2012 CXY
Washing Machine
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 Your Washing Machine
4
Overview . . . . . . . . . . . . . . . . . . . . . . .4
Specifications . . . . . . . . . . . . . . . . . . .5
6 Quick instructions for daily
use
21
23
3 Installation
8
7 Cleaning and care
Removing packaging reinforcement. . .8
Opening the transportation locks. . . . .8
Appropriate installation location . . . . . .8
Adjusting the feet. . . . . . . . . . . . . . . . .8
Connecting to the water supply. . . . . .8
Connecting to the drain . . . . . . . . . . . .9
Electrical connection . . . . . . . . . . . . .10
Destroying the packaging material. . .10
Disposing of the old machine. . . . . . .10
Detergent drawer. . . . . . . . . . . . . . . .23
The door and the drum . . . . . . . . . . .23
Outer cabinet and control panel. . . . .23
Inlet water filters. . . . . . . . . . . . . . . . .23
Draining any remaining water and
cleaning the pump filter . . . . . . . . . . .24
8 Solution suggestions for
problems
26
4 Initial preparations for
washing
11
Sorting the laundry . . . . . . . . . . . . . .11
Preparing clothes for washing . . . . . .11
Correct load capacity . . . . . . . . . . . .12
Loading door. . . . . . . . . . . . . . . . . . .12
Detergents and softeners . . . . . . . . .12
5 Selecting a Program and
Operating Your Machine
14
Control panel. . . . . . . . . . . . . . . . . . .14
Turning the machine on . . . . . . . . . . .15
Program selection . . . . . . . . . . . . . . .15
Spin Speed selection. . . . . . . . . . . . .16
Program selection and consumption
table . . . . . . . . . . . . . . . . . . . . . . . . .17
Auxiliary functions . . . . . . . . . . . . . . .18
Starting the Program . . . . . . . . . . . . .18
Progressing a program . . . . . . . . . . .18
Changing the program after the program
has started . . . . . . . . . . . . . . . . . . . .19
Child-proof lock. . . . . . . . . . . . . . . . .20
Ending the program through
canceling. . . . . . . . . . . . . . . . . . . . . .20
End of Program . . . . . . . . . . . . . . . . .20
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Your Washing Machine
Overview
3
4
1
2
5
6
1 - Detergent Drawer
2 - Door
4 - Control Panel
5 - Filter Cap
3 - Top Lid
6 - Height-adjustable feet
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Models
2012 CXY
Maximum dry laundry capacity (kg)
Height (cm)
5
84
Width (cm)
60
Depth (cm)
45
Net Weight (±4 kg)
Electricity (V/Hz.)
Total Current (A)
Total Power (W)
Spinning cycle (rpm max.)
60
220-240 V / 50Hz
10
2000-2350
600
Specifications of this appliance may change without notice to improve the quality of
the product. Figures in this manual are schematic and may not match your product
exactly.
Values stated on the machine labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, values may vary.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2 Warnings
Please read the following information.
Otherwise, there may be the risk of
personal injury or material damage.
Moreover, any warranty and reliability
commitment will become void.
•
•
There may be some water in your
machine when you receive it. This is
from the quality control process and
is normal. It is not harmful to your
machine.
Some problems you may encounter
may be caused by the software.
Press “Start/Pause/Cancel” button
for 3 seconds to cancel the program
set in your machine before calling
the authorized service.
General Safety
•
Never place your machine on a
carpet covered floor. Otherwise,
lack of airflow from below of your
machine may cause electrical
parts to overheat. This may cause
problems with your washing
machine.
First Use
•
To prepare your machine for
•
•
If the power cable or mains plug is
damaged you must call Authorized
Service for repair.
washing, carry out your first washing
process without loading your
machine and with detergent under
“Cottons 90°C” program.
Check water hoses for wear. Do
not use old/used water inlet hoses.
These may cause stains on your
laundry.
•
Ensure that the cold and hot water
connections has been made
correctly when installing your
machine. Otherwise, your laundry
may come out hot at the end of the
washing process and may wear out.
•
Fit the drain hose into the discharge
housing securely to prevent any
water leakage and to allow machine
to take in and discharge water as
required. It is very important that the
water intake and drain hoses are not
folded, squeezed, or broken when
the appliance is pushed into place
after it is installed or cleaned.
•
•
If the current fuse or circuit breaker
is less than 16 Amperes, please
have a qualified electrician install a
16 Ampere fuse or circuit breaker.
While using with or without a
transformer, do not neglect to have
the grounding installation laid by a
qualified electrician. Our company
shall not be liable for any damages
that may arise when the machine is
used on a line without grounding.
•
Your washing machine is designed
to continue operating in the event
of a power interruption. You cannot
cancel any program by pressing the
“On/Off button.” Your machine will
not resume its program when the
power restores. Press the “Start/
Pause/Cancel” button for 3 seconds
to cancel the program (See,
•
To make your machine ready for
use, please be sure that the tap
water supply and water drainage
systems are appropriate before
calling the authorized service. If they
Cancelling a Program)
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
are not, call a qualified plumber to
have any necessary arrangements
carried out.
drum. Otherwise, there may be the
risk of flooding and possible injury
due to the hot water.
•
Never force open the locked door!
The door will be ready to open just a
few minutes after the washing cycle
comes to an end.
Intended use
•
This product has been designed for
home use.
•
•
Unplug the machine when it is not in
use.
•
The appliance may only be used for
washing and rinsing of textiles that
are marked accordingly.
Never wash down the appliance
with a water hose! There is the risk
of electric shock! Always disconnect
from the mains by unplugging before
cleaning.
•
•
Only detergents, softeners and
supplements suitable for washing
machines may be used.
•
Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out from the plug only. Do
not operate the machine if the power
cord or plug is damaged.
Observe the care instructions labelled
on textile products and any other
instructions given by companies that
produce detergents for your machine.
