USER’S GUIDE
DRAFT
BOXLIGHT SP-10t
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Voor de klanten in Nederland
Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar
inleveren als KCA.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-
conditioning equipment.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instruction
Air Circulation
Installing the Projector in Proper Position
Install the projector properly. Improper Installation may reduce
the lamp lifetime and cause a fire hazard.
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
20˚
Do not tilt the projector more than 20
CAUTION
degrees to either side.
20˚
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
Do not point the projector up to pro-
ject an image.
– Do not touch a peripheral part of the exhaust vent, espe-
cially screws and metallic part. This area will become hot
while the projector is being used.
NO UPWARD
– Do not put anything on the cabinet. The materials put on
the cabinet will not only get damaged but also cause fire
hazard by heat.
Cooling fans are provided to cool down the projector. This
projector monitors internal temperature and control the run-
ning speed of the cooling fans.
Do not point the projector down to
project an image.
NO DOWNWARD
Do not put the projector on either
side to project an image.
NO SIDEWARD
Moving the Projector
When moving the projector, replace the Lens Cover and
retract Adjustable Feet to prevent damage to the lens and
cabinet.
Air Intake Vent
When the projector is not in use for an extended period, put
it into the case (carrying bag) supplied with the projector.
Exhaust Vent
(Hot air exhaust)
CAUTION
Carrying Bag (supplied) is intended for protection from dust
and scratches on the surface of a cabinet, and it is not
designed to protect an appliance from external forces. Do not
transport a projector through a courier or transport services
with this bag, otherwise the projector can be damaged. When
handling a projector, do not drop, bump, subject it to strong
forces or put other things on the cabinet.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
– Do not drop or bump a projector, otherwise damages or
malfunctions may result.
– When carrying a projector, use a suitable carrying case.
– Do not transport a projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to a projector. To transport a projector through a
courier or transport service, consult your Boxlight dealer for
best way.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
Responsible party : BOXLIGHT
: BOXLIGHT SP-10t
: Boxlight
Model Number
: TGX0043-011010 (1AV4U20B69000)
IR Presentation Remote Receiver for Projector
: HOSIDEN
Trade Name
Address
: 19332 Powder Hill Place Poulsbo,
Responsible Party : Hosiden America Corp.
WA 98370-7407 USA
: (800)762-5757 or +1-360-779-7901
Address
Telephone No.
: 120 East State Parkway, Schaumburg, IL, 60173
: (847)885-8870
Telephone No.
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be
unable to insert the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features and Design . . . . . . . . . . . . . . . . . . . . . . . . . .7
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Top panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Operating Range . . . . . . . . . . . . . . . . . . . . . . . . .11
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connecting the AC Power Cord . . . . . . . . . . . . . . .12
Positioning the Projector . . . . . . . . . . . . . . . . . . . . .13
Adjustable Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Remote Control Battery Installation . . . . . . . . . . . .14
Attaching the Lens Cover . . . . . . . . . . . . . . . . . . . .14
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Connecting to a Computer . . . . . . . . . . . . . . . . . . .15
Connecting to Video Equipment . . . . . . . . . . . . . . .16
Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
How to Operate the On-Screen Menu . . . . . . . . . .17
Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Turning On the Projector . . . . . . . . . . . . . . . . . . . . .19
Turning Off the Projector . . . . . . . . . . . . . . . . . . . . .19
Adjusting the Screen . . . . . . . . . . . . . . . . . . . . . . . .20
Zoom Adjustment . . . . . . . . . . . . . . . . . . . . . . . .20
Focus Adjustment . . . . . . . . . . . . . . . . . . . . . . . .20
Keystone Adjustment . . . . . . . . . . . . . . . . . . . . .20
Picture Freeze Function . . . . . . . . . . . . . . . . . . .20
No Show Function . . . . . . . . . . . . . . . . . . . . . . . .21
P-Timer Function . . . . . . . . . . . . . . . . . . . . . . . . .21
Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . .21
Computer Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Input Source Selection . . . . . . . . . . . . . . . . . . . . . .22
Computer System Selection . . . . . . . . . . . . . . . . . .23
PC Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Auto PC Adjustment . . . . . . . . . . . . . . . . . . . . . .24
Manual PC Adjustment . . . . . . . . . . . . . . . . . . . .25
Image Level Selection . . . . . . . . . . . . . . . . . . . . . . .27
Image Level Adjustment . . . . . . . . . . . . . . . . . . . . .28
Screen SIze Adjustment . . . . . . . . . . . . . . . . . . . . .29
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Input Source Selection ( Video, S-Video ) . . . . . . . . . .30
Input Source Selection ( Component, RGB Scart 21-pin) . .31
Video System Selection . . . . . . . . . . . . . . . . . . . . . .32
Image Level Selection . . . . . . . . . . . . . . . . . . . . . . .33
Image Level Adjustment . . . . . . . . . . . . . . . . . . . . .34
Screen Size Adjustment . . . . . . . . . . . . . . . . . . . . .35
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Using the Presentation Remote Control . . . . . . . . .39
Presentation Remote Control . . . . . . . . . . . . . . . . .39
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Lamp Replacement . . . . . . . . . . . . . . . . . . . . . . . . .40
Lamp Replace . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Lamp Replace Counter . . . . . . . . . . . . . . . . . . . .41
Warning Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .42
Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Cleaning the Projection Lens . . . . . . . . . . . . . . . . . .43
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Indicators and Projector Condition . . . . . . . . . . . . . .46
Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Compatible Computer Specifications . . . . . . . . . . .49
Technical Specifications . . . . . . . . . . . . . . . . . . . . .50
Configuration of Terminals . . . . . . . . . . . . . . . . . . .51
Optional Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
TRADEMARKS
• Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
• IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
• Windows and PowerPoint are registered trademarks of Microsoft Corporation.
• Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its respective
corporation.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and Design
BOXLIGHT SP-10t is designed with the most advanced technology for portability, durability, and ease of use. This projector
utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
Digital Zoom (for Computer)
Greater Mobility
Digital Zoom function expands (to approx. 16 times of
screen size) or compress the image size, allowing you to
focus on crucial information at a presentation. ( ꢀ P29 )
Extremely compact in size and weight. It is designed to
be carried and work anywhere you wish to use.
Outstanding Compatibility
Digital Keystone Adjustment
This projector widely accepts various video and
computer input signals including;
Positioning height of the projector may result in distorted
image being displayed in a trapezoid shape. Keystone
Adjustment solves this problem by digitally altering
projection to produce undistorted images. ( ꢀ P20, P36 )
– Computers
IBM-compatible or Macintosh computer up to
1280 x 1024 resolution.
– 6 Color Systems
Interlace Progressive Conversion
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-N
color system can be connected.
– Component Video
Component video signal, such as a DVD player
output, high definition TV signals including 480i,
480p, 575i, 575p, 720p, 1035i or 1080i, can be
connected.
HIgh-quality picture is available with this technology
which converts interlace signal into progressive signal.
( ꢀ P35 )
Multi-language Menu Display
Operation menu is displayed in; English, German,
French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean or Japanese. ( ꢀ P36 )
– S-Video
S-Video signal, such as a S-VHS VCR output signal,
can be connected.
– RGB Scart
User Logo
RGB Scart signal can be connected.
A projected image can be captured and used for the
starting display of the projector. (ꢀ" Capture function" P36 )
You can also display the captured image in an interval
during your presentation instead of blackout image.
( ꢀ" No Show function " P21 )
Superb Image Quality
Supports 800 x 600 dots resolution for computer input.
Resolution from a computer between SVGA (800 x 600)
and SXGA (1280 x 1024) is precisely compressed into
800 x 600 dots.
Power Management
Provided to reduce power consumption and maintain the
Multi-Scan System
lamp life. ( ꢀ P37 )
This projector has Multi-Scan System to conform to
almost all computer output signals quickly. No need for
troublesome manual adjustment of frequency and other
settings. ( ꢀ P23 )
Key Lock Function
Provided to lock the operation of the projector. This
function protects the projector from being tampered
with by third persons. ( ꢀ P38 )
Auto PC Adjustment
Incoming computer signals are recognized and the best
adjustment is automatically set by Auto PC Adjustment.
No complicated setup is necessary and projection is
always precise. ( ꢀ P24 )
Presentation Remote Control
The provided Presentation Remote Control can be used
as a wireless mouse to control the mouse cursor on the
computer screen. This is extremely useful while giving
presentations. ( ꢀ P39 )
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
qZoom Lever ( ꢀ P20 )
wInfrared Remote Receiver ( ꢀ P11 )
eFocus Ring ( ꢀ P20 )
rProjection Lens ( ꢀ P43 )
tLens Cover
Front
q
w
yAir Intake Vent ( ꢀ P43 )
uExhaust Vent
CAUTION
i
u
e
r
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
iSpeaker
t
y
qAir Intake Vent ( ꢀ P43 )
Back
wTerminals and Connectors ( ꢀP10, 15,16 )
ePower Cord Connector ( ꢀ P12 )
rExhaust Vent
y
CAUTION
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
q
w
t
r
tAir Intake Vent ( ꢀ P43 )
yTop Controls and Indicators ( ꢀP9 )
e
qAir Filters( ꢀ P43 )
Bottom
wAir Intake Vents ( ꢀ P43 )
eAdjustable Feet ( ꢀ P14 )
e
w
CAUTION
Hot air is exhausted from the exhaust vents.
