Belkin Network Router F7D4302AU User Manual

Play  
wireless router  
User Manual  
F7D4302au 8820au00380  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
What’s in the box  
Initial setup  
Play Wireless Router  
Where to Place Your Router  
Ethernet cable (attached to router)  
Power supply (attached to router)  
Network information card (attached to router)  
Belkin Setup CD with User Manual  
For the best results, place the Router next to your modem in  
an open location away from large metal objects and magnets  
such as those found in speakers. Raising the Router above  
floor level can improve the strength of your wireless signal.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
How to set It Up  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
1  Connect your Router’s Ethernet cable to your modem’s Ethernet  
port (on the back of your modem). This port might be labeled  
differently on your particular modem. If you are adding a  
Router for the first time, this port may be connected to your  
computer by an Ethernet cable. It is OK to disconnect your  
computer and plug the Router into the modem instead.  
2  Plug the Router’s power supply into a wall outlet.  
3  Put the CD into your computer. If the CD doesn’t  
open automatically, please browse to your CD drive  
and double-click on the Belkin Setup CD icon.  
Setup  
4  Click the Setup icon on the CD menu.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
5  After a brief installation, the setup software will ask you  
for the network name and password from the network  
information card that is attached to your Router. Store the  
card under the base of your Router for future reference.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
6  A progress screen will appear while additional software is  
installed. This may take a few minutes to complete. Once  
finished, a “Success” message will appear indicating that you  
are connected to the Internet via your new Belkin Router.  
During setup you may be asked for additional information  
You may need to enter a username and password provided  
by your ISP. This username and password is likely to be  
found on materials that came from your ISP when you  
signed up for service. If necessary, you may need to contact  
your ISP to retrieve your username and password.  
If you have a static IP address, you may need to enter  
additional information also provided by your ISP.  
If your computer doesn’t have a wireless adapter, or the  
setup software is unable to control it, you may be asked to  
connect your computer to the Router with a network cable.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
advanced Tools & settings  
After the initial setup is complete, you have the option to  
change settings like your network name, security type, and  
password. To make these changes and others, click on the  
Advanced Tools icon at the CD Setup menu and select one  
of the following settings that you would like to change:  
network name & security – Personalize your network name  
(SSID), password, and strength of wireless security.  
Internet service Provider & login settings – Have  
you moved or changed Internet Service Providers?  
If you’d like to change these settings without running  
through the setup process again, this is the place.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
The belkin Router Manager  
The Belkin Router Manager appears in your system tray  
(Windows) or menu bar (Mac). Its icon indicates the current  
status of your Router and also allows you to access your  
Router’s settings to make changes. It also provides quick  
access to software that came bundled with your Router.  
Belkin.2234  
Router Settings  
User Manual  
To access the Router settings, click on the icon  
and select from the menu that appears.  
The status of your Router is shown by the Belkin Router Manager  
icon, which closely mimics the light on the front of the Router.  
USB Print & Storage Manager  
Memory Safe: Get Started!  
Green: You are connected to your Belkin Router  
and it is connected to the Internet.  
amber: You are connected to your Belkin Router,  
but it is not connected to the Internet.  
Daily DJ: Get Started!  
Music Labeler  
Check for Updates  
Options  
Exit  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
Manual setup Using Your browser  
in anything else such as “www”). Then press the Enter key. If  
you’re still having trouble running the manual setup option, type  
“192.168.2.1” in your browser (you do not need to type in anything  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
Using the CD  
adding Computers to Your network  
1  Put the Setup CD into your computer. If the CD  
doesn’t open automatically, browse to your CD  
drive and open the Belkin Setup CD icon.  
Wireless devices such as computers, network printers, and gaming  
systems can connect to your Router with a few simple steps.  
2  Click the Setup icon on the CD menu.  
3  After a brief installation, the setup software will ask you for the  
network name and password from the network information card  
that came with your Router. This card is most likely now located  
underneath the foot of your Router in the provided card slot.  