•
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
•
•
Never attempt to repair the machine
yourself. Otherwise, you may be
putting yours and other’s lives in
danger.
For malfunctions that cannot be
solved by information in the operating
manual:
Turn off the machine, unplug it, turn
off the water tap and contact an
authorized service agent.
Safety instructions
•
•
•
This appliance must be connected to
an earthed outlet protected by a fuse
of suitable capacity.
If there are children
in your house...
The supply and draining hoses must
always be securely fastened and
remain in an undamaged state.
•
Electrical appliances may be
dangerous for the children. Keep
children away from the machine
when it is operating. Do not let them
tamper with the machine.
Fit the draining hose to a washbasin
or bathtub securely before starting up
your machine. There may be a risk of
being scalded due to high washing
temperatures!
•
•
Close the door when you leave the
area where the machine is located.
•
Never open the door or remove the
filter while there is still water in the
Store all detergents in a safe place
out of reach of the children.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7
3 Installation
C Keep the transportation safety
bolts in a safe place to reuse when
the washing machine needs to be
moved again in the future.
C Never move the appliance without
the transportation safety bolts
properly fixed in place!
Removing packaging
reinforcement
Tilt the machine to remove the
packaging reinforcement. Remove the
packaging reinforcement by pulling the
ribbon.
Appropriate installation
location
Install the appliance in environments
which have no risk of freezing, in a
stable and level position.
C The floor must be capable of
carrying the load on it!
C If the washing machine and a drier
are placed on top of each other, their
approximate weight together may
reach 180 kg when they are full.
Important:
•
•
•
Do not place the appliance on top of
the power cable.
Opening the transportation
locks
Keep at least 1cm distance from the
edges of other furniture.
C Transportation safety bolts must
be removed before operating the
washing machine! Otherwise, the
machine will be damaged!
Place the machine on a firm surface;
do not position it on a long pile rug
or such like surfaces.
1. Loosen all the bolts with a spanner
Adjusting the feet
C Do not use any tools to loosen the
lock nuts. Otherwise, they can be
damaged.
until they rotate freely (“C”)
1. Manually (by hand) loosen the lock
nuts on the feet.
2. Adjust them until the machine stands
level and firm.
3. Important: Tighten all lock nuts up
again.
2. Remove transportation safety bolts
by turning them gently.
3. Fit the covers (supplied in the bag
with the Operation Manual) into the
holes on the rear panel. (“P”)
Connecting to the water
supply.
Important:
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
The water supply pressure required
to run the machine must be 1-10 bar
(0,1 – 1,0 MPa). Attach a pressure-
reducing valve if the water pressure
is higher.
Connect the special hoses supplied
with the machine to the water intake
valves on the machine. The hose
bearing the “red” sign (90°C max)
is the hot water inlet and the hose
bearing the “blue” sign (25°C max) is
for the cold water inlet.
•
Models with a single water inlet
should not be connected to the hot
water tap. Laundry may be damaged
or the appliance may switch to
protection mode and not work.
When returning the appliance to its
place after maintenance or cleaning,
care should be taken not to fold,
squeeze or block the hoses.
Connecting to the drain
The water discharge hose can be
attached to the edge of a washbasin or
bathtub. The drain hose should be firmly
fitted into the drain as to not loosen in
its housing.
•
If you are going to use your double
water-inlet machine as a single (cold)
water-inlet unit, you must install the
stopper*, supplied with your machine
to the hot water valve.
If you want to use both water inlets
of the product, you can connect the
hot water hose after removing the
stopper and gasket group from the
hot water valve.
* Applies for the products supplied
with a blind stopper group.
Open the taps completely after
making the hose connection to
check if there is any water leakage
at the connection points. Turn off
the tap and remove the nut in case
of any leakage. Retighten the nut
carefully after checking the seal.
To prevent any water leakage and
any other damage to be caused by
it, keep the taps closed when the
machine is not in use.
Important:
•
The end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The
fitting must be secured in all types
of connections. Your house may be
flooded if the hose falls out of its
housing during water discharging.
The hose should be attached to a
height of at least 40 cm, and 100 cm
at most.
•
•
•
In case the hose is elevated
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9
after laying it on the floor level or
close to the ground (less than
40 cm above the ground), water
discharge becomes more difficult
and the laundry may come out wet.
Therefore, the heights described in
the figure should be followed.
To prevent dirty water refilling the
machine, and to allow for easy
discharge, the end of the hose must
not be submerged in the drain water.
The end of the hose must be able
to take in air. The hose should be
pushed into the drainage for more
than 15 cm. If it is too long you may
have it shortened.
unless it is repaired! There is the risk
of electric shock!
Destroying the packaging
material
Packaging material can be dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to
waste directives. Do not dispose them
together with normal domestic waste.
Packaging materials of your machine are
manufactured from recyclable materials.
•
Disposing of the old machine
Dispose of your old appliance in an
environmental friendly manner.
•
•
The end of the hose should not be
bent, it should not be stepped on
and it must not be folded between
the drain and the machine.
•
You may refer to your local agent or
solid waste collection center in your
municipality to learn how to dispose
of your machine.
The length of the hose is too short,
you may add an extension hose to
the original section. The length of the
hose must not be longer than 3.2
m after coming out of the machine.
To avoid water leakage failures, the
connection between the extension
hose and the drain hose of the
product must be fitted well with an
appropriate clamp as not to come
off and leak.
Before disposing of your old washing
machine, cut off the mains plug and
make the door lock unusable.
Electrical connection
Connect the machine to an earthed
outlet protected by a fuse of suitable
capacity.
Important:
•
•
•
Connection should comply with
national regulations.
Power cord plug must be within easy
reach after installation.
The voltage and the allowed fuse
protection are specified in the
section “Technical Specifications”.
The specified voltage must be equal
to your mains voltage.
Connection via extension cords or
multi-plugs should not be made.