When using or installing the projector, the follow-
ing precautions should be taken.
–
–
–
Do not put any flammable objects near these
vents.
Keep front grills at least 3’(1m) away from any
objects, especially heat-sensitive objects.
Do not touch this area, especially screws and
metallic part. This area will become hot while
the projector is being used.
q
This projector detects internal temperature and
will automatically adjust the running speed of the
cooling fans.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Top panel
i
u
y
WARNING
LAMP
POWER
REPLACE
t
r
q
w
e
INPUT
ON-OFF
MENU
SELECT
qPOWER ON-OFF button
yLAMP REPLACE indicator
Turns the projector on or off. ( ꢀ P19 )
Turns yellow when the life of the projection lamp draws
to an end. ( ꢀ P40 )
wSELECT button
uWARNING indicator
–Executes the selected item. ( ꢀ P17 )
Lights red when the projector is in the abnormal
condition. This indicator also flashes red when the
internal projector temperature goes up over the
operating range. ( ꢀ P42 )
–Expands / compresses the image in Digital Zoom
mode. ( ꢀ P29 )
+ / –
buttons
ePoint ed7 8 ( VOLUME
)
– Select an item or adjust value in the On-Screen Menu.
( ꢀP17 )
– Pan the image in DIGITAL ZOOM +/– mode. ( ꢀ P29 )
– Adjust volume level. (Point 7 8 buttons) ( ꢀ P21 )
iPOWER indicator
Flashes red until the projector gets ready to be turned
on. It turns red when the projector is in the stand-by
mode. It remains green while the projector is in
operation. ( ꢀ P19,37,42 )
r MENU button
Opens or closes the On-Screen Menu. ( ꢀ P17 )
t INPUT button
Selects input source. ( ꢀ P22,P30 )
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
w
Terminals
q
e
✽
RESET
VIDEO
S-VIDEO
SERVICE PORT
COMPUTER IN /
USB
COMPONENT IN/
AUDIO IN
COMPUTER /
COMPONENT
AV
u
y
t
r
q VIDEO
tAUDIO IN AV
Connect the composite video output from video
equipment. ( ꢀ P16 )
Connect audio output from video equipment. ( ꢀ P16 )
yAUDIO IN COMPUTER/ COMPONENT
Connect audio output from a computer or component to
this jack. ( ꢀ P15, P16 )
w S-VIDEO
Connect S-video output from video equipment. ( ꢀ P16 )
e SERVICE PORT
uCOMPUTER IN / COMPONENT IN
Connect computer output, component output or RGB
Scart 21-pin video output to this connector. ( ꢀ P15,
P16 )
This jack is used to service this projector.
r USB
Connect the USB port of your computer to this port
when you wish to use the PAGE ed buttons on the
remote control to scroll back and forth pages on the
screen of the connected computer. ( ꢀ P15, P38 )
✽ RESET button
A microprocessor included in the projector may occasionally
malfunction and need to be reset. If necessary, press this
button with a sharp tool to restart the unit. Do not use it
excessively.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
qPOWER ON-OFF button
Turns the projector on or off. ( ꢀ P19 )
Remote Control
wVIDEO button
Selects VIDEO input source. ( ꢀ P30 )
eCOMPUTER button
e
w
q
Selects COMPUTER input source. ( ꢀ P22 )
rMENU button
Opens or closes the On-Screen Menu. ( ꢀ P17 )
tPAGE ed button
Scroll back and forth pages on the screen when giving a
presentation. ( ꢀ P10, P38 )
yD.ZOOM ed button
Select the Digital zoom +/– mode and resize the image.
( ꢀ P29 )
-
COMPUTER VIDEO
ON OFF
uAUTO PC button
!
5
Automatically adjusts a computer image to its optimum
setting. ( ꢀ P24 )
!
4
r
iIMAGE button
-
+
MENU VOLUME SELECT VOLUME
Selects image level. ( ꢀ P27, P33 )
oFREEZE button
!
!
!
3
2
1
Freezes the picture. ( ꢀ P20 )
t
y
u
!
!
!
!
!
0
1
2
3
4
MUTE button
Mutes the sound. ( ꢀ P21 )
D.ZOOM PAGE KEYSTONE NO SHOW
P-TIMER button
Operates the P-timer function. ( ꢀ P21 )
-
TIMER
AUTO PC
P
IMAGE FREEZE MUTE
NO SHOW button
Temporarily turns off the image on the screen. ( ꢀ P21 )
KEYSTONE button
Corrects the keystone distortion. ( ꢀ P20, P36 )
+ / –
Point ed 7 8 ( VOLUME
– Select an item or adjust value in the On-Screen Menu.
( ꢀ P17 )
)
buttons
– Pan the image in DIGITAL ZOOM +/– mode. ( ꢀ P29)
– Adjust volume level. (Point Left/Right buttons)( ꢀ P21)
!
5
Select button
– Executes the selected item. ( ꢀ P17 )
– Expands / compresses the image in Digital Zoom mode.
( ꢀ P29 )
i
o
!0
To insure safe operation, please observe the following
precautions :
–
Do not bend, drop the remote control or expose
Remote Control to moisture or heat.
For cleaning, use soft dry cloth. Do not apply
benzene, thinner, splay or any chemical material.
–
16.4’
(5 m)
Operating Range
Point the remote control toward the projector
(Receiver Window) when pressing any button.
Maximum operating range for the remote control is
about 16.4’ (5m) and 60° in front of the projector.
30°
30°
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce risk of electrical
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power supply being in use.
Connect a projector with a peripheral equipment before turning a
projector on. (Refer to page 15 –16 for connection.)
CAUTION
For safety, unplug the AC Power Cord when an appliance is not used.
When this projector is connected to the outlet with the AC Power Cord,
an appliance is in Stand-by Mode and consumes a little electric power.
Connect AC Power Cord (supplied) to the
projector. The AC outlet must be near this
equipment and must be easily accessible.
Note:
The AC Power Cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below. The proper AC power cord must be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.
Projector side
AC Outlet side
For the U.S.A. and Canada
For Continental Europe
Ground
To the POWER CORD
CONNECTOR on the
projector.
To the AC Outlet.
(120 V AC)
To the AC Outlet.
(200 - 240 V AC)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Positioning the Projector
– This projector is designed to project on a flat projection surface.
– The projector can be focused from 4.3’(1.3m) to 21.3’(6.5m).
– Refer to the figure below to adjust a screen size.
Note:
The brightness in a room has a great influence on picture
quality. It is recommended to limit ambient lighting in order
to provide the best image.
A : B = 9 : 1
21.3’ (6.5m)
16.1’ (4.9m)
10.6’ (3.2m)
200”
Max. Zoom
150”
4.3’ (1.3m)
169”
Min. Zoom
100”
83”
A
127”
40”
34”
Center
B
Screen Size
(W x H) mm
4 : 3 aspect ratio
34"
40”
100”
150”
200”
4064 x 3048
–––––
691 x 518
4.3’ (1.3m)
813 x 610
4.9' (1.5m)
4.3’ (1.3m)
2032 x 1524
12.5' (3.8m)
10.6’ (3.2m)
3048 x 2286
19.0' (5.8m)
16.1' (4.9m)
Zoom (min)
Zoom (max)
21.3’ (6.5m)
–––––
Adjustable Feet
Picture tilt and projection angle can be adjusted by rotating the
adjustable feet. Projection angle can be adjusted at 8.0 degrees.
Lift the front of the projector and pull the feet lock latches on
the both sides of the projector.
1
Release the feet lock latches to lock the adjustable feet and
rotate them to adjust position and tilt.
2
To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
3
by Menu Operation. ( ꢀ P20 and P36 )
CAUTION
Feet
Latches
Lock
Adjustable Feet
Tilt the projector within the adjustable angle not to shorten the lamp life.
Proper angle should be taken.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Remote Control Battery Installation
Remove the battery
compartment lid.
Slide the batteries into
the compartment.
Replace the compartment
lid.
1
2
3
Two AAA size batteries
Pull up and remove
the lid.
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
To insure safe operation, please observe the following precautions :
–
–
–
–
–
–
–
–
–
Use (2) AAA, SUM-4 or R03 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture, or heat.
Do not drop the remote control.
If a battery has leaked on remote control, carefully wipe case clean and install new batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Attaching the Lens Cover
Thread the other end of the string through the
hole at the bottom of the projector. Then pass the
lens cover through the resulting loop of the string.
Tie a knot in the string to secure it in place.
Thread the string through the hole on the lens
2
1
cover and then tie a knot in the string to secure it
in place.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to a Computer
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
Monitor Output
Audio Output
USB port
USB
Cable ✽
VGA Cable
Audio Cable
(Stereo) ✽
If you wish to use Page LM buttons on
the remote control, connect USB port of
your computer to the USB socket of the
projector. ( ꢀ P10, P38 )
RESET
VIDEO
S-VIDEO
SERVE PORT
COMPUTER IN /
COMPONENT IN/
USB
AUDIO IN
COMPUTER /
COMPONENT
AV
Terminals of the Projector
Note :
N MAC ADAPTER (Not supplied)✽
When connecting the cable, the power
cords of both the projector and the external
equipment should be disconnected from
AC outlet. Turn the projector and peripheral
equipment on before the computer is
switched on.
