Beko Washer Dryer WI1483 User Manual

WI1483

Washing Machine

User's Manual

Document Number

2820524088/ 21-05-14.(13:32)

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

5.8 Temperature selection. . . . . . . . . . . . . . . . .24

5.9 Spin speed selection. . . . . . . . . . . . . . . . . .24

5.10 Programme and consumption table. . . . . .25

5.11 Auxiliary function selection . . . . . . . . . . . .27

5.12 Time display. . . . . . . . . . . . . . . . . . . . . . .28

5.13 Starting the programme . . . . . . . . . . . . . .29

5.14 Progress of programme . . . . . . . . . . . . . .29

5.15 Loading door lock. . . . . . . . . . . . . . . . . . .29

5.16 Changing the selections after programme

has started . . . . . . . . . . . . . . . . . . . . . . .29

1 Important instructions for safety and

environment

1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4

1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .5

1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .6

1.4 Package information. . . . . . . . . . . . . . . . . . .6

1.5 Disposing of the waste product . . . . . . . . . . .6

1.6 Compliance with WEEE Directive . . . . . . . . . .7

2 Your washing machine

5.17 Child Lock . . . . . . . . . . . . . . . . . . . . . . . .30

5.18 Cancelling the programme . . . . . . . . . . . .30

5.19 Machine is in Rinse Hold mode . . . . . . . . .30

5.20 End of programme . . . . . . . . . . . . . . . . . .31

5.21 Your machine is equipped with a “Standby

Mode”. . . . . . . . . . . . . . . . . . . . . . . . . . .31

2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.2 Package Contents . . . . . . . . . . . . . . . . . . . .9

2.3 Technical specifications . . . . . . . . . . . . . . .10

3 Installation

3.1 Appropriate installation location. . . . . . . . . .11

3.2 Removing packaging reinforcement . . . . . .11

3.3 Removing the transportation locks. . . . . . . .11

3.4 Connecting water supply. . . . . . . . . . . . . . .12

3.5 Connecting to the drain. . . . . . . . . . . . . . . .12

3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . . .13

3.7 Electrical connection. . . . . . . . . . . . . . . . . .13

6 Maintenance and cleaning

6.1 Cleaning the detergent drawer . . . . . . . . . .32

6.2 Cleaning the loading door and the drum . . .32

6.3 Cleaning the body and control panel . . . . . .33

6.4 Cleaning the water intake filters . . . . . . . . .33

6.5 Draining remaining water and cleaning the

pump filter. . . . . . . . . . . . . . . . . . . . . . . .33

4 Preparation

4.1 Sorting the laundry . . . . . . . . . . . . . . . . . . .15 7 Troubleshooting

4.2 Preparing laundry for washing. . . . . . . . . . .16

4.3 Things to be done for energy saving . . . . . .16

4.4 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . .17

4.5 Correct load capacity . . . . . . . . . . . . . . . . .17

4.6 Loading the laundry . . . . . . . . . . . . . . . . . .17

4.7 Using detergent and softener . . . . . . . . . . .18

4.8 Tips for efficient washing . . . . . . . . . . . . . .20

8 BUILT-IN INSTALLATION

5 Operating the product

5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .21

5.2 Display symbols . . . . . . . . . . . . . . . . . . . . .21

5.3 Preparing the machine . . . . . . . . . . . . . . . .22

5.4 Programme selection . . . . . . . . . . . . . . . . .22

5.5 Main programmes . . . . . . . . . . . . . . . . . . .22

5.6 Additional programmes . . . . . . . . . . . . . . .23

5.7 Special programmes. . . . . . . . . . . . . . . . . .24

Download from Www.Somanuals.com. All Manuals Search And Download.

3 / EN

1 Important instructions for safety and environment

This section contains safety instructions that will help protect from risk of

personal injury or property damage. Failure to follow these instructions shall

void any warranty.

1.1 General safety

• This product can be used by children at and above 8 years old and by persons

whose physical, sensory or mental capabilities were not fully developed or

who lack experience and knowledge provided that they are supervised or

trained on the safe usage of the product and the risks it brings out. Children

must not play with the product. Cleaning and maintenance works should not

be performed by children unless they are supervised by someone.

• Never place the product on a carpet-covered floor. Otherwise, lack of airflow

beneath the machine will cause electrical parts to overheat. This will cause

problems with your product.

• If the product has a failure, it should not be operated unless it is repaired by

the Authorized Service Agent. There is the risk of electric shock!

• This product is designed to resume operating in the event of powering on after

a power interruption. If you wish to cancel the programme, see "Cancelling

the programme" section.

• Connect the product to a grounded outlet protected by a 13 A fuse. Do not

neglect to have the grounding installation made by a qualified electrician. Our

company shall not be liable for any damages that will arise when the product

is used without grounding in accordance with the local regulations.

• The water supply and draining hoses must be securely fastened and remain

undamaged. Otherwise, there is the risk of water leakage.

• Never open the loading door or remove the filter while there is still water in the

drum. Otherwise, risk of flooding and injury from hot water will occur.

• Do not force open the locked loading door. The loading door will be ready to

open just a few minutes after the washing cycle comes to an end. In case of

forcing the loading door to open, the door and the lock mechanism may get

damaged.

• Unplug the product when not in use.

• Never wash the product by spreading or pouring water onto it! There is the

risk of electric shock!

• Never touch the plug with wet hands! Never unplug by pulling on the cable,

always pull out by grabbing the plug.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

4 / EN

Important instructions for safety and environment

• Use detergents, softeners and supplements suitable for automatic washing

machines only.

• Follow the instructions on the textile tags and on the detergent package.

• The product must be unplugged during installation, maintenance, cleaning

and repairing procedures.

• Always have the installation and repairing procedures carried out by the

Authorized Service Agent. Manufacturer shall not be held liable

for damages that may arise from procedures carried out by unauthorized

persons.

• If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similary qualified persons in order to avoid a hazard.

• If the power cable is damaged, it must be replaced by the manufacturer,

after sales service or a similarly qualified person (preferably an electrician) or

someone designated by the importer in order to avoid possible risks.

• Place the product on a rigid, flat and level surface.

• Do not place it on a long-pile rug or similar surfaces.

• Do not place the product on a high platform or near the edge on a cascaded

surface.

• Do not place the product on the power cable.

• Never use sponge or scrub materials. These will damage the painted, chrome

plated and plastic surfaces.

1.2 Intended use

• This product has been designed for domestic use. It is not suitable for

commercial use and it must not be used out of its intended use.

• The product must only be used for washing and rinsing of laundry that are

marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or

transportation.

• The service life of your product is 10 years. During this period, original spare

parts will be available to operate the appliance properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

5 / EN

Important instructions for safety and environment

1.3 Children's safety

• Packaging materials are dangerous to children. Keep packaging materials in a

safe place away from reach of the children.

• Electrical products are dangerous for the children. Keep children away from

the product when it is in use. Do not let them to tamper with the product. Use

child lock to prevent children from intervening with the product.

• Do not forget to close the loading door when leaving the room where the

product is located.

• Store all detergents and additives in a safe place away from the reach of

the children by closing the cover of the detergent container or sealing the

detergent package.

While washing the laundry at high temperatures, the loading

door glass becomes hot. Therefore, keep especially the

children away from the loading door of the machine while the

washing operation is in progress.

1.4 Package information

• Packaging materials of the product are manufactured from recyclable

materials in accordance with our National Environment Regulations. Do

not dispose of the packaging materials together with the domestic or other

wastes. Take them to the packaging material collection points designated by

the local authorities.

1.5 Disposing of the waste product

• This product has been manufactured with high quality parts and materials

which can be reused and are suitable for recycling. Therefore, do not dispose

the product with normal domestic waste at the end of its service life. Take it

to a collection point for the recycling of electrical and electronic equipment.

Please consult your local authorities to learn the nearest collection point. Help

protect the environment and natural resources by recycling used products. For

children's safety, cut the power cable and break the locking mechanism of the

loading door so that it will be non-functional before disposing of the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

6 / EN

Important instructions for safety and environment

1.6 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU).

This product bears a classification symbol for waste electrical

and electronic equipment (WEEE).