•
•
B A damaged power cable must be
replaced by a qualified electrician.
B The appliance must not be operated
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Initial preparations for washing
Sorting the laundry
•
Sort the laundry according to type of
fabric, colour, and degree of soiling
and permissible water temperature.
Always follow the advice on the
garment labels.
Non machine
washable
Washing water
Wash with
Do not wash
temperature sensitive, short
programmes.
•
•
Empty pockets and remove all
foreign objects such as coins, pens
and paper clips. If possible, turn
pockets out and brush.
Place small items like infants’ socks
and nylon stockings, etc. in a laundry
bag, pillow case or something similar.
This will also save your laundry from
getting lost.
Place curtains in the machine with
care. Remove curtain rails and
pullers.
Fasten zippers, sew loose buttons
and mend rips and tears.
Wash “machine washable” or “hand
washable” labelled products only
with an appropriate Programme.
Do not wash colours and whites
together. New, dark coloured cottons
may release a lot of dye. Wash them
separately.
Tough stains must be treated
properly before washing. If you are
not sure, check with a dry cleaner.
Use only dyes/colour changers and
lime removers suitable for machine
wash. Always follow the instructions
on the packaging.
Bleach can be Do not use
Dry-cleanable
Do not
used
bleach
dry-clean
•
Suitable for
drier
Do not dry
with drier
Dry
horizontally
Dry on a
hanger
•
•
Hang without Can be ironed
Can be
Do not iron
spinning
with hot iron ironed with
warm iron
•
Preparing clothes for washing
Laundry items with metal attachments
such as, bras, belt buckles and metal
buttons will damage the machine.
Remove metal attachments or place the
items in a clothing bag, pillow case, or
something similar.
•
•
•
•
Wash trousers and delicate clothes
turned inside out.
Keep laundry items made of Angora
wool in the freezer for a few hours
before washing. This will reduce
pilling.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
11
different types according to the model of
your machine.
Correct load capacity
•
The maximum load capacity
- (I) for prewash
depends on the type of laundry, the
degree of soiling and the washing
Programme you wish to use.
- (II) for main wash
- (III) siphon
– ( ) for softener
C The machine adjusts the amount of
water according to the amount of
laundry placed inside.
C Please follow the information in
the "Programme Selection Table".
Washing results will degrade when
the machine is overloaded.
Following weights are given as
examples.
Detergent, softener and other
cleaning agents
Add detergent and softener before
starting the washing Programme.
Never open the detergent dispenser
drawer while the washing Programme is
running!
When using a Programme without
pre-wash, no detergent should be
put into the pre-wash compartment
(Compartment no. I).
A Programme without pre-wash should
be selected if a detergent bag or a
dispensing ball is going to be used.
You can place the detergent bag or
the dispensing ball directly among the
laundry in your machine.
Laundry type
Bathrobe
Napkin
Weight (gr.)
1200
100
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
700
500
200
250
200
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pyjamas
Blouse
200
100
600
200
500
100
Choosing the detergent type
The type of detergent to be used
depends on the type and colour of
fabric.
Loading door
The door is locked during Programme
operation. The door can be opened after
some time following the Programme
end.
•
•
•
Use different detergents for coloured
and white clothes.
•
•
Open the door.
Place laundry items loosely in the
machine.
Wash woollen with a special
detergent specifically for woollens.
Use only detergents manufactured
specifically for automatic washing
machines.
•
Push the door until it clicks into
place tightly. Ensure that no items
are caught in the door.
Detergent quantity
The amount of washing detergent to
be used depends on the amount of
laundry, the degree of soiling and water
hardness.
Detergents and softeners
Detergent drawer
The detergent drawer is composed of
three compartments:
The detergent dispenser may be in two
•
Do not use amounts exceeding
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
the quantities recommended on
the package to avoid problems
of excessive foam, poor rinsing,
financial savings and finally,
environmental protection.
Use small amounts of detergent at a
suitable measure for small amounts
of laundry or for only slightly soiled
laundry.
Use exact measures for highly
concentrated detergents.
package.
•
•
Never use fabric softener and starch
together in the same washing cycle.
Wipe the inside of the drum after
using starch.
•
•
Eliminating lime formation
•
When required, use only appropriate
lime removers developed specifically
for washing machines and always
follow the instructions on the
package.
Detergent
quantity
1/2 measure
1 measure
for prewashing
for main washing
an additional 1/2
measure
with hard water
Softener
Put the softener into the softener
compartment of the detergent dispenser.
•
•
Use the proportions recommended
on the packet.
Never exceed the (> max <) level
marking; otherwise, the softener will
be wasted without being used.
If the softener has lost its fluidity,
dilute dense softener with water
before placing it in the detergent
drawer.
•
Liquid detergent
When using liquid or gel washing
detergents, please note the following:
•
•
The liquid detergent may leave stains
on your laundry if time delay feature
is selected.
Do not use liquid detergent if you
want to wash using the time delay
feature.
•
•
Do not use liquid detergent for the
main wash in a cycle with pre-wash.
Use the detergent manufacturer’s
measuring cup and follow the
instructions on the package.
Starch
•
Add liquid starch, powder starch
or the fabric dye into the softener
compartment as instructed on the
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
13
5 Selecting a Program and Operating Your Machine
Control panel
7
8
9
12
14
13
7 - On/Off Button
8 - Door Indicator *
9 - Program Follow-up Indicator
10 - Spin Speed Adjustment Knob *
11 - Temperature Adjustment Knob *
12 - Program Selection Knob
13 - Auxiliary Function Keys
14 - Start/Pause/Cancel Button
* According to your machine’s model
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
14
C Always select the lowest required
temperature. Higher temperature
means higher power consumption.
C For further program details, see,
“Program Selection Table”
Turning the machine on
You can prepare the machine for
program selection by pressing the
the “On/Off” button. When the “On/
Off” button is pressed, the “Lid” light
illuminates indicating that the door is
unlocked. Press the “On/Off” button
again to shut down the machine.
