Beyonwiz Stereo Receiver DP S1 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

Read this manual carefully before using this product. The cautions

described below contain important information about safety, and are

categorized into: Danger, Warning and Notice. The company will not be

responsible for accidents or damage resulting from careless handling by

the user.

Do not repair, disassemble or modify this apparatus yourself. It can

cause fire or electric shock. If internal checking or maintenance is

needed, please contact your service center or agency.

Do not block or cover any ventilation opening. A fire can result from

overheating.

Turn off and unplug the power as quickly as possible during electric

storms. Failure to do so can result in fire or electric shock.

Remove the antenna’s power plug from the outlet as quickly as

possible during electric storms. Failure to do so can result in fire or

electric shock.

DANGER

If the user mishandles the product, there is loss of life risk or

critical injury.

Do not drop the apparatus (for example by putting it in a place where

it may fall) or subject it to impact. The product might be damaged. If

it is damaged, please turn off the power and remove the plug from

the power outlet, fire or electric shock may occur.

Connect the power cord only to A/C outlets as specified by the user

manual or product specification. If the power code is connected to a

non-specified A/C outlet, it can result in fire or electric shock.

The product must not be exposed to water or liquid of any kind, or be

exposed to drips or splashes. It can result in fire or electric shock.

Do not place heavy objects, including the product itself, on top of the

power cord. If it is damaged, it can result in fire or electric shock.

Do not place metal objects on top of the apparatus. If metal objects

fall onto the apparatus, it could result in fire or electric shock.

Never touch the power cord with wet hands. It can result in an

electric shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

NOTICE

If the product is mishandled, it might cause minor damage.

WARNING

If the product is mishandled, the user might receiver a serious

or minor injury. Damage or loss to the user’s property may also

occur.

If the apparatus becomes marked, clean it gently with a soft cloth or

towel. Never use chemical solvents such as benzene, thinner, acetone

or other solvents. The surface of the apparatus might become

discolored and the paint might peel.

The product must not be exposed to water or liquid. If the apparatus

is exposed to drips or splashes, it might cause a problem that may

not be repairable.

Do not place or keep the apparatus in the following situations. Doing

so might cause problems.

Do not repair, disassemble or modify this apparatus yourself. It can

be seriously damaged, possibly beyond repair.

- Where it is too hot or cold.

- Where there is high humidity.

Turn off the power and unplug the power cord as quickly as possible

during electric storms. The apparatus may be damaged.

Remove the antenna’s power plug from the outlet as quickly as

possible during electric storms; otherwise the apparatus might be

damaged.

- Where there are excessive temperatures, for example in front of

air-conditioners or heating vents.

- Where there is dust or soot.

- In confined areas where the heat cannot be released.

- Where it is exposed to direct sunlight.

Data recorded in the HDD may be lost due to a shock, lightening or

electricity failure. The user must back up his or her own data, and the

company does not take any responsibility for failure to do so.

Turn the apparatus off and unplug the power cord if the unit is to be

unused for a long period of time.

Do not place heavy objects on top of this apparatus. It might cause

malfunction or damage.

If the apparatus is so seriously damaged that it cannot be repaired,

or has stopped working altogether, dispose of it properly in

accordance with the local laws or regulations in your area.

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

About the internal hard disk drive

The internal hard disk drive (HDD) is a fragile piece of equipment.

Please use the apparatus within the guidelines below to protect against

possible HDD failure or to protect against accidental loss.

Do not move the apparatus while it is on.

This symbol is intended to alert the user to the presence of

Install and use the apparatus on a stable, level surface.

Do not block the top ventilation holes.

uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

Do not use the apparatus in excessively hot or humid places, or in

places that may be subject to sudden changes in temperature.

Sudden changes in temperature can cause condensation to from

inside the apparatus. This can be a cause of HDD failure.

While the apparatus is switched on, do not unplug it from the wall

socket or switch the electricity off from the circuit breaker.

Do not move the apparatus immediately after switching it off.

If there is a power failure while the apparatus is on, some data on the

HDD might be lost.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

The HDD is very delicate. If used improperly or in an unsuitable

environment, the HDD may fail after a few years of use. Signs of

problems include playback unexpectedly freezing and noticeable block

noise (mosaic) in the picture. Sometimes there will be no warning

signs of HDD failure. If the HDD fails, no playback of recorded

material will be possible. In this case the HDD needs to be replaced

by a qualified technician.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

This manual is protected by copyright laws.

Copy, use, reproduction of this manual in part or whole without beyonwiz's

prior written permission is prohibited.

Disclaimer

The manufacturers, distributors and agents are not liable to any kind of

damage caused by the use of the information contained in this manual.

The instruction and descriptions which this manual contains are based on

the time of this manual's production.

The manufacturer constantly updates it with new functions and technology.

All the specifications are subject to change without prior notice.

Trademarks

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

Manufactured under the license from Dolby Laboratories. "Dolby" and the

"double-D" symbol are trademarks of Dolby Laboratories.

"DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc.

DVD Logo is a trademark of DVD Format/Logo Licensing Corp., registered in

the U.S., Japan and other countries.

The USB-IF Logos are trademarks of Universal Serial Bus Implementers

Forum, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Welcome Message

5. STB & PVR Function

1. Basic STB Function

2. Service Edit

3. PVR Function

4. EPG

Precaution

1. Package Contents

2. Introduction

6. File Playback Function

1. DP-S1 Highlights and Features

2. Front Panel

1. Exploring Contents and Playback

2. Contents Playback

3. Rear Panel

4. Remote Control

5. Front Display

7. Internet Service

8. Advanced Setup

3. How to Connect

1. Miscellaneous

2. Management

1. A/V Connection

2. Antenna Connection

3. LAN and W-LAN Connection

9. Set Remote Control

1. Automatic Code Search

2. Manual Set

4. Quick Setup

1. Start Quick Setup

2. Configuration

3. Network

Warranty Conditions

Contact Information

Download from Www.Somanuals.com. All Manuals Search And Download.

Package Contents

1. Package Contents

The following elements are included in the gift box.

Please check all package contents before using your product.

DP-S1

Remote Control

Batteries of

the Remote Control

(AAA size x2)

NOTICE: Two side panels are packaged separately.

Please assemble the panels as illustrated on the carton box.

User Manual

RCA Audio/Video Cable

Component (Y/Pb/Pr) Video Cable

Ethernet Cable

W-LAN Antenna (x2)

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

2. Introduction

2. Front Panel

1. DP-S1 Highlights and Features

Touch Buttons (x8)

As a HD (High Definition) multimedia epicenter, the DP-S1 supports

various ways of connecting to HD TVs and audio systems; HDMI port

combining with HD video decoders, which support MPEG-2, MPEG-4,

H.264 and WMV9, give you the true HD digital A/V environment.

Moreover, by supporting USB host ports and networking, the most

frequently used ways of sharing contents, the DP-S1 gives unlimited

flexibility to access and play multimedia content.

(Menu, Ch -, Ch +, Vol -, Vol +, OK, Stop/Eject, Standby)

DVD Loader

Slot Door

(SD/MMC/Memory Stick, CF Card, USB)

Side Panel (2EA)

Dual Tuner

DVB-T Compliant with Internal Loop through

Video Output

Audio Output

Composite, S-Video, Component (Y, Pb, Pr), HDMI

3. Rear Panel

5.1ch RCA with Dolby Digital and DTS decoding

Coaxial and Optical S/PDIF Output, HDMI

Interface

DVD Loader

10/100 Ethernet Port, 802.11g W-LAN

2 USB Host Ports (USB 2.0 Compliant)

Memory Card Slots: SD, CF, MMC and Memory Stick

1. ANT IN

5. OPTICAL AUDIO

6. W-LAN ANT

7. COMPOSITE

8. S-VIDEO

9. COMPONENT (Y/Pb/Pr)

10. 5.1 CH AUDIO

11. ETHERNET

Multimedia

Playback

Movie: wmv, avi, mpg, vob, mp4, asf, tp, trp

Music: mp3, wma, aac, ac3

2. RF LOOP OUT

3. HDMI

Photo: bmp, jpeg, png

4. COXIAL AUDIO

12. USB

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

STANDBY

EJECT

STB

Switch the DP-S1 between Operation and Standby mode.

Open/Close of DVD Tray.

4. Remote Control

Set Remote Control to Work for the DP-S1.

Change to TV mode or Radio mode.

Change Video Output. (Refer to page 17. for more information)

Control standard TVs with remote control.

Go to SETUP Menu.

TV/RADIO

TV-OUT

The enclosed remote control can also be used to control a TV set

provided by major TV manufacturers. The STB and TV buttons set the

remote control to control the DP-S1 and TV set respectively. You can

check the operating mode of remote control from the red backlight of

the STB and TV buttons.

SETUP

WizTV

LIVE

Go to Internet Service. (for future use)

Go to Live TV.

FILE PLAY

VOL +/-

CH +/-

MUTE

Go to File Play.

Adjust the volume. (Increase/Decrease)

Change TV or Radio Service.

Enable or disable the Audio output.

