Beko Washer WMP632B User Manual

WMP632 B

Washing Machine

User's Manual

Document Number

2820523559/ 04-06-13.(8:03)

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

5.8 Spin speed selection. . . . . . . . . . . . . . . . . .22

5.9 Programme and consumption table. . . . . . .23

5.10 Auxiliary function selection . . . . . . . . . . . .25

5.11 Starting the programme . . . . . . . . . . . . . .26

5.12 Child Lock . . . . . . . . . . . . . . . . . . . . . . . .26

5.13 Progress of programme . . . . . . . . . . . . . .27

5.14 Loading door lock. . . . . . . . . . . . . . . . . . .27

5.15 Changing the selections after programme

has started . . . . . . . . . . . . . . . . . . . . . . .27

5.16 Canceling the programme. . . . . . . . . . . . .28

5.17 End of programme . . . . . . . . . . . . . . . . . .28

5.18 Your machine is equipped with a “Standby

Mode”. . . . . . . . . . . . . . . . . . . . . . . . . . .28

1 Important instructions for safety and

environment

1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4

1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .4

1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .5

1.4 Package information. . . . . . . . . . . . . . . . . . .5

1.5 Disposing of the waste product . . . . . . . . . . .5

1.6 Compliance with WEEE Directive . . . . . . . . . .5

2 Your washing machine

2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.2 Package Contents . . . . . . . . . . . . . . . . . . . .7

2.3 Technical specifications . . . . . . . . . . . . . . . .8

6 Quick User Guide

3 Installation

6.1 Preparing the machine . . . . . . . . . . . . . . . .29

6.2 Programme selection . . . . . . . . . . . . . . . . .29

6.3 Auxiliary function selection . . . . . . . . . . . . .29

6.4 Starting the programme . . . . . . . . . . . . . . .29

6.5 End of programme . . . . . . . . . . . . . . . . . . .29

6.6 Cancelling the programme . . . . . . . . . . . . .29

6.7 Child Lock . . . . . . . . . . . . . . . . . . . . . . . . .29

3.1 Appropriate installation location. . . . . . . . . . .9

3.2 Removing packaging reinforcement . . . . . . .9

3.3 Removing the transportation locks. . . . . . . . .9

3.4 Connecting water supply. . . . . . . . . . . . . . .10

3.5 Connecting to the drain. . . . . . . . . . . . . . . .10

3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . . .11

3.7 Electrical connection. . . . . . . . . . . . . . . . . .12

7 Maintenance and cleaning

4 Preparation

7.1 Cleaning the detergent drawer . . . . . . . . . .30

7.2 Cleaning the loading door and the drum . . .30

7.3 Cleaning the body and control panel . . . . . .31

7.4 Cleaning the water intake filters . . . . . . . . .31

7.5 Draining remaining water and cleaning the

pump filter. . . . . . . . . . . . . . . . . . . . . . . .31

4.1 Sorting the laundry. . . . . . . . . . . . . . . . . . .14

4.2 Preparing laundry for washing. . . . . . . . . . .15

4.3 Things to be done for energy saving . . . . . .15

4.4 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . .15

4.5 Correct load capacity . . . . . . . . . . . . . . . . .16

4.6 Loading the laundry . . . . . . . . . . . . . . . . . .16

4.7 Using detergent and softener . . . . . . . . . . .16

4.8 Tips for efficient washing . . . . . . . . . . . . . .19

8 Troubleshooting

5 Operating the product

5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .20

5.2 Preparing the machine . . . . . . . . . . . . . . . .20

5.3 Programme selection . . . . . . . . . . . . . . . . .20

5.4 Main programmes . . . . . . . . . . . . . . . . . . .21

5.5 Additional programmes . . . . . . . . . . . . . . .21

5.6 Special programmes. . . . . . . . . . . . . . . . . .22

5.7 Temperature selection. . . . . . . . . . . . . . . . .22

Download from Www.Somanuals.com. All Manuals Search And Download.

3 / EN

1 Important instructions for safety and environment

This section contains safety instructions that

will help protect from risk of personal injury

or property damage. Failure to follow these

instructions shall void any warranty.

• Do not force open the locked loading door. The

loading door will be ready to open just a few

minutes after the washing cycle comes to an

end. In case of forcing the loading door to open,

the door and the lock mechanism may get

damaged.

1.1 General safety

• This product can be used by children at and

above 8 years old and by persons whose

physical, sensory or mental capabilities were

not fully developed or who lack experience and

knowledge provided that they are supervised

or trained on the safe usage of the product and

the risks it brings out. Children must not play

with the product. Cleaning and maintenance

works should not be performed by children

unless they are supervised by someone.

• Never place the product on a carpet-covered

floor. Otherwise, lack of airflow beneath the

machine will cause electrical parts to overheat.

This will cause problems with your product.

• If the product has a failure, it should not be

operated unless it is repaired by the Authorized

Service Agent. There is the risk of electric

shock!

• Unplug the product when not in use.

• Never wash the product by spreading or pouring

water onto it! There is the risk of electric shock!

• Never touch the plug with wet hands! Never

unplug by pulling on the cable, always pull out

by grabbing the plug.

• Use detergents, softeners and supplements

suitable for automatic washing machines only.

• Follow the instructions on the textile tags and

on the detergent package.

• The product must be unplugged during

installation, maintenance, cleaning and

repairing procedures.

• Always have the installation and repairing

procedures carried out by the Authorized

Service Agent. Manufacturer shall not be

held liable for damages that may arise from

procedures carried out by unauthorized

persons.

• This product is designed to resume operating

in the event of powering on after a power

interruption. If you wish to cancel the

programme, see "Cancelling the programme"

section.

• If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent

or similary qualified persons in order to avoid a

hazard.

• Connect the product to a grounded outlet

protected by a 13 A fuse. Do not neglect to

have the grounding installation made by a

qualified electrician. Our company shall not

be liable for any damages that will arise when

the product is used without grounding in

accordance with the local regulations.

• The water supply and draining hoses must be

securely fastened and remain undamaged.

Otherwise, there is the risk of water leakage.

• Never open the loading door or remove the filter

while there is still water in the drum. Otherwise,

risk of flooding and injury from hot water will

occur.

• If the power cable is damaged, it must be

replaced by the manufacturer, after sales

service or a similarly qualified person

(preferably an electrician) or someone

designated by the importer in order to avoid

possible risks.

1.2 Intended use

• This product has been designed for domestic

use. It is not suitable for commercial use and it

must not be used out of its intended use.

• The product must only be used for washing and

rinsing of laundry that are marked accordingly.

• The manufacturer waives any responsibility

arisen from incorrect usage or transportation.

• The service life of your product is 10 years.

During this period, original spare parts will be

available to operate the appliance properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

4 / EN

Important instructions for safety and environment

1.3 Children's safety

1.6 Compliance with WEEE Directive

• Packaging materials are dangerous to children.

Keep packaging materials in a safe place away

from reach of the children.

This product complies with EU WEEE

Directive (2012/19/EU). This product

bears a classification symbol for waste

• Electrical products are dangerous for the

children. Keep children away from the product

when it is in use. Do not let them to tamper with

the product. Use child lock to prevent children

from intervening with the product.

• Do not forget to close the loading door when

leaving the room where the product is located.

• Store all detergents and additives in a safe

place away from the reach of the children by

closing the cover of the detergent container or

sealing the detergent package.

electrical and electronic equipment

(WEEE).

This product has been manufactured with high

quality parts and materials which can be reused

and are suitable for recycling. Do not dispose of

the waste product with normal domestic and other

wastes at the end of its service life. Take it to the

collection center for the recycling of electrical and

electronic equipment. Please consult your local

authorities to learn about these collection centers.

1.4 Package information

• Packaging materials of the product are

manufactured from recyclable materials in

accordance with our National Environment

Regulations. Do not dispose of the packaging

materials together with the domestic or other

wastes. Take them to the packaging material

collection points designated by the local

authorities.