4  A progress screen will appear while additional software is  
installed. This may take a few minutes to complete. Once  
finished, a “Success” message will appear indicating that you  
are connected to the Internet via your new Belkin Router.  
note: The setup software runs only on  
Windows and Mac OS X systems.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
Manually  
Using the WPs button  
If you choose not to use the included Setup CD for  
adding additional computers or wireless devices, you  
can manually add these items to your network.  
1  Start WPS Push Button Connection (WPS PBC) on your  
computer or other Wi-Fi device that you would like to connect  
wirelessly to your Router. Often there will be a button for this  
purpose in software that came with the device, or a physical  
“WPS,” “PBC,” or “Security” button on the device itself.  
1  Locate the wireless-network-connections option  
on your computer or wireless device.  
2  Within two minutes, press the WPS button on your Router.  
2  Select your Belkin Router from the list of available networks. You  
can identify your Belkin Router by locating the network name  
(SSID) from the card located underneath the foot of your Router.  
The WPS light (small light above WPS button) will blink green while  
it listens for your Wi-Fi device. Once a connection is established, the  
light will turn green and then go out. If a connection is not established,  
the light will blink amber. You may repeat the process to try again.  
3  Enter your network password (located on  
your network information card).  
You can repeat this process for each WPS-enabled  
device you’d like to add to your network.  
Your wireless device will take a few moments to connect to your  
network. If the connection is not made the first time, try this  
process again. If you still have difficulty connecting to your network  
after trying this process a few times, see the “Troubleshooting”  
section in this manual for help with connecting to your network.  
note: In some cases you may be prompted to select the  
security type. It is printed on the card for your convenience.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
adding Usb Devices  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
adding a Drive  
adding a Printer  
You can share a USB hard drive or flash drive to your network via  
your Router’s USB port. Once connected, you can share files and  
music with other computers and devices within your network.  
You can add a printer to your network via your Router’s  
USB port. Once connected, you can print from various  
computers and wireless devices within your network.  
Plug your USB hard drive into the USB port on the back  
of your Router. When the light above the USB port is lit,  
your drive is available to computers on your network.  
Plug your printer’s USB cable into the USB port located on  
the back of your Router. When the light above the USB port is  
lit, your printer is available to computers on your network.  
You can manually check the status of your shared drive by visiting  
the USB Print and Storage Manager, found under the Belkin Router  
Manager icon displayed in your system tray (Windows) or menu  
bar (Mac). If you have difficulty sharing a drive on your network,  
please see the “Troubleshooting” section of this manual.  
You can manually check the status of your printer by visiting the  
USB Print and Storage Manager, found under the Belkin Router  
Manager icon displayed in your system tray (Windows) or menu  
bar (Mac). If you have difficulty sharing a printer on your network,  
please see the “Troubleshooting” section of this manual.  
note: Each computer that will use the printer must have  
both the Belkin software and the printer’s driver installed.  
If the print driver is not installed, you will be asked to install  
it by the Belkin USB Print and Storage Manager.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
adding Other Usb Devices  
Other USB devices may also be shared via your Router.  
Plug your device into the USB port located on the back of  
your Router. When the light above the USB port is lit, your  
device is available to computers on your network.  
Computers running the Belkin USB Print and Storage Manager will  
be able to make use of the shared device by visiting the USB Print  
and Storage Manager, found under the Belkin Router Manager  
icon displayed in your system tray (Windows) or menu bar (Mac).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
Memory safe  
bundled software  
Memory Safe allows you to set up a routine backup of your  
files to a hard drive or flash drive attached to your Router.  
Memory Safe is found in the Belkin Router Manager icon  
displayed in your system tray (Windows) or menu bar (Mac).  