A Macintosh adapter may be required when you use a
Macintosh computer.
Set switches as shown in the
table below depending on RES-
OLUTION MODE that you want
ON
ON
DIP
to use before you turn on pro-
jector and computer.
1
2
3
4
5
6
Cables used for connection
OFF
3
• VGA Cable ( HDB 15 pin )
• Audio Cable ( Mini Plug (stereo) ) ✽
• USB Cable ✽
1
2
4
5
6
13" MODE (640 x 480)
ON
ON OFF OFF OFF OFF
16" MODE (832 x 624) OFF ON OFF ON OFF OFF
• MAC Adapter ( For Macintosh ) ✽
19" MODE (1024 x 768) OFF ON
21" MODE (1152 x 870) ON ON
ON OFF OFF OFF
ON ON OFF OFF
✽ Not supplied.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to Video Equipment
Video Source (example)
Component video output
equipment. (such as DVD player or
high-definition TV source.)
Video Cassette Recorder
Video Disc Player
RGB Scart
21-pin Output
Audio Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Composite
Video Output
S-VIDEO
Output
Audio Output
Video
Cable ✽
(RCA x 1)
S-VIDEO
Cable ✽
Audio Cable
(stereo) ✽
Scart
Cable✽
Video Cable
(RCA x 3) ✽
Audio Cable
(stereo) ✽
RESET
VIDEO
S-VIDEO
SERVICE PORT
COMPUTER IN /
COMPONENT IN/
USB
AUDIO IN
COMPUTER /
COMPONENT
AV
Terminals of the Projector
Cables used for connection
Note :
The S-VIDEO jack has priority over the VIDEO jack under the
• Video Cable (RCA x 1) ✽
• S-VIDEO Cable ✽
condition of connecting both the S-VIDEO jack and the VIDEO
jack when selecting AUTO in the Input Menu.
• Audio Cables (Mini Plug) ✽
• Scart-VGA Cable ✽
• Component-VGA Cable ✽
Note:
When connecting the cable, the power
cords of both the projector and the
✽ Not supplied.
external
equipment
should
be
disconnected from AC outlet.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
How to Operate the On-Screen Menu
Menu bar
Menu icon
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
Press MENU button to display the On-Screen Menu.
Pointer
(red frame)
1
Pointer (red frame)
Press Point d button to move
the pointer.
Press Point 7 8 buttons to select a Menu icon to adjust.
Press Point ed buttons to select an item to adjust.
2
Item
Press SELECT button to show the item data. Press Point 7 8
buttons to adjust the data. Refer to the following pages for
respective adjustment.
3
SELECT
button
Note:
The selected item is not in effective until SELECT button is pressed.
Item data
Press Point 7 8 buttons
to adjust value or set
function.
COMPUTERRemote Control
Top Control
Point buttons
Point button
Used to move the
Pointer up/ down /
right / left.
Used to move the
Pointer up/ down /
right / left.
INPUT
MENU button
V
–
E
O
L
M
U
MENU
M
SELECT
-
+
MENU VOLUME SELECT VOLUME
L
E
O V
+
MENU button
SELECT button
SELECT button
Used to select the item.
Used to select the item.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Menu Bar
For Computer Source
Guide Window
PC System Menu
Image Select Menu
Screen Menu
Setting Menu
Shows the selected
item of the On-
Screen Menu.
Used to select
Used to select an
image level among
Standard, Real,
Used to adjust size
of image. [Normal
/ True / Wide /
Used to change
computer system.
settings of the
(
ꢀ
P23 )
projector or reset
Lamp replace counter.
and Image 1 – 4.
Digital zoom +/–]
(
ꢀ
P27 )
(
ꢀ
P29 )
(
ꢀ
P36-38 )
Input Menu
PC Adjust Menu
Image Adjust Menu
Sound Menu
Used to select
input source
Used to adjust
parameters to
match with input
signal format.
Used to adjust computer image.
[Contrast / Brightness / Color
temp. / White balance (R/G/B)
Gamma / Auto grayscale]
Used to adjust
volume or
either Computer
or Video.
/
mute sound.
(
ꢀ
P21 )
(
ꢀ
P22 )
(
ꢀ
P24-26 )
(
ꢀ
P28 )
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select
input source
either Video or
Computer.
Used to select an
image level among
Standard, Cinema and
Image 1 – 4.
Used to set size
of image to
Normal or Wide.
(
ꢀ
P35 )
(
ꢀ
P30-31 )
(
ꢀ
P33 )
Same function as
menu for computer
source.
Same function as menu
for computer source.
Image Adjust Menu
Used to adjust picture image.
AV System Menu
Used to select
system of selected
video source.
[Contrast / Brightness / Color / Tint
/
Color temp. / White balance (R/G/B) /
Sharpness / Gamma / Auto
grayscale / Progressive]
(
ꢀ
P32 )
(
ꢀ
P34 )
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning On the Projector
Complete peripheral connections (with a computer, VCR, etc.)
before turning on the projector.
1
26
Connect the projector's AC Power Cord into an AC outlet. The
POWER indicator flashes in a moment and then turns red.
2
3
Press POWER ON-OFF button on the top control or the remote
control. The POWER Indicator turns green, and the cooling fans
start to operate. The starting display appears on the screen and
the count-down starts.
– The starting display disappears after 30 seconds.
– The starting display can be changed. (
" Capture " P36 )
ꢀ
After the count-down, the input source that was selected last
and the Lamp mode status appear on the screen.
4
Selected Input Source and Lamp Mode
Lamp mode
(
" Lamp mode " P37 )
ꢀ
Turning Off the Projector
Press the POWER ON-OFF button on the top control or the
remote control, and the message " Power off? " appears on the
screen.
1
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator starts to flash red and continues
while the cooling fans are operating. (for approx. 90 seconds)
Power off?
2
When the projector is cooled down enough to be turned on
again, the Power indicator turns red again. Then you can
disconnect the AC power cord.
Message disappears after 4 seconds.
3
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
DO NOT DISCONNECT THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE POWER
INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT IN
SHORTENING LAMP LIFE.
Note :
–
When the Power Management function is ON, the projector detects signal
interruption and automatically turns off the projection lamp. ( ꢀ P 37 )
The projector cannot be turned on during the cooling period with the
POWER indicator flashing red. You can turn it on again after the POWER
indicator lights red.
Do not use the projector for more than 24 hours continuously. Turn off the
projector at least once in 24 hours and give it a rest. Continuous use may
result in shortening the lamp lifetime.
–
–
–
–
This projector detects internal temperature and automatically controls the
running speed of the cooling fans.
If the WARNING indicator flashes or lights red, see “Warning Indicator” on
page 42
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Adjusting the Screen
Zoom Adjustment
Move the Zoom Lever upward / downward to zoom the image.
Tele
Wide
Zoom Lever
Focus Adjustment
Rotate the Focus ring to adjust the projected picture focus.
Focus Ring
Keystone Adjustment
If a projected picture has keystone distortion, correct image with the keystone adjustment.
Press KEYSTONE button on the remote control or select
Keystone on the Setting menu ( ꢀ P36 ) to display the Keystone
dialog box.
1
Correct keystone distortion by pressing Point ed buttons.
Press Point e button to reduce the upper part of image, and
press Point d button to reduce the lower part.
2
–
–
Arrows are white in no correction.
The arrow of direction being corrected turns
red.
–
–
The arrow disappears at the maximum
correction.
If you press the KEYSTONE on the remote
control once more while the keystone dialog
box is being displayed, the adjustment will be
canceled.
Reduce the upper width with Point e button.
Reduce the lower width Point d button.
Picture Freeze Function
Press FREEZE button on the remote control to freeze the picture on-
screen. To cancel the freeze function, press FREEZE button again or
press any other button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
No Show Function
Press NO SHOW button on the remote control to black out the image.
To restore to normal, press the NO SHOW button again or press any
other button. When a projected image is captured and set as “User”
in the Logo item in the Setting menu ( ꢀ P36 ), the screen changes
each time you press the NO SHOW button as follows :
......
black out ➜ the captured image ➜ normal ➜
Message disappears after 4 seconds.
P-Timer Function
Press P-Timer button on the remote control. The timer display “00 :
00” appears on the screen and the timer starts to count time (00 : 00
~ 59 : 59).
To stop P-Timer display, press the P-TIMER button. And then, press
P-TIMER button again to cancel P-Timer function.
Sound Adjustment
Indicates approximate
level of volume.
Direct Operation
Volume
Press VOLUME (+/–) button on the remote control or on the top
control to adjust volume. The volume dialog box appears on the
screen for a few seconds.
VOLUME (+) button to increase volume, and VOLUME (–) button for
decreasing.
Mute
Press MUTE button to set
Mute function On or Off.
The display disappears after 4 seconds.