1.5 Disposing of the waste product

• This product has been manufactured with high

quality parts and materials which can be reused

and are suitable for recycling. Therefore, do

not dispose the product with normal domestic

waste at the end of its service life. Take it to a

collection point for the recycling of electrical

and electronic equipment. Please consult your

local authorities to learn the nearest collection

point. Help protect the environment and natural

resources by recycling used products. For

children's safety, cut the power cable and break

the locking mechanism of the loading door so

that it will be non-functional before disposing of

the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

5 / EN

2 Your washing machine

2.1 Overview

1- Power cable

2- Top panel

3- Control panel

4- Filter cap

5- Adjustable feet

6- Loading door

7- Detergent drawer

8- Drain hose

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

6 / EN

Your washing machine

2.2 Package Contents

1- Power cable

2- Drain hose

3- Transportation safety bolts *

4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.)

a- Electronical water shut-off

a- Mechanical water shut-off

c- Standard

5- Liquid detergent container**

6- User Manual

7- Blind plug***

8- Plastic plug group

* Number of transportation safety bolts may change depending on the model of your machine.

** This may be supplied with the machine depending on the model of your machine.

*** This is supplied if your machine is equipped with double water inlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

7 / EN

Your washing machine

2.3 Technical specifications

Models (EN)

WMP632B

Maximum dry laundry capacity (kg)

Height (cm)

Width (cm)

Depth (cm)

Net weight ( 4 kg.)

Electrical input (V/Hz)

Total current (A)

230 V / 50Hz

2200

1300

1.00

0.25

9210

• / -

Total power (W)

Spin speed (rpm/ min., max.)

Stand-by mode power (W)

Off-mode power (W)

Main model code

Single Water inlet / Double Water inlet

• Available

Technical specifications may be changed without prior notice to improve the quality of the product.

Figures in this manual are schematic and may not match the product exactly.

Values stated on the product labels or in the documentation accompanying it are obtained in laboratory

conditions in accordance with the relevant standards. Depending on operational and environmental

conditions of the product, these values may vary.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

8 / EN

3 Installation

Refer to the nearest Authorised Service Agent for

installation of the product. To make the product

ready for use, review the information in the user

manual and make sure that the electricity, tap

water supply and water drainage systems are

appropriate before calling the Authorized Service

Agent. If they are not, call a qualified technician

and plumber to have any necessary arrangements

carried out.

3.2 Removing packaging

reinforcement

Tilt the machine backwards to remove the

packaging reinforcement. Remove the packaging

reinforcement by pulling the ribbon.

Preparation of the location and electrical,

tap water and waste water installations

at the place of installation is under

customer's responsibility.

WARNING: Installation and electrical

connections of the product must be

B_{carried out by the Authorized Service}

Agent. Manufacturer shall not be held

liable for damages that may arise from

procedures carried out by unauthorized

persons.

3.3 Removing the

transportation locks

WARNING: Prior to installation, visually

check if the product has any defects on

A_{it. If so, do not have it installed. Damaged}

WARNING: Do not remove the

transportation locks before taking out the

A_{packaging reinforcement.}

products cause risks for your safety.

WARNING: Remove the transportation

safety bolts before operating the washing

Make sure that the water inlet and

discharge hoses as well as the power

A_{machine! Otherwise, the product will be}

1.Loosen all the bolts with a suitable spanner until

cable are not folded, pinched or crushed

while pushing the product into its place

after installation or cleaning procedures.

damaged.

they rotate freely (C).

3.1 Appropriate installation location

• Place the machine on a rigid floor. Do not place

it on a long pile rug or similar surfaces.

• Total weight of the washing machine and the

dryer -with full load- when they are placed

on top of each other reaches to approx. 180

kilograms. Place the product on a solid and flat

floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product at places where

temperature may fall below 0ºC.

2.Remove transportation safety bolts by turning

them gently.

• Place the product at least 1 cm away from the

edges of other furniture.

3.Attach the plastic covers supplied in the User

Manual bag into the holes on the rear panel. (P)

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

9 / EN

Installation

WARNING: Ensure that the cold and hot

water connections are made correctly when

A_{installing the product. Otherwise, your}

laundry will come out hot at the end of the

washing process and wear out.

2.Tighten all hose nuts by hand. Never use a tool

when tightening the nuts.

Keep the transportation safety bolts in

a safe place to reuse when the washing

machine needs to be moved again in the

future.

Never move the product without the

transportation safety bolts properly fixed

in place!

3.4 Connecting water supply

The water supply pressure required to run

3.Open the taps completely after making the

hose connection to check for water leaks at

the connection points. If any leaks occur, turn

off the tap and remove the nut. Retighten the

nut carefully after checking the seal. To prevent

water leakages and damages caused by them,

keep the taps closed when the machine is not

in use.

the product is between 1 to 10 bars (0.1

– 1 MPa). It is necessary to have 10 – 80

liters of water flowing from the fully open

tap in one minute to have your machine run

smoothly. Attach a pressure reducing valve

if water pressure is higher.

If you are going to use the double water-

inlet product as a single (cold) water-inlet

unit, you must install the supplied stopper

to the hot water valve before operating the

product. (Applies for the products supplied

with a blind stopper group.)

3.5 Connecting to the drain

• The end of the drain hose must be directly

connected to the wastewater drain or to the

washbasin.

• Drain hose shall be attached to a wall drain,

stand pipe or sink siphon connected to the foul

water drain, do not connect to surface water

drains.

WARNING: Models with a single water

inlet should not be connected to the hot

A_{water tap. In such a case the laundry will}

get damaged or the product will switch to

protection mode and will not operate.

WARNING: Do not use old or used water

inlet hoses on the new product. It may

A_{cause stains on your laundry.}

1.Connect the special hoses supplied with the

product to the water inlets on the product. Red

hose (left) (max. 90 ºC) is for hot water inlet,

blue hose (right) (max. 25 ºC) is for cold water

inlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

10 / EN

Installation

• The end of the hose should not be bent, it

should not be stepped on and the hose must

not be pinched between the drain and the

machine.

• If the length of the hose is too short, use it by

adding an original extension hose. Length of the

hose may not be longer than 3.2 m. To avoid

water leak failures, the connection between

the extension hose and the drain hose of the

product must be fitted well with an appropriate

clamp as not to come off and leak.

WARNING: Your house will be flooded

if the hose comes out of its housing

A_{during water discharge. Moreover, there}

is risk of scalding due to high washing

temperatures! To prevent such situations

and to ensure smooth water intake and

discharge of the machine, fix the end

of the discharge hose tightly so that it

cannot come out.

• The hose should be attached to a height of at

least 40 cm, and 100 cm at most.

• In case the hose is elevated after laying it on

the floor level or close to the ground (less than

40 cm above the ground), water discharge

becomes more difficult and the laundry may

come out excessively wet. Therefore, follow the

heights described in the figure.

3.6 Adjusting the feet

WARNING: In order to ensure that

the product operates more silently and

A_{vibration-free, it must stand level and}

balanced on its feet. Balance the machine

by adjusting the feet. Otherwise, the

product may move from its place and

cause crushing and vibration problems.

• To prevent flowing of dirty water back into the

machine and to allow for easy discharge, do not

immerse the hose end into the dirty water or do

not drive it in the drain more than 15 cm. If it is

too long, cut it short.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level

and balanced.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

11 / EN

Installation

electricity supply.

We recommend that this appliance be connected

to the mains supply via a suitable switched and

fused socket in a readily accessible position.

Should the mains lead of the appliance become

damaged or need replacing at any time, it must be

replaced by a special purpose made mains lead

which can only be obtained from a Authorised

Service Agent.

3.Tighten all lock nuts again by hand.

WARNING: This appliance must be

earthed

If the fitted moulded plug is not suitable for your

socket, then the plug should be cut off and an

appropriate plug fitted.

WARNING: Do not use any tools to

loosen the lock nuts. Otherwise, they will

A_{get damaged.}

Destroy the old plug, which is cut off as a plug

with a bared cord could cause a shock hazard if

inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a

13A fuse. Should the fuse need to be replaced an

ASTA approved BS1362 fuse of the same rating

must be used. Do not forget to refit the fuse cover.

In the event of losing the fuse cover, the plug must

not be used until a replacement fuse cover has

been fitted. Colour of the replacement fuse cover

must be the same colour as that visible on the pin

face of the plug. Fuse covers are available from

any good electrical store.

