Beko Washer D1 5062 B User Manual
D1 5061 B  
D1 5062 B  
D1 5081 B  
D1 5081 BS  
D1 5082 B  
D1 5101 B  
D1 5102 B  
D1 5102 BS  
Washing Machine  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Changing the program after the  
program has started  
Child-proof lock  
Ending the program through  
canceling  
1 Your Washing Machine  
4
19  
20  
Overview  
Specifications  
4
5
20  
20  
2 Warnings  
6
End of Program  
General Safety  
First Use  
Intended use  
Safety instructions  
If there are children in your house...  
6
6
6
7
7
6 Quick instructions for  
daily use  
21  
23  
7 Cleaning and care  
3 Installation  
8
Detergent drawer  
23  
23  
23  
23  
The loading door and the drum  
Body and control panel  
Inlet water filters  
Draining any remaining water and  
cleaning the pump filter  
Removing packaging reinforcement  
Opening the transportation locks  
Appropriate installation location  
Adjusting the feet  
Connecting to the water supply.  
Connecting to the drain  
Electrical connection  
Destroying the packaging material  
Disposing of the old machine  
8
8
8
8
9
24  
9
8 Troubleshooting  
26  
10  
10  
10  
4 Initial preparations for  
washing  
11  
Sorting the laundry  
11  
11  
11  
12  
12  
Preparing clothes for washing  
Correct load capacity  
Loading door  
Detergents and softeners  
5 Selecting a Program and  
Operating Your Machine  
14  
Control panel  
14  
15  
15  
16  
Turning the machine on  
Program selection  
Spin Speed selection  
Program selection and consumption  
table  
Auxiliary functions  
Starting the Program  
Progressing a program  
17  
18  
18  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Your Washing Machine  
Overview  
Figure 1  
1
2
3
Top Lid  
4 Height-adjustable Feet  
5
6
Detergent Drawer  
Control Panel  
Loading Door  
Filter Cap  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
Models  
Maximum dry laundry capacity (kg)  
Height (cm)  
5
5
5
5
5
5
5
5
84  
60  
55  
61  
84  
60  
55  
62  
84  
60  
55  
62  
84  
60  
55  
62  
84  
60  
55  
61  
84  
60  
55  
62  
84  
60  
55  
62  
84  
60  
55  
62  
Width (cm)  
Depth (cm)  
Net Weight (kg)  
Electricity (V/Hz.)  
Total Current (A)  
Total Power (W)  
Spinning cycle (rpm max.)  
220-240 V / 50hz  
10 10 10 10  
2100-2500  
600 800 800 1000 600 800 1000 1000  
10  
10  
10  
10  
Specifications of this appliance may change without notice to improve the quality of  
the product. Figures in this manual are schematic and may not match your product  
exactly.  
Values stated on the machine labels or in the documentation accompanying it are  
obtained in laboratory in accordance with the relevant standards. Depending on  
operational and environmental conditions of the appliance, values may vary.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
 
2 Warnings  
Please read the following information.  
Otherwise, there may be the risk of  
personal injury or material damage.  
Moreover, any warranty and reliability  
commitment will become void.  
for 3 seconds to cancel the program  
set in your machine before calling  
the authorized service.  
First Use  
•
To prepare your machine for  
General Safety  
washing, carry out your first washing  
process without loading your  
•
Never place your machine on a  
carpet covered floor. Otherwise,  
lack of airflow from below of your  
machine may cause electrical  
parts to overheat. This may cause  
problems with your washing  
machine and with detergent under  
“Cottons 90°C” program.  
•
Ensure that the cold and hot water  
connections are made correctly  
when installing your machine.  
Otherwise, your laundry may come  
out hot at the end of the washing  
process and may wear out.  
machine.  
•
•
If the power cable or mains plug is  
damaged you must call Authorized  
Service for repair.  
Check water hoses for wear. Do  
not use old/used water inlet hoses.  
These may cause stains on your  
laundry.  
•
•
If the current fuse or circuit breaker  
is less than 16 Amperes, please  
have a qualified electrician install a  
16 Ampere fuse or circuit breaker.  
While using with or without a  
•
Fit the drain hose into the discharge  
housing securely to prevent any  
water leakage and to allow machine  
to take in and discharge water as  
required. It is very important that the  
water intake and drain hoses are not  
folded, squeezed, or broken when  
the appliance is pushed into place  
after it is installed or cleaned.  
Your washing machine is designed  
to continue operating in the event  
of a power interruption. You cannot  
cancel any program by pressing  
the “On/Off button.” Your machine  
will not resume its program when  
the power restores. Press the  
“Start/Pause/Cancel” button for  
3 seconds to cancel the program  
(See, Canceling a Program)  
transformer, do not neglect to have  
the grounding installation laid by a  
qualified electrician. Our company  
shall not be liable for any damages  
that may arise when the machine is  
used on a line without grounding.  
To make your machine ready for  
use, please be sure that the tap  
water supply and water drainage  
systems are appropriate before  
calling the authorized service. If they  
are not, call a qualified plumber to  
have any necessary arrangements  
carried out.  
•
•
Intended use  
•
This product has been designed for  
home use.  
•
The appliance may only be used for  
washing and rinsing of textiles that  
are marked accordingly.  
•
•
There may be some water in your  
machine when you receive it. This is  
from the quality control process and  
is normal. It is not harmful to your  
machine.  
Some problems you may encounter  
may be caused by the infrastructure.  
Press "Start/Pause/Cancel" button  
•
•
Only detergents, softeners and  
supplements suitable for washing  
machines may be used.  
Observe the care instructions  
labeled on textile products and  
any other instructions given by  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
companies that produce detergents  
for your machine.  
If there are children in your  
house...  
•
Electrical appliances may be  
dangerous for the children. Keep  
children away from the machine  
when it is operating. Do not let them  
tamper with the machine.  
Safety instructions  
•
•
•
This appliance must be connected  
to an earthed outlet protected by a  
fuse of suitable capacity.  
The supply and draining hoses must  
always be securely fastened and  
remain in an undamaged state.  
Fit the draining hose to a washbasin  
or bathtub securely before starting  
up your machine. There may be a  
risk of being scalded due to high  
washing temperatures!  
•
•
Close the loading door when you  
leave the area where the machine is  
located.  
Store all detergents in a safe place  
out of reach of the children.  
•
•
Never open the loading door or  
remove the filter while there is still  
water in the drum. Otherwise, there  
may be the risk of flooding and  
possible injury due to the hot water.  
Never force to open the locked  
loading door! The loading door will  
be ready to open just a few minutes  
after the washing cycle comes to an  
end.  
•
•
Unplug the machine when it is not in  
use.  
Never wash down the appliance  
with a water hose! There is the risk  
of electric shock! Always disconnect  
from the mains by unplugging before  
cleaning.  
