™
OmniView
USB KVM Switch with Audio
Control up to four computers from one USB keyboard,
mouse, and monitor
belkin.com
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Components, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
User Manual
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
SOHO Series
F1DS102U
F1DS104U
P73976-C
© 2002 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed. Macintosh, Apple, Mac, and Mac OS are
trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
OVERVIEW
Direct-Access Port Selectors
Feature Overview
Direct-access port selectors, conveniently located on the front face of the
KVM Switch, allow for simple, manual port selection.
The OmniView SOHO Series USB KVM Switch with Audio (the KVM Switch)
allows you to control up to four computers, with one USB keyboard and
USB mouse and a VGA, SVGA, XGA, or XGA-2 video monitor.
Cable Management
USB Hot Keys
The designed enclosure offers built-in cable management to contain
connected cables. Once the cables have been connected and the shroud
slid into place, the cables are conveniently maintained through the
back opening.
Hot keys allow you to select ports using designated key commands from
your USB keyboard. Control up to two (for the 2-port unit) or four
(for the 4-port unit) computers, using a simple hot key sequence on
your keyboard.
LED Display
An LED display is added to the face of the KVM Switch for easy status
monitoring. A lit LED indicates which computer the console has control
of. The corresponding direct-access port selector is located next to the
LED. When pushed, the LED should light next to the port selector.
AutoScan
The AutoScan feature allows you to automatically scan and monitor the
activities of all operating computers connected to your KVM Switch, one
by one.
USB Device Ports
Video Resolution
Two USB device ports allow you to add shared peripherals. This reduces
cable clutter and eliminates the need to disconnect and reconnect
devices when switching between computers.
With a 400MHz bandwidth, the KVM Switch supports video resolutions of
up to 2048x1536@85Hz. To preserve signal integrity at high resolutions,
75-Ohm coaxial VGA cabling is required.
Flash Upgrade
Flash upgradeability allows you to obtain the latest firmware upgrades for
your KVM Switch. These upgrades will let your KVM Switch continue to be
compatible with the latest devices and computers. Firmware upgrades are
free for the lifetime of the product. Visit belkin.com for upgrade
information and support, or see the enclosed instruction document.
Microphone/Audio Support
The KVM Switch supports USB-type speakers and microphones and has
built-in microphone and speaker jacks to support the growth of
multimedia use in small-office and home-office environments. This feature
eliminates the need to disconnect and reconnect these devices when
switching between computers, and reduces the clutter on your desktop
with fewer speakers.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
OVERVIEW
Equipment Requirements
Cables
Operating Systems
Your KVM Switch is for use on CPUs using:
For each USB computer to be connected to the KVM Switch, one VGA
cable and one USB cable is necessary.
Platforms
• Windows® 98/2000/Me/XP, Mac® OS*, Linux®*
*with USB support
To support resolutions of up to 2048x1536@85Hz, use of a 75-Ohm
coaxial VGA cable is required to preserve signal integrity. Cables must
have HDDB15 female to HDDB15 male connectors.
Keyboards
• Supports 101-/102-/104-/107-key USB keyboards
Belkin OmniView KVM Cables for SOHO Series with Audio offer the highest
quality possible to ensure that your data is optimally transmitted and
include PC99 color-coded connectors for easier identification and
connection. Double-shielded, strain-relief constructed KVM Cables for
SOHO Series include an industry-standard, 14-pin, coaxial, VGA cable,
ferrite bead, and nickel-plated connectors for high-resolution
Mice
• USB-compatible USB mice with 2, 3, 4, or 5 buttons
Monitors
• VGA
• SVGA
applications. The following cables are recommended for your KVM Switch:
• MultiSync®
F1D9101-XX
(USB Style)
Microphone
• Multimedia microphone with 3.5mm connectors
-XX denotes the length in feet.
Audio
• Multimedia speaker/stereo with 3.5mm connectors
Power Supply
• 9V 1A power supply required
Unit Display Diagrams
The front of the KVM Switch
• Direct-access port selector
• LED for identification of selected port
• Removable shroud
Available in 6- and 10-foot lengths.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW
OVERVIEW
The back of the KVM Switch:
Where to Place the KVM Switch
The compact size of the KVM Switch makes it perfect for desktop
placement. Consider the following when deciding where to place the KVM
Switch: whether or not you intend to use the direct-access port selectors;
the length of the cables attached to your keyboard, mouse, and monitor;
the location of your CPUs from your Console; and the length of the cables
you will use to connect your computers to the KVM Switch.
