Belkin Headphones F8V9017 User Manual

Bluetooth™  
Hands-Free Headset  
Experience the freedom of wireless communication  
For use with mobile  
User Manual  
phones enabled with  
Bluetoothtechnology.  
F8V9017  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information for Safe Use  
Note: Read this information before using the Bluetooth Hands-Free Headset.  
To avoid the risk of product malfunction, product damage, or personal injury, take care to  
observe these safety precautions and always use the Bluetooth Hands-Free Headset  
according to the instructions for use.  
Headset Care  
• Never expose to liquid or immerse in water, avoid excessive humidity.  
• Do not attempt to disassemble the Headset; it contains no user-serviceable parts. The  
rechargeable battery is pre-installed and ready for use.  
• Do not drop or throw the Headset and protect it from environments that could  
scratch it. Use only a soft cloth to clean it.  
• Do not expose the Headset to extremes of temperature.  
• Never expose the Headset to open flames and do not dispose of in a fire.  
• Do not allow children to play with the Headset. It contains small parts that could  
detach to create a choking hazard.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information for Safe Use (continued)  
Driving  
• Check the regulations affecting the use of hands-free devices where you drive. Only  
use the Headset when and where it is safe to do so.  
Operation in Special Environments  
• Medical equipment and hospitals: Due to the risk of interference with medical  
equipment, do not use the Headset or a mobile phone nearby without permission.  
• Aircraft: To avoid interference with communication systems, turn the Headset OFF  
when required to do so by airline regulations. Never use the Headset while in the air.  
• If you are unsure if radio-transmitting equipment is allowed in any area, seek  
authorization before turning the Headset ON.  
Charging  
• Only use the charger supplied with the Headset to charge the product to avoid risk of  
damage or personal injury.  
• The charger can only be disconnected by unplugging, so it is recommended to only  
use a power socket easily accessible.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information for Safe Use (continued)  
Charging (continued)  
• Ensure the charger is compatible with the AC supply available before attempting to  
plug it in.  
• The charger is for indoor use only. Never expose to liquid or immerse in water, avoid  
excessive humidity.  
Environmental Care  
• Please observe local regulations regarding the disposal of your packaging materials  
and the product itself. Where possible, promote their recycling.  
• This product contains a rechargeable NiMH battery.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Description  
The Bluetooth Hands-Free Headset (Headset) is a complete audio headset supporting  
the Bluetooth headset profile. The Headset is a convenient personal device providing 2-  
way wireless audio connectivity to other Bluetooth devices such as mobile phones,  
PDAs, and PCs.  
The use of the Bluetooth short-range wireless standard ensures interoperation with a  
wide range of other Bluetooth products.  
Features  
• Bluetooth v1.1-compliant with headset profile  
• Boomless design for comfortable unobtrusive use  
• Optimized acoustic design  
• Easy-to-operate user interface  
• Long talk and standby time  
• Rechargeable  
• Lightweight  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation Modes  
Operation Modes  
PIN Code: Keep the 4-digit PIN code information supplied with the Headset in a safe  
place. It is unique to your Headset. It will be needed for pairing.  
The Headset supports these modes of operation:  
• OFF—the Headset is off and cannot receive or make a connection.  
• STANDBY—the Headset is ready to receive or make a connection from a paired device  
within range.  
• INCOMING CALL—the Headset is ready to answer a call being received.  
• TALK—the Headset is actively connected to another device and communication can  
be made, after answering or initiating a call.  
• PAIRING—this is a special mode used to “pair” the Headset ready for use with a  
companion device such as a mobile phone.  
• CHARGING—the Headset can be charged by connecting the charger supplied.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Functions  
LED indicator  
Keypad  
Volume +  
• One push button to switch the  
Headset on/off, to select PAIRING  
mode, or to initiate or answer a call  
Main  
multifunction  
button  
• Two switches to control  
receive-volume  
Volume -  
Microphone  
Charging connector  
Shown configured for wearing on the right ear.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Functions (continued)  
Key Press  
Key Press  
Effect in Current Mode  
OFF  
PAIRING  
STANDBY  
INCOMING  
TALK  
CALL  
Short  
Exit PAIRING  
mode and go  
to STANDBY  
Initiate a  
call  
Answer a call  
End current  
call  
(more than  
0.5 sec.  
and less  
than 3  
(Not possible  
when  
microphone  
is muted)  
sec.)  
Medium  
(3–10  
sec.)  
Switch on  
and go into  
STANDBY  
mode  
Exit PAIRING  
mode, reset  
PAIRING  
Switch OFF  
Headset  
Switch OFF  
Headset  
Mute and  
un-mute the  
microphone  
data and  
switch OFF  
Long  
(more than  
10 sec.)  