Never touch the plug with wet  
hands. Never unplug by pulling  
on the cable, always pull out from  
the plug only. Do not operate the  
machine if the power cord or plug is  
damaged.  
•
•
•
Never attempt to repair the machine  
yourself. Otherwise, you may be  
putting yours and other's lives in  
danger.  
For malfunctions that cannot  
be solved by information in the  
operating manual:  
Turn off the machine, unplug it, turn  
off the water tap and contact an  
authorized service agent.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
 
3 Installation  
3. Fit the covers (supplied in the bag  
with the Operation Manual) into the  
holes on the rear panel. (“P”)  
Removing packaging  
reinforcement  
Tilt the machine to remove the  
packaging reinforcement. Remove the  
packaging reinforcement by pulling the  
ribbon.  
C Keep the transportation safety  
bolts in a safe place to reuse when  
the washing machine needs to be  
moved again in the future.  
C Never move the appliance without  
the transportation safety bolts  
properly fixed in place!  
Opening the transportation  
Appropriate installation  
locks  
location  
C Transportation safety bolts must  
be removed before operating the  
washing machine! Otherwise, the  
machine will be damaged!  
Install the appliance in environments  
which have no risk of freezing, in a  
stable and level position.  
C The floor must be capable of  
carrying the load on it!  
1. Loosen all the bolts with a spanner  
until they rotate freely (“C”)  
C If the washing machine and a drier  
are placed on top of each other,  
their approximate weight together  
may reach 180 kg when they are  
full.  
Important:  
•
•
•
Do not place the appliance on top of  
the power cable.  
Keep at least 1cm distance from the  
edges of other furniture.  
Place the machine on a firm surface;  
do not position it on a long pile rug  
or suchlike surfaces.  
2. Remove transportation safety bolts  
by turning them gently.  
Adjusting the feet  
C Do not use any tools to loosen the  
lock nuts. Otherwise, they can be  
damaged.  
1. Manually (by hand) loosen the lock  
nuts on the feet.  
2. Adjust them until the machine  
stands level and firmly.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Important: Tighten all lock nuts up  
again.  
to the tap and the elbowed end  
must be attached to the machine.  
Tighten the nuts of the hose well by  
hand; never use wrenches to tighten  
the nuts.  
Connecting to the water  
supply.  
Important:  
•
The water supply pressure required  
to run the machine must be 1-10  
bar (0,1 – 10 MPa). (Practically, it  
is necessary to have 10 – 80 liters  
of water flowing from the tap in  
one minute to have your machine  
run smoothly.) Attach a pressure-  
reducing valve if the water pressure  
is higher.  
Connect the special hoses supplied  
with the machine to the water intake  
valves on the machine. The hose  
bearing the “red” sign (90°C max)  
is the hot water inlet and the hose  
bearing the “blue” sign (25°C max) is  
for the cold water inlet.  
•
Open the taps completely after  
making the hose connection to  
check if there is any water leakage  
at the connection points. Turn off  
the tap and remove the nut in case  
of any leakage. Retighten the nut  
carefully after checking the seal.  
To prevent any water leakage and  
any other damage to be caused by  
it, keep the taps closed when the  
machine is not in use.  
Models with a single water inlet  
should not be connected to the  
hot water tap. Laundry may be  
damaged or the appliance may  
switch to protection mode and not  
work.  
•
•
When returning the appliance to its  
place after maintenance or cleaning,  
care should be taken not to fold,  
squeeze or block the hoses.  
Connecting to the drain  
The water discharge hose can be  
attached to the edge of a washbasin or  
bathtub. The drain hose should be firmly  
fitted into the drain as to not get out of  
its housing.  
•
In order to prevent water leakage  
that may occur at the connection  
points, there are rubber seals (4  
seals for the models with double  
water inlet and 2 seals for other  
models) attached to the hoses.  
These seals should be used at the  
tap and machine connection ends of  
the hoses. The plain end of the hose  
fitted with a filter must be attached  
Important:  
•
The end of the drain hose can  
be directly connected to the  
wastewater drain or to the  
washbasin. The fitting must  
alwasy be secured in all types of  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
connections. Your house may be  
flooded if the hose gets out of its  
housing during water discharging.  
The hose should be attached to a  
height of at least 40 cm, and 100  
cm at most.  
Electrical connection  
Connect the machine to an earthed  
outlet protected by a fuse of suitable  
capacity.  
•
•
Important:  
•
•
•
Connection should comply with  
national regulations.  
In case the hose is elevated  
after laying it on the floor level or  
close to the ground (less than  
40 cm above the ground), water  
discharge becomes more difficult  
and the laundry may come out wet.  
Therefore, the heights described in  
the figure should be followed.  
Power cord plug must be within  
easy reach after installation.  
The voltage and the allowed fuse  
protection are specified in the  
section “Technical Specifications”.  
The specified voltage must be equal  
to your mains voltage.  
•
•
Connection via extension cords or  
multi-plugs should not be made.  
B A damaged power cable must be  
replaced by a qualified electrician.  
B The appliance must not be operated  
unless it is repaired! There is the risk  
of electric shock!  
Destroying the packaging  
material  
Packaging material can be dangerous to  
children. Keep the packaging materials  
out of reach of children or dispose  
them by classifying according to  
waste directives. Do not dispose them  
together with normal domestic wastes.  
Packaging materials of your machine are  
manufactured from recyclable materials.  
•
To prevent dirty water refilling the  
machine, and to allow for easy  
discharge, the end of the hose  
must not be submerged in the drain  
water. The end of the hose must be  
able to take in air. The hose should  
be pushed into the drainage for  
more than 15 cm. If it is too long  
you may have it shortened.  
The end of the hose should not be  
bent, it should not be stepped on  
and it must not be folded between  
the drain and the machine.  
the length of the hose is too short,  
you may add an extension hose  
to the original section. The length  
of the hose must not be longer  
than 3.2 m after coming out of the  
machine. To avoid water leakage  
failures, the connection between the  
extension hose and the drain hose  
of the product must be fitted well  
with an appropriate clamp as not to  
come off and leak.  
Disposing of the old machine  
Dispose of your old appliance in an  
environmental friendly manner.  
•
•
•
You may refer to your local agent or  
solid waste collection center in your  
municipality to learn how to dispose  
of your machine.  
Before disposing of your old washing  
machine, cut off the mains plug and  
make the door lock unusable.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Initial preparations for washing  
Sorting the laundry  
•
Empty pockets and remove all  
foreign objects such as coins, pens  
and paper clips. If possible, turn  
pockets out and brush.  
•
Sort the laundry according to type  
of fabric, color, and degree of soiling  
and permissible water temperature.  
Always follow the advice on the  
garment labels.  