C Pressing the “On/Off” button does
not necessarily mean that the
program has started. Press "Start/
Pause/Cancel" button to start the
program.
Main programs
Depending on the type of textile, the
following main programs are available:
• Pamuklu (Cottons)
You can wash your durable clothes with
this program. Washes with vigorous
washing movements in a longer
washing cycle. It is recommended for
your cotton items (such as bed sheets,
duvet and pillowcase sets, bathrobes,
underclothing, etc.).
Program selection
Select the appropriate program from the
program table and the following washing
temperature table according to type,
amount and degree of soiling of the
laundry. Select the desired program with
the program selection button.
• Sentetik (Synthetics)
You can wash your less durable clothes
on this program. Washes with gentler
washing movements and in shorter
washing cycles. It is recommended for
your synthetic clothes (such as shirts,
blouses, synthetic/cotton blended
garments, etc.). For curtains and lace,
using the “Synthetic 40” program with
pre-wash and anti-creasing functions
selected is recommended. Detergent
should not be put in the pre-wash
compartment. Less detergent should be
put in the main wash compartment as
loose knit fabrics (lace) foam too much
due to its meshed structure.
C Each of these main programmes
comprise of a complete washing
process, including washing, rinsing
and, if required, spin cycles.
Normally soiled, white
cottons and linens. (Ex.:
90˚C
60˚C
coffee table covers,
tablecloths, towels, bed
sheets)
Normally soiled, fade proof
colored linens, cottons
or synthetic clothes
(Ex.: shirts, nightgowns,
pajamas) and lightly soiled
white linen clothes (Ex.:
underwear)
• Yünlü (Woollens)
You can wash your machine-washable
woolen garments on this program. Wash
by selecting the proper temperature
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woolens.
For delicate clothes (Ex.:
lace curtains), blended
clothes including synthetics
and woolens.
40˚C
30°C
Cold
Additional programs
For special cases, there are also extra
programs available:
C Additional programs may differ
according to the features of your
machine.
C Programs are limited with the highest
spin speed appropriate for that
particular type of cloth.
C Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature when
choosing a program.
• Narin (Delicate)
You can wash your delicate clothes
on this program. It has more sensitive
washing movements and does not
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
15
make intermediate spinning compared
to the synthetic program. It must be
used for clothes for which sensitive
washing is recommended.
spin in the maximum possible rpm in the
default setting of the selected program.
• Elde Yıkama (Hand wash)
You can wash your woolen/delicate
clothes that bear “not machine-
washable” labels for which hand wash
is recommended on this program. It
washes the laundry with very tender
washing movements without damaging
your clothes.
• Mini 30
This program is used to quickly wash
(30 minutes) a small amount of lightly
soiled cotton garments.
• Eko 40
This program washes for a longer period
at 40°C and gives the same result as
the “Cottons 60°C” program, thus it
saves energy. It is suitable for clothes for
which you cannot use the “Cottons 60
°C” program.
Special programs
For specific applications, you can select
any of the following programs:
• Durulama (Rinse)
This program is used when you want to
rinse or starch separately.
• Sıkma+Pompa (Spin + Drain)
This program spins with maximum
possible rpm in the default setting after
the water drains from the machine.
C You should use a lower spin speed
for delicate laundries.
Spin Speed selection
You can have your clothes spin at
the maximum rpm selection on your
machine by using the selection knob in
models equipped with an rpm selection
knob. In order to protect your clothes,
your machine will not spin above 800
rpm on synthetic programs and 600
rpm on woolens program. Furthermore,
if you want to skip the spin cycle and
take your clothes out, turn the rpm
selection knob to “no spin” position.
In machines not equipped with a spin
speed selection knob, the machine will
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Program selection and consumption table
EN
Auxiliary functions
2
Programme
Pamuklu
Pamuklu
Pamuklu
Eko 40
90
60**
40
5
5
133
145
142
165
113
125
65
45
49
49
45
52
52
45
1.65
0.85
0.69
0.78
0.92
0.56
0.36
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5
40
5
Sentetik
Sentetik
Narin
60
2.5
2.5
2
•
•
•
•
•
•
•
•
40
30
Yünlü
40
30
30
1.5
1
60
45
30
45
32
43
0.36
0.21
0.17
•
•
•
•
•
•
•
•
•
•
•
Elde Yıkama
Mini 30
2.5
• : Selectable
* : Automatically selected, not cancellable.
**: Energy Label programme (EN 60456)
Water and power consumption and programme duration may differ from the table
shown, subject to changes in water pressure, water hardness and temperature,
ambient temperature, type and amount of laundry, selection of auxiliary functions,
and fluctuations in the supply voltage.
C The auxiliary functions in the table may differ according to the model of your
machine.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Cancel” button for 3 sec.
Auxiliary functions
•
In the machines equipped with spin
speed selection knob or button, you
can spin by selecting the desired
spin speed and press “Start/Pause/
Cancel” button.
Auxiliary function selection keys
•
•
•
Desired auxiliary function depending
on the program is selected.
Some combinations cannot be
selected together.
Warning signal on the selected
auxiliary function will light up.
•
As for machines not equipped with
a spin speed selection knob, you
can end the program without a
spin cycle by pressing the “Start/
Pause/Cancel” button and draining
the water. If you wish your clothes
be spun, you can spin them by
selecting “pump+spin” program.
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
• No Heat
If you wish to wash your clothes in cold
water, you can use this program.
• No Spin
You may use this program if you do not
want to spin your clothes at the end of
cottons, synthetics, woolen or delicate
programs.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Selection Table”)
• Spin speed reduction
You may use the speed reduction button
whenever you wish to spin your clothes
below the maximum spin speed. When
speed reduction button is pressed, spin
speed will be at the minimum rpm given
on the panel.
