Beko Air Conditioner LG BKE4500 D LG BKE5505 D User Manual

Room Air Conditioner  
OWNER'S MANUAL  
Models :  
LG-BKE 4450 D - LG-BKE 5455 D  
LG-BKE 4500 D - LG-BKE 5505 D  
LG-BKE 4600 D - LG-BKE 5605 D  
LG-BKE 4700 D - LG-BKE 4800 D  
• Please read carefully and thoroughly this  
manual before operating this unit.  
• Contact the authorized SVC man for repair or  
maintenance of this unit.  
• Contact the installer for installation of this unit.  
• The appliance is not intended for use by young  
children or infirm persons without supervision.  
• Young children should be supervised to ensure  
that they do not play with the appliance.  
Prior to installation, this air-conditioning  
unit must be submitted for approval by the  
utility service which provides electricity  
(EN 6055-3 Norm).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
Contact the authorized Service technician for repair or maintenance of this unit.  
Contact the installer for installation of this unit.  
The air conditioner is not intended for use by young children or infirm persons  
without supervision.  
Young children should be supervised to ensure that they do not play with the air  
conditioner.  
CAUTION  
CAUTION  
When the air filter is to be  
removed, do not touch the  
metal parts of the indoor unit.  
Do not clean the air  
conditioner with water.  
Ventilate well when used  
together with a stove, etc.  
It may cause an injury.  
Water may enter the unit and  
degrade the insulation. It may  
cause an electric shock.  
An oxygen shortage may  
occur.  
Should be disconnected from  
supply  
When the unit is to be  
cleaned, switch off, and turn  
off the circuit breaker.  
Do not put a pet or house  
plant where it will be  
exposed to direct air flow.  
Do not leave on installation  
stand which is damaged.  
The unit may drop or fall  
down and cause an injury.  
Since the fan rotates at high  
speed during operation, it  
may cause an injury.  
This could injure the pet or  
plant.  
Do not apply an insecticide  
or flammable spray.  
Do not put a stove, etc.  
where is exposed to direct  
air flow.  
Do not step on the  
indoor/outdoor unit and do  
not put anything on it.  
It may cause a fire or  
deformation of the cabinet.  
It may affect combustion.  
It may cause an injury  
through dropping or falling  
down.  
Do not insert hands through  
vanes when the air conditioner  
is operationg  
When the unit is not going to  
be used for a long time, turn  
off the circuit breaker.  
Do not step onto an unstable  
bench when cleaning and/or  
maintaining the unit.  
It will cause an injury by the  
rotating blower.  
If not, dirt may collect and  
cause a fire.  
It may cause an injury, etc.  
by falling down.  
Do not use for special  
purposes.  
Do not operate for a long time in  
high humidity, e.g. leaving a  
door or window open.  
Do not use this air conditioner  
to preserve precision devices,  
food, animal, plants, and art  
objects.  
It may cause deterioration of  
quality, etc.  
In the cooling mode, if it is  
operated in a room with high  
humidity (80%RH or more) for  
a long time, water condensed  
in the air conditioner may drop  
and may wet and spoil  
furniture, etc.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pre p a ra t io n b e fo re o p e ra t io n  
How to Insert the Batteries  
Remove the battery cover by pulling it according to the  
arrow direction.  
Insert new batteries making sure that the (+) and (-) of  
battery are installed correctly.  
Reattach the cover by sliding it back into position.  
NOTES:  
• Use 2 AAA(1.5volt) batteries. Do not use rechargeable  
batteries.  
Storage and Tips For Using the Remote Control  
The remote control may be stored mounted on a  
wall.  
To operate the room air conditioner, aim the  
remote control at the signal receptor.  
Signal Receptor  
Receives the signals from the remote controller.  
(Signal receiving sound:two short beeps or one long beep.)  
Operation Indication Lamps  
On/Off  
: Lights up during the system operation.  
OFF Timer :Lights up during indoor unit operation.  
ON  
Indoor Unit :Lights up during indoor unit operation.  
Operation  
Defrost Mode : Lights up during Defrost Mode or Hot Start operation.  
(Heat pump model only)  
Signal  
receptor  
Operation indication lamps  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ab o u t t h e re m o t e co n t ro l o n t h e syst e m  
Features of the Remote Control  
OPERATION DISPLAY  
Displays the operation conditions.  
Remote Controller  
1
Signal transmitter  
AIRFLOW DIRECTION START/STOP  
2
BUTTON  
Transmits the signals to the room air  
conditioner.  