Switch on  
and go into  
PAIRING  
mode  
Mute and  
un-mute the  
microphone  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Functions (continued)  
Volume Buttons  
These buttons allow the user to select a receive-volume from eight levels. A short press  
is used to increase or decrease volume one step. If the key is kept pressed, the volume  
is increased or decreased until it is released. A short tone indicates the current  
volume level.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Functions (continued)  
LED Indicator  
A red/green LED is used to indicate various functions.  
LED Color  
Effect in Current Mode  
Steady ON  
Alternate  
Blinking  
Slow  
Fast  
Flashing  
Fast  
Steady  
OFF  
Flashing  
Flashing  
with 2  
Blinks  
Red  
Switched  
OFF and on  
charge,  
STANDBY  
mode and  
battery low  
TALK or  
TALK and  
muted and  
battery low  
INCOMING  
CALL and  
battery low  
OFF mode  
battery low  
Green  
Switched  
OFF and on  
charge,  
STANDBY  
mode and  
battery high  
TALK or  
INCOMING  
CALL and  
battery high  
TALK and  
muted and  
battery high  
battery low  
Red and  
Green  
PAIRING  
mode  
Note: When on charge with the Headset not switched OFF, the LED flashing sequence is  
not changed, but the LED color will change from red to green as the battery reaches  
full charge.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Functions (continued)  
Sounds  
In order to make operation easier, the Headset generates several sounds:  
Switch-on tone  
Switch-off tone  
Pairing tone  
Error tone  
Alert tone  
Mute tone  
Ring tone  
Reset tone  
Confirmation tone  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Operation  
Refer to the “Important Information for Safe Use” section above for important safety  
information before use.  
Charging Before First Use  
The Headset will not be fully charged when it is unpacked. It is recommended to  
place it on charge for five hours before first use; the charging section describes how  
to do this.  
Wearing the Headset  
• The Headset can be worn on either ear, by changing the orientation of the ear hook.  
• To remove the ear hook, carefully lever it from the back of the Headset by hand.  
• The ear hook can be replaced either way up. Note the indentation in the center to  
properly orient the ear hook on the Headset.  
• With the user controls facing the user and the LED at the top, the closed loop of the  
ear hook should “point” right for operation on the right ear, and left for the left ear.  
• To place on the ear, hold the Headset in the hand and push the open end of the  
hook slightly away from the Headset body.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
• Slide the open end of the ear hook onto the ear from the front. It will tend to lock in  
position with a slight twisting motion.  
• The ear hook is malleable for further slight adjustment.  
Switching On  
1. Press the main button until a short tone is heard in the earpiece.  
2. Release the button. The Headset will generate the switch-on melody in the earpiece.  
3. The LED will flash the signal to indicate the Headset is now in STANDBY mode ready  
to be paired, or if already paired, ready to make or receive a call.  
Switching Off  
1. Press the main button until a short tone is heard in the earpiece.  
2. Release the button. The Headset will generate the switch-off melody.  
3. The LED will stop flashing.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
Preparing the Headset for Use—Pairing  
PIN Code: The PIN code for the Headset is preset to 1234. It will be needed for pairing.  
Before the Headset can communicate, it must be paired to the companion device it will  
be used with, such as a mobile phone. This is to ensure the Headset only communicates  
with the device chosen by the user and not any other Bluetooth devices in range.  
Pairing information is stored by the Headset and can be changed at any time.  
The exact process to pair the Headset will also depend on the device it is paired with.  
The user manual for that device will give instructions on how to do this. In all cases,  
the Headset will need to be put into PAIRING mode, which is described here:  
1. If the Headset is on, switch it off.  
2. Press and hold the main button.  
3. When the short tone is heard, keep the button pressed until the pairing melody  
is generated.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
4. The LED will alternately flash red/green.  
5. Follow instructions for the companion device to pair to the Headset.  
6. When prompted on the companion device, enter the PIN code for the Headset.  
7. When paired, the Headset will give a short confirmation tone and switch to STANDBY,  
ready for operation.  
Receiving and Ending a Call  
• To receive a call, the Headset must be in STANDBY mode.  
• When a call is received, the Headset will generate a ringing signal in the earpiece.  
• The call may be answered by a short press of the main button.  
• The connection will be made to the companion device, and in the case of a mobile  
phone, the call will be answered.  
• During a call, when in TALK mode, the microphone may be muted and un-muted by a  
medium press of the main button.  
• A short press of the main button will end a call.  
• If the Headset is muted, it is necessary to un-mute with a medium button press  
before ending the call. This avoids accidentally ending a call when trying to un-mute.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
Initiating a Call  
• When in STANDBY mode, a short press will initiate a connection to the  
companion device.  
• For example, this could be used to initiate a call with a mobile phone.  
• During a call, when in TALK mode, the microphone may be muted and un-muted  
by a medium press of the main button.  
• A short press of the main button will end a call.  
• If the Headset is muted, it is necessary to un-mute with a medium button press  
before ending the call. This avoids accidentally ending a call when trying to un-mute.  
