Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 General
4
5
2 Safety Precaution
1.1 Before connecting the model to the electricity
network:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Warning! . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Your Hood
6
2.1 Technical Specifications . . . . . . . . . . . . . . . . . 6
3 Installation Instructions
7
3.1 Electric Connection: . . . . . . . . . . . . . . . . . . . . 7
3.2 Fixing to the wall . . . . . . . . . . . . . . . . . . . . . . 7
3.3 Fixing the decorative telescopic flue . . . . . . . . 8
3.4 Filtering version . . . . . . . . . . . . . . . . . . . . . . . 8
4 Use and Maintenance
9
4.1 Replacing LED lamps (Fig.7):. . . . . . . . . . . . . . 9
4.2 Replacing halogen light bulbs (Fig.8): . . . . . . . 10
Hood / User ManuDalownload from Www.Somanuals.com. All Manuals Search And Download.
3 / 11 EN
1 General
Carefully read the following important information
regarding installation safety and maintenance. Keep
this information booklet accessible for further con-
sultations. The appliance has been designed for use
in the ducting version (air exhaust to the outside –
Fig.1B), filtering version (air circulation on the inside
– Fig.1A) or with external motor (Fig.1C).
B
C
A
Fig.1
Download from Www.Somanuals.com. All Manuals Search And DownloaHd.ood / User Manual
4 / 11 EN
2 Safety Precaution
Take care when the cooker hood is operating si- • Young children should be supervised to ensure
multaneously with an open fireplace or burner that
depend on the air in the environment and are sup-
plied by other than electrical energy, as the cooker
hood removes the air from the environment which a
burner or fireplace need for combustion. The nega-
tive pressure in the environment must not exceed
4Pa (4x10-5 bar).
they do not play with the appliance
• There shall be adequate ventilation of the room
when the rangehood is used at the same time as
appliances burning gas or other fuels.
• There is a risk of fire if cleaning is not carried out
in ac cordance with the instructions.
Provide adequate ventilation in the environment for
a safe operation of the cooker hood.Follow the local
laws applicable for external air evacuation.
This appliance conforms to the European Directive
EC/2002/96, Waste Electrical and Electronic
Equipment (WEEE). By making sure that this appli-
ance is disposed of in a suitable manner, the user is
helping to prevent potential damage to the environ-
ment or to public health.
1.1 Before connecting the model to the
electricity network:
- Control the data plate (positioned inside the appli-
ance) to ascertain that the voltage and power cor-
respond to the network and the socket is suitable. If
in doubt ask a qualified electrician.
The symbol on the product or on the accompanying
paperwork indicates that the appliance should not
be treated as domestic waste, but should be deliv-
ered to a suitable electric and electronic appliance
recycling collection point. Follow local guidelines
when disposing of waste.
- If the power supply cable is damaged, it must be
replaced with another cable or a special assembly,
which may be obtained direct from the manufac-
turer or from the Technical Assistance Centre.
- This device must be connected to the mains sup-
ply through either a plug fused 3A or hardwired to a
2 phase spur protected by 3A fuse.
For more information on the treatment, re-use and
recycling of this product, please contact your local
authority, domestic waste collection service or the
shop where the appliance was purchased.
1.2 Warning!
In certain circumstances electrical appliances may
be a danger hazard.
• Do not check the status of the filters while the
cooker hood is operating.
• Do not touch bulbs or adjacent areas, during or
straight after prolonged use of the lighting instal-
lation.
• Flambè cooking is prohibited underneath the
cooker hood.
• Avoid free flame, as it is damaging for the filters
and a fire hazard.
• Constantly check food frying to avoid that the
overheated oil may become a fire hazard.
• Disconnect the electrical plug prior to any main-
tenance.
• This appliance is not intended for use by young
children or infirm persons without supervision.
Hood / User ManuDalownload from Www.Somanuals.com. All Manuals Search And Download.
