WMB 91242 DLSC
Washing Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Auxiliary functions . . . . . . . . . . . . . . . . 19
Time display . . . . . . . . . . . . . . . . . . . . 19
Starting the Program . . . . . . . . . . . . . . 20
Progress of program . . . . . . . . . . . . . . 20
Changing the selections after the program
has started . . . . . . . . . . . . . . . . . . . . . 21
Switching the machine to standby mode21
Child-proof lock. . . . . . . . . . . . . . . . . . 21
Ending the program through canceling 21
Program in rinse hold mode. . . . . . . . . 22
End of program . . . . . . . . . . . . . . . . . . 22
1 Your Washing Machine
4
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . 5
2 Warnings
6
General Safety. . . . . . . . . . . . . . . . . . . . 6
First Use . . . . . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . . . 6
Safety instructions . . . . . . . . . . . . . . . . . 7
If there are children in your house... . . . . 7
3 Installation
8
6 Quick instructions for daily
use
23
24
Removing packaging reinforcement. . . . 8
Opening the transportation locks. . . . . . 8
Appropriate installation location . . . . . . . 8
Adjusting the feet. . . . . . . . . . . . . . . . . . 8
Connecting to the water supply. . . . . . . 8
Connecting to the drain . . . . . . . . . . . . . 9
Electrical connection . . . . . . . . . . . . . . 10
Destroying the packaging material. . . . 10
Disposing of the old machine. . . . . . . . 10
7 Cleaning and care
Detergent drawer. . . . . . . . . . . . . . . . . 24
The door and the drum . . . . . . . . . . . . 24
Outer cabinet and control panel. . . . . . 24
Inlet water filters. . . . . . . . . . . . . . . . . . 24
Draining any remaining water and cleaning
the pump filter . . . . . . . . . . . . . . . . . . . 25
4 Initial preparations for
washing
8 Solution suggestions for
problems
11
27
Sorting the laundry . . . . . . . . . . . . . . . 11
Preparing clothes for washing . . . . . . . 11
Correct load capacity . . . . . . . . . . . . . 11
Loading door. . . . . . . . . . . . . . . . . . . . 12
Detergents and softeners . . . . . . . . . . 12
5 Selecting a Program and
Operating Your Machine
14
Control panel. . . . . . . . . . . . . . . . . . . . 14
Display symbols. . . . . . . . . . . . . . . . . . 15
Turning the machine on . . . . . . . . . . . . 15
Program selection . . . . . . . . . . . . . . . . 15
Additional programs . . . . . . . . . . . . . . 15
Special programs . . . . . . . . . . . . . . . . 17
Temperature selection . . . . . . . . . . . . . 17
Spin Speed selection. . . . . . . . . . . . . . 17
Program and consumption table . . . . . 18
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Your Washing Machine
Overview
3
4
1
2
5
6
1 - Detergent Drawer
2 - Door
4 - Control Panel
5 - Filter Cap
3 - Top Lid
6 - Height-adjustable feet
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Specifications
Models
WMB 91242 DLSC
Maximum dry laundry capacity (kg)
Height (cm)
9
84
Width (cm)
60
Depth (cm)
59
73
220-240 V / 50Hz
10
Net Weight (±4 kg)
Electricity (V/Hz.)
Total Current (A)
Total Power (W)
Spinning cycle (rpm max.)
2000-2350
1200
Specifications of this appliance may change without notice to improve the quality of the
product. Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, values may vary.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2
Warnings
Please read the following information.
Otherwise, there may be the risk of
personal injury or material damage.
Moreover, any warranty and reliability
commitment will become void.
First Use
•
To prepare your machine for washing,
carry out your first washing process
without loading your machine and
with detergent under “Cottons 90°C”
program.
Ensure that the cold and hot water
connections has been made correctly
when installing your machine.
General Safety
•
Never place your machine on a carpet
covered floor. Otherwise, lack of
airflow from below of your machine
may cause electrical parts to overheat.
This may cause problems with your
washing machine.
•
Otherwise, your laundry may come
out hot at the end of the washing
process and may wear out.
•
•
•
If the power cable or mains plug is
damaged you must call Authorized
Service for repair.
•
•
If the current fuse or circuit breaker is
less than 16 Amperes, please have
a qualified electrician install a 16
Ampere fuse or circuit breaker.
While using with or without a
Check water hoses for wear. Do not
use old/used water inlet hoses. These
may cause stains on your laundry.
Fit the drain hose into the discharge
housing securely to prevent any
water leakage and to allow machine
to take in and discharge water as
required. It is very important that the
water intake and drain hoses are not
folded, squeezed, or broken when the
appliance is pushed into place after it
is installed or cleaned.
Your washing machine is designed to
continue operating in the event of a
power interruption. You cannot cancel
any program by pressing the “On/Off
button.” Your machine will not resume
its program when the power restores.
Press the “Start/Pause/Cancel” button
for 3 seconds to cancel the program
(See, Cancelling a Program)
There may be some water in your
machine when you receive it. This is
from the quality control process and
is normal. It is not harmful to your
machine.
Some problems you may encounter
may be caused by the software. Press
“Start/Pause/Cancel” button for 3
seconds to cancel the program set
in your machine before calling the
authorized service.
transformer, do not neglect to have
the grounding installation laid by a
qualified electrician. Our company
shall not be liable for any damages
that may arise when the machine is
used on a line without grounding.
To make your machine ready for use,
please be sure that the tap water
supply and water drainage systems
are appropriate before calling the
authorized service. If they are not,
call a qualified plumber to have any
necessary arrangements carried out.
•
•
Intended use
•
This product has been designed for
home use.
The appliance may only be used for
washing and rinsing of textiles that are
marked accordingly.
Only detergents, softeners and
supplements suitable for washing
machines may be used.
Observe the care instructions labelled
on textile products and any other
instructions given by companies that
produce detergents for your machine.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
•
•
•
•
•
•
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
If there are children in your
house...
•
Electrical appliances may be
dangerous for the children. Keep
children away from the machine when
it is operating. Do not let them tamper
with the machine.
Safety instructions
•
•
•
This appliance must be connected to
an earthed outlet protected by a fuse
of suitable capacity.