3.7 Electrical connection

Connect the product to a grounded outlet

protected by a 13 A fuse. Our company shall not

be liable for any damages that will arise when the

product is used without grounding in accordance

with the local regulations.

• Connection must comply with national

regulations.

• Power cable plug must be within easy reach

after installation.

• If the current value of the fuse or breaker in the

house is less than 13 Amps, have a qualified

electrician install a 13 Amp fuse.

• The voltage specified in the "Technical

specifications" section must be equal to your

mains voltage.

• Do not make connections via extension cables

or multi-plugs.

Important

Fitting a different plug

As the colours of the wires in the mains lead

of this appliance may not correspond with the

coloured markings identifying the terminals on

your plug, proceed as follows:

WARNING: Damaged power cables

must be replaced by the Authorized

B_{Service Agents.}

1 Connect the green - yellow or green (earth) wire

to the terminal in the plug marked ‘E’ or with

the symbol f or coloured green and yellow or

green.

2 Connect the blue (neutral) wire to the terminal

in the plug marked ‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in

the plug marked ‘L’ or coloured red.

Electrical requirements

Before you insert the plug into the wall socket

make sure that the voltage and the frequency

shown in the rating label corresponds to your

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

12 / EN

Installation

With the alternative plugs a 13A fuse must be fitted

either in the plug or adaptor or in the main fuse box. If

in doubt contact a qualified electrician.

Transportation of the product

1.Unplug the product before transporting it.

2.Remove water drain and water supply

connections.

3.Drain all water that has remained in the

product. See 7.5

4.Install transportation safety bolts in the reverse

order of removal procedure; see 3.3.

Never move the product without the

transportation safety bolts properly fixed

in place!

A_{materials in a safe place away from}

WARNING: Packaging materials are

dangerous to children. Keep packaging

reach of the children.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

13 / EN

4 Preparation

4.1 Sorting the laundry

• Sort laundry according to type of fabric, colour,

and degree of soiling and allowable water

temperature.

• Always obey the instructions given on the

garment tags.

LAUNDRY WASH SYMBOLS

Machine

Wash

Symbols

WASH

95⁰C

70⁰C

60⁰C

50⁰C 40⁰C

30⁰C

Maximum

Symbol(s)

Water

Temperatures

lll

l l

lll

Drying

Symbols

Suitable for

dryer

No Iron

Do not dry-

clean

Sensitive /

Delicate dry

Do not dry

with dryer

Do not dry

DRYING

Drying

Settings

Iron -

Iron at high

temperature

Iron at medium

temperature

Iron at low

temperature

Dry or Steam

IRON

200 ⁰C

150 ⁰C

110 ⁰C

Maximum temperature

Bleach (sodium

hypochlorite)

can be used

Bleach is not

allowed

Only bleaches without

chlorine are allowed

All bleaches are allowed

BLEACH

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

14 / EN

Preparation

but do not overload; see, "Programme and

consumption table".

• Always follow the instructions on the detergent

packaging.

• Wash slightly soiled laundry at low

temperatures.

• Use faster programmes for small quantities of

lightly soiled laundry.

• Do not use prewash and high temperatures for

laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select

the highest spin speed recommended during

washing process.

• Do not use detergent in excess of the amount

recommended on the detergent package.

4.2 Preparing laundry for washing

• Laundry items with metal attachments such as,

underwired bras, belt buckles or metal buttons

will damage the machine. Remove the metal

pieces or wash the clothes by putting them in a

laundry bag or pillow case.

• Take out all substances in the pockets such as

coins, pens and paper clips, and turn pockets

inside out and brush. Such objects may damage

the product or cause noise problem.

• Put small size clothes such as infant's socks

and nylon stockings in a laundry bag or pillow

case.

• Place curtains in without compressing them.

Remove curtain attachment items.

• Fasten zippers, sew loose buttons and mend

rips and tears.

• Wash “machine washable” or “hand washable”

labeled products only with an appropriate

programme.

• Do not wash colours and whites together. New,

dark coloured cottons release a lot of dye. Wash

them separately.

• Tough stains must be treated properly before

washing. If unsure, check with a dry cleaner.

• Use only dyes/colour changers and limescale

removers suitable for machine wash. Always

follow the instructions on the package.

• Wash trousers and delicate laundry turned

inside out.

4.4 Initial use

Before starting to use the product, make sure

that all preparations are made in accordance

with the instructions in sections “Important safety

instructions” and “Installation”.

To prepare the product for washing laundry,

perform first operation in Drum Cleaning

programme. If your product is not equipped with

Drum Cleaning programme, perform the Initial

Use procedure in accordance with the methods

described under “7.2 Cleaning the loading door

and the drum” section of the user manual.

• Keep laundry items made of Angora wool in the

freezer for a few hours before washing. This will

reduce pilling.

• Laundry that are subjected to materials such as

flour, lime dust, milk powder, etc. intensely must

be shaken off before placing into the machine.

Such dusts and powders on the laundry may

build up on the inner parts of the machine in

time and can cause damage.

Use an anti-limescale suitable for the

washing machines.

4.3 Things to be done

Some water might have remained in

the product due to the quality control

processes in the production. It is not

for energy saving

Following information will help you use the

product in an ecological and energy-efficient

manner.

harmful for the product.

• Operate the product in the highest capacity

allowed by the programme you have selected,

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

15 / EN

Preparation

4.5 Correct load capacity

The maximum load capacity depends on the type

of laundry, the degree of soiling and the washing

programme desired.

The machine automatically adjusts the amount

of water according to the weight of the loaded

laundry.

4.7 Using detergent and softener

When using detergent, softener, starch,

fabric dye, bleach or limescale remover

read the manufacturer's instructions

on the package carefully and follow the

suggested dosage values. Use measuring

cup if available.

Detergent Drawer

The detergent drawer is composed of three

compartments:

– (1) for prewash

– (2) for main wash

WARNING: Follow the information in the

“Programme and consumption table”.

A_{When overloaded, machine's washing}

performance will drop. Moreover, noise

and vibration problems may occur.

– (3) for softener

– (*) in addition, there is siphon piece in the

softener compartment.

Laundry type

Bathrobe

Napkin

Weight (g)

1200

100

Duvet cover

Bed Sheet

Pillowcase

Tablecloth

Towel

700

500

200

250

200

Hand towel

Evening gown

Underclothing

Men’s overalls

Men’s shirt

Men’s pajamas

Blouses

100

200

100

600

200

500

100

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the

washing programme.

• Never leave the detergent drawer open while

the washing programme is running!

• When using a programme without prewash,

do not put any detergent into the prewash

compartment (compartment nr. "1").

• In a programme with prewash, do not put

liquid detergent into the prewash compartment

(compartment nr. "1").

4.6 Loading the laundry

1.Open the loading door.

2.Place laundry items loosely into the machine.

3.Push the loading door to close until you hear a

locking sound. Ensure that no items are caught

in the door.

The loading door is locked while a

programme is running. The door can only

be opened a while after the programme

comes to an end.

• Do not select a programme with prewash if you

are using a detergent bag or dispensing ball.

Place the detergent bag or the dispensing ball

directly among the laundry in the machine.

• If you are using liquid detergent, do not forget

to place the liquid detergent cup into the main

wash compartment (compartment nr. "2").

Choosing the detergent type

WARNING: In case of misplacing the

laundry, noise and vibration problems may

A_{occur in the machine.}

The type of detergent to be used depends on the

type and colour of the fabric.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

16 / EN

Preparation

• Use different detergents for coloured and white

laundry.

Using liquid detergents

If the product contains a liquid detergent cup:

• Make sure that you have placed the liquid

detergent cup in compartment nr. "2".

• If the liquid detergent has lost its fluidity, dilute

it with water before putting in the detergent

cup.

• Wash your delicate clothes only with special

detergents (liquid detergent, wool shampoo,

etc.) used solely for delicate clothes.

• When washing dark coloured clothes and quilts,

it is recommended to use liquid detergent.

• Wash woolens with special detergent made

specifically for woolens.

WARNING: Use only detergents

manufactured specifically for washing

A_machines.

WARNING: Do not use soap powder.

Adjusting detergent amount

If the product does not contain a liquid

detergent cup:

The amount of washing detergent to be used

depends on the amount of laundry, the degree of

soiling and water hardness.