5 / 11 EN
3 Your Hood
2.1 Technical Specifications
CWB 9403 X
CWB 6403 X
600 mm
Width
Depth
900 mm
485 mm
485 mm
Height
Min 602 mm Max 1039 mm
Supply voltage
Control
220 - 240 V, 50 Hz
3 positions
3
Suction power
Motor power
Lamp power
Net weight
Gross weight
Color
861 m /h
250 W
2X20 W
12,2 kg
14,5 kg
10 kg
12,5 kg
Inox
Markings on the product or the values stated in other documents supplied with the product are values obtained under laboratory
conditions as per relevant standards. These values may vary according to the usage of the product and ambient conditions.
Download from Www.Somanuals.com. All Manuals Search And DownloaHd.ood / User Manual
6 / 11 EN
3 Installation Instructions
• Assembly and electrical connections must be
carried out by specialised personnel.
- In the case of assembly of the appliance in the
suction version prepare the hole for evacuation of
the air.
• We recommend the use of an air exhaust tube
which has the same diameter as the air exhaust
outlet hole. If a pipe with a smaller diameter is
used, the efficiency of the product may be redu-
ced and its operation may become noisier.
• Wear protective gloves before proceeding with
the installation.
3.1 Electric Connection:
- The appliance has been manufactured as a class
II, therefore no earth cable is necessary. The plug
must be easily accessible after the installation of the
appliance. If the appliance is equipped with power
cord without plug, a suitably dimensioned omnipolar
switch with 3 mm minimum opening between con-
tacts must be fitted between the appliance and the
electricity supply in compliance with the load and
current regulations.
- The connection to the mains is carried out as fol-
lows:
BROWN = L line
BLUE = N neutral.
3.2 Fixing to the wall
Drill the holes A respecting the distances indicated
(Fig.2). Fix the appliance to the wall and align it in
horizontal position to the wall units. When the appli-
ance has been adjusted, definitely fix the hood using
the screws A (Fig.4). For the various installations
use screws and screw anchors suited to the type of
wall (e.g. reinforced concrete, plasterboard, etc.). If
the screws and screw anchors are provided with the
product, check that they are suitable for the type of
wall on which the hood is to be fixed.
• The minimum distance between the support sur-
faces of the cooking pots on the cooker top and
the lowest part of the cooker hood must be at
least 65 cm. If a connection tube composed of
two parts is used, the upper part must be placed
outside the lower part. Do not connect the cooker
hood exhaust to the same conductor used to cir-
culate hot air or for evacuating fumes from other
appliances generated by other than an electrical
source. Before proceeding with the assembly
operations, remove the anti-grease filter(s) (Fig.5)
so that the unit is easier to handle.
Fig.2
Fig.5
Fig.4
Hood / User ManuDalownload from Www.Somanuals.com. All Manuals Search And Download.
7 / 11 EN
3 Installation Instructions
3.3 Fixing the decorative telescopic 3.4 Filtering version
flue
Install the hood and the two flues as described in
the paragraph for installation of the hood in ducting
version. To assemble the filtering flue refer to the
instructions contained in the kit. If the kit is not pro-
vided, order it from your dealer as accessory. The
filters must be applied to the suction unit positioned
inside the hood. They must be centred by turning
them 90 degrees until the stop catch is tripped
(Fig.6).
Arrange the electrical power supply within the di-
mensions of the decorative flue. If your appliance
is to be installed in the ducting version or in the
version with external motor, prepare the air exhaust
opening. Adjust the width of the support bracket of
the upper flue (Fig.3). Then fix it to the ceiling using
the screws A (Fig.3) in such a way that it is in line
with your hood and respecting the distance from the
ceiling indicated in Fig.2. Connect the flange C to
the air exhaust hole using a connection pipe (Fig.4).
Insert the upper flue into the lower flue. Fix the lower
flue to the hood using the screws B provided (Fig.4),
extract the upper flue up to the bracket and fix it
with the screws B (Fig.3). To transform the hood
from a ducting version into a filtering version, ask
your dealer for the charcoal filters and follow the
installation instructions.