Show service information.

INFO

FAV

Show Favorite Service List.

GUIDE

POP-UP

Show EPG (Electronic Program Guide).

Show advanced menus of the current mode.

Show Service List.

LIST

EXIT

Return to the previous menu or Cancel.

UP/DOWN/LEFT/

RIGHT

Move the indicator on the menu mode.

Select an item on the menu or Confirm.

Recall the previously viewed (or listened) service.

Optional key for Teletext service

Check an item while selecting another on the same step.

Numeric buttons.

RECALL

RED

GREEN

YELLOW

BLUE

0~9

SLEEP

Set sleep time of the DP-S1.

Zoom on DVD Play mode.

Play Content.

ZOOM

PLAY

STOP

Stop playback.

PAUSE

SLOW FWD

REW

Pause playback.

Slow Forward.

Rewind.

Fast Forward.

Go to the previous track or file, and continue playing.

Go to the next track or file, and continue playing.

Start recording.

REC

SUBTITLE

TELETEXT

SOUNDTRACK

Change Subtitle language.

Show Teletext.

Change Soundtrack language.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

5. Front Display

Indicates hard disk space used.

The front display window gives you easy way to check the status of the

DP-S1.

Lights when there is no space left on the HDD.

Lights when there is no time information.

Lights when a timer recording is programmed in standby mode.

Lights when the signal comes out via HDMI.

Lights when the signal is HD (High Definition).

Indicates the resolution of video output.

Lights when the video output is in Progressive Scan mode.

Lights when Ethernet connection is set up and enabled.

Lights when Wireless LAN connection is set up and enabled.

Lights when USB devices or memory cards is connected.

Indicates operation mode (TV or Radio).

Indicates the current recording status.

Lights when Time Shift is enabled.

Indicates playback of content with light on the outer circle and

revolving on the inner circle.

Indicates the audio format of content.

Lights on FR and FL when the audio output is set to stereo.

Lights on all indicators when the audio output is 5.1CH.

No light when the audio output is Pass-through.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Connect

3. How to Connect

1. A/V Connection

1-1. Video Connection

Depending on your A/V equipment including TV which you would like to

connect to, there are various ways you can connect the DP-S1 and A/V

equipment. To make the best connections, please refer to the manual of

your TV, stereo system or other equipment which you would like to

connect to.

To connect your DP-S1 to your TV or display, you have the following

options;

Only one connection can be done at a time.

The following order of video connection is based on the quality.

To get High Definition playback of High Definition content, we

recommend you to connect your High Definition display with a HDMI

cable. HDMI supports Standard, Enhanced or High-Definition Video and

Multi-Channel Audio in a single cable. (HDMI cable can be purchased

separately)

HDMI (the cable can be purchased separately)

Component (Y/Pb/Pr)

S-VIDEO (the cable can be purchased separately)

Composite (VIDEO)

If your TV does not support HDMI but has a DVI input, a HDMI to DVI

converter can be purchased separately. (In this case, Audio signal

output is disabled)

If you do not have a High Definition display, you can connect the DP-S1

and A/V equipment via other connection options.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Connect

2. Antenna Connection

1-2. Audio Connection

To connect your DP-S1 to your TV or audio system, you have the

following options;

Please connect your TV Antenna to the DP-S1.

Only one connection can be done at a time.

Antenna In (connecting to the roof Antenna)

RF LOOP OUT (only for bypassing the signal to another device)

S/PDIF Digital Audio output (COAXIAL, OPTICAL)

5.1 CH Analog Audio output

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Connect

3. LAN and W-LAN Connection

3-1. Connection Using a Network Router

In order to utilize the DP-S1 fully, it is strongly recommended to

connect the DP-S1 to the home network with a network router.

For this connection, the following equipments are required;

As shown in the picture, you have to connect the DP-S1 to the router

with an Ethernet cable included in the box. If you purchase a router

with a DP-S1 and have no experience of connecting a router with a PC,

please refer to user’s manual of the router and connect the DP-S1 to

the router as an additional PC. If the router has the DHCP (Dynamic

Host Configuration Protocol) server feature and it is enabled, all the

configurations for networking will be set automatically and the DP-S1 is

ready to use. For more information of configuring LAN, please refer to

Chapter 4. Quick Setup, which illustrates how to configure the LAN port.

A router with a built-in network switch.

An Ethernet cable.

A PC with Windows XP operating system.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Connect

3-2. Connection Using a Wireless Router

As shown in the picture, you have to connect the DP-S1 to the router

through wireless network. If you purchase a wireless router with a DP-

S1 and have no experience of connecting a wireless router with a PC,

please refer the user’s manual of the router and connect the DP-S1 to

the router as an additional PC. You can configure the wireless LAN of

the DP-S1 step-by-step. Please refer to Chapter 4. Quick Setup,

illustrates how to configure the DP-S1.

The DP-S1 supports 802.11g wireless LAN protocol, thus it is strongly

recommended to connect the DP-S1 to a wireless router compatible

with 802.11g protocol. For this connection, the following equipments

are required;

A wireless router with a built-in network switch.

A PC with Windows XP operating system.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Connect

3-3. Direct Connection to the PC

With this configuration, you can share contents with a PC through home

network but the DP-S1 can not access to Internet. For this connection,

the following equipments are required;

If your PC has the DHCP server feature and it is enabled, all the

configurations for networking will be set automatically and the DP-S1 is

ready to communicate with your PC. If you want to get more

information to configure your PC as a DHCP server, please contact

Microsoft Corp. If your PC does not have the DHCP server feature, you

have to disable the DHCP feature and set IP (Internet Protocol)

information manually for the DP-S1 and PC. Chapter 4. Quick Setup,

illustrates how to configure the LAN of the DP-S1 manually.

A PC with Windows XP operating system.

A crossed Ethernet cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Connect

3-4. Direct Connection to Internet

NOTE

The wireless LAN function of the DP-S1 requires more hardware

With this configuration, you can not share contents with a PC through

home network. For this connection, a crossed Ethernet cable (not

included in the box) is required. The most ISP (Internet Service

Provider) services DHCP feature. Therefore, you can connect your DP-

S1 to Internet with a crossed cable and enjoy it. If you have to

configure your DP-S1 manually, please contact your ISP for more

information.

resources of the DP-S1. Therefore, the functionality can be limited if

you are using the wireless LAN.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

4. Quick Setup

1-1. Quick Setup of Video Output Format

If the front display window indicates that the DP-S1 is ready to use but

nothing displays on the TV screen, you have to adjust the format and

resolution of the video output by pressing the TV-OUT button. The

default video output is in a SD PAL (576i) format. You can switch the

video output to a SD NTSC (480i), HD PAL (720p), HD NTSC (720p),

HDMI Auto, HDMI PAL and HDMI NTSC format successfully with the TV-

OUT button. Please refer to the following information to adjust the

video output to each of the video connection types.

This chapter guides you to set up the DP-S1 quickly so that you can

experience it’s basic features. In order to enjoy the DP-S1 fully, please

refer to Chapter 8. Advanced Setup.

1. Start Quick Setup

If A/V and antenna connection is complete, press the STANDBY button

to start. The front display window will show “Welcome”, “Loading”, and

“Live” successively. If you turn on the DP-S1 for the first time after

purchasing, there will be no digital broadcasting services stored in the

DP-S1, it will switch to SETUP MENU automatically. Otherwise, you can

enter SETUP MENU by pressing the SETUP button.

Composite/S-VHS: SD PAL or SD NTSC

Component: HD PAL or HD NTSC

HDMI: HDMI Auto, HDMI PAL or HDMI NTSC

NOTE

The TV-OUT button is developed so that you can configure the video

output of the DP-S1 when you can not see anything on the TV screen

because the video formats do not match each other.

The front display window indicates the current video format as you

press the TV-OUT button.

NOTE

If the front display shows “Setup” instead of “Live”, this means that

you have to scan the broadcasting services first. Please refer to the

next section of scanning services.

To make your configuration effective, please wait at lease 3 seconds

before pressing the TV-OUT button.

It is strongly recommended that you again configure the video format

more precisely in the Setup menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

1-2. Basic Operation

1) Enter and Exit Setup Menu

You can enter the SET-UP MENU with the SET-UP button on the remote

control and exit to the previous operation mode such as LIVE or FILE

PLAY with the EXIT button.

2) Setup Menu Structure

The SET-UP menu is grouped in four parts: CONFIGURATION, NETWORK,

MISCELLANEOUS and MANAGEMENT. Firstly, you have to choose one of

these categories (main category) which are placed on the top menu (a

horizontal bar) as graphical icons. As you select it with the LEFT/

RIGHT buttons, the left menu (a vertical bar) displays different sub-

categories according to your selection on the top menu. If you choose

one category on the left menu with the UP/DOWN buttons, the items

belong to the sub-category will be listed on the item list. You can enter

the item list with the OK button to adjust the configuration. In the item

list, the LEFT/RIGHT/ UP/DOWN buttons will not work for changing

your selection on the top or left menus: these buttons are used to

choose an item on the item list to change its configuration. You can exit

from the item list with the EXIT button.

