Automatic
washing machine
WM 6143 S
WM 6133 W
WM 6143 W
WM 6133 S
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Time delay. . . . . . . . . . . . . . . . . . . . .19
Starting the Program . . . . . . . . . . . . .20
Progressing a program . . . . . . . . . . .20
Changing the program after the program
has started . . . . . . . . . . . . . . . . . . . .20
Child-proof lock. . . . . . . . . . . . . . . . .21
Ending the program
1 Your Washing Machine
4
Overview . . . . . . . . . . . . . . . . . . . . . . .4
Specifications . . . . . . . . . . . . . . . . . . .5
2 Warnings
6
General Safety. . . . . . . . . . . . . . . . . . .6
First Use . . . . . . . . . . . . . . . . . . . . . . .6
Intended use . . . . . . . . . . . . . . . . . . . .6
Safety instructions . . . . . . . . . . . . . . . .6
If there are children in your house... . . .7
Electrical connection . . . . . . . . . . . . . .7
through canceling . . . . . . . . . . . . . . .21
End of program . . . . . . . . . . . . . . . . .21
6 Quick instructions
for daily use
22
24
3 Installation
9
7 Cleaning and care
Removing packaging reinforcement. . .9
Opening the transportation locks. . . . .9
Appropriate installation location . . . . . .9
Adjusting the feet. . . . . . . . . . . . . . . . .9
Connecting to the water supply. . . . .10
Connecting to the drain . . . . . . . . . . .10
Electrical connection . . . . . . . . . . . . .11
Destroying the packaging material. . .11
Disposing of the old machine. . . . . . .11
Detergent drawer. . . . . . . . . . . . . . . .24
The door and the drum . . . . . . . . . . .24
Outer cabinet and control panel. . . . .24
Inlet water filters. . . . . . . . . . . . . . . . .24
Draining any remaining water and
cleaning the pump filter . . . . . . . . . . .25
8 Troubleshooting
9 Guarantee
27
33
34
4 Initial preparations
for washing
12
10 Service
Sorting the laundry . . . . . . . . . . . . . .12
Preparing clothes for washing . . . . . .12
Correct load capacity . . . . . . . . . . . .13
Loading door. . . . . . . . . . . . . . . . . . .13
Detergents and softeners . . . . . . . . .13
5 Selecting a Program and
Operating Your Machine
15
Control panel. . . . . . . . . . . . . . . . . . .15
Turning the machine on. . . . . . . . . . .16
Program selection . . . . . . . . . . . . . . .16
Spin Speed selection. . . . . . . . . . . . .17
Program selection and consumption
table . . . . . . . . . . . . . . . . . . . . . . . . .18
Auxiliary functions . . . . . . . . . . . . . . .19
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
3
1 Your Washing Machine
Overview
�
�
�
�
�
�
1 - Detergent Drawer
2 - Door
4 - Control Panel
5 - Filter Cap
3 - Top Lid
6 - Height-adjustable feet
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
4
Specifications
Models
WM6143S WM6133W WM6143W WM6133S
Maximum dry laundry capacity (kg)
Height (cm)
6
6
6
6
84
60
50
65
84
60
50
65
84
60
50
65
84
60
50
65
Width (cm)
Depth (cm)
Net Weight (kg)
Electricity (V/Hz.)
Total Current (A)
Total Power (W)
Spinning cycle (rpm max.)
230 V / 50Hz
10
10
10
10
2200
1400
1300
1400
1300
Specifications of this appliance may change without notice to improve the quality of
the product. Figures in this manual are schematic and may not match your product
exactly.
Values stated on the machine labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, values may vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
EN
2 Warnings
Please read the following information.
Otherwise, there may be the risk of
personal injury or material damage.
Moreover, any warranty and reliability
commitment will become void.
First Use
• To prepare your machine for
washing, carry out your first washing
process without loading your
machine and with detergent under
“Cottons 90°C” program.
General Safety
• Ensure that the cold water
• Never place your machine on a
carpet covered floor. Otherwise,
lack of airflow from below your
machine may cause electrical parts to
overheat. This may cause problems
with your washing machine.
connections has been made correctly
when installing your machine.
• If the current fuse or circuit breaker is
less than 15 Amperes, please have
a qualified electrician install a 15
Ampere fuse or circuit breaker.
• To make your machine ready for use,
please be sure that the tap water
supply and water drainage systems
are appropriate before calling the
authorized service. If they are not,
call a qualified plumber to have any
necessary arrangements carried out.
• If the power cable or mains plug is
damaged you must call Authorized
Service for repair.
• Check water hoses for wear. Do not
use old/used water inlet hoses. These
may cause stains on your laundry.
• Fit the drain hose into the waste
water system securely to prevent any
water leakage and to allow machine
to take in and discharge water as
required. It is very important that the
water intake and drain hoses are not
folded, squeezed, or broken when
the appliance is pushed into place
after it is installed or cleaned.
Intended use
• This product has been designed for
home use.
• The appliance may only be used for
washing and rinsing of textiles that
are marked accordingly.
• Only detergents, softeners and
supplements suitable for washing
machines may be used.
• Your washing machine is designed to
continue operating when the power
restores after a power interruption.
You cannot cancel any program by
pressing the “On/Off button.” The
machine will resume its program
when the power restores. Press the
“Start/Pause/Cancel” button for 3
seconds to cancel the program (See,
Cancelling a Program)
• There may be some water in your
machine when you receive it. This is
from the quality control process and
is normal. It is not harmful to your
machine.
• Some problems you may encounter
may be caused by the software.
Press “Start/Pause/Cancel” button
for 3 seconds to cancel the program
set in your machine before calling the
authorized service.
• Observe the care instructions labelled
on textile products and any other
instructions given by companies that
produce detergents for your machine.
Safety instructions
• This appliance must be connected to
an earthed outlet protected by a fuse
of suitable capacity.
• The supply and draining hoses must
always be securely fastened and
remain in an undamaged state.
• Fit the draining hose to a washbasin
or waste system securely before
starting up your machine. There may
be a risk of being scalded due to high
washing temperatures!
• Never open the door or remove the
filter while there is still water in the
drum. Otherwise, there may be the
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
6
risk of flooding and possible injury
due to the hot water.
• Never force open the locked door!
The door will be ready to open just a
few minutes after the washing cycle
comes to an end.