• Do not use liquid detergent for the prewash in a

programme with prewash.

• Liquid detergent stains your clothes when used

with Delayed Start function. If you are going to

use the Delayed Start function, do not use liquid

detergent.

Using gel and tablet detergent

Apply the following instructions when using tablet,

gel and similar detergents.

• Do not use amounts exceeding the dosage

quantities recommended on the detergent

package to avoid problems of excessive foam,

poor rinsing, financial savings and finally,

environmental protection.

• Use lesser detergent for small amounts or

lightly soiled clothes.

Using softeners

• If the gel detergent thickness is fluidal and

your machine does not contain a special liquid

detergent cup, put the gel detergent into the

main wash detergent compartment during first

water intake. If your machine contains a liquid

detergent cup, fill the detergent into this cup

before starting the programme.

Pour the softener into the softener compartment

of the detergent drawer.

• Do not exceed the (>max<) level marking in the

softener compartment.

• If the softener has lost its fluidity, dilute it with

water before putting it in the detergent drawer.

• If the gel detergent thickness is not fluidal or in

the shape of capsule liquid tablet, put it directly

into the drum before washing.

• Put tablet detergents into the main wash

compartment (compartment nr. "2") or directly

into the drum before washing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

17 / EN

Preparation

Using limescale remover

Tablet detergents may leave residues

• When required, use limescale removers

manufactured specifically for washing machines

only.

in the detergent compartment. If you

encounter such a case, place the tablet

detergent between the laundry, close

to the lower part of the drum in future

washings.

Use the tablet or gel detergent without

selecting the prewash function.

Using starch

• Add liquid starch, powder starch or the fabric

dye into the softener compartment.

• Do not use softener and starch together in a

washing cycle.

• Wipe the inside of the machine with a damp

and clean cloth after using starch.

Using bleaches

• Select a programme with prewash and add

the bleaching agent at the beginning of the

prewash. Do not put detergent in the prewash

compartment. As an alternative application,

select a programme with extra rinse and add

the bleaching agent while the machine is taking

water from the detergent compartment during

first rinsing step.

• Do not use bleaching agent and detergent by

mixing them.

• Use just a little amount (approx. 50 ml) of

bleaching agent and rinse the clothes very

well as it causes skin irritation. Do not pour the

bleaching agent onto the clothes and do not

use it for coloured clothes.

• When using oxygen based bleaches, select

a programme that washes at a lower

temperature.

• Oxygen based bleaches can be used together

with detergents; however, if its thickness

is not the same with the detergent, put the

detergent first into the compartment nr. "2"

in the detergent drawer and wait until the

detergent flows while the machine is taking in

water. Add the bleaching agent from the same

compartment while the machine is still taking in

water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

18 / EN

Preparation

4.8 Tips for efficient washing

Clothes

Light colours and

whites

Delicates/Woolens/

Silks

Colours

Dark colours

(Recommended

temperature range

(Recommended

temperature range

(Recommended

temperature range temperature range

(Recommended

based on soiling level: based on soiling level:

based on soiling

level: cold-40ºC)

based on soiling

level: cold-30ºC)

40-90ºC)

cold-40ºC)

It may be necessary

to pre-treat the

stains or perform

prewash. Powder

and liquid detergents

recommended

Powder and

liquid detergents

recommended for

Liquid detergents

suitable for

colours can be used at

dosages recommended

for heavily soiled clothes.

It is recommended to

use powder detergents

to clean clay and soil

stains and the stains

that are sensitive to

bleaches. Use detergents

without bleach.

Prefer liquid

Heavily Soiled

detergents produced

for delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

for whites can be

used at dosages

colours and dark

colours can be

used at dosages

recommended

for heavily soiled

clothes.

(difficult stains

such as grass,

coffee, fruits and

blood.)

recommended for

heavily soiled clothes.

It is recommended to

use powder detergents

to clean clay and soil

stains and the stains

that are sensitive to

bleaches.

Powder and

liquid detergents

recommended for

colours can be used at colours can be

dosages recommended used at dosages

for normally soiled

Liquid detergents

suitable for

colours and dark

Powder and

Prefer liquid

Normally Soiled

liquid detergents

recommended for

whites can be used at

dosages recommended

for normally soiled

clothes.

detergents produced

for delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

(For example,

stains caused by

body on collars

and cuffs)

recommended for

clothes. Use detergents normally soiled

without bleach.

clothes.

Powder and

liquid detergents

recommended for

colours can be used at colours can be

dosages recommended used at dosages

for lightly soiled clothes. recommended

Use detergents without for lightly soiled

Liquid detergents

suitable for

colours and dark

Powder and

Prefer liquid

liquid detergents

recommended for

whites can be used at

dosages recommended

for lightly soiled

clothes.

detergents produced

for delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

Lightly Soiled

(No visible stains

exist.)

bleach.

clothes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

19 / EN

5 Operating the product

5.1 Control panel

1 - Programme Selection knob (Uppermost

position On / Off)

5 - Start / Pause button

6 - Auxiliary Function buttons

2 - Display

3 - Delayed Start button

4 - Programme Follow-up indicator

7 - Spin Speed Adjustment button

8 - Temperature Adjustment button

5.2 Preparing the machine

Heavily soiled white cottons and linens.

(coffee table covers, tableclothes, towels,

bed sheets, etc.)

90˚C

60˚C

1.Make sure that the hoses are connected tightly.

2.Plug in your machine.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

Normally soiled, coloured, fade proof

linens, cottons or synthetic clothes (shirt,

nightgown, pajamas, etc.) and lightly soiled

white linens (underwear, etc.)

5.3 Programme selection

1.Select the programme suitable for the type,

quantity and soiling degree of the laundry

in accordance with the "Programme and

consumption table" and the temperature table

below.

40˚C-

30˚C-

Cold

Blended laundry including delicate textile

(veil curtains, etc.), synthetics and woolens.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

20 / EN

Operating the product

2.Select the desired programme with the

Programme Selection button.

5.5 Additional programmes

For special cases, additional programmes are

available in the machine.

Programmes are limited with the highest

spin speed appropriate for that particular

Additional programmes may differ

according to the model of the machine.

type of fabric.

When selecting a programme, always

consider the type of fabric, colour,

degree of soiling and permissible water

• Cotton Economic

You may wash your normally soiled durable cotton

and linen laundry in this programme with the

highest energy and water saving compared to

all other wash programmes suitable for cottons.

Actual water temperature may differ from the

declared cycle temperature. Programme duration

may automatically be shortened during later

stages of the programme if you wash less amount

(e.g. ½ capacity or less) of laundry. In this case

energy and water consumption will be further

decreased giving you the opportunity for a more

economical wash. This feature is available for

certain models having remaining time display.

temperature.

Always select the lowest required

temperature. Higher temperature means

higher power consumption.

For further programme details, see

"Programme and consumption table"

5.4 Main programmes

Depending on the type of fabric, use the following

main programmes.

• Cottons

Use this programme for your cotton laundry (such

as bed sheets, duvet and pillowcase sets, towels,

bathrobes, underwear, etc.). Your laundry will be

washed with vigorous washing action for a longer

washing cycle.

• Baby&Toddler Clothing

Use this programme to wash baby laundry, and

the laundry that belongs to allergic persons.

Longer heating time and an additional rinsing step

provide a higher level of hygiene.

• Synthetics

Use this programme to wash your synthetic

clothes (shirts, blouses, synthetic/cotton blends,

etc.). It washes with a gentle action and has a

shorter washing cycle compared to the Cottons

programme.

For curtains and tulle, use the Synthetic 40˚C

programme with prewash and anti-creasing

functions selected. As their meshed texture

causes excessive foaming, wash the veils/tulle by

putting little amount of detergent into the main

wash compartment. Do not put detergent in the

prewash compartment.

• Delicates

Use this programme to wash your delicate clothes.

It washes with a gentle action without any interim

spin compared to the Synthetics programme.

• Hand wash

Use this programme to wash your woolen/delicate

clothes that bear “not machine- washable” tags

and for which hand wash is recommended. It

washes laundry with a very gentle washing action

to not to damage clothes.