•
Place small items like infants’  
socks and nylon stockings, etc.  
in a laundry bag, pillow case or  
something similar. This will also save  
your laundry from getting lost.  
Place curtains in the machine with  
care. Remove curtain rails and  
pullers.  
Non machine-  
washable  
Washing water  
Wash with  
Do not wash  
•
temperature sensitive, short  
programs.  
•
•
Fasten zippers, sew loose buttons  
and mend rips and tears.  
Wash “machine washable” or “hand  
washable” labeled products only  
with an appropriate program.  
Do not wash colors and whites  
together. New, dark colored cottons  
may release a lot of dye. Wash them  
separately.  
Bleach can be Do not use  
Dry-cleanable  
Do not  
dry-clean  
used  
bleach  
•
Suitable for  
drier  
Do not dry  
with drier  
Dry  
horizontally  
Dry on a  
hanger  
•
•
Tough stains must be treated  
properly before washing. If you are  
not sure, check with a dry cleaner.  
Use only dyes/color changers and  
lime removers suitable for machine  
wash. Always follow the instructions  
on the packaging.  
Hang without Can be ironed  
Can be  
Do not iron  
spinning  
with hot iron ironed with  
warm iron  
•
•
Wash trousers and delicate clothes  
turned inside out.  
Preparing clothes for washing  
Laundry items with metal attachments  
such as, bras, belt buckles and metal  
buttons will damage the machine.  
Remove metal attachments or place the  
items in a clothing bag, pillow case, or  
something similar.  
Keep laundry items made of Angora  
wool in the freezer for a few hours  
before washing. This will reduce  
pilling.  
Correct load capacity  
•
The maximum load capacity  
depends on the type of laundry, the  
degree of soiling and the washing  
program you wish to use.  
C The machine adjusts the amount of  
water according to the amount of  
laundry placed inside.  
C Please follow the information in the  
"Program Selection Table". Washing  
results will degrade when the  
machine is overloaded.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Following weights are given as  
examples.  
Detergent, softener and other  
cleaning agents  
Add detergent and softener before  
starting the washing program.  
Never open the detergent dispenser  
drawer while the washing program is  
running!  
When using a program without pre-  
wash, no detergent should be put  
into the pre-wash compartment  
(Compartment no. I).  
A program without pre-wash should  
not be selected if a detergent bag or  
a dispensing ball is going to be used.  
You can place the detergent bag or  
the dispensing ball directly among the  
laundry in your machine.  
Laundry type  
Bathrobe  
Napkin  
Weight (gr.)  
1200  
100  
700  
500  
200  
250  
200  
200  
100  
600  
200  
500  
100  
Duvet cover  
Bed Sheet  
Pillowcase  
Tablecloth  
Towel  
Evening gown  
Underclothing  
Men’s coveralls  
Men’s shirt  
Men’s pajamas  
Blouse  
Choosing the detergent type  
The type of detergent to be used  
depends on the type and color of fabric.  
Loading door  
The door is locked during program  
operation. The door can be opened after  
some time following the program end.  
•
•
•
Use different detergents for colored  
and white clothes.  
Wash woolens with a special  
detergent specifically for woolens.  
Use only detergents manufactured  
specifically for washing machines.  
•
•
Open the loading door.  
Place laundry items loosely in the  
machine.  
•
Push the loading door until it clicks  
into place tightly. Ensure that no  
items are caught in the door.  
Detergent quantity  
The amount of washing detergent to  
be used depends on the amount of  
laundry, the degree of soiling and water  
hardness.  
Detergents and softeners  
Detergent drawer  
The detergent drawer is composed of  
three compartments:  
•
Do not use amounts exceeding  
the quantities recommended on  
the package to avoid problems  
of excessive foam, poor rinsing,  
financial savings and finally,  
environmental protection.  
The detergent dispenser may be in two  
different types according to the model of  
your machine.  
- (I) for prewash  
- (II) for main wash  
- (III) siphon  
•
•
Use small amounts of detergent at a  
suitable measure for small amounts  
of laundry or for only slightly soiled  
laundry.  
Use exact measures for highly  
concentrated detergents.  
– ( ) for softener  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
 
for washing machines and always  
follow the instructions on the  
package.  
Detergent  
quantity  
1/2 measure  
for prewashing  
for main  
washing  
1 measure  
an additional  
1/2 measure  
with hard water  
Softener  
Put the softener into the softener  
compartment of the detergent  
dispenser.  
•
Use the proportions recommended  
on the packet.  
•
Never exceed the (> max <) level  
marking; otherwise, the softener will  
be wasted without being used.  
If the softener has lost its fluidity,  
dilute dense softener with water  
before placing it in the detergent  
drawer.  
•
Liquid detergent  
When using liquid or gel washing  
detergents, please note the following:  
•
•
The liquid detergent may leave  
stains on your laundry if time delay  
feature is selected.  
Do not use liquid detergent if you  
want to wash using the time delay  
feature.  
•
•
Do not use liquid detergent for the  
main wash in a cycle with pre-wash.  
Use the detergent manufacturer's  
measuring cup and follow the  
instructions on the package.  
Starch  
•
Add liquid starch, powder starch  
or the dyestuff into the softener  
compartment as instructed on the  
package.  
•
•
Never use fabric softener and starch  
together in the same washing cycle.  
Wipe the inside of the drum after  
using starch.  
Eliminating lime formation  
•
When required, use only appropriate  
lime removers developed specifically  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
5 Selecting a Program and Operating Your Machine  
Control panel  
Figure 2  
10  
7
9
8
11  
13  
12  
7 - On/Off Button  
8 - Door Indicator  
9 - Program Follow-up Indicator  
10 - Child-proof Lock Indicator  
11 - Spin Speed Adjustment Knob  
12 - Program Selection Knob  
13 - Time Delay Key  
14 - Auxiliary Function Keys  
15 - Start/Pause/Cancel Button  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
 
choosing a program.  
Turning the machine on  
You can prepare the machine for  
program selection by pressing the  
the “On/Off” button. When the “On/  
Off” button is pressed, the “Lid” light  
illuminates indicating that the door is  
unlocked. Press the “On/Off” button  
again to shut down the machine.  
C Pressing the “On/Off” button does  
not necessarily mean that the  
program has started. Press "Start/  
Pause/Cancel" button to start the  
program.  
C Always select the lowest required  
temperature. Higher temperature  
means higher power consumption.  
C For further program details, see,  
“Program Selection Table”  
Main programs  
Depending on the type of textile, the  
following main programs are available:  
•Cottons  
You can wash your durable clothes with  
this program. Washes with vigorous  
washing movements in a longer  
washing cycle. It is recommended for  
your cotton items (such as bed sheets,  
duvet and pillowcase sets, bathrobes,  
underclothing, etc.).  