LEFT/RIGHT buttons: Select an item on the top menu. (Horizontal)

UP/DOWN buttons: Select an item on the left menu. (Vertical)

OK button: Enter the item list.

EXIT button: Exit from the item list.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

3) How to Change Configuration

In the setup menu, there are several ways to change the configuration.

This manual explains how to change the configuration, here are three

cases which are used frequently.

Setup using the NUMERIC buttons: The NUMERIC buttons are used

to set a configuration with numbers such as time information. You can

also move the cursor to left or right with the LEFT of RIGHT buttons

while you are editing the configuration. You can set the change with

the OK button or cancel it with the EXIT button.

Selection on a pop-up menu: You can choose an option on the pop-up

menu. If you press the OK button, the pop-up menu will be displayed.

Select one option with the UP/DOWN buttons and press the OK

button. If you do not want to change settings, press the EXIT button.

The pop-up menu will disappear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

On-screen keyboard: If you need to input alphabetic characters, an

on-screen keyboard will be displayed. You can move the cursor with

the UP/DOWN/LEFT/RIGHT buttons and select the letters with the

OK button. The YELLOW and BLUE buttons work as a space and

backspace keys respectively. You can also clear your inputs by

selecting “Clear All” with the OK button on the screen.

If you need to input numbers or special characters, please press the

GREEN button. The screen keyboard turns to numbers and special

characters. You can also exit and return to small characters with the

GREEN button.

After the input, you can save it by selecting “Save & Exit” with the

OK button. If you do not want to save, please press the EXIT button.

If you need to input upper case characters, please press the RED

button. The screen keyboard will changed to upper case characters

and you can input the same way. You can return to lower case

characters with the RED button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

2. Configuration

2-1. Time Setting

Please set the current date and time. The date and time information will

be the reference for the timer recording. Therefore, you have to

configure the time and date information precisely. You can also select

preferred date and time formats. The following picture illustrates the

items which you configure to set the time and date.

Mode: You can select how to set the date and time. Please press the

OK button then you get a pop-up menu. You can choose one with the

UP/DOWN buttons and select it with the OK button. Under the

“AUTO” mode, the date and time will be set automatically according

to the GMT information and the time-offset you configured. To obtain

correct time under “auto” mode you must enter the correct time

offset from GMT according to what state you are in. Under the

“MANUAL” mode, you have to set the date and time manually using

the numeric keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Date Format: Please select a display format for the date either

“DD/MM/YYYY”, “MM/DD/YYYY” or “YYYY/MM/DD” on a pop-up menu.

(DD-day, MM-month, YYYY-year)

NOTE

Under the “AUTO” mode, the GMT information can be received

automatically from DTV station when you turn on the DP-S1 and

watch a program. But some DTV station doesn’t send the GMT

information or sends wrong information.

Time Format: Please select how to display the time: either a 12-hour

format or a 24-hour format. You will get a pop-up menu if you press

the OK button.

Your selected date and time format will be applied to all the date and

time displayed on the graphical menus.

Time Offset: Time offset means the difference between GMT and your

local time zone. For example, the time zone of Sydney, Australia is

GMT + 10:00 and +10:00 is the time offset of Sydney. Please press

OK button to change the time offset. You will get a list of areas as a

pop-up menu. You can select an area where you live to set the time-

offset. Please add +1:00 for daylight saving time if used in your

region.

Time offset is activated under the “AUTO” mode only.

Current Time: Under the “AUTO” mode, current date and time will be

displayed and you can not change it. Under the “MANUAL” mode, you

have to set the date and time information manually. To change the

date and time, please press the OK button and set with the

NUMERIC buttons. You can save it with the OK button. If you want

to modify before you save it, please use the UP/DOWN/

LEFT/RIGHT buttons to place the cursor on the digit you want to

change.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

2-2. A/V Output Setting

1) Video Outputs

You have to set the video and audio configuration according to your TV

set. Please make sure the video and audio port of the DP-S1 is

connected to your TV set.

Video Type: You can select either PAL for NTSC format. Most TV sets

support the PAL format in Australia.

TV Aspect Ratio: Please select either 4:3 or 16:9 according to your TV

screen ratio.

The A/V Output menu consists of two parts; the video output and the

audio output. You can change the configuration of the video and audio

outputs with pop-up menu. Please press the OK button to get a pop-up

menu for each item.

16:9 Display format: You have two options to display picture in 16:9

format on your 4:3 TV set: Letter Box or Pan&Scan.

- LetterBox: You can see the full screen of 16:9, but the top and

bottom edges of your screen display black horizontal bars.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

- Pan&Scan: The picture is displayed in full on your 4:3 TV screen,

but left and right sides of the original picture cannot be displayed.

NOTE

The component video output supports SD (576i for PAL and 480i for

NTSC), 480p, 576p, 720p and 1080i.

If you set the video output resolution as HD (more than 576p), the

composite and S-Video outputs will be disabled automatically.

Please note that your TV set can not display anything if you set the

resolution of the video outputs higher than the maximum resolution

that your TV set can accept.

The HDMI setting, outputs the audio in digital format as well.

Component Video: It is recommended to set the resolution of

component video output to fit to your TV set for the best quality

display. Please check the manual of your TV set to get the maximum

resolution for the component video input.

HDMI Video: If you set the HDMI output as Auto, the DP-S1

configures the best format of HDMI suitable for your TV set

automatically. But some TV sets do not support the auto-

configuration function. In this case, you have to set the resolution

manually: 480i, 480p, 576p, 720p or 1080i. Please check the manual

of your TV set to get the maximum resolution for the HDMI video

input.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

2) Audio Outputs

NOTE

The DP-S1 supports 5.1ch audio in an analog format with the Dolby

Digital and DTS decoders. It also supports digital outputs with optical

and coaxial ports.

If you set the audio format as 2ch, the DP-S1 mixes down 5.1ch

audio source to 2ch audio.

If the content of a channel broadcasted has 2ch audio source, the DP-

S1 can not expand the 2ch audio source to 5.1ch audio format.

Therefore, you can only hear sound from the front speakers even

though you have connected a 5.1ch speaker system and set the DP-

S1 as 5.1ch audio.

Audio Format: If you only have a stereo speaker system, you have to

set the audio format as 2ch. If you connect a 5.1ch speaker system

to the DP-S1, choose 5.1ch for the best performance. In order to

decode an audio source with an external audio decoder system, set

the audio format as pass-through. In this setting, the analog audio

output will automatically be disabled.

Unless you set the audio format as 2ch when you connect stereo

speakers to DP-S1, you can not hear sound of 5.1ch source properly.

S/PDIF Output: Enables the digital audio output through the coaxial

and optical ports.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

2-3. Service Scan

Antenna DC (+5V) Power: You can supply DC (+5V, max. 100mA)

power to the indoor antenna through the antenna cable. Please make

sure that your external antenna is an active type, which means that

the antenna requires external DC power to enhance the sensitivity,

before you supply DC power to the antenna.

Before watching a broadcasted program, you need to scan all the

services first. The scanned services will be stored in the non-volatilizing

memory. Therefore you don’t have to scan the service again unless you

delete all the information of the service stored in the memory. If there

are no services scanned previously, the service scan page will be

presented automatically.

Scanning Range: You can scan over all channels (VHF and UHF) by

selecting the “FULL” option. If you want to scan over specific

channel(s), please select the “PARTIAL” option. In this case, you have

to set the start and end channels manually.

Start Channel: This menu will be enabled when you choose the

“PARTIAL” option. Please press the OK button to select the start

channel.

End Channel: This menu will also be enabled when you choose the

“PARTIAL” option. The end channel must be greater than the start

channel.

DANGER

IF THE ANTENNA IS PASSIVE TYPE, THE DC POWER WILL DAMAGE

THE ANTENNA AND THE DP-S1 ITSELF.

You can select the options for each item with a pop-up menu. Please

press the OK button to get a pop-up menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Start Scan: After selecting your scanning range, you can “start

scanning”. Select Start Scanning and then press the OK button. On

the screen, the scanning window appears and displays the process.

NOTE

You can not select an end channel smaller than the start channel.

If you scan over all the channels with the “FULL” option, the previous

service information including the service list information and your

favorite lists will be erased automatically.

If you scan over specific channel(s) with the “PARTIAL” option, you

can add the new service to your previous channel list.

Now, you are ready to watch live television by pressing the LIVE button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

3. Network

3-1. Setting

The DP-S1 supports two networking interfaces: Ethernet and wireless

LAN. You can use one of these interfaces at a time. To use the wireless

LAN interface, you have to prepare a wireless router. This section will

guide you how to configure the network interfaces.

The first step is to select an interface and configure it. You can select

this in the Network Device menu. You will get a pop-up menu by

pressing the OK button. If you want to use the Ethernet interface,

please select the “LAN” option. You can set the wireless LAN interface

by setting the “Network Device” menu as “W-LAN”.

NOTE

The wireless LAN interface requires more hardware resources such as

processing power and memory capacity. Therefore, some features will

be limited if you use a wireless LAN interface.