• Time Saver

Use this programme to quickly wash your little

amount of lightly soiled cotton clothes.

• Woollens

Use this programme to wash your woolen clothes.

Select the appropriate temperature complying

with the tags of your clothes. Use appropriate

detergents for woolens.

• Xpress Super Short

Use this programme to wash your little amount of

lightly soiled cotton clothes in a short time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

21 / EN

Operating the product

• Darkcare

5.7 Temperature selection

Use this programme to wash your dark coloured

laundry, or the coloured laundry that you do not

want them get faded. Washing is performed with

less mechanical movements at low temperature.

It is recommended to use liquid detergent or wool

shampoo for dark coloured laundry.

• Mixed Fabrics

Use this programme to wash your cotton and

synthetic clothes together without sorting them.

Whenever a new programme is selected,

the maximum temperature for the selected

programme appears on the temperature indicator.

To decrease the temperature, press the

Temperature Adjustment button. Temperature will

decrease gradually.

If the programme has not reached

the heating step, you can change the

temperature without switching the

machine to Pause mode.

• Shirts

Use this programme to wash the shirts made of

cotton, synthetic and synthetic blended fabrics

together.

5.8 Spin speed selection

Whenever a new programme is selected, the

recommended spin speed of the selected

programme is displayed on the spin speed

indicator.

• Sports

Use this programme to wash your garments that

are worn for a short time such as sportswear. It is

suitable to wash little amount of cotton / synthetic

blended garments.

To decrease the spin speed, press the Spin

Speed Adjustment button. Spin speed decreases

gradually. Then, depending on the model of the

product, "Rinse Hold" and "No Spin" options

appear on the display. See "Auxiliary function

selection" section for explanations of these

options.

5.6 Special programmes

For specific applications, select any of the

following programmes.

• Rinse

If the programme has not reached the

spinning step, you can change the speed

without switching the machine to Pause

Use this programme when you want to rinse or

starch separately.

• Spin + Drain

Use this programme to apply an additional spin

cycle for your laundry or to drain the water in the

machine.

mode.

Before selecting this programme, select the

desired spin speed and press Start / Pause

button. First, the machine will drain the water

inside of it. Then, it will spin the laundry with the

set spin speed and drain the water coming out of

them.

If you wish to drain only the water without

spinning your laundry, select the Pump+Spin

programme and then select the No Spin function

with the help of Spin Speed Adjustment button.

Press Start / Pause button.

Use a lower spin speed for delicate

laundries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

22 / EN

Operating the product

5.9 Programme and consumption table

Auxiliary functions

Selectable

temperature

range °C

Programme

Cottons

2.48

1.5

1600

•

Cold-90

40-60

Cottons

0.96

0.89

Cottons Eco

60**

Cottons Eco

60**

40**

0.78

0.69

2.2

1600

1400

800

•

40-60

Baby&Toddler Clothing

Time Saver

•

30-90

1.8

•

Cold-90

Cold-30

Cold-40

Time Saver

0.2

Xpress Super Short

Dark Care

0.25

0.5

Sports

0.5

800

•

Hand Wash 20

Delicates

0.15

0.23

600

•

Cold-40

Woollens

Mixed Fabrics

Shirts

1.5

0.27

0.73

0.34

0.95

0.73

600

800

600

800

•

Cold-40

Cold-60

•

Synthetics

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

23 / EN

Operating the product

• : Selectable

* : Automatically selected, no canceling.

** : Energy Label programme (EN 60456 Ed.3)

*** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin

speed.

- : See the programme description for maximum load.

** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C

cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the

on the panel.

symbols

The auxiliary functions in the table may vary according to the model of your machine.

Water and power consumption may vary subject to the changes in water pressure, water hardness and

temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and

spin speed, and changes in electric voltage.

You can see the washing time of the programme you have selected on the display of the machine. It is

normal that small differences may occur between the time shown on the display and the real washing

time.

“Selectability of auxiliary functions might be changed by the manufacturer. New selectabilities might be

added or existing ones might be removed.”

“The spin speed of your machine may vary among the programmes, however this speed cannot exceed

the max. spin speed of your machine.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

24 / EN

Operating the product

• Rinse Plus

5.10 Auxiliary function selection

Select the desired auxiliary functions before

starting the programme. Furthermore, you may

also select or cancel auxiliary functions that

are suitable to the running programme without

pressing the Start / Pause button when the

machine is operating. For this, the machine must

be in a step before the auxiliary function you are

going to select or cancel.

This function enables the machine to make

another rinsing in addition to the one already

made after the main wash. Thus, the risk for

sensitive skins (babies, allergic skins, etc.) to be

effected by the minimal detergent remnants on

the laundry can be reduced.

• Anti-Creasing

This function creases the clothes lesser when they

are being washed. Drum movement is reduced

and spinning speed is limited to prevent creasing.

In addition, washing is done with a higher water

level.

If the auxiliary function cannot be selected or

canceled, light of the relevant auxiliary function

will blink 3 times to warn the user.

Some functions cannot be selected

together. If a second auxiliary function

• Rinse Hold

If you are not going to unload your clothes

immediately after the programme completes, you

may use rinse hold function to keep your laundry

in the final rinsing water in order to prevent them

from getting wrinkled when there is no water in

the machine. Press Start / Pause button after this

process if you want to drain the water without

spinning your laundry. Programme will resume

and complete after draining the water.

If you want to spin the laundry held in water,

adjust the Spin Speed and press Start / Pause

button.

conflicting with the first one is selected

before starting the machine, the function

selected first will be canceled and the

second auxiliary function selection will

remain active. For example, if you want to

select Quick Wash after you have selected

the Prewash, Prewash will be canceled

and Quick Wash will remain active.

An auxiliary function that is not compatible

with the programme cannot be selected.

(See “Programme and consumption table”)

Auxiliary Function buttons may vary

according to the model of the machine.

The programme resumes. Water is drained,

laundry is spun and the programme is completed.

• Pet hair removal

• Prewash

This function helps to remove pet hair that remain

on your garments more effectively.

When you select this function, Prewash and Extra

Rinse steps are added to the normal programme.

Thus, washing is performed with more water

(30%) and the pet hair is removed more

effectively.

A Prewash is only worthwhile for heavily soiled

laundry. Not using the Prewash will save energy,

water, detergent and time.

Prewash without detergent is

recommended for tulle and curtains.

WARNING: Never wash your pets in the

• Quicker Wash

washing machine.

This function can be used in Cottons and

Synthetics programmes. It decreases the washing

times and also the number of rinsing steps for

lightly soiled laundry.

When you select this function, load

your machine with half of the maximum

laundry specified in the programme

table.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

25 / EN

Operating the product

Delayed Start

3.Press Start / Pause button to start the

programme.

With the Delayed Start function the startup

of the programme may be delayed up to 19

hours. Delayed start time can be increased by

increments of 1 hour.

5.11 Starting the programme

1.Press Start / Pause button to start the

programme.

2.Programme follow-up light showing the startup

of the programme will turn on.

Do not use liquid detergents when you

set Delayed Start! There is the risk of

staining of the clothes.

If no programme is started or no key

is pressed within 1 minute during

1.Open the loading door, place the laundry and

put detergent, etc.

programme selection process, the

machine will switch to Pause mode and

the illumination level of the temperature,

speed and loading door indicator lights

will decrease. Other indicator lights

and indicators will turn off. Once the

Programme Selection knob is rotated or

any button is pressed, indicator lights and

indicators will turn on again.

2.Select the washing programme, temperature,

spin speed and, if required, the auxiliary

functions.

3. Set the desired time by pressing the Delayed

Start button.

4. Press Start / Pause button. The delayed start

time you have set is displayed. Delayed start

countdown starts. “_” symbol next to the

delayed start time moves up and down on the

display.

5.12 Child Lock

Use Child Lock function to prevent children from

tampering with the machine. Thus you can avoid

any changes in a running programme.

Additional laundry may be loaded during

the delayed start period.

If the Programme Selection knob is

turned when the Child Lock is active,

“Con” appears on the display. The

5.At the end of the countdown, duration of

the selected programme will be displayed.

“_” symbol will disappear and the selected

programme will start.

Child Lock does not allow any change

in the programmes and the selected

temperature, speed and auxiliary

functions.