Program selection  
Select the appropriate program from the  
program table and the following washing  
temperature table according to type,  
amount and degree of soiling of the  
laundry. Select the desired program with  
the program selection button.  
•Synthetics  
You can wash your less durable clothes  
on this program. Washes with gentler  
washing movements and in shorter  
washing cycles. It is recommended for  
your synthetic clothes (such as shirts,  
blouses, synthetic/cotton blended  
garments, etc.). For curtains and lace,  
using the “Synthetic 40” program with  
pre-wash and anti-creasing functions  
selected is recommended. Detergent  
should not be put in the pre-wash  
compartment. Less detergent should be  
put in the main wash compartment as  
loose knit fabrics (lace) foam too much  
due to its meshed structure.  
C Each of these main programmes  
comprise of a complete washing  
process, including washing, rinsing  
and, if required, spin cycles.  
Normally soiled, white  
cottons and linens. (Ex.:  
coffee table covers,  
tablecloths, towels, bed  
sheets)  
90˚C  
60˚C  
Normally soiled, fade proof  
colored linens, cottons  
or synthetic clothes  
(Ex.: shirts, nightgowns,  
pajamas) and lightly soiled  
white linen clothes (Ex.:  
underwear)  
•Delicates  
You can wash your delicate clothes  
on this program. It has more sensitive  
washing movements and does not make  
intermediate spinning compared to the  
synthetic program. It must be used for  
clothes for which sensitive washing is  
recommended.  
For delicate clothes (Ex.:  
lace curtains), blended  
clothes including synthetics  
and woolens.  
40˚C-  
30°C-  
Cold  
•Woolens  
You can wash your machine-washable  
woolen garments on this program. Wash  
by selecting the proper temperature  
according to the labels of your clothes.  
It is recommended to use appropriate  
detergents for woolens.  
C Programs are limited with the  
highest spin speed appropriate for  
that particular type of cloth.  
C Sort the laundry according to type  
of fabric, color, degree of soiling and  
permissible water temperature when  
•Hand Wash  
You can wash your woolen/delicate  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
clothes that bear “not machine-  
washable” labels for which hand wash  
is recommended on this program. It  
washes the laundry with very tender  
washing movements without damaging  
your clothes.  
speed selection knob, the machine will  
spin in the maximum possible rpm in the  
default setting of the selected program.  
Additional programs  
For special cases, there are also extra  
programs available:  
C Additional programs may differ  
according to the features of your  
machine.  
• Super  
This program washes for a longer period  
at 40°C and gives the same result as the  
"Cottons 60°C" program, thus it saves  
energy. It is suitable for clothes for which  
you cannot use the "Cottons 60 °C"  
program.  
• Mini  
This program is used to quickly wash  
(30 minutes) a small amount of lightly  
soiled cotton garments.  
Special programs  
For specific applications, you can select  
any of the following programs:  
• Rinse  
This program is used when you want to  
rinse or starch separately.  
• Pump+spin  
This program spins with maximum  
possible rpm in the default setting after  
the water drains from the machine.  
C You should use a lower spin speed  
for delicate laundries.  
Spin Speed selection  
You can have your clothes spun at  
the maximum rpm selection on your  
machine by using the selection knob in  
models equipped with an rpm selection  
knob. In order to protect your clothes,  
your machine will not spin above 800  
rpm on synthetic programs and 600 rpm  
on woolens program. Furthermore, if  
you want to skip the spin cycle and take  
your clothes out, turn the rpm selection  
knob to “no spin” position.  
In machines not equipped with a spin  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Program selection and consumption table  
Programme  
Cottons  
Cottons  
Cottons  
Super  
90  
60**  
40  
40  
60  
40  
30  
40  
5
5
5
5
155 45 1.70  
140 45 0.95  
150 45 0.65  
180 45 0.65  
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Synthetics  
Synthetics  
Delicate  
Woollens  
2.5 120 55 0.90  
2.5 125 55 0.55  
•
•
•
•
•
•
•
•
•
•
2
85 60 0.40  
1.5 75 60 0.40  
55 50 0.21  
2.5 30 40 0.16  
Hand wash 30  
1
Mini  
30  
• : Selectable  
* : Automatically selected, not cancellable.  
**: Energy Label programme (EN 60456)  
Water and power consumption and programme duration may differ from the table  
shown, subject to changes in water pressure, water hardness and temperature,  
ambient temperature, type and amount of laundry, selection of auxiliary functions,  
and fluctuations in the supply voltage.  
C The auxiliary functions in the table may differ according to the model of your  
machine.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
the program by pressing “Start/Pause/  
Cancel” button for 3 sec.  
Auxiliary functions  
Auxiliary function selection keys  
•
In the machines equipped with spin  
speed selection knob or button, you  
can spin by selecting the desired  
spin speed and press "Start/Pause/  
Cancel" button.  
•
•
•
Desired auxiliary function depending  
on the program is selected.  
Some combinations cannot be  
selected together.  
Warning signal on the selected  
auxiliary function will light up.  
•
As for machines not equipped with  
a spin speed selection knob, you  
can end the program without a  
spin cycle by pressing the “Start/  
Pause/Cancel” button and draining  
the water. If you wish your clothes  
be spun, you can spin them by  
selecting “pump+spin” program.  
Auxiliary function buttons may differ  
according to the model of your machine.  
Auxiliary function selection  
If an auxiliary function that should not  
be selected together with a previously  
selected function is chosen, the first  
selected function will be cancelled and  
the last auxiliary function selection will  
remain active.  
Reducing Speed  
You may use the speed reduction button  
whenever you wish to spin your clothes  
below the maximum spin speed. When  
speed reduction button is pressed, spin  
speed will be at the minimum rpm given  
on the panel.  
Auxiliary function that is not compatible  
with the program cannot be selected.  
(see, “Program Selection Table”)  
No spin  
You may use this program if you do not  
want to spin your clothes at the end of  
cottons, synthetics, woolen or delicate  
programs.  
Pre-wash  
A pre-wash is only worthwhile for heavily  
soiled laundry. Without pre-wash you  
save energy, water, detergent and time.  
C Pre-wash without detergent is  
recommended for lace and curtains.  
Less detergent should be put in the  
main wash compartment as loose  
knit fabrics (lace) foam too much  
due to its meshed structure.  
No Heat  
If you wish to wash your clothes in cold  
water, you can use this program.  
Starting the Program  
1. Press "Start/Pause/Cancel" button  
to start the program.  
2. “Start/Pause/Cancel” button will  
light up to indicate that the program  
has started.  
3. The door is locked and the “Lid”  
light fades.  
Rinse Plus  
With this function, you can increase the  
number of current rinsing steps. Thus,  
sensitive skins’ risk of being affected by  
the remainder detergent on the clothes  
will be decreased.  