The wireless LAN interface of the DP-S1 is compatible with IEEE

802.11g. Therefore it is strongly recommended to connect the DP-S1

with a wireless router compatible with IEEE 802.11g protocol for

maximum performance.

The wireless LAN interface requires additional configuration to set a

secure channel of communication. When using a wireless LAN

interface you at risk from unauthorized users getting into your

network or devices. This is at customers own risk.

NOTE

If you select “Disable” option, all network devices will be disabled

even though you configure them properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

1) LAN Setting

If you select the “LAN” option on the “Network Device” menu, all the

items to be configured for the Ethernet interface will be displayed.

DHCP: If you want to get the all the configuration from the router and

set automatically, please select the “Enable” option. In this case, the

rest of the items are disabled to select because you don’t have to

configure them manually. You can apply the change by pressing the

RED button. A pop-up window displays the effective configuration of

the Ethernet interface when you press the RED button.

You can also get the pop-up window and check the current effective

configuration of the Ethernet interface with the GREEN button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

IP Address: If you select the “Disable” option in the “DHCP”, you have

to input the IP address manually. You can input the address with the

NUMERIC buttons and the LEFT/RIGHT buttons. You can move to

the next item of Subnet Mask with the DOWN button. You can

configure the following items in the same way; Subnet Mask, Gateway,

Primary DNS Server IP and Secondary DNS Server IP.

MAC Address: This will display the MAC address of the Ethernet

interface but you can not change it.

NOTE

You have to press the RED button to make your changes and

configurations for the network interface to take effect.

If you set the DHCP function to enable, the rest of the settings can

not be changed. However they still have the previous configuration to

help you set these easily set the DHCP function is enabled next time.

The effective configuration of the Ethernet is always displayed as a

pop-up window by pressing the GREEN button.

To use the DHCP function for the DP-S1, your router should support

the DHCP function. Please check the manual and the configuration of

your router.

You can apply the changes by pressing the RED button. A pop-up

window displays the effective configuration of the Ethernet interface

when you press the RED button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

2) W-LAN Setting

The other interface available for networking is the wireless LAN. You can

set and use this interface by setting the “Network Device” menu as “W-

LAN”.

Network Type: you have to specify the type of the device which the

DP-S1 communicates with. If you connect your DP-S1 with a router,

please set the “Network Type” as “Infrastructure”. If you connect your

DP-S1 with a PC, please set the “Network Type” as “Ad-hoc”.

Authentication Type: This is a more secure and safer connection

between the DP-S1 and the router as they authenticate each other

before communicating. Make sure it’s set the same as the

authentication type of the router.

Because the wireless LAN communicates through a radio channel, you

have to configure additional feature. The followings will explain these

features briefly. Please remember that the following features should be

the same as your router.

Encryption Type: If this option is set, the DP-S1 will communicate

with your router by encrypting the data. So, you can get a secure

communication channel. Please set this the same as the encryption

type of your router.

Key: Some authentication and encryption types require a key. Please

set the key same as your router.

The DP-S1 supports all security features which are most commonly

supported in wireless routers to ensure the compatibility with wireless

routers. You can set this configuration on the setup menu. Before you

set this, be sure that you configure your wireless router.

The user also set the IP information for the wireless LAN interface. As

can Ethernet device, you can select how you configure the IP

information: automatic configuration from DHCP server or manual

configuration. Please refer to the previous part of setting LAN interface.

Network Name (SSID): you have to specify which router or device

should be connected to your DP-S1. You can input the SSID of your

wireless router with the screen-keyboard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

3-2. Ice Guide

The DP-S1 supports iceTV service through the Internet. If you have an

Owner ID: if you press the OK button, on-screen keyboard will

displayed and you can enter your ID of iceTV account.

Password: if you press the OK button, the on-screen keyboard will

displayed and you can enter your password.

iceTV account, please set your account to utilize the service on your DP-

S1.

Check User Info: you can check if your account information is valid or

not.

NOTE

For more information about iceTV, please visit www.icetv.com.au, or

refer to Chapter 5. STB & PVR Function and find out how you can

utilize the 7-day EPG (Electronic Program Guide) using the iceTV

service.

Most broadcasters don’t provide a seven day guide. Therefore we

recommend you use IceTV guide if you wish to have a weekly guide.

Ice Guide: you can setup the way you get the EPG information; if you

select “Enable” for this option, the DP-S1 gets and updates EPG with

information from iceTV service. If you select “Disable” option, the DP-

S1 will update the EPG with the information from the broadcasting

station only.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

5. STB & PVR Function

The DP-S1 supports various ways of enjoying multimedia contents and

it groups its features in three parts; the first group is STB (Set-top Box)

and PVR (Personal Video Recorder) functions, the second group is file

playback functions including playback of recorded programs with PVR

function and DVD playback, and the last group is Internet services

which will be updated later.

2) Change Service with Service List

The service list contains all the broadcasting services you can receive.

You can get the service list as a pop-up menu by pressing the LIST

button and select a service with the UP/DOWN buttons.

This chapter describes the functions of STB and PVR. You can access

this operating with the LIVE button on the remote control in any

operating mode.

1. Basic STB Function

1-1. Service Change

1) Change between TV and Radio Services

Only the TV services will be listed under the TV service mode and only

the radio services will be listed under the radio service mode. You can

check the operating mode from the message placed on the top of the

service list: “TV service” or “Radio Service”. The LEFT and RIGHT

buttons work as page-up and page-down respectively. If you want to

hide the service list menu, press the EXIT button.

You can watch TV services or listen to radio services with the DP-S1.

The TV/RADIO button changes the operation mode. When you are

listening to a radio service, the TV screen displays nothing but a still

image.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

You can also edit the service list in the list view. This will be explained in

the later section.

NOTE

If you change a service continuously with the CH+ or CH- button,

only the information box will be changed according to your command:

You can watch the changed service 3 seconds after you press the last

button.

NOTE

You can hide the help message and extend the service list with the

RED button. If you want to display the help message, please press

the RED button again.

To record two programs simultaneously, two tuners are allocated for

the recording. Therefore, you can only change to a limited number of

services while the two programs are being recorded.

When selecting channels using the numeric buttons. Make sure you

know the channel number you wish to select as all channels fall on a

different number in each state. Eg: channel 10 isn’t always on

number 10 in the digital network.

3) Other Ways to Change Service

As in conventional TV sets, you can change a service which you want to

watch or listen to in the following ways;

Service Change with the CH+/CH- buttons: As you press the CH+ or

CH- button, the next or previous service will be selected.

Service Change with Numeric Buttons: You can change to a certain

service directly with numeric buttons. For example, if you press 1, 4,

and 6 buttons consecutively and then the OK button, service 146 will

be displayed on the screen.

Recall the Previously Viewed Service: the RECALL button returns to

the previously viewed service.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

1-2. Information Box

You can check the information of a service and the program using three

information boxes; the information box contains specific information of

a current service and program. The extended information box contains

more details about the current program. And the recording information

box shows the recording status. You can check these by pressing the

INFO button and cancel it by pressing the EXIT button. The followings

screen shot shows what the information box looks like.

Additional Service Icon Recording & Time-shifting Information

1. Service number

12. Subtitle support

2. Service name

13. Multiple audio language or

audio format support

3. Channel number

4. Channel frequency

5. Current program duration

6. Current program name

7. Next program duration

8. Next program name

9. Censorship support

10. Locked Service

14. Teletext support

15. Dolby audio support

16. One program is recording.

17. Two programs are recording.

18. Current service is recording.

19. Watching time-shifted position.

20. Signal quality

11. Pay service

21. Current time

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

1-3. Volume Level Adjust

1-4. Soundtrack Change

With the VOL+/VOL- buttons, you can adjust the volume level of the

analog audio output. The MUTE button will turn off the analog and

digital audio outputs.

If the current TV program provides more than one language or audio

format, i.e. MPEG audio and Dolby audio, together, you can select one

and change to that setting while you are watching a TV program.

Pressing the SOUNDTRACK button on the remote control will pop up a

list box contains the languages and audio formats you can choose.

Please select an item with the UP/DOWN buttons and press the OK

button to change it. You can cancel and hide the pop-up list by pressing

the EXIT button.

NOTE

You can not control the volume level of the digital audio outputs if you

set the audio format as “pass-through”. Therefore you have to use

the remote control of an audio decoder (such as an amplifier) to

adjust the volume level if you are using digital audio out.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

1-5. Subtitle and Teletext Service

1) Subtitle Service

2) Teletext Service

If you want to view subtitles on the screen, please press the SUBTITLE

button. To display the subtitle, please select “Enable” and press the OK

button. You can hide the subtitle by selecting “Disable” with the OK

button. You can also change the subtitle language if the program

provides more than one subtitle language. Please select a language with

the UP/DOWN buttons and press the OK button.

The teletext is a free service broadcasted by TV stations which gives the

latest information on news, weather, television programs, share prices

and many other topics. As the teletext service is optional, it does not

mean that all TV programs include teletext information. The DP-S1

support teletext service by emulating a teletext interpreter. The

TELETEXT button displays the teletext pages. You can get more

information from the teletext service with the RED

GREEN, YELLOW,

BLUE and NUMERIC buttons.