• Unplug the machine when it is not in
use.
• Never wash down the appliance
with a water hose! There is the risk
of electric shock! Always disconnect
from the mains by unplugging before
cleaning.
equivalent current rating indicated on the
rating plate at the front of the machine
behind the kick plate.
After removing the plug from its transit
position, please insert the plug seal
to prevent water spillage entering the
machine.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
• Never touch the plug with wet hands. We recommend that this appliance be
Never unplug by pulling on the cable, connected to the mains supply via a
always pull out from the plug only. Do suitable switched and fused socket in a
not operate the machine if the power
cord or plug is damaged.
readily accessible position.
Should the mains lead of the appliance
become damaged or need replacing
at any time, it must be replaced by a
special purpose made mains lead which
can only be obtained from a Authorised
Service Agent.
• Never attempt to repair the machine
yourself. Otherwise, you may be
putting yours and other’s lives in
danger.
• For malfunctions that cannot be
solved by information in the operating
manual:
This appliance must be earthed
B
Turn off the machine, unplug it, turn
off the water tap and contact an
authorized service agent.
If the fitted moulded plug is not suitable
for your socket, then the plug should be
cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must
be used. Do not forget to refit the fuse
cover. In the event of losing the fuse
cover, the plug must not be used until a
replacement fuse cover has been fitted.
Colour of the replacement fuse cover
must be the same colour as that visible
on the pin face of the plug. Fuse covers
are available from any good electrical
store.
If there are children in your
house...
• Electrical appliances may be
dangerous for the children. Keep
children away from the machine when
it is operating. Do not let them tamper
with the machine.
• Close the door when you leave the
area where the machine is located.
• Store all detergents in a safe place
out of reach of the children.
Electrical connection
Make sure that you have an earthed
power outlet socket rated at 13 amps
(minimum).
Attention!
If you use your machine as built-in,
the socket must be reachable after
installation, or a separate switch (which
can disconnect the two poles) must be
used in the installation.
Connect the power cord to the
appropriate electrical socket with an
Important
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
proceed as follows:
1 Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or
coloured green and yellow or green.
2 Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
3 Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
8
3 Installation
3. Fit the covers (supplied in the bag
with the Operation Manual) into the
holes on the rear panel. (“P”)
Removing packaging
reinforcement
Tilt the machine to remove the
packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
C Keep the transportation safety bolts
in a safe place to reuse when the
washing machine needs to be moved
again in the future.
C Never move the appliance without the
transportation safety bolts properly
fixed in place!
Appropriate installation
location
Opening the transportation
locks
Install the appliance in environments
which have no risk of freezing, in a
stable and level position.
C Transportation safety bolts must
be removed before operating the
washing machine! Otherwise, the
machine will be damaged!
C The floor must be capable of carrying
the load on it!
C If the washing machine and a drier
are placed on top of each other, their
approximate weight together may
reach 180 kg when they are full.
Important:
1. Loosen all the bolts with a spanner
until they rotate freely (“C”)
• Do not place the appliance on top of
the power cable.
• Keep at least 1cm distance from the
edges of other furniture.
• Place the machine on a firm surface;
do not position it on a long pile rug or
such like surfaces.
2. Remove transportation safety bolts
by turning them gently.
Adjusting the feet
C Do not use any tools to loosen the
lock nuts. Otherwise, they can be
damaged.
1. Manually (by hand) loosen the lock
nuts on the feet.
2. Adjust them until the machine stands
level and firm.
3. Important: Tighten all lock nuts up
again.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
after checking the seal. To prevent
any water leakage and any other
damage to be caused by it, keep the
taps closed when the machine is not
in use.
Connecting to the water
supply.
Important:
• The water supply pressure required
to run the machine must be 1-10
bar (0,1 – 1 MPa). (Practically, it is
necessary to have 10 – 80 liters
of water flowing from the tap in
one minute to have your machine
run smoothly.) Attach a pressure-
reducing valve if the water pressure is
higher.
• Models with a single water inlet
should not be connected to the hot
water tap. Laundry may be damaged
or the appliance may switch to
protection mode and not work.
• Connect the special hose supplied
with the machine to the water intake
valves on the machine.
When returning the appliance to its
place after maintenance or cleaning,
care should be taken not to fold,
squeeze or block the hoses.
Connecting to the drain
The water discharge hose can be
attached to the edge of a washbasin
or waste water system. The drain hose
should be firmly fitted into the drain as
to not loosen in its housing.
• In order to prevent water leakage that
may occur at the connection points,
there are rubber seals (4 seals for the
models with double water inlet and
2 seals for other models) attached
to the hoses. These seals should
be used at the tap and machine
connection ends of the hoses. The
plain end of the hose fitted with a filter
must be attached to the tap and the
elbowed end must be attached to the
machine. Tighten the nuts of the hose
well by hand; never use wrenches to
tighten the nuts.
• Open the taps completely after
making the hose connection to check
if there is any water leakage at the
connection points. Turn off the tap
and remove the nut in case of any
leakage. Retighten the nut carefully
Important:
• The end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The
fitting must be secured in all types
of connections. Your house may
be flooded if the hose falls out of its
housing during water discharging.
• The hose should be attached to a
height of at least 40 cm, and 100 cm
at most.
• In case the hose is elevated
after laying it on the floor level or
close to the ground (less than
40 cm above the ground), water
discharge becomes more difficult
and the laundry may come out wet.
Therefore, the heights described in
the figure should be followed.
• To prevent dirty water refilling the
Download from Www.Somanuals.com. All Manuals Search And Download.
10 EN
machine, and to allow for easy
discharge, the end of the hose must
not be submerged in the drain water.
The end of the hose must be able
to take in air. The hose should be
pushed into the drainage for more
than 15 cm. If it is too long you may
have it shortened.
BThe appliance must not be operated
whilst faulty until it as been repaired!
There is the risk of electric shock!
Destroying the packaging
material
Packaging material can be dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to waste
directives. Do not dispose of them
together with normal domestic waste.
Packaging materials of your machine are
manufactured from recyclable materials.
Disposing of the old machine
Dispose of your old appliance in an
environmental friendly manner.
• You may refer to your local agent or
solid waste collection center in your
municipality to learn how to dispose
of your machine.