Usb Print and storage Manager  
The USB Print and Storage Manager helps to manage and  
monitor the use of your USB printers, scanners, hard drives,  
and other devices that are connected to your Router’s USB  
port and shared across your network. USB Print and Storage  
Manager is found in the Belkin Router Manager icon displayed  
in your system tray (Windows) or menu bar (Mac).  
Music labeler  
Belkin Music Labeler corrects metadata (track names, artist  
names, track numbers, etc.) in your iTunes and Windows Media  
libraries, making it easy to find the music you are looking for.  
Music Labeler is found under the Belkin Router Manager icon  
displayed in your system tray (Windows) or menu bar (Mac).  
When you have one or more USB devices attached to your  
Router, the main actions for those devices are available  
directly from the Belkin Router Monitor menu.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
Daily DJ  
Belkin Daily DJ delivers personalized playlists from your  
music collection, automatically, every day. It’s like having your  
own personal DJ playing the songs that you want to hear. It  
works great with iTunes and Windows Media Player. Daily  
DJ is found under the Belkin Router Manager icon displayed  
in your system tray (Windows) or menu bar (Mac).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG sTaRTeD  
Video Max  
additional Capabilities  
Video Max automatically prioritizes your network traffic to  
ensure high-quality streaming video, VoIP calls, and games.  
Guest access  
Music Mover  
You can allow guests to use your Internet connection without  
joining your personal network. The network name and  
password for the guest network is located on the network  
information card found under the foot of your Router.  
Music Mover sends music from a USB drive attached to your  
Router to any UPnP (Universal Plug-and-Play) or DLNA-compatible  
device on your network. These devices include certain gaming  
systems, televisions, Blu-ray players, and cell phones.  
A person using your guest network will be able to join  
without a password, but will be shown a login page when  
they attempt to surf the Web. They will need to enter  
the guest password into this page to continue.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG TO KnOW YOUR ROUTeR  
front Panel  
b) Wi-fi Protected setup (WPs) light and button  
The WPS button on the front of your Router can be used to  
help establish a secure connection between your Router and  
other WPS-enabled Wi-Fi devices such as computers. To use  
the WPS feature on your Router, see “Getting Started > Adding  
Computers to Your Network > Using the WPS Button”.  
(a)  
(b)  
The small light near the WPS button shows what is happening  
while you are using WPS to establish a connection.  
Off: Idle  
blinking Green: The Router is listening for a  
WPS-enabled computer or other device.  
a) Router status light  
solid Green: The Router has made a secure  
Your Router’s status is shown by the light on the front.  
Off: The Router is not plugged into a power source.  
blinking Green: The Router is starting up.  
solid Green: The Router is connected to the Internet.  
connection with the computer or other device.  
amber: A connection was not created.  
blinking amber: The Router can’t detect the modem. Either the  
modem is off, is not plugged into the Router, or is unresponsive.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeTTInG TO KnOW YOUR ROUTeR  
back Panel  
a) Modem (Wan) Connector  
C) Usb Port  
D) Reset button  
Connect your modem to this  
port using an Ethernet cable.  
USB printers, disks, and other  
USB devices plugged into this  
port will be shared on your  
network. Each USB port has a  
light that indicates its status.  
This button is used to restart  
your Router in rare cases when it  
functions incorrectly. Resetting  
the Router will preserve your  
settings. This button may also  
be used to restore the factory  
default settings. Please see  
the Troubleshooting section  
for more information.  
(a)  
b) Wired (lan) Connectors  
Off: No USB device is  
Connect computers and other  
wired network devices to these  
ports using Ethernet cables.  
connected or the attached  
USB device is not in use.  
(b)  
blinking: Please wait to  
unplug the device until  
the light turns off.  
e) Power Connector  
On: The USB device is  
connected and being  
shared on your network.  
Connect the included power  
supply to this jack.  
(c)  
(d)  
(e)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TeCHnICal DeTaIls  
Universal Plug-and-Play (UPnP) Compatibility  
Technical features  
The UPnP (Universal Plug-and-Play) feature in your Router  
offers seamless operation of voice and video messaging,  
games, and other applications that are UPnP-compliant.  