2nd computer
VGA port—VGA 2
2nd computer
audio/microphone jacks
Cable Distance Requirements
2nd computer
USB port—USB 2
USB signals are the strongest when transmitted up to 15 feet between
the KVM Switch and the CPU. Beyond 15 feet, probability of signal
degradation increases, which can cause the device to fail.
1st computer
audio/microphone jacks
Cautions and Warnings
Avoid having cables near fluorescent lights, air conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).
1st computer
USB port—USB 1
1st computer
VGA port–VGA 1
Console
Console USB mouse
audio/microphone
jacks
Console USB keyboard
Console VGA port
USB device ports
RJ45 flash port
9V 1A power jack
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP-BY-STEP INSTALLATION GUIDE
OVERVIEW
This section provides complete instructions for the hardware setup of a
single KVM Switch. (F1DS102U, F1DS104U)
Specifications
Part No.: F1DS102U, F1DS104U
Power: 9V DC, 1A AC adapter (required)
PCs Supported: 2 (F1DS102U), 4 (F1DS104U)
Monitor Supported: VGA and SVGA MultiSync, LCD
Max Resolution: 2048x1536@85Hz
Keyboard Input: USB
Installing the KVM Switch Base
Hold the main housing with one hand and the base with the other.
With the narrow part of the base facing toward the rear of the housing,
align the hooks of the base to the base holes located underneath the
housing. Put the hooks through the holes and push the base toward the
front of the housing to lock the base into place. Please refer to diagram
for assistance.
Mouse Input: USB
USB Device Ports: 2
Audio Input/Output: 3.5mm jack (stereo)
Microphone Input/Output: 3.5mm jack
VGA Port: 15-pin HDDB type
LED Indicators: 2 (F1DS102U), 4 (F1DS104U)
Enclosure: high-impact plastic
Dimensions:
F1DS102U
6.75 (h) x 4.25 (w) x 7.75 (d) inches
F1DS104U
7.75 (h) x 4.75 (w) x 9.5 (d) inches
Weight:
F1DS102U 1.5 lbs.
F1DS104U 2.0 lbs.
Operating Temp: 32° to 104° F
Storage Temp: -4° to 140° F
Humidity: 0-80% RH, non-condensing
Warranty: 5 years
Note: Specifications are subject to change without notice.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP-BY-STEP INSTALLATION GUIDE
STEP-BY-STEP INSTALLATION GUIDE
Installing the HID USB Driver
Connecting the Console
1. Power down your computers.
Note: On some computers, you must enable USB support on your system
BIOS. Please reference your computer manufacturer’s manual or
motherboard manual to verify that USB support is enabled.
2. Remove the rear panel of the KVM Switch to expose the
ports.
1. Connect the 9V, 1A power adapter to the KVM Switch.
3.
Connect the USB keyboard to the designated USB
port with the keyboard symbol on the KVM Switch.
2. Boot up the computer you wish to connect via USB as you would
normally with the USB keyboard, monitor, and USB mouse connected
directly to the computer.
Note: You must connect the USB
keyboard to the designated USB
connector to have keyboard
hot key switching functions.
For more information on
3. After the operating system finishes loading, using a standard USB A-
to-B cable, insert the end with the B-type connector to the
KVM Switch. Insert the other end of the cable with the A-type
connector to an available port on your USB computer. Your computer
should recognize your KVM Switch and automatically install the HID
USB driver. Once the driver is installed, you can power down your
computer.
keyboard hot keys, see page 14.
4.
Connect the USB mouse to
the designated USB port
with the mouse symbol
on the KVM Switch.
4. Repeat steps 1 through 3 for each additional USB computer you wish
to connect to the KVM Switch.
5. Connect any USB devices
you wish to share to the USB hub labeled “Device 1, Device 2” on the
KVM Switch.
Note: When sharing USB storage devices, CD-RWs, or hard drives, do not
switch while operating.
6.
Connect the monitor cable to the designated
“Console VGA” port on the KVM Switch.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP-BY-STEP INSTALLATION GUIDE
STEP-BY-STEP INSTALLATION GUIDE
7. Using the audio cable attached to your speakers, connect the male
3.5mm plug to “audio” on the Console of your KVM Switch. (This step
is not required to use the KVM Switch.)
