Belkin Switch P72115 User Manual

Front Photo:  
Front Title:  
Belkin Components  
OmniView PS/2 4-Port  
“P” Part Number:  
P72115  
--------------Next page------------  
Introduction:  
Thank you for purchasing Belkin Components’ OmniView PS/2 4-Port keyboard/video/mouse (KVM) switch!  
Now, you can control multiple computers from just one keyboard, mouse and monitor. No more messy  
server rooms, cluttered cables, or cramped cubicles. With the OmniView, you are in complete control!  
Compatible with both PS/2 and serial mice, and DIN5 or MiniDIN6 keyboard connectors, the OmniView is  
the ultimate in flexibility. Simply use standard keyboard, mouse, and VGA cables to interface to the  
computers. Belkin offers these cables in complete kits for even more convenience.  
With the OmniView, you can boot up each computer without encountering any keyboard or mouse errors.  
The intelligent circuitry emulates keyboard signals to prevent aborted boot sequences or lost mouse control,  
often found when using manual KVM switchboxes. Furthermore, the OmniView can be cascaded for even  
more control, up to 64 computers!  
Control, convenience, efficiency. All of which, come standard with the Belkin OmniView.  
Check the end of this booklet for more information on OmniView accessories!  
Features:  
Allows a user to control over as many as 64 computers from one keyboard, mouse and monitor  
Supports both PS/2 and serial mice simultaneously  
Supports both PS/2- and AT-style keyboards  
Supports VGA, SVGA and Multisync monitors  
Uses standard cables  
Pushbutton or keyboard hot-key sequence switching  
Auto scan mode and quick last/next switching modes for even more convenience  
Audible feedback when switching  
Recalls CAPS LOCK, NUM LOCK, and SCROLL LOCK keys’ status for each computer automatically  
Front-panel status LEDs  
Works with other OmniView accessories (MAC Adapter, FootSwitch and RackMount kit)  
No software required  
One year product warranty  
Package Contents:  
4-Port OmniView PS/2  
9VDC, 600mA power supply  
This manual  
F1D066  
F1D065-PWR  
P72115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation:  
1. Make sure you have the right cables!  
Before attempting to connect anything to the OmniView or the computers, make sure you have the  
appropriate cables and adapters (if necessary):  
PS/2 mouse or PS/2 keyboard cable  
Mini-DIN-6 male to male  
Part # F2N036-xx  
Serial mouse cable  
DB-9 male to female, with thumbscrews  
Part # F2N209-xx-T  
AT keyboard cable  
DIN-5 male to male  
Part # F3A510-xx  
Standard VGA cable  
HD-DB-15 male to female, with thumbscrews  
Part # F2N025-xx-T  
High-resolution / long distance VGA cable  
Double-shielded, coaxial; HD-DB-15 male to female, with  
thumbscrews  
Part # A3H981-xx-T  
AT to PS/2 keyboard adapter  
DIN-5 female to Mini-DIN-6 male  
Part # F2N017, F2N017-xx  
PS/2 to AT keyboard adapter  
Mini-DIN-6 female to DIN-5 male  
Part # F2N018, F2N018-xx  
NOTE: The “-xx” in the part number denotes cable length in feet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OmniView Cable Kits  
Belkin also offers complete OmniView Cable Kits. These include one keyboard, one mouse and the  
VGA cable for convenience.  
Select the appropriate one based on the type of mouse your computer uses. If the keyboard cable  
does not match with the port, simply attach one of the keyboard adapters mentioned above.  
OmniView PS/2 Cable Kit (for computers that use a PS/2 mouse)  
Part # A3X982  
2 x PS/2 male to male cables for keyboard and mouse (Part # F2N036-06)  
1 x HD-DB-15 male to female cable with thumbscrews for VGA (Part # F2N025-06-T)  
OmniView AT Cable Kit (for computers that use a serial mouse)  
Part # A3X932  
1 x DIN-5 male to male cable for keyboard (Part # F3A510-06)  
1 x DB-9 male to female with thumbscrews for serial mouse (Part # F2N209-06-T)  
1 x HD-DB-15 male to female cable with thumbscrews for VGA (Part # F2N025-06-T)  
2.  
Turn off all the computers, the monitor, and make sure the OmniView is not powered up  
before connecting or disconnecting any cables. DANGER: Attaching or disconnecting  
keyboards from computers when powered may trip the “pico fuse”, thereby permanently losing all  
keyboard control on the computer. If your OmniView is NOT cascaded (you are using only one  
OmniView), DIP switch 3 should be OFF (up), and switch 4 must be ON (down). You can set DIP  
switches 1 and 2 according to the table shown in the “Scan Mode” section.  
3.  
