Belkin Switch F1U123 KIT User Manual

Bitronics Dua lBus  
Switch Kit  
Us e r Ma nua l  
P73075  
F1U123-KIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thank you for purchasing the Belkin Components Bitronics DataSwitch Kit!  
Finally, you can share parallel-port devices and printers like never before.  
Because its electronic, its completely safe for all printers and does not void  
your printers warranty. And, since it operates like a manual switch, no  
software is required or power adapter needed. Its advanced yet simple  
design offers full IEEE 1284 communication in all modes for any and all  
parallel port devices. Share your parallel-port Zip® Drive between two PCs,  
or use a Laser Printer and a scanner on the same parallel port. All you have  
to do is press a button.  
Package Contents  
(1) Bitronics DataSwitch:  
F1U123  
(1) 6 ft. (1.8m) Belkin Pro Series  
IEEE 1284-compliant parallel cable,  
DB25 M/M, straight-through:  
F2A047-06  
P72009  
(1) Peripheral Sharing registration card  
This manual  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation  
The F1U123 Bitronics DataSwitch has three DB25 ports for connecting to  
the devices and/or computers. Depending on your application, the Bitronics  
DataSwitch Kit can be used in two different ways:  
a)  
One PC to two parallel port devices  
Two PCs to one parallel port device  
b)  
Please refer to the figure below for your application. Note that the included  
F2A047-06 cable can be used in any instance shown below.  
F2A047-XX Cable  
(One F2A047-06  
Included)  
Parallel  
Port Camera  
PC  
PC  
Parallel  
Printer  
Existing Cable  
F2A047-XX  
(One F2A047-06 included)  
F2A047-XX  
F2A046-XX  
(One F2A047-06 included)  
F2A046-XX  
PC  
Parallel Printer  
b) Two PCs to one parallel port device  
a) One PC to two parallel port devices  
Usage  
The Bitronics DataSwitch has two buttons on top shaped like arrows. When  
depressed, these buttons instantly connect” the middle DB25 port (common)  
to the port adjacent to the button. An LED next to the button indicates which  
port is currently active.  
To select Port A, firmly depress the button next to  
port A until the LED next to the button illuminates.  
The connection between Port A and the  
common port will remain active until  
Port B is selected.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice for Plug-and-Play Device Users  
Plug-and-Play is a new technology that allows the operating system to  
automatically recognize a device when the system boots up. However, if  
the Plug-and-Play device is connected to the F1U123, it must be  
“connected” to the PC when booting up for the operating system to  
recognize it. This means that in Diagram “a”, the port the Plug-and-Play  
device is connected to must be selected, or in Diagram “b”, the PC that is  
booting up must be selected. Examples of Plug-and-Play devices are  
removable-media hard disks, Parallel-to-SCSI adapters, and some brands  
of scanners.  
Recommended Cabling  
Belkin recommends the use of IEEE 1284-compliant cables for maximum  
signal transfer and integrity, especially in high-speed EPP and ECP  
modes. Below are the three IEEE 1284-compliant cables Belkin  
Components manufactures:  
F2A046-XX  
F2A047-XX  
F2A045-XX  
Belkin Pro Series IEEE 1284-compliant parallel printer  
cable, DB25 M/Cent 36M  
Belkin Pro Series IEEE 1284-compliant parallel cable,  
DB25 M/M, straight-through  
Belkin Pro Series IEEE 1284-compliant parallel  
printer cable, DB25 M/MicroCent 36M*  
*Used in connecting to a HP 5P/6P or any parallel printer  
that has a Micro Centronics 36 connector.  
The “XX” is the length of cable in feet. Hence, an F2A047-06 is a  
6 ft.1.8m cable.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
A Cables  
Make sure you are NOT using file-transfer cables.  
Special cables used in DOS Interlink, LapLink®, or Win95 Direct Cable  
Connection file-transfer cables are not wired “straight-through”. In  
these cables, not all the pins are used, therefore they will not function  
at all. Belkin’s F2A047-xx cables, such as the one included in this  
package, are recommended for 100% reliable operation.  
Make sure you are using high-quality IEEE 1284-compliant cables.  
Most new printers and parallel port devices demand the use of these  
cables mainly for signal integrity especially in high-speed data transfers.  
Lower quality cables do not feature the required double-shielded and  
twisted pairs, thereby increasing the chances of communication errors.  
The special construction of Belkin’s IEEE 1284-compliant cables not only  
reduce interference and retain a high signal-to-noise ratio, but also  
provide a lifetime of superior performance.  
Make sure your cables are not too long.  