Connecting the PCs
1. Power up the computers. Once the operating system has loaded,
connect the KVM Switch and the computer using the USB cable. The
operating system will automatically install the KVM Switch.
8. Using the mic cable attached to your microphone, connect the male
3.5mm plug to “mic” on the Console of your KVM Switch. (This step is
not required to use the KVM Switch.)
2. Shut down your computer. Take the VGA cable and connect the male
end of the cable to the VGA port on the back of the computer.
Connect the female end of the VGA cable to the back of the KVM
Switch for CPU1. Do this for all computers.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP-BY-STEP INSTALLATION GUIDE
USING YOUR SOHO SERIES USB KVM SWITCH
You can select which computer to operate by either the direct-access port
selector located on the front panel of the KVM Switch or through
keyboard hot key commands. Note that it will take 1–2 seconds for the
video to display after switching. This is due to the refresh rate of the
video signal. There is also re-synchronization of the mouse and keyboard
signal that takes place. This is normal operation and ensures that proper
synchronization is established.
Selecting a Computer Using Direct-Access Port Selectors
You can directly select which computer you wish to control by pressing
the corresponding direct-access port selector next to the appropriate
port. The LED will be lit to indicate that the port is currently selected.
Selecting a Computer Using Keyboard Hot Key Commands
Note: You must connect the USB keyboard to the designated USB
connector to have keyboard hot key switching function on
the keyboard.
You can command the KVM Switch to switch ports with a simple keyboard
command sequence by using the [SCROLL LOCK] key and [UP], [DOWN]
arrow keys. To send commands to the KVM Switch, the [SCROLL LOCK] key
must be pressed twice within two seconds. You will hear a beep for
confirmation. Then you can press the [UP], [DOWN] arrow keys to switch
between ports.
3. Using the audio cable, connect one end of the male 3.5mm plug to
the “Speaker Out” jack of your sound card or computer, and connect
the other end of the “audio” jack of your KVM Switch.
4. Using a second audio cable, connect one end of the male 3.5mm plug
to the “Mic Out” jack of your sound card or computer, and connect the
other end of the “mic” jack of your KVM Switch.
Switch to next active port,
[UP] arrow
Switch to previous active port,
[DOWN] arrow
Powering Up the Systems
You can switch directly to any port by entering the port number of the port
you wish to use. For example, if you press [SCROLL LOCK], [SCROLL LOCK],
[2], the computer on port 2 will be selected.
Once all cables have been connected, turn on all CPUs that are attached
to the KVM Switch. All computers can be powered on simultaneously. Your
KVM Switch should be ready for use.
Switch to port 2—#2 key
Switch to port 4—#4 key
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR SOHO SERIES USB KVM SWITCH
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView KVM Switches
OmniView E Series
AutoScan Mode
In AutoScan mode the KVM Switch remains on one port for 10 seconds
before switching to the next. This time interval cannot be changed.
These KVM devices allow you to control two or four computers from one
console and make switching between computers more convenient.
Designed for compatibility with your PS/2 platform, they reduce desktop
clutter and provide a simple, reliable solution at a lower price point.
High-quality resolution of up to 2048x1536@85Hz is supported through
the E Series KVM Switch when used with coaxial VGA cabling, offering the
highest resolution without compromising the quality of the display. Power
for the KVM Switch draws off of the keyboard, meaning no power supply
is necessary and less cables to hassle with. Other standard features found
on this unit include: hot key functionality; PS/2 keyboard and mouse
emulations for error-free boot up; and a Belkin Two-Year Warranty.
To enable AutoScan mode press [SCROLL LOCK], [SCROLL LOCK],
[0], [0]
Note: There is no mouse or keyboard control in this mode. This is necessary
to prevent errors. Otherwise, if the user is moving the mouse or using the
keyboard when the KVM switches to the next port, communication between
the computer and KVM Switch could be interrupted and cause erratic mouse
movement, or wrong characters to display when using the keyboard.
To disable AutoScan mode, press the space bar.