This product has been manufactured with high quality parts

and materials which can be reused and are suitable for

recycling. Do not dispose of the waste product with normal

domestic and other wastes at the end of its service life. Take

it to the collection center for the recycling of electrical and

electronic equipment. Please consult your local authorities to

learn about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/

EU). It does not contain harmful and prohibited materials specified in the

Directive.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

7 / EN

2 Your washing machine

2.1 Overview

1- Power cable

2- Top panel

3- Control panel

4- Filter cap

5- Adjustable feet

6- Loading door

7- Detergent drawer

8- Drain hose

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

8 / EN

Your washing machine

2.2 Package Contents

1- Power cable

2- Drain hose

3- Transportation safety bolts *

4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.)

a- Electronical water shut-off

b- Mechanical water shut-off

c- Standard

5- User Manual

6- Blind plug**

7- Plastic plug group

Number of transportation safety bolts may change depending on the model of your machine.

** This is supplied if your machine is equipped with double water inlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

9 / EN

Your washing machine

2.3 Technical specifications

Complying Commission Delegated Regulation (EU) No 1061/2010

Supplier name or trademark

Beko

Model name

WI1483

Rated capacity (kg)

Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)

A++

Annual Energy Consumption (kWh) ⁽¹⁾

218

Energy consumption of the standard 60°C cotton programme at full load (kWh)

1.170

Energy consumption of the standard 60°C cotton programme at partial load (kWh)

0.844

Energy consumption of the standard 40°C cotton programme at partial load (kWh)

0.763

Power consumption in ‘off-mode’ (W)

0.200

Power consumption in ‘left-on mode’ (W)

1.000

Annual Water Consumption (l) ⁽²⁾

11000

Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency)

Maximum spin speed (rpm)

1400

Remaining moisture Content (%)

Standard cotton programme⁽³⁾

Cotton Eco 60°C and 40°C

Programme time of the standard 60°C cotton programme at full load (min)

184

145

133

N/A

50/68

Yes

Programme time of the standard 60°C cotton programme at partial load (min)

Programme time of the standard 40°C cotton programme at partial load (min)

Duration of the left-on mode (min)

Airborne acoustical noise emissions washing/spinning (dB)

Built-in

Rated capacity (kg)

Height (cm)

Width (cm)

Depth (cm)

Net weight ( 4 kg.)

Single Water inlet / Double Water inlet

• Available

• / -

Electrical input (V/Hz)

Total current (A)

230 V / 50Hz

Total power (W)

2200

Main model code

8811

⁽¹⁾Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption

of the low-power modes. Actual energy consumption will depend on how the appliance is used.

⁽²⁾Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water

consumption will depend on how the appliance is used.

⁽³⁾“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information

in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient

programmes in terms of combined energy and water consumption.

Technical specifications may be changed without prior notice to improve the quality of the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

10 / EN

3 Installation

Refer to the nearest Authorised Service Agent for

installation of the product. To make the product

ready for use, review the information in the user

manual and make sure that the electricity, tap

water supply and water drainage systems are

appropriate before calling the Authorised Service

Agent. If they are not, call a qualified technician

and plumber to have any necessary arrangements

carried out.

Preparation of the location and electrical,

tap water and waste water installations at

the place of installation is under customer's

responsibility.

3.3 Removing the

transportation locks

Make sure that the water inlet and discharge

hoses as well as the power cable are not

folded, pinched or crushed while pushing

the product into its place after installation or

cleaning procedures.

wARNiNg: Do not remove the

transportation locks before taking out the

A_{packaging reinforcement.}

wARNiNg: Manufacturer shall not be

held liable for damages that may arise from

B_{procedures carried out by unauthorised}

persons.

wARNiNg: Remove the transportation

safety bolts before operating the washing

machine! Otherwise, the product will be

damaged.

wARNiNg: Prior to installation, visually

check if the product has any defects on

1.Loosen all the bolts with a suitable spanner until

they rotate freely (C).

A_{it. If so, do not have it installed. Damaged}

products cause risks for your safety.

3.1 Appropriate installation location

• Place the machine on a rigid floor. Do not place

it on a long pile rug or similar surfaces.

• Total weight of the washing machine and the

dryer -with full load- when they are placed

on top of each other reaches to approx. 180

kilograms. Place the product on a solid and flat

floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product at places where

temperature may fall below 0ºC.

2.Remove transportation safety bolts by turning

them gently.

• Place the product at least 1 cm away from the

edges of other furniture.

3.2 Removing packaging

reinforcement

3.Attach the plastic covers supplied in the User

Manual bag into the holes on the rear panel. (P)

Tilt the machine backwards to remove the

packaging reinforcement. Remove the packaging

reinforcement by pulling the ribbon.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

11 / EN

Installation

Keep the transportation safety bolts in a safe

place to reuse when the washing machine

needs to be moved again in the future.

Never move the product without the

transportation safety bolts properly fixed in

place!

3.4 Connecting water supply

3.Open the taps completely after making the

hose connection to check for water leaks at

the connection points. If any leaks occur, turn

off the tap and remove the nut. Retighten the

nut carefully after checking the seal. To prevent

water leakages and damages caused by them,

keep the taps closed when the machine is not

in use.

The water supply pressure required to run

the product is between 1 to 10 bars (0.1 – 1

MPa). It is necessary to have 10 – 80 liters of

water flowing from the fully open tap in one

minute to have your machine run smoothly.

Attach a pressure reducing valve if water

pressure is higher.

If you are going to use the double water-inlet

product as a single (cold) water-inlet unit,

you must install the supplied stopper to the

hot water valve before operating the product.

(Applies for the products supplied with a blind

stopper group.)

3.5 Connecting to the drain

• The end of the drain hose must be directly

connected to the wastewater drain or to the

washbasin.

• Drain hose shall be attached to a wall drain,

stand pipe or sink siphon connected to the foul

water drain, do not connect to surface water

drains.

wARNiNg: Models with a single water inlet

should not be connected to the hot water tap.

In such a case the laundry will get damaged or

the product will switch to protection mode and

will not operate.

wARNiNg: Do not use old or used water

inlet hoses on the new product. It may cause

stains on your laundry.

wARNiNg: Your house will be flooded if

the hose comes out of its housing during

A_{water discharge. Moreover, there is risk of}

scalding due to high washing temperatures!

To prevent such situations and to ensure

smooth water intake and discharge of the

machine, fix the end of the discharge hose

tightly so that it cannot come out.

1.Connect the special hoses supplied with the

product to the water inlets on the product. Red

hose (left) (max. 90 ºC) is for hot water inlet,

blue hose (right) (max. 25 ºC) is for cold water

inlet.

• The hose should be attached to a height of at

least 40 cm, and 100 cm at most.

• In case the hose is elevated after laying it on

the floor level or close to the ground (less than

40 cm above the ground), water discharge

becomes more difficult and the laundry may

come out excessively wet. Therefore, follow the

heights described in the figure.

wARNiNg: Ensure that the cold and hot

water connections are made correctly when

installing the product. Otherwise, your laundry

2.Tighten all hose nuts by hand. Never use a tool

when tightening the nuts.

will come out hot at the end of the washing

process and wear out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

12 / EN

Installation

2.Adjust the feet until the product stands level

and balanced.

3.Tighten all lock nuts again by hand.

• To prevent flowing of dirty water back into the

machine and to allow for easy discharge, do not

immerse the hose end into the dirty water or do

not drive it in the drain more than 15 cm. If it is

too long, cut it short.

• The end of the hose should not be bent, it

should not be stepped on and the hose must

not be pinched between the drain and the

machine.

• If the length of the hose is too short, use it by

adding an original extension hose. Length of the

hose may not be longer than 3.2 m. To avoid

water leak failures, the connection between

the extension hose and the drain hose of the

product must be fitted well with an appropriate

clamp as not to come off and leak.

wARNiNg: Do not use any tools to loosen

the lock nuts. Otherwise, they will get

A_damaged.

3.7 Electrical connection

Connect the product to a grounded outlet

protected by a 13 A fuse. Our company shall not

be liable for any damages that will arise when the

product is used without grounding in accordance

with the local regulations.

• Connection must comply with national

regulations.

3.6 Adjusting the feet

• Power cable plug must be within easy reach

after installation.

• If the current value of the fuse or breaker in the

house is less than 13 Amps, have a qualified

electrician install a 13 Amp fuse.

• The voltage specified in the "Technical

specifications" section must be equal to your

mains voltage.

• Do not make connections via extension cables

or multi-plugs.

wARNiNg: In order to ensure that the

product operates more silently and vibration-

A_{free, it must stand level and balanced on its}

feet. Balance the machine by adjusting the

feet. Otherwise, the product may move from

its place and cause crushing and vibration

problems.

1.Loosen the lock nuts on the feet by hand.

wARNiNg: Damaged power cables must

be replaced by the Authorised Service

B_Agents.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

13 / EN

Installation

Electrical requirements

2 Connect the blue (neutral) wire to the terminal

in the plug marked ‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in

the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be

fitted either in the plug or adaptor or in the main

fuse box. If in doubt contact a qualified electrician.

