Network
USB Hub
Belkin B.V.
Belkin Tech Support
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
+31 (0) 20 654 7349 fax
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2007 Belkin International, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed. Windows
and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Mac
OS is a trademark of Apple Inc., registered in the U.S. and
other countries.
P75465-A
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1. Introduction .....................................................................1
2. Setting Up your Network USB Hub ..................................2
3. Using the Network USB Hub Control Center....................5
4. Appendix – Operation/Compatibility Notes....................17
5. Information....................................................................18
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations and thank you for purchasing the Network
USB Hub (the Hub) from Belkin. By connecting to your network
router, this innovative sharing tool gives you a great way
to enhance its capabilities, as well as those of all the USB
devices connected throughout your network. It lets you access
your USB devices remotely without the hassle of setting up
network software. Now you can easily print to the USB printer
in your home office from your living room or bedroom—through
any wireless router.
1
2
3
4
5
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your Network USB Hub
The Hub works with Windows® XP and Windows VistaTM
(32- and 64-bit), and Mac OS® X (v10.3~v10.4). In order to
use the Hub, you must have a networking router connecting
your network.
1
2
3
4
5
1. Preparing for Setup
NOTE: If you are connected to a network router that uses
Dynamic Host Configuration Protocol (DHCP), which most
networks do, you do not need to set up your Hub.
1.1 Plug the AC adapter into the Hub.
1.2 Check the Power LED (green). It should be illuminated.
1.3 Plug the Ethernet cable into the Hub.
1.4 Plug the other side of the Ethernet cable into your
network router.
2. Installing the Software
IMPOrTANT: If you do not install the software on your
computer, the Hub will not work.
2.1 Insert the setup CD into your CD-ROM drive.
You will see the Hub Setup CD icon.
Please open it and click “Setup” icon.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your Network USB Hub
2.2 You will see the Hub
Setup CD screen.
Click “Install Control
Center”.
1
2
3
4
5
2.3 You will see the
“Welcome” screen.
Click “Continue”.
2.4 Select a destination
in which to install the
software and click
“Continue”.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your Network USB Hub
2.5 Click “Install” to start the
installation.
1
2
3
4
5
2.6 If prompted please enter
name and password for
authentication.
2.7 Installation is complete.
Click “Restart”.
Warning: Please update your
firewall and Internet security
software to make sure your
computer works properly
with the Network USB Hub.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
Once the setup is completed, launch the Belkin Network
USB Hub Control Center through the “Start” menu. The main
Control Center (see image below) gives you a visual depiction
of your connection configuration.
1
2
3
4
5
You can connect to a device by Ctrl+Clicking the device on the
list, or by selecting it on the list, and then clicking “Connect”,
on the bottom of the screen. To disconnect a device, just
Ctrl+Click it on the list, or select it and then click “Disconnect”,
on the bottom of the screen.
You can change device names, settings, and more by selecting
the device from the list, and then clicking “Properties”.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
What the designations mean
1
2
3
4
5
Device: Name of the device. You can change the name by
clicking “Properties”.
Status: Status of the device. The status changes automatically.
Type: Category of the device. This is detected automatically.
Automatically connect: This allows the PC to automatically
connect to this device. This can be enabled or disabled
in “Properties”.
Hub ID: The ID of the Hub into which the device is plugged.
This is detected automatically.
Connected to this computer: Devices shown are currently
connected to the computer that you are using.
Not Connected: It is available for you to use. You can
connect to this device by double-clicking the bar or by
clicking “Connect”.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
1
2
3
4
5
Not Connected: The device is being used by someone else
and it is not available. You can make a request for the device
by clicking “Request Use”.
Unavailable: The device has been disconnected from the Hub.
It will be removed from the list when you click “Refresh”.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
requesting a device when it is being used by someone else
1
2
3
4
5
When someone else is connected to a device that you want to
use, you can make a device request. Ctrl+Click on the device
in the list and select “Request Use” from the pop-up menu,
or, you can select the device from the list and click
“Request Use”.
“Device Request” displays a message
on the other user’s computer screen
that looks like this:
The user of the other computer must
accept the request, by clicking “Yes”,
in order to make it available to you.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
When the other user clicks “Yes”, the device will be
disconnected automatically from that user’s computer and it
will be available for you to use.
1
2
3
4
5
Changing the connection settings
You can set the Control Center to automatically connect to
devices when the software launches. Selecting “Automatically
Connect” simplifies the overall experience for most users;
however, it may not be a suitable default setting if the devices
are shared among many users.
To change the connection setting, Ctrl+Click on the device
name in the list and click “Properties”; or select the device
from the list and click “Properties” on the bottom.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
1
2
3
4
5
Click on the “Connection” tab and check or uncheck the
box next to “Automatically connect this device when the
Control Center starts”, depending on whether or not you
want to automatically connect the device on start-up,
then click “Apply”.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
Sharing a USB printer
You can set the Network USB Hub Control Center to share
any USB printers on the network.
