on the remote control, or the
TIMER button on the touch-key pad. Continue to push the TIMER button
to cycle through your setting options. Push the button twice to repeat the
sequence.
Step 8: For a natural breeze movement, push the button marked MODE
on the remote control or the touch-key pad. This BREEZE mode will imi-
tate wind gust by varying the fan speeds between fast and slow. By
pressing the MODE button a second time, you activate the SLEEP setting.
This function slows the fan speed down, and when used in conjunction
with the timer settings, will ultimately turn the fan off. Press the Mode
button a 3rd time for BREEZE and SLEEP combined.
NOTE: Timer can be used in conjunction with several other functions. For
example: Sleep + 4hr. TIMER causes the fan to gradually slow down over
4 hours and eventually turn off.
OPERATING INSTRUCTIONS
FOR NON-REMOTE VERSION
Step 1: Set the fan base on a dry, level surface.
Step 2: Please make sure the Speed Control Knob is in the "Off" position. Plug
the cord into any standard 120 V A/C outlet.
Step 3: The SPEED is adjusted by moving the knob left or right to the
desired setting.
Step 4: The OSCILLATION Knob is located on the top of the fan motor hous-
ing. To start oscillation, push knob down. To stop oscillation, pull knob up.
ADJUSTMENT INSTRUCTIONS
TILT ADJUSTMENT
Follow these instructions to tilt the fan head for upward angle
air movement.
Step 1: To change the tilting angle of the fan head, move the fan head to the
desired position. This will work only on RC model On the non-remote,
the customer needs to loosen the tilt adjustment knob first.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HEIGHT ADJUSTMENT
Step 1: Twist the height adjustment know counterclockwise and slide
the fan up or down to the desired position and then tighten the knob.
WARNING: MAKE SURE TO SUPPORT THE FAN HEAD
ASSEMBLY WHEN ADJUSTING THE HEIGHT, AS THE
WEIGHT OF THE FAN HEAD MAY CAUSE THE UPPER
POLE TO COLLAPSE.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for your Bionaire®
stand fan. Please remember:
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner, ben-
zine.
(See instructions for fan head assembly)
Step 1: To access the fan blade, remove the front grill and the fan blade
nut.
Step 2: Clean the fan blade, both front and rear grills with a soft cloth
moistened with a mild soap solution.
Step 3: Replace blade, tighten the fan blade nut, and securely fasten
the front grill.
FAN HEAD, BASE, AND POLE CLEANING
Using a soft, moist cloth, with or without a mild soap solution, carefully
clean the fan base, pole, and head. Please use caution around the
motor housing area. Do not allow the motor or other electrical compo-
nents to be exposed to water.
FAN STORAGE INSTRUCTIONS
Your fan can be stored in the off-season either partially disassembled or
assembled. It is important to keep it in a safe, dry location.
• If stored disassembled, we recommend using the original (or appropri-
ately sized) box.
• If stored assembled or partially assembled, remember to protect the
fan head from dust.
FAN SERVICE INSTRUCTIONS
1. Do NOT attempt to repair or adjust any electrical or mechanical func-
tions on this unit. Doing so will void the warranty.
2. If you have any questions regarding this unit’s operation or believe
any repair is necessary, please call 1-800-788-5350 to speak with a
consumer service representative.
3. If you need to exchange the unit, please return it in its original carton,
with a sales receipt, to the store where you purchased it. If you are
returning the unit more than 30 days after the date of purchase, please
see the enclosed warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
WARRANTY
Bionaire® warrants to the first retail purchaser, for FIVE (5) YEARS from the
date of original purchase, either to repair or replace at its option, without
charge (parts and labor), any supplied or manufactured part of this heater
which, upon inspection by an authorized service center, proves to have
failed in normal use due to defects in material or workmanship, or, at its
option, to replace the unit.
Operation under conditions other than those recommended or at voltages
other than the voltage indicated on the unit, or any attempts by
unauthorized personnel to service the unit or modify it, will render the
guarantee void.
Bionaire® shall not be liable for any personal injury, property damage or
any incidental or consequential damages of any kind (including water
damage), resulting from defects, malfunctions, misuse, improper
installation or alteration of the product.
BIONAIRE® EXPRESSLY DISCLAIMS ALL
RESPONSIBILITY FOR CONSEQUENTIAL
DAMAGES OR INCIDENTAL LOSSES
CAUSED BY USE OF THIS PRODUCT.
The provisions of this warranty are in addition to, and not a
modification of, or subtraction from the statutory warranties
and other rights and remedies contained in any applicable
legislation and to the extent that any such provision purports
to disclaim, exclude or limit any such statutory warranties or
other rights or remedies, such provisions shall be deemed to be amended
to the extent necessary to comply therewith.
For Warranty Service, please call 1-800-788-5350
in North America.
A Bionaire® consumer service representative will help determine which is
the best procedure in order for your fan to be repaired.
KEEP THIS NUMBER FOR FUTURE REFERENCE.
P.O. BOX 400
MILFORD, MA 01757
USA
6385 Shawson Drive
Mississaugua, Ontario
Canada, L5T 1S7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|