Press MUTE button on the remote control to cut off sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–).
Menu Operation
Sound Menu icon
SOUND MENU
Press MENU button to display the On-Screen Menu. Press Point
1
7 8 buttons to move the red frame pointer to SOUND Menu
icon.
Press Point d button to move the red frame pointer to the item
that you want to select, and then press SELECT button.
2
Indicates approximate
level of volume.
Volume
Close Sound Menu.
To increase volume, press Point 8 button, and press Point 7 button to
decrease volume.
Mute
Press Point 7 8 buttons to mute sound. Dialog box display is changed
to “On” and sound is muted. To restore sound to its previous level,
press Point7 8 buttons again.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Input Source Selection
INPUT button
Computer
Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Video
Menu Operation
Input Menu icon
Press the MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to INPUT
Menu icon.
INPUT MENU
1
Press Point d button to move the red arrow pointer to
Computer and then press SELECT button. The Source Select
Menu will appear.
Move the pointer (red
arrow) to Computer and
press SELECT button.
2
Move the pointer to the correct input source and press SELECT
button.
3
Source Select Menu
When the input source is coming from a computer
through the COMPUTER IN / COMPONENT IN
terminal, select RGB.
RGB
Move the pointer to RGB and
press the SELECT button.
ꢀ " Selecting Input Source (Component / RGB-Scart
21-pin ) " P31.
Component
RGB (Scart)
ꢀ " Selecting Input Source (Component / RGB-Scart
21-pin ) " P31.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan
system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal
format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is
shown on page 49 )
Note : The projector may display one of the following messages.
When projector cannot recognize connected signal as PC
system provided in this projector, Auto PC Adjustment
function operates to adjust projector and the message
“Auto” is displayed on System Menu icon. (ꢀ P24.)
When image is not provided properly, manual adjustment
is required. (ꢀ P25 - 26 )
PC SYSTEM MENU
Auto
System Menu icon
Displays system being
selected.
There is no signal input from computer. Make sure the
connection of computer and a projector is set correctly.
(ꢀ " Troubleshooting" P44 )
-----
User preset adjustment in Computer Adjustment.
Adjustment data can be stored in Mode 1 - 5. ( ꢀ P25-
26 )
Mode 1
Computer systems provided in the projector. The
projector chooses a proper system and displays it.
SVGA 1
*Mode 1 and SVGA 1 are examples.
SYSTEM Menu icon
Displays system being selected.
PC SYSTEM MENU
Selecting Computer System Manually
PC system can be also selected manually.
Press MENU button to display the On-Screen Menu. Press Point
7 8 buttons to move the red frame pointer to PC SYSTEM
Menu icon.
The systems on this dialog box
can be selected.
1
Press Point d button to move the red arrow pointer to the
2
system that you want to set, and then press
SELECT button.
Custom Mode (1–5) set in PC
Adjust Menu. ( ꢀ P24-26 )
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
PC Adjustment
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to your
computer. This function can be operated as follows.
PC Adjust Menu icon
Auto PC Adj.
Press the MENU button to display the On-Screen Menu. Press
Point 7 8 button to move the red frame pointer to PC Adjust
Menu icon.
PC ADJUST MENU
1
2
Press the Point d button to move the red frame pointer to Auto
PC Adj. icon and then press the SELECT button twice.
This Auto PC Adjustment can be also executed by pressing the
Auto PC button on the remote control.
Move the red frame pointer to Auto PC
Adj. icon and press SELECT button.
To store adjustment parameters :
Adjustment parameters from Auto PC Adjustment can be memorized
in this projector. Once parameters are memorized, the setting can be
done just by selecting Mode in PC System Menu ( ꢀ P23 ). Refer to
" Store " of Manual PC Adjustment section ( ꢀ 26 ).
Note :
–
Fine sync, Total dots and Picture Position of some computers can not be
fully adjusted with this Auto PC Adjustment function. When the image is
not provided properly through this function, manual adjustments are
required. ( ꢀ P25 )
–
Auto PC Adjustment function cannot be operated when “480p”, “575p”,
“480i”, “575i”, “720p (HDTV),” “1035i (HDTV)” or “1080i (HDTV)” is
selected on PC SYSTEM Menu ( ꢀ P23).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this
case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-
synchronized picture, a non-centered picture or a skewed picture.
The Manual PC Adjustment function allows you to precisely adjust several parameters to match those special signal
formats. You can store those adjusted parameters in the 5 independent memory areas, enabling you to call up whenever
you need.
PC Adjust Menu icon
Press MENU button to display the On-Screen Menu. Press Point
7 8 buttons to move the red frame pointer to PC Adjust Menu
icon.
PC ADJUST MENU
1
2
Press Point d button to move the red frame pointer to the item
that you want to adjust and then press SELECT button.
Adjustment dialog box will appear. Press Point 7 8 buttons to
adjust value.
Move the red frame pointer to the item
and press SELECT button.
Fine sync
Adjusts an image as necessary to eliminate flicker from the display.
Press Point 7 8 buttons to adjust value.(From 0 to 31.)
Shows status
(Stored / Free) of the
selected Mode.
Total dots
Selected Mode
Adjusts the number of total dots in one horizontal period. Press
Point 7 8 buttons and adjust number to match your PC image.
Horizontal
Adjusts horizontal picture position. Press Point 7 8 buttons to
adjust the position.
Press Point 7 8 buttons to
adjust the value.
Vertical
Adjusts vertical picture position. Press Point 7 8 buttons to adjust
the position.
Press SELECT button at this icon
to adjust “Clamp,” “Display area
(H/V)” or set “Full screen.”
Current mode
Press SELECT button to show the information of computer selected.
Clamp
Current mode
Adjusts clamp level. When the image has a dark bar(s), try this
adjustment.
Press SELECT button at
Current mode icon to show
the information of computer
connected.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Display area
Selects area displayed with this projector. Select the resolution at
Display area dialog box.
Press SELECT button at Display
area icon to show the Display
area dialog box.
Display area H
Adjustment of horizontal area displayed with this projector. Press
Point 7 8 buttons to decrease/increase value to match the
resolution of image. Then press the SELECT button.
Display area
Display area V
Adjustment of vertical area displayed with this projector. Press Point
7 8 buttons to decrease / increase value to match the resolution of
image. Then press the SELECT button.
Full screen
Press Point 7 8 buttons to switch Full screen function to “On” or
“Off.” Set “On” to resize the image with 4 x 3 aspect ratio to fit the
screen.
Note :
Display area, Display area (H/V) and Full screen cannot be adjusted when
“480p”, “575p”, “480i”, “575i”, “720i (HDTV)” , “1035i (HDTV)” or “1080i
(HDTV)” is selected on PC SYSTEM Menu
(
P23 ).
ꢀ
To clear adjustment data
Reset
Reset all adjust parameters on adjustment dialog box to previous
figure.
Mode free
To clear adjustment parameters previously set, move the red frame
pointer to Mode free icon and then SELECT button. Move the red
arrow pointer to the Mode that you want to clear and then press
SELECT button.
Close this dialog box.
Store
To store adjustment parameters, move the red frame pointer to
Store icon and then press SELECT button. Move the red arrow
pointer to any of Mode 1 to 5 that you want to store to and then
press SELECT button.
To store adjustment data
This Mode has parameters being stored.
Quit
Closes PC Adjust Menu.
Vacant Mode
Shows values of “Total
dots,” “Horizontal,”
“Vertical,” “Display area H,”
and “Display area V.”
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Image Level Selection
Direct Operation
Select image level among Standard, Real, Image 1, Image 2, Image 3
and Image 4 by pressing IMAGE button on the remote control.
IMAGE button
Standard
Real
Standard
Normal picture adjustment preset on this projector.
Image 1
Image 2
Image 3
Image 4
Real
Picture adjustment improved in reproduction of halftones. This
adjustment is suitable for providing better image in brighter place.
Image 1~4
User preset picture adjustment in Image Adjust Menu ( ꢀ P28 ).
Image Select
Menu icon
Menu Operation
Press MENU button to display the On-Screen Menu. Press Point
7 8 button to move the red frame pointer to Image Select Menu
icon.
IMAGE SELECT MENU
1
Move the red frame pointer to the
level and press SELECT button.
Press Point d button to move the red frame pointer to the level
that you want to set and then press SELECT button.
2
Standard
Normal picture adjustment preset on this projector.
Real
Picture adjustment improved in reproduction of halftones. This
adjustment is suitable for providing better image in brighter place.
The level being selected.
mage 1~4
I
User preset picture adjustment in Image Adjust Menu ( ꢀ P28 ).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Image Level Adjustment
Image Adjust
Menu icon
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to Image
Adjust Menu icon.
1
2
IMAGE ADJUST MENU
Press Point d button to move the red frame pointer to the item
that you want to adjust. and then press SELECT button. The
level of each item is displayed. Adjust each level by pressing
Point 7 8 buttons.
Move the red frame pointer to
the item to be selected and
then press SELECT button.
Contrast
Press Point 7 8 buttons to adjust the image contrast. (From 0 to 63.)
Brightness
Press Point 7 8 buttons to adjust the image brightness. (From 0 to 63.)
Selected Image level
Color temp.