1
2
3
4
5
Note: You must install the printer driver on your computer
before enabling sharing.
Note: You must install the Network USB Hub Control Center
software on each computer that is going to access the printer.
1. Install the Network USB Hub and printer software, and
driver first.
2. Select the printer from the list and click “Connect”. It will
install the printer driver for the first time.
3. Repeat steps 1 and 2 on each computer that will share
the printer.
4. Select the printer and click
“Properties”. Click on the
“Connection” tab.
5. Select “This is a shared
printer, automatically
connect and disconnect
only when printing”.
6. Select the printer from the
printer list. It should match
the correct printer.
7. Click “Apply” to apply
the changes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
8. This setting has to be set on all the computers on the
network to enable the sharing feature correctly.
1
2
3
4
5
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
Changing the Network USB Hub Control Center settings
1
2
3
4
5
Click the “General” link, under “Common Tasks” on the left
of the “Control Center” screen to open the “Network USB
Hub settings” window.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
1
2
3
4
5
Simply check or uncheck the box to determine whether
you want to launch the Network USB Hub Control Center
when MAC OS starts.
Checking “Show the Hub Control Center” causes
the “Control Center” screen to display when you
launch the Control Center.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
Accessing the Network USB Hub hardware setting
1
2
3
4
5
Click the “Network USB Hubs” link, under “Common Tasks”,
on the left side of the “Control Center” screen to open the
“Network USB Hub settings” window.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Network USB Hub Control Center
1
2
3
4
5
Select and click the Network USB Hub from the list. Then
click “Properties”. Your web browser will launch and open
the web page built into the Network USB Hub.
From there, you can change the advanced network settings
and update the firmware for the Network USB Hub.
The password for the web page is blank or none by default.
resetting the Network USB Hub
You may need to reset the Network USB Hub to either reset
the unit or to restore the factory default settings.
The reset button is located on the back of the unit. If you
press and hold the button for 1 second, the unit will reset.
If you press and hold the button for 5 seconds, the unit will
reset and restore itself to the original factory settings.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix – Operation/Compatibility Notes
Certain USB devices may not be compatible with the Hub.
1
2
3
4
5
Since the Network USB Hub uses virtual network
technology, some USB devices (e.g., TV tuners, webcams,
and USB audio devices) are not compatible with it in Mac
OS. They will not appear on the Control Center even when
they are attached to the Network USB Hub.
WLAN connection
The Network USB Hub’s virtual network technology may not
work properly if the WLAN connection is interrupted. If you
have problems with the Network USB Hub or connected
USB devices, please make sure that your WLAN connection
is strong and stable.
The Network USB Hub can support up to 15 connections
Virtual network technology limits the number of devices the
Hub can support to 15 total connections.
(Important: One connection does not equal one device;
some devices involve more than one connection.
For instance, a multifunction printer is typically comprised
of four connections.)
The Network USB Hub and VPN
Since VPN filters the connection between the computer and
other network devices, the Hub may not work with VPN
enabled. If you experience difficulty with the Hub’s operation,
disable the VPN connection while using the Hub.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
FCC Statement
1
2
3
4
5
DECLArATION OF CONFOrMITY WITH FCC rULES FOr
ELECTrOMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA
90220, declare under our sole responsibility that the product:
F5L009
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
may only be operated indoors. Operation outdoors is in violation of 47
U.S.C. 301 and could subject the operator to serious legal penalties.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the
F5L009, to which this declaration relates, is in conformity with Generic Emissions
Standard EN55022:1998 Class B, EN50081-1, and with Generic Immunity
Standard EN50082-1:1992.
Belkin International, Inc., Limited Lifetime Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this
Belkin product that the product shall be free of defects in design, assembly,
material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for the lifetime of the product.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge
(except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to
Belkin for inspection upon Belkin’s request at the sole expense of the purchaser,
or if Belkin determines that the Belkin product has been improperly installed,
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
altered in any way, or tampered with. The Belkin Product Warranty does not
protect against acts of God such as flood, lightning, earthquake, war, vandalism,
theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse,
damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.
1
2
3
4
5
How to get service.
To get service for your Belkin product you must take the following steps:
1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA
90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the
Occurrence. Be prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how to
forward your receipt and Belkin product and how to proceed with your claim.
Belkin reserves the right to review the damaged Belkin product. All costs of
shipping the Belkin product to Belkin for inspection shall be borne solely by the
purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship
the damaged equipment to Belkin, Belkin may designate, in its sole discretion,
an equipment repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from such repair
facility and of such estimate shall be borne solely by the purchaser. Damaged
equipment must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be subrogated under
any existing insurance policies the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE
NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW,
IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH
IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF
THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT,
INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT
LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
1
2
3
4
5
This warranty gives you specific legal rights, and you may also have other rights,
which may vary from state to state. Some states do not allow the exclusion or
limitation of incidental, consequential, or other damages, so the above limitations
may not apply to you.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|