Before disposing of your old washing
machine, cut off the mains plug and
make the door lock unusable.
• The end of the hose should not be
bent, it should not be stepped on and
it must not be folded between the
drain and the machine.
• The length of the hose is too short,
you may add an extension hose to
the original section. The length of the
hose must not be longer than 3.2
m after coming out of the machine.
To avoid water leakage failures, the
connection between the extension
hose and the drain hose of the
product must be fitted well with an
appropriate clamp as not to come off
and leak.
Electrical connection
Connect the machine to an earthed
outlet protected by a fuse of suitable
capacity.
Important:
• Connection should comply with
national regulations.
• Power cord plug must be within easy
reach after installation.
• The voltage and the allowed fuse
protection are specified in the section
“Technical Specifications”.
• The specified voltage must be equal
to your mains voltage.
• Connection via extension cords or
multi-plugs should not be made.
BA damaged power cable must be
replaced by a qualified electrician.
Download from Www.Somanuals.com. All Manuals Search And Download.
11 EN
4 Initial preparations for washing
Sorting the laundry
• Sort the laundry according to type
of fabric, color, and degree of soiling
and permissible water temperature.
Always follow the advice on the
garment labels.
Non machine
washable
Washing water
Wash with
Do not wash
temperature sensitive, short
programs.
• Empty pockets and remove all foreign
objects such as coins, pens and
paper clips. If possible, turn pockets
out and brush.
• Place small items like infants’ socks
and nylon stockings, etc. in a laundry
bag, pillow case or something similar.
This will also save your laundry from
getting lost.
Bleach can be Do not use
Dry-cleanable
Do not
used
bleach
dry-clean
• Place curtains in the machine with
care. Remove curtain rails and
pullers.
Suitable for
drier
Do not dry
with drier
Dry
horizontally
Dry on a
hanger
• Fasten zippers, sew loose buttons
and mend rips and tears.
• Wash “machine washable” or “hand
washable” labelled products only with
an appropriate program.
• Do not wash colours and whites
together. New, dark coloured cottons
may release a lot of dye. Wash them
separately.
Hang without Can be ironed
Can be
Do not iron
spinning
with hot iron ironed with
warm iron
Preparing clothes for washing
Laundry items with metal attachments
such as, bras, belt buckles and metal
buttons will damage the machine.
Remove metal attachments or place the
items in a clothing bag, pillow case, or
something similar.
• Tough stains must be treated
properly before washing. If you are
not sure, check with a dry cleaner.
• Use only dyes/colour changers and
lime removers suitable for machine
wash. Always follow the instructions
on the packaging.
• Wash trousers and delicate clothes
turned inside out.
• Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce
pilling.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 EN
- (I) for prewash
- (II) for main wash
- (III) siphon
Correct load capacity
• The maximum load capacity depends
on the type of laundry, the degree of
soiling and the washing program you
wish to use.
– ( ) for softener
The machine adjusts the amount of
water according to the amount of
laundry placed inside.
C
Please follow the information in the
"Program Selection Table". Washing
results will degrade when the
machine is overloaded.
C
Detergent, softener and other
cleaning agents
Add detergent and softener before
starting the washing program.
Never open the detergent dispenser
drawer while the washing program is
running!
When using a program without pre-
wash, no detergent should be put
into the pre-wash compartment
(Compartment no. I).
A program without pre-wash should
be selected if a detergent bag or a
dispensing ball is going to be used.
You can place the detergent bag or
the dispensing ball directly among the
laundry in your machine.
Following weights are given as
examples.
Laundry type
Bathrobe
Napkin
Weight (gr.)
1200
100
700
500
200
250
200
200
100
600
200
500
100
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pyjamas
Blouse
Choosing the detergent type
The type of detergent to be used
depends on the type and colour of
fabric.
• Use different detergents for coloured
and white clothes.
• Wash woolens with a special
detergent specifically for woolens.
• Use only detergents manufactured
specifically for washing machines.
Loading door
The door is locked during program
operation. The door can be opened after
some time following the program end.
• Open the door.
• Place laundry items loosely in the
machine.
• Push the door until it clicks into place
tightly. Ensure that no items are
caught in the door.
Detergent quantity
The amount of washing detergent to
be used depends on the amount of
laundry, the degree of soiling and water
hardness.
Detergents and softeners
Detergent drawer
The detergent drawer is composed of
three compartments:
• Do not use amounts exceeding
the quantities recommended on
the package to avoid problems of
The detergent dispenser may be in two
different types according to the model of
your machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
13 EN
excessive foam, poor rinsing, financial • Never use fabric softener and starch
savings and finally, environmental
protection.
together in the same washing cycle.
• Wipe the inside of the drum after
using starch.
• Use small amounts of detergent at a
suitable measure for small amounts
of laundry or for only slightly soiled
laundry.
Eliminating lime formation
• When required, use only appropriate
lime removers developed specifically
for washing machines and always
follow the instructions on the
package.
• Use exact measures for highly
concentrated detergents.
Detergent
quantity
for prewashing
for main washing
1/2 measure
1 measure
an additional 1/2
measure
with hard water
Softener
Put the softener into the softener
compartment of the detergent
dispenser.
• Use the proportions recommended
on the packet.
• Never exceed the (> max <) level
marking; otherwise, the softener will
be wasted without being used.
• If the softener has lost its fluidity,
dilute dense softener with water
before placing it in the detergent
drawer.
Liquid detergent
When using liquid or gel washing
detergents, please note the following:
• The liquid detergent may leave stains
on your laundry if time delay feature is
selected.
• Do not use liquid detergent if you
want to wash using the time delay
feature.
• Do not use liquid detergent for the
main wash in a cycle with pre-wash.
• Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Starch
• Add liquid starch, powder starch
or the dyestuff into the softener
compartment as instructed on the
package.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 EN
5 Selecting a Program and Operating Your Machine
Control panel
Figure 2
6
5
7
9
8
1
3
1 - On / Off Button
2 - Temperature Adjustment Knob *
3 - Program Follow-up Indicator *
4 - Child-proof Lock Indicator *
5 - Spin Speed Adjustment Knob *
6 - Program Selection Knob
7 - Time Delaying Button *
8 - Auxiliary Function Keys
9 - Start/Pause/Cancel Button
* According to your machine’s model
Download from Www.Somanuals.com. All Manuals Search And Download.