Rinse hold  
If you do not want to unload your  
clothes immediately after the cotton,  
synthetics, woolen and delicate fabrics  
program, you may release your clothes  
inside the machine in the last rinsing  
water by pressing the rinse hold button  
in order to prevent your clothes become  
wrinkled. After this process you may  
spin your laundry by pressing “Start/  
Pause/Cancel” button or you may end  
Progressing a program  
Progress of a running program is shown  
through the program follow-up indicator.  
•
At the beginning of every program  
step, the relevant indicator lamp will  
light up and light of the completed  
step will turn off. The symbol that is  
lit up at the far right of the series of  
symbols indicates the step that is  
being carried out.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
program.  
The “Wash” light on the program  
Select the “Cottons 40” program by  
rotating the program knob.  
Press "Start/Pause/Cancel" button to  
start the program.  
follow-up indicator illuminates when  
“Start/Pause/Cancel” button is pressed  
after selecting the washing program.  
The “Program finished” lamp illuminates  
and the “Wash” light will fade when the  
program comes to an end. The “Lid”  
light flashes. Meanwhile, the door will  
stay locked for your safety and when it  
is safe to open, the “Lid” and “Program  
Finished” lights remain on.  
C The program which is selected  
first will go on even if the program  
selection button is moved and  
another program mode is selected  
while the machine is operating.  
You must cancel the ongoing  
program in order to change the  
washing program. (See, Canceling a  
Program)  
You can put your machine into “Pause”  
mode by pressing the "Start/Pause/  
Cancel" button when it is operating.  
In this case, the “Start/Pause/Cancel”  
light will flash. Some changes in  
program settings can be made in pause  
mode (See. Changing a Program)  
and if “Pause” mode is entered at an  
appropriate step of the program, the  
adding laundry function may be used.  
(See, Adding and taking out laundry).  
Press "Start/Pause/Cancel" button  
again to return to the “Wash” mode  
from “Pause” mode. In this case the  
“Start/Pause/Cancel” button will light  
up continuously and the machine will  
resume operating from the step it was  
paused.  
Selecting or cancelling an auxiliary  
function/temperature/spin speed  
1. Press the “Start/Pause/Cancel”  
button to switch the machine to  
“Pause” mode.  
2. Change the auxiliary function’s  
temperature and spin speed.  
Press "Start/Pause/Cancel" button to  
start the program.  
C The selection to be made must be  
appropriate. For example, if your  
machine is on the main wash cycle,  
you may select additional rinse  
auxiliary function, but you cannot  
select pre-wash.  
C The spin speed and temperature  
which are selected first will keep on  
being valid even if the position of the  
spin speed or temperature selection  
knob is changed. Press the “Start/  
Pause/Cancel” button and switch  
the machine to “Pause” mode in  
order to change the spin speed or  
temperature. New spin speed or  
temperature can be selected.  
•If the machine is not spinning, the  
program may be in rinse hold mode  
or the automatic spin correction  
system has been activated because  
of unbalanced distribution of laundry  
in the machine.  
Changing the program after  
the program has started  
You can use this feature after your  
machine has started to wash different  
textile groups in the same batch  
of clothes under higher or lower  
temperatures.  
Adding/removing laundry in standby  
mode  
If you want to add more laundry into the  
machine after the washing cycle has  
started, put the machine into “Pause”  
mode by pressing the "Start/Pause/  
Cancel" button. The “Lid” lamp on the  
program follow-up indicator will light up  
For example;  
Press and hold the “Start/Pause/Cancel”  
button for 3 seconds to “Cancel” the  
program in order to select “Cottons  
40” program instead of “Cottons 60”  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
steadily after 1-2 minutes if the water  
level in the machine is suitable. Laundry  
may be added or taken out by opening  
the door. If the “Lid” lamp does not  
light up continuously at the end of this  
time, the water level in the machine  
is not suitable and laundry cannot be  
added. You can resume the program  
by pressing the “Start/Pause/Cancel”  
button again.  
•
•
If the program is cancelled in the  
middle of the process, “Wash”  
and “Program Finished” lights will  
light up. The machine can drain  
all the water or can take in water  
for 3 times at most to cool down  
the clothes and complete draining  
process.  
When the water discharging process  
is completed, the “Wash” light will  
go off, “Program Finished” light  
will light up and the “Lid” light will  
continuously flash until the door  
is unlocked. You can make a new  
program selection when the “Lid”  
light is illuminated continuously.  
Child-proof lock  
There is a childproof lock to prevent  
any program interruption because of  
pressing the keys while the program is  
on. In order to activate the childproof  
lock, press on the 1st and 2nd  
auxiliary function keys from the left  
simultaneously for 3 seconds after  
the washing program has started.  
1st auxiliary function light will flash  
continuously.  
End of Program  
The “Program Finished” lamp on the  
program follow-up indicator will light up  
when the program comes to an end.  
The lid is unlocked 2 minutes later, the  
“Program Finished” and “Lid” lamps will  
light up continuously. The machine is  
now ready for a second cycle.  
To start a new program after the  
program is over or to interfere the  
program, childproof lock should be  
deactivated. To deactivate the child-  
proof lock, press the same buttons for  
3 sec.  
If any key is pressed when the machine  
is at the end of the program or if  
the position of the selection knob is  
changed, the “Program Finished” light  
will go off and only the “Lid” lamp will  
remain as lit. Meanwhile, if the door is  
still locked, the “Lid” light will continue  
flashing until the door is opened.  
Press the “On/Off” button to shut down  
the machine.  
Ending the program through  
canceling  
The program which is selected first will  
keep on going even if the position of the  
program selection button is changed. A  
new program can be selected or started  
after “Program is cancelled” in order to  
change the washing program.  
To cancel any selected program;  
•
Press “Start/Pause/Cancel” button  
for 3 seconds. The machine starts  
to discharge the water. “Wash” and  
“Program Finished” lights will light  
up.  
•
•
"Start/Pause/Cancel" and “Wash”  
lights will go off after discharging  
process is over and the “Lid” light  
will start flashing.  
“Lid” lamp will light up continuously  
when the door is unlocked. You can  
select and start a new program.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 Quick instructions for daily use  
Preparation  
1. Turn the tap on completely. Check if C Machine allows adding more laundry  
the hoses are connected tightly.  
2. Place the laundry in the machine.  
3. Add detergent and softener.  
during a later step only if the water  
level is low enough to open the  
loading door or if the temperature in  
the machine is low enough.  
In order to add laundry after the start-up  
of the program:  
Starting  
1. Press the “On/Off” button.  
2. Select the programme and the  
temperature.  