Integrated 802 11n Wireless access Point  
Utilizing Dual-Band Network technology, your Router  
creates two separate networks (one at 2.4GHz band and  
the other at 5GHz band), allowing increased bandwidth to  
all your connected wireless devices and computers.  
Web-based advanced User Interface  
You can easily make changes to your Router’s advanced  
settings through your web browser. These changes can  
be made from any computer on your network.  
naT IP address sharing  
belkin Router Monitor  
To save you the cost of adding IP addresses per  
computer in your house, your Belkin Router uses Network  
Address Translation (NAT) technology, allowing you to  
share a single IP address across your network.  
The Belkin Router Monitor application helps you to monitor  
your Router’s status and change network settings.  
Integrated 4-Port 10/100 switch  
sPI firewall  
Your Router has a built-in, 4-port network switch to  
allow your wired computers to share: printers, data,  
MP3 files, digital photos, and much more.  
Your Router is equipped with a firewall that will protect your  
network from a wide array of common attacks and viruses.  
Usb Port  
The USB port lets you plug in printers, hard drives, and  
other USB devices to share across your network.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TeCHnICal DeTaIls  
setup software  
system Requirements  
A computer running Windows® XP SP2 or higher,  
Windows Vista®, or Windows 7; or Mac OS® X v10.x  
Router  
Minimum 1GHz processor and 256MB RAM  
600MB of free hard-drive space for installation  
Broadband Internet connection such as a cable or  
DSL modem with RJ45 (Ethernet) connection  
At least one computer with an installed network interface adapter  
TCP/IP networking protocol installed on each computer  
RJ45 Ethernet networking cable  
Memory safe and Usb Print and storage Manager  
Windows XP SP2 or higher or Windows  
Vista; or Mac OS X v10.4 or later  
Internet browser  
Minimum 1GHz processor and 256MB RAM  
50MB of free hard-drive space for installation  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TeCHnICal DeTaIls  
Daily DJ and Music labeler  
PC  
Windows XP SP2 or higher, Windows Vista, or Windows 7  
2GHz processor  
1GB of RAM  
DirectX® 9.0-compliant video and sound  
Internet Explorer® or Firefox®  
Mac®  
Mac OS X v10.4.8 or later  
Intel® Core™ Duo 1.83GHz or higher processor  
1GB of RAM  
Safari® or Firefox  
200MB of free hard-drive space for installation  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
belkin setup cannot find my Router  
Troubleshooting  
If Belkin Setup is not able to communicate with your Router during  
the installation process, please check the following items.  
The setup CD does not automatically start  
1  Make sure that the wireless hardware on your  
If Belkin Setup does not run when you insert the CD-ROM, your  
computer may not be configured to open CDs automatically.  
computer is turned on, if available.  
2  Try connecting your computer to one of the four “wired”  
If Belkin Setup does not appear within 15 seconds, browse  
to your CD-ROM drive and open the “Belkin Setup” icon.  
Alternatively, you may visit http://router/ and perform the  
setup manually. Please see “Manual Setup Using Your  
Browser” earlier in this manual for more information.  
ports on the Router with an Ethernet cable.  
3  Ensure that the Router is on. The front-panel light should be on.  
4  Unplug the Router’s power supply for 10  
seconds, then plug it back in.  
5  There may be firewall software on your computer preventing  
an outgoing connection. You may choose to temporarily  
disable this software before attempting setup.  
If Belkin Setup still cannot find the Router, you might choose  
to do a manual setup. Refer to “Manually Configuring  
Network Settings” in this manual for details.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
belkin setup cannot connect my Router to the Internet  
belkin setup completed installation, but I cannot browse the  
Web  The light on the front of my Router is blinking amber  
If Belkin Setup is not able to connect the Router to  
the Internet, please check the following items:  
1  Make sure the Router is connected to your modem with an  
Ethernet cable via the Router’s one WAN (modem) port.  