15 EN
temperature. Higher temperature
means higher power consumption.
C For further program details, see,
“Program Selection Table”
Turning the machine on
Prepare the machine for program
selection by pressing the “On/Off”
button. When “On/Off” button is
pressed, “Ready” light illuminates
indicating that the door is ready to be
opened. Press the “On/Off” button again
to shut down the machine.
C Pressing the “On/Off” button does not
necessarily mean the program has
started. Press “Start/Pause/Cancel”
button to allow the machine start the
program.
Main programs
Depending on the type of textile, the
following main programs are available:
•Cottons
You can wash your durable clothes with
this program. Washes with vigorous
washing movements in a longer
washing cycle. It is recommended for
your cotton items (such as bed sheets,
duvet and pillowcase sets, bathrobes,
underclothing, etc.).
Program selection
Select the appropriate program from the
program table and the following washing
temperature table according to type,
amount and degree of soiling of the
laundry. Select the desired program with
the program selection button.
•Synthetics
You can wash your less durable clothes
on this program. Washes with gentler
washing movements and in shorter
washing cycles. It is recommended for
your synthetic clothes (such as shirts,
blouses, synthetic/cotton blended
garments, etc.). For curtains and lace,
using the “Synthetic 40” program with
pre-wash and anti-creasing functions
selected is recommended. Detergent
should not be put in the pre-wash
compartment. Less detergent should be
put in the main wash compartment as
loose knit fabrics (lace) foam too much
due to its meshed structure.
C Each of these main programmes
comprise of a complete washing
process, including washing, rinsing
and, if required, spin cycles.
Normally soiled, white
cottons and linens. (Ex.:
90˚C
60˚C
coffee table covers,
tablecloths, towels, bed
sheets)
•Delicates
Normally soiled, fade proof
colored linens, cottons
or synthetic clothes
(Ex.: shirts, nightgowns,
pajamas) and lightly soiled
white linen clothes (Ex.:
underwear)
You can wash your delicate clothes
on this program. It has more sensitive
washing movements and does not make
intermediate spinning compared to the
synthetic program. It must be used for
clothes for which sensitive washing is
recommended.
•Woollens
For delicate clothes (Ex.:
lace curtains), blended
clothes including synthetics
and woolens.
40˚C
30°C
Cold
You can wash your machine-washable
woolen garments on this program. Wash
by selecting the proper temperature
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woolens.
C Programs are limited with the highest
spin speed appropriate for that
particular type of cloth.
•Hand Wash
C Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature when
choosing a program.
You can wash your woolen/delicate
clothes that bear “not machine-
washable” labels for which hand wash
is recommended on this program. It
washes the laundry with very tender
C Always select the lowest required
Download from Www.Somanuals.com. All Manuals Search And Download.
16 EN
washing movements without damaging
your clothes.
models equipped with an rpm selection
knob. In order to protect your clothes,
your machine will not spin above 800
rpm on synthetic programs and 600 rpm
on woolens program. Furthermore, if
you want to skip the spin cycle and take
your clothes out, turn the rpm selection
knob to “no spin” position.
Additional programs
For special cases, there are also extra
programs available:
CAdditional programs may differ
according to the model of your
machine.
CYou can use no spin function in order
to drain the water without spinning at
the end of the program.
• Baby
Increased hygiene is provided by a
longer heating period and an additional
rinse cycle. It is recommended for baby
clothes and clothes worn by allergic
people.
• Intensive
You can wash your durable and heavily
soiled clothes on this program. This
program washes for a longer time
and an extra rinse cycle will be made
compared to the “Cottons” program.
You can use it for your heavily soiled
clothes that you wish to be rinsed gently.
• Duo
You can use this program to wash
cottons and synthetics together without
needing to sort them.
• Mini
This program is used to quickly wash
a small number of lightly soiled cotton
garments.
Special programs
For specific applications, you can select
any of the following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin
This program spins with maximum
possible rpm in the default setting.
C You should use a lower spin speed
for delicate laundries.
• Pump
This program is used to discharge the
water of the clothes soaked into water in
the machine.
Spin Speed selection
You can have your clothes spun at
the maximum rpm selection on your
machine by using the selection knob in
Download from Www.Somanuals.com. All Manuals Search And Download.
17 EN
Program selection and consumption table
Programme
Cottons
90
60**
40
6
6
130
140
125
160
110
90
54 1.70
49 1.02
49 0.65
85 1.35
55 0.85
55 0.50
57 0.39
50 0.26
35 0.15
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cottons
Cottons
6
Intensive
Synthetics
Synthetics
Delicate
60
6
60
3
•
•
•
•
•
•
•
40
3
40
2
70
Woollens
Hand wash
40
1.5
1
55
30
40
• : Selectable
* : Automatically selected, not cancellable.
**: Energy Label programme (EN 60456)
Water and power consumption and program duration may differ from the table
subject to changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions, and
changes in electric voltage.
C The auxiliary functions in the table may differ according to the model of your
machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 EN
water by pressing the rinse hold button
in order to prevent your clothes become
wrinkled. You can spin by pressing
“Start/Pause/Cancel” button after this
process.
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions
before starting the program.
C Auxiliary function buttons may differ
according to the model of your
machine.
Anti-creasing
This function reduces drum movement
and limits the spinning speed to prevent
creasing. In addition, washing is carried
out at a higher water level.
C Use this function for delicate laundries
that crease easily.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
C Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
For example: If you want to select pre-
wash first and then quick wash, pre-
wash will be cancelled and quick wash
will remain active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see “Program Selection Table”)
Reducing Speed
You may use the speed reduction
button whenever you wish to spin
your clothes below the maximum spin
speed. When speed reduction button
is pressed, spin speed will be at the
minimum rpm given on the panel.
No spin
Pre-wash
You may use this program if you do not
want to spin your clothes at the end of
cottons, synthetics, woolen or delicate
programs.
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and time.
C Pre-wash without detergent is
recommended for lace and curtains.
Less detergent should be put in the
main wash compartment as loose
knit fabrics (lace) foam too much due
to its meshed structure.
Time delay
Applies for models with time delay function
If you wish to wash your clothes at a
later time, with the time delay function
you can delay the program start up 3
hours, 6 hours or 9 hours.