Changing the Delayed Start period

If you want to change the time during countdown:

1.Press Delayed Start button. Time will increase

by 1 hour each time you press the button.

2.If you want to decrease the delayed start time,

press Delayed Start button repeatedly until

the desired delayed start time appears on the

display.

Even if another programme is selected

with the Programme Selection knob

while the Child Lock is active, previously

selected programme will continue running.

Canceling the Delayed Start function

If you want to cancel the delayed start countdown

and start the programme immediately:

1.Set the Delayed Start period to zero or turn the

Programme Selection knob to any programme.

Thus, Delayed Start function will be canceled.

The End/Cancel light flashes continuously.

2.Then, select the programme you want to run

again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

26 / EN

Operating the product

To activate the Child Lock:

5.13 Progress of programme

Progress of a running programme can be followed

from the Programme Follow-up indicator. At

the beginning of every programme step, the

relevant indicator light will turn on and light of the

completed step will turn off.

You can change the auxiliary functions, speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make

must be in a step after the running programme

step. If the change is not compatible, relevant

lights will flash for 3 times.

Press and hold 1^stand 2^ndAuxiliary Function

buttons for 3 seconds. The lights on the 1^stand

2^ndAuxiliary Function buttons will flash, and

"C03", "C02", "C01" will appear on the display

respectively while you keep the buttons pressed

for 3 seconds. Then, "Con" will appear on the

display indicating that the Child Lock is activated.

If you press any button or turn the Programme

Selection knob when the Child Lock is active,

same phrase will appear on the display. The lights

on the 1st and 2nd auxiliary function buttons that

are used to deactivate the Child Lock will blink 3

times.

If the machine does not pass to the

To deactivate the Child Lock:

spinning step, Rinse Hold function might

be active or the automatic unbalanced

load detection system might be activated

due to the unbalanced distribution of the

laundry in the machine.

Press and hold 1^stand 2^ndauxiliary function

buttons for 3 seconds while any programme is

running. The lights on the 1^stand 2^ndAuxiliary

Function buttons will flash, and "C03", "C02",

"C01" will appear on the display respectively

while you keep the buttons pressed for 3 seconds.

Then, "COFF" will appear on the display indicating

that the Child Lock is deactivated.

5.14 Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the door in

cases when the water level is unsuitable.

Loading door light will start flashing when the

machine is switched to Pause mode. Machine

checks the level of the water inside. If the level is

suitable, Loading Door light illuminates steadily

within 1-2 minutes and the loading door can be

opened.

In addition to the method above, to

deactivate the Child Lock, switch the

Programme Selection knob to On / Off

position when no programme is running,

and select another programme.

Child Lock is not deactivated after

If the level is unsuitable, Loading Door light turns

off and the loading door cannot be opened. If

you are obliged to open the Loading Door while

the Loading Door light is off, you have to cancel

the current programme; see "Canceling the

programme".

power failures or when the machine is

unplugged.

5.15 Changing the selections

after programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the

machine to pause mode while a programme is

running. The light of the step which the machine

is in starts flashing in the Programme Follow-up

indicator to show that the machine has been

switched to the pause mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

27 / EN

Operating the product

Also, when the loading door is ready to be

opened, Loading Door light will also illuminate

continuously in addition to the programme step

light.

Changing the speed and temperature settings

for auxiliary functions

Depending on the step the programme has

reached, you may cancel or activate the auxiliary

functions; see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

5.17 End of programme

“End” appears on the display at the end of the

programme.

1.Wait until the loading door light illuminates

steadily.

2.Press On / Off button to switch off the machine.

3.Take out your laundry and close the loading

door. Your machine is ready for the next

washing cycle.

5.18 Your machine is equipped

with a “Standby Mode”

In case of not starting any programme or waiting

without making any other operation when the

machine is turned on by On/Off button and while

it is in selection step or if no other operation is

performed approximately 2 minutes after the

programme you selected has come to an end,

your machine will automatically switch to energy

saving mode. Brightness of indicator lights will

decrease. Also, if your product is equipped with

a display showing the programme duration, this

display will completely turn off. In case of rotating

the Programme Selection knob or pressing any

button, lights and display will restore to their

previous condition. Your selections made while

exiting the energy saving mode may change.

Check the appropriateness of your selections

before starting the programme. Readjust if

necessary. This is not a fault.

If no change is allowed, the relevant light

will flash for 3 times.

Adding or taking out laundry

1.Press the Start / Pause button to switch the

machine to pause mode. The programme

follow-up light of the relevant step during which

the machine was switched into the pause mode

will flash.

2.Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the

laundry.

4.Close the Loading Door.

5.Make changes in auxiliary functions,

temperature and speed settings if necessary.

6.Press Start / Pause button to start the machine.

5.16 Canceling the programme

To cancel the programme, turn the Programme

Selection knob to select another programme.

Previous programme will be canceled. End /

Cancel light will flash continuously to notify that

the programme has been canceled.

Pump function is activated for 1-2 minutes

regardless of the programme step, and whether

there is water in the machine or not. After this

period, your machine will be ready to start with the

first step of the new programme.

Depending on the step where the

programme was canceled in, you may

have to put detergent and softener again

for the programme you have selected

anew.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

28 / EN

6 Quick User Guide

6.1 Preparing the machine

6.6 Cancelling the programme

1.Make sure that the hoses are connected tightly. Press and hold Start / Pause / Cancel button

2.Plug in your machine.

for 3 seconds. Start symbol flashes. Symbol of

the step at which the programme was cancelled

remains lit. “End” appears on the display and the

programme is cancelled.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

6.2 Programme selection

Select the programme suitable for the type,

quantity and soiling degree of the laundry

in accordance with the "Programme and

consumption table" and the temperature table

below.

6.7 Child Lock

Use Child Lock function to prevent children from

tampering with the machine. Thus you can avoid

any changes in a running programme.

You can switch on and off the machine

with On / Off button when the Child

Lock is active. When you switch on the

machine again, programme will resume

from where it has stopped.

6.3 Auxiliary function selection

Select the desired auxiliary functions before

starting the programme. Furthermore, you may

also select or cancel auxiliary functions that are

suitable to the running programme by pressing

the Start / Pause / Cancel button when the

machine is operating. For this, the machine must

be in a step before the auxiliary function you are

going to select or cancel.

To activate the Child Lock:

Press and hold 2^ndand 4^thAuxiliary Function

buttons for 3 seconds. “Con” appears on the

display.

Same phrase will appear on the display

if you press any button when Child Lock

is enabled.

6.4 Starting the programme

1.Press Start / Pause / Cancel button to start the

programme.

2.Start symbol showing the startup of the

programme will turn on.

3.Loading door is locked and Door Locked symbol

appears on the display.

4.The symbol of the step from which the

programme has started appears on the display

(Prewash, Main Wash, Rinse, Softener and

Spin).

To deactivate the Child Lock:

Press and hold 2^ndand 4^thAuxiliary Function

buttons for 3 seconds. “COFF” appears on the

display.

Do not forget to disable the child lock

at the end of the programme if it was

enabled before. Otherwise, machine will

not allow to select a new programme.

6.5 End of programme

“End” appears on the display at the end of the

programme. Symbols of the programme steps

remain lit. Auxiliary function, spin speed and

temperature that were selected at the beginning

of the programme remain selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

29 / EN

7 Maintenance and cleaning

Service life of the product extends and frequently

faced problems decrease if cleaned at regular

intervals.

If your detergent drawer is the one indicated in the

following figure:

7.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals

(every 4-5 washing cycles) as shown below

in order to prevent accumulation of powder

detergent in time.

Lift the rear part of the siphon to remove

it as illustrated. After performing the

above mentioned cleaning procedures,

replace the siphon back to its seating

and push its front section downwards to

make sure that the locking tab engages.

1.Press the dotted point on the siphon in the

softener compartment and pull towards you

until the compartment is removed from the

machine.

7.2 Cleaning the loading

door and the drum

Residues of softener, detergent and dirt may

accumulate in your machine in time and may

cause unpleasant odours and washing complaints.

To avoid this, use the Drum Cleaning programme.