•
•
Close the door when you leave the
area where the machine is located.
Store all detergents in a safe place out
of reach of the children.
The supply and draining hoses must
always be securely fastened and
remain in an undamaged state.
Fit the draining hose to a washbasin
or bathtub securely before starting up
your machine. There may be a risk of
being scalded due to high washing
temperatures!
•
•
Never open the door or remove the
filter while there is still water in the
drum. Otherwise, there may be the
risk of flooding and possible injury due
to the hot water.
Never force open the locked door!
The door will be ready to open just a
few minutes after the washing cycle
comes to an end.
•
•
Unplug the machine when it is not in
use.
Never wash down the appliance with a
water hose! There is the risk of electric
shock! Always disconnect from the
mains by unplugging before cleaning.
Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out from the plug only. Do
not operate the machine if the power
cord or plug is damaged.
•
•
•
Never attempt to repair the machine
yourself. Otherwise, you may be
putting yours and other’s lives in
danger.
For malfunctions that cannot be
solved by information in the operating
manual:
Turn off the machine, unplug it, turn
off the water tap and contact an
authorized service agent.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7
3
Installation
washing machine needs to be moved
again in the future.
Never move the appliance without the
transportation safety bolts properly
fixed in place!
Removing packaging
reinforcement
C
Tilt the machine to remove the packaging
reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Appropriate installation location
Install the appliance in environments which
have no risk of freezing, in a stable and
level position.
The floor must be capable of carrying
the load on it!
C
If the washing machine and a drier
are placed on top of each other, their
approximate weight together may
reach 180 kg when they are full.
C
Important:
•
•
•
Do not place the appliance on top of
the power cable.
Keep at least 1cm distance from the
edges of other furniture.
Place the machine on a firm surface;
do not position it on a long pile rug or
such like surfaces.
Opening the transportation
locks
Transportation safety bolts must be
removed before operating the washing
machine! Otherwise, the machine will
be damaged!
C
Adjusting the feet
Do not use any tools to loosen the
1. Loosen all the bolts with a spanner
C
lock nuts. Otherwise, they can be
damaged.
until they rotate freely (“C”)
1. Manually (by hand) loosen the lock
nuts on the feet.
2. Adjust them until the machine stands
level and firm.
3. Important: Tighten all lock nuts up
again.
2. Remove transportation safety bolts by
turning them gently.
3. Fit the covers (supplied in the bag with
the Operation Manual) into the holes
on the rear panel. (“P”)
Connecting to the water supply.
Important:
•
The water supply pressure required
to run the machine must be 1-10 bar
(0,1 – 1,0 MPa). Attach a pressure-
reducing valve if the water pressure is
Keep the transportation safety bolts
C
in a safe place to reuse when the
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
higher.
•
Models with a single water inlet should
not be connected to the hot water
tap. Laundry may be damaged or the
appliance may switch to protection
mode and not work.
•
Connect the special hoses supplied
with the machine to the water intake
valves on the machine. The hose
bearing the “red” sign (90°C max)
is the hot water inlet and the hose
bearing the “blue” sign (25°C max) is
for the cold water inlet.
When returning the appliance to its place
after maintenance or cleaning, care should
be taken not to fold, squeeze or block the
hoses.
Connecting to the drain
The water discharge hose can be
attached to the edge of a washbasin or
bathtub. The drain hose should be firmly
fitted into the drain as to not loosen in its
housing.
Important:
•
The end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The
fitting must be secured in all types
of connections. Your house may be
flooded if the hose falls out of its
housing during water discharging.
The hose should be attached to a
height of at least 40 cm, and 100 cm
at most.
•
If you are going to use your double
water-inlet machine as a single (cold)
water-inlet unit, you must install the
stopper*, supplied with your machine
to the hot water valve.
If you want to use both water inlets of
the product, you can connect the hot
water hose after removing the stopper
and gasket group from the hot water
valve.
•
* Applies for the products supplied
with a blind stopper group.
•
Open the taps completely after
making the hose connection to check
if there is any water leakage at the
connection points. Turn off the tap
and remove the nut in case of any
leakage. Retighten the nut carefully
after checking the seal. To prevent any
water leakage and any other damage
to be caused by it, keep the taps
closed when the machine is not in
use.
•
•
In case the hose is elevated after
laying it on the floor level or close to
the ground (less than 40 cm above the
ground), water discharge becomes
more difficult and the laundry may
come out wet. Therefore, the heights
described in the figure should be
followed.
To prevent dirty water refilling the
machine, and to allow for easy
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9
discharge, the end of the hose must
not be submerged in the drain water.
The end of the hose must be able
to take in air. The hose should be
pushed into the drainage for more
than 15 cm. If it is too long you may
have it shortened.
The end of the hose should not be
bent, it should not be stepped on and
it must not be folded between the
drain and the machine.
The length of the hose is too short,
you may add an extension hose to the
original section. The length of the hose
must not be longer than 3.2 m after
coming out of the machine. To avoid
water leakage failures, the connection
between the extension hose and the
drain hose of the product must be
fitted well with an appropriate clamp
as not to come off and leak.
domestic waste.
Packaging materials of your machine are
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an
environmental friendly manner.
•
•
•
You may refer to your local agent or
solid waste collection center in your
municipality to learn how to dispose of
your machine.
Before disposing of your old washing
machine, cut off the mains plug and make
the door lock unusable.
Electrical connection
Connect the machine to an earthed outlet
protected by a fuse of suitable capacity.
Important:
•
•
•
Connection should comply with
national regulations.
Power cord plug must be within easy
reach after installation.
The voltage and the allowed fuse
protection are specified in the section
“Technical Specifications”.
•
•
The specified voltage must be equal
to your mains voltage.
Connection via extension cords or
multi-plugs should not be made.
A damaged power cable must be
replaced by a qualified electrician.
The appliance must not be operated
unless it is repaired! There is the risk
of electric shock!
B
B
Destroying the packaging
material
Packaging material can be dangerous to
children. Keep the packaging materials out
of reach of children or dispose them by
classifying according to waste directives.