Quick wash
This function can be used for cottons
and synthetics programs. It decreases
the washing times for lightly soiled
laundries and also the number of rinsing
steps. Shortens the program time
approximately 45 minutes.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and, if
required, the auxiliary functions.
3. When the time delaying button is
pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again, 6 hours; and if pressed once
more, 9 hours delay will be selected.
If the time delaying button is pressed
one more time, time delaying function
will be cancelled. Set the time delay
as you require.
Extra rinse
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by
the remainder detergent on the clothes
will be decreased.
Rinse hold
If you do not want to unload your
clothes immediately after the cotton,
synthetics, woolen and delicate fabrics
program, you may release your clothes
inside the machine in the last rinsing
4. Delayed operation of the selected
Download from Www.Somanuals.com. All Manuals Search And Download.
19 EN
program is started by pressing the
“Start/Pause/Cancel” button after
making the time delay selection.
C More laundry may be loaded/
removed during the time delay
period.
C If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of unbalanced distribution of laundry
in the machine.
Changing and canceling the time
delay.
Changing the program after
the program has started
You can use this feature after your
machine has started to wash different
textile groups in the same batch
of clothes under higher or lower
temperatures.
1. Press the “Start/Pause/Cancel”
button to switch the machine to
“Pause” mode.
2. Press “Start/Pause/Cancel” button
to start the program after making the
new time delay selection.
C In the event that any of the lights
of 3-6-9 options does not light up
after selecting the new time delay,
it means that time delay function is
cancelled.
For example;
Press and hold the “Start/Pause/
Cancel” button for 3 seconds to
“Cancel” the program in order to
select “Cottons 40” program instead of
“Cottons 60” program.
Select the “Cottons 40” program by
rotating the program knob.
Press “Start/Pause/Cancel” button to
start the program.
C The program which is selected
first will go on even if the program
selection button is moved and
another program mode is selected
while the machine is operating. You
must cancel the ongoing program
in order to change the washing
program. (See, Canceling a Program)
Starting the Program
1. Press “Start/Pause/Cancel” button to
start the program.
2. “Start/Pause/Cancel” button will light
up to indicate that the program has
started.
3. The door is locked and the “Ready”
light fades.
Progressing a program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will illuminate
and the light of the completed step
will turn off. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried
out.
Selecting or cancelling an auxiliary
function/temperature/spin speed
1. Press the “Start/Pause/Cancel”
button to switch the machine to
“Pause” mode.
2. Change the auxiliary function’s
temperature and spin speed.
3. Press “Start/Pause/Cancel” button to
start the program.
C The selection to be made must be
appropriate. For example, if your
machine is on the main wash cycle,
you may select additional rinse
auxiliary function, but you cannot
select pre-wash.
The “Wash” light on the program follow-
up indicator illuminates when “Start/
Pause/Cancel” button is pressed after
selecting the washing program. “Spin”
lamp will light up at the final spin step.
The “Ready” lamp will light up again
when the program is over and the door
is unlocked.
You can put your machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button when it is operating. In
this case, “Start/Pause/Cancel” light will
flash.
C The spin speed and temperature
which are selected first will keep
on being valid even if the position
of the spin speed or temperature
selection knob is changed. Press
Download from Www.Somanuals.com. All Manuals Search And Download.
20 EN
“Start/Pause/Cancel” button and
switch the machine to “Pause” mode
in order to change the spin speed
or temperature. New spin speed or
temperature can be selected.
new program can be selected or started
after “Program is cancelled” in order to
change the washing program.
To cancel any selected program;
•
Press “Start/Pause/Cancel” button
for 3 seconds. At the end of this
time, “Start/Pause/Cancel” light
and all lights go off and “Spin” lamp
illuminates. If the door is unlocked, all
lights on the indicator will go off and
the “Ready” lamp will illuminate. You
can select and start a new program
when the “Ready” light is lit.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started, put the machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button. The “Ready” lamp on
the program follow-up indicator will light
up after 1-2 minutes if the water level in
the machine is suitable. Laundry may be
added or taken out by opening the door.
If the “Ready” lamp does not light up
continuously at the end of this time, the
water level in the machine is not suitable
and laundry cannot be added. You can
resume the program by pressing the
“Start/Pause/Cancel” button again.
• The machine can drain all the water
or can take in water for 3 times at
most to cool down the clothes and
complete the draining process. Also
the “Spin” light illuminates if the
cancellation process is activated in
the middle of the program. The “Spin”
light goes off when discharging
process is completed. The door can
be opened and a new program can
be selected when the “Lid” lamp
illuminates.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on.
End of program
The “Ready” lamp on the program
follow-up indicator will light up when
the program comes to an end. The
door can be opened and the machine
becomes ready for a second cycle.
Press the “On/Off” button to shut down
the machine.
C Your machine can be turned on and
off with On/Off button while the child-
proof lock is activated. In this case,
your machine will resume its program
with child-proof lock activated.
In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
Download from Www.Somanuals.com. All Manuals Search And Download.
21 EN
6 Quick instructions for daily use
C Machine allows adding more laundry
Preparation
during a later step only if the water
level is low enough to open the
loading door or if the temperature in
the machine is low enough.
In order to add laundry after the start-up
of the program:
1. Turn the tap on completely. Check if
the hoses are connected tightly.
2. Place the laundry in the machine.
3. Add detergent and softener.
Starting
1. Press “Start/Pause/Cancel” button.
Wait until the door is allowed to
open. When the “Ready” lamp is on
continuously, continue to the next
step.
1. Press the “On/Off” button.
2. Select the programme and the
temperature.
3. If required (according to your
machine’s model):
2. Open the loading door and put in
more laundry.
– select any auxiliary function,
– adjust the spin speed,
– set the time delay,
3. Close the loading door.
4. Press “Start/Pause/Cancel” button.
4. Close the loading door.
5. Press “Start/Pause/Cancel” button.
Program is in rinse hold mode
C Clothes may be left to soak in the
machine as long as desired after
filling during the last rinse step. When
it reaches this position while the
machine is running, the “Start/Pause/
Cancel” light will flash.
Canceling a program
•
Press “Start/Pause/Cancel” button
for 3 seconds. At the end of this
time, “Start/Pause/Cancel” light
and all lights go off and “Spin” lamp
illuminates. If the door is unlocked, all
lights on the indicator will go off and
the “Ready” lamp will light. You can
select and start a new program when
“Ready” light illuminates.