Press Point 7 8 buttons to select the Color temp. level that you
want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press Point 7 8 buttons to adjust the red tone. (From 0 to 63.)
Press Point 7 8 buttons to
adjust value.
White balance (Green)
Press Point 7 8 buttons to adjust the green tone. (From 0 to 63.)
White balance (Blue)
Press Point 7 8 buttons to lighten the blue tone. (From 0 to 63.)
Gamma
Press Point 7 8 buttons to obtain better balance of contrast. (From 0
to 15.)
Store icon
Press SELECT button at this icon to
store the adjustment.
Auto grayscale
When this function is "ON", it automatically enhances contrast of
bright and dark part of image.
Image Level Menu
Move the red frame
pointer to any of
Image 1 to 4 where
you want to set and
then press SELECT
button.
Reset
Reset all adjustment to previous figure.
Store
To store manually preset image, move the red frame pointer to Store
icon and press SELECT button. The Image Level Menu will appear.
Move the red frame pointer to the Image 1 to 4 where you want to
set and then press SELECT button.
Quit
Closes Image Menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to Screen
Menu icon.
1
Screen Menu
SCREEN MENU
Press Point d button to move the red frame pointer to the
function that you want to select. Then press SELECT button.
2
Move the red frame to the function
and press SELECT button.
Normal
Provides an image to fit screen size.
True
Provides image in its original size. When the original image size is
larger than screen size ( 800 x 600 ), this projector enters “Digital
zoom +” mode automatically.
Note:
– This Screen Menu cannot be operated when
“720p (HDTV)”, “1035i (HDTV)” or “1080i
(HDTV)” is selected on PC System Menu. ( ꢀ P23 ).
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
– True and Digital zoom +/– cannot be selected
when “480i ”, " 575i ", " 480p ", " 575p " is
selected on PC System Menu (ꢀ P23 ).
Digital zoom +
– This projector cannot display any resolution
higher than 1280 X 1024. If your computer’s
screen resolution is higher than 1280 X 1024,
reset the resolution to the lower before
connecting projector.
When Digital zoom + is selected, the On-Screen Menu disappears
and the message “D. Zoom +” is displayed. Press SELECT button
to expand image size. And press Point ed7 8 buttons to pan the
image. The panning function can work only when the image is larger
than screen size.
A projected image can be also expanded by pressing D.ZOOM e
button on the remote control.
– The image data in other than SVGA (800 x 600)
is modified to fit the screen size in initial mode.
– The panning function may not operate properly
if the computer system prepared on PC Adjust
Menu is used.
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu disappears
and the message “D. Zoom –” is displayed. Press SELECT button
to compress image size.
A projected image can be also compressed by pressing D.ZOOM M
button on the remote control.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
ed, SELECT and Point buttons.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Input Source Selection ( Video, S-Video )
INPUT button
Video
Direct Operation
Choose Video by pressing INPUT button on the top control or VIDEO
button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Computer
Menu Operation
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to INPUT
Menu icon.
1
INPUT MENU
Press Point d button to move the red arrow pointer to Video
and then press SELECT button. Source Select Menu will
appear.
2
Move the red arrow
pointer to Video and
press SELECT button.
Move the pointer to the source that you want to select and then
press SELECT button.
3
VIDEO
When selecting Auto, the projector automatically detects
incoming video signal, and adjusts itself to optimize its
performance. The projector selects connection in the
following order:
Auto
Source Select Menu (VIDEO)
Move the pointer to the
source and press SELECT
button.
1st S-VIDEO
2nd VIDEO
The S-VIDEO has priority over the VIDEO
When video input signal is connected to VIDEO jack,
select Video.
Video
When video input signal is connected to S-VIDEO jack,
select S-Video.
S-Video
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Video input
Input Source Selection ( Component, RGB Scart 21-pin )
INPUT button
Video
Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Computer
Menu Operation
Press MENU button to display the On-Screen Menu. Press
Point 7 8 button to move the red frame pointer to INPUT Menu
icon.
1
Press Point d button to move the red arrow pointer to
Computer and then press SELECT button. The Source Select
Menu will appear.
2
Move the pointer to the source that you want to select and then
press SELECT button.
Input Menu icon
3
INPUT MENU
When the input source is coming from video
equipment connected to the COMPUTER IN
/COMPONENT IN terminal with a Component-VGA
Cable, select Component.
Component
RGB (Scart)
Move the pointer (red
arrow) to Computer and
press SELECT button.
When the input source is coming from video
equipment connected to the COMPUTER IN
/COMPONENT IN terminal with a Scart-VGA Cable,
select RGB (Scart).
Source Select Menu
Note :
Move the pointer to
Component or RGB ( Scart )
and press the SELECT button.
Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page
51 for order.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Video System Selection
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to AV System
Menu icon.
1
2
Press Point d button to move the red arrow pointer to the
system that you want to select and then press SELECT button.
Video Jack or S-Video Jack
AV SYSTEM MENU (VIDEO OR S-VIDEO)
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
AV System Menu icon
This box indicates the
system being selected.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to
the system and press
SELECT button.
COMPUTER IN / COMPONENT IN Jack ( Y, Pb/Cb, Pr/Cr)
AV SYSTEM MENU (COMPONENT VIDEO)
Auto
The projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
AV SYSTEM Menu icon
This box indicates the
system being selected.
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
Move the pointer to the
system
and
press
SELECT button.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Image Level Selection
Direct Operation
Select image level among Standard, Cinema, Image 1, Image 2,
Image 3 and Image 4 by pressing IMAGE button on the remote
control.
IMAGE button
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Standard
Normal picture adjustment preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Image 1~4
User preset picture adjustment in Image Adjust Menu (ꢀ P34-35 ).
Menu Operation
Press MENU button to display the On-Screen Menu. Press
Point 7 8 button to move the red frame pointer to Image Select
Menu icon.
IMAGE SELECT MENU
1
Press Point d button to move the red frame pointer to the level
that you want to set and then press SELECT button.
2
Image Select
Menu icon
Move the red frame pointer to the
level and press SELECT button.
Standard
Normal picture adjustment preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Image 1~4
The level being selected.
User preset picture adjustment in Image Adjust Menu (ꢀ P34-35 ).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Image Level Adjustment
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to IMAGE
ADJUST Menu icon.
IMAGE ADJUST MENU
1
2
Press Point d button to move the red frame pointer to the item
that you want to adjust and then press SELECT button. The
level of each item is displayed. Adjust each level by pressing
Point 7 8 buttons.
Image Adjust
Menu
Move the red frame point-
er to the item to be select-
ed and then press SELECT
button.
Contrast
Press Point 7 8 buttons to adjust the image contrast. (From 0 to 63.)
Brightness
Press Point 7 8 buttons to adjust the image brightness. (From 0 to 63.)
Color
Press Point 7 8 buttons to adjust color intensity. (From 0 to 63.)
Press Point 7 8 buttons
to adjust value.
Tint
Press SELECT button at this
icon to display other items.
Press Point 7 8 buttons to obtain proper color. (From 0 to 63.)
Color temp.
Press Point 7 8 buttons to select the Color temp. level that you
want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press Point 7 8 buttons to adjust the red tone. (From 0 to 63.)
Press Point 7 8 buttons
to adjust value.
White balance (Green)
Press Point 7 8 buttons to adjust the green tone. (From 0 to 63.)
White balance (Blue)
Press Point 7 8 buttons to adjust the blue tone. (From 0 to 63.)
Sharpness
Press Point 7 8 buttons to adjust the image sharpness. (From 0 to 15.)
Gamma
Press SELECT button at this icon
to store the value.
Press Point 7 8 buttons to obtain better balance of contrast. (From 0
to 15.)
NOTE : Tint cannot be adjusted when the video
system is PAL, SECAM, PAL-M or PAL-
N.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Input
Auto grayscale
When this function is "ON", it automatically enhances contrast of
bright and dark part of image.
progressive
Interlace video signal can be displayed in a progressive picture.
Off ···· Not activated.
L1 ···· Select “L1” for an active picture.
L2 ···· Select “L2” for a still picture.
Note : The Progressive cannot be selected when 1080i, 1035i, 480p, 575p,
or 720p is selected.
Reset
Image Level Menu
Reset all adjustment to previous figure.
Move the red frame
pointer to the image
icon to be set and
then press SELECT
button.
Store
To store the adjustment data, move the red frame pointer to
Store icon and press SELECT button. Image Level Menu will
appear. Move the red frame pointer to the Image Level 1 to 4
and then press SELECT button.
Quit
Closes the Image Menu.
Store icon
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to Screen
Menu icon.
SCREEN MENU
1
2
Move the red frame to
the function and press
SELECT button.
Press Point d button and move the red frame pointer to the
function that you want to select and then press SELECT button.
Screen Menu icon
Normal
Provides image at a normal video aspect ratio of 4 : 3.
Note:
The Screen Menu cannot be operated when
“720p,” “1035i,” or “1080i” is selected on the
AV System Menu( ꢀ P32 ).
Wide
Provides image at a wide screen ratio of 16 : 9.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Setting Menu
Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red-frame pointer to SETTING
icon.