Do not dispose them together with normal
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Initial preparations for washing
•
Empty pockets and remove all foreign
Sorting the laundry
objects such as coins, pens and
paper clips. If possible, turn pockets
out and brush.
•
Sort the laundry according to type of
fabric, colour, and degree of soiling
and permissible water temperature.
Always follow the advice on the
garment labels.
•
Place small items like infants’ socks
and nylon stockings, etc. in a laundry
bag, pillow case or something similar.
This will also save your laundry from
getting lost.
•
•
•
Place curtains in the machine with
care. Remove curtain rails and pullers.
Fasten zippers, sew loose buttons
and mend rips and tears.
Wash “machine washable” or “hand
washable” labelled products only with
an appropriate Programme.
Do not wash colours and whites
together. New, dark coloured cottons
may release a lot of dye. Wash them
separately.
Non machine
washable
Washing water
Wash with
Do not wash
temperature sensitive, short
programmes.
Bleach can be Do not use
Dry-cleanable
Do not
dry-clean
•
used
bleach
•
•
Tough stains must be treated properly
before washing. If you are not sure,
check with a dry cleaner.
Use only dyes/colour changers and
lime removers suitable for machine
wash. Always follow the instructions
on the packaging.
Suitable for
drier
Do not dry
with drier
Dry
horizontally
Dry on a
hanger
•
•
Wash trousers and delicate clothes
turned inside out.
Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce
pilling.
Hang without Can be ironed
Can be
Do not iron
spinning
with hot iron ironed with
warm iron
Preparing clothes for washing
Laundry items with metal attachments
such as, bras, belt buckles and metal
buttons will damage the machine. Remove
metal attachments or place the items in
a clothing bag, pillow case, or something
similar.
Correct load capacity
•
The maximum load capacity depends
on the type of laundry, the degree of
soiling and the washing Programme
you wish to use.
The machine adjusts the amount of
water according to the amount of
laundry placed inside.
Please follow the information in
the "Programme Selection Table".
Washing results will degrade when the
machine is overloaded.
C
C
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Following weights are given as examples.
Detergent, softener and other
cleaning agents
Add detergent and softener before starting
the washing Programme.
Never open the detergent dispenser
drawer while the washing Programme is
running!
When using a Programme without pre-
wash, no detergent should be put into the
pre-wash compartment (Compartment
no. I).
Laundry type
Bathrobe
Napkin
Weight (gr.)
1200
100
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
700
500
200
250
200
A Programme without pre-wash should be
selected if a detergent bag or a dispensing
ball is going to be used. You can place
the detergent bag or the dispensing
ball directly among the laundry in your
machine.
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pyjamas
Blouse
200
100
600
200
500
100
Choosing the detergent type
The type of detergent to be used depends
on the type and colour of fabric.
Loading door
The door is locked during Programme
operation. The door can be opened after
some time following the Programme end.
•
•
•
Use different detergents for coloured
and white clothes.
Wash woollen with a special detergent
specifically for woollens.
Use only detergents manufactured
specifically for automatic washing
machines.
•
•
Open the door.
Place laundry items loosely in the
machine.
•
Push the door until it clicks into place
tightly. Ensure that no items are
caught in the door.
Detergent quantity
The amount of washing detergent to be
used depends on the amount of laundry,
the degree of soiling and water hardness.
Detergents and softeners
Detergent drawer
The detergent drawer is composed of
three compartments:
•
Do not use amounts exceeding
the quantities recommended on
the package to avoid problems of
excessive foam, poor rinsing, financial
savings and finally, environmental
protection.
The detergent dispenser may be in two
different types according to the model of
your machine.
- (I) for prewash
- (II) for main wash
- (III) siphon
•
•
Use small amounts of detergent at a
suitable measure for small amounts
of laundry or for only slightly soiled
laundry.
Use exact measures for highly
concentrated detergents.
– ( ) for softener
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
quantity
for prewashing
for main washing
1/2 measure
1 measure
an additional 1/2
measure
with hard water
Softener
Put the softener into the softener
compartment of the detergent dispenser.
•
Use the proportions recommended on
the packet.
•
Never exceed the (> max <) level
marking; otherwise, the softener will
be wasted without being used.
If the softener has lost its fluidity, dilute
dense softener with water before
placing it in the detergent drawer.
•
Liquid detergent
When using liquid or gel washing
detergents, please note the following:
•
The liquid detergent may leave stains
on your laundry if time delay feature is
selected.
•
•
•
Do not use liquid detergent if you want
to wash using the time delay feature.
Do not use liquid detergent for the
main wash in a cycle with pre-wash.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Starch
•
Add liquid starch, powder starch
or the fabric dye into the softener
compartment as instructed on the
package.
•
•
Never use fabric softener and starch
together in the same washing cycle.
Wipe the inside of the drum after using
starch.
Eliminating lime formation
•
When required, use only appropriate
lime removers developed specifically
for washing machines and always
follow the instructions on the package.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
13
5
Selecting a Program and Operating Your Machine
Control panel
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
Spin Speed Adjustment Button
Display
Temperature Adjustment Button
Program Selection Knob
On/Off Button
Time Delaying Button (+/-)
Auxiliary Function Buttons
Start/Pause/Cancel Button
Dark wash Dark wash Synthetics Cottons Pre-wash
Main
wash
Rinse
Wash
Spin
Delicates Pet hair
removal
Drain
Anti-
creasing
Duvet
Child-
proof lock Wash
Hand
Baby
Finished
Jeans
Cotton Woolens expres 14
Daily
Super short
express
Eco
Temperature Self
Daily
express
Rinse hold
Start/ No spin
Pause
Quick
wash
Cold
Lingerie
Clean
Mixed 40 Super 40 Extra rinse Freshen
up
Shirts
Sport Time delay Intensive
Fasion
care
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Display symbols
washing, rinsing and, if required, spin
cycles.
a
b
c d e
f
When selecting the program you are
going to use, always consider type
of fabric, color, degree of soiling and
permissible water temperature.
Always select the lowest required
temperature. Higher temperature
means higher power consumption.