NOTE

The subtitle function will not work if the service provider does not

provide a subtitle service.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

1-6. Sleep Timer

You can set the DP-S1 to turn off automatically at a specific time. Press

the SLEEP button to set the timer. The DP-S1 will only turn off after a

recording has finished even if you set it to turn off before the

completion of the current recording(s). To cancel the timer, please press

the SLEEP button successively until you set time as “0 min”.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

2. Service Edit

2-1. Service List Edit

You can edit the service list if you want. The followings illustrate the

editing functions you can use to edit a service list.

Delete: You can delete the marked service from the service list. Press

the YELLOW button to delete. You have to re-scan if you want to

watch the deleted service(s) again.

2-2. Favorite Group

Favorite group is your personal collection of TV or radio services. You

can organize up to 20 groups including three default groups.

1) Favorite Group Edit

Before you use the favorite service groups, you have to organize them.

Please refer to Chapter 8. and organize your own favorite group(s).

Lock/Unlock: For your privacy, you can protect certain service from

unauthorized access. If you lock a marked service with the GREEN

button, you have to enter the 4-digit PIN code to watch the service.

The LOCK icon implies that the marked service is locked. To unlock a

service, you have to enter a 4-digit PIN code after pressing the

GREEN button.

2) Select Service on Favorite Group

Once you organize favorite groups, you can change the services that

belong to a certain favorite group. You can display the list of favorite

groups with the FAV button. As you see in the picture, the left column

contains your favorite groups and the right column displays the services

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3) Add Current Service to Favorite Group

belong to the favorite group. Please select a favorite group in the left

column with the UP/DOWN buttons and press the OK button. Then the

cursor moves to the right column. On the right column, the services

belong to the favorite group that was selected on the left column will be

displayed. You can select a service with the UP/DOWN buttons. If you

want to change to a certain service, please press the OK button on that

highlighted service.

You can add the service you are watching to a favorite group. Please

display the favorite list with the FAV button and select a group where

you want to add the current service. Please press the YELLOW button

to add.

NOTE

You can also use the LEFT/RIGHT buttons to move to the “Favorite

Group” column or “Favorite Service” column.

You can exit from the favorite group with the EXIT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

4) Service Change on Favorite Group

If you change services using the service list when you select a favorite

group, the service list will show the services belong to that favorite

group. You can change among these services on the list.

If you want to exit from a favorite group and list up all services

available in the service list, please press the BLUE button when the

service list is displayed.

You can also exit from the favorite list by pressing the RED button when

the favorite list is displayed.

If you change services with the CH+/CH- buttons, it also changes

among the services that belong to the favorite group you selected. The

information box will indicated which favorite group is selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3. PVR Functions

The major functions of PVR are time-shifting and recording. If you want

to play a recorded program, please use the multimedia contents

playback function with the FILE PLAY button on the remote control.

Chapter 6. File Playback Function will illustrate how you can play the

recorded program and edit it.

STOP button will skip and jump to the live position when you watch

the picture at time-shifted position.

PAUSE button will hold the picture until you select play again with

the PLAY button.

3-1. Time-shifting

You can pause and resume live TV program, and even rewind and replay

it. The time-shifting function is enabled all the time unless you disable it

in the Setup menu. The DP-S1 keeps 2-hour recording buffer of TV

program by utilizing the HDD storage. The buffer will reset if you

change to another service.

The time-shifting bar appears when you press the PAUSE or REW

button. The trick-mode operations such as rewinding, fast-forwarding,

pause and resuming are provided. If you want to jump to live from a

specific shifted position, please press the STOP button.

SLOW FWD button will play the recording in slower speed. The speed

will change to x1/2, x1/4, x1/8, x1/16 and x1/32 speed according to

each press of the SLOW FWD button.

PLAY button will display a time-bar. And it changes to normal

playback mode while other trick mode is enabled such as PAUSE, FF

or REW.

REW button rewinds backward with x2, x4, x8, x16 and x32 speed.

FF button plays forward with x2, x4, x6, x8, x16 and x32 speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

LEFT button skips and moves backward 15 seconds at a time. You

can also jump to a certain position with the LEFT button. The anchor

mark moves backward while you are holding down the LEFT button.

You can play and watch from the anchored position by releasing the

LEFT button.

NOTE

If two services are being recorded simultaneously and you are

watching a third service, the time-shift function for the third program

will be disabled automatically.

The time-shift buffer will be initialized if you change to other services

or go to File Play, wizTV or Setup mode.

RIGHT button skips and moves forward 15 seconds at a time. You

can also jump to a certain position with the RIGHT button. The

anchor mark moves forward while you are holding down the RIGHT

button. You can watch from the anchored position by releasing the

RIGHT button.

If there is less than 10 seconds of history in the time-shifting buffer

after initialization, the trick-mode operation can not work.

If the time-offset is less than 10 seconds from the live, the time-

shifting function may not work properly and play the live on the

screen.

UP button skips and moves forward 10%.

DOWN button skips and moves backward 10%.

Insertion of bookmarkers and playback with bookmarkers or instant

replaying is also possible in the time-shifting operation. Please refer

to Chapter 6. Multimedia Contents Playback for more instructions.

The time-shift function is not supported for radio service.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3-2. Instant Recording

Starting Point: You can select the starting point of recording with the

LEFT/RIGHT buttons when the time-shift function is enabled. If the

time-shift function is disabled, you can only record from the current

time.

1) Start Recording

You can record the current service and store it in the HDD instantly by

pressing the REC button. The following picture shows options you can

choose when you record a program.

1. Live: Start recording from the time when you press the REC

button.

2. Current Program: Record only the current program even if there

is a previous program stored in the time-shift buffer.

3. All: Record all the programs in the time-shift buffer.

File Lock: You can lock the recording file if you want. The LEFT/

RIGHT buttons will change this option.

File Name: The recording will be stored on the HDD as a file with the

name of the current program but you can change the file name if you

want. If you press the OK button, an on-screen keyboard will pop up

and you can enter a new file name.

After setting all options, please press the REC button on the remote

control or choose “Accept” button on the screen to start recording. If

you want to cancel the recording, press the EXIT button on the remote

control or “Cancel” button on the screen.

Duration: You can change the duration of recording with the LEFT

and RIGHT buttons. The default is 120 minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

NOTE

2) Trick Mode Operation

If you disable the time-shifting function, you can’t record a program

If you are watching a program while it is being recorded, you can

perform the same trick mode operations, which are explained in the

previous section of the time-shifting operation, even though you are

recording two programs simultaneously. For more information of trick-

mode operating, please refer to the previous section.

from the time-shifting buffer. Therefore you can only choose a single

option of “1. Live” when you intend to record a program.

If there is only one program in the time-shift buffer. The two options

of “2. Current Program” and “3. All” have the same meaning.

Therefore option “2. Current Program” does not appear.

You can record a radio program using the same procedure.

If two programs are being recorded, you can’t record another

program. In this case, a warning message will pop up.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3) Pause/Resume and Stop Recording

4) Change Recording Options while Recording

If you want to skip recording for a certain period of time, i.e.,

commercial advertisements, please press the REC button while you are

watching the recording service.

You can change the duration of a recording or file name after the

recording has started. You can also lock or unlock the recording file

while you are recording the service. Press the POP-UP button and

select “Recording Information” with the OK button.

Once a pop-up page appears, please press the PAUSE button. You can

resume recording with the PLAY button. You can simply toggle the

recording state of pausing and resuming with the OK button.

To stop a recording before it stops automatically after the duration,

please press the STOP button when the recording control pop-up is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

Please select a recording item with the UP/DOWN buttons to change.

If there is one recording, only one item will be displayed.

You can change the duration with the LEFT or RIGHT button.

You can change the file name with the RED button. An on-screen

keyboard will be displayed to edit the file name.

You can change the locking status of the recording file with the

GREEN button.

NOTE

You can stop the recording with the STOP button.

You can change to the recording service with the OK button,

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3-3. Timer

You can set programs which you would like to record to HDD. The timer

function can also be used to turn on the DP-S1 and watch the set

program or transmit the picture to an external recording device such as

a VCR (Video Cassette Recorder) according to your timer reservations.

You can set up to a maximum 200 timers.

1) View Timer List

You can view and check all of the timer information; modifying or delete

a timer and add a new timer to the timer list. Please choose “Timer List”

in the pop-up menu which you can access with the POP-UP button.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

2) Add New Timer

To add a timer, please press the RED button to display a menu on the

screen. A new pop-up window will appear to configure the timer.

You can configure the following items with your preference for a new

time record.

Date: Set start date of recording. Move cursor with the LEFT/RIGHT

buttons and change date with the NUMERIC buttons.

Start Time: Set start time. Move cursor with the LEFT/RIGHT

buttons and change time with the NUMERIC buttons.

Duration: Set duration of the recording with the LEFT/RIGHT

buttons.