Used to stop or start louver movement and  
set the desired up/down airflow direction.  
OPERATION MODE SELECTION  
BUTTON  
Used to select the operation mode.  
3
TEMP.  
OFF TIMER BUTTON  
Used to set the time of stopping operation.  
1
4
OFF  
TIME hr.  
START/STOP BUTTON  
5
Operation starts when this button is  
pressed, and stops when the button is  
pressed again.  
3
4
2
8
7
ROOM TEMPERATURE SETTING  
BUTTONS  
6
7
5
6
INDOOR FAN SPEED SELECTION  
BUTTON  
JET COOL  
Used to start or stop the speed cooling.  
(Speed cooling operates super high fan  
speed in cooling mode.)  
8
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation Mode Selection button  
Features of the Remote Control  
(1) OPERATION MODE  
Cooling Operation  
Cooling Operation  
Healthy Dehumidifacation Operation  
Healthy Dehumidifacation Operation  
Heating Operation  
(Cooling Model)  
(Heat pump Model)  
(2) OPERATION PROCEDURE  
Start/Stop Button  
1st  
TEMP.  
Operation Mode Selection  
Button  
2
4
2nd  
3rd  
4th  
1
Room Temperature  
Setting Button  
3
Indoor Fan Speed  
Selection Button  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cooling Operation  
Press the Start/Stop Button.  
1
Select Cooling Operation.  
Press the Operation Mode Selection Button.  
Each time the button is pressed, the operation mode is shifted in the arrow direction.  
2
TEMP.  
TEMP.  
TEMP.  
Cooling  
Healthy  
Dehumidification  
Heating  
(Heat pump model only)  
TEMP.  
Healthy  
Dehumidification  
Cooling  
Set the temperature lower than the room temperature.  
The temperature can be set within a range of 18°C ~ 30°C  
by 1°C .  
3
4
To raise the temperature  
TEMP.  
To lower the temperature  
Set the fan speed.  
Select the fan speed in four steps-low, medium, high or CHAOS.  
Each time the button is pressed, the fan speed mode is shifted.  
The display shows high fan speed.  
TEMP.  
Natural wind by the CHAOS logic  
For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to  
CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan  
speed according to the CHAOS logic.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Healthy Dehumidification Operation Mode  
This mode dehumidifies without overcooling.  
Press the Start/Stop Button.  
1
Select Healthy Dehumidification Operation.  
2
Press the operation Mode Selection Button.  
Each time the button is pressed, the operation mode is  
shifted in the arrow direction.  
TEMP.  
TEMP.  
Cooling  
Healthy  
Dehumidification  
Heating  
(Heat pump model only)  
TEMP.  
Healthy  
Dehumidification  
Cooling  
You can select the fan speed in four steps-low,  
medium, high, or CHAOS. Each time the button is  
pressed, the fan speed mode is shifted.  
3
During Healthy Dehumidification Operation:  
If you select the dehumidification mode on the operation selection button, the airconditioner starts to  
run the dehumidification function, automatically setting the room temp. and airflow volume to the best  
condition for dehumidification based on the sensed current room temp.  
In this case, however, the setting temp. is not displayed in the remote control and you are not able to  
control the room temp. either.  
During the healthy dehumidification function, the airflow volume is automatically set according to the  
optimization algorithm responding to the current room temp. status and makes the room condition  
healthy and comfortable even in the high humidity season.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Heating Operation(Heat pump model only)  
Press the Start/Stop button.  
The unit will respond with  
a beep.  
1
To select Heating Operation, press the Operation Mode  
Selection button.  
Each time the button is pressed, the operation mode is  
shifted in the direction of the arrow.  
2
TEMP.  
TIMEhr.
TEMP.  
TEMP.  
Cooling  
Healthy  
Dehumidification  
Heating  
(Heat pump model only)  
Set the temperature higher than the room temperature.  
The temperature can be set within a range of 16°C~30°C in  
1°C increments.  
3
4
To raise the temperature  
To lower the temperature  
Set the fan speed again with the door of the  
remote control still closed. You can select  
the fan speed in four stepslow, medium,  
high, or CHAOS. Each time the button is  
pressed, the fan speed mode is shifted.  
OFF Timer control Setting  
OFF TIMER CONTROL SETTING  
Press the OFF Time Button.  
TEMP.  
OFF  
TIME hr.  