• Ön Yıkama (Prewash)
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and time.
C Pre-wash without detergent is
recommended for lace and curtains.
Less detergent should be put in the
main wash compartment as loose
Starting the Program
knit fabrics (lace) foam too much due 1. Press “Start/Pause/Cancel” button
to its meshed structure.
• İlave Durulama (Rinse Plus)
to start the program.
2. “Start/Pause/Cancel” button will light
up to indicate that the program has
started.
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by
the remainder detergent on the clothes
will be decreased.
3. The door is locked and the “Lid” light
fades.
• Suda Bırakma (Rinse Hold)
Progressing a program
If you do not want to unload your
clothes immediately after the cotton,
synthetics, woolen and delicate fabrics
program, you may release your clothes
inside the machine in the last rinsing
water by pressing the rinse hold button
in order to prevent your clothes become
wrinkled. After this process you may
spin your laundry by pressing “Start/
Pause/Cancel” button or you may end
the program by pressing “Start/Pause/
Progress of a running program is shown
through the program follow-up indicator.
•
At the beginning of every program
step, the relevant indicator lamp will
light up and light of the completed
step will turn off. The symbol that is
lit up at the far right of the series of
symbols indicates the step that is
being carried out.
The “Wash” light on the program follow-
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
up indicator illuminates when “Start/
Pause/Cancel” button is pressed after
selecting the washing program. The
“Program finished” lamp illuminates
and the “Wash” light will fade when the
program comes to an end. The “Lid”
light flashes. Meanwhile, the door will
stay locked for your safety and when it
is safe to open, the “Lid” and “Program
Finished” lights remain on.
Press “Start/Pause/Cancel” button to
start the program.
C The program which is selected
first will go on even if the program
selection button is moved and
another program mode is selected
while the machine is operating. You
must cancel the ongoing program
in order to change the washing
program. (See, Canceling a Program)
You can put your machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button when it is operating.
In this case, the “Start/Pause/Cancel”
light will flash. Some changes in
program settings can be made in pause
mode (See. Changing a Program)
and if “Pause” mode is entered at an
appropriate step of the program, the
adding laundry function may be used.
(See, Adding and taking out laundry).
Press “Start/Pause/Cancel” button
again to return to the “Wash” mode
from “Pause” mode. In this case the
“Start/Pause/Cancel” button will light
up continuously and the machine will
resume operating from the step it was
paused.
Selecting or cancelling an auxiliary
function/temperature/spin speed
1. Press the “Start/Pause/Cancel”
button to switch the machine to
“Pause” mode.
2. Change the auxiliary function’s
temperature and spin speed.
Press “Start/Pause/Cancel” button to
start the program.
C The selection to be made must be
appropriate. For example, if your
machine is on the main wash cycle,
you may select additional rinse
auxiliary function, but you cannot
select pre-wash.
C The spin speed and temperature
which are selected first will keep on
being valid even if the position of the
spin speed or temperature selection
knob is changed. Press the “Start/
Pause/Cancel” button and switch
the machine to “Pause” mode in
order to change the spin speed or
temperature. New spin speed or
temperature can be selected.
•If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of unbalanced distribution of laundry
in the machine.
Changing the program after
the program has started
You can use this feature after your
machine has started to wash different
textile groups in the same batch
of clothes under higher or lower
temperatures.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started, put the machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button. The “Lid” lamp on the
program follow-up indicator will light up
steadily after 1-2 minutes if the water
level in the machine is suitable. Laundry
may be added or taken out by opening
the door. If the “Lid” lamp does not
For example;
Press and hold the “Start/Pause/
Cancel” button for 3 seconds to
“Cancel” the program in order to select
“Cottons 40” program instead of
“Cottons 60” program.
Select the “Cottons 40” program by
rotating the program knob.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
19
light up continuously at the end of this
time, the water level in the machine
is not suitable and laundry cannot be
added. You can resume the program
by pressing the “Start/Pause/Cancel”
button again.
•
•
“Lid” lamp will light up continuously
when the door is unlocked. You can
select and start a new program.
If the program is cancelled in the
middle of the process, “Wash”
and “Program Finished” lights will
light up. The machine can drain
all the water or can take in water
for 3 times at most to cool down
the clothes and complete draining
process.
When the water discharging process
is completed, the “Wash” light will
go off, “Program Finished” light
will light up and the “Lid” light will
continuously flash until the door
is unlocked. You can make a new
program selection when the “Lid”
light is illuminated continuously.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on.
•
C Your machine can be turned on
and off with On/Off button while
the child-proof lock is activated. In
this case, your machine will resume
its program with child-proof lock
activated.
In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
End of Program
The “Program Finished” lamp on the
program follow-up indicator will light up
when the program comes to an end.
The lid is unlocked 2 minutes later, the
“Program Finished” and “Lid” lamps will
light up continuously. The machine is
now ready for a second cycle.
If any key is pressed when the machine
is at the end of the program or if
the position of the selection knob is
changed, the “Program Finished” light
will go off and only the “Lid” lamp will
remain as lit. Meanwhile, if the door is
still locked, the “Lid” light will continue
flashing until the door is opened.
Press the “On/Off” button to shut down
the machine.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
new program can be selected or started
after “Program is cancelled” in order to
change the washing program.
To cancel any selected program;
•
Press “Start/Pause/Cancel” button
for 3 seconds. The machine starts
to discharge the water. “Wash” and
“Program Finished” lights will light
up.
“Start/Pause/Cancel” and “Wash”
lights will go off after discharging
process is over and the “Lid” light
will start flashing.
•
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Quick instructions for daily use
Preparation
during a later step only if the water
level is low enough to open the
loading door or if the temperature in
the machine is low enough.
1. Turn the tap on completely. Check if
the hoses are connected tightly.