Recurrence: You may set a series of timers by choosing Recurrence

option. You can choose the following options with the LEFT/RIGHT

buttons as your preference; Once, Daily, Weekend, Weekday, and

Weekly.

Mode: If you would like to watch a certain program or transfer it to an

external recorder instead of recording it to HDD, please choose “View”

option with the LEFT/RIGHT buttons. If you want to record a

program, please select “Record” option.

File Name: You can change the file name of the record. The OK

button displays an onscreen keyboard to change the file name.

File Lock: You can lock the recording file. Set this option with the

LEFT/RIGHT buttons.

Service: You can select a service to record. The default service is the

current service that you are watching. If you want to change it,

please press the OK button: a list of services will be displayed and

you can select a service with the UP/DOWN buttons then press the

OK button. If you want to record a radio service, press the

TV/RARIO button to change the list to the radio services.

Finally, you can save and finish a timer by selecting “Accept” on the

screen. If you want to cancel the timer and exit, please select “Cancel”

or press the EXIT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3) Edit Timer

4) Delete Timer

You can modify a timer setting such as service, start date, start time,

duration, recurrence and mode. Please choose a timer with the

UP/DOWN buttons on the timer list and press the OK button to change.

You can modify a setting the same way as described in the previous

section of adding a new timer. Select “Accept” with the OK button to

change the setting. Choose “Cancel” with OK button or press the EXIT

button to cancel the modification and exit.

Select a timer which you want to delete with the UP/DOWN buttons

and press the GREEN button. A pop-up confirmation will appear and

choose “Yes” with the OK button. If you do not want to delete a timer,

choose “No” with the OK button or press EXIT.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

5) Turn On and Off the DP-S1 according to Timer

If a timer starts when the DP-S1 is in standby mode, the DP-S1 is

turned on automatically and performs its operation according to the

timer. Once the timer is ended, a pop-up message will appear to ask if

you are operating the DP-S1 or not. If there is no confirmation to turn

off, the DP-S1 will be turned off and go into standby mode. If you want

to use the DP-S1 continuously, select “No” on the screen and press the

OK button. You can also cancel it by pressing the EXIT button. If you

are watching a program and a timer recording has started you can not

put the DP-SI into standby until the recording has finished or is stopped

by the user.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

3-4. Duplicated Recording

The DP-S1 can record up to two programs simultaneously. If you intend

to record more than two programs simultaneously, a pop-up warning of

duplication will be displayed.

1) Duplication When New Recording Starts

If a new recording starts because of an instant recording or a timer

setting while the DP-S1 records two programs simultaneously, a

warning message will pop up of the duplication. In these cases, the

following pop-up will be displayed. There are two options you can

choose if duplication occurs: you can stop one of the current recordings

to let a new recording occur or a new timer start. Else you can cancel

the new recording or timer recording and let the current two recording

finish properly.

NOTE

The new recording has higher priority than the existing recordings.

Therefore, when a new recording starts it will stop one of the existing

recordings, which ends earlier respectively, if there are no

confirmation or cancellation within 10 seconds.

To stop one of the current recordings and start a new recording, choose

a recording to cancel with the UP/DOWN buttons and press the OK

button. If you don’t want to stop any recordings, press the EXIT and

cancel the new recording.

You may not notice the warning message so make sure you organize

the timer list properly specifically if you are recording a very

important program.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

2) Duplication When a New Timer Sets

As explained before, the DP-S1 can record two programs simultaneously.

Therefore you can not add a new timer to record three programs at the

same time. If this occurs, a pop-up list is displayed to show the list of

duplicated timers if a new timer is entered as a duplication.

In order to add a new timer when duplication occurs, please delete one

group of timers displayed in the duplication timer list. If you don’t want

to delete all of the previously set timers, please reorganize (delete

some of the previously set timers) the previous set timers and make

sure they don’t duplicate to a new timer. Press the EXIT button to

cancel adding a new timer and reorganize the timers in the timer list.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

4. EPG (Electronic Program Guide)

The EPG (Electronic Program Guide) is a time table of TV programs

which show upcoming programs on a network. The EPG information is

supplied by TV broadcasters as an optional service, therefore the DP-S1

can not provide a full EPG if some broadcasters do not provide this

information.

The DP-S1 supports a full 7-day EPG provided as a subscription from

IceTV. Please visit the IceTV website, www.icetv.com.au, to set your

trial account and refer to Chapter 8 to organize it on your DP-S1.

The DP-S1 supports two types of EPG interface which will be explained.

You can enter the EPG with the GUIDE button and change the EPG type

with the RED button. If you want to exit from the EPG, please press the

EXIT button.

The small screen displays the program you are watching before you

enter to the EPG. The screen will not change when you change the

service with the LEFT/RIGHT buttons in order to prevent from

refreshing the time-shifting buffer. You can check information of a

program on the message window when you place the cursor on the

program.

4-1. EPG with Single Service

This EPG shows only one service at a time. You can change to the

multiple-service EPG with the RED button. Programs are listed vertically

by time. Therefore you can move cursor to the previous or next

program with the UP/DOWN buttons. If you want to review another

service, press the LEFT/RIGHT buttons to change.

You can move the cursor with the GREEN

YELLOW and BLUE buttons

instead of pressing the UP or DOWN button continuously.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

4-2. EPG with Multiple Services

This EPG shows 4 services at a time. The vertical axis implies services

and the horizontal axis implies time. You can move the cursor and

explore the programs with the UP/DOWN/LEFT/RIGHT buttons; the

UP/DOWN buttons change service. Therefore the cursor will move

upward or downward according to the UP/DOWN buttons. The

LEFT/RIGHT buttons change time, and the cursor will move to left or

right accordingly.

The small screen displays the program you watched before you entered

the EPG. The screen will not change when you change the service or

program in order to prevent from refreshing the time-shifting buffer.

You can check the information of a program on the message window

when you place the cursor on the program.

You can move the cursor with the GREEN

YELLOW and BLUE buttons

instead of pressing the UP or DOWN button continuously.

Download from Www.Somanuals.com. All Manuals Search And Download.

STB & PVR Function

4-3. Service Change and Recording

1) Service Change

3) Resolving Duplication

If you want to change and watch a certain program, place the cursor on

the program you want to watch and press the OK button. This action

automatically exits from the EPG then you will watch the program on

the full screen.

If a new recording or timer setting produces a duplication to the current

recordings or the timers previously set, a pop-up windows will be

displayed, which is explained in the previous section. You can either

cancel the current recording/previous set timer, or you can cancel the

new recording/timer.

2) Recording

You can record or set a timer in the EPG with the REC button. If the

cursor is place on the current program, the REC button enables instant

recording. Also if the cursor is placed on the future program, the REC

button sets a timer. Especially for future programs, you can set a timer

to either record or just view with consecutive inputs of the REC button.

You can not set the recurrence of recording in the EPG.

NOTE

You can not watch a program if it is already finished or scheduled to

show in the future.

If it’s necessary to change the program displayed on the small

window according to the instant recording, a pop-up message

appears for you to confirmation.

If you set a recording or a timer for viewing, a red or blue dot is marked

on the program accordingly.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

6. File Playback Function

This chapter covers all functions regarding playing multimedia contents.

The DP-S1 can play movie, music and photo files stored in the internal

hard disk drive, PCs on the home network, optical disk such as DVD or

CD, USB storage devices, and memory cards. You can also play the

recording contents in this mode. You can enter this operation mode with

the FILE PALY button.

1. Exploring Contents

To provide a user-friendly interface, the main menu is structured in

three parts; the first part is a top (horizontal) menu where you can

select a type of contents to play. The second part is a left (vertical)

menu where you can select a storage or device where the contents are

stored. The last part is a file list where you can view and select files and

folders.

The following picture shows the main menu and illustrates the structure.

A step-by-step explanation will be provided to help you understand its

operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

1) Step 1: Select Content Type

With the LEFT/RIGHT buttons, you can select a content type you want

to play. If you select “Movie” icon on the top menu, only the movie files

will be displayed on the screen even though a folder or device contains

other type of contents such as music or photo. You can also choose

“Music” or “Photo” icon with the LEFT/RIGHT buttons.

2) Step 2: Select Storage

With the UP/DOWN buttons, you can select a device to access. As you

select a device, folders and files stored in that device will be listed on

the screen. There are five icons on the left menu and each icon has the

following meanings:

ODD: If you insert a DVD title in the tray, the DP-S1 will play the

contents automatically. If you insert other multimedia CD or DVD, you

have to select the file you want to play. The folders and files will be

listed on the screen if you select “ODD” icon.

HDD: You can access the internal hard disk drive by choosing “HDD”

icon. The recorded programs of TV and Radio will be stored in the

“Recording” folder.

USB: You can access any USB devices connected to the DP-S1 by

selecting “USB” icon on the left menu. If there is more than one USB

devices, all the devices will be listed on the screen.

Network: A list of PCs or network devices connected to your home

network will be listed if you select this icon. Press the RED button to

scan and update PCs connected to your home network. Please be

sure that the device has at least one shared folder to access and

share contents.