For further program details, see
“Program Selection Table”
A
m
g
A
C
h
i
F3
F2
F4
F1
l
k
j
• Cottons
You can wash your durable clothes with
this program. Your laundry will be washed
with vigorous washing movements during
a longer washing cycle. It is recommended
for your cotton items (such as bed sheets,
duvet and pillowcase sets, bathrobes,
underclothing, etc.).
a
- Spin Symbol
- Spin Speed Indicator
b
c – Water cut-off symbol (According to
your machine’s model)
d
e
f
g
h
i
- Economy Symbol
- Temperature Indicator
- Temperature Symbol
- Door Locked Symbol
- Standby Symbol
• Synthetics
You can wash your less durable clothes on
this program. Gentler washing movements
and a shorter washing cycle is used
compared to the “Cottons” program. It is
recommended for your synthetic clothes
(such as shirts, blouses, synthetic/cotton
blended garments, etc.). For curtains and
lace, the “Synthetic 40” program with pre-
wash and anti-creasing functions selected
is recommended. Detergent should not
be put in the pre-wash compartment.
Less detergent should be put in the main
wash compartment as loose knit fabrics
(lace) foam too much due to its meshed
structure.
- Start Symbol
j
k
- Auxiliary Function Symbols
- Remaining Time and Delaying Time
Indicator
l
- Program Indicator Symbols (pre-
wash/main wash/rinse/softener/spin)
- Time Delaying Symbol
m
Turning the machine on
Plug in your machine. Turn the tap on
completely. Check if the hoses are
connected tightly. Place the laundry in
the machine. Add detergent and softener.
Press the “On/Off” button.
Program selection
• Woollens
Select the appropriate program from the
program table according to type, amount
and degree of soiling of the laundry and
washing temperatures.
You can wash your machine-washable
woolen garments on this program. Wash
by selecting the proper temperature
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woolens.
Turn the Programme Selection Knob to the
program mode that you wish to wash your
laundry.
Additional programs
For special cases, there are also extra
programs available:
The recommended temperature and spin
speed for the selected program appear.
Press “Start/Pause/Cancel” button to start
the program.
Additional programs may differ
according to the model of your
machine.
C
Main programs
Depending on the type of textile, the
following main programs are available:
Each of these main programs comprise
of a complete washing process, including
• Cotton Economic
You may wash your laundry to be washed
in cottons program in longer periods which
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
15
ensure very good washing performance.
Cottons economy program consumes
less energy compared to other
cottons programs.
C
• Babycare
Increased hygiene is provided by a longer
heating period and an additional rinse
cycle. It is recommended for baby clothes
and clothes worn by allergic people.
• Hand wash
You can wash your woolen/delicate
clothes that bear “not machine-
washable” labels for which hand wash is
recommended on this program. It washes
the laundry with very tender washing
movements without damaging your
clothes.
Each of these main programs comprise
of a complete washing process, including
washing, rinsing and, if required, spin
cycles.
Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature while
choosing a program.
C
• Daily Express
This program is used to wash lightly soiled
and unstained cotton garments in a short
time.
Always select the lowest required
temperature. Higher temperature
means higher power consumption.
For further program details, see
“Program Selection Table”
C
C
• Xpress Super Short
You can use this program to quickly
wash a small number of lightly soiled
and unstained cotton garments. E.g.:
bathrobes, duvet covers, sport wear, daily
clothes and etc. used only once.
• Freshen Up
You can use “Refreshing” program to
remove odors from laundry that are used
only for once and do not have any spots or
dirt on them.
• Darkcare
Use this programme to wash your dark
coloured laundry, or the coloured laundry
that you do not want them get faded. This
programme washes your laundry with
low mechanical movements and at low
temperature. We recommend you to use
liquid detergent or woolen shampoo for
dark coloured laundry.
• Eco clean 20
You can use this program, which is more
sensitive to environment and natural
resources, to wash lightly soiled and
unspotted cotton laundry (max 3.5 kg)
in a short time and economical way. It is
suggested to use liquid or gel washing
detergents.
• Mix
You can use this program to wash cottons
and synthetics together. There is no need
to sort them.
• Self Clean
It is suggested to run this program with
certain intervals (e.g. once in 1 or 2 months)
for the self-cleaning of your machine. This
program must certainly be run without any
laundry in the machine. Make sure that
the machine is empty before starting the
program. For more effective cleaning, you
can run the program by adding powder
lime remover for washing machines into
compartment II of the detergent drawer.
After the program is completed, leave
• Duvet
You can also wash your machine-
washable fiber duvets with this program.
You must not load more than 1 piece
of fiber duvet for two persons.
C
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
the door ajar to allow the inside of the
machine get dry.
40˚C
30˚C
Cold
Blended clothes including synthetics
and woolens as well as delicates.
This is not a program for washing
laundry. This is a maintenance
program for the machine.
C
Economy Symbol
Shows energy saving programs and
temperature selections.
As “Intensive” and “Hygiene” programs are
long programs with higher temperature
selections to ensure hygiene, “Economy”
Symbol will not light up.
Never use this program if there is
something in your machine.
When this feature is started your
machine senses the load inside of it
automatically, if any, and interrupts the
program.
C
C
Special programs
For specific applications, select any of the
following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
• Spin + Drain
This program spins with maximum
possible rpm in the default setting after the
water drains from the machine.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
Use a lower spin speed for delicate
laundries.
C
Temperature selection
Whenever a new program is selected, the
temperature anticipated for that program
appears on the temperature indicator .
To change the temperature, press
the temperature button. Temperature
decreases in 10° increments.
Cold selection is shown with “-” symbol.
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent your
clothes become wrinkled when there is no
water in the machine. With this function,
your laundry is kept in the final rinsing
water. If you want to spin your laundry
after the rinse hold function:
When the “Temperature” button is pressed
after Cold is selected, the maximum
temperature of the program you have
selected will be displayed.
To decrease the temperature, press the
“Temperature” button again.
-
Adjust the spin speed.
-
Press “Start/Pause/Cancel” button.
Program resumes. Your machine
drains the water and spins your
laundry.