1. Press the OFF Time Button.  
2. Check the OFF Time LED of the room air conditioner.  
3. The Timer is programmed by 1 hour each  
pressing the OFF Time button from 1 hour to 7 hours.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Jet Cool Operation  
Press the Start/Stop button.  
The unit will respond with a beep.  
1
Press the Jet Cool button to operate the  
speed cooling mode and the unit will  
operate in super high fan speed on cooling  
mode for 30 minutes.  
2
TEMP.  
hr.  
TIME  
To cancel the Jet Cool mode, press the Jet Cool button  
again or the fan speed button or the room temperature  
setting button and the unit will operate in high fan speed on  
cooling mode.  
3
or  
or  
or  
NOTE:  
During the JET COOL function at any moment, the A/C starts to blow the cool air at  
extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is  
especially used to cool the room temp. in the shortest time in a hot summer.  
In heat pump mode the JET COOL function is not available.  
In order to return to the normal cooling mode from the JET COOL mode, you just press  
either the operation mode selection button, airflow volume selection or temp. setting button  
or the JET COOL button again.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Airflow Direction Procedure  
Airflow Direction Control  
Press the Start/Stop Button.  
(Confirm the unit on operation.)  
1
2
The airflow direction can be adjusted as desired by  
using the remote controller. This is effective when you  
want to cool yourself directly, such as after taking a  
bath.  
Press the Airflow Direction Control  
Button and the vertical louvers swing up  
and down automatically.  
Press again the Airflow Direction  
Control Button to set the vertical louver  
at the desired airflow direction.  
3
Horizontal Airflow Direction Control (Optional)  
Adjust the horizontal airflow direction by manually  
moving the horizontal airflow direction louver by  
hand.  
Caution  
Always use the remote controller to adjust  
the airflow direction. Manually moving the  
vertical airflow direction louver by hand could  
cause operation errors.  
When air conditioner operation is stopped,  
the vertical airflow direction louver will close  
the air outlet vent of room air conditioner.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Forced Operation  
Operation procedures when the remote  
control can't be used.  
The operation will be started if the power  
button is pressed.  
If you want to stop operation, re-press  
the button.  
Power  
button  
Open the front  
panel upward  
Heat pump Model  
Cooling Model  
Room Temp. 24°C  
21°C Room Temp. < 24°C  
Room Temp. < 21°C  
Heating  
Operating mode  
Indoor FAN Speed  
Setting Temperature  
Cooling  
High  
Cooling  
High  
Healthy Dehumidification  
High  
23°C  
High  
22°C  
22°C  
24°C  
Test operation  
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of  
room temperature and resets in 18 minutes.  
During test operation, if remote controller signal is received, the unit operates as remote controller sets.  
If you want to use this operation, open the front panel upward and Press the power button let it be  
pressed for about 3 seconds.  
If you want to stop the operation, re-press the button.  
Auto restart  
In case the power comes on again after a power failure, Auto Restarting Operation is the function to  
operate procedures automatically to the previous operating conditions.  
So there is no need of activating this function by pressing any key or button.  
In the initial mode, the fan operates at a low speed and the compressor starts 2.5~3 minutes later.  
As the compressor starts, the fan speed also resumes its previous setting mode.  
Additionally, in order to cancel auto restart operation press power button let it be pressed for about  
6 seconds. To operate auto restart operation again, press power button for about 6 seconds as well.  
Helpful information  
Fan speed and cooling capacity.  
The cooling capacity indicated in the specification is the  
value when the fan speed is set to high, and the capacity will  
be lower at low or medium fan speed.  
High fan speed is recommended when you wish to cool the  
room quickly.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ca re a n d m a in t e n a n ce o f t h e a ir co n d it io n e r  
CAUTION: Before performing any maintenance, turn off the main power to the system.  
Indoor Unit  
Never use any of the followings:  
Grille, Case, and Remote Control  
Water hotter than 40°C  
Could cause deformation and/or  
discoloration.  
Volatile substances  
Could damage the surfaces of the air  
conditioner.  
Turn the system off before cleaning. To  
clean, wipe with a soft, dry cloth. Do not  
use bleach or abrasives.  
NOTE:  
Supply power must be disconnected before  
cleaning the indoor unit.  
P
o
w
d
e
r
G
a
e
n
s
o
l
i
Air filters  
Air outlet vent  
Air inlet vent  
(behind front panel)  
Vertical louver  
Horizontal louver  
Lift the front access panel and pull the filter tab  
slightly forward to remove the filter.  