Memory Card: If you insert a memory card to the DP-S1, you can

access to it with this icon.

The top icon on the left menu implies a play-list where you can put files

temporarily as your preference. You can organize one play list per each

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

content type; movie, music and photo. This will be explained in greater

detail in the following section.

from it. However you can not change a device on the left menu with

the UP/DOWN buttons unless you exit.

The USB device must be compatible with the USB 2.0 standard.

If there is no device listed on the screen after scanning, please check

the network connection and make sure its set and configured properly.

You can scan a specific network device with its IP address. Please

press the GREEN button and enter the IP address of the device.

3) Step 3: Exploring Folders and Files

Once you select a content type, i.e., “Movie” and storage or device, i.e.,

“Network”, press the OK button to enter the list of folders and/or files

(the file list). In the file list, the UP/DOWN buttons move the cursor

upward or downward to select a folder or file. Please remember that the

UP/DOWN buttons do not change your selection of the storage type,

i.e., “HDD” on the left menu in this operation mode. If you want to

change the storage type, you have to exit from the file list with the

EXIT button.

You can play content with the OK or PLAY button. More information of

playback by content types will be supplied later.

NOTE

There are two operation modes for exploring contents; in the first

operation mode, you can select an icon (content type) on the top

menu with the LEFT/RIGHT buttons and an icon (device) on the left

menu with the UP/DOWN buttons. The second operation mode you

can enter with the OK button is selecting a folder or file.

WARNING

Each USB port can supply maximum of 500mA to the external device.

Connecting devices consuming more than 500mA can damage the

DP-S1 if there is no additional power supplier to the USB device.

You can change the content type while you are exploring folders and

files in a list of files with the LEFT/RIGHT buttons without exiting

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

2. Contents Playback

2-1. Movie Playback

NOTE

It takes a few minutes to start playing depending on the content

To play a movie, please select the “Movie” icon on the top menu and

select what you want to play on the file list; as explained in the

previous section, select a device or storage on the left menu with the

OK button to enter the file list. You can choose a file or folder with the

UP/DOWN buttons on the file list. Once you choose a file, please press

the PLAY or OK button to play the file.

format.

If you want to play the previous or next file as you are watching a

movie, please press the PREV or NEXT button.

A certain movie content could not play as it depends on the content

format.

If you are recording a service, the playback of high-definition movie

content can be limited.

The DP-S1 plays the successive file in the same folder after playing a

file unless you press the STOP button.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

1) Trick Mode

Powerful trick-operation is supported while you watching a movie.

PLAY button will display a time-bar. It changes to the normal

playback mode while other trick mode is enabled such as PAUSE, FF

or REW.

PAUSE button will hold the picture until you play again with the

PLAY button.

SLOW FWD button will play in slower speed than the normal speed.

The speed will change to x1/2, x1/4, x1/8, x1/16 and x1/32 speed

according to each input of the SLOW FWD button.

REW button rewinds backward with x2, x4, x8, x16 and x32 speed.

FF button plays forward with x2, x4, x8, x16 and x32 speed.

LEFT button skips and moves backward in 15 seconds. You can also

jump to a certain position with the LEFT button. The anchor mark

moves backward while you are pressing the LEFT button. You can

play and watch from the anchored position by releasing the LEFT

button.

NOTE

The trick mode operation can not always be supported as it depends

on the content format.

RIGHT button skips and moves forward 15 seconds. You can also

jump to a certain position with the RIGHT button. The anchor mark

moves forward while you are pressing the RIGHT button. You can

watch from the anchored position by releasing the RIGHT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

2) Subtitle

The DP-S1 can decode and display subtitles from a subtitle file. To play

a movie with subtitle, please copy the subtitle file to the same folder of

the movie file and give the same file name as the movie file. The DP-S1

automatically display subtitle when you play a movie with the OK or

PLAY button.

You can adjust the position of the subtitle with the UP/DOWN buttons

while the subtitle control window is displayed. If the subtitle is out of

sync, you can adjust the sync with the LEFT/RIGHT buttons.

NOTICE

The DP-S1 support the following subtitle formats; smi, sub and srt.

You can hide the subtitle if you do not want to display. Please press the

SUBTITLE button and press the OK button. You can also display the

subtitle in the same manner.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

2-2. Music Playback

You can play music the same way you play a playing movie; please

select the “Music” icon on the top menu to play music. You can utilize

the same trick operation for playing music which is described in the

previous section for playing a movie.

You can play the previous or next file with the PREV or NEXT button.

NOTE

The DP-S1 plays all music files in a folder repeatedly unless you press

the STOP button.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

2-3. Photo Playback

To play photo files, please select the “Photo” icon on the top menu.

NOTE

The DP-S1 plays all photo files in a folder continuously unless you

press the STOP button under the auto-slideshow mode.

Once the DP-S1 play a photo file, it will play all photos in the folder

successively. You can play the previous or next photo manually with the

PREV or NEXT button.

If you press the INFO button, a help message will display. You can stop

the auto-slide show with the PAUSE button and resume with the PLAY

button. You can change the slide with the PREV or NEXT button in the

manual mode. You can also hide the help message with the INFO

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

2-4. Play-list

NOTE

The play-list is a personal collection of multimedia contents, which

stores the list of files temporarily. You can organize a separate play-list

for each media content type: movie, music and photo.

If you can not put a folder on the play-list. You have to select all files

of a folder and put them to the play-list.

1) Add File to Play-list

2) View Files in Play-list

You can organize a play-list and enjoy the contents. Please place the

cursor on a file you want to put to the play-list and press the YELLOW

button: the file will be listed on the play-list. If you want to put more

than one file to a play-list at once, choose files with the BLUE button

one by one and press the YELLOW button. “Check” icon indicates that

the file is selected.

You can check files in the play-list by selecting the “PLAY-LIST” icon on

the left menu with the OK button. Files in the play-list will be listed on

the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Playback Function

2-5. DVD Playback

3) Play from play-list

You can play files in the play-list by pressing the OK or PLAY button. If

you change to the previous or next file in the play-list, press the PREV

or NEXT button.

If you select the “ODD” icon on the left menu while a DVD title is loaded

on the tray, the DP-S1 will display a confirmation pop-up to play the

title. Please press the OK button to play the DVD title.

4) Remove File from Play-list

You can remove a file from the play-list with the YELLOW button the

same way as adding a file to a play-list. Select the “PLAY-LIST” icon on

the left menu and choose a file which you want to remove from the

play-list. You can also use the BLUE button to remove more than one

file at once.

Download from Www.Somanuals.com. All Manuals Search And Download.

Internet Services

7. Internet Services

The DP-S1 is designed to support various Internet services, however

this will be updated at a later time. You can get the latest information

for the DP-SI by visiting the website, www.beyonwiz.com.au.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

8. Advanced Setup

As an extension to Chapter 4. Quick Setup, this chapter illustrates how

to configure your DP-S1. The MISCLLANEOUS and MANAGEMENT parts

will be explained. In this chapter as they were the remaining two items

that were not explained previously.

1. Miscellaneous

The setup menu is grouped in four parts: CONFIGURATION, NETWORK,

MISCELLANEOUS and MANAGEMENT. The first two groups are explained

in Chapter 4. In this chapter the last two parts will be illustrated.

As explained before, press the SET-UP button to enter the setup menu.

As you select MISCELLANEOUS icon on the top menu, three items of

Favorite, Access Control and Preference will be listed on the left menu

bar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

1-1. Favorite

Before using the favorite service groups, you have to organize them.

The edit page consists of three columns: Group, Fav. Service and All

Service. Once you enter into the list with the OK button, you can place

the cursor on one of the three columns with the LEFT and RIGHT

buttons.

A favorite group can not contain TV services and radio services together.

Therefore, you have to specify as TV or radio group when you make a

new group. TV and RADIO icons indicate the property of each group.

Add Group: You can add a new group with the RED button. If you

press the RED button when the cursor is place on the “Group” column,

a screen-keyboard pops up and you can input the group name.

Rename: To change the name of the existing group, press the GREEN

button after placing the cursor on the group. a screen-keyboard pops

up and you can modify the name.

1) Group

The first column contains the list of your favorite groups. You can

organize up to 20 favorite groups.

Remove: Press the YELLOW button to delete a group. If you press

the YELLOW button, a confirmation pop-up screen will display to get

your confirmation to delete. If you do not want to delete a group,

press the EXIT button.

Move: You can organize the order of the favorite groups with the

BLUE button.

NOTE

A favorite group can contain only one type of services; TV or radio.

When you add the first service to a new favorite group, the favorite

group becomes a TV group or radio group depending on the first

service type.

You can also add a new group, and delete or rename an existing group.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

2) Favorite Service

3) All Service

According to your selection of the favorite group in the first column, the

services belonging to the favorite group will be displayed on the second

column. You can remove a service from the favorite group with the OK

button.

The third column shows all services which you can access. This list

shows all the service of TV or radio. With the TV/RADIO button, you

can change this list to TV service list or radio service list. If you want to

add a service to a certain favorite group, select a favorite group in the

first column and select a service in the third column with the OK button.