If you wish to spin when the machine is
in this mode:
Adjust the spin speed. Press “Start/
Pause/Cancel” button. Program
resumes. Your machine drains the water
and spins your laundry.
If you want to discharge the water
without spinning:
Press “Start/Pause/Cancel” button. The
program continues and only drains
the water.
• The machine can drain all the water
or can take in water for 3 times at
most to cool down the clothes and
complete the draining process. Also
the “Spin” light illuminates if the
cancellation process is activated
in the middle of the program. The
“Spin” light goes off when discharging
process is completed. The door can
be opened and a new program can
be selected when the “Ready” lamp
illuminates.
Re-spinning the laundry
The control system for an unbalanced
load can pause the spinning in cases
when the distribution of the laundry in
the drum is not balanced.
If you want to re-spin the clothes:
1. Rearrange the previously placed
clothes in machine.
Adding more laundry
• This is only possible under the
following conditions:
2. Select the spin program.
– during time delay,
3. Set the spin speed if spin speed
adjustment is available on your
machine.
C You may add or remove laundry
during the time delay (until the
program starts).
4. Press “Start/Pause/Cancel” button.
– At the beginning of a washing cycle,
Download from Www.Somanuals.com. All Manuals Search And Download.
22 EN
After the program is finished
1. “Ready” lamp will light up on the
program follow-up indicator. Open
the loading door and take out the
clothes.
2. Press the “On/Off” button.
3. Turn the water tap off.
4. Eliminate any folding of the rubber
seal on the loading door and check
for impurities.
5. Leave the loading door and detergent
drawer open to dry.
Download from Www.Somanuals.com. All Manuals Search And Download.
23 EN
7 Cleaning and care
such cases:
Detergent drawer
Clean the drum with a stainless steel
cleaning agent. Never use steel wool
or wire wool.
Remove any powder residue buildup in
the drawer. To do this;
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
Outer cabinet and control
panel
When necessary:
• Wipe the exterior panels of your
machine with soapy water or mild
detergent. Dry it with a soft cloth.
• Use only a soft and damp cloth to
clean the control panel.
C Never use a sponge or scrubbing
material. These will damage the
painted and plastic parts.
C If more than a normal amount of
water and softener mixture starts to
gather in the softener compartment,
the siphon must be cleaned.
2. Wash the dispenser drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective
gloves or use an appropriate brush
to avoid touching the residues in the
drawer when cleaning.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is
in its original location.
Inlet water filters
There is a filter at the end of each
water intake valve at the back side of
the machine and also at the end of
each water intake hose where they
are connected to the tap. These filters
prevent the foreign substances and dirt
in the water to enter into the machine.
Filters should be cleaned as they get
dirty.
• Close the taps.
• Remove the nuts of the water intake
hoses to clean the surfaces of the
filters on the water intake valves with
an appropriate brush.
The door and the drum
After each wash:
• Check if there are any foreign
substances in the drum.
• Open the hole in the bellow with the
aid of a toothpick if it is clogged.
• If the filters are very dirty, you can
pull them out by means of pliers and
clean them.
• Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly
C Foreign metal substances in your
machine can cause rust stains. In
Download from Www.Somanuals.com. All Manuals Search And Download.
24 EN
under streaming water.
• Replace the gaskets and filters
carefully and tighten the hose nuts by
hand.
Draining any remaining water
and cleaning the pump filter
Filter system in your machine prevents
solid items such as buttons, coins and
fabric fibers clogging the pump propeller
during discharging of the washing water.
• If your machine fails to drain the
water, the pump filter may be
clogged. You may have to clean
it every 2 years or whenever it is
blocked plugged. Water must be
drained off to clean the pump filter.
In addition, water may have to be
drained off completely in the following
cases:
3- An emergency drain hose is supplied
with some of our models. Others are not
supplied with this item.
If your product is supplied with an
emergency drain hose, do the following
as shown in the figure below:
• before transporting the machine (e.g.
when moving house)
• when there is the danger of frost
In order to clean the dirty filter and
discharge the water;
1- Disconnect or unplug the machine
from the power supply.
AThere may be water at 90°C in the
machine. Therefore, the filter must
be cleaned only after the inside water
is cooled down to avoid hazard of
scalding.
• Pull out the pump outlet hose from its
housing.
• Place a large container at the end of
the hose. Drain the water off into the
container by pulling out the plug at
the end of the hose. If the amount of
water to be drained off is greater than
the volume of the container, replace
the plug, pour the water out, then
resume the draining process.
• After draining process is completed,
replace the plug into the end of the
hose and fit the hose back into its
place.
2- Open the filter cap. The filter cap
may be composed of one or two pieces
according to the model of your machine.
If it is composed of two pieces, press
If your product is not supplied with an
emergency drain hose, do the following
as shown in the figure below:
the tab on the filter cap downwards and
pull the piece out towards yourself.
If it is composed of one piece, hold it
from both sides and open it by pulling
out.
• Place a large container in front of the
Download from Www.Somanuals.com. All Manuals Search And Download.
25 EN
filter to receive water flowing from the
filter.
• Loosen pump filter (anticlockwise)
until water starts to flow out of it.
Direct the flowing water into the
container you have placed in front of
the filter. You can use a piece of cloth
to absorb any spilled water.
• When there is no water left, turn the
pump filter until it is completely loose
and remove it.
• Clean any residues inside the filter
as well as fibers, if any, around the
propeller region.
• If your product has a water jet feature,
be sure to fit the filter into its housing
in the pump. Never force the filter
while replacing it into its housing.
Fit the filter fully into its housing;
otherwise, water may leak from the
filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
into their positions and pushing the
upper part of it.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 EN
8 Troubleshooting
Problem
Cause
Explanation / Suggestion
Machine may have
Program
cannot be
started or
selected.
switched to self
Reset your machine by pressing “Start/Pause/
Cancel” button for 3 seconds. (see, Cancelling a
Program)
protection mode due to
an infrastructure problem
(such as line voltage, water
pressure, etc.).
There may be some water
in your machine when you
receive it. This is from the
quality control process and
is normal.
Water in the
machine.
It is not harmful to your machine.
Be sure the seals of the water inlet hoses are
There is water
coming from
the bottom of
the machine.
securely fitted.