Connect the monitor to the OmniView. Using the cable that is attached or is included with the  
monitor, attach it to the HD-DB-15 female port on the console section of the OmniView.  
4.  
Connect the keyboard to the OmniView. Using the cable that is attached or is included with the  
keyboard, attach it to either one of the keyboard ports on the console section of the OmniView. If  
you have a PS/2 keyboard, plug it into the Mini-DIN-6 connector. If you have an AT-style  
keyboard, plug it into the DIN-5 connector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
Connect the mouse to the OmniView. Simply attach the mouse cable into the appropriate port on  
the console section of the OmniView.  
NOTE: If your computers ALL have PS/2 mice, you MUST use a PS/2 mouse on the console. If  
your computers ALL have serial mice, you MUST use a serial mouse on the console. However, if  
you have a mixture of computers, some of which have PS/2 mice and other have serial mice, you  
MUST have both a serial and a PS/2 mouse on the OmniView console. Using just one combo  
mouse will not work, and neither would attaching a combo mouse adapter on a non-combo mouse.  
Hence, you will have one keyboard, one monitor and two mice.  
6.  
Connect a computer to the OmniView.  
Attach the female end of the VGA cable into the computer’s HD-DB-15 port, and the female end  
into a HD-DB-15 port on the OmniView.  
Attach the keyboard cable (either PS/2 or AT-style) into the keyboard port of the computer.  
Plug in the opposite end into the appropriate port on the OmniView.  
Attach the mouse cable into the mouse port of the computer and into the OmniView, as above.  
If the computer is using a serial mouse, connect the male end of the cable into a DB-9 serial  
port on the computer, and plug in the female end into the serial mouse port on the OmniView.  
DO NOT use combo mouse adapters on the mouse cable, as doing so would not work and may  
cause data corruption when the computers are running. This is because PS/2 and serial mouse  
signals are completely different and incompatible with each other.  
7.  
Double check all the cabling and make sure that all the cables are securely inserted and screwed in  
where possible. Power up the OmniView, then you are ready to boot up all the connected  
computers!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cascading OmniViews  
OmniViews can be cascaded for control over more than 4 computers. The table below shows how many  
computers can be controlled from one keyboard, mouse and monitor using OmniView PS/2 4-Port units.  
Number of  
OmniViews  
Number of  
Computers  
1 to 4  
1
2
3
5 to 7  
8 to 10  
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
11 to 13  
14 to 16  
17 to 19  
20 to 22  
23 to 25  
26 to 28  
29 to 31  
32 to 34  
35 to 37  
38 to 40  
41 to 43  
44 to 46  
47 to 49  
50 to 52  
53 to 55  
56 to 58  
59 to 61  
62 to 64  
When OmniViews are cascaded, they should follow a tree configuration, not having more than three levels  
deep. The console (keyboard, mouse and monitor) is connected to the singular, top-level OmniView. See  
the figure below for more information:  
NOTE: OmniViews on the second and third level must have all their DIP switches set to OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT: Cascade Cable Kit  
There is a special cable kit that MUST be used when cascading two OmniView PS/2 4-Port units together.  
The part # is A3X1185-06. It includes the following cables:  
1 x DIN-5 male to male cable for keyboard (Part # F3A510-06)  
1 x DB-9 male to female with thumbscrews for serial mouse (Part # F2N209-06-T)  
1 x Mini-DIN-6 male to male for PS/2 mouse (Part # F2N036-06)  
1 x HD-DB-15 male to female cable with thumbscrews for VGA (Part # F2N025-06-T)  
Note: In any cascading situation, the DIN-5 male to male keyboard cable MUST be used to connect one  
OmniView to another. If a Mini-DIN-6 cable is used to cascade the keyboard signals, the data transfer is  
not reliable, and the entire set-up may fail. However, it is perfectly okay to use the Mini-DIN-6 cable to  
cascade the PS/2 mouse signals.  
Connecting one OmniView into another is just like connecting a computer into an OmniView. Simply connect  
the cascaded OmniView’s console port to one of its “parent” OmniView’s free ports, as below:  
Usage:  
Selecting which computer to operate can be done in two different ways - either by pressing the front-panel  
pushbutton, or by entering the hot-key sequence.  
Pressing the pushbutton in front simply cycles through every port on the OmniView, as shown by the  
solid green light on any of the “PC Ports” 1 through 4.  
To select a computer on cascaded OmniViews, press the button to select the port where the cascaded  
OmniView is connected. Then, select the port on the cascaded OmniView where the desired computer  
is connected.  