Before you insert the plug into the wall socket

make sure that the voltage and the frequency

shown in the rating label corresponds to your

electricity supply.

We recommend that this appliance be connected

to the mains supply via a suitable switched and

fused socket in a readily accessible position.

Should the mains lead of the appliance become

damaged or need replacing at any time, it must be

replaced by a special purpose made mains lead

which can only be obtained from a Authorised

Service Agent.

wARNiNg: This appliance must be

earthed

If the fitted moulded plug is not suitable for your

socket, then the plug should be cut off and an

appropriate plug fitted.

Destroy the old plug, which is cut off as a plug

with a bared cord could cause a shock hazard if

inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a

13A fuse. Should the fuse need to be replaced an

ASTA approved BS1362 fuse of the same rating

must be used. Do not forget to refit the fuse cover.

In the event of losing the fuse cover, the plug must

not be used until a replacement fuse cover has

been fitted. Colour of the replacement fuse cover

must be the same colour as that visible on the pin

face of the plug. Fuse covers are available from

any good electrical store.

Transportation of the product

1.Unplug the product before transporting it.

2.Remove water drain and water supply

connections.

3.Drain all water that has remained in the

product. See 6.5

4.Install transportation safety bolts in the reverse

order of removal procedure; see 3.3.

Never move the product without the

transportation safety bolts properly fixed

in place!

important

Fitting a different plug

As the colours of the wires in the mains lead

of this appliance may not correspond with the

coloured markings identifying the terminals on

your plug, proceed as follows:

wARNiNg: Packaging materials are

dangerous to children. Keep packaging

A_{materials in a safe place away from reach}

of the children.

1 Connect the green - yellow or green (earth) wire

to the terminal in the plug marked ‘E’ or with

the symbol f or coloured green and yellow or

green.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

14 / EN

4 Preparation

4.1 Sorting the laundry

• Sort laundry according to type of fabric, colour,

and degree of soiling and allowable water

temperature.

• Always obey the instructions given on the

garment tags.

LAUNDRY WASH SYMBOLS

Machine

Wash

Symbols

wASH

95⁰C

70⁰C

60⁰C

50⁰C 40⁰C

30⁰C

Maximum

Symbol(s)

Water

Temperatures

lll

l l

lll

Drying

Symbols

Suitable for

dryer

No Iron

Do not dry-

clean

Sensitive /

Delicate dry

Do not dry

with dryer

Do not dry

DRYiNg

Drying

Settings

Iron -

Iron at high

temperature

Iron at medium

temperature

Iron at low

temperature

Dry or Steam

iRON

200 ⁰C

150 ⁰C

110 ⁰C

Maximum temperature

Bleach (sodium

hypochlorite)

can be used

Bleach is not

allowed

Only bleaches without

chlorine are allowed

All bleaches are allowed

BLEACH

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

15 / EN

Preparation

4.2 Preparing laundry for washing

• Laundry items with metal attachments such as,

underwired bras, belt buckles or metal buttons

will damage the machine. Remove the metal

pieces or wash the clothes by putting them in a

laundry bag or pillow case.

• Take out all substances in the pockets such as

coins, pens and paper clips, and turn pockets

inside out and brush. Such objects may damage

the product or cause noise problem.

• Put small size clothes such as infant's socks

and nylon stockings in a laundry bag or pillow

case.

• Place curtains in without compressing them.

Remove curtain attachment items.

• Fasten zippers, sew loose buttons and mend

rips and tears.

• Wash “machine washable” or “hand washable”

labeled products only with an appropriate

programme.

4.3 Things to be done

for energy saving

Following information will help you use the

product in an ecological and energy-efficient

manner.

• Operate the product in the highest capacity

allowed by the programme you have selected,

but do not overload; see, "Programme and

consumption table".

• Always follow the instructions on the detergent

packaging.

• Wash slightly soiled laundry at low

temperatures.

• Use faster programmes for small quantities of

lightly soiled laundry.

• Do not use prewash and high temperatures for

laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select

the highest spin speed recommended during

washing process.

• Do not wash colours and whites together. New,

dark coloured cottons release a lot of dye. Wash

them separately.

• Do not use detergent in excess of the amount

recommended on the detergent package.

• Tough stains must be treated properly before

washing. If unsure, check with a dry cleaner.

• Use only dyes/colour changers and limescale

removers suitable for machine wash. Always

follow the instructions on the package.

• Wash trousers and delicate laundry turned

inside out.

• Keep laundry items made of Angora wool in the

freezer for a few hours before washing. This will

reduce pilling.

• Laundry that are subjected to materials such as

flour, lime dust, milk powder, etc. intensely must

be shaken off before placing into the machine.

Such dusts and powders on the laundry may

build up on the inner parts of the machine in

time and can cause damage.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

16 / EN

Preparation

4.4 Initial use

4.5 Correct load capacity

The maximum load capacity depends on the type

of laundry, the degree of soiling and the washing

programme desired.

The machine automatically adjusts the amount

of water according to the weight of the loaded

laundry.

Before starting to use the product, make sure

that all preparations are made in accordance

with the instructions in sections “Important safety

instructions” and “Installation”.

To prepare the product for washing laundry,

perform first operation in Drum Cleaning

programme. If your product is not equipped with

Drum Cleaning programme, perform the Initial

Use procedure in accordance with the methods

described under “6.2 Cleaning the loading door

and the drum” section of the user manual.

wARNiNg: Follow the information in the

“Programme and consumption table”.

A_{When overloaded, machine's washing}

performance will drop. Moreover, noise

and vibration problems may occur.

Laundry type

Bathrobe

Napkin

weight (g)

1200

100

Duvet cover

Bed Sheet

Pillowcase

Tablecloth

Towel

700

500

200

250

200

Hand towel

Evening gown

Underclothing

Men’s overalls

Men’s shirt

Men’s pajamas

Blouses

100

200

100

600

200

500

100

Use an anti-limescale suitable for the

washing machines.

Some water might have remained in

the product due to the quality control

processes in the production. It is not

harmful for the product.

4.6 Loading the laundry

1.Open the loading door.

2.Place laundry items loosely into the machine.

3.Push the loading door to close until you hear a

locking sound. Ensure that no items are caught

in the door.

The loading door is locked while a

programme is running. The door can only

be opened a while after the programme

comes to an end.

wARNiNg: In case of misplacing the

laundry, noise and vibration problems may

A_{occur in the machine.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

17 / EN

Preparation

The detergent drawer compartments are

indicated below:

1) Left compartment with number “II” (Main wash

compartment for powder detergent or powder

bleach/stain remover)

2) Left compartment with number “II ” (Main

wash compartment for liquid detergent or liquid

stain remover)

3) Middle compartment with number “I” (pre-wash

compartment for powder detergent, powder

stain remover or liquid bleach - liquid bleach

must be added either during the pre-wash

or during the first rinsing step of the washing

Programme). Liquid bleach must be added

manually while the machine takes in water.

4) Right compartment with “ ” symbol (liquid

softener compartment)

4.7 Using detergent and softener

When using detergent, softener, starch,

fabric dye, bleach or limescale remover

read the manufacturer's instructions

on the package carefully and follow the

suggested dosage values. Use measuring

cup if available.

Detergent Drawer

Detergent drawer of your washing machine

consists of four different compartments for

powder main wash detergent, liquid main wash

detergent, liquid softener and powder pre-wash

detergent. Each of these laundry additives are

dispensed automatically in the relevant time

during the washing Programme.

Do not place the laundry additives directly into the

drum. Always use the detergent drawer.

Do not close the drawer too fast after putting the

laundry additives. This may cause the additives be

dispensed early, creating unsatisfactory washing

results and fabric damage.

Do not open the drawer during washing

Programme.

(II) Main Wash Compartment

Before starting the washing Programme, put

powder detergent into the left compartment with

number “II”. Use the detergent manufacturer’s

measuring cup and follow the instructions on the

package. Powder bleach/stain remover must also

be put into this compartment.

Put the liquid detergent into the main wash

compartment with number “II ” before starting

the washing Programme. Liquid stain remover

must be put into this compartment.

Put the suggested amount of liquid detergent into

the left compartment with “II ” symbol and dilute

it to the maximum filling level line (max. II ) with

warm water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

18 / EN

Preparation

Particularly the concentrated detergents must be

diluted with warm water; otherwise, the siphon

may get clogged in time.