Fig.6
Download from Www.Somanuals.com. All Manuals Search And DownloaHd.ood / User Manual
8 / 11 EN
4 Use and Maintenance
• We recommend that the cooker hood is switched • Before remounting the anti-grease filters and the
on before any food is cooked. We also recom-
mend that the appliance is left running for 15
minutes after the food is cooked, in order to thor-
oughly eliminate all contaminated air. The effec-
tive performance of the cooker hood depends on
constant maintenance; the anti-grease filter and
the active carbon filter both require special at-
tention.
regenerable active charcoal filters it is important
that they are completely dry.
• Clean the hood frequently, both internally and ex-
ternally, using a cloth dampened with denatured
alcohol or neutral liquid detergents that are non
abrasive.
• The lighting .system is designed for use during
cooking and not for the prolonged general light-
ing of the room. The prolonged use of the lighting
system significantly decreases the average dura-
tion of the bulbs.
• The anti-grease filter is responsible retaining the
greasem particles suspended in the air, therefore
it is subject to clogging with variable frequency
according to the use of the appliance.
• If the appliance is equipped with courtesy lights it
is possible to use them for general room lighting
for a prolonged amount of time.
- To prevent the danger of possible fires, at least
every 2 months one must wash the anti-grease fil-
ters by hand using non-abrasive neutral liquid de-
tergents or in the dishwasher at low temperatures
and on short cycles.
- After a few washes, colour alterations may occur.
This does not give the right to claim their replace-
ment.
• The active carbon filters are used to purify the air
that is sent back into the room and its function s
to mitigate the unpleasant odours produced by
cooking.
• Attention: the non compliance with the hood
cleaning warnings and with the replacement and
cleaning of the filters entails risk of fires. One
therefore recommends keeping to the suggested
instructions.
4.1 Replacing LED lamps (Fig.7):
If the appliance version is with LED lamps, the in-
tervention of a specialised technician is necessary
to replace them.
- The non-regenerable active carbon filters must
be replaced at least every 4 months. The satura-
tion of the active charcoal depends on the more or
less prolonged use of the appliance, on the type of
kitchen and on the frequency with which antigrease
filter is cleaned.
- Regenerable active charcoal filters must be
washed by hand, with non abrasive neutral deter-
gents, or in the dishwasher at a maximum tempera-
ture of 65°C (the washing cycle must be complete
without dishware). Remove excess water without
damaging the filter, remove the plastic parts, and let
the mat dry in the oven for at least 15 minutes ap-
proximately at a maximum temperature of 100°C.
To keep the regenerable charcoal filter functioning
efficient this operation must be repeated every 2
months. These must be replaced at least every 3
years or when the mat is damaged.
Fig.7
Hood / User ManuDalownload from Www.Somanuals.com. All Manuals Search And Download.
9 / 11 EN
4 Use and Maintenance
• Commands (Fig.10) mechanical the key symbols
are explained below:
A = LIGHT
4.2 Replacing halogen light bulbs
(Fig.8):
To replace the halogen light bulbs B, remove the
glass pane C using a lever action on the relevant
cracks. Replace the bulbs with new ones of the
same type. Caution: do not touch the light bulb with
bare hands.
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III.
Fig.10
If your appliance has the INTENSIVE speed function,
from speed THREE, press key E for 2 seconds and
it will be activated for 10 minutes after which it will
return to the previously set speed. When the func-
tion is active the LED flashes.
To interrupt it before the 10 minutes have elapsed,
press key E again. Some models allow activating
this function even with speed one and two.
Fig.8
By pressing key F for two seconds (with the hood
switched off) the “clean air” function is activated.
This function switches the appliance on for ten min-
utes every hour at the first speed. As soon as this
function is activated the motor starts up at the first
speed for ten minutes. During this time key F and
key C must flash at the same time.After ten minutes
the motor switches off and the LED of key F remains
switched on with a fixed light until the motor starts
up again at the first speed after fifty minutes and
keys F and C start to flash again for ten minutes
and so on. By pressing any key for the exclusion
of the hood light the hood will return immediately
to its normal functioning (e.g. if key D is pressed
the “clean air” function is deactivated and the motor
moves to the 2nd speed straight away. By pressing
key B the function is deactivated).