There might be problems
with hoses or the pump
filter.
Tightly attach the drain hose to the waste pipe or
sink.
Make sure that the pump filter is completely
closed.
Tap may be turned off.
Open the inlet water taps fully.
Water inlet hose might be
bent.
Straighten the water intake hose.
Machine does
not fill with
water.
Water inlet filter might be
clogged.
Clean the water intake filter.
Close the door.
The door may be ajar.
Water outlet hose might be
clogged or twisted.
Clean or straighten the hose.
Machine does
not discharge
water.
Pump filter may be
clogged.
Clean the pump filter.
Machine feet might require
adjustment.
Adjust the machine feet.
Transportation safety
bolts might have not been
removed.
Remove the transportation safety bolts.
Add more laundry to the machine.
There may be a small
amount of laundry in the
machine.
Machine
vibrates or
shakes.
The machine may be
overloaded or the clothes
may be distributed
unevenly.
Reduce the amount of laundry in the machine or
balance the load by hand.
There machine might be
touching a solid surface
Ensure that nothing touches the machine.
Machine
stopped
Machine can stop
temporarily due to low
voltage.
It will resume operating when the voltage is back
to the normal level.
shortly after
the program
started.
The water
being taken
in is directly
discharged.
Improper position of the
drain hose.
Connect the water draining hose as described in
the operation manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
27 EN
No water can
This is not a problem. The
be seen in the water level is not visible
machine during from the outside of the
washing.
machine.
Water level might be above
the lower level of the door.
Run either the “Pump” or “Spin” program.
Machine might be heating
up the water or it may be at Wait until the process is over.
the spinning cycle.
The door is
jammed.
Due to electrical safety
mechanism, the door can
only be opened a few
minutes after the program
has stopped.
Wait until the process is over.
Machine fills
with water
Inside of machine may be
For safety reasons, water should be cycled in and
out a couple times.
when a process hot.
is cancelled.
The machine will wait until there is a sufficient
amount of water, which may lengthen the
washing time to avoid poor washing results due to
insufficient water.
Water pressure may be
low.
Washing time is lengthened to avoid poor washing
results when the supply voltage is low.
Supply voltage may be low.
Cycle time lengthens to heat up the water when
the input water is cold. Also, washing time can be
lengthened to avoid poor washing results.
Input temperature of water
may be low.
Washing time
takes longer
than the time
specified in the
manual
The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
The laundry in the drum may be clustered (bundled
laundry in a bag). Laundry should be rearranged
and re-spun.
There may be an imbalance
of laundry in the machine.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Number of rinses and/or
amount of rinse water might
have increased.
Water amount is increased to obtain a better rinse
and a rinse cycle is added when necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 EN
In the case of a paused
countdown while taking in
water:
Timer will not countdown
until the machine is filled
with the correct amount of
water.
The machine will wait until there is a sufficient
amount of water to avoid poor washing results due
to lack of water. Then the timer will start to count
down.
In the case of a paused
countdown at the heating
step:
Time will not count
down until the selected
temperature for the
program is reached
It continuously
washes.
Remaining time
does not count
down.
The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
In the case of a paused
countdown at the spinning The laundry in the drum may be clustered (bundled
step:
laundry in a bag). Laundry should be rearranged
There may be an imbalance and re-spun.
of laundry in the machine.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
It continuously
spins.
Remaining time
does not count
down.
The laundry in the drum may be clustered (bundled
laundry in a bag). Laundry should be rearranged
and re-spun.
There may be an imbalance
of laundry in the machine.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
The automatic spin correction system might have
been activated due to the unbalanced distribution
There may be an imbalance of the laundry in the drum.
of laundry in the machine.
Therefore, the program
The laundry in the drum may be clustered (bundled
laundry in a bag). Laundry should be rearranged
might have been completed and re-spun.
It did not spin.
without spinning.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
The machine will not
spin if the water has not
completely drained.
- Check the filter.
- Check the drain hose.
- Using insufficient amount
of detergent for a long time,
- Washing at low
- Use the recommended amount of detergent
appropriate for water hardness and the laundry.
- Select the proper temperature for the laundry to
be washed.
temperatures for a long
time,
Washing
performance is
poor:
Laundry turns
gray
- Using insufficient amount
of detergent for hard
waters (soil can stick to the
laundry),
- Using excessive amount
of detergent (detergent can
stick to the laundry).
- If the water hardness is high, using an insufficient
amount of detergent can cause laundry to turn
gray over time.
- It is difficult to eliminate such grayness once it
occurs.
Download from Www.Somanuals.com. All Manuals Search And Download.
29 EN
Insufficient amount of
detergent used.
Use recommended amount of detergent
appropriate for the laundry.
Washing
Excessive laundry loaded
into machine
performance is
poor:
Do not load the machine in excess.
Stain could not Wrong program and
Select the proper program and temperature for the
laundry to be washed.
be removed,
not cleaned.
Laundry
could not be
whitened.
temperature might have
been selected.
Improper detergent may
have been used.
Wrong type of detergent
used.
Put the detergent in the correct compartment.
Do not mix detergent with bleaching agents.
Such odors and bacteria layers may be formed
on the drum as a result of continuous washing
at lower temperatures and/or in short programs.
Leave the detergent dispenser drawer as well as
Washing
performance is
poor:
Oily stains
appear on
laundry.
Oily accumulations on the
drum may have stuck to the the loading door of the machine ajar after each
laundry.
washing. Thus, a humid environment favorable for
bacteria cannot be created inside the machine.
Machine must be operated empty either at 60°C
or 90°C program with detergent every 6 months.
Washing
Oily accumulations on the
drum may have stuck to the
laundry.
performance is
poor:
Machine must be operated empty either at 60°C
or 90°C program with detergent every 6 months.
Bad odor
Excessive laundry might
have been loaded in.
Do not overload the machine.
Detergent may have gotten Store detergent in a closed and dry place. Do not
Color of the
clothes faded.
damp.
keep them under high temperatures.
Select the proper program and temperature
according to the type and soiling degree of the
laundry.
A higher temperature might
have been selected.
The amount, brand and
storage conditions of the
detergent used might not
be appropriate.
Store detergent in a closed and dry place. Do not
keep them under high temperatures.