Do not fill the detergent above the maximum

filling level line; otherwise the excess amount of

detergent will reach the laundry without water and

may cause stains on the garments.In this case

you will need to refill the compartment. Do not

pour the detergent onto the laundry directly since

this may cause stains on the garments.

Starch

• Add liquid starch, powder starch or the dyestuff

into the softener compartment as instructed on

the package.

• Never use fabric softener and starch together in

the same washing cycle.

• Wipe the inside of the drum after using starch.

Bleaches

If you are going to use regular bleach in your

machine, it is suggested to select a Programme

with pre-wash step and add the bleach at the

beginning of the pre-wash without putting

detergent into the pre-wash compartment.

Alternatively, it is suggested to select a

Programme with extra rinsing and add the

bleach while the machine takes in water from the

detergent drawer in the first rinsing step. Bleach

should not be mixed with detergent. Since the

bleach may cause irritation on skin, little amounts

must be used and rinsed thoroughly. Do not pour

bleach directly onto the laundry and do not use it

with colour laundry.

Liquid Softener Compartment

Put the suggested amount of liquid softener into

the right compartment with “ ” symbol and

dilute it to the maximum filling level line (max.

) with warm water.

Particularly the concentrated softeners must be

diluted with warm water; otherwise, the siphon

may get clogged in time.

Do not fill the softener above the maximum filling

level line; otherwise the excess amount of softener

will get mixed with the washing water and you will

need to refill the compartment. Do not pour the

softener onto the laundry directly since this may

cause stains on the garments.

When using oxygen based bleach, follow

the instructions on the package and select a

Programme at low temperature. Oxygen based

bleach can be used together with the detergent.

However, if it is not at the same thickness with

the detergent, then it must be added from the

compartment number “II” right after the detergent

foams with water.

Liquid softener will be dispensed automatically at

the final rinsing step of the washing Programme.

(I) Pre-Wash Compartment

Put the powder pre-wash detergent or powder

stain remover into the middle compartment with

number “I”.

Eliminating lime formation

You can also put liquid bleach into this

compartment while the machine takes in water

during pre-wash or first rinsing step. Adding the

liquid bleach while the machine takes in water

allows it to be diluted before it is poured onto the

laundry.

• When required, use only appropriate lime

removers developed specifically for washing

machines and always follow the instructions on

the package.

You must select extra rinsing option if you use

liquid bleach in a washing Programme. Bleach

must be removed from the laundry with rinsing;

otherwise it may cause itching on the skin.

Read the dosage instructions and label of

your garments carefully before using the

liquid bleach.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

19 / EN

Preparation

4.8 Tips for efficient washing

Clothes

Light colours and

Delicates/woolens/

Silks

Colours

Dark colours

whites

(Recommended

temperature range

(Recommended

temperature range

(Recommended

temperature range temperature range

(Recommended

based on soiling level: based on soiling level:

based on soiling

level: cold-40ºC)

based on soiling

level: cold-30ºC)

40-90ºC)

cold-40ºC)

It may be necessary

to pre-treat the

stains or perform

prewash. Powder

and liquid detergents

recommended

Powder and

liquid detergents

recommended for

Liquid detergents

suitable for

colours can be used at

dosages recommended

for heavily soiled clothes.

It is recommended to

use powder detergents

to clean clay and soil

stains and the stains

that are sensitive to

bleaches. Use detergents

without bleach.

Prefer liquid

Heavily Soiled

detergents produced

for delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

for whites can be

used at dosages

colours and dark

colours can be

used at dosages

recommended

for heavily soiled

clothes.

(difficult stains

such as grass,

coffee, fruits and

blood.)

recommended for

heavily soiled clothes.

It is recommended to

use powder detergents

to clean clay and soil

stains and the stains

that are sensitive to

bleaches.

Powder and

liquid detergents

recommended for

colours can be used at colours can be

dosages recommended used at dosages

for normally soiled

Liquid detergents

suitable for

colours and dark

Powder and

Prefer liquid

Normally Soiled

liquid detergents

recommended for

whites can be used at

dosages recommended

for normally soiled

clothes.

detergents produced

for delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

(For example,

stains caused by

body on collars

and cuffs)

recommended for

clothes. Use detergents normally soiled

without bleach.

clothes.

Powder and

liquid detergents

recommended for

colours can be used at colours can be

dosages recommended used at dosages

for lightly soiled clothes. recommended

Use detergents without for lightly soiled

Liquid detergents

suitable for

colours and dark

Powder and

Prefer liquid

liquid detergents

recommended for

whites can be used at

dosages recommended

for lightly soiled

clothes.

detergents produced

for delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

Lightly Soiled

(No visible stains

exist.)

bleach.

clothes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

20 / EN

5 Operating the product

5.1 Control panel

1 -

2 -

3 -

4 -

Spin Speed Adjustment button

Display

Temperature Adjustment button

Programme Selection knob

5 -

6 -

7 -

8 -

On / Off button

Delayed Start buttons (+ / -)

Auxiliary Function buttons

Start / Pause / Cancel button

5.2 Display symbols

- Spin Speed indicator

- Temperature indicator

- Spin symbol

- Temperature symbol

- Remaining Time and Delayed Start

indicator

- Programme Indicator symbols (Prewash

/ Main Wash / Rinse / Softener / Spin)

- Economy symbol

- Delayed Start symbol

- Door Locked symbol

- Start symbol

m -

- Pause symbol

- Auxiliary Function symbols

No Water symbol

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

21 / EN

Operating the product

5.3 Preparing the machine

5.5 Main programmes

1.Make sure that the hoses are connected tightly. Depending on the type of fabric, use the following

2.Plug in your machine.

main programmes.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

• Cottons

Use this programme for your cotton laundry (such

as bed sheets, duvet and pillowcase sets, towels,

bathrobes, underwear, etc.). Your laundry will be

washed with vigorous washing action for a longer

washing cycle.

5.4 Programme selection

1.Select the programme suitable for the type,

quantity and soiling degree of the laundry

in accordance with the "Programme and

consumption table" and the temperature table

below.

• Synthetics

Use this programme to wash your synthetic

clothes (shirts, blouses, synthetic/cotton blends,

etc.). It washes with a gentle action and has a

shorter washing cycle compared to the Cottons

programme.

Heavily soiled white cottons and linens.

(coffee table covers, tableclothes, towels,

bed sheets, etc.)

90˚C

For curtains and tulle, use the Synthetic 40˚C

programme with prewash and anti-creasing

functions selected. As their meshed texture

causes excessive foaming, wash the veils/tulle by

putting little amount of detergent into the main

wash compartment. Do not put detergent in the

prewash compartment.

Normally soiled, coloured, fade proof

linens, cottons or synthetic clothes (shirt,

nightgown, pajamas, etc.) and lightly soiled

white linens (underwear, etc.)

60˚C

40˚C-

30˚C-

Cold

Blended laundry including delicate textile

(veil curtains, etc.), synthetics and woolens.

2.Select the desired programme with the

Programme Selection button.

• Woollens

Use this programme to wash your woolen clothes.

Select the appropriate temperature complying

with the tags of your clothes. Use appropriate

detergents for woolens.

Programmes are limited with the highest

spin speed appropriate for that particular

C_{type of fabric.}

When selecting a programme, always

consider the type of fabric, colour,

degree of soiling and permissible water

temperature.

Always select the lowest required

temperature. Higher temperature means

higher power consumption.

For further programme details, see

"Programme and consumption table"

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

22 / EN

Operating the product

• Mixed Fabrics

Use this programme to wash your cotton and

synthetic clothes together without sorting them.

5.6 Additional programmes

For special cases, additional programmes are

available in the machine.

• Intensive

Additional programmes may differ

according to the model of the machine.

You can wash your durable and heavily soiled

clothes on this program. This program washes

for a longer time and an extra rinse cycle will be

made compared to the “Cottons” program. You

can use it for your heavily soiled clothes that you

wish to be rinsed gently.

• Cottons Eco

You may wash your normally soiled durable cotton

and linen laundry in this programme with the

highest energy and water saving compared to

all other wash programmes suitable for cottons.

Actual water temperature may differ from the

declared cycle temperature. Programme duration

may automatically be shortened during later

stages of the programme if you wash less amount

(e.g. ½ capacity or less) of laundry. In this case

energy and water consumption will be further

decreased giving you the opportunity for a more

economical wash. This feature is available for

certain models having remaining time display.

• Freshen Up

Use this programme to remove the odour on the

laundry that are worn only for once and do not

contain any stains or dirt.

• Eco Clean

Use this programme, which is much more

sensitive to environment and natural resources,

to wash your lightly soiled and unstained cotton

laundry (max. 3.5 kg) in a short time and

economically.