1. Press Start/Pause/Cancel button.  
Wait until the door is allowed  
to open. “Lid” lamp will light up  
continuously when the door is  
allowed to open.  
3. If required (according to your  
machine’s model):  
–
–
–
select any auxiliary function,  
adjust the spin speed,  
set the time delay,  
2. Open the loading door and put in  
more laundry.  
4. Close the loading door.  
3. Close the loading door.  
5. Press Start/Pause/Cancel button.  
4. Press Start/Pause/Cancel button.  
Canceling a program  
Program is in rinse hold mode  
C After the machine fills with water in  
the final rinse step, clothes can be  
soaked in the machine as long as  
desired.  
When it reaches this position while the  
machine is running, the “Start/Pause/  
Cancel” light will flash.  
In the machines equipped with spin  
speed selection knob, you can spin by  
selecting the desired spin speed and  
press "Start/Pause/Cancel" button.  
As for machines not equipped with a  
spin speed selection knob, you can  
end the program without spinning by  
pressing the “Start/Pause/Cancel”  
button to drain the water. You may spin  
your clothes whenever you wish to by  
selecting the spin program.  
•
Press “Start/Pause/Cancel” button  
for 3 seconds. The machine starts  
to discharge the water. “Wash” and  
“Program Finished” lights will light  
up.  
"Start/Pause/Cancel" and “Wash”  
lights will go off after discharging  
process is over and the “Lid” light  
will start flashing.  
•
•
If the program is cancelled in the  
middle of the process, “Wash”  
and “Program Finished” lights will  
light up. The machine can drain  
all the water or can take in water  
for 3 times at most to cool down  
the clothes and complete draining  
process. When water discharging  
process is completed, “Wash” light  
will go off, “Program Finished” light  
will light up and the “Lid” light will  
continuously flash until the door  
is allowed to be opened. You can  
Re-spinning the laundry  
The control system for an unbalanced  
load can pause the spinning in cases  
make a new program selection when when the distribution of the laundry in  
the “Lid” light is lit continuously.  
the drum is not balanced.  
If you want to re-spin the clothes:  
1. Rearrange the previously placed  
clothes in machine.  
Adding more laundry  
You may add more laundry into the  
machine at the beginning of washing.  
2. Select Spin+Pump program.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
3. Set the spin speed if spin speed  
adjustment is available on your  
machine.  
4. Press “Start/Pause/Cancel” button.  
After the program is finished  
1. “Program finished” lamp will light  
up on the program follow-up  
indicator. The lid can be opened  
after 2 minutes when the “Program  
Finished” and “Lid” lamps light up  
continuously.  
2. Press the On/Off button to shut  
down the machine.  
3. Turn the water tap off.  
4. Eliminate any folding of the rubber  
seal on the loading door and check  
for impurities.  
5. Leave the loading door and  
detergent drawer open to dry.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
7 Cleaning and care  
Detergent drawer  
Remove any powder residue buildup in  
the drawer. To do this;  
1. Press the dotted point on the  
siphon in the softener compartment  
and pull towards you until the  
compartment is removed from the  
machine.  
Body and control panel  
When necessary:  
•
Wipe the exterior panels of your  
machine with soapy water or mild  
detergent. Dry it with a soft cloth.  
Use only a soft and damp cloth to  
clean the control panel.  
•
C If more than a normal amount of  
water and softener mixture starts to  
gather in the softener compartment,  
the siphon must be cleaned.  
2. Wash the dispenser drawer  
and the siphon with plenty of  
lukewarm water in a washbasin.  
Wear protective gloves or use an  
appropriate brush to avoid touching  
the residues in the drawer when  
cleaning.  
C Never use a sponge or scrubbing  
material. These will damage the  
painted and plastic parts.  
Inlet water filters  
There is a filter at the end of each  
water intake valve at the back side of  
the machine and also at the end of  
each water intake hose where they  
are connected to the tap. These filters  
prevent the foreign substances and dirt  
in the water to enter into the machine.  
Filters should be cleaned as they get  
dirty.  
3. Replace the drawer into its housing  
after cleaning. Check if the siphon  
is in its original location.  
•
•
Close the taps.  
The loading door and the  
Remove the nuts of the water intake  
hoses to clean the surfaces of the  
filters on the water intake valves with  
an appropriate brush.  
drum  
After each wash:  
•
Check if there are any foreign  
substances in the drum.  
Open the hole in the bellow with the  
aid of a toothpick if it is clogged.  
•
•
If the filters are very dirty, you can  
pull them out by means of pliers and  
clean them.  
Take out the filters on the flat  
ends of the water intake hoses  
together with the gaskets and clean  
thoroughly under streaming water.  
Replace the gaskets and filters  
carefully to their places and tighten  
the hose nuts by hand.  
•
C Foreign metal substances in your  
machine can cause rust stains. In  
such cases:  
•
Clean the drum with a stainless steel  
cleaning agent. Never use steel wool  
or wire wool.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
Draining any remaining water  
and cleaning the pump filter  
Filter system in your machine prevents  
solid items such as buttons, coins and  
fabric fibers clogging the pump propeller  
during discharging of the washing  
water. Thus, a good water discharger is  
achieved and the pump life is extended.  
If it is composed of one piece, hold it  
from both sides and open it by pulling  
out.  
3- An emergency drain hose is supplied  
with some of our models. Others are not  
supplied with this item.  
•
If your machine fails to drain the  
water, the pump filter may be  
clogged. You may have to clean  
it every 2 years or whenever it is  
plugged. Water must be drained off  
to clean the pump filter.  
If your product is supplied with an  
emergency drain hose, do the following  
as shown in the figure below:  
In addition, water may have to be  
drained off completely in the following  
cases:  
•
before transporting the machine  
(e.g. when moving house)  
•
when there is the danger of frost  
In order to clean the dirty filter and  
discharge the water;  
1- Unplug the machine to cut off the  
supply power.  
A There may be water at 90°C in the  
machine. Therefore, the filter must  
be cleaned only after the inside  
water is cooled down to avoid  
hazard of scalding.  
•
•
Pull out the pump outlet hose from  
its housing.  
Place a large container at the end of  
the hose. Drain the water off into the  
container by pulling out the plug at  
the end of the hose. If the amount  
of water to be drained off is greater  
than the volume of the container,  
replace the plug, pour the water out,  
then resume the draining process.  
After draining process is completed,  
replace the plug into the end of the  
2- Open the filter cap. The filter cap  
may be composed of one or two pieces  
according to the model of your machine.  
If it is composed of two pieces, press  
the tab on the filter cap downwards and  
pull the piece out towards yourself.  
•
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hose and fit the hose back into its  
place.  
If your product is not supplied with an  
emergency drain hose, do the following  
as shown in the figure below:  
•
•
Place a large container in front of the  
filter to receive water flowing from  
the filter.  