1  Use the troubleshooting suggestions within Belkin Setup.  
2  Unplug the modem from its power source and make sure  
2  If your ISP requires a user name and password, make sure that  
you have typed in your user name and password correctly. Some  
user names require that the ISP’s domain may be at the end of the  
name. Example: “[email protected]”. The “@myisp.com” part of  
the user name may need to be typed as well as your user name.  
that it goes dark. Then reapply power to the modem.  
3  Unplug your Router’s power supply, wait 10 seconds,  
and plug it back in. This will cause the Router to try  
to reestablish communication with the modem.  
3  If you continue to have no Internet connection, refer  
to “Manually Configuring Network Settings” in this  
manual for an alternative setup method.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
belkin setup completed installation, but I cannot browse the  
Web  The light on the front of my Router is solid amber  
I can’t connect to the Internet wirelessly  
If the light on the front of the Router is solid green, then your  
Router is connected to the Internet. You may not be connected  
to the Router’s wireless network. Please refer to “Adding  
Computers to Your Network” in this manual for instructions.  
1  Use the troubleshooting suggestions within Belkin Setup.  
2  If your ISP requires a user name and password, make sure that  
you have typed in your user name and password correctly. Some  
user names require that the ISP’s domain may be at the end of the  
name. Example: “[email protected]”. The “@myisp.com” part of  
the user name may need to be typed as well as your user name.  
3  If you have a static connection, your ISP will have  
assigned you an IP address, subnet mask, and gateway  
address. Please re-run Belkin Setup and enter this  
information when a static connection is mentioned.  
4  You may need to configure your Router to meet  
the specific requirements of your ISP. To search  
our knowledge base for ISP-specific issues, go to:  
http://www.belkin.com/support and type in “ISP”.  
5  If you continue to have no Internet connection, refer  
to “Manually Configuring Network Settings” in this  
manual for an alternative setup method.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
I can’t connect to the Internet wirelessly and my  
My wireless network performance is slow, inconsistent,  
suffers from weak signal, or I’m having difficulty maintaining a  
VPn connection  
network name is not listed in available networks  
1  Verify that your Router is on and the  
front-panel light shows solid green.  
Wireless technology is radio-based, which means connectivity  
and the throughput performance between devices  
2  If you are far from the Router, you might try moving  
decreases when the distance between devices increases.  
Other factors that will cause signal degradation (metal is  
generally the worst culprit) are obstructions such as walls  
and metal appliances. Note also that connection speed may  
decrease as you move farther away from the Router.  
closer to see if you might have been out of range.  
3  Using a computer attached to the Router via a network cable,  
visit http://router/ and ensure that “Broadcast SSID” is ON.  
This setting is found on the “Channel and SSID” page.  
In order to determine if wireless issues are related to  
range, we suggest temporarily moving the computer  
within 10 feet from the Router if possible.  
Changing the wireless channel—Depending on local  
wireless traffic and interference, switching the wireless  
channel of your network can improve performance and  
reliability. See the section titled “Changing the Wireless  
Channel” for instructions on how to choose other channels.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
limiting the wireless transmit rate—Limiting the wireless transmit  
rate can help improve range and connection stability. Most wireless  
cards have the ability to limit the transmission rate. To change this  
property in Windows, go to the Windows Control Panel, open “Network  
Connections”, and double-click on your wireless card’s connection. In  
the properties dialog, select the “Configure” button on the “General”  
tab, then choose the “Advanced” tab and select the rate property.  
I’ve installed this new Router and some of my network clients  
(computers, game consoles, etc ) are now unable to connect  
Your new Router came pre-configured with a network name and  
password, found printed on an attached card. All clients must use this  
network name and password to connect wirelessly to your Router.  