F1DB102P E Series 2-Port KVM Switch, PS/2
F1DB104P E Series 4-Port KVM Switch, PS/2
OmniView SOHO Series with Audio
This innovative design provides built-in cable management and uses little
space while adding a whole new sculpted look to your desktop. The PS/2
KVM switch allows you to control two or four computers from one
console. Its convenient PS/2 compatibility makes it ideal for use with
PS/2 computers. The greatest interface flexibility is yours with PS/2 and
USB switches. They offer you expanded compatibility with either
interface, or both, along with the additional convenience of direct-access
port selectors on the face of the switch. The USB KVM Switch offers
support for USB computers and consoles. It includes a built-in, 2-port
USB device hub that allows you to connect additional shared peripherals.
Switch between speakers and microphones without having to unplug and
re-plug them when switching computers. The flash feature allows users to
download firmware updates to ensure compatibility with the latest
computers and devices. The designed enclosure offers cable management
in a neat and convenient manner. High-quality resolution of up to
2048x1536@85Hz is supported by the SOHO Series KVM Switch when
used with coaxial VGA cabling, offering the highest resolution without
compromising the quality of the display. Other standard features found on
this unit include: hot key functionality; keyboard and mouse emulations
for error-free boot up; and a Belkin Five-Year Warranty.
Enable AutoScan mode—#0 key
Connecting USB Devices to the Built-In 2-Port Hub
The KVM Switch includes a built-in 2-port USB device hub that allows you to
connect two additional shared peripherals. When you connect any USB
device to the KVM Switch, that device can be accessed through whichever
computer you are currently using.
Note: This is not suitable for storage devices such as LS-120 drives and Zip®
drives because you cannot dynamically switch ports and disconnect a
mounted storage device when it is in use by the operating system. For
example, you are working on computer 1 with a file open that is stored on a
Zip drive connected to the KVM Switch. If you switch to computer 2 while
the file is still open, you will get a “file lost or corrupted” error message on
computer one. The same will occur when you are using a streaming device
such as the Belkin VideoBus USB video capture device. You can switch from
one computer safely to the next, only if the VideoBus is no longer in use by
the first computer. You will notice that after the USB KVM switches to
another computer, the mouse remains inoperative for one or two seconds.
This is normal, and ensures that proper USB synchronization is established.
F1DS102P SOHO Series 2-Port KVM Switch with Audio, PS/2
F1DS104P SOHO Series 4-Port KVM Switch with Audio, PS/2
F1DS102U SOHO Series 2-Port KVM Switch with Audio, USB
F1DS104U SOHO Series 4-Port KVM Switch with Audio, USB
F1DS102T SOHO Series 2-Port KVM Switch with Audio, PS/2 & USB
F1DS104T SOHO Series 4-Port KVM Switch with Audio, PS/2 & USB
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BELKIN KVM SWITCHES AND ACCESSORIES
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView PRO2 Series with On-Screen Display
OmniView KVM Cables
OmniView PRO2 Series KVM Switches deliver reliability, performance, and
centralized control necessary for today’s enterprise environment. This
series of KVM Switches enables you to control multiple platform servers
from a single console. Available in the desktop-style, 4-port, and the 19-
inch rack-mountable. 8- and 16-port models, the OmniView PRO2 Series
KVM Switch expands easily for full control of as many as 256 CPUs
through dedicated daisy-chain ports. Video resolutions of up to
2048x1536@85Hz are supported through a 400MHz bandwidth. On-
Screen Display allows you to name and select attached servers using an
on-screen interface. Switch between ports by using hot key commands or
direct-access port selectors. The PRO2 Series uses standard cables for
easy installation; includes a 12-volt DC, 1-Amp power supply; and is
backed by a Belkin Five-Year Warranty.
OmniView KVM Cables provide you with the quality connections necessary
to set up your KVM solution. Each kit provides the proper cables and
connectors to complete the installation of a Belkin OmniView KVM
Switch. OmniView KVM Cables feature sturdy, strain-relief construction
and PVC overmolding to prevent data loss. Use of 20-gauge wire delivers
the high-performance cable that users have come to identify with the
Belkin name. A ferrite bead reduces electromagnetic and radio frequency
interference (EMI/RFI). PC99 color-coded connectors and modified
thumbscrews have been added for easier installation.
OmniView E Series KVM Cables
Belkin E Series Cables allow you to connect all your PS/2 computers to
your KVM switch while offering high performance.