Normally soiled, white cottons and
90˚C linens. (Ex.: coffee table covers,
tablecloths, towels, bed sheets)
Normally soiled, fade proof colored
linens, cottons or synthetic clothes
60˚C (Ex.: shirts, nightgowns, pajamas)
and lightly soiled white linen clothes
(Ex.: underwear)
You can use no spin function in order to
drain the water without spinning at the end
of the program.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Program and consumption table
EN
2
Auxiliary functions
Selectable
temperature range
°C
Programme (°C)
Cottons
Cottons
Cottons
Babycare
Cotton Economic
Cotton Economic
Synthetics
Synthetics
Eco Clean
Mix
90
60
40
90
60**
40
9
9
9
9
9
9
4
4
87 2.7 1600
85 1.8 1600
•
•
•
•
•
•
•
•
•
*
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
90-Cold
90-Cold
90-Cold
90-30
60-Cold
60-Cold
60-Cold
60-Cold
20
85
1
1600
80 2.7 1600
66 1.35 1600
80 0.95 1600
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
60
40
55
1
1000
55 0.52 1000
20 3.5 45 0.16 1600
40
40
4
-
55 0.62 1000
60 0.6 1000
42 0.1 1400
70 2.02 1400
70 1.2 1400
80 0.3 1400
56 0.3 1000
•
•
•
•
•
40-Cold
60-40
Duvet
Xpress Super Short 30
2
9
9
9
2
•
•
•
•
•
•
•
•
•
•
30-Cold
90-Cold
90-Cold
90-Cold
40-Cold
30-Cold
40-Cold
70
Daily Express
Daily Express
Daily Express
Woollens
Hand wash
Darkcare
90
60
30
40
30 1.5 40 0.25 1000
40
70
-
4
-
95 0.6 1000
110 800
35 0.03 1000
*
*
•
•
Self Clean
2
Freshen Up
2
-
• : Selectable
* : Automatically selected, not cancellable.
** : Energy Label programme (EN 60456)
*** If maximum spin speed of your machine is lower, selection may be made until
maximum spin speed.
- : See program description for maximum load.
The auxiliary functions in the table vary according to the model of your machine.
Water and power consumption and program duration differ from the table subject to
changes in water pressure, water hardness and temperature, ambient temperature,
type and amount of laundry, selection of auxiliary functions, and changes in supply
voltage.
C
C
Program duration will be displayed on the screen of your machine according to your
selection.
C
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Use this function for smaller amounts
Auxiliary functions
or slightly soiled laundries.
Auxiliary Function Selection Buttons
• Rinse Plus
When this function (c) is selected, washing
and rinsing is performed with plenty of
water. “F3” symbol lights up on the display.
• Anti-Creasing
With this function (d), drum movement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level. “F4” symbol lights up on the display.
•
Use this function for delicate laundries
that crease easily.
a
b
c
d
•
Depending on the program, you can
select the desired auxiliary function by
pressing the buttons a, b, c,d.
Select the required auxiliary functions
before starting the program.
Some combinations cannot be
selected together. Ex.: Pre-wash and
Quick Wash.
Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
program table.
C
•
•
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes,
you may use rinse hold function and keep
your laundry in the final rinsing water in
order to prevent them become wrinkled
when there is no water in the machine.
Press “Start/Pause” button after this
process if you want to drain the water
without spinning. Program resumes. Your
machine drains the water and program
completes.
If you want to spin your laundry that you
left in water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains
the water, spins the laundry and program
completes.
•
Symbol of the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and the
last auxiliary function selection will remain
active.
Ex.: If you want to select pre-wash first
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected. (see,
“Program Selection Table”)
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
• Prewash
When you select this function (a), the
display will indicate “F1” symbol.
•
A pre-wash is only worthwhile for
heavily soiled laundry. Without
pre-wash you save energy, water,
detergent and time.
Pre-wash without detergent is
recommended for lace and curtains.
•
• Quick Wash
With this function (b), the wash time is
shortened. “F2” symbol lights up on the
display.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Time delay
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3. Press time delaying button “-” to
decrease the desired time delay.
Program duration after 30 minutes
shall be displayed.
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
4. Press Start/Pause/Cancel Button to
start the program.
2. Set the washing program,
temperature, spin speed and, if
required, select the auxiliary functions.
3. Press “Time delaying” buttons “+” and
“-” to set your desired time delay. The
Time delaying symbol will flash.
4. Press “Start/Pause/Cancel” button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light up.
The “:” in the middle of the displayed
time delay will start to flash.
Starting the Program
1. Press Start/Pause/Cancel button to
start the program.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has started
from will light up.
More laundry may be loaded or taken
•
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol fades
and the washing starts as the program
duration is displayed.
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
At the beginning of each program
•
Changing the delay time
If you want to change the time during the
countdown:
step, the relevant symbol in the series
of symbols will light up and thus, at
the end of the program, all symbols
will remain lit up. The symbol that
lights up at the far right of the series
of symbols indicates the step that is
being carried out.
1. Press “Start/Pause/Cancel” button.
“ : “ in the middle of the screen will
stop flashing. The Standby symbol will
light up. The Time delaying symbol will
flash. The Start Symbol will fade.
2. Press “Time delaying” buttons “+” or
“-” to set your desired time delay.
3. Press “Start/Pause/Cancel” button.
The Time delaying symbol will light
up. The Standby symbol will fade. The
Start symbol will light up.
Pre-wash
When “prewash” auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Main wash symbol will light up to indicate
that the main wash cycle has started.
Rinse
4. The “:” in the middle of the displayed
time delay will start to flash.
Rinse symbol lights up at the beginning of
the rinse step.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
Softener
Softener symbol lights up at the beginning
of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during “Spin” and “Pump”
1. Press “Start/Pause/Cancel” button.
The “:” in the middle of the displayed
time delay will stop flashing.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
special programs.
Door lock
If the machine is not spinning, the
The Door Locked Symbol lights up when
the loading door is locked. This symbol
will flash until the door is allowed to open.
Do not force the door at this stage. This
symbol will fade out as soon as the door is
allowed to open. You may open the door
after the symbol fades out.
•
program may be in rinse hold mode
or the automatic spin correction
system has been activated due to an
excessive unbalanced distribution of
laundry in the machine.
Changing the selections after
Child-proof lock
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
When the “Program selection” button is
brought to the appropriate position, rpm
and temperature data reappear.