If detergent is put in the prewash compartment
although prewash cycle is not selected, the
machine can take this detergent during rinsing or
softener step.
Detergent might have
been put in the wrong
compartment.
Machine filter may be
It does not
rinse well.
Check the filter.
clogged.
Drain hose may be folded. Check the drain hose.
There may be an imbalance of laundry in the
machine.
The laundry in the drum may be clustered (bundled
Intermediate spins may be laundry in a bag). Laundry should be rearranged
skipped.
and re-spun.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 EN
If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
Insufficient amount of
detergent used.
If detergent is put in the prewash compartment
although prewash cycle is not selected, the
machine can take this detergent during rinsing or
softener step.
Clothes
stiffened.
The detergent may have
been placed into the
wrong compartment; the
detergent may be mixed
with the softener.
Softener should not come into contact with
detergent when being added.
Wash and clean the drawer with hot water.
If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
Insufficient amount of
detergent used.
Clothes do not
smell like the
softener.
If detergent is put in the prewash compartment
although prewash cycle is not selected, the
machine can take this detergent during rinsing or
softener step.
The detergent may have
been placed into the
wrong compartment; the
detergent may be mixed
with the softener.
Softener should not come into contact with
detergent when being added.
Wash and clean the drawer with hot water.
Detergent may have been
put in wet dispenser
drawer.
Dry the detergent drawer before putting in
detergent.
Detergent may have gotten Store detergent in a closed and dry place. Do not
damp.
keep them under high temperatures.
Detergent
residue in the
dispensing
drawer.
Water pressure might be
low
The detergent in the main
wash compartment might
have gotten wet while
taking in the prewash
water..
The detergent dispenser outlet (holes) may have a
problem.
There might be problems with the detergent
dispenser valves.
Detergent might be mixed
with the bleaching agent.
Softener should not come into contact with
detergent when being added.
Excessive laundry might
have been loaded in.
Do not load the machine in excess.
There is
Wrong program and
Select the proper program and temperature for the
laundry to be washed.
detergent left
temperature might have
on the laundry. been selected.
Wrong detergent may have
been used.
Use wool detergents for woolens.
Download from Www.Somanuals.com. All Manuals Search And Download.
31 EN
You may not be using
proper detergent for
automatic washing
machines.
Use only automatic washing machine detergents in
your washing machine.
Excessive amount of
detergent may have been
used.
Use only sufficient amount of detergent.
Use only sufficient amount of detergent.
Too much detergent may
have been used for a small
amount of lightly soiled
laundry.
Detergent may have been
stored improperly.
Store detergent in a closed and dry location. Do
not store in excessively hot places.
Type of material being
There is too
much foam.
washed (lace items will
cause excessive foam due
to their meshed structure).
Use smaller amounts of detergent for lace items.
If you put detergent in the prewash compartment
although you have not selected a prewash cycle,
the machine can take this detergent during rinsing
or softener step.
Detergent might have
been put in the wrong
compartment.
You may have added too much softener.
The detergent dispenser might be problematic.
Water may be siphoned (pulling the softener into
the washer early) during the fill or rinse cycles.
There might be problems with the valves.
Softener being released
early.
The plug might not be
plugged in the mains outlet.
Plug should be checked.
Machine does
work. No light
is on.
Fuse may have blown.
Fuse should be checked.
Electricity may be cut off.
Power should be checked.
The “On/Off” button might
have not been pressed.
This button must be pressed.
The machine
did not start
after the
program was
selected and
the "Start/
Pause/Cancel"
button was
pressed.
The front door may be ajar.
“Washing”
and "Start/
Pause/Cancel"
lights are
flashing after
the program is
started.
You can restart your machine by pressing the
"Start/Pause/Cancel" button for a short time after
ensuring that the water is not cut off.
Water may have been cut
off.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 EN
9 Guarantee
Your new Beko product is guaranteed
against the cost of breakdown repairs
for twelve months from the date of the
original purchase.
Booklet provided.
• Professional installation by a qualified
Electrical Domestic Appliance Installer
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers
What is covered?
• Repairs necessary as a result of faulty • Gas Cookers must only be installed
materials, defective components or
manufacturing defect.
by a CORGI (or BORD GAIS)
registered Gas Installer.
• The cost of functional replacement
parts, but excluding consumable
items.
• The guarantee is given only within the
boundaries of the United Kingdom
and the Republic of Ireland.
• The labour costs of a Beko approved
repairer to carry out the repair.
• The guarantee is applicable only to
new products and is not transferable
if the product is resold.
What is not covered?
• Beko disclaims any liability for
incidental or consequential damages.
• The guarantee does not in anyway
diminish your statutory or legal rights.
• Transit, delivery or accidental damage
or misuse and abuse.
• Cabinet or appearance parts,
including knobs, flaps, handles or
container lids.
Should you experience any difficulty in
obtaining service please contact the
Beko Customer Help-Line.
Tel: 0845 600 4911
e-mail:[email protected]
• Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
• Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
• Repairs to products used on
commercial or non-residential
household premises.
• Loss of frozen food in freezers or
fridge/freezers. (Food loss insurance
is often included within your
household contents insurance policy,
or may be available separately from
your retailer).
Important notes.
• Your Beko product is designed and
built for domestic household use only.
• The guarantee will be void if the
product is installed or used in
commercial or non-residential
domestic household premises.
• The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
33 EN
10 Service
Please keep your purchase receipt
or other proof of purchase in a safe
place; you will need to have it should
the product require attention under
guarantee.
where service can be obtained at a
charge.
Should you experience any difficulty in
obtaining service please contact the
Beko Customer Help-Line.
Tel: 0845 600 4911
e-mail:[email protected]
You should also complete the details
below; it will help us assist you when
requesting service. (The model number
is printed on the Instruction Booklet
and the serial number is printed on the
Rating Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply
telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
Gas &
0845 600 4903
0845 600 4902
0845 600 4905
Dual Fuel Cookers
Washing Machines &
Dishwashers
0845 600 4906
Republic of Ireland
All Refrigeration,
All Cookers
01 862 3411
Washing Machines & Dishwashers
Before requesting service please
check the trouble-shooting guide in the
Operating Instructions as a charge may
be levied where no fault is found even
though your product may still be under
guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please
call the appropriate number above
Download from Www.Somanuals.com. All Manuals Search And Download.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|