• Industry-standard, 14-pin coaxial VGA cabling
• Nickel-plated connectors
F1DA104T PRO2 Series 4-Port KVM Switch with On-Screen Display,
PS/2 & USB
F1DA108T PRO2 Series 8-Port KVM Switch with On-Screen Display,
• Gray PVC Flextec jacket
Work with OmniCube™, OmniView SE, PRO, MATRIX, E, SOHO, PRO2 Series,
and many other KVM switches.
PS/2 & USB
F1DA116T PRO2 Series 16-Port KVM Switch with On-Screen Display,
PS/2 & USB
F1D9000-XX, PS/2 Style
OmniView MATRIX2 Series with Dual-Console Control
OmniView SOHO Series KVM Cables With Audio
SOHO Series Cables provide you with the proper connection between your
computers, speakers, and microphones, and your SOHO Series KVM Switch.
• Industry-standard, 14-pin coaxial VGA cabling
• One All-In-One 3.5mm audio/mic cable
• Nickel-plated connectors
• Gray PVC Flextec jacket
Work with OmniView SOHO Series KVM Switches.
F1D9100-XX, PS/2 Style
OmniView MATRIX2 Series 8- and 16-Port KVM Switches enable two
administrators to control up to eight or 16 PS/2 and USB platform
servers, separately or simultaneously. Each user operates a separate
console following a different bus path for complete independence from
the other console. The OmniView MATRIX2 Series KVM Switch expands
easily for full control of as many as 256 computers through dedicated
daisy-chain ports and is natively rack-mountable for server room
environments. Video resolutions of up to 2048x1536@85Hz are
supported through a 400MHz bandwidth. On-Screen Display allows you to
name and select attached servers using an on-screen interface. Switch
between ports by using hot key commands or direct-access port
selectors. The MATRIX2 Series uses standard cables for easy installation;
includes a 12-volt DC, 1-Amp power supply; and is backed by a Belkin
Five-Year Warranty.
F1D9101-XX, USB Style
F1DM208T MATRIX2 Series 8-Port KVM Switch with Dual-Console Control,
PS/2 & USB
F1DM216T MATRIX2 Series 16-Port KVM Switch with Dual-Console Control,
PS/2 & USB
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BELKIN KVM SWITCHES AND ACCESSORIES
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView Gold Series All-In-One KVM Cables
OmniView PRO Series Plus All-In-One KVM Cables
Belkin PRO Series Plus Cables allow you to easily connect all your
computers and servers to your OmniView KVM Switches, and are molded
together for better cable management.
• All-In-One molded design for cable management
• Industry-standard, 14-pin coaxial VGA cable
• Nickel-plated connectors
• Gray PVC Flextec jacket
Work with OmniCube, OmniView SE, PRO, MATRIX, E, SOHO, PRO2 Series,
and many other KVM switches.
Belkin Gold Series Cables offer the highest-possible cable performance,
providing maximum conductivity and error-free data transmission. These
cables allow you to easily connect all your computers and servers to your
OmniView KVM Switches, and are molded together for better
cable management.
• All-In-One molded design for cable management
• Custom, 15-pin coaxial VGA cabling
• 24K gold-plated connectors
• Black PVC Flextec jacket
F3X1105-XX, PS/2 Style
F3X1962-XX, USB Style
Work with OmniCube, OmniView SE, PRO, MATRIX, E, SOHO, PRO2 Series,
and many other KVM switches.
F3X1835-XX-GLD, PS/2 Style
F3X1895-XX-GLD, USB Style
OmniView MATRIX Series All-In-One KVM Cables
Belkin MATRIX Series Cables provide optimum connectivity between each
of your servers and your MATRIX2 Series KVM Switches. The MATRIX Series
Cables use advanced micro-cable construction to deliver fast and reliable
data transfers.
• Advanced, micro-cable construction
• All-In-One molded design for cable management
• Industry-standard, 14-pin coaxial VGA wiring
• Nickel-plated connectors
• Gray PVC Flextec jacket
Work with OmniView MATRIX2 Series KVM Switches.
F1D9300-XX, PS/2 Style
OmniView Daisy-Chain Cables
These cables let you daisy-chain multiple KVM switches together to
expand the size of your PRO2 or MATRIX2 Series KVM configuration. Made
of premium wires and coaxial VGA lines, these cables preserve signal
integrity from the first to the last computer.