Data transferred through the parallel port is reliable with 1.8m cables. If  
IEEE 1284-compliant cables are used, 3m cables may also be used.  
However, cables longer than 3m begin to degrade the signal, and signal  
loss is apparent by the much lower transmission speed and increased  
errors in the application.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
B. Application Errors  
Check that the proper port is selected.  
To achieve a link between the PC and the device, the LED of the correct  
port must be illuminated.  
Connect the devices directly to the PC.  
If the device does not properly respond when connected directly to the  
PC, the device may be damaged, not the F1U123 switch. Consult with the  
manufacturers tech support for assistance.  
Try rebooting the computer.  
By rebooting, the operating system checks the ports for the presence of  
the device. Make sure the correct port is selected so that the drivers are  
loaded, and the device is fully operable.  
Not enough power is being supplied to the switch.  
The F1U123 does not require power in normal instances. However, some  
parallel port devices and computers do not provide enough power to the  
switch. Therefore, an optional power adapter must be used. We  
recommend using Belkin part number F5B001-PWR. It is a special 7VDC  
200mA power supply, and simply plugs into the power connector on the  
side of the F1U123 switch. Use of other power supplies providing more  
than 7VDC will significantly compromise the life of the switch.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Belkin Products  
• Sleek ergonomic design  
• Unique thumb cradle  
for added support  
• Includes CursorWare®  
software for  
custom settings  
• Three functional  
MicroSwitch buttons  
• Connects to PS/2 port  
or standard RS-232  
serial port  
ErgoMOUSE™  
Om niViewKVM Switch Family  
• Dedicated processors  
for flawless boot-up  
• 1600 x 1200 maximum  
video resolution  
• Serial Mouse  
Conversion  
(OmniViewSE and  
PRO models)  
• DB25 Expansion ports  
• Microsoft®  
IntelliMouse® support  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Belkin Products (continued)  
• Comfort zone  
provides flexible  
ergonomic support  
• Curved design allows  
natural wrist  
movement  
ErgoPAD™  
Pump  
• Cable management  
system tucks away  
mouse cable  
• Also available  
ErgoPADGel with a  
GelFlexcomfort zone  
ErgoPADPremiere  
with AirFlex™  
Pump  
and  
comfort zone  
Play  
Technology  
• Available in black,  
blue and gray  
• Provides full IEEE  
1284 Bi-directional  
communication  
• Connect up to 4  
computers to  
2 devices  
simultaneously  
• Works with Zip®  
drives, scanners,  
printers, cameras or  
any parallel device  
• File-transfer feature  
• Comes with 2  
IEEE 1284  
Bitronics  
DualBus  
Switch Kit  
switchbox cables  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
FCC Statement  
CE Declaration of Conformity  
We, Belkin Components, declare under our sole responsibility that the F1U123-KIT, to which this declaration relates, is  
in conformity with Generic Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1 1992.  
Belkin Components One Year Product Warranty  
Belkin Components warrants this product against defects in materials and workmanship for one year. If a defect is  
discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the  
warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the  
product. Proof of purchase may be required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product  
has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER  
ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED  
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM  
ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST  
PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR  
DATA STORED IN OR USED WITH BELKIN PRODUCTS.  
Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied  
warranties, so the above limitations of exclusions may not apply to you. This warranty gives you specific legal rights,  
and you may also have other rights that vary from state to state.  
be lkin.com  
Belkin Components  
Belkin Components, Ltd.  
Unit 13 • Gatelodge Close • Round Spinney  
Northampton • Northants • NN3 8RX • UK  
Tel: +44 (0) 1604678300  
Belkin Components B.V.  
501 West Walnut Street  
Compton • CA• 90220 • USA  
Tel: 310.898.1100  
Diamantlaan 8 • 2132 WV  
Hoofddorp • The Netherlands  
Tel: +31 (0) 235698765  
Fax: 310.898.1111  
Fax: +44 (0) 1604678330  
Fax: +31 (0) 235612694  
© 1999 Belkin Components. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

BenQ Cell Phone M555C User Manual
BMW Automobile 635CSi User Manual
Boss Audio Systems Musical Instrument ME 50B User Manual
Boston Acoustics Speaker SPZ50 User Manual
Campbell Hausfeld Refrigerator CHN104 User Manual
Canon Camera Lens 100mm F 2 User Manual
Canon Computer Monitor V8000HDe User Manual
Casio Watch 1182 User Manual
Christie Digital Systems Projector DHD555 GS User Manual
Chromalox Electric Heater PF455 3 User Manual