OmniView® Serial Console Server
Network Configurations (Continued)
Network Setting with Web Interface
1.
Type in the Console Server’s IP address in the browser’s address field, using this format: http://XXX.XXX.XXX.XXX
Default user
name/password:
admin/admin
2.
Click on “Network” to open the Network-Configuration page.
Quick Installation Guide
F1DP116S
Package Contents:
3.
Assign a static IP and other network settings. Click on “Save & Reboot” to store any network-configuration settings.
Note: If the user leaves the web browser idle for more than 30 minutes, the login session will time-out and terminate the session.
OmniView Serial Console Server
AC Power Cord
DB9F–RJ45F Adapter, DTE
Part Number: F1D120
DB25F–RJ45F Adapter, DTE
Part Number: F1D121
Congratulations
You have completed the installation of your OmniView Serial Console Server.
To further configure the functions of your Console Server, please refer to your User Manual.
RJ45 Cable, 6 ft.
DB25M–RJ45F Adapter, DCE
Part Number: F1D122
DB25M–RJ45F Adapter, DTE
Part Number: F1D123
RJ45M–RJ45F Adapter, Sun
Part Number: F1D124
User Manual CD
Quick
Installation Guide
Rack-Mount Brackets
and Screws
Local console port adapter
DB9F–RJ45F
Order Additional Serial Adapters
Contact your sales rep today and ask for these serial adapters.
Hardware Installations
Belkin Part Number
Description
Application
F1D120
F1D120-8PK (8-Pack)
DB9F–RJ45F Adapter
DB25F–RJ45F Adapter
DB25M–RJ45F Adapter
DB25M–RJ45F Adapter
RJ45M–RJ45F Adapter
Bay Accelar, Nortel, or other DB9 DTE serial devices
F1D121
F1D122
F1D123
DTE serial devices with DB25 ports
DCE serial devices with DB25 ports (e.g., modem)
Sun SPARC or other DTE devices with DB25 ports
Sun/Cisco devices with RJ45 ports
F1D124
F1D124-8PK (8-Pack)
CAT5 cable
(straight)
CAT5 cable
(straight)
CAT5 cable
(straight)
CAT5 cable
RJ45-to-DB9M
adapter
DB9F
Ethernet
Port
Local console
OR
port adapter
Modem
Devices to be controlled
Controlling host
Controlling host
OmniView® Serial Console Server
Network Configurations
Identify Your IP Address
To identify the IP address on your network, use the MAC address located on the back of the Console Server. If no DHCP
server is found on your network, the Console Server will boot with the following static IP address: 192.168.2.156.
Assigning IP from the Console Port—VT-100 (Console, Telnet, SSH)
1.
Connect the console port on the rear panel to a serial port on a PC host using the CAT5 cable
and the console port adapter, included with the Belkin Console Server.
Belkin Tech Support
Belkin Ltd.
Belkin Ltd.
US: 800-223-5546 ext. 2263
310-898-1100 ext. 2263
UK: 0845 607 77 87
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
2.
Configure a terminal emulation program, such as HyperTerminal, using the following parameters:
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
+44 (0) 1933 31 2000 fax
•
•
•
•
•
Baud rate = 115200
Data bits = 8
Stop bits = 1
Parity = none
Flow control = none
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Default user
name/password:
admin/admin
Network > IP Config
3. Enter IP Config for network settings.
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Download from Www.Somanuals.com. All Manuals Search And Download.
P75599
|