|
TTGO121 Powered Lighter Socket Mount for TomTom GO GPS
Package Contents:
(1) CM097-2 - 12V / Lighter socket mount with power outlet
(1) APTTGO520 - Adapter plate for TomTom GO 520, 530, 720,
730, 920, 920T, and 930 models
TomTom Device Compatibility:
APTTGO520 -
Adapter plate for
TomTom GO
- For use with TomTom GO - 520, 530, 720, 730, 920, 920T, and 930 models
TomTom, ONE, and GO are product names, trademarks, or registered
trademarks of TomTom International BV. Arkon Resources, Inc. is not
affiliated with TomTom International BV.
CM097-2
Lighter socket mount
Do not place mount in or near an air bag deployment zone
or where it will obstruct view of the road.
!
Mount Installation Instructions
TomTom GO Adapter Plate Installation
Step 1. Insert the DC Power plug (A) completely into the vehicle’s
Step 1. Attach the adapter plate by sliding it up into the slot on
the back of the TomTom GO 520, 530, 720, 730, 920, 920T,
or 930 device as shown below.
12V / lighter socket.
Step 2. Adjust the angle of the pedestal arm and rotatable dual
T head by tightening the wing nuts (B) to the desired
placement angle.
A
12 V Powering
Outlet Socket
B
TomTom GO Device Attachment
Step 1. Attach the device cradle to the pedestal by inserting
the dual T-Tabs of the pedestal (C) into the T-slots of
the adapter plate (D).
D
C
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
!
The Mobile Mounting Specialists™
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or
air bag deployment.
Consumer Hotline:
Arcadia, CA 91006 USA
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9am-5pm, PST
Designed in USA | Made in Taiwan
© Copyright 2008 Arkon Resources, Inc.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Download from Www.Somanuals.com. All Manuals Search And Download.
|