• Baby&Toddler Clothing

It is recommended to use liquid detergent

or gel washing detergent.

Use this programme to wash baby laundry, and

the laundry that belongs to allergic persons.

Longer heating time and an additional rinsing step

provide a higher level of hygiene.

• Self Clean

Use this programme regularly (once in every

1-2 months) to clean the drum and provide the

required hygiene. Run the programme without

any laundry in the machine. To obtain better

results, put powder limescale remover for washing

machines into the detergent compartment II.

When the programme is over, leave the loading

door ajar so that the inside of the machine gets

dry.

• Hand Wash

Use this programme to wash your woolen/delicate

clothes that bear “not machine- washable” tags

and for which hand wash is recommended. It

washes laundry with a very gentle washing action

to not to damage clothes.

• Daily Quick

Use this programme to wash your lightly soiled

cotton clothes in a short time.

This is not a washing programme. It is a

maintenance programme.

• Xpress Super Short

Use this programme to wash your little amount of

lightly soiled cotton clothes in a short time.

• Dark Care

Do not run the programme when there

is something in the machine. If you try to

do so, the machine detects that there is a

Use this programme to wash your dark coloured

laundry, or the coloured laundry that you do not

want them get faded. Washing is performed with

less mechanical movements at low temperature.

It is recommended to use liquid detergent or wool

shampoo for dark coloured laundry.

load inside and aborts the programme

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

23 / EN

Operating the product

5.7 Special programmes

For specific applications, select any of the

following programmes.

Economy symbol

Indicates the programmes and temperatures that

provide energy savings.

• Rinse

Economy symbol can not be selected in

Intensive and Hygiene programmes since

washing is performed in long times and

at high temperatures in order to provide

hygiene. Similarly, Economy symbol can

not be selected in Baby, Refresh, Drum

Cleaning, Spin and Rinse programmes

as well.

Use this programme when you want to rinse or

starch separately.

• Spin+Drain

Use this programme to apply an additional spin

cycle for your laundry or to drain the water in the

machine.

Before selecting this programme, select the

desired spin speed and press Start / Pause /

Cancel button. The machine will spin the laundry

with the set spin speed and drain the water

coming out of them.

If you wish to drain only the water without

spinning your laundry, select the Pump+Spin

programme and then select the No Spin function

with the help of Spin Speed Adjustment button.

Press Start / Pause / Cancel button.

5.9 Spin speed selection

Whenever a new programme is selected, the

recommended spin speed of the selected

programme is displayed on the spin speed

indicator.

Use a lower spin speed for delicate

laundries.

To decrease the spin speed, press the Spin

Speed Adjustment button. Spin speed decreases

gradually. Then, depending on the model of the

product, "Rinse Hold" and "No Spin" options

appear on the display. See "Auxiliary function

selection" section for explanations of these

options.

5.8 Temperature selection

Whenever a new programme is selected,

the maximum temperature for the selected

programme appears on the temperature indicator.

To decrease the temperature, press the

Temperature Adjustment button. Temperature

decreases with increments of 10° and finally, “-”

symbol indicating the cold wash option appears

on the display.

Rinse Hold option is indicated with “

” symbol and No Spin option is indicated

with “ ” symbol.

If you scroll to cold wash option and

press Temperature Adjustment button

again, the recommended temperature

for the selected programme appears

on the display. Press the Temperature

Adjustment button again to decrease the

temperature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

24 / EN

Operating the product

5.10 Programme and consumption table

Auxiliary functions

Selectable

temperature range

°C

Programme (°C)

Cottons

60**

40**

2.40

1.70

0.95

2.10

1.17

0.84

0.76

0.77

1.60

1.00

0.45

0.16

0.55

0.10

1.95

1.10

0.22

0.30

0.20

0.55

2.15

0.03

1600

1200

1600

1200

1400

1200

800

•

90-Cold

90-30

Baby&Toddler Clothing

Cottons Eco

Intensive

60-Cold

60-40

•

Synthetics

•

60-Cold

Synthetics

Eco clean 20

Mixed Fabrics

Xpress Super Short

Daily Quick

Woollens

3.5

•

40-Cold

30-Cold

90-Cold

40-Cold

30-Cold

40-Cold

1.5

Hand Wash

Dark Care

•

Self Clean

Freshen up

1200

• : Selectable

* : Automatically selected, no cancelling.

** : Energy Label programme (EN 60456 Ed.3)

*** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin

speed.

- : See the programme description for maximum load.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

25 / EN

Operating the product

** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C

cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the

on the panel.

symbols

The auxiliary functions in the table may vary according to the model of your machine.

Water and power consumption may vary subject to the changes in water pressure, water hardness

and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions

and spin speed, and changes in electric voltage.

You can see the washing time of the programme you have selected on the display of the machine. It is

normal that small differences may occur between the time shown on the display and the real washing

time.

“Selectability of auxiliary functions might be changed by the manufacturer. New

might be added or existing ones might be removed.”

selectabilities

“The spin speed of your machine may vary among the programmes, however this speed cannot

exceed the max. spin speed of your machine.”

Indicative values for Synthetics programmes (EN)

Remaining Moisture

Content (%) **

Remaining Moisture

Content (%) **

≤ 1000 rpm

> 1000 rpm

Synthetics 60

Synthetics 40

1.00

0.45

01:48

01:43

* You can see the washing time of the programme you have selected on the display of the machine. It is normal that

small differences may occur between the time shown on the display and the real washing time.

** Remaining moisture content values may differ according to the selected spin speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

26 / EN

Operating the product

• Quicker Wash

5.11 Auxiliary function selection

Select the desired auxiliary functions before

starting the programme. Furthermore, you may

also select or cancel auxiliary functions that are

suitable to the running programme by pressing

the Start / Pause / Cancel button when the

machine is operating. For this, the machine must

be in a step before the auxiliary function you are

going to select or cancel.

Depending on the programme, press a, b, c or d

buttons to select the desired auxiliary function.

Symbol of the selected auxiliary function appears

on the display.

This function can be used in Cottons and

Synthetics programmes. It decreases the washing

times and also the number of rinsing steps for

lightly soiled laundry.

F2 appears on the display when you select this

function (b).

When you select this function, load

your machine with half of the maximum

laundry specified in the programme

table.

• Extra Rinse

This function enables the machine to make

another rinsing in addition to the one already

made after the main wash. Thus, the risk for

sensitive skins (babies, allergic skins, etc.) to be

effected by the minimal detergent remnants on

the laundry can be reduced.

F3 appears on the display when you select this

function (c).

• Anti- Crease

This function creases the clothes lesser when they

are being washed. Drum movement is reduced

and spinning speed is limited to prevent creasing.

In addition, washing is done with a higher water

level.

F4 appears on the display when you select this

function (d).

Some functions cannot be selected

together. If a second auxiliary function

conflicting with the first one is selected

before starting the machine, the function

selected first will be canceled and the

second auxiliary function selection will

remain active. For example, if you want

to select Quick Wash after you have

selected the Prewash, Prewash will be

canceled and Quick Wash will remain

active.

• Rinse Hold

If you are not going to unload your clothes

immediately after the programme completes, you

may use rinse hold function to keep your laundry

in the final rinsing water in order to prevent them

from getting wrinkled when there is no water in

the machine. Press Start / Pause /Cancel button

after this process if you want to drain the water

without spinning your laundry. Programme will

resume and complete after draining the water.

If you want to spin the laundry held in water,

adjust the Spin Speed and press Start / Pause /

Cancel button.

An auxiliary function that is not

compatible with the programme cannot

be selected. (See “Programme and

consumption table”)

Auxiliary Function buttons may vary

according to the model of the machine.

• Prewash

A Prewash is only worthwhile for heavily soiled

laundry. Not using the Prewash will save energy,

water, detergent and time.

The programme resumes. Water is drained,

laundry is spun and the programme is completed.

F1 appears on the display when you select this

function (a).

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

27 / EN

Operating the product

• Pet hair removal

3.Set the desired delayed start time by pressing

the Delayed Start + or - buttons. Delayed Start

symbol flashes.

4.Press Start / Pause / Cancel button. Delayed

start countdown starts. Delayed Start symbol

illuminates steadily. Start symbol appears. “:”

the display starts flashing.

This function helps to remove pet hair that remain

on your garments more effectively.

When you select this function, Prewash and Extra

Rinse steps are added to the normal programme.

Thus, washing is performed with more water

(30%) and the pet hair is removed more

effectively.