Loosen pump filter (anticlockwise)  
until water starts to flow out of it.  
Direct the flowing water into the  
container you have placed in front  
of the filter. You can use a piece of  
cloth to absorb any spilled water.  
When there is no water left, turn the  
pump filter until it is completely loose  
and remove it.  
Clean any residues inside the filter  
as well as fibers, if any, around the  
propeller region.  
If your product has a water jet  
feature, be sure to fit the filter into  
its housing in the pump. Never force  
the filter while replacing it into its  
housing. Fit the filter fully into its  
housing; otherwise, water may leak  
from the filter cap.  
•
•
•
4- Close the filter cap.  
Close the two-piece filter cap of your  
product by pushing the tab on it.  
Close the one-piece filter cap of your  
product by fitting the tabs on the bottom  
into their positions and pushing the  
upper part of it.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
8 Troubleshooting  
Problem  
Cause  
Machine may have  
switched to self  
protection mode due to  
an infrastructure problem  
(such as line voltage,  
water pressure, etc.).  
Explanation / Suggestion  
Program  
cannot be  
started or  
selected.  
Reset your machine by pressing “Start/Pause/  
Cancel” button for 3 seconds. (see, Canceling  
a Program)  
There may be some water  
in your machine when you  
Water in the  
machine.  
receive it. This is from the It is not harmful to your machine.  
quality control process  
and is normal.  
Be sure the seals of the water inlet hoses are  
There is water  
coming from  
the bottom of  
the machine.  
There might be problems securely fitted.  
with hoses or the pump  
filter.  
Tightly attach the drain hose to the tap.  
Make sure that the pump filter is completely  
closed.  
Tap may be turned off.  
Open the inlet water taps fully.  
Water inlet hose might be  
bent.  
Flatten the water intake hose.  
Machine does  
not fill with  
water.  
Water inlet filter might be  
clogged.  
Clean the water intake filter.  
Close the loading door.  
Clean or flatten the hose.  
Clean the pump filter.  
The loading door may be  
ajar.  
Water outlet hose might  
be clogged or twisted.  
Machine does  
not discharge  
water.  
Pump filter may be  
clogged.  
Machine feet might have  
not adjusted.  
Adjust the machine feet.  
Transportation safety  
bolts might have not been Remove the transportation safety bolts.  
removed.  
There may be a small  
Machine  
vibrates or  
shakes.  
amount of laundry in the  
machine.  
Add more laundry to the machine.  
The machine may be  
overloaded or the clothes Reduce the amount of laundry in the machine  
may be distributed  
unevenly.  
or balance the load by hand.  
There machine might be  
touching a solid surface  
Ensure that nothing touches the machine.  
Machine  
stopped  
Machine can stop  
temporarily due to low  
voltage.  
It will resume operating when the voltage is  
back to the normal level.  
shortly after  
the program  
started.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The water  
being taken  
in is directly  
discharged.  
Improper position of the  
drain hose.  
Connect the water draining hose as described  
in the operation manual.  
No water can  
be seen in  
the machine  
during  
This is not a problem. The  
water level is not visible  
from the outside of the  
machine.  
washing.  
Water level might be  
above the lower level of  
the door.  
Run either the “Pump” or “Spin” program.  
Machine might be heating  
up the water or it may be Wait until the process is over.  
at the spinning cycle.  
The door is  
jammed.  
Due to an electrical  
mechanism, the door can  
only be opened a few  
minutes after the program  
has stopped.  
Wait until the process is over.  
Machine fills  
with water  
when a  
process is  
cancelled.  
Inside of machine may be For safety reasons, water should be cycled in  
hot.  
and out a couple times.  
The machine will wait until there is a sufficient  
amount of water, which may lengthen the  
washing time to avoid poor washing results  
due to insufficient water.  
Water pressure may be  
low.  
Washing time is lengthened to avoid poor  
washing results when the supply voltage is  
low.  
Supply voltage may be  
low.  
Cycle time lengthens to heat up the water  
when the input water is cold. Also, washing  
time can be lengthened to avoid poor washing  
results.  
Input temperature of  
water may be low.  
Washing time  
takes longer  
than the time  
specified in the  
manual  
The automatic spin correction system might  
have been activated due to the unbalanced  
distribution of the laundry in the drum.  
The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent  
any damage to the machine and to its  
environment.  
There may be an  
imbalance of laundry in  
the machine.  
Number of rinses and/or  
amount of rinse water  
might have increased.  
Water amount is increased to obtain a  
better rinse and a rinse cycle is added when  
necessary.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
In the case of a paused  
countdown while taking in  
water:  
Timer will not countdown  
until the machine is filled  
with the correct amount  
of water.  
The machine will wait until there is a sufficient  
amount of water to avoid poor washing results  
due to lack of water. Then the timer will start  
to count down.  
In the case of a paused  
countdown at the heating  
step:  
Time will not count  
down until the selected  
temperature for the  
program is reached  
It continuously  
washes.  
Remaining  
time does not  
count down.  
The automatic spin correction system might  
have been activated due to the unbalanced  
distribution of the laundry in the drum.  
The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent  
any damage to the machine and to its  
environment.  
In the case of a paused  
countdown at the  
spinning step:  
There may be an  
imbalance of laundry in  
the machine.  
The automatic spin correction system might  
have been activated due to the unbalanced  
distribution of the laundry in the drum.  
The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent  
any damage to the machine and to its  
environment.  
It continuously  
spins.  
There may be an  
Remaining  
imbalance of laundry in  
time does not the machine.  
count down.  
The automatic spin correction system might  
have been activated due to the unbalanced  
distribution of the laundry in the drum.  
The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent  
any damage to the machine and to its  
environment.  
There may be an  
imbalance of laundry in  
the machine. Therefore,  
the program might have  
been completed without  
spinning.  
It did not spin.  
The machine will not  
spin if the water has not  
completely drained.  
- Check the filter.  
- Check the drain hose.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Using insufficient  
amount of detergent for a  
long time,  
- Use the recommended amount of detergent  
appropriate for water hardness and the  
laundry.  
- Washing at low  
Washing  
temperatures for a long  
- Select the proper temperature for the  
laundry to be washed.  
performance is time,  
poor:  
- Using insufficient  
- If the water hardness is high, using an  
insufficient amount of detergent can cause  
laundry to turn gray over time.  
- It is difficult to eliminate such grayness once  
it occurs.  
Laundry turns amount of detergent for  
gray  
hard waters (soil can stick  
to the laundry),  
- Using excessive amount  
of detergent (detergent  
can stick to the laundry).  
Insufficient amount of  
detergent used.  
Use recommended amount of detergent  
appropriate for the laundry.  
Washing  
Excessive laundry loaded  
into machine  
performance is  
poor:  
Do not load the machine in excess.  