SETTING MENU
1
2
Press Point d button to move the red-frame pointer to the item
Setting Menu
Set the red frame
that you want to set and then press
dialog box appears.
SELECT button. Setting
pointer to the item
and press SELECT
button.
Language
Language used in the On-Screen Menu is selectable from among
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean and Japanese.
Keystone
This function corrects the distorted image. Select either of Store or
Reset and press SELECT button. The keystone dialog box will
appear. ( ꢀ P20 )
Press SELECT button at
Language to show the
Language Menu.
Store
Store the keystone adjustment data even if the AC
power cord is disconnected.
Reset
Reset the keystone adjustment data when the AC
power cord is disconnected from the AC outlet.
Blue back
When this function is “On,” the projector will project a blue image
on the screen if any input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On . . . . . .shows all the On-Screen Displays.
Off . . . . . .sets On-Screen Displays disappeared except;
• On-Screen Menu
• “Power off?” message ( ꢀ P19 )
• P-TIMER ( ꢀ P21)
• “No signal” message ( ꢀ P37 )
• ”Wait a moment!” message
Capture
Logo
This function decides what to be displayed on the starting display.
User
Default ···· the factory set logo
Off ···· count-down only
···· the image you captured
Capture
Select [Yes] to capture
the projected image.
Select [No] to cancel.
This function is used to capture the image being projected and use it
for a starting-up display. After capturing the projected image, go to
the Logo function (above) and set it as “User”. Then the captured
image will be displayed when turning on the projector next time.
To capture the image, select [Yes]. To cancel the Capture function,
select [No].
Before capturing an image, select Standard in the Image Select
Menu to capture a proper image. ( ꢀ P27, P33 )
A signal from a computer can be captured up to XGA(1024 x 768). A
signal from video equipment can be captured except for 720p, 1035i,
and 1080i. When capturing the image that has been adjusted by the
Keystone function, the adjustment data is automatically reset and
the projector captures an image without keystone adjustment.
Select [Yes] to
stop capturing.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Ceiling function
Rear function
Ceiling
When this function is “On,” picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounted projector.
Rear
When this function is “On,” picture is left / right reversed. This
function is used to project the image to a rear projection screen.
Power management
Power management
For reducing power consumption as well as maintaining the lamp
life, the Power Management function turns off the projection lamp
when the input signal is interrupted and no button is pressed for 30
seconds or more.
If the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message " No signal "
appears on the screen. The count-down of the set time will get
started. The count-down time can be set between 1 and 30
minutes.
When the count-down time has been elapsed, the lamp will be
turned off to cool itself down. The POWER indicator is flashing red
during this cooling-off period. The next operation depends on the
setting as follows :
Press the SELECT button at Power
management to show this box.
Choose one of three settings with the
Point 7 8 button, and navigate to the
timer with the Point ed button and
set time with the Point 7 8 button.
Ready . . . . . . . . When the lamp has been fully cooled down, the
POWER indicator changes to green flashing. In
this condition, the projection lamp will be turned
on if the input signal is reconnected or any
button on the top control or remote control is
pressed.
Shutdown . . . . . When the lamp has been fully cooled down, the
power will be turned off.
Off . . . . . . . . . . . The Power Management function is canceled.
Time left until Lamp off
Lamp mode
Lamp mode
This function allows you to change brightness of the screen.
···· normal brightness
···· the controlled brightness according with input signal
···· lowers brightness, reduces the lamp power consumption,
and extends the lamp life.
Press Point 7 8 buttons to
select lamp mode.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Remote Control
Remote control
This projector has two different remote control codes; the factory-
set normal code (Code 1) and the secondary code (Code 2). This
switching function prevents remote control interference when
operating several projectors or video equipment at the same time.
When operating the projector in “Code 2,” both the projector and
remote control must be switched to “Code 2.”
Press and hold
-
+
MENU VOLUME SELECT VOLUME
MENU and IMAGE
buttons for 10 seconds
or more.
To change the code of the projector :
Set the remote control in the SETTING MENU to “Code 2.”
D.ZOOM PAGE KEYSTONE NO SHOW
To change the code of the remote control :
Press and hold both MENU and IMAGE buttons on the remote
control together for 10 seconds or more. After changing the code,
make sure the remote control operates properly.
-
TIMER
AUTO PC
P
IMAGE FREEZE MUTE
To return to the normal code (Code 1), operate both the projector
and remote control in the ways above again.
Note : When battery of the remote control is replaced, the remote control
code automatically returns to the normal code (Code 1).
USB
This projector is equipped with the USB port for interactive operation
between the projector and computer. Selects either of the
followings as needed.
Key lock
···· When using the PAGE ed buttons on the remote
control. ( ꢀ P10 )
···· When controlling the projector with a computer.
This item is provided for future use. Not available now.
Select Key lock to
display this box.
Choose one of
these with the
Point ed button
and select [Yes]
to activate it.
Key lock
This function locks operation of the top control and remote control.
It is useful to prevent operation by a third person.
···· Not locked.
···· Locks operation of the top control.
To unlock, use the remote control.
···· Locks operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you do not have
the remote control nearby, disconnect the AC power cord to turn off
the power, and then while pressing the SELECT button, reinsert the
AC power cord. This will unlock the top control operation.
Factory default
Lamp counter reset
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. Refer to page 41 for operation.
Select Factory
default to show
this box. Select
[Yes] to activate it.
Factory default
This function returns all setting values except for the lamp counter to
the factory default settings.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Presentation Remote Control
Presentation Remote Control
Presentation Remote Control performs the function of a wireless mouse to control the mouse cursor on the computer. For
convenience while giving presentations, some buttons controlling the projector are also provided.
For computer
Aim the remote control at the Presentation Remote receiver.
r
qPAGE LM buttons
Scroll back and forth pages on the screen when giving presentations.
wCursor button
e
Scroll back and forth pages on the screen when giving a presentation.
L-CLICK
R-CLICK
e R-CLICK button
Acts as the right button on a computer mouse.
PAGE
q
rL-CLICK button
w
Acts as the left button on a computer mouse.
To drag a selected item, press and hold the L-CLICK button and
move the cursor with the Cursor button.
For projector
Aim the remote control at the IR receiver of the projector.
o
i
tFREEZE button
t
y
Freezes the picture. ( ꢀ P20 )
-
TIMER
FREEZE NO SHOW
COMPUTER VIDEO
P
yCOMPUTER button
u
Selects COMPUTER input source. ( ꢀ P22 )
uVIDEO button
Selects VIDEO input source. ( ꢀ P30 )
iP-TIMER button
Operates the P-timer function. ( ꢀ P21 )
oNO SHOW button
Temporarily turns off the image on the screen. ( ꢀ P21 )
Installation
Connect the Projector and your computer
with the VGA cable.
1
2
Connect the Presentation Remote Receiver
to the USB port of your computer.
Note :
–
The Presentation Remote Receiver can only be
connected with a standard USB port..
–
Some computer settings may have to be changed
in order for the mouse function to be used. Refer to
your computer's owner's manual for details.
When switching the remote control code of the
projector and the remote control, that of the
presentation remote control also needs to be
switched. Press and hold both the FREEZE and P-
TIMER buttons together for 10 seconds or more to
switch the code. ( ꢀ P38 )
Presentation
Remote Control
–
VGA cable
Presentation
Remote Receiver
30°
Compatible computers
16.4’(5 m)
Windows
• Windows 98 / 2000/ Me / XP
✽ Compatible with only full versions of Windows.
(Upgraded version cannot be used.)
30°
Macintosh
• Mac OS 9.1 or later.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Lamp Replacement
Lamp Replace
When the life of the projection lamp draws to an end, LAMP
REPLACE indicator lights yellow. If this indicator lights yellow,
replace the projection lamp with a new one promptly.
TOP CONTROL
WARNING
POWER
LAMP
REPLACE
This indicator lights yellow when the
life of the projection lamp draws to an
end.
INPU
CAUTION
Allow a projector to cool, for at least 45 minutes before
you open Lamp Cover. The inside of a projector can
become very hot.
For continued safety, replace with a lamp assembly of
the same type.
Do not drop a lamp assembly or touch a glass bulb! The
glass can shatter and may cause injury.
Follow these steps to replace the lamp assembly.
Screw
Turn off the projector and disconnect AC plug. Allow the
projector to cool at least for 45 minutes.
1
To remove the lamp cover, remove the screw with a screwdriver .
2
3
Lamp Cover
Remove the two screws with a screwdriver and pull out the
lamp assembly by grasping the handle.
Replace the lamp assembly with a new one and tighten the two
screws back into the position. Make sure that the lamp
assembly is set properly. Replace the lamp cover and tighten
the screw.
4
Handle
Connect the AC Power Cord to the projector and turn on the
projector.
5
Reset the Lamp Replace Counter.
Refer to “Lamp Replace Counter” on the next page .
Lamp Assembly
6
Screws
Note :
Do not reset the Lamp Replace Counter when the projection lamp has not
been replaced.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through Boxlight at 1-800-762-5757 or 360-779-7901. When ordering a Projection
Lamp, give the following information to the dealer.