Additional laundry may be loaded during

the delayed start period. At the end of

the countdown, Delayed Start symbol

disappears, washing cycle starts and the

time of the selected programme appears

on the display.

wARNiNg: Never wash your pets in the

washing machine.

5.12 Time display

Remaining time to complete the programme

appears on the display while the programme is

running. Tim is displayed as “01:30” in hours and

minutes format.

Changing the delayed start period

If you want to change the time during countdown:

1.Press Start / Pause / Cancel button. “:” sign

in the middle of the delayed start time on the

display stops flashing. Pause symbol appears.

Delayed Start symbol flashes. Start symbol

disappears.

2.Set the desired delayed start time by pressing

the Delayed Start + or - buttons.

3.Press Start / Pause / Cancel button. Delayed

Start symbol illuminates steadily. Pause symbol

disappears. Start symbol appears.

4.“:” sign in the middle of the delayed start time

on the display starts flashing.

Cancelling the Delayed Start function

If you want to cancel the delayed start countdown

and start the programme immediately:

1.Press Start / Pause / Cancel button. “:” sign

in the middle of the delayed start time on the

display stops flashing.

2.Start symbol disappears. Pause symbol and

Delayed Start symbol flashes.

3.Decrease the delayed start time by pressing

the Delayed Start - button. Programme duration

appears after 30 minutes.

Programme time may differ from

the values in the “Programme and

consumption table” depending on the

water pressure, water hardness and

temperature, ambient temperature,

amount and the type of laundry, auxiliary

functions selected and the changes at the

mains voltage.

Delayed start

With the Delayed Start function the startup

of the programme may be delayed up to 24

hours. Delayed start time can be increased by

increments of 30 minutes.

Do not use liquid detergents when you

set Delayed Start! There is the risk of

staining of the clothes.

4.Press Start / Pause / Cancel button to start the

programme.

1.Open the loading door, place the laundry and

put detergent, etc.

2.Select the washing programme, temperature,

spin speed and, if required, the auxiliary

functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

28 / EN

Operating the product

5.13 Starting the programme

1.Press Start / Pause / Cancel button to start the

programme.

2.Start symbol showing the startup of the

programme will turn on.

3.Loading door is locked and Door Locked symbol

appears on the display.

4.The symbol of the step from which the

programme has started appears on the display

(Prewash, Main Wash, Rinse, Softener and

Spin).

5.15 Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the door in

cases when the water level is unsuitable.

Door Locked symbol appears when the loading

door is locked. This symbol will flash until the

loading door becomes ready to open when

programme completes or the machine is paused.

Do not force to open the loading door in this step.

Symbol disappears when the door is ready to

open. You can open the door when the symbol

disappears.

5.14 Progress of programme

Progress of a running programme is indicated on

the display with a set of symbols.

Relevant symbol appears on the display at the

beginning of each programme step and all

symbols remain lit at the end of the programme.

The farthermost right symbol indicates the current

programme step.

5.16 Changing the selections

after programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to switch

the machine to pause mode. Pause symbol

appears on the display indicating that the machine

is paused. Start symbol disappears.

Prewash

If the Prewash auxiliary function is selected,

Prewash symbol appears on the display indicating

that the prewash step has started.

Main Wash

Main Wash symbol indicating that the main wash

step has started appears on the display.

Changing the speed and temperature settings

for auxiliary functions

Depending on the step the programme has

reached, you may cancel or activate the auxiliary

functions; see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Rinse

Rinse symbol indicating that the rinsing step has

started appears on the display.

Softener

Softener symbol indicating that the softener step

has started appears on the display.

Adding or taking out laundry

Spin

1.Press the Start / Pause / Cancel button to

switch the machine to pause mode. The

programme follow-up light of the relevant step

during which the machine was switched into

Appears at the beginning of the final spin step

and remains lit during Spin and Pump special

programmes.

If the machine does not pass to the

spinning step, Rinse Hold function might

be active or the automatic unbalanced

load detection system might be activated

due to the unbalanced distribution of the

laundry in the machine.

the pause mode will flash.

2.Wait until the Loading Door can be opened.

3.Open the Loading Door and add or take out the

laundry.

4.Close the Loading Door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

29 / EN

Operating the product

5. Make changes in auxiliary functions,

temperature and speed settings if necessary.

6. Press Start / Pause / Cancel button to start the

machine.

Do not forget to disable the child lock

at the end of the programme if it was

enabled before. Otherwise, machine will

not allow to select a new programme.

The loading door will not open if the

water temperature in the machine is

5.18 Cancelling the programme

Press and hold Start / Pause / Cancel button

for 3 seconds. Start symbol flashes. Symbol of

the step at which the programme was cancelled

remains lit. "End" appears on the display and the

programme is cancelled.

high or the water level is above the door

opening.

5.17 Child Lock

Use Child Lock function to prevent children from

tampering with the machine. Thus you can avoid

any changes in a running programme.

You can switch on and off the machine

with On / Off button when the Child

Lock is active. When you switch on the

machine again, programme will resume

from where it has stopped.

If you want to open the loading door after

you have cancelled the programme but it

is not possible to open the loading door

To activate the Child Lock:

since the water level in the machine is

above the loading door opening, then

turn the Programme Selection knob to

Pump+Spin programme and discharge

the water in the machine.

Press and hold 2^ndand 4^thAuxiliary Function

buttons for 3 seconds. “Con” appears on the

display.

5.19 Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates

when the machine is in Rinse Hold mode.

If you want to spin your laundry when the machine

is in this mode:

Adjust the spin speed and press Start / Pause /

Cancel button. Pause symbol disappears and Start

symbol appears. Programme resumes, discharges

the water and spins the laundry.

If you only want to drain the water without

spinning:

Just press Start / Pause / Cancel button. Pause

symbol disappears. Start symbol appears.

Programme resumes and discharges the water

only.

Same phrase will appear on the display

if you press any button when Child Lock

is enabled.

To deactivate the Child Lock:

Press and hold 2^ndand 4^thAuxiliary Function

buttons for 3 seconds. “COFF” appears on the

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

30 / EN

Operating the product

5.20 End of programme

“End” appears on the display at the end of the

programme. Symbols of the programme steps

remain lit. Auxiliary function, spin speed and

temperature that were selected at the beginning

of the programme remain selected.

5.21 Your machine is equipped

with a “Standby Mode”

In case of not starting any programme or waiting

without making any other operation when the

machine is turned on by On/Off button and while

it is in selection step or if no other operation is

performed approximately 2 minutes after the

programme you selected has come to an end,

your machine will automatically switch to energy

saving mode. Brightness of indicator lights will

decrease. Also, if your product is equipped with

a display showing the programme duration, this

display will completely turn off. In case of rotating

the Programme Selection knob or pressing any

button, lights and display will restore to their

previous condition. Your selections made while

exiting the energy saving mode may change.

Check the appropriateness of your selections

before starting the programme. Readjust if

necessary. This is not a fault.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

31 / EN

6 Maintenance and cleaning

Service life of the product extends and frequently

faced problems decrease if cleaned at regular

intervals.

protective gloves or use an appropriate brush to

avoid touching the residues in the drawer when

cleaning.

3.Replace the drawer into its housing after

cleaning. Check if the siphon is in its original

location.

6.1 Cleaning the detergent drawer

Remove any powder residue buildup in the

drawer. To do this;

6.2 Cleaning the loading

door and the drum

Residues of softener, detergent and dirt may

accumulate in your machine in time and may

cause unpleasant odours and washing complaints.

To avoid this, use the Drum Cleaning programme.

If your machine is not featured with Drum

Cleaning programme, use Cottons-90 programme

and select Additional water or Extra Rinse

auxiliary functions as well. Run theBefore starting

the programme, put max. 100 g of powder

anti-limescale into the main wash detergent

compartment (compartment nr. 2). If the anti-

limescale is in tablet form, put only one tablet into

compartment nr. 2. Dry the inside of the bellow

with a clean piece of cloth after the programme

has come to an end.

1.You can remove the detergent drawer by pulling

it towards yourself strongly.

Repeat Drum Cleaning process in every

If more than a normal amount of softener

and liquid detergent mixture starts to

remain in the softener compartment, the

2 months.

Use an anti-limescale suitable for the

washing machines.

siphon must be cleaned.

2.Wash the drawer and the siphon with plenty

of lukewarm water in a washbasin. Wear

After every washing make sure that no foreign

substance is left in the drum.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

32 / EN

Maintenance and cleaning

If the holes on the bellow shown in the figure is

blocked, open the holes using a toothpick.