You will need to find the network settings on your client, select the  
network name printed on the card from the list of available networks,  
and enter the password when prompted to join the wireless network.  
Wireless client cards are usually set to automatically adjust  
the wireless transmit rate for you, but doing so can cause  
periodic disconnects when the wireless signal is too weak; as  
a rule, slower transmission rates are more stable. Experiment  
with different connection rates until you find the best one  
for your environment. Note that all available transmission  
rates should be acceptable for browsing the Internet. For  
more assistance, see your wireless card’s user manual.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
Does the Router support Wireless  
5  Click “Apply Changes” to finish. Your wireless  
connection is now encrypted. Each computer using your  
wireless network will need to use the new key.  
Protected access (WPa) security?  
The Router ships with WPA/WPA2 security turned on.  
Windows XP and some older network hardware may  
require a software update to support WPA/WPA2.  
note: If you are configuring the Router over a wireless  
connection, you will have to re-connect to the  
Router after changing any security settings.  
I am having difficulty setting up WPa security on my Router  
note: Some older networking hardware supports  
only WEP encryption. If your older computers cannot  
connect to your network, try 128-bit or 64-bit WEP, or  
seek software updates from their manufacturers.  
1  Log in to your Router by visiting http://router/ with your web browser.  
Click on the “Login” button in the top right-hand corner of the  
screen. You will be asked to enter your password. If you have never  
set a password, leave the “Password” field blank and click “Submit”.  
2  Click “Wireless” in the left-hand menu. Then  
click “Security” just below that.  
3  Select the “WPA/WPA2” option.  
4  Enter a password. This can be from 8–63 characters of your choice,  
including spaces and punctuation, OR a 64-digit hexadecimal  
number (using only the numbers 0–9 and letters A–F).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
I am having difficulty setting up Wired equivalent  
Privacy (WeP) security on my Router  
5  Click “Apply Changes” to finish. Your wireless  
activity is now encrypted. Each computer using your  
wireless network will need to use the new key.  
1  Log in to your Router. Visit http://router/ with your web browser.  
Click on the “Login” button in the top right-hand corner of the  
screen. You will be asked to enter your password. If you have never  
set a password, leave the “Password” field blank and click “Submit”.  
note: If you are configuring the Router over a wireless  
connection, you will have to re-connect to the  
Router after changing any security settings.  
2  Click “Wireless” in the left-hand menu. Then  
note: Some older networking hardware supports  
only 64-bit WEP encryption. If your older computers  
cannot connect to your network, try 64-bit WEP.  
click “Security” just below that.  
3  Select the “128-bit WEP” option.  
4  You may type in a WEP key manually, or generate one from  
a passphrase. Type a phrase in the “Passphrase” field and  
click the “Generate” button. A WEP key is composed of 26  
hexadecimal digits (0–9, A–F . For example, C3 03 0F AF  
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
a disk I plugged into the Usb port is not showing  
up on my computer or in Memory safe  
a printer I plugged into the Usb port is  
not showing up on my computer  
1  Is the light on over the USB port that the disk is plugged into?  
If not, try unplugging and re-plugging the disk. Please check  
that the USB connector is firmly plugged into the Router.  
1  Is the light on over the USB port that the printer is plugged into?  
If not, try unplugging and re-plugging the printer. Please check  
that the USB connector is firmly plugged into the Router.  
2  If your disk has an optional power supply, please use  
2  To print to a printer attached to the Router, your  
computer must have that printer’s driver installed.  
Please check that the driver is installed.  
it while the disk is attached to your Router.  
3  The Router supports FAT16, FAT32-, or NTFS-formatted  
disks. Disks in other formats will not appear in the  
Finder (Mac OS X) or Windows Internet Explorer.  
3  The printer may not be set to auto-connect. Via the Belkin Router  
Manager, open the USB Print and Storage Center. Check that the  
printer appears in the list of available devices. View the properties  
of the printer, and check that “auto-connect” is selected.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
a different sort of Usb device that I plugged into the  
Usb port is not showing up on my computer  
Most USB devices other than disks and printers must be  
accessed via the USB Print and Storage Center.  