Stain could not Wrong program and  
Select the proper program and temperature  
for the laundry to be washed.  
be removed,  
not cleaned.  
Laundry  
could not be  
whitened.  
temperature might have  
been selected.  
Improper detergent may  
have been used.  
Wrong type of detergent  
used.  
Put the detergent in the correct compartment.  
Do not mix detergent with bleaching agents.  
Such odors and bacteria layers may be  
formed on the drum as a result of continuous  
washing at lower temperatures and/or in short  
programs. Leave the detergent dispenser  
Washing  
performance is  
poor:  
Oily accumulations on the drawer as well as the loading door of the  
drum may have stuck to  
the laundry.  
machine ajar after each washing. Thus, a  
humid environment favorable for bacteria  
cannot be created inside the machine.  
Machine must be operated empty either at  
60°C or 90°C program with detergent every 6  
months.  
Oily stains  
appear on  
laundry.  
Washing  
Oily accumulations on the Machine must be operated empty either at  
performance is  
poor:  
drum may have stuck to  
the laundry.  
60°C or 90°C program with detergent every 6  
months.  
Bad odor  
Excessive laundry might  
have been loaded in.  
Do not overload the machine.  
Detergent may have  
gotten damp.  
Store detergent in a closed and dry place. Do  
not keep them under high temperatures.  
Color of the  
clothes faded.  
Select the proper program and temperature  
according to the type and soiling degree of the  
laundry.  
A higher temperature  
might have been selected.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
The amount, brand and  
storage conditions of the Store detergent in a closed and dry place. Do  
detergent used might not not keep them under high temperatures.  
be appropriate.  
If detergent is put in the prewash  
Detergent might have  
compartment although prewash cycle is not  
been put in the wrong  
selected, the machine can take this detergent  
compartment.  
during rinsing or softener step.  
Machine filter may be  
Check the filter.  
clogged.  
It does not  
rinse well.  
Drain hose may be folded. Check the drain hose.  
There may be an imbalance of laundry in the  
machine.  
The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
Intermediate spins may be  
skipped.  
rearranged and re-spun.  
No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent  
any damage to the machine and to its  
environment.  
If the water hardness is higher, using  
insufficient amount of detergent can cause  
Insufficient amount of  
the laundry to become stiff in time. Use  
detergent used.  
appropriate amount of detergent according to  
the water hardness.  
Clothes  
stiffened.  
If detergent is put in the prewash  
The detergent may have  
been placed into the  
compartment although prewash cycle is not  
selected, the machine can take this detergent  
wrong compartment; the during rinsing or softener step.  
detergent may be mixed  
with the softener.  
Softener should not come into contact with  
detergent when being added.  
Wash and clean the drawer with hot water.  
If the water hardness is higher, using  
insufficient amount of detergent can cause  
the laundry to become stiff in time. Use  
appropriate amount of detergent according to  
the water hardness.  
Insufficient amount of  
detergent used.  
Clothes do not  
smell like the  
softener.  
If detergent is put in the prewash  
The detergent may have  
been placed into the  
compartment although prewash cycle is not  
selected, the machine can take this detergent  
wrong compartment; the during rinsing or softener step.  
detergent may be mixed  
with the softener.  
Softener should not come into contact with  
detergent when being added.  
Wash and clean the drawer with hot water.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent may have been  
put in wet dispenser  
drawer.  
Dry the detergent drawer before putting in  
detergent.  
Detergent may have  
gotten damp.  
Store detergent in a closed and dry place. Do  
not keep them under high temperatures.  
Detergent  
residue in the  
dispensing  
drawer.  
Water pressure might be  
low  
The detergent in the main  
wash compartment might  
have gotten wet while  
taking in the prewash  
water..  
The detergent dispenser outlet (holes) may  
have a problem.  
There might be problems with the detergent  
dispenser valves.  
Detergent might be mixed Softener should not come into contact with  
with the bleaching agent. detergent when being added.  
Excessive laundry might  
Do not load the machine in excess.  
have been loaded in.  
There is  
Wrong program and  
Select the proper program and temperature  
for the laundry to be washed.  
detergent left temperature might have  
on the laundry. been selected.  
Wrong detergent may  
have been used.  
Use wool detergents for woolens.  
You may not be using  
proper detergent for  
automatic washing  
machines.  
Use only automatic washing machine  
detergents in your washing machine.  
Excessive amount of  
detergent may have been Use only sufficient amount of detergent.  
The plug might not be  
Plug should be checked.  
used.  
plugged in the mains outlet.  
Machine does Too much detergent may  
Fuse may have blown.  
Fuse should be checked.  
Use only sufficient amount of detergent.  
Power should be checked.  
work. No light have been used for a  
Electricity may be cut off.  
small amount of lightly  
is on.  
soiled laundry.  
The “On/Off” button might  
This button must be pressed.  
have not been pressed.  
Detergent may have been Store detergent in a closed and dry location.  
stored improperly.  
Do not store in excessively hot places.  
The machine  
did not start  
There is too  
Type of material being  
washed (lace items will  
after the  
much foam.  
Use smaller amounts of detergent for lace  
program was  
selected and  
the 'Start/  
cause excessive foam due items.  
The front door may be ajar.  
to their meshed structure).  
If you put detergent in the prewash  
Pause/Cancel'  
button was  
pressed.  
Detergent might have  
been put in the wrong  
compartment.  
compartment although you have not selected  
a prewash cycle, the machine can take this  
detergent during rinsing or softener step.  
“Washing”  
and "Start/  
Pause/Cancel"  
lights are  
flashing after  
the program is  
started.  
You can restart your machine by pressing  
You may have added too much softener.  
Water may have been cut  
the "Start/Pause/Cancel" button for a short  
The detergent dispenser might be  
off.  
time after ensuring that the water is not cut  
problematic. Water may be siphoned (pulling  
Softener being released  
off.  
early.  
the softener into the washer early) during the  
fill or rinse cycles.  
There might be problems with the valves.  
For your safety, the front door can only  
be opened 2 minutes after the program is  
completed. The “Lid” light will flash during  
this period.  
It shows the safety period  
until the door lock is  
opened.  
The “Lid” light is  
flashing.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Computer Drive F5U210 User Manual
Belkin TV Mount RK5001ek User Manual
Bosch Power Tools Cordless Drill 17614 User Manual
Braun Meat Grinder G 1500 User Manual
Breville Toaster BTA425 User Manual
Briggs Stratton Lawn Mower NSPV22675HW User Manual
Broadband Products Network Router Networked Boat User Manual
Bush Hog Lawn Mower Subcompact Box Blades User Manual
Casio Calculator FX 10 User Manual
Channel Vision Intercom System DP XXXX User Manual