6.5 Draining remaining water

and cleaning the pump filter

The filter system in your machine prevents solid

items such as buttons, coins and fabric fibers

clogging the pump impeller during discharge of

washing water. Thus, the water will be discharged

without any problem and the service life of the

pump will extend.

Foreign metal substances will cause

rust stains in the drum. Clean the stains

on the drum surface by using cleaning

agents for stainless steel. Never use steel

wool or wire wool.

wARNiNg: Never use sponge or scrub

materials. These will damage the painted

A_{and plastic surfaces.}

If the machine fails to drain water, the pump filter

is clogged. Filter must be cleaned whenever it

is clogged or in every 3 months. Water must be

drained off first to clean the pump filter.

In addition, prior to transporting the machine

(e.g., when moving to another house) and in case

of freezing of the water, water may have to be

drained completely.

6.3 Cleaning the body

and control panel

Wipe the body of the machine with soapy water or

non-corrosive mild gel detergents as necessary,

and dry with a soft cloth.

wARNiNg: Foreign substances left

in the pump filter may damage your

A_{machine or may cause noise problem.}

Use only a soft and damp cloth to clean the

control panel.

6.4 Cleaning the water intake filters

There is a filter at the end of each water intake

valve at the rear of the machine and also at the

end of each water intake hose where they are

connected to the tap. These filters prevent foreign

substances and dirt in the water to enter the

washing machine. Filters should be cleaned as

they do get dirty.

In order to clean the dirty filter and discharge the

water:

1.Unplug the machine to cut off the supply power.

wARNiNg: Temperature of the water

inside the machine may rise up to 90 ºC.

A_{To avoid burning risk, filter must be}

cleaned after the water in the machine

cools down.

2.Some of our products have emergency draining

hose and some does not have. Follow the steps

below to discharge the water.

Discharging the water when the product has an

emergency draining hose:

1.Close the taps.

2.Remove the nuts of the water intake hoses to

access the filters on the water intake valves.

Clean them with an appropriate brush. If the

filters are too dirty, take them out by means of

pliers and clean them.

3.Take out the filters on the flat ends of the water

intake hoses together with the gaskets and

clean thoroughly under running water.

4.Replace the gaskets and filters carefully in their

places and tighten the hose nuts by hand.

a. Pull the emergency draining hose out from its

seat

b. Place a large container at the end of the hose.

Drain the water into the container by pulling

out the plug at the end of the hose. When the

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

33 / EN

Maintenance and cleaning

container is full, block the inlet of the hose

by replacing the plug. After the container is

emptied, repeat the above procedure to drain

the water in the machine completely.

c. When draining of water is finished, close the

end by the plug again and fix the hose in its

place.

d. Turn the pump filter to take it out.

Discharging the water when the product does not

have an emergency draining hose:

a. Place a large container in front of the filter to

catch water from the filter.

b. Loosen pump filter (anticlockwise) until water

starts to flow. Fill the flowing water into the

container you have placed in front of the filter.

Always keep a piece of cloth handy to absorb

any spilled water.

c. When the water inside the machine is finished,

take out the filter completely by turning it.

4.Clean any residues inside the filter as well as

fibers, if any, around the pump impeller region.

5.Install the filter.

6.If the filter cap is composed of two pieces, close

the filter cap by pressing on the tab. If it is one

piece, seat the tabs in the lower part into their

places first, and then press the upper part to

close.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

34 / EN

7 Troubleshooting

Problem

Programme cannot be

started or selected.

Reason

Solution

Washing machine has switched to self

Š Press and hold Start / Pause / Cancel

protection mode due to a supply problem (line button for 3 seconds to reset the machine

voltage, water pressure, etc.).

to factory settings. (see. "Cancellation of

program")

Some water might have remained in the

product due to the quality control processes in to the machine.

ŠThis is not a failure; water is not harmful

water in the machine.

the production.

Tap is turned off.

ŠTurn on the taps.

ŠFlatten the hose.

ŠClean the filter.

ŠClose the door.

Machine does not fill with

water.

Water inlet hose is bent.

Water inlet filter is clogged.

Loading door may be open.

Water drain hose might be clogged or twisted. ŠClean or flatten the hose.

Machine does not drain

water.

Pump filter is clogged.

Š Clean the pump filter.

Machine might be standing unbalanced.

ŠAdjust the feet to level the machine.

Machine vibrates or

makes noise.

A hard substance might have entered into the ŠClean the pump filter.

pump filter.

Transportation safety bolts are not removed. ŠRemove the transportation safety bolts.

Laundry quantity in the machine might be

too little.

ŠAdd more laundry to the machine.

Machine might be overloaded with laundry.

Š Take out some of the laundry from the

machine or distribute the load by hand to

balance it homogenously in the machine.

Machine might be leaning on a rigid item.

ŠMake sure that the machine is not leaning

on anything.

Water drain hose might be clogged or twisted. ŠClean or flatten the hose.

Pump filter is clogged. ŠClean the pump filter.

There is water leaking

from the bottom of the

washing machine.

Machine stopped shortly

after the programme

started.

Machine might have stopped temporarily due ŠIt will resume running when the voltage

to low voltage.

restores to the normal level.

Draining hose might not be at adequate

height.

ŠConnect the water draining hose as

described in the operation manual.

Machine directly

discharges the water it

takes in.

The water level is not visible from outside of ŠThis is not a failure.

the washing machine.

No water can be seen

in the machine during

washing.

Door lock is activated because of the water

level in the machine.

ŠDrain the water by running the Pump or

Spin programme.

Loading door cannot be

opened.

Machine is heating up the water or it is at the Š Wait until the programme completes.

spinning cycle.

Child lock is engaged. Door lock will be

deactivated a couple of minutes after the

programme has come to an end.

ŠWait for a couple of minutes for

deactivation of the door lock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

35 / EN

Troubleshooting

Problem

Reason

Water pressure is low.

Solution

ŠMachine waits until taking in adequate

amount of water to prevent poor washing

quality due to the decreased amount

of water. Therefore, the washing time

extends.

washing takes longer

time than specified in the

manual.(*)

Voltage might be low.

ŠWashing time is prolonged to avoid poor

washing results when the supply voltage

is low.

Input temperature of water might be low.

ŠRequired time to heat up the water

extends in cold seasons. Also, washing

time can be lengthened to avoid poor

washing results.

Number of rinses and/or amount of rinse

water might have increased.

ŠMachine increases the amount of rinse

water when good rinsing is needed and

adds an extra rinsing step if necessary.

Excessive foam might have occurred and

automatic foam absorption system might have

been activated due to too much detergent

usage.

Š Use recommended amount of detergent.

Timer may stop during water intake.

ŠTimer indicator will not countdown until

the machine takes in adequate amount of

water. The machine will wait until there is

sufficient amount of water to avoid poor

washing results due to lack of water. Timer

indicator will resume countdown after this.

Programme time does not

countdown. (On models

with display) (*)

Timer may stop during heating step.

Timer may stop during spinning step.

ŠTimer indicator will not countdown

until the machine reaches the selected

temperature.

ŠAutomatic unbalanced load detection

system might be activated due to the

unbalanced distribution of the laundry in

the drum.

There might be unbalanced load in the

machine.

ŠAutomatic unbalanced load detection

system might be activated due to the

unbalanced distribution of the laundry in

the drum.

Programme time does not

countdown. (*)

There might be unbalanced load in the

machine.

ŠAutomatic unbalanced load detection

system might be activated due to the

unbalanced distribution of the laundry in

the drum.

Machine does not switch

to spinning step. (*)

The machine will not spin if water is not

drained completely.

ŠCheck the filter and the draining hose.

Excessive foam might have occurred and

automatic foam absorption system might have

been activated due to too much detergent

usage.

Š Use recommended amount of detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

36 / EN

Troubleshooting

Problem

Reason

Solution

ŠUse the recommended amount of

detergent appropriate for water hardness

and the laundry.

Insufficient amount of detergent has been

used over a long period of time.

washing performance is

poor: Laundry turns gray.

(**)

Washing was made at low temperatures for

a long time.

ŠSelect the proper temperature for the

laundry to be washed.

Insufficient amount of detergent is used with ŠUsing insufficient amount of detergent

hard water.

with hard water causes the soil to stick on

the cloth and this turns the cloth into gray

in time. It is difficult to eliminate graying

once it happens. Use the recommended

amount of detergent appropriate for water

hardness and the laundry.

Too much detergent is used.

ŠUse the recommended amount of

detergent appropriate for water hardness

and the laundry.

Insufficient amount of detergent is used.

Excessive laundry was loaded in.

ŠUse the recommended amount of

detergent appropriate for water hardness

and the laundry.

washing performance is

poor: Stains persist or the

laundry is not whitened.