Protect the appliance from being tampered
by children by means of the child-proof
lock. In this case, no change can be made
in the running program.
Your machine can be turned on and
off with On/Off button while the child-
proof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
C
Switching the machine to
standby mode
The machine is switched to child-lock by
pressing the 2nd and 4th auxiliary functions
for 3 sec. “C:on” (Child-proof lock is
The machine is switched to standby
mode by pressing “Start/Pause/Cancel”
button momentarily. The Standby symbol
which indicates the machine is in standby
mode lights up and the start symbol that
shows the program has started and is still
continuing fades out.
activated) label appears on the display.ꢀ
The same symbol will also be displayed
whenever any button is pressed while the
machine is child-locked.
F3
F1
To deactivate the child-proof lock, press
the 2nd and 4th auxiliary function buttons
for 3 sec.
“C:OFF” (Child-proof lock is deactivated)
label appears on the screen.
Selecting or canceling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water
level is suitable. The door locked symbol
will light up until the door is suitable for
opening. This symbol will fade out as soon
as the door is allowed to open. Laundry
may be added / taken out by opening the
door.
Ending the program through
canceling
“Start/Pause/Cancel” button is pressed
for 3 seconds to cancel the program.
Start symbol will flash during cancellation.
After cancellation, the symbol of the
corresponding step at which the
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
21
cancellation was made will remain lit and
“End” will appear on the screen.
Program in rinse hold mode
This process is shown with the
flashing Spin Symbol and the lit up
Standby Symbol.
•
If you wish to spin when the machine is in
this mode:
Adjust the spin speed. Press “Start/Pause/
Cancel” button. The program continues,
pumps out the water and spins. The
Standby Symbol fades out and Start
Symbol lights up.
If you want to discharge the water only
without spinning:
Press “Start/Pause/Cancel” button.
The Standby symbol will fade. The
Start symbol will light up. The program
continues and only drains the water.
End of program
When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the start-up
of the program will remain selected. “End”
will appear on the display.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Quick instructions for daily use
Preparation
1. Press “Start/Pause/Cancel” button.
1. Turn the tap on completely. Check that 2. Open the loading door and put in
the hose is connected tightly.
2. Place the laundry in the machine.
3. Add detergent and softener.
Starting
more laundry.
3. Close the loading door.
4. Press “Start/Pause/Cancel” button.
Programme is in rinse hold mode
1. Press the “On/Off” button.
2. Select the Programme and the
temperature.
This process is shown with the
flashing spin symbol and the standby
symbol which is lit up.
C
3. If desired (according to your machine’s If you wish to spin when the machine is in
model):
this mode:
1. Adjust the spin speed.
2. Press “Start/Pause/Cancel” button.
The Programme continues, pumps out
the water and spins.
–
–
–
select any auxiliary function,
adjust the spin speed,
set the time delay,
4. Close the loading door.
5. Press “Start/Pause/Cancel” button.
The display shows the time remaining for
the Programme to complete if time delay
is not set.
The display shows the time remaining for
the Programme to start if the time delay is
set.
3. The standby symbol fades out and the
start symbol lights up.
If you want to discharge the water without
spinning:
1. Press “Start/Pause/Cancel” button.
2. The standby symbol fades out and the
start symbol lights up.
6. Check if the Door Locked Symbol
lights up on the screen.
The Door Locked Symbol will light up if
time delay is not set.
The Door Locked Symbol will fade if time
delay is set.
Cancelling a Programme
3. The Programme continues and only
pumps out the water.
Re-spinning the laundry
The control system for an unbalanced load
can pause the spinning in cases when the
distribution of the laundry in the drum is
not balanced.
1. Press and hold the “Start/Pause/
Cancel” button for about 3 seconds;
the Start symbol will start flashing.
2. The machine can discharge all the
water or can take in water for 3 times
at most to cool down the clothes and
complete discharging process.
Adding more laundry
If you want to re-spin the clothes:
1. Distribute the laundry in your machine
for a balanced load.
2. Select the spin Programme.
3. Adjust the spin speed.
After the Programme is finished
Programme indicator symbols on the
screen will remain lit after the Programme
is finished. “End” will appear on the
screen.
1. Open the loading door and take out
the laundry when the door locked
symbol on the display fades out.
2. Press the “On/Off” button.
3. Turn the water tap off.
This is only possible under the
•
following conditions:
–
C
during time delay,
You may add or remove laundry during
the time delay (until the Programme
starts). At the beginning of a washing
cycle (machine allows adding more
laundry during a future step only if the
water level is low enough to open the
loading door or if the temperature in
the machine is low).
4. Remove any folds in the rubber seal
on the loading door and check for
debris.
5. Leave the loading door and detergent
drawer open to dry.
In order to add laundry after the start-
up of the Programme:
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
23
7
Cleaning and care
Clean the drum with a stainless steel
cleaning agent. Never use steel wool
or wire wool.
Detergent drawer
Remove any powder residue buildup in
the drawer. To do this;
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
Outer cabinet and control panel
When necessary:
•
Wipe the exterior panels of your
machine with soapy water or mild
detergent. Dry it with a soft cloth.
Use only a soft and damp cloth to
clean the control panel.
•
Never use a sponge or scrubbing
material. These will damage the
painted and plastic parts.
C
Inlet water filters
If more than a normal amount of water
and softener mixture starts to gather
in the softener compartment, the
siphon must be cleaned.
C
There is a filter at the end of each water
intake valve at the back side of the
machine and also at the end of each water
intake hose where they are connected to
the tap. These filters prevent the foreign
substances and dirt in the water to enter
into the machine. Filters should be cleaned
as they get dirty.
2. Wash the dispenser drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective
gloves or use an appropriate brush
to avoid touching the residues in the
drawer when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is
in its original location.
The door and the drum
After each wash:
•
Check if there are any foreign
substances in the drum.
Open the hole in the bellow with the
aid of a toothpick if it is clogged.
•
•
•
Close the taps.
Remove the nuts of the water intake
hoses to clean the surfaces of the
filters on the water intake valves with
an appropriate brush.
•
•
If the filters are very dirty, you can pull
them out by means of pliers and clean
them.
Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly
Foreign metal substances in your
machine can cause rust stains. In
such cases:
C
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
under streaming water.
Replace the gaskets and filters
carefully and tighten the hose nuts by
hand.
You can remove the filter cover
by slightly pushing the kick plate
downwards with a screwdriver,
through the gap above the filter cover.
C
•
Draining any remaining water
and cleaning the pump filter
Filter system in your machine prevents
solid items such as buttons, coins and
fabric fibers clogging the pump propeller
during discharging of the washing water.
Thus, a good water discharge is achieved
and the pump life is extended.
3- An emergency drain hose is supplied
with some of our models. Others are not
supplied with this item.
•
If your machine fails to drain the water,
the pump filter may be clogged. You
may have to clean it every 2 years or
whenever it is blocked plugged. Water
must be drained off to clean the pump
filter.
If your product is supplied with an
emergency drain hose, do the following as
shown in the figure below:
In addition, water may have to be drained
off completely in the following cases:
•
•
before transporting the machine (e.g.
when moving house)
when there is the danger of frost
In order to clean the dirty filter and
discharge the water;
1- Disconnect or unplug the machine from
the power supply.
There may be water at 90°C in the
machine. Therefore, the filter must be
cleaned only after the inside water
is cooled down to avoid hazard of
scalding.
A
•
•
Pull out the pump outlet hose from its
housing.
Place a large container at the end of
the hose. Drain the water off into the
container by pulling out the plug at
the end of the hose. If the amount of
water to be drained off is greater than
the volume of the container, replace
the plug, pour the water out, then
resume the draining process.
After draining process is completed,
replace the plug into the end of the
hose and fit the hose back into its
place.
2- Open the filter cap. The filter cap
may be composed of one or two pieces
according to the model of your machine.
If it is composed of two pieces, press the
tab on the filter cap downwards and pull
the piece out towards yourself.
•
If your product is not supplied with an
emergency drain hose, do the following as
shown in the figure below:
If it is composed of one piece, hold it from
both sides and open it by pulling out.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
25
•
•
Place a large container in front of the
filter to receive water flowing from the
filter.
Loosen pump filter (anticlockwise) until
water starts to flow out of it. Direct the
flowing water into the container you
have placed in front of the filter. You
can use a piece of cloth to absorb any
spilled water.
•
•
•
When there is no water left, turn the
pump filter until it is completely loose
and remove it.
Clean any residues inside the filter
as well as fibers, if any, around the
propeller region.
If your product has a water jet feature,
be sure to fit the filter into its housing
in the pump. Never force the filter
while replacing it into its housing.
Fit the filter fully into its housing;
otherwise, water may leak from the
filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
into their positions and pushing the upper
part of it.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
26
8
Solution suggestions for problems
Cause
Explanation / Suggestion
Programme cannot be started or selected.
Machine may have switched to self
protection mode due to an infrastructure
problem (such as line voltage, water
pressure, etc.).
Bring your machine to factory settings by turning
the Programme selection knob. (see, Ending the
Programme through Cancelling)
Water in the machine.
There may be some water in your machine
when you receive it. This is from the quality
control process and is normal.
It is not harmful to your machine.
There is water coming from the bottom of the machine.
- Make sure that the seals of the water inlet hoses
are securely fitted.
There might be problems with hoses or the
pump filter.
- Tightly attach the drain hose to the tap.
- Make sure that the pump filter is completely
closed.
Machine does not fill with water
- Tap may be turned off.
- Open the inlet water taps fully.
- Flatten the water intake hose.
- Clean the water intake filter.
- Close the loading door.
- Water inlet hose might be bent.
- Water inlet filter might be clogged.
- The loading door may be ajar.
Machine does not discharge water.
- Water outlet hose might be clogged or
twisted.
- Pump filter may be clogged.
- Clean or flatten the hose.
- Clean the pump filter.
Machine vibrates or shakes.
- Machine feet might not be adjusted.
- Transportation safety bolts might have not
been removed.
- Adjust the machine feet.
- Remove the transportation safety bolts.
- Add more laundry to the machine.
- Reduce the amount of laundry in the machine or
balance the load by hand.
- There may be a small amount of laundry in
the machine.
- The machine may be overloaded or the
clothes may be distributed unevenly.
- There machine might be touching a solid
surface.
- Ensure that nothing touches the machine.
Machine stops shortly after the Programme starts.
Machine can stop temporarily due to low
voltage.
It will resume operating when the voltage is back to
the normal level.
The water being taken in is directly discharged.
Connect the water draining hose as described in
the operation manual.
Improper position of the drain hose.
No water can be seen in the machine during washing.
This is not a problem. The water level is not
visible from the outside of the machine.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
27
The door is jammed.
- Water level might be above the lower level
of the door.
- Machine might be heating up the water or - Run either the “Pump” or “Spin” Programme.
it may be at the spinning cycle.
- Wait until the process is over.
- Wait until the process is over.
- Due to an electrical mechanism, the door
can only be opened a few minutes after the
Programme has stopped.
Machine fills with water when a process is cancelled.
For safety reasons cold water is added to cool the
hot wash load
Inside of machine may be hot.
It continuously spins. Remaining time does not count down. (On models with display)
- The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
- The laundry in the drum may be clustered
There may be an imbalance of laundry in the
(bundled laundry in a bag). Laundry should be
machine.
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Washing time takes longer than the time specified in the manual
- The machine will wait until there is sufficient
amount of water, which will lengthen the washing
time to avoid poor washing results due to
insufficient water.
- Washing time is extended to avoid poor washing
results when the supply voltage is low.
- Cycle time is extended to heat up the water when
- Water pressure may be low.
the input water is cold. Also, washing time can be
- Supply voltage may be low.
lengthened to avoid poor washing results.
- Input temperature of water may be low.
- The automatic spin correction system might have
- There may be an imbalance of laundry in
been activated due to the unbalanced distribution
the machine.
of the laundry in the drum.
- Number of rinses and/or amount of rinse
- The laundry in the drum may be clustered
water might have increased.
(bundled laundry in a bag).
