BIPAC-7500G
802.11g ADSL VPN Firewall Router with
3DES Accelerator
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator
For more detailed instructions on configuring and using
the 802.11g ADSL VPN Firewall Router, please refer to
the on-line manual.
Package Contents
BIPAC-7500G ADSL VPN Firewall Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
Console (PS2-RS232) Cable
AC-DC power adapter (12V DC, 1A)
ADSL Line Filter (Optional)
(Note: Included for Australia)
Two 5dbi Antennae
This Quick Start Guide
ꢀ
ꢀ
ꢀ
Do not use the BIPAC-7500G ADSL VPN Firewall Router in high
humidity or high temperatures.
Do not use the same power source for the BIPAC-7500G ADSL
VPN Firewall Router as other equipment.
Do not open or repair the case yourself. If the BIPAC-7500G ADSL
VPN Firewall Router is too hot, turn off the power immediately and
have it repaired at a qualified service center.
Warning
ꢀ
ꢀ
Place the BIPAC-7500G ADSL VPN Firewall Router on a stable
surface.
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
Attention
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
The Front LEDs
LED
Meaning
1
2
3
PWR
Lit when power is ON.
SYS
Lit when the system is ready.
LAN port 1
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
4
5
6
7
LAN port 2
LAN port 3
LAN port 4
WLAN
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps
Blinking when data is transmitted/received.
Lit green when the wireless connection is established. Flashes
when sending/receiving data.
10 MAIL
PPP
13 ADSL
Flash when there is Email in your configured Email account.
Lit when there is a PPPoA / PPPoE connection.
11
Lit when successfully connected to an ADSL DSLAM (“linesync”).
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator
The Rear Ports
4
5
3
2
6
1
Port
Meaning
1
2
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
LINE
Connect a PS2/RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
CONSOLE
LAN
3
4
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
1X
—
4X
(RJ-45 connector)
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
RESET
6 seconds above: restore to factory default settings (this is used
when you cannot login to the router. E.g. forgot the password)
PWR
5
6
Connect the supplied power adapter to this jack.
Power ON/OFF switch
Power Switch
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Connecting Your ADSL Router
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR, SYS and WLAN LEDs are lit steadily and that the relevant LAN LED
is lit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and
click OK to finish the configuration.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and click
Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Billion BIPAC-7500G - 802.11g ADSL VPN Firewall Router with 3DES Accelerator
Configuring Your ADSL VPN Firewall Router
To configure this device, you must have IE 5.0 /
Netscape 4.5 or above installed
Verifying Your Local Network Connection with the Device
To see if this ADSL Router is
visible on the local network, go
to Start / Run. In the Run dialog
box, type “ping 192.168.1.254”
then press OK.
A command prompt window will
pop out.
If your ping is
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
“Request timed out” in the
command prompt window. You
may need to check your set up.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Connecting to the Router
Open the web browser and type
http://192.168.1.254 in the
browser’s address box. This
number is the default IP address
for this router. Press Enter.
A user name and password
window will appear. The default
User Name and Password are
“admin” and” admin”. Press
OK to logon to the router
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the User’s Manual.
If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer
where you purchased this product.
Contact Billion
AUSTRALIA
Hotline: 1300 139 159, 7 days a week.
©2004 Billion Electric Co, PC Range P/L. All Rights Reserved.
WORLDWIDE
Mac OS is a registered Trademark of Apple Computer, Inc.
Windows 98, Windows NT, Windows 2000, Windows Me and Windows XP are registered Trademarks of Microsoft
Corporation.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|