• Model No. of your projector
:
BOXLIGHT SP-10t
POA-LMP57
• Replacement Lamp Type No. :
(Service Parts No. 610 308 3117)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Lamp Replace Counter
Be sure to reset the lamp replace counter after Lamp Assembly is replaced. When the lamp replace counter is reset, the
LAMP REPLACE Indicator stops lighting.
Turn projector on, press MENU button to display the On-
Screen Menu. Press Point 7 8 button(s) to move the red
frame pointer to the Setting Menu icon.
1
Press Point d button to move the red frame pointer to
2
“Lamp counter reset” and then press
SELECT button. The
message " Lamp replace counter reset? " is displayed.
Move the pointer to [Yes] and then press SELECT button.
Move the pointer to Lamp counter reset and then
press SELECT button. The message “Lamp
replace counter reset?” is displayed.
Another confirmation dialog box appears and select [Yes] to
reset the lamp replace counter.
3
Note : Do not reset the Lamp Replace Counter until after the projection lamp is replaced.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may
result in accidents, injury, or create a fire hazard.
ꢁ Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of
the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than
other similar lamps.
ꢁ If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up,
replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the
lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.
ꢁ A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws
to an end. Risk of explosion may differ according to the environment or conditions in which the projector and
lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized
service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that
there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation
holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector
except those who are authorized trained technicians and who are familiar with projector service. Inappropriate
attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an
accident or injury caused by pieces of broken glass.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is flashing red
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect the
inside of the projector. The POWER indicator is flashing and the
projector is being cooled down. When the temperature inside the
projector returns to normal, the POWER indicator lights red and the
projector can be turned on.
Top Control
WARNING
LAMP
REPLACE
POWER
WARNING
flashing red
Note :
After the temperature inside the projector returns to normal, the WARNING
indicator still continues to flash. When the projector is turned on again, the
WARNING indicator stops flashing.
IN
F
Then check the items below.
ꢂ Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation slots
are not blocked.
ꢂ Is the projector not installed near the ventilation duct of air-
conditioning equipment which may be hot? Install the projector
away from the ventilation duct of air-conditioning equipment.
ꢂ Are the air filters clean? Clean the air filters periodically.
The projector is shut down and the WARNING indicator lights red
When the projector detects an abnormal condition, it is automatically
shut down to protect the inside and the WARNING indicator lights
red. In this case, disconnect the AC power cord and reconnect it, and
then turn the projector on once again for check. If the projector is still
turned off and the WARNING indicator lights red, disconnect the AC
power cord and call Boxlight at 1-800-762-5757 or 360-779-7901 for
service.
Top Control
WARNING
LAMP
REPLACE
POWER
WARNING
lights red
IN
CAUTION
F
DO NOT LEAVE THE PROJECTOR WITH THE AC POWER
CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Air Filter
Removable air filters prevent dust from accumulating on the surface of optical elements inside the projector. Should air
filters become clogged with dust particles, it will reduce the cooling fans’ effectiveness and may result in internal heat build
up and adversely affect the life of the projector. Clean air filters following the steps below:
Turn off the projector, and disconnect AC power cord from the
AC outlet.
Air filters
1
2
Turn the projector upside down and remove air filters by pulling
the latches upward.
Clean the air filters with a brush or wash out dust and particles.
3
4
Replace each air filter properly. Make sure that the air filters are
fully inserted.
CAUTION
Do not operate the projector with the air filters removed.
Dust may accumulate on optical elements inside the
projector degrading picture quality.
Do not put small parts into Air Intake Vents. It may result in
malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating a projector. Usage in these environments may cause
poor image quality.
When using under dusty or smoky conditions, dust may accumulate
on or optical elements inside the projector. This condition may
degrade the quality of a projected image.
When the above symptoms are noticed, contact Boxlight at 1-800-
762-5757 or 360-779-7901 for proper cleaning.
Cleaning the Projection Lens
Follow these steps to clean the projection lens:
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning
cloth. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents or other harsh chemicals might scratch a
surface.
1
Lightly wipe Projection Lens with a cleaning cloth.
2
3
When the projector is not in use, replace the Lens Cover.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the matters below once again.
– Make sure you have properly connected the projector to peripheral equipment as described in the section "Installation" on
P15-16.
– Make sure all equipment is connected to AC outlet and turned on the power.
– When you operate the projector with a computer, and it does not project an image, restart the computer.
– Try these Solutions
Problem:
No power.
– Plug the projector into your AC outlet.
– Make sure if the POWER Indicator lights red.
– Wait 90 seconds after a projector is turned OFF when turning the projector back on.
The projector can be turned on after the Power indicator turns red. ( "Turning Off the
ꢀ
Projector " P19 )
– Check WARNING TEMP. indicator. If the indicator flashes red, the projector cannot be
turned on. (
– Check the projection lamp. (
"Warning Indicator " P42 )
ꢀ
P40-41 )
ꢀ
– Unlock Key lock for the projector in the Setting Menu. (
P38 )
ꢀ
Image is out of focus.
– Adjust focus of the projector. (
P20 )
ꢀ
– Provide proper distance between the projector and projection screen. (
P13 )
ꢀ
– Check the projection lens to see if it needs cleaning. (
P43 )
ꢀ
– Moving the projector from a cool temperature location to a warm temperature location may
result in moisture condensation on the projection lens. In such an event, leave the
projector OFF and wait until condensation disappears.
Picture is Left/Right
reversed.
– Check Ceiling / Rear feature. (
“Setting” on page 37 )
ꢀ
Picture is Top/Bottom
reversed.
– Check Ceiling feature. (
“Setting” on page 37 )
ꢀ
Some displays are not
seen during the
Operation.
– Check Display feature.( “Setting” on page 36 )
ꢀ
No image.
– Check the connection between your computer or video equipment and the projector.
– Check if the input signal is correctly output from your computer. Some laptop computers
may need to change the setting for monitor output when connected to the projector. See
the computer's owner's manual for its setting.
– Check NO SHOW function. (
P21)
ꢀ
– When turning on the projector, it takes about 30 seconds to display an image.
– Check the system that you select is corresponding with your computer or video equipment.
– Select correct input source once again following the menu operation.
– Make sure the temperature is not out of the operating temperature range (5°C ~ 35°C).
No sound.
– Check audio cable connection from audio input source. (
– Adjust the audio source.
P15-16)
ꢀ
– Press VOLUME (+) button.(
P21)
ꢀ
– Press MUTE button. (
P21)
ꢀ
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Problem: – Try these Solution
Remote Control does
– Check the battery.
– Make sure nothing is between the infrared remote receiver and remote control.
– Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ ( 5m ).
not work.
– Make sure the code of the remote control is set to conform to the projector.
(
P38 )
ꢀ
– Unlock Key lock for the remote control in the Setting Menu. ( ꢀ P38 )
Presentation kit does
not work
– Check the presentation remote receiver is properly connected to your computer. (
– Check the mouse setting on your computer.
P39 )
ꢀ
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
after following all operating instructions,
360-779-7901. Give the model number and explain about the problem. We will advise you how to obtain service.
Boxlight for assistance at 1-800-762-5757 or
contact
If the problem still persists
Please have the following information available.
ꢁ Serial No. of projector.
ꢁ Resolution of the computer.
ꢁ Refresh rate of computer.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
Projector Condition
LAMP
WARNING
POWER
red/green
REPLACE
red
yellow
The projector is OFF. (The AC power cord is unplugged.)
The projector is preparing for stand-by or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed.
✽
✽
✽
✽
The projector is ready to be turned on with the POWER ON-OFF button.
The projector is operating normally.
The projector is in the Power management mode.
The temperature inside the projector is abnormally high. The projector
cannot be turned on. When the projector is cooled down enough and the
temperature returns to normal, the POWER indicator lights red and the
projector can be turned on. (The WARNING indicator keeps flashing.)
Check and clean the Air filter.
✽
✽
✽
The projector has been cooled down enough and the temperature returns
to normal. When turning on the projector, the WARNING indicator stops
flashing. Check and clean the air filters.
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup. Do not leave the pro-
jector on. It may cause electric shock or a fire hazard.
• • • flashes red.
• • • off
• • • lights green.
• • • flashes green.
• • • lights red.
✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights
yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp.
( ꢀ P40-41)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Menu Tree
Main menu
Input
Computer
RGB
Go to System (1)
Go to System (2)
Component
RGB( Scart )
Video
Auto
Go to System (3)
Go to System (3)
Go to System (3)
Video
S-Video
Computer Input
Main menu
Image Select
Image Adjust
Standard
Real
Image 1
Image 2
Image 3
Image 4
MODE 1
System (1)
MODE 2
SVGA 1
- - - -
✽Systems displayed in the system menu vary
depending on the using environment.
Contrast
0 - 63
0 - 63
High
Mid
Brightness
Color Temp
PC Adjust
Auto PC Adj.
Low
Fine sync.
