Binatone GPS Receiver TT136 User Manual

|
TT136 Bendable Adhesive Dash or Console Mount for TomTom® GPS  
Package Contents:  
(1) CM021-SB-2 - Bendable adhesive dash mount  
APTTEP  
Adapter Plate  
for EasyPort  
(1) APTTO - Adapter plate for TomTom ONE™ Series  
(1) APTTOXL - Adapter plate for TomTom ONE XL / XLS™ Series  
(1) APTTGO520 - Adapter plate for TomTom GO™ Series  
(1) APTTEP - Adapter plate for TomTom EasyPort™ Series  
Check Compatibility  
Patent  
Pending  
TomTom Device Compatibility:  
TomTom ONE 130, ONE 130-S (TomTom EasyPort Mount)  
TomTom ONE (US Edition, US 3rd Edition)  
TomTom ONE XL (1st Edition) - TomTom ONE XL-S (1st Edition)  
TomTom ONE 22, ONE 22 Regional, ONE 22 Regional Traffic  
TomTom XL 22, XL 22 Regional (TomTom EasyPort Mount)  
TomTom XL 330, XL 330-S (TomTom EasyPort Mount)  
TomTom ONE UK / EUROPE (NEW Edition aka 2nd Edition, 3rd Edition)  
TomTom GO 520 / 530 / 720 / 730 / 920 / 920T / 930  
APTTO  
Adapter plate for  
TomTom ONE  
CM021-SB-2  
Benadble Adhesive  
Dash Mount  
Check Compatibility  
APTTOXL  
APTTGO520  
Adapter plate for  
TomTom GO  
TomTom, ONE, GO, and EasyPort are product names, trademarks, or registered trademarks of  
TomTom International BV. Arkon Resources, Inc. is not affiliated with TomTom International BV.  
Adapter plate for  
TomTom ONE XL  
and XL•S  
Check Compatibility  
Check Compatibility  
Do not place mount in or near an air bag deployment zone  
or where it will obstruct view of the road.  
!
Dash or Console Installation  
TomTom ONE, ONE XL, and ONE XL • S Plate Installation  
Step 1. Choose the best location on vehicle to place the mount.  
Step 1.  
Slide the adapter plate up into the grooves on the back of the  
TomTom ONE, ONE XL, or ONE XLS.  
Clean off dash or console surface with alcohol cleaning pad and  
let dry. (A) Do not attempt application of the dash mount if the  
temperature is below 68° F (20°C).  
Remove paper liner from adhesive on base (B) and affix adhe-  
sive to the dash or console. (Let stand at room temperature for  
24 hours before using.)  
A
B
TomTom GO Adapter Plate Installation  
Step 1.  
Attach the adapter plate by sliding it up into the slot on the  
back of the TomTom GO 520, 530, 720, 730, 920, 920T, and 930  
models device as shown below.  
Step 2. Adjust the angle of the pedestal head by bending the flexible  
metal strip (C). Rotate the strip and tighten the base cap. (D)  
D
C
Safety Precautions  
!
Do not install Arkon products over an air bag cover or within the air  
bag deployment zone. Arkon Resources, Inc. assumes no responsi-  
bility of liability for injury or death as a result of car crashes and/or  
air bag deployment.  
The Mobile Mounting Specialists™  
Consumer Hotline:  
Arcadia, CA 91006 USA  
Designed in USA | Made in China and Taiwan  
© Copyright 2008 Arkon Resources, Inc.  
USA (800) 841-0884  
INT’L (626) 254-9005  
Monday - Friday 9am-5pm, PST  
Arkon is not responsible for any damages caused to your car, your  
device, or yourself due to the installation or use of this pedestal mount.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Headphones F8E477 User Manual
Black Box Network Router AC1132A User Manual
Bushnell Binoculars 18 0833 User Manual
Cabletron Systems Network Card W85 User Manual
Canon All in One Printer MX492 User Manual
Cary Audio Design Stereo Amplifier 2125 User Manual
Casio Watch 1890 1 User Manual
Casio Watch ANA3H3E 1 User Manual
Chariot Carriers Stroller CX 1 User Manual
Chromalox Electric Heater PG424 1 User Manual