AIR FILTERS  
1
2
The air filters behind the front grille should be  
checked and cleaned once every 2 weeks or  
more often if neccessary.  
Clean the filter with a vacuum or warm, soapy  
water.  
If dirt is conspicuous, wash with a  
solution of detergent in lukewarm water.  
If hot water (40°C or more) is used, it  
may be deformed.  
After washing with water, dry well in the  
shade.  
3
4
Re-install the air filter.  
Outdoor Unit  
The heat exchanger coils and panel vents of the  
outdoor unit should be checked regularly. If  
clogged with dirt or soot, the heat exchanger  
and panel vents may be professionally steam  
(Rear)  
(Side)  
cleaned.  
Air intake  
vents  
Piping  
NOTE:  
Drain Hose  
Dirty or clogged coils will reduce the  
operating efficiency of the system  
and cause higher operating costs.  
Air outlet  
vents  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the air conditioner is not going to be used for a long time.  
When air conditioner is not going to be  
When the air conditioner is to be used again.  
used for a long time.  
Clean the air filter and install it in the indoor  
unit.  
Turn off the circuit breaker, and disconnect  
the plug.  
(Refer to page 13 for cleaning filters.)  
CAUTION  
Turn off the circuit breaker when the air conditioner  
is not going to be used for a long time.  
Dirt may collect and may cause a fire.  
Check that the air inlet and outlet of the  
indoor/outdoor unit are not blocked.  
Remove the batteries from the remote  
control.  
Operation Tips  
Do not overcool the room.  
Keep blinds or curtains  
closed.  
Keep the room temperature  
uniform.  
This is not good for the health  
and wastes electricity.  
Do not let direct sunshine enter  
the room when the air  
conditioner is in operation.  
Adjust the vertical and  
horizontal airflow direction to  
ensure a uniform temperature  
in the room.  
Make sure that the doors  
and windows are shut tight.  
Clean the air filter regularly.  
Ventilate the room  
occasionally.  
Blockages in the air filter  
reduce the airflow and lower  
cooling and dehumidifying  
effects. Clean at least once  
every two weeks.  
Since windows are kept closed,  
it is a good idea to open them  
and ventilate the room now and  
then.  
Avoid opening doors and  
windows as much as possible  
to keep the cool air in the room.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be fo re yo u ca ll fo r se rvice ...  
Troubleshooting Tips! Save time and money!  
?
Check the following points before requesting repairs or service.... If the fault persists, please  
contact your dealer or service center.  
Case  
Explanation  
See page  
The air conditioner does not  
operate.  
Have you made a mistake in timer operation?  
Has the fuse blown or has the circuit breaker  
been tripped?  
-
-
The room has a peculiar  
odor.  
Check that this is not a damp smell exuded by  
the walls, carpet, furniture, or cloth items in the  
room.  
It seems that condensation  
is leaking from the air  
conditioner.  
Condensation occurs when the airflow from  
the air conditioner cools the warm room air.  
-
-
Air conditioner does not  
operate for about 3 minutes  
when restarted.  
This is the protector of the mechanism.  
Wait about three minutes and operation will  
begin.  
Does not cool or heat  
effectively.  
Is the air filter dirty? See air filter cleaning  
instructions.  
Has the temperature been set incorrectly?  
Are the indoor unit's air inlet or outlet vents  
obstructed?  
13  
7
-
The air conditioner  
operation is noisy.  
For a noise that sounds like water flowing.  
-This is the sound of freon flowing inside the  
air conditioner unit.  
For a noise that sounds like the compressed  
air releasing into atmosphere.  
-
-This is the sound of the dehumidifying water  
being processed inside the air conditioning  
unit.  
Remote control display is  
faint, or no display at all.  
Are the batteries depleted?  
Are the batteries inserted in the opposite (+)  
and (-) directions?  
4
-
Crack sound is heard.  
This sound is generated by the  
expansion/constriction of the front panel, etc.  
due to changes of temperature.  
NOTE  
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.  
The indoor side is not water resistant and should not be exposed to excess water.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Accell Exercise Bike CARDIO PACER User Manual
ADC Cassette Player RMG User Manual
Airstream Automobile 2007 Safari User Manual
Akai Clock Radio AR215P User Manual
Alpine Network Card PMD DOK2 User Manual
Amana Dishwasher W10254855A User Manual
American Acoustic Development Speaker THE CUB User Manual
American Standard Hot Tub 2425018W User Manual
Audiovox Remote Starter APA 800a User Manual
Axis Communications Security Camera Q6044 C User Manual