1  Is the light on over the USB port that the device is plugged into?  
If not, try unplugging and re-plugging the device. Please check  
that the USB connector is firmly plugged into the Router.  
2  Via the Belkin Router Manager, open the USB  
Print and Storage Center. Check that the device  
appears in the list of available devices.  
3  Select the device and click the “Use” button. The device will be  
virtually connected to your computer until you choose to “Stop  
Using” the device, or another person requests use of the device.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
Technical support  
Us  
Thailand  
0018004413318  
UK  
Philippines  
180014410282  
australia  
Hong Kong  
30021318  
new Zealand  
China  
800 819 0159  
europe  
australia  
1800 235 546  
singapore  
1800 622 1130  
new Zealand  
0800 235 546  
Malaysia  
1 800 812 076  
asia email  
India  
1800-419-5546  
Korea email  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
What is not covered by this warranty?  
belkin International, Inc , limited  
All above warranties are null and void if the Belkin product is  
not provided to Belkin for inspection upon Belkin’s request  
at the sole expense of the purchaser, or if Belkin determines  
that the Belkin product has been improperly installed, altered  
in any way, or tampered with. The Belkin Product Warranty  
does not protect against acts of God such as flood, lightning,  
earthquake, war, vandalism, theft, normal-use wear and tear,  
erosion, depletion, obsolescence, abuse, damage due to low  
voltage disturbances (i.e. brownouts or sags), non-authorized  
program, or system equipment modification or alteration.  
3-Year Product Warranty  
What this warranty covers  
Belkin International, Inc. (“Belkin”) warrants to the original  
purchaser of this Belkin product that the product shall be free  
of defects in design, assembly, material, or workmanship.  
What the period of coverage is  
Belkin warrants the Belkin product for three years.  
What will we do to correct problems?  
Product Warranty.  
Belkin will repair or replace, at its option, any defective product  
free of charge (except for shipping charges for the product).  
Belkin reserves the right to discontinue any of its products without  
notice, and disclaims any limited warranty to repair or replace any  
such discontinued products. In the event that Belkin is unable to  
repair or replace the product (for example, because it has been  
discontinued), Belkin will offer either a refund or a credit toward  
the purchase of another product from Belkin.com in an amount  
equal to the purchase price of the product as evidenced on the  
original purchase receipt as discounted by its natural use.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
How to get service  
Belkin reserves the right to review the damaged Belkin product.  
All costs of shipping the Belkin product to Belkin for inspection  
shall be borne solely by the purchaser. If Belkin determines,  
in its sole discretion, that it is impractical to ship the damaged  
equipment to Belkin, Belkin may designate, in its sole discretion,  
an equipment repair facility to inspect and estimate the cost to  
repair such equipment. The cost, if any, of shipping the equipment  
to and from such repair facility and of such estimate shall be  
borne solely by the purchaser. Damaged equipment must remain  
available for inspection until the claim is finalized. Whenever  
claims are settled, Belkin reserves the right to be subrogated  
under any existing insurance policies the purchaser may have.  
To get service for your Belkin product you  
must take the following steps:  
1  Contact Belkin International, Inc., at 12045 Waterfront  
Drive, Los Angeles, CA 90094, Attn: Customer Service,  
or call (800)-223-5546, within 15 days of the Occurrence.  
Be prepared to provide the following information:  
a. The part number of the Belkin product.  
b. Where you purchased the product.  
c. When you purchased the product.  
d. Copy of original receipt.  
2  Your Belkin Customer Service Representative will then  
instruct you on how to forward your receipt and Belkin  
product and how to proceed with your claim.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUblesHOOTInG, sUPPORT, anD WaRRanTY  
How state law relates to the warranty  
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF  
BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED  
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING  
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE  
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.  