Operation—In and Out of Range  
The Headset is designed for use within a few meters of the companion device, typically  
a range of up to 10 meters can be expected. When approaching the limit of usable  
range, short breaks may be heard in the audio.  
If the Headset moves out of range during a call, the connection will be terminated and  
the Headset will return to STANDBY mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
Battery Status  
The LED will flash in TALK, muted, and STANDBY mode. When the battery has adequate  
charge, this will be with a green color, changing to red when the battery is low.  
Charging  
The Headset is supplied with a charger to recharge the internal battery. Do not attempt  
to use any other charger and refer to the “Important Information for Safe Use” section  
above for important safety information.  
• To charge, plug the charger into an available AC supply socket and plug the small  
connector on the charging lead into the matching socket near the microphone.  
• The Headset is normally charged in OFF or STANDBY modes. Charging is not active in  
TALK mode.  
• With the Headset turned OFF, the LED will show a steady red indication until the  
Headset is charged.  
• If the Headset is in any other mode when connected to the charger, the LED flashing  
sequence does not change, but the LED color will indicate the charge status.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
• Sometimes, when the Headset is placed on charge with the LED still showing a green  
color, the LED color may change initially from green to red. This is normal and  
indicates the Headset is not yet fully charged immediately after connecting the  
charger.  
• The charge time is approximately five hours from discharged to fully charged.  
Troubleshooting—Product Reset  
• If the Headset stops operating, first ensure it is charged by charging it for  
five hours.  
• If the Headset remains non-functional, it may be reset by the following method:  
Press and hold the volume-down button, and at the same time, plug in the charger  
as though to place the unit on charge.  
• The Headset will reset itself and be left in OFF mode.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix – A  
Regulatory Notices  
To identify this product, refer to the part or model number on the product label.  
For customer support and for regulatory issues, contact Belkin at 1-800-2BELKIN.  
Federal Communications Commission Notices  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of the  
following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix – A  
• Consult the dealer or an experienced radio/TV technician for help.  
We, Belkin Components, of 501 West Walnut Street, Compton, CA 90220, declare under  
our sole responsibility that the product,  
F8V9017  
to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Modifications  
The FCC requires the user to be notified that any changes or modifications made to this  
device that are not expressly approved by the manufacturer may void the user’s  
authority to operate the equipment.  
Canada- Industry Canada (IC)  
The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.  
This Class B digital complies with Canadian ICES-003.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix – A  
European Community Notice  
Hereby, Belkin Corporation declares that this Bluetooth Hands-Free Headset is in  
compliance with the essential requirements and other relevant provisions of Directive  
1999/5/EC.  
Products bearing the CE marking comply with the R&TTE Directive (1999/5/EC), EMC  
Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the  
commission of the European Community Compliance with these directives implies  
conformity to the following European Norms (in parentheses are the equivalent  
international standards and regulations):  
• EN 60950 (IEC60950) – Product Safety  
• ETS 300 328 – Technical requirements for radio equipment  
• EN 301 489-17 – General EMC requirements for radio equipment  
This product may be used in all EU and EFTA countries.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix – A  
Wireless Notice  
In some situations or environments, the use of wireless devices may be restricted. Such  
restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous  
locations, etc. If you are uncertain of the policy that applies to the use of this device,  
please ask for authorization to use it prior to turning it on.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
belkin.com  
Belkin Components  
501 West Walnut Street  
Compton • CA • 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
Belkin Components, Ltd.  
Express Business Park  
Shipton Way • Rushden • NN10 6GL  
United Kingdom  
Tel: +44 (0) 1933 35 2000  
Fax: +44 (0) 1933 31 2000  
Belkin Components B.V.  
Starparc Building • Boeing Avenue 333  
1119 PH Schiphol-Rijk • The Netherlands  
Tel: +31 (0) 20 654 7300  
Fax: +31 (0) 20 654 7349  
Belkin Components, Ltd.  
7 Bowen Cresent • West Gosford  
NSW 2250 • Australia  
Tel: +61 (0) 2 4372 8600  
Fax: +61 (0) 2 4325 4277  
Tech Support  
US: 310.898.1100 ext. 2263  
800.223.5546 ext. 2263  
310.604.2089 (fax)  
Europe: 00 800 223 55 460  
© 2002 Belkin Components. All rights reserved.  
All trade names are registered trademarks of respective manufacturers listed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Decker Coffeemaker GT300 User Manual
Blue Rhino Patio Heater 92000 User Manual
Bosch Appliances Marine Radio D9112 User Manual
Bostitch Air Compressor BTFP01012 User Manual
BOXLIGHT Projector cp 305t User Manual
Campbell Hausfeld Air Compressor HL5403 User Manual
Canon Printer 4103B022 User Manual
Carson Car Amplifier 1012 User Manual
Carson Car Amplifier SA 430 17 User Manual
Casio Watch MA0604 EB User Manual