BASS PROCESSOR
SONIC EXCITER
BASS PROCESSOR
SONIC EXCITER
SONIC
EXCITER
SX3040
1
2
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
DRIVE
TUNE
MIX
TUNE
HARMONICS
MIX
IN/OUT
IN/OUT
DRIVE
TUNE
MIX
TUNE
HARMONICS
MIX
POWER
User Manual
SONIC EXCITER SX3040
Ultimate Stereo Sound Enhancement Processor
Download from Www.Somanuals.com. All Manuals Search And Download.
3
SONIC EXCITER SX3040 User Manual
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
UNDERTAKING OR REPRESENTATION. THIS MANUAL
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY
BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
Important Safety
Instructions
blade or the third prong are provided for your safety. If the INCLUDING PHOTOCOPYING AND RECORDING OF ANY
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
ALL RIGHTS RESERVED.
© 2012 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands
Terminals marked with this symbol carry
electrical current of sufficient magnitude
to constitute risk of electric shock.
11. Use only attachments/accessories specified by
the manufacturer.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. All other
installation or modification should be performed only
by qualified personnel.
12. Use only with the
cart, stand, tripod, bracket,
or table specified by the
LIMITED WARRANTY
§ 1 Warranty
manufacturer, or sold with (1) This limited warranty is valid only if you purchased
the apparatus. When a cart the product from a MUSIC Group Authorized Reseller in
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the
is used, use caution when
the country of purchase. A list of authorized resellers can
moving the cart/apparatus be found on BEHRINGER’s website behringer.com under
enclosure - voltage that may be sufficient to constitute a
risk of shock.
combination to avoid
“Where to Buy”, or you can contact the MUSIC Group office
closest to you.
injury from tip-over.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
13. Unplug this apparatus during lightning storms or
(2) MUSIC Group* warrants the mechanical and
when unused for long periods of time.
electronic components of this product to be free of defects
in material and workmanship if used under normal
operating conditions for a period of one (1) year from
the original date of purchase (see the Limited Warranty
terms in § 4 below), unless a longer minimum warranty
period is mandated by applicable local laws. If the product
shows any defects within the specified warranty period
and that defect is not excluded under § 4, MUSIC Group
shall, at its discretion, either replace or repair the product
using suitable new or reconditioned product or parts.
In case MUSIC Group decides to replace the entire product,
this limited warranty shall apply to the replacement
product for the remaining initial warranty period, i.e.,
one (1) year (or otherwise applicable minimum warranty
period) from the date of purchase of the original product.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualified personnel.
Caution
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by qualified service personnel only.
(3) Upon validation of the warranty claim, the repaired
or replacement product will be returned to the user
freight prepaid by MUSIC Group.
To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualified
service personnel.
(4) Warranty claims other than those indicated above
are expressly excluded.
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF
OF PURCHASE COVERING YOUR LIMITED WARRANTY.
THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF
OF PURCHASE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND APPEARANCES
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND
ACCURACY IS NOT GUARANTEED. BEHRINGER IS
PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED
BY ANY PERSON WHO RELIES EITHER WHOLLY OR
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT.
MUSIC GROUP PRODUCTS ARE SOLD THROUGH
AUTHORIZED FULLFILLERS AND RESELLERS ONLY.
FULLFILLERS AND RESELLERS ARE NOT AGENTS OF
MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY
TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED
§ 2 Online registration
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
Please do remember to register your new BEHRINGER
equipment right after your purchase at behringer.com
under“Support”and kindly read the terms and conditions
of our limited warranty carefully. Registering your
purchase and equipment with us helps us process
your repair claims quicker and more efficiently.
Thank you for your cooperation!
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
§ 3 Return materials authorization
(1) To obtain warranty service, please contact the
retailer from whom the equipment was purchased.
Should your MUSIC Group Authorized Reseller not be
located in your vicinity, you may contact the MUSIC Group
Authorized Fulfiller for your country listed under
Download from Www.Somanuals.com. All Manuals Search And Download.
4
SONIC EXCITER SX3040 User Manual
“Support”at behringer.com. If your country is not
listed, please check if your problem can be dealt with
by our“Online Support”which may also be found under
“Support”at behringer.com. Alternatively, please submit
an online warranty claim at behringer.com BEFORE
returning the product. All inquiries must be accompanied
by a description of the problem and the serial number
of the product. After verifying the product’s warranty
eligibility with the original sales receipt, MUSIC Group
will then issue a Return Materials Authorization
(“RMA”) number.
•
•
connection or operation of the unit in any way
that does not comply with the technical or safety
regulations applicable in the country where the
product is used;
(3) This warranty does not detract from the seller’s
obligations in regard to any lack of conformity of the
product and any hidden defect.
§ 9 Amendment
damage/defects caused by acts of God/Nature
(accident, fire, flood, etc) or any other condition that
is beyond the control of MUSIC Group.
Warranty service conditions are subject to change without
notice. For the latest warranty terms and conditions
and additional information regarding MUSIC Group’s
limited warranty, please see complete details online at
behringer.com.
(7) Any repair or opening of the unit carried out by
unauthorized personnel (user included) will void the
limited warranty.
* MUSIC Group Macao Commercial Offshore Limited of
Rue de Pequim No. 202-A, Macau Finance Centre 9/J, Macau,
including all MUSIC Group companies
(8) If an inspection of the product by MUSIC Group
shows that the defect in question is not covered by the
limited warranty, the inspection costs are payable by
the customer.
(2) Subsequently, the product must be returned in
its original shipping carton, together with the return
authorization number to the address indicated by
MUSIC Group.
(9) Products which do not meet the terms of this
limited warranty will be repaired exclusively at the buyer’s
expense. MUSIC Group or its authorized service center will
inform the buyer of any such circumstance. If the buyer
fails to submit a written repair order within 6 weeks after
notification, MUSIC Group will return the unit C.O.D. with
a separate invoice for freight and packing. Such costs will
also be invoiced separately when the buyer has sent in a
written repair order.
(3) Shipments without freight prepaid will not
be accepted.
§ 4 Warranty Exclusions
(1) This limited warranty does not cover consumable
parts including, but not limited to, fuses and batteries.
Where applicable, MUSIC Group warrants the valves or
meters contained in the product to be free from defects
in material and workmanship for a period of ninety (90)
days from date of purchase.
(10) MUSIC Group Authorized Resellers do not sell new
products directly in online auctions. Purchases made
through an online auction are on a“buyer beware”basis.
Online auction confirmations or sales receipts are not
accepted for warranty verification and MUSIC Group will
not repair or replace any product purchased through an
online auction.
(2) This limited warranty does not cover the product
if it has been electronically or mechanically modified
in any way. If the product needs to be modified or
adapted in order to comