Belkin Network Card RK4000 User Manual

RK4000 INSTRUCTIONS  
RK4000 Product Inventory  
Corner Post (4)  
3/8"-16 x 1 Hex Head Bolt (16)  
3/8" Split Lock Washer (16)  
Nut Plate (8)  
Top/Bottom Panel (2)  
1/4"-20 Hex Nut (8)  
M6 Screws (50)  
M6 Cage Nuts (50)  
Instructions  
1. Take two of the U-Shaped mounting rails and place them on the floor, such that the RMU markings are facing  
in opposite directions.  
2. Make sure that the RMU markings start with “1” at the same end.  
3. Take the bottom panel (the one without the Belkin logo) and then insert the side of the two mounting rails onto  
the bottom panel. Repeat with top panel.  
4. Align the bolt holes and place nut plate on inside of mounting rail, start 3/8" bolt with lock washer (2 times).  
Repeat with top panel. (Hand tighten). See Detail A.  
5. Turn the rack over and repeat step 4. Make sure your U markings match on all uprights.  
A
3/8”-16 x1  
Hex Head Bolt  
Nut Plate  
Detail A  
3/8” Split  
Lock Washer  
Belkin Corporation  
501 West Walnut Street  
Compton, CA 90220-5221, USA  
Tel: 310-898-1100; Fax: 310-898-1111  
© 2005 Belkin Corporation. All rights reserved.  
All trade names are registered trademarks of respective manufacturers listed.  
RK4000 Instructions  
Page 1  
P35779  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Decker Cordless Drill 605654 00 User Manual
Bodum Charcoal Grill 11344 User Manual
Broan Ventilation Hood QL1 Series User Manual
Bushnell Hunting Equipment 202355 User Manual
Cable Electronics Switch HS103 User Manual
Cal Flame Gas Grill Barbecue Island User Manual
Cal Flame Gas Grill Barbeque Grill User Manual
Campbell Hausfeld Staple Gun CHN10302 User Manual
Chevrolet Automobile 1994 lumina User Manual
Chief Manufacturing Indoor Furnishings XSM Series User Manual