- Laundry should be rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Water amount is increased to obtain a better
rinse and a rinse cycle is added when necessary.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
It continuously washes. Remaining time does not count down.
- The machine will wait until there is sufficient
amount of water to avoid poor washing results due
to lack of water. Then the timer will start to count
down.
- Time will not count down until the selected
temperature for the Programme is attained.
- The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
In the case of a paused countdown while
taking in water:
- Timer will not countdown until the machine
is filled with the correct amount of water. (On
models with display)
- Time might have gotten stuck during
heating step. (On models with display)
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
In the case of a paused countdown at the
spinning step:
There may be an imbalance of laundry in the
machine. (On models with display)
It did not spin.
- The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- There may be an imbalance of laundry in
the machine. Therefore, the Programme
might have been completed without
spinning.
- The machine will not spin if the water has
not completely drained.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Check the filter.
- Check the drain hose.
Washing performance is poor: Laundry turns grey
- Use the recommended amount of detergent
- Using insufficient amount of detergent for
a long time,
appropriate for water hardness and the laundry.
- Select the proper temperature for the laundry to
be washed.
- Washing at low temperatures for a long
time,
- If the water hardness is high, using an insufficient
amount of detergent can cause laundry to turn
grey over time.
- It is difficult to eliminate such greyness once it
occurs.
- Using insufficient amount of detergent for
hard waters (soil can stick to the laundry),
- Using excessive amount of detergent
(detergent can stick to the laundry).
Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not be
whitened.
- Use recommended amount of detergent
- Insufficient amount of detergent used.
appropriate for the laundry.
- Excessive laundry loaded into machine
- Do not load the machine in excess.
- Wrong Programme and temperature might
- Select the proper Programme and temperature
have been selected.
for the laundry to be washed.
- Improper detergent may have been used.
- Put the detergent in the correct compartment.
- Wrong type of detergent used.
- Do not mix detergent with bleaching agents.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
29
- Washing performance is poor: Oily stains appear on laundry.
- Washing performance is poor: Bad odour
- Such odours and bacteria layers are formed on
the drum as a result of continuous washing at
lower temperatures and/or in short Programmes.
- Oily accumulations on the drum may have - Leave the detergent dispenser drawer as well
stuck to the laundry.
as the loading door of the machine ajar after each
- Oily accumulations on the drum may have washing. Thus, a humid environment favorable for
stuck to the laundry.
bacteria cannot be created inside the machine.
- Machine must be operated empty either at
60°C or 90°C Programme with detergent every 6
months.
Colour of the clothes faded.
- Do not load the machine in excess
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- Select the proper Programme and temperature
according to the type and soiling degree of the
laundry.
- Excessive laundry loaded into machine.
- Detergent may have gotten damp.
- A higher temperature might have been
selected.
It does not rinse well.
- Store detergent in a closed and dry location. Do
not keep them under high temperatures.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
- The amount, brand and storage conditions can take this detergent during rinsing or softener
of the detergent used might not be
appropriate.
step.
- Check the filter.
- Detergent might have been put in the
wrong compartment.
- Check the drain hose.
- There may be an imbalance of laundry in the
machine.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- Machine filter may be clogged.
- Drain hose may be folded.
- Intermediate spins may be skipped.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Clothes stiffened.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Insufficient amount of detergent used.
- The detergent may have been placed into
the wrong compartment; the detergent may
be mixed with the softener.
- Do not mix the softener with detergent when
putting in the compartment.
- Wash and clean the drawer with hot water.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Clothes do not smell like the softener.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Insufficient amount of detergent used.
- The detergent was placed into the wrong
compartment; the detergent was mixed with
the softener.
Do not mix the softener with detergent when
putting in the compartment.
Wash and clean the drawer with hot water.
Detergent residue in the dispensing drawer.
- Dry the detergent drawer before putting in
detergent.
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- The detergent dispenser outlet (holes) may have
a problem.
- There might be problems with the detergent
dispenser valves.
- Do not mix the softener with detergent when
putting in the compartment.
- Detergent may have been put in wet
dispenser drawer.
- Detergent may have gotten damp.
- Water pressure might be low
- The detergent in the main wash
compartment might have gotten wet while
taking in the prewash water..
- Detergent might be mixed with the
bleaching agent.
There is detergent left on the laundry.
- Excessive laundry loaded into machine.
- Do not load the machine in excess.
- Wrong Programme and temperature might - Select the proper Programme and temperature
have been selected.
- Wrong detergent may have been used.
for the laundry to be washed.
- Use wool detergents for woollens.
There is too much foam
- Use only automatic washing machine detergents
in your washing machine.
.
- You may not be using proper detergent for - Use only sufficient amount of detergent.
automatic washing machines.
- Use only sufficient amount of detergent.
- Store detergent in a closed and dry location.
- Do not store in excessively hot places.
- Use smaller amounts of detergent for lace items.
- If you put detergent in the prewash
- Excessive amount of detergent may have
been used.
- Too much detergent may have been used
for a small amount of lightly soiled laundry.
- Detergent may have been stored improperly. compartment although you have not selected
- Type of material being washed (lace items
will cause excessive foam due to their
meshed structure).
a prewash cycle, the machine can take this
detergent during rinsing or softener step.
- Too much softener was put in.
- Detergent might have been put in the wrong The detergent dispenser is problematic. Water
compartment.
- Softener being released early.
is siphoned (pulling the softener into the washer
early) during the fill or rinse cycles.
Valves are problematic.
There is foaming over the detergent drawer
Mix 1 tablespoonful softener and ½ liter water
and pour into the main wash compartment of the
detergent drawer.
Too much detergent was used
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Machine does work. Nothing is displayed on the screen.
The plug might not be plugged in the mains
outlet.
Check the plug.
Fuse may have blown.
Electricity may be cut off.
The “On/Off” button might have not been
pressed.
The machine did not start after the program was selected and the «Start/Pause/Cancel» button was
pressed.
Check the fuse.
Check the supply power.
Press this button.
The front door may be ajar.
The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your
machine, water cut-off symbol may light up too)
You can restart your machine by pressing the «Start/
Water may have been cut off.
Pause/Cancel» button for a short time after ensuring
that the water is not cut off.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|