If your machine is not featured with Drum

Cleaning programme, use Cottons-90 programme

and select Additional Water or Extra Rinse

auxiliary functions as well. Run theBefore starting

the programme, put max. 100 g of powder

anti-limescale into the main wash detergent

compartment (compartment nr. 2). If the anti-

limescale is in tablet form, put only one tablet into

compartment nr. 2. Dry the inside of the bellow

with a clean piece of cloth after the programme

has come to an end.

If more than normal amount of water and

softener mixture starts to gather in the

softener compartment, the siphon must

be cleaned.

2.Wash the detergent drawer and the siphon with

plenty of lukewarm water in a washbasin. Wear

protective gloves or use an appropriate brush

to avoid touching of the residues in the drawer

with your skin when cleaning.

3.Insert the drawer back into its place after

cleaning and make sure that it is seated well.

Repeat Drum Cleaning process in every

2 months.

Use an anti-limescale suitable for the

washing machines.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

30 / EN

Maintenance and cleaning

After every washing make sure that no foreign

substance is left in the drum.

1.Close the taps.

2.Remove the nuts of the water intake hoses to

access the filters on the water intake valves.

Clean them with an appropriate brush. If the

filters are too dirty, take them out by means of

pliers and clean them.

3.Take out the filters on the flat ends of the water

intake hoses together with the gaskets and

clean thoroughly under running water.

4.Replace the gaskets and filters carefully in their

places and tighten the hose nuts by hand.

If the holes on the bellow shown in the figure is

blocked, open the holes using a toothpick.

7.5 Draining remaining water

and cleaning the pump filter

Foreign metal substances will cause

rust stains in the drum. Clean the stains

The filter system in your machine prevents solid

items such as buttons, coins and fabric fibers

clogging the pump impeller during discharge of

washing water. Thus, the water will be discharged

without any problem and the service life of the

pump will extend.

on the drum surface by using cleaning

agents for stainless steel. Never use steel

wool or wire wool.

WARNING: Never use sponge or scrub

materials. These will damage the painted

A_{and plastic surfaces.}

If the machine fails to drain water, the pump filter

is clogged. Filter must be cleaned whenever it

is clogged or in every 3 months. Water must be

drained off first to clean the pump filter.

In addition, prior to transporting the machine

(e.g., when moving to another house) and in case

of freezing of the water, water may have to be

drained completely.

7.3 Cleaning the body

and control panel

Wipe the body of the machine with soapy water or

non-corrosive mild gel detergents as necessary,

and dry with a soft cloth.

Use only a soft and damp cloth to clean the

control panel.

WARNING: Foreign substances left

in the pump filter may damage your

A_{machine or may cause noise problem.}

7.4 Cleaning the water intake filters

There is a filter at the end of each water intake

valve at the rear of the machine and also at the

end of each water intake hose where they are

connected to the tap. These filters prevent foreign

substances and dirt in the water to enter the

washing machine. Filters should be cleaned as

they do get dirty.

In order to clean the dirty filter and discharge the

water:

1.Unplug the machine to cut off the supply power.

WARNING: Temperature of the water

inside the machine may rise up to 90 ºC.

A_{To avoid burning risk, filter must be}

cleaned after the water in the machine

cools down.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

31 / EN

Maintenance and cleaning

2.Open the filter cap.

container is full, block the inlet of the hose

by replacing the plug. After the container is

emptied, repeat the above procedure to drain

the water in the machine completely.

c. When draining of water is finished, close the

end by the plug again and fix the hose in its

place.

If the filter cap is composed of two pieces,

press the tab on the filter cap downwards and

pull the piece out towards yourself.

d. Turn the pump filter to take it out.

Discharging the water when the product does not

have an emergency draining hose:

If the filter cap is one piece, pull the cap from both

sides at the top to open.

a. Place a large container in front of the filter to

catch water from the filter.

b. Loosen pump filter (anticlockwise) until water

starts to flow. Fill the flowing water into the

container you have placed in front of the filter.

Always keep a piece of cloth handy to absorb

any spilled water.

c. When the water inside the machine is finished,

take out the filter completely by turning it.

4.Clean any residues inside the filter as well as

fibers, if any, around the pump impeller region.

5.Install the filter.

6.If the filter cap is composed of two pieces, close

the filter cap by pressing on the tab. If it is one

piece, seat the tabs in the lower part into their

places first, and then press the upper part to

close.

You can remove the filter cover by slightly

pushing downwards with a thin plastic

tipped tool, through the gap above the

filter cover. Do not use metal tipped tools

to remove the cover.

3.Some of our products have emergency draining

hose and some does not have. Follow the steps

below to discharge the water.

Discharging the water when the product has an

emergency draining hose:

a. Pull the emergency draining hose out from its

seat

b. Place a large container at the end of the hose.

Drain the water into the container by pulling

out the plug at the end of the hose. When the

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

32 / EN

8 Troubleshooting

Programme cannot be started or selected.

• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure,

etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. Previous

programme will be canceled. (See “Cancelling the programme”)

Water in the machine.

• Some water might have remained in the product due to the quality control processes in the production. >>> This

is not a failure; water is not harmful to the machine.

There is water leaking from the bottom of the washing machine.

• Likely problems with hoses or the pump filter. >>> Be sure the seals of the water inlet hoses are securely fitted.

Attach the hose to the tap tightly.

• Pump filter might not be closed fully. >>> Make sure that the pump filter is completely closed.

Machine does not fill with water.

• Tap is turned off. >>> Open the inlet water taps fully.

• Water inlet hose is bent. >>> Flatten the water inlet hose.

• Water inlet filter is clogged. >>> Clean the water inlet filter.

• The loading door is ajar. >>> Close the Loading Door.

Machine does not drain water.

• Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.

• Pump filter is clogged. >>> Clean the pump filter.

Machine vibrates or makes noise.

• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

• A hard substance might have entered into the pump filter. >>> Clean the pump filter.

• Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.

• Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.

• Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the

load by hand to balance it homogenously in the machine.

• Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

• Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage

restores to the normal level.

Machine directly discharges the water it takes in.

• Draining hose might not be at adequate height. >>> Connect the water draining hose as described in the

operation manual.

No water can be seen in the machine during washing.

• The water level is not visible from outside of the washing machine. This is not a failure.

Loading door cannot be opened.

• Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or

Spin programme.

• Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.

• Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an

end. >>> Wait for a couple of minutes for deactivation of the door lock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

33 / EN

Troubleshooting

Washing takes longer time than specified in the manual.(*)

• Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing

quality due to the decreased amount of water. Therefore, the washing time extends.

• Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is

low.

• Input temperature of water might be low. >>> Required time to heat up the water extends in cold seasons. Also,

washing time can be lengthened to avoid poor washing results.

• Number of rinses and/or amount of rinse water might have increased. >>> Machine increases the amount of

rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

• Excessive foam might have occurred and automatic foam absorption system might have been activated due to

too much detergent usage. >>> Use recommended amount of detergent.

Programme time does not countdown. (On models with display)(*)

• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate

amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due

to lack of water. Timer indicator will resume countdown after this.

• Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the

selected temperature.

• Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due

to the unbalanced distribution of the laundry in the drum.

Programme time does not countdown.(*)

• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system

might be activated due to the unbalanced distribution of the laundry in the drum.

Machine does not switch to spinning step.(*)

• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system

might be activated due to the unbalanced distribution of the laundry in the drum.

• The machine will not spin if water is not drained completely. >>> Check the filter and the draining hose.

• Excessive foam might have occurred and automatic foam absorption system might have been activated due to

too much detergent usage. >>> Use recommended amount of detergent.

Washing performance is poor: Laundry turns gray.(**)

• Insufficient amount of detergent was used over a long period of time. >>> Use the recommended amount of

detergent appropriate for water hardness and the laundry.

• Washing was made at low temperatures for a long time over a long period of time. >>> Select the proper

temperature for the laundry to be washed.

• Insufficient amount of detergent is used with hard waters. >>> Using insufficient amount of detergent with

hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate

graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the

laundry.

• Too much detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness

and the laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

34 / EN

Troubleshooting

Washing performance is poor: Stains persist or the laundry is not whitened.(**)

• Insufficient amount of detergent is used. >>> Use recommended amount of detergent appropriate for the

laundry.