2. Place the laundry in the machine.
3. Add detergent and softener.
In order to add laundry after the start-up
of the program:
Starting
1. Press Start/Pause/Cancel button.
Wait until the door is allowed to open.
“Lid” lamp will light up continuously
when the door is allowed to open.
2. Open the loading door and put in
more laundry.
1. Press the “On/Off” button.
2. Select the programme and the
temperature.
3. If required (according to your
machine’s model):
–
–
–
select any auxiliary function,
adjust the spin speed,
set the time delay,
3. Close the loading door.
4. Press Start/Pause/Cancel button.
4. Close the loading door.
Program is in rinse hold mode
C After the machine fills with water in the
final rinse step, clothes can be soaked
in the machine as long as desired.
When it reaches this position while the
machine is running, the “Start/Pause/
Cancel” light will flash.
In the machines equipped with spin
speed selection knob, you can spin by
selecting the desired spin speed and
press “Start/Pause/Cancel” button.
As for machines not equipped with a spin
speed selection knob, you can end the
program without spinning by pressing
the “Start/Pause/Cancel” button to drain
the water. You may spin your clothes
whenever you wish to by selecting the
spin program.
5. Press Start/Pause/Cancel button.
Canceling a program
•
Press “Start/Pause/Cancel” button
for 3 seconds. The machine starts
to discharge the water. “Wash” and
“Program Finished” lights will light
up.
•
•
“Start/Pause/Cancel” and “Wash”
lights will go off after discharging
process is over and the “Lid” light
will start flashing.
If the program is cancelled in the
middle of the process, “Wash”
and “Program Finished” lights will
light up. The machine can drain
all the water or can take in water
for 3 times at most to cool down
the clothes and complete draining
process. When water discharging
process is completed, “Wash” light
will go off, “Program Finished” light
will light up and the “Lid” light will
continuously flash until the door
is allowed to be opened. You can
make a new program selection when
the “Lid” light is lit continuously.
Re-spinning the laundry
The control system for an unbalanced
load can pause the spinning in cases
when the distribution of the laundry in the
drum is not balanced.
If you want to re-spin the clothes:
1. Rearrange the previously placed
clothes in machine.
2. Select Spin+Pump program.
3. Set the spin speed if spin speed
adjustment is available on your
machine.
Adding more laundry
You may add more laundry into the
machine at the beginning of washing.
4. Press “Start/Pause/Cancel” button.
C Machine allows adding more laundry
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
21
After the program is finished
1. “Program finished” lamp will light
up on the program follow-up
indicator. The lid can be opened
after 2 minutes when the “Program
Finished” and “Lid” lamps light up
continuously.
2. Press the On/Off button to shut
down the machine.
3. Turn the water tap off.
4. Eliminate any folding of the rubber
seal on the loading door and check
for impurities.
5. Leave the loading door and
detergent drawer open to dry.
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Cleaning and care
such cases:
Detergent drawer
Clean the drum with a stainless steel
cleaning agent. Never use steel wool
or wire wool.
Remove any powder residue buildup in
the drawer. To do this;
1. Press the dotted point on the siphon
in the softener compartment and pull
towards you until the compartment
is removed from the machine.
Outer cabinet and control
panel
When necessary:
•
Wipe the exterior panels of your
machine with soapy water or mild
detergent. Dry it with a soft cloth.
Use only a soft and damp cloth to
clean the control panel.
•
C Never use a sponge or scrubbing
material. These will damage the
painted and plastic parts.
C If more than a normal amount of
water and softener mixture starts to
gather in the softener compartment,
the siphon must be cleaned.
2. Wash the dispenser drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective
gloves or use an appropriate brush
to avoid touching the residues in the
drawer when cleaning.
Inlet water filters
There is a filter at the end of each
water intake valve at the back side of
the machine and also at the end of
each water intake hose where they
are connected to the tap. These filters
prevent the foreign substances and dirt
in the water to enter into the machine.
Filters should be cleaned as they get
dirty.
3. Replace the drawer into its housing
after cleaning. Check if the siphon is
in its original location.
The door and the drum
After each wash:
•
Check if there are any foreign
substances in the drum.
Open the hole in the bellow with the
aid of a toothpick if it is clogged.
•
•
•
Close the taps.
Remove the nuts of the water intake
hoses to clean the surfaces of the
filters on the water intake valves with
an appropriate brush.
•
If the filters are very dirty, you can
pull them out by means of pliers and
clean them.
C Foreign metal substances in your
machine can cause rust stains. In
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
23
•
•
Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly
under streaming water.
Replace the gaskets and filters
carefully and tighten the hose nuts
by hand.
Draining any remaining water
and cleaning the pump filter
Filter system in your machine prevents
solid items such as buttons, coins and
fabric fibers clogging the pump propeller
during discharging of the washing
If it is composed of one piece, hold it
from both sides and open it by pulling
out.
C You can remove the filter cover
by slightly pushing the kick plate
downwards with a screwdriver,
through the gap above the filter
cover.
water. Thus, a good water discharge is
achieved and the pump life is extended.
•
If your machine fails to drain the
water, the pump filter may be
clogged. You may have to clean
it every 2 years or whenever it is
blocked plugged. Water must be
drained off to clean the pump filter.
In addition, water may have to be
drained off completely in the
following cases:
•
before transporting the machine (e.g.
when moving house)
3- An emergency drain hose is supplied
with some of our models. Others are not
supplied with this item.
•
when there is the danger of frost
In order to clean the dirty filter and
discharge the water;
1- Disconnect or unplug the machine
from the power supply.
If your product is supplied with an
emergency drain hose, do the following
as shown in the figure below:
A There may be water at 90°C in the
machine. Therefore, the filter must
be cleaned only after the inside
water is cooled down to avoid
hazard of scalding.
2- Open the filter cap. The filter cap
may be composed of one or two pieces
according to the model of your machine.
If it is composed of two pieces, press
the tab on the filter cap downwards and
pull the piece out towards yourself.