Entering the hot-key sequence allows direct port access from the keyboard, even through cascaded  
OmniViews. The procedure is very simple, and easy to remember:  
1. Press <ALT>+<CTRL>+<SHIFT> all at the same time, then release.  
2. Press the port number of the computer you wish to control. If you have cascaded OmniViews,  
you will have to press two (or three) numbers, x y z, where x is the port on the top level  
OmniView, y is the port on the second level OmniView, and z is the port on the third level  
OmniView. Press the correct key (or keys in succession), then release.  
3. Press <ENTER>, then release.  
You should hear a beep to confirm the OmniView has switched to the desired port. For example,  
pressing <ALT>+<CTRL>+<SHIFT> 1 2 3 <ENTER> selects Port 1 on the top level OmniView, Port 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
on the second level OmniView, and Port 3 on the third level OmniView. The OmniView filters out the  
hot-key sequences, preventing unwanted characters from appearing in the computer’s applications.  
Scan Mode  
The OmniView can be set for automatic scan mode. In scan mode, the OmniView switches from one  
computer to the next in regular time intervals set by the DIP switches. When the OmniView is in scan  
mode, there is no keyboard control passed to the displayed computers. This is necessary because  
switching is handled by the OmniView, not the operator.  
Note: Scan mode will continue indefinitely, until the <SPACE> bar is pressed and scan mode is terminated.  
Also, the OmniView will only scan to ports that have computers enabled on it.  
To invoke scan mode, the following hot key sequence must be entered:  
<ALT>+<CTRL>+<SHIFT> 0 <ENTER>  
You will then hear a beep to confirm scan mode is taking place, and this can be verified visually by the  
flashing lights on the currently selected computer port.  
Setting the scan time on each port is done through the DIP switches found on the back of the OmniView:  
DIP Switch Number  
Scan Time  
(seconds)  
1
2
3
4
ON  
OFF  
ON  
OFF  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
3
10  
20  
40  
Quick Last/Next Switching mode  
Quick Last/Next switching mode is similar to scan mode, except the operator has control over the switching.  
In this mode, the operator can press either one of the shift keys to switch to the adjacent computer  
previous or after the currently selected port. There is also no keyboard control during this mode, but the  
mouse is still completely operable.  
Note: Quick Last/Next switching mode will continue indefinitely, until the <SPACE> bar is pressed and is  
terminated.  
To invoke quick Last/Next switching mode, the following hot key sequence must be entered:  
<ALT>+<CTRL>+<SHIFT> 9 <ENTER>  
You will then hear a beep to confirm quick Last/Next switching mode is taking place, and this can be  
verified visually by the slow blinking light on the currently selected computer port.  
To select the next adjacent computer, press the RIGHT side <SHIFT> key.  
To select the previous adjacent computer, press the LEFT side <SHIFT> key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting:  
WARNING!  
Make sure that all equipment is turned off when connecting or disconnecting  
any cables. Plugging and unplugging cables while the computer or OmniView  
are powered could potentially damage the computer, the OmniView, or both.  
VIDEO  
Q: What are the tech specs for the video section of the OmniView?  
Compatible with VGA, SVGA and Multisync monitors  
Monitor Support: RGB Analog, Horizontal Sync, Vertical Sync  
VGA Bandwidth: 100 MHz  
VGA Resolution max: 1024 x 768  
Q: The monitor is fuzzy or I am getting ghosting or shadowing. What do I do?  
Check cable connections  
If shadowing only happens from one computer, try swapping the cables  
If possible, try a lower video resolution and/or refresh rate  
For high resolutions and/or long distances, use A3H981-xx-T cable, where “-xx” denotes the length  
of the cable in feet  
Q: I have a Monochrome monitor and it is not working. Why not?  
The OmniView supports SVGA, VGA, and Multisync monitors only  
KEYBOARD  
Q: The Keyboard is not detected, or a keyboard error is received during boot-up.  
Check cable connections  
Make sure the keyboard works when it is connected directly to the computer  
Make sure you are using the correct power supply, it should be 9VDC 600mA  
If you are cascading OmniViews, make sure you are using DIN-5 male to male cable to connect the  
keyboard ports between OmniViews  
Try a different keyboard  
Q: I am unable to select ports on the OmniView using the keyboard combinations.  
For Cascaded OmniViews make sure that all DIP switches on all levels other than the top level are  
all OFF.  
When cascading OmniViews, the DIN-5 male to male cable MUST be used for the keyboard, not the  
PS/2 male to male cable.  
Q: I have some computers that are AT-style keyboards and some that are PS/2-style keyboard, can I  
connect them both to the OmniView?  
Yes.  
Q: I am trying to cascade OmniViews but the lower level OmniViews are not working and/or are not  
responding to the port selections or "Hot Keys".  
Make sure that DIP switch 3 of the top level OmniView is set to OFF (or up). On all of the  
OmniViews below the top level, all DIP switches need to be OFF (or up).  