Fig.9
Download from Www.Somanuals.com. All Manuals Search And DownloaHd.ood / User Manual
10 / 11 EN
4 Use and Maintenance
(*) The “automatic stop timer” delays stopping of the
hood, which will continue functioning for 15 minutes
at the operating speed set at the time this function
is activated.
• Anti-grease/active charcoal filters saturation:
- When the A key flashes with a 2 second frequency
the antigrease filters must be washed.
- When the A key flashes with a 0.5 second fre-
quency the active carbon filters must be replaced or
washed depending on the type of filter.
Once the clean filter has been put back one must
reset the electronic memory by pressing the A key
for approximately 5 seconds until it stops flashing.
Hood / User ManuDalownload from Www.Somanuals.com. All Manuals Search And Download.
11 / 11 EN
5 Guarantee and Service
Your Beko product is guaranteed against the cost of breakdown re-
pairs for 2 years from the date of the original purchase.
Important notes
•
The product is guaranteed for domestic household use only.
•
The guarantee will be void if the product is installed or used in
commercial or non-residential domestic household premises.
What is covered?
•
All repairs necessary as a result of faulty materials, defective
•
•
The product must be correctly installed, located and operat-
ed in accordance with the instructions contained in the User
Instructions Booklet provided.
components or manufacturing defect.
•
•
The cost of functional replacement parts.
The labor costs of a Beko approved repairer to carry out the
repair.
Professional installation by a qualified plumber/electrical ap-
pliance installer is recommended for all Washing & Dishwash-
ing Machines and Electric Cookers.
What is note covered?
•
•
Gas Cookers must only be installed by a Gas Safe (or BORD
GAIS) registered Gas Installer.
•
•
•
•
•
Transit or delivery damage
Accidental damage
The guarantee is given only within the boundaries of the Unit-
ed Kingdom.
Misuse, or abuse
•
•
The guarantee is not transferable if the product is resold.
Cabinet or appearance parts, including knobs and flaps
Beko plc. disclaims any liability for incidental or consequential
damages.
Accessory items, including ice trays, scrapers, cutlery bas-
kets
•
The guarantee does not in any way diminish your statutory or
legal rights.
•
•
Repairs required as a result of unauthorized repairs or inex-
pert installation that fails to meet the requirements contained
in the user instruction book.
Repairs to products used on commercial or non-residential
household premises
HOW TO OBTAIN SERVICE UNDER THE MANUFACTURERS GUARANTEE
Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention in
the guarantee period
You should also complete the details below; it will help us assist you quicker when requesting service. (The model number is printed on the
Instruction Booklet)
Model Number :
Purchased From :
Date of purchase :
For service under guarantee simply telephone the appropriate number below
LOCATION
UK Mainland & Northern Ireland
TELEPHONE
Fridges & Freezers
0845 600 4903/0345 600 4903
0845 600 4902/0345 600 4902
0845 600 4905/0345 600 4905
0845 600 4906/0345 600 4906
Electric Cookers
Gas & Dual Fuel Cookers
Washing Machines & Dishwashers
Republic of Ireland
All Refrigeration, Cooking, Washing & Dishwashing Machines
01 862 3411
Before requesting service please check the troubleshooting guide in
the Operating Instructions as a charge may be levied where no fault
is found even though your product may still be under guarantee.
Service once the manufactures guarantee has expired.
If you have purchased an extended guarantee agreement document.
Otherwise please call the above numbers where service can be ob-
tained at a charge.
Should you experience any difficulty in obtaining service please call the
Beko Customer Help-Line on 0845 600 4911/0345 600 4911
Beko Plc, Beko House, 1 Greenhill Crescent, Watford Herts, WD18 8QU, Tel: 0845 600 4911
Download from Www.Somanuals.com. All Manuals Search And Download.
14 / 14 EN
Cooker Hood / User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|