For PRO2: F1D108-CBL (Available in lengths of 2 and 6 feet)
For MATRIX2: F1D9302-XX (Available in lengths of 1, 3, and 5 feet)
(-XX denotes the length in feet)
F1D9301-XX, USB Style
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQs
BELKIN KVM SWITCHES AND ACCESSORIES
OmniView KVM Accessories and Adapters
Q: What operating systems does the KVM Switch support?
Belkin KVM technology includes various accessories and adapters to
complete your KVM solution. The adapter series converts Mac®, Sun™, or
USB keyboards, video, and mouse signals into PS/2 and VGA.
A: The KVM Switch will support any operating system that runs in a USB
platform. Operating systems include, but are not limited to, Windows
98/2000/Me/XP, Linux, and Mac OS.
™
F1D080 – The OmniView PS/2 Mac Adapter converts a Macintosh®
computer with a 4-pin ADB™ (Apple® Desktop Bus) and DB15 connector
into a PS/2 keyboard, HDDB15 VGA monitor, and PS/2 mouse.
Q: What does flash-upgradeable mean?
™
A: With flash-upgrade capability, you can update your KVM Switch’s
firmware at any time through a simple parallel connection. Internet-
upgrade capability ensures that your KVM Switch is always the most
current version on the market with the latest features and
enhancement.
F1D082 – The OmniView PS/2 Sun Adapter converts a Sun 8-pin
keyboard/mouse and 13W3 video into a PS/2 keyboard, PS/2 mouse, and
VGA monitor.
F1D084 – The OmniView CAT5 Extender enables you to control a PC
or KVM switch up to 500 feet (152.4m) away using standard UTP
CAT5 cabling.
F1D087 – The OmniView Keyboard Extender allows you to extend your
Q: What is the maximum video resolution that the KVM
keyboard up to 250 feet (76.2m) away.
Switch supports?
F1D088 – The OmniView VGA Monitor Extender bridges up to 250 feet
(76.2m) of distance between your PC and monitor.
A: The advanced video circuit in the KVM Switch supports a maximum
resolution of 2048x1536@85Hz.
F1D089 – The OmniView Keyboard Splitter allows you to work with two
kinds of PS/2 keyboards and pointing devices without swapping cables or
rebooting the computer.
F1D090 – The OmniView Mouse Splitter allows you to work with two
kinds of PS/2 mice or trackballs without swapping cables or rebooting
the computer.
Q: What video bandwidth does the KVM Switch support?
A: The KVM Switch supports 400MHz video bandwidth.
Q: How far can the computer be from the KVM Switch?
F1D201 – The OmniView 2-Port Reverse KVM Switch gives two users
A: When using USB connection between your KVM Switch and computer,
we recommend that your computer be no more than 15 feet (5
meters) away
central control of one PC from two sets of keyboards, monitors, and mice.
F5U119 – The Belkin PS/2-to-USB Adapter converts PS/2 keyboard and
mouse signals to USB format.
Q: Does the KVM Switch support Microsoft® IntelliMouse®?
A: The KVM Switch supports mice from Microsoft, Logitech®, Kensington®,
and Belkin. Please contact Belkin Technical Support for compatibility
issues you may experience.
F1DR200 – The OmniView SOHO Series 2-Port Replacement Kit includes
shroud, base, flash cable, two PS/2 extension cables, and SOHO Series
User Manual.
F1DR400 – The OmniView SOHO Series 4-Port Replacement Kit includes
shroud, base, flash cable, two PS/2 extension cables, and SOHO Series
User Manual.
OmniView Power Supplies
F1DS001-PWR – 9V AC, 1A
F1D084-PWR – 9V AC, 500mA
F1D065-PWR – 9V DC, 600mA
F1D108-PWR – 12V DC, 1A
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQs
TROUBLESHOOTING
Q: Does the KVM Switch support the volume up, volume down, mute, and
GENERAL
eject keys?
My computer does not boot up when connected to the KVM Switch but
works fine when I connect the USB keyboard, video, and USB mouse
directly to the computer.
A: No, the KVM Switch will not support these keys.
Q: Does the KVM Switch support Microsoft keyboards?
• Make sure that the USB cable is properly connected between the KVM
Switch and the computer.
A: Yes, the KVM Switch is compatible with Microsoft Internet Keyboard
PRO, Natural® Keyboard PRO, and Logitech keyboards with up to
standard 107-key support only.