When cascading OmniViews, the DIN-5 male to male cable MUST be used for the keyboard, not the  
PS/2 male to male cable.  
Q: I have the OmniView in scan mode and it skips ports that do not have anything connected to it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
That is correct, the OmniView will only scan ports that have computers connected to it. It knows  
that something is connected to it by the power coming from the keyboard port.  
MOUSE  
Q: How do I control several computers if some use serial mice and others use PS/2?  
The OmniView PS/2 supports either PS/2- or AT-style (serial) mice. Note that the OmniView does  
not convert from one type to the other. If you wish to use PS/2 mice on some PCs and serial mice  
on others, you must attach two mice, one of each type, to the console port on the top-level  
OmniView. This allows control of multiple computers from one monitor, one keyboard, and two  
mice.  
Q: The mouse is not detected upon boot-up or the mouse is lost or acts erratically when switching ports.  
Check all cable connections.  
Do not move the mouse when switching and also give it a second or two after switching before  
moving the mouse.  
Check DIP switch settings. All should be ON except switch 3 to use a non-cascaded OmniView.  
Check the mouse driver, it should be the same as the type of mouse attached to the OmniView.  
Make sure you are using the correct power supply, it should be 9VDC 600mA.  
If you are cascading OmniViews make sure you are using a DIN-5 male to male cable to connect  
the keyboard ports between the OmniViews.  
If you are using Windows95 or Windows3.1, remove any unnecessary mouse drivers from DOS  
configuration files (config.sys and autoexec.bat).  
If the problem continues, try a different mouse.  
Boot up the computer with the its port selected on the OmniView  
Technical notes on specific devices:  
IBM ThinkPad:  
IBM ThinkPads use a proprietary interface for keyboards and mice, which may cause the mouse not to  
release from the port the ThinkPad is connected to. There are several solutions to this problem:  
1. Use a serial mouse to control all the computers, including the ThinkPad.  
2. Use a dedicated mouse for the ThinkPad, either PS/2 or serial will work fine.  
3. Disable the built-in pointer on the ThinkPad.  
4. If you have the ThinkPad on one port on the OmniView and you are using a PS/2 mouse, you  
may have to do the following: Select a port the ThinkPad is NOT on. If mouse control is lost,  
“tap” on the ThinkPad’s pointing device, and mouse control will be regained for that computer.  
Microsoft Intellimouse (the mouse with the wheel):  
Using this mouse can sometimes cause erratic mouse movement or loss of the mouse when switching  
ports on the OmniView from one computer to another. The solution for this is to not move the mouse  
when switching and also give it a second or two after the switch is made. Reasons for this reaction is  
still not known.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contacting Belkin Components  
Sales  
(310) 898-1100  
(310) 898-1100 x263  
Technical Support  
Web site  
Email  
FCC/CE Statement:  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if no installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio technician for help.  
CE Declaration of Conformity  
We, Belkin Components, declare under our sole responsibility that the F1D066, to which this  
declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and with Generic  
Immunity Standard EN50082-1 1992.  
BELKIN COMPONENTS PRODUCT WARRANTY  
Belkin Components warrants this product against defects in materials and workmanship for one  
year. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge  
provided it is returned during the warranty period, with transportation charges prepaid, to the  
authorized Belkin dealer from whom you purchased the product. Proof of purchase may be  
required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or  
misapplication; if the product has been modified without the written permission of Belkin; or if any  
Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL  
OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.  
BELKIN SPECIFICALLY  
DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition  
to this warranty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES  
RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY,  
INCLUDING BUT NO LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR  
REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH  
BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages or  
exclusions of implied warranties, so the above limitations of exclusions may not apply to you. This  
warranty gives you specific legal rights, and you may also have other rights that vary from state to  
state.  
OTHER BELKIN PRODUCTS:  
OmniView accessories  
F1D065-FSW  
F1D080  
F1D070  
Extension cables  
F2N035-xx  
F2N034-xx  
F2N209-xx  
F2N025-xx  
F2N006-xx  
F2N009-xx  
Accessories  
ErgoPad premiere etc…  
Printer sharing  
F1U123-KIT  
AirMetro  
ParaShare  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bissell Vacuum Cleaner 17G5 User Manual
Black Box Server 1108 Console Server User Manual
Bosch Appliances Home Security System DVAS User Manual
Bose Speaker 369946 1300 User Manual
Bowers Wilkins Speaker CWM3 User Manual
Broan Fan S110U User Manual
Calphalon Slow Cooker HE400SC User Manual
Canon Camcorder ZR40 User Manual
Casio Electronic Keyboard CTK 245 User Manual
Chicago Electric Power Hammer 40457 User Manual