(**)

ŠDo not load the machine in excess.

Load with amounts recommended in the

"Programme and consumption table".

Wrong programme and temperature were

selected.

ŠSelect the proper programme and

temperature for the laundry to be washed.

Wrong type of detergent is used.

ŠUse original detergent appropriate for the

machine.

Too much detergent is used.

ŠPut the detergent in the correct

compartment. Do not mix the bleaching

agent and the detergent with each other.

Regular drum cleaning is not applied.

ŠClean the drum regularly. For this, please

see 6.2.

washing performance is

poor: Oily stains appeared

on the laundry. (**)

Odours and bacteria layers are formed on

the drum as a result of continuous washing

at lower temperatures and/or in short

programmes.

ŠLeave the detergent drawer as well as

the loading door of the machine ajar after

each washing. Thus, a humid environment

favorable for bacteria cannot occur in the

machine.

washing performance

is poor: Clothes smell

unpleasantly. (**)

Excessive laundry was loaded in.

Detergent in use is damp.

ŠDo not load the machine in excess.

Colour of the clothes

faded. (**)

Š Keep detergents closed in an environment

free of humidity and do not expose them

to excessive temperatures.

A higher temperature is selected.

ŠSelect the proper programme and

temperature according to the type and

soiling degree of the laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

37 / EN

Troubleshooting

Problem

it does not rinse well.

Reason

Solution

The amount, brand and storage conditions of ŠUse a detergent appropriate for the

the detergent used are inappropriate.

washing machine and your laundry. Keep

detergents closed in an environment free

of humidity and do not expose them to

excessive temperatures.

Detergent is put in the wrong compartment.

ŠIf detergent is put in the prewash

compartment although prewash cycle

is not selected, machine can take this

detergent during rinsing or softener

step. Put the detergent in the correct

compartment.

Pump filter is clogged.

ŠCheck the filter.

Drain hose is folded.

ŠCheck the drain hose.

Insufficient amount of detergent is used.

ŠUsing insufficient amount of detergent for

the water hardness can cause the laundry

to become stiff in time. Use appropriate

amount of detergent according to the

water hardness.

Laundry became stiff

after washing. (**)

Detergent is put in the wrong compartment.

ŠIf detergent is put in the prewash

compartment although prewash cycle

is not selected, machine can take this

detergent during rinsing or softener

step. Put the detergent in the correct

compartment.

Detergent might be mixed with the softener. ŠDo not mix the softener with detergent.

Wash and clean the dispenser with hot

water.

Detergent is put in the wrong compartment.

ŠIf detergent is put in the prewash

compartment although prewash cycle

is not selected, machine can take this

detergent during rinsing or softener step.

Wash and clean the dispenser with hot

water. Put the detergent in the correct

compartment.

Laundry does not smell

like the softener. (**)

Detergent might be mixed with the softener. ŠDo not mix the softener with detergent.

Wash and clean the dispenser with hot

water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

38 / EN

Troubleshooting

Problem

Detergent residue in the

detergent drawer. (**)

Reason

Solution

Detergent is put in wet drawer.

ŠDry the detergent drawer before putting

in detergent.

Detergent has gotten damp.

ŠKeep detergents closed in an environment

free of humidity and do not expose them

to excessive temperatures.

Water pressure is low.

ŠCheck the water pressure.

The detergent in the main wash compartment ŠCheck the holes and clean if they are

got wet while taking in the prewash water.

Holes of the detergent compartment are

blocked.

clogged.

There is a problem with the detergent drawer ŠCall the Authorized Service Agent.

valves.

Detergent might be mixed with the softener. ŠDo not mix the softener with detergent.

Wash and clean the dispenser with hot

water.

Regular drum cleaning is not applied.

ŠClean the drum regularly. For this, please

see 6.2.

Improper detergents for the washing machine ŠUse detergents appropriate for the

Too much foam forms in

the machine. (**)

are being used.

washing machine.

Excessive amount of detergent is used.

ŠUse only sufficient amount of detergent.

Detergent was stored under improper

conditions.

ŠStore detergent in a closed and dry

location. Do not store in excessively hot

places.

Some meshed laundry such as tulle may foam ŠUse smaller amounts of detergent for this

too much because of their texture.

type of item.

Detergent is put in the wrong compartment.

ŠPut the detergent in the correct

compartment.

Softener is being taken early.

Too much detergent is used.

ŠThere may be problem in the valves

or in the detergent dispenser. Call the

Authorized Service Agent.

ŠMix 1 tablespoonful softener and ½

l water and pour into the main wash

compartment of the detergent drawer.

Foam is overflowing from

the detergent drawer.

ŠPut detergent into the machine suitable

for the programmes and maximum

loads indicated in the “Programme and

consumption table”. When you use

additional chemicals (stain removers,

bleachs and etc), reduce the amount of

detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

39 / EN

Troubleshooting

Problem

Reason

Solution

ŠUse recommended amount of detergent.

Excessive foam might have occurred and

automatic foam absorption system might have

been activated due to too much detergent

usage.

Laundry remains

wet at the end of the

programme. (*)

(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be

rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean the drum regularly. See 6.2

CAUTiON: If you cannot eliminate the problem although you follow the instructions in this section,

consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

40 / EN

8 BUILT-IN INSTALLATION

820 mm

14 mm

153 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

41 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

42 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

43 / EN

26 mm

338 mm

26 mm

190 mm

338 mm

190 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

44 / EN

IF THE CABINET DOOR OPENS TO RIGHT

IF THE CABINET DOOR OPENS TO LEFT

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

45 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

46 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

47 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

48 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

49 / EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing Machine /User’s Manual

50 / EN

Service

Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it

should the product require attention under guarantee.

You should also complete the details below; it will help us assist you when requesting service. (The

model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label

affixed to the appliance)

Model No:

Serial No:

Retailer:

Date of purchase:

For service under guarantee simply telephone the appropriate number below

UK Mainland & Northern Ireland

Fridges & Freezers

Electric Cookers

Gas &

0845 600 4903

0845 600 4902

0845 600 4905

Dual Fuel Cookers

Washing Machines &

Dishwashers

0845 600 4906

Republic of Ireland

All Refrigeration, 01 862 3411

All Cookers

Washing Machines & Dishwashers

Before requesting service please check the trouble-shooting guide in the Operating Instructions as a

charge may be levied where no fault is found even though your product may still be under guarantee.

Service once the manufacturers guarantee has expired.

If you have purchased an extended guarantee please refer to the instructions contained within the

extended guarantee agreement document. Otherwise please call the appropriate number above where

service can be obtained at a charge.

Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.

Tel: 0845 600 4911

e-mail:[email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

Guarantee

Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the

date of the original purchase.

what is covered?

• Repairs necessary as a result of faulty materials, defective components or manufacturing defect.

• The cost of functional replacement parts, but excluding consumable items.

• The labour costs of a Beko approved repairer to carry out the repair.

what is not covered?

• Transit, delivery or accidental damage or misuse and abuse.

• Cabinet or appearance parts, including knobs, flaps, handles or container lids.

• Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets,

filters and light bulbs.

• Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the

requirements contained in the user instruction book.

• Repairs to products used on commercial or non-residential household premises.

• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included within your

household contents insurance policy, or may be available separately from your retailer).

important notes.

• Your Beko product is designed and built for domestic household use only.

• The guarantee will be void if the product is installed or used in commercial or non-residential

domestic household premises.

• The product must be correctly installed, located and operated in accordance with the instructions

contained in the User Instructions Booklet provided.

• Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all

Washing Machines, Dishwashers and Electric Cookers

• Gas Cookers must only be installed by a CORGI (or BORD GAIS) registered Gas Installer.

• The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland.

• The guarantee is applicable only to new products and is not transferable if the product is resold.

• Beko disclaims any liability for incidental or consequential damages.

• The guarantee does not in anyway diminish your statutory or legal rights.

Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.

Tel: 0845 600 4911

e-mail:[email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

www.beko.com

Belkin Bluetooth Headset F8T061 User Manual
Beltronics Radar Detector PRO RX65 User Manual
Bosch Appliances Home Care Product F01U252722 User Manual
BreatheAudio Garage Door Opener BA LRC1 User Manual
Brother Sewing Machine CS 8060 User Manual
Calphalon Grill Accessory HE600CG User Manual
Campbell Hausfeld Staple Gun IN729300AV User Manual
Cannon All in One Printer MX340 User Manual
Cannon Electric Pressure Cooker 10390G Mk2 User Manual
Carrier Gas Heater 48HC User Manual