•
•
Pull out the pump outlet hose from
its housing.
Place a large container at the end
of the hose. Drain the water off into
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
the container by pulling out the plug
at the end of the hose. If the amount
of water to be drained off is greater
than the volume of the container,
replace the plug, pour the water out,
then resume the draining process.
After draining process is completed,
replace the plug into the end of the
hose and fit the hose back into its
place.
into their positions and pushing the
upper part of it.
•
If your product is not supplied with an
emergency drain hose, do the following
as shown in the figure below:
•
•
Place a large container in front of the
filter to receive water flowing from the
filter.
Loosen pump filter (anticlockwise)
until water starts to flow out of it.
Direct the flowing water into the
container you have placed in front of
the filter. You can use a piece of cloth
to absorb any spilled water.
•
•
•
When there is no water left, turn the
pump filter until it is completely loose
and remove it.
Clean any residues inside the filter
as well as fibers, if any, around the
propeller region.
If your product has a water jet
feature, be sure to fit the filter into
its housing in the pump. Never force
the filter while replacing it into its
housing. Fit the filter fully into its
housing; otherwise, water may leak
from the filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
25
8 Solution suggestions for problems
Cause
Explanation / Suggestion
Programme cannot be started or selected.
Machine may have switched to self
protection mode due to an infrastructure
problem (such as line voltage, water
pressure, etc.).
Bring your machine to factory settings by turning
the Programme selection knob. (see, Ending the
Programme through Cancelling)
Water in the machine.
There may be some water in your machine
when you receive it. This is from the
quality control process and is normal.
It is not harmful to your machine.
There is water coming from the bottom of the machine.
- Make sure that the seals of the water inlet
hoses are securely fitted.
There might be problems with hoses or
the pump filter.
- Tightly attach the drain hose to the tap.
- Make sure that the pump filter is completely
closed.
Machine does not fill with water
- Tap may be turned off.
- Open the inlet water taps fully.
- Flatten the water intake hose.
- Clean the water intake filter.
- Close the loading door.
- Water inlet hose might be bent.
- Water inlet filter might be clogged.
- The loading door may be ajar.
Machine does not discharge water.
- Water outlet hose might be clogged or
twisted.
- Pump filter may be clogged.
- Clean or flatten the hose.
- Clean the pump filter.
Machine vibrates or shakes.
- Machine feet might not be adjusted.
- Transportation safety bolts might have
not been removed.
- Adjust the machine feet.
- Remove the transportation safety bolts.
- Add more laundry to the machine.
- Reduce the amount of laundry in the machine
or balance the load by hand.
- There may be a small amount of laundry
in the machine.
- The machine may be overloaded or the
clothes may be distributed unevenly.
- There machine might be touching a solid
surface.
- Ensure that nothing touches the machine.
Machine stops shortly after the Programme starts.
Machine can stop temporarily due to low It will resume operating when the voltage is back
voltage.
to the normal level.
The water being taken in is directly discharged.
Connect the water draining hose as described in
the operation manual.
Improper position of the drain hose.
No water can be seen in the machine during washing.
This is not a problem. The water level
is not visible from the outside of the
machine.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
The door is jammed.
- Water level might be above the lower
level of the door.
- Machine might be heating up the water - Run either the “Pump” or “Spin” Programme.
or it may be at the spinning cycle.
- Wait until the process is over.
- Due to an electrical mechanism, the door - Wait until the process is over.
can only be opened a few minutes after
the Programme has stopped.
Machine fills with water when a process is cancelled.
For safety reasons cold water is added to cool
the hot wash load
Inside of machine may be hot.
It continuously spins. Remaining time does not count down. (On models with display)
- The automatic spin correction system might
have been activated due to the unbalanced
distribution of the laundry in the drum.
- The laundry in the drum may be clustered
There may be an imbalance of laundry in
(bundled laundry in a bag). Laundry should be
the machine.
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Washing time takes longer than the time specified in the manual
- The machine will wait until there is sufficient
amount of water, which will lengthen the
washing time to avoid poor washing results due
to insufficient water.
- Washing time is extended to avoid poor
washing results when the supply voltage is low.
- Cycle time is extended to heat up the water
when the input water is cold. Also, washing
- Water pressure may be low.
time can be lengthened to avoid poor washing
- Supply voltage may be low.
results.
- Input temperature of water may be low.
- The automatic spin correction system might
- There may be an imbalance of laundry in
have been activated due to the unbalanced
the machine.
distribution of the laundry in the drum.
- Number of rinses and/or amount of rinse
- The laundry in the drum may be clustered
water might have increased.
(bundled laundry in a bag).
- Laundry should be rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Water amount is increased to obtain a
better rinse and a rinse cycle is added when
necessary.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
27
It continuously washes. Remaining time does not count down.
- The machine will wait until there is sufficient
amount of water to avoid poor washing results
due to lack of water. Then the timer will start to
count down.
In the case of a paused countdown while
taking in water:
- Timer will not countdown until the
machine is filled with the correct amount
of water. (On models with display)
- Time might have gotten stuck during
heating step. (On models with display)
- Time will not count down until the selected
temperature for the Programme is attained.
- The automatic spin correction system might
have been activated due to the unbalanced
distribution of the laundry in the drum.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
In the case of a paused countdown at the
spinning step:
There may be an imbalance of laundry in
the machine. (On models with display)
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
It did not spin.
- The automatic spin correction system might
have been activated due to the unbalanced
distribution of the laundry in the drum.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- There may be an imbalance of laundry in
the machine. Therefore, the Programme
might have been completed without
spinning.
- The machine will not spin if the water has
not completely drained.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- Check the filter.
- Check the drain hose.
Washing performance is poor: Laundry turns grey
- Using insufficient amount of detergent
- Use the recommended amount of detergent
appropriate for water hardness and the laundry.
for a long time,
- Washing at low temperatures for a long - Select the proper temperature for the laundry
time,
to be washed.