Total dots
Horizontal
Vertical
Current mode
Clamp
0 - 31
XLow
Red
Green
Blue
0 - 63
0 - 63
0 - 63
Display area
640 x 480
720 x 400
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1400 x 1050
Quit
Gamma
Auto grayscale
Reset
0 - 15
On / Off
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
Store
Quit
Display area - H
Display area - V
Full screen
Reset
On / Off
Yes / No
Screen
Normal
True
Mode free
Store
Wide
Digital zoom +
Digital zoom –
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Quit
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Video Input
Settings
Main menu
Main menu
Sound
Auto
1080i
1035i
720p
575p
480p
575i
Volume
Mute
Quit
0 - 63
On / Off
System (2)
Setting
Language
English
German
French
Italian
480i
Spanish
Portuguese
Dutch
Auto
PAL
System (3)
Swedish
Russian
Chinese
Korean
Japanese
Quit
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Keystone
Blue back
Display
Store / Reset
On / Off
On / Off
Image Select
Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Logo
Off
User
Image Adjust
Contrast
Brightness
Color
Tint
Color Temp
0 - 63
0 - 63
0 - 63
0 - 63
High
Mid
Default
Yes/No
On / Off
On / Off
Off
Capture
Ceiling
Rear
Power management
Ready
Low
Shut down
1 - 30 Min
Quit
XLow
Lamp mode
Normal
Auto
Eco
Red
Green
Blue
Sharpness
Gamma
Auto grayscale
Progressive
Reset
0 - 63
0 - 63
0 - 63
0 - 15
Remote control
USB
Code 1
Code 2
Mouse
Projector
Off
Projector
Remote Control
Quit
0 - 15
On / Off
L1 / L2 / Off
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
Key Lock
Store
Lamp counter reset
Factory Default
Yes / No
Yes / No
Quit
Screen
Normal
Wide
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than
100 MHz of Dot Clock.
ON-SCREEN
DISPLAY
ON-SCREEN
DISPLAY
H-Freq.
(kHz)
V-Freq.
(Hz)
H-Freq.
(kHz)
V-Freq.
(Hz)
RESOLUTION
RESOLUTION
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
MAC 21
SXGA 1
SXGA 11
SXGA 13 1280 x 1024
SXGA 14 1280 x 1024
SXGA 17
SXGA 18 1280 x 1024
720p (HDTV)
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1152 x 900
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
68.68
64.20
61.20
50.00
50.00
61.85
46.43
45.00
33.75
33.75
28.125
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
35.00
640 x 480
––––––––
77.07
75.70
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
86.96
––––––––
––––––––
––––––––
575p
480i
575i
(Interlace)
60
58.20
58.30
72.00
75.08
75.06
70.40
65.20
(Interlace)
50
(Interlace)
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
86.00
(Interlace)
94.00
(Interlace)
1152 x 900
66.00
86.70
(Interlace)
––––––––
60.00
60.00
––––––––
1035i (HDTV)
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
––––––––
1080i (HDTV)
––––––––
1080i (HDTV)
NOTE : Specifications are subject to change without notice.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Technical Specifications
Multi-media Projector
Projector Type
10.63" x 3.07" x 7.48" (270mm x 78.0mm x 190mm) (not including Adjustable Feet)
4.6lbs (2.1 kg)
(W x H x D)
Dimensions
Net Weight
0.5" TFT Active Matrix type, 3 panels
800 x 600 dots
LCD Panel System
Panel Resolution
Number of Pixels
Color System
High Definition TV Signal
Scanning Frequency
Projection Image size
Projection Lens
Throw Distance
1,440,000 (800 x 600 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz
Adjustable from 34” to 200”
F 1.6 ~ 1.8 lens with f 18.3 mm ~ 21.9 mm with manual zoom and focus
4.3’ ~ 21.2’ (1.3 m ~ 6.5 m)
(Diagonal)
160 W
Projection Lamp
RCA Type x 1 (Video) and Mini DIN 4 pin x 1 (S-Video)
Mini Jack (stereo) x 1
Video Input Jack
Audio Input Jack
(VGA) HDB 15 Terminal x 1
Computer Input Terminal
Computer Audio Input Jack
Control Port Connector
USB Connector
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series B receptacle x 1
0.8 W RMS
Internal Audio Amp
Built-in Speaker
1 speaker, ø1.3" (32mm)
0˚ to 8.0˚
Feet Adjustment
Voltage and
Power Consumption
AC 100 ~ 120 V (2.4 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.2 A Max. Ampere), 50 / 60 Hz (Continental Europe)
41 ˚F – 95 ˚F (5 ˚C – 35 ˚C)
Operating Temperature
14 ˚F – 140 ˚F (-10 ˚C – 60 ˚C)
Storage Temperature
Remote Control
Power Source
Operating Range
Dimensions
:
:
:
:
AAA, SUM-04 or R03 type x 2
16.4’ (5m) / 30˚
2.0”(W) x 0.91”(H) x 4.8”(D) (51.5mm x 23.2mm x 123mm)
2.11oz (60 g) (including battery)
Net Weight
Owner’s Manual
AC Power Cord
Accessories
Remote Control and Battery
Presentation Remote Control and Battery
Presentation Remote Receiver
VGA Cable
Carrying Bag
Lens Cover
String for Lens Cover
– The specifications are subject to change without notice.
– LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Configuration of Terminals
COMPUTER INPUT TERMINAL (ANALOG)
Terminal : HDB15-PIN
1
2
3
4
5
6
7
8
R / Cr, Pr Input
G / Y Input
B / Cb, Pb Input
No Connect
9
No Connect
Pin Configuration
10 Ground (Vert.sync.)
11 Ground
12 No Connect
2
1
5
4
3
10
9
8
7
6
15
14
13
12
11
Ground (Horiz.sync.) 13 Horiz. sync.
Ground (Red)
Ground (Green)
Ground (Blue)
14 Vert. sync.
15 No Connect
CONTROL PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Pin Configuration
PS/2
-----
-----
-----
GND
-----
-----
-----
-----
Serial
R X D
-----
-----
GND
-----
T X D
-----
ADB
-----
-----
-----
GND
-----
-----
-----
-----
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
-----
USB CONNECTOR (Series B)
Pin Configuration
1
2
3
4
Vcc
- Data
+ Data
Ground
2
3
1
4
Optional Parts
The parts listed below are optionally supplied. When ordering those parts, give name and Type No. of it to the sales dealer.
• COMPONENT-VGA Cable
• SCART-VGA Cable
• MAC Adapter
Type No. : POA-CA-COMPVGA
Type No. : POA-CA-SCART
Type No. : POA-MACAP
51
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
BOXLIGHT CORPORATION (“BOXLIGHT”) warrants that each BOXLIGHT SP-10t (“the Product”) sold hereunder will
conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply
only to the first person or entity that purchases the Product for personal or business use and not for the purpose of
distribution resale. Said warranty shall continue for a period of two (2) years from the date of such purchase.
BOXLIGHT does not warrant that the Product will meet the specific requirements of the first person or entity that
purchases the Product for personal or business use. Lamp is warrantied for 120 days. Accessories are warrantied for
1 year from date of purchase.
BOXLIGHT CORPORATION’s liability for the breach of the foregoing limited warranty is limited to the repair or
replacement of the Product or refund of the purchase price of the Product, at BOXLIGHT’s sole option. To exercise
the Purchaser’s rights under the foregoing warranty, the Product must be returned at the Purchaser’s sole cost and
expense, to BOXLIGHT or any authorized service center provided, however, that the Product must be accompanied by
a written letter explaining the problem and which includes (i) proof of purchase; (ii) the dealer’s name; (iii) the model
and serial number of the Product. A return authorization number, issued by the BOXLIGHT customer service
department, must also be clearly displayed on the outside of the shipping carton containing the Product.
WARRANTY LIMITATION AND EXCLUSION
BOXLIGHT CORPORATION shall have no further obligation under the foregoing limited warranty if the Product has
been damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress (unusual physical and
electrical stress includes unusually long operation, exposure to smoke and other airborne contaminants), unauthorized
modification, tampering, alterations, or service other than by BOXLIGHT or its authorized agents, causes other than
from ordinary use or failure to properly use the Product in the application for which said Product is intended.
DISCLAIMER OR UNSTATED WARRANTIES
The warranty printed above is the only warranty applicable to this purchase.
All other warranties express or implied, including, but not limited to, the implied warranties or merchantability and
fitness for a particular purpose are disclaimed. There are no warranties that extend beyond the face hereof and the
foregoing warranty shall not be extended, altered or varied except by written instrument signed by BOXLIGHT
CORPORATION.
LIMITATION OF LIABILITY
It is understood and agreed that BOXLIGHT’s liability whether in contract, in tort, under any warranty, in negligence or
otherwise shall not exceed the return of the amount of the purchase price paid by purchaser and under no
circumstances shall BOXLIGHT be liable for special, indirect or consequential damages. The price stated for the
Product is a consideration in limiting BOXLIGHT’s liability. No action regardless of form, arising out of the agreement
to purchase the product, may be brought by purchaser more than one year after the cause of action has accrued.
Boxlight
19332 Powder Hill Place
Poulsbo, WA 98370-7407 USA
USA and Canada 800-762-5757
International 360-779-7901
Printed in Japan
Part No.610 312 4698 (1AA6P1P4440-- MP3E)
Download from Www.Somanuals.com. All Manuals Search And Download.
|