• Excessive laundry was loaded in. >>> Do not load the machine in excess. Load with amounts recommended in

the "Programme and consumption table".

• Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the

laundry to be washed.

• Wrong type of detergent is used. >>> Use original detergent appropriate for the machine.

• Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment. Do not mix the

bleaching agent and the detergent with each other.

Washing performance is poor: Oily stains appeared on the laundry.

• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see 7.2.

Washing performance is poor: Clothes smell unpleasantly.(**)

• Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/

or in short programmes. >>> Leave the detergent drawer as well as the loading door of the machine ajar after

each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine.

Colour of the clothes faded.(**)

• Excessive laundry was loaded in. >>> Do not load the machine in excess.

• Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose

them to excessive temperatures.

• A higher temperature is selected. >>> Select the proper programme and temperature according to the type and

soiling degree of the laundry.

It does not rinse well.

• The amount, brand and storage conditions of the detergent used are inappropriate. >>> Use a detergent

appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of

humidity and do not expose them to excessive temperatures.

• Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although

prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent

in the correct compartment.

• Pump filter is clogged. >>> Check the filter.

• Drain hose is folded. >>> Check the drain hose.

Laundry became stiff after washing.(**)

• Insufficient amount of detergent is used. >>> Using insufficient amount of detergent for the water hardness can

cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.

• Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although

prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent

in the correct compartment.

• Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the

dispenser with hot water.

Laundry does not smell like the softener.(**)

• Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although

prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean

the dispenser with hot water. Put the detergent in the correct compartment.

• Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the

dispenser with hot water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

35 / EN

Troubleshooting

Detergent residue in the detergent drawer.(**)

• Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent.

• Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose

them to excessive temperatures.

• Water pressure is low. >>> Check the water pressure.

• The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent

compartment are blocked. >>> Check the holes and clean if they are clogged.

• There is a problem with the detergent drawer valves. >>> Call the Authorized Service Agent.

• Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the

dispenser with hot water.

There is detergent left on the laundry. (**)

• Excessive laundry was loaded in. >>> Do not load the machine in excess.

• Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the

laundry to be washed.

• Wrong detergent was used. >>> Select the proper detergent for the laundry to be washed.

Too much foam forms in the machine.(**)

• Improper detergents for the washing machine are being used. >>> Use detergents appropriate for the washing

machine.

• Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.

• Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store

in excessively hot places.

• Some meshed laundry such as tulle may foam too much because of their texture. >>> Use smaller amounts of

detergent for this type of item.

• Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment.

• Softener is being taken early. >>> There may be problem in the valves or in the detergent dispenser. Call the

Authorized Service Agent.

Foam is overflowing from the detergent drawer.

• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash

compartment of the detergent drawer.

• Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme

and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the

amount of detergent.

Laundry remains wet at the end of the programme (*)

• Excessive foam might have occurred and automatic foam absorption system might have been activated due to

too much detergent usage. >>> Use recommended amount of detergent.

Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be

rearranged and re-spun.

** Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see 7.2.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

36 / EN

Troubleshooting

Machine does not start. Nothing appears on the display.

Machine may be unplugged. >>> Check the plug and attach it to the socket.

Fuse may be defective. >>> Check the fuse and have it replaced by a qualified electrician if necessary.

Power may be out. >>> Check if there is any power outage.

On / Off button might not be pressed. >>> Press On / Off button.

Machine does not start when Start / Pause / Cancel button is pressed after selecting the programme.

Loading door may be open. >>> Close the loading door.

Rinse symbol flashes in the display. (No Water symbol may also be lit depending on the model of your

machine).

Water may be cut off. >>> Make sure that the water is not cut off and press Start / Pause / Cancel button

again to start your machine.

WARNING: If you cannot eliminate the problem although you follow the instructions in this section,

consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product

A_yourself.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

37 / EN

PRODUCT FICHE

Complying Commission Delegated Regulation (EU) No 1061/201

Supplier name or trademark

Beko

Model name

WMP632B

Rated capacity (kg)

Energy efficiency class ⁽¹⁾

A+

Annual Energy Consumption (kWh) ⁽²⁾

182

Energy consumption of the standard 60°C cotton programme at full load (kWh)

Energy consumption of the standard 60°C cotton programme at partial load (kWh)

Energy consumption of the standard 40°C cotton programme at partial load (kWh)

Power consumption in ‘off-mode’ (W)

0.891

0.781

0.692

0.250

Power consumption in ‘left-on mode’ (W)

Annual Water Consumption (l) ⁽³⁾

1.000

8800

Spin-drying efficiency class ⁽⁴⁾

Maximum spin speed (rpm)

1300

Remaining moisture Content (%)

Standard cotton programme⁽⁵⁾

Cotton Eco 60°C and 40°C

Programme time of the standard 60°C cotton programme at full load (min)

Programme time of the standard 60°C cotton programme at partial load (min)

Programme time of the standard 40°C cotton programme at partial load (min)

Duration of the left-on mode (min)

160

148

133

N/A

Built-in

⁽¹⁾Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)

⁽²⁾Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial

load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.

⁽³⁾Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load.

Actual water consumption will depend on how the appliance is used.

⁽⁴⁾Scale from A (Highest Efficiency) to G (Lowest Efficiency)

⁽⁵⁾“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes

to which the information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton

laundry and that they are the most efficient programmes in terms of combined energy and water consumption.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

38 / EN

Service

Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it

should the product require attention under guarantee.

You should also complete the details below; it will help us assist you when requesting service. (The

model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label

affixed to the appliance)

Model No:

Serial No:

Retailer:

Date of purchase:

For service under guarantee simply telephone the appropriate number below

UK Mainland & Northern Ireland

Fridges & Freezers

Electric Cookers

Gas &

0845 600 4903

0845 600 4902

0845 600 4905

Dual Fuel Cookers

Washing Machines &

Dishwashers

0845 600 4906

Republic of Ireland

All Refrigeration, 01 862 3411

All Cookers

Washing Machines & Dishwashers

Before requesting service please check the trouble-shooting guide in the Operating Instructions as a

charge may be levied where no fault is found even though your product may still be under guarantee.

Service once the manufacturers guarantee has expired.

If you have purchased an extended guarantee please refer to the instructions contained within the

extended guarantee agreement document. Otherwise please call the appropriate number above where

service can be obtained at a charge.

Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.

Tel: 0845 600 4911

e-mail:[email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

Guarantee

Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the

date of the original purchase.

What is covered?

• Repairs necessary as a result of faulty materials, defective components or manufacturing defect.

• The cost of functional replacement parts, but excluding consumable items.

• The labour costs of a Beko approved repairer to carry out the repair.

What is not covered?

• Transit, delivery or accidental damage or misuse and abuse.

• Cabinet or appearance parts, including knobs, flaps, handles or container lids.

• Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets,

filters and light bulbs.

• Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the

requirements contained in the user instruction book.

• Repairs to products used on commercial or non-residential household premises.

• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included within your

household contents insurance policy, or may be available separately from your retailer).

Important notes.

• Your Beko product is designed and built for domestic household use only.

• The guarantee will be void if the product is installed or used in commercial or non-residential

domestic household premises.

• The product must be correctly installed, located and operated in accordance with the instructions

contained in the User Instructions Booklet provided.

• Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all

Washing Machines, Dishwashers and Electric Cookers

• Gas Cookers must only be installed by a CORGI (or BORD GAIS) registered Gas Installer.

• The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland.

• The guarantee is applicable only to new products and is not transferable if the product is resold.

• Beko disclaims any liability for incidental or consequential damages.

• The guarantee does not in anyway diminish your statutory or legal rights.

Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.

Tel: 0845 600 4911

e-mail:[email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

www.beko.com

Bifinett Scale KH 1155 User Manual
Billy Goat Blower QB883, QB883H, QB1103, QB1103H User Manual
Black Decker Sander 492310 00 User Manual
Briggs Stratton Lawn Mower S175X User Manual
Broan Indoor Furnishings QTR070L User Manual
Bush Hog Brush Cutter SM60 User Manual
Carrier Beverage Dispenser CVL185 User Manual
Carrier Furnace 58DH User Manual
Casio Calculator FX 100MS User Manual
Chrysler Automobile 2004 Pacifica User Manual