Some states do not allow limitations on how long an implied  
warranty lasts, so the above limitations may not apply to you.  
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,  
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR  
MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO,  
LOST BUSINESS OR PROFITS ARISING OUT OF THE  
SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
This warranty gives you specific legal rights, and you may also have  
other rights, which may vary from state to state. Some states do  
not allow the exclusion or limitation of incidental, consequential,  
or other damages, so the above limitations may not apply to you.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ReGUlaTORY InfORMaTIOn  
fCC statement  
federal Communications Commission notice  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation.  
DeClaRaTIOn Of COnfORMITY WITH fCC RUles  
fOR eleCTROMaGneTIC COMPaTIbIlITY  
We, Belkin International, Inc., of 12045 Waterfront Drive, Los Angeles,  
CA 90094, declare under our sole responsibility that the device, ,  
f7D4302 v1, complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment generates, uses, and can radiate radio frequency  
energy, and if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try and  
correct the interference by one or more of the following measures:  
Caution: exposure to Radio frequency Radiation  
The device shall be used in such a manner that the potential  
for human contact normal operation is minimized  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the receiver.  
This equipment complies with FCC radiation exposure  
limits set forth for an uncontrolled environment. This  
equipment should be installed and operated with a minimum  
distance of 20cm between the radiator and your body.  
Connect the equipment to an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC Caution: Any changes or modifications not expressly  
approved by the party responsible for compliance could  
void the user’s authority to operate this equipment.  
This device and its antenna(s) must not be co-located or  
operating in conjunction with any other antenna or transmitter.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ReGUlaTORY InfORMaTIOn  
Canada-Industry Canada (IC)  
Information  
The wireless radio of this device complies with RSS  
139 & RSS 210 Industry Canada. This Class B digital  
apparatus complies with Canadian ICES-003.  
Products with the CE marking comply with the EMC Directive  
(2004/108/EC) and the Low Voltage Directive (2006/95/  
EC) issued by the Commission of the European Community.  
Compliance with these directives implies conformity to  
the following European Product Family Standards.  
Operation is subject to the following two conditions: (1)  
this device may not cause interference, and (2) this device  
must accept any interference, including interference  
that may cause undesired operation of the device.  
EN 55022 (CISPR 22) – Electromagnetic Interference  
EN 55024-1 – Electromagnetic Immunity  
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics  
EN 61000-3-3 (IEC610000) – Power Line Flicker  
EN 60950-1 (IEC60950-1) – Product Safety  
Cet appareil numérique de la classe B conforme  
á la norme NMB-003 du Canada.  
europe  
Products that contain the radio transmitter are sometimes  
labeled with the Notified Body number (CE0560) or CE  
alert marking if the standard used in the conformity is  
not harmonized across the European Community.  
European Union Radio products with the CE or CE alert  
marking comply with the R&TTE Directive (1999/5/EC)  
issued by the Commission of the European Community.  
Compliance with this directive implies conformity  
to the following European Norms (in brackets are  
the equivalent international standards).  
EN 60950-1:2006 (IEC60950-1) – Product Safety  
EN 300 328 Technical requirement for radio equipment  
ETS 301 489 General EMC requirements for radio equipment.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2010 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of  
respective manufacturers listed. Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the  
U.S. and other countries. Windows, Windows Vista, Internet Explorer, and DirectX are either registered  
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Computer Accessories P35727ec User Manual
Bosch Appliances Cooktop PGP959SET User Manual
Bosch Appliances Washer Dryer WFL 2090 User Manual
Braun Coffee Grinder KF 520 User Manual
Briggs Stratton Motorized Awning 253400 User Manual
Britax Car Seat 85 SICT User Manual
Bushnell Binoculars 18 0833 User Manual
Casio Calculator MS300M User Manual
Casio Watch MA0910 EA User Manual
Chicago Electric Crib 47641 User Manual