• Make sure that the USB keyboard and USB mouse are properly
connected on the Console.
Q: Does the KVM Switch support wireless mice and keyboards?
A: Yes, the KVM Switch supports wireless mice and keyboards.
VIDEO
I am getting ghosting, shadowing, or fuzzy images on my monitor.
Q: How does the KVM Switch user switch between ports?
• If you are running high-resolution applications, use high-quality
cables to preserve signal integrity for maximum reliability.
A: The KVM Switch supports two methods of port selection. The user can
select computers using specially designated keyboard hot keys, or
independently access the desired port by pushing the direct-access
port selectors. For keyboard hot key functions, the Console keyboard
must be connected to the designated
• Check that all video cables are inserted properly.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
keyboard port.
• Check that the graphics card you are using supports the resolution and
refresh-rate setting on your computer.
Q: Does the KVM Switch require a power supply?
A: Yes, the KVM Switch requires a 9V DC, 1A AC power adapter to
I am getting a black screen on my monitor.
function properly.
• Check that all video cables are inserted properly.
• Make sure the 9V DC, 1A AC adapter is connected to the
KVM Switch.
Q: How long is the warranty for the KVM Switch?
A: The KVM Switch comes with a five-year limited warranty.
• Connect your monitor directly to the computer to verify that your
monitor is functioning properly.
Q: Can I attach a USB hub to the device ports on the KVM Switch to
share more peripherals?
• Make sure the monitor you are using supports the resolution and
refresh-rate setting on your computer.
A: Yes, but only if the USB hub is powered by its own power adapter.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TROUBLESHOOTING
KEYBOARD
MOUSE
The computer does not detect a keyboard and I get a keyboard error
reported at boot up.
The mouse is lost when I switch to a different port.
• Check that the USB mouse you are using is connected properly to the
Console of the KVM Switch.
• Activate USB support on boot up on the BIOS.
• Try using a different keyboard.
• Disconnect and reconnect the USB cable attached to the channel with
which you are experiencing problems to re-synchronize the mouse
connection.
• Try connecting the computer to a different port on the
KVM Switch.
• Make sure the mouse works when directly plugged into
the computer.
• Try connecting the USB cable to a different port on the computer.
• Check that the USB cable between the KVM Switch and the computer
are properly connected.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
There is a loud, long beep coming from the KVM Switch.
• Deactivate power-management schemes on the PC with which you are
experiencing problems.
• Make sure the USB keyboard is properly connected to the specified
USB keyboard port on the KVM Switch.
• Uninstall any mouse software on your computer.
• Try a different mouse.
• Check that the USB cable between the KVM Switch and the computer
are properly connected.
The computer boots up, but the mouse does not work.
• Disconnect and reconnect the power jack.
• Make sure the mouse is properly connected to the Console.
I cannot get the keyboard hot keys to function on my KVM Switch.
• Disconnect and reconnect the mouse cable attached to the channel
with which you are experiencing problems to
• Make sure that the keyboard is connected properly to the designated
USB keyboard port on the KVM Switch.
re-synchronize the mouse connection.
• Try another keyboard.
• Connect the mouse to ports located on the Console.
• Try a different mouse.
Some of the keys on my keyboard are not functioning properly when I
use a Mac computer.
• Because you are using a PC keyboard on a Mac system, a few of the
option keys on your PC keyboard may be reversed. All major keys will
have their functions labeled.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY, FCC, ICES, AND CE STATEMENTS
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our
sole responsibility that the products:
F1DS102U
F1DS104U
to which this declaration relates:
Comply with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the products F1DS102U and F1DS104U,
to which this declaration relates, are in conformity with Emissions Standard EN55022 and with Immunity
Standard EN55024, LVP EN61000-3-2, and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B
est conforme á la norme NMB-003 du Canada.
Belkin Corporation Limited Five-Year Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its warranty
period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge
provided it is returned during the warranty period, with transportation charges prepaid, to the authorized
Belkin dealer from whom you purchased the product. Proof of purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or
misapplication; if the product has been modified without the written permission of Belkin; or if any
Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR
WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to
this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM
ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST
PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR
DATA STORED IN OR USED WITH BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
exclusions of implied warranties, so the above limitations of exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights that vary from state
to state.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
|