You can check if the service is added successfully on the second column.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

1-2. Access Control

2) Access Control

You can set a PIN number to access certain set-up menus. After setting

a PIN number, you have to re-enter the PIN number to enter the menu

again.

You can lock the following setup menus.

1) Set PIN Number

You can set 4-digit PIN number with the NUMERIC buttons. For safety,

you have to enter the number twice to set a new PIN number.

Censorship: If you set this, you have to enter the PIN number when

you watch a program with higher censorship level.

Start-up: If you set this, you have to enter the PIN number when you

turn on the DP-S1.

Setup Menu: If you set this, you have to enter the PIN number when

you access to Setup menu.

NOTE

The default PIN number is 0000.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

Time Setting Menu: If you set this, you have to enter the PIN number

when you change the time and date setting.

Network Configuration Menu: If you set this, you have to enter the

PIN number when you change the network configuration.

Service Scan Menu: If you set this, you have to enter the PIN number

to scan service.

Factory Setting Menu: If you set this, you have to enter the PIN

number to set your DP-S1 as factory-default setting.

To change the configuration, press the OK button to get a pop-up menu

to change the configuration. Please select with the UP/DOWN buttons

and press the OK button to select. If you do not want to change, press

the EXIT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

1-3. Preference

1) Time-shifting

If you don’t want to use the time-shifting function, you can disable it.

Please select “Time-shifting” and press the OK button. You can select

“Disable” on the pop-up menu screen. The default configuration is

“Enable”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

2. Management

You can upgrade or initialize your DP-S1 in this menu.

2) Firmware Upgrade

You can upgrade your DP-S1 with the latest firmware. Please visit the

website, www.beyonwiz.com.au, for firmware information. If you wish

to upgrade please download the latest firmware.

2-1. F/W Upgrade

1) Firmware Information

Before upgrading the firmware, you can check the information and last

update. Press the OK button to get the information: System Identity,

Firmware Version and Last Update. You can exit with the EXIT button.

The DP-S1 can upgrade firmware which is stored on a USB device, CD

or PC in a network. Please select the firmware upgrade on the file list

and press the OK button to start. It takes several minutes to complete

upgrading. Please make sure that your DP-S1 is NOT turned OFF until it

finishes upgrading.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

After the DP-S1 upgrades the firmware, it will restart automatically. You

may check the status on the screen and front display window.

NOTE

If you cannot visually see the firmware upgrading from your PC or

device, please check the network configuration of your PC and DP-S1.

While the DP-S1 is upgrading the firmware, it should NOT be turned

off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

2-2. HDD

1) HDD Information

2) HDD Format

If you select this menu with the OK button, a pop-up window will

display a summary of the internal HDD. You can also check the usage of

the HDD. To close the pop-up window, press the EXIT button.

You can delete all files on the HDD. If you select this menu with OK

button, a confirmation pop-up displays. If you select “OK” on the screen

and press the OK button, the DP-S1 will restart and format the HDD

automatically. If you do not want to format the HDD, please select “No”

on the screen and press the OK button, or press the EXIT button.

NOTICE

You have to wait until the DP-S1 formats the HDD successfully, it

takes several minutes. The front display shows the status. Do NOT

TURN OFF the unit until this function has finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Setup

2-3. Initialize

1) Clear Service Information

2) Factory Setting

You can clear all the service information. If you select this with the OK

button, a pop-up window will be displayed to get your confirmation. If

you select “YES” all services will be deleted and you will have to rescan

them again. Otherwise select “NO” or press the EXIT button to return to

the initialize menu.

If factory setting is selected, the DP-S1 will erase all information and

reset itself to the factory configuration. If you select this with the OK

button, a pop-up window will display to get your confirmation. If you

select “YES” the DP-S1 will reset all data to the factory configuration.

Otherwise select “NO” or press the EXIT button to return back to the

initialize screen.

NOTE: After a factory setting all services must be retuned before

viewing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Remote Control

9. Set Remote Control

2. Manual Set

You can set your remote control with 3-digit code manually. Please look

at the following table and find the brand of your TV.

The remote with the DP-SI can control other brands. If you wish to

control your TV, please press the TV button. After this, the red-

backlight of the TV button will flash when you press the buttons to

indicate that the remote control works for your TV.

Turn on your TV then press and hold the TV button until the red-

backlight turns on. Please point the remote control at your TV and enter

the 3-digit code with the NUMERIC buttons. Wait until the red-

backlight blanks three times. If your TV turns off automatically, your

remote control is ready to use for your TV. If your TV does not turns off,

press the TV button and enter another code from the table under that

brand.

There are two ways to program the remote control to work with your TV,

automatic code search or manual set.

1. Automatic Code Search

Please turn on your TV then press and hold the TV button until the red-

backlight turns on. Please point the remote control at your TV and click

the UP button. After the red-backlight of the TV button blinks, please

wait at least 3 seconds to check your TV turns off or not. If your TV

turns off automatically, your remote control is ready to use for your TV.

If your TV does not turns off, please repeat clicking the UP button until

your TV turns off. Once your TV turns off after you click the UP button,

please press the OK button. The TV button blinks three times to

indicate that the remote control is set.

FUJITSU

208

261

410

206

229

240

287

301

309

317

382

406

223

286

422

207

231

244

292

304

3123

325

383

407

224

307

423

208

232

253

298

305

314

358

384

410

218

325

253

329

HITACHI

215

236

256

299

306

315

367

399

411

218

238

286

300

307

316

381

405

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Remote control

JVC

207

385

208

286

387

205

229

208

214

237

255

286

208

307

205

216

260

296

412

207

206

264

424

208

212

247

264

323

NOTE

If your TV brand is not listed on above, please visit the following

website to get the correct code if available: www.beyonwiz.com.au.

Your remote will not always be compatible with all branded televisions.

If this remote doesn’t work or no code exists, please obtain the

original remote from the manufacture of your TV.

215

307

410

207

248

210

216

239

258

307

244

374

206

218

270

325

224

344

412

208

253

211

220

242

260

309

246

376

208

224

277

337

229

374

253

385

NEC

215

286

212

230

244

278

384

286

380

209

229

286

374

224

389

213

236

245

279

410

287

410

215

253

287

410

PANASONIC

PIONEER

SAMSUNG

SHARP

SONY

209

207

272

426

258

230

208

285

430

286

245

225

286

384

230

329

THOMSON

345

405

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty Conditions

1. Where required by Beyonwiz only the original invoice/receipt issued by the dealer will be accepted as proof of purchase.

2. Beyonwiz may reject warranty claims on equipment which it believes to be illegally acquired or when the “owner” is unable to provide proof of purchase

or where security labels or serial numbers have been tampered with or removed.

3. The warranty covers only defects in the material and workmanship of the product for a period of 12months from the date of original purchase.

4. This warranty is on “Return to Base” basis. The owner is responsible for the delivery of the equipment to the point of purchase and for collecting the

repaired or replaced equipment from the same location.

5. The warranty is void if failures arise as a result of any of the following. i) Abuse, misuse, physical impact, normal wear and tear. ii) Alteration or repairs

carried out with out written authorization from Beyonwiz. iii) Upgrade that are not registered by Beyonwiz iv) Operating or maintained other than in

accordance with the manual supplied.

6. This equipment will not be considered defective as a result to incompatibility with other equipment or accessories other than the ones supplied with the

unit at the time of purchase.

7. This unit should be returned in its original carton and protective packaging or alternatively in a packing suitable to prevent damage. Beyonwiz will not

accept any responsibility for goods damaged whilst the goods are in transit.

8. Repair or replacement under the terms of this warranty does not give the right to extension or a beginning of a new warranty period. Repairs or

replacements may be carried out with functionally equivalent reconditioned parts or equivalent part. Parts that have been replaced become the property

of Beyonwiz.

9. The customer acknowledges that no promise representation or undertaking has been given by Beyonwiz or its dealer in relation to equipment other than

as contained in this warranty.

10. A service charge will apply if the fault is not covered within the conditions of this warranty or if there is no fault found. The charge will be based on the

current market rate.

11. Beyonwiz is not liable for any other loss other than the unit itself.

12. Nothing contained in this warranty shall be read or applied so as to affect the right of the consumer in relation to the provisions of the trade practices

act or other statutory rights provided by legislation of the state or territory. In the absence of applicable legislation this warranty will be purchases sole

and exclusive remedy and neither Beyonwiz nor its distributors or agents shall be liable for any incidental or consequential damages for breach of any

express or implied warranty of this equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Black Decker Cordless Sander 5106621 06 User Manual
Britax Car Seat Regent User Manual
Cannon Time Clock PIXMA MX340 User Manual
Canon Digital Camera VB C50FSi User Manual
Canon Projector 7365 User Manual
Canon Scanner 8800F User Manual
Carrier Refrigerator 30MPA User Manual
Carrier Thermostat TCSNAC01 User Manual
Cateye Bicycle Accessories CC ED300 User Manual
Chicago Electric Personal Lift 44006 User Manual