- Using insufficient amount of detergent
for hard waters (soil can stick to the
laundry),
- If the water hardness is high, using an
insufficient amount of detergent can cause
laundry to turn grey over time.
- It is difficult to eliminate such greyness once it
occurs.
- Using excessive amount of detergent
(detergent can stick to the laundry).
Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not
be whitened.
- Insufficient amount of detergent used.
- Excessive laundry loaded into machine
- Wrong Programme and temperature
might have been selected.
- Use recommended amount of detergent
appropriate for the laundry.
- Do not load the machine in excess.
- Select the proper Programme and temperature
for the laundry to be washed.
- Improper detergent may have been
used.
- Put the detergent in the correct compartment.
- Do not mix detergent with bleaching agents.
- Wrong type of detergent used.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
- Washing performance is poor: Oily stains appear on laundry.
- Washing performance is poor: Bad odour
- Such odours and bacteria layers are
formed on the drum as a result of continuous
washing at lower temperatures and/or in short
Programmes.
- Oily accumulations on the drum may
have stuck to the laundry.
- Oily accumulations on the drum may
have stuck to the laundry.
- Leave the detergent dispenser drawer as well
as the loading door of the machine ajar after
each washing. Thus, a humid environment
favorable for bacteria cannot be created inside
the machine.
- Machine must be operated empty either at
60°C or 90°C Programme with detergent every
6 months.
Colour of the clothes faded.
- Do not load the machine in excess
- Excessive laundry loaded into machine. - Store detergent in a closed and dry location.
- Detergent may have gotten damp.
- A higher temperature might have been
selected.
- Do not keep them under high temperatures.
- Select the proper Programme and temperature
according to the type and soiling degree of the
laundry.
It does not rinse well.
- Store detergent in a closed and dry location.
Do not keep them under high temperatures.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
- The amount, brand and storage
conditions of the detergent used might not step.
be appropriate.
- Check the filter.
- Check the drain hose.
- Detergent might have been put in the
wrong compartment.
- There may be an imbalance of laundry in the
machine.
- Machine filter may be clogged.
- Drain hose may be folded.
- Intermediate spins may be skipped.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
Clothes stiffened.
- If the water hardness is higher, using
insufficient amount of detergent can cause the
laundry to become stiff in time. Use appropriate
amount of detergent according to the water
hardness.
- Insufficient amount of detergent used.
- The detergent may have been placed
into the wrong compartment; the
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
detergent may be mixed with the softener. can take this detergent during rinsing or softener
step.
- Do not mix the softener with detergent when
putting in the compartment.
- Wash and clean the drawer with hot water.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Clothes do not smell like the softener.
- Insufficient amount of detergent used.
- If the water hardness is higher, using
insufficient amount of detergent can cause the
laundry to become stiff in time. Use appropriate
amount of detergent according to the water
hardness.
- The detergent was placed into the wrong - If detergent is put in the prewash compartment
compartment; the detergent was mixed
with the softener.
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
Do not mix the softener with detergent when
putting in the compartment.
Wash and clean the drawer with hot water.
Detergent residue in the dispensing drawer.
- Dry the detergent drawer before putting in
detergent.
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- The detergent dispenser outlet (holes) may
have a problem.
- There might be problems with the detergent
dispenser valves.
- Do not mix the softener with detergent when
putting in the compartment.
- Detergent may have been put in wet
dispenser drawer.
- Detergent may have gotten damp.
- Water pressure might be low
- The detergent in the main wash
compartment might have gotten wet while
taking in the prewash water..
- Detergent might be mixed with the
bleaching agent.
There is detergent left on the laundry.
- Excessive laundry loaded into machine. - Do not load the machine in excess.
- Wrong Programme and temperature
might have been selected.
- Wrong detergent may have been used.
- Select the proper Programme and temperature
for the laundry to be washed.
- Use wool detergents for woollens.
There is too much foam
- Use only automatic washing machine
detergents in your washing machine.
- Use only sufficient amount of detergent.
- Use only sufficient amount of detergent.
.
- You may not be using proper detergent
for automatic washing machines.
- Excessive amount of detergent may have - Store detergent in a closed and dry location.
been used.
- Do not store in excessively hot places.
- Too much detergent may have been used - Use smaller amounts of detergent for lace
for a small amount of lightly soiled laundry. items.
- Detergent may have been stored
improperly.
- If you put detergent in the prewash
compartment although you have not selected
- Type of material being washed (lace items a prewash cycle, the machine can take this
will cause excessive foam due to their
meshed structure).
detergent during rinsing or softener step.
- Too much softener was put in.
- Detergent might have been put in the
wrong compartment.
The detergent dispenser is problematic. Water
is siphoned (pulling the softener into the washer
early) during the fill or rinse cycles.
Valves are problematic.
- Softener being released early.
There is foaming over the detergent drawer
Mix 1 tablespoonful softener and ½ liter water
and pour into the main wash compartment of
the detergent drawer.
Too much detergent was used
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
The plug might not be
plugged in the mains outlet.
Plug should be checked.
Fuse may have blown.
Fuse should be checked.
Machine does work. No
light is on.
Electricity may be cut off.
Power should be checked.
The “On/Off” button might
have not been pressed.
This button must be pressed.
The machine did not
start after the program
was selected and the
‘Start/Pause/Cancel’
button was pressed.
The front door may be ajar.
You can restart your machine
by pressing the “Start/Pause/
“Washing” and “Start/
Pause/Cancel” lights
are flashing after the
program is started.
Water may have been cut off. Cancel” button for a short
time after ensuring that the
water is not cut off.
For your safety, the front
door can only be opened 2
The “Lid” light is
flashing.
It shows the safety period until
the door lock is opened.
minutes after the program is
completed. The “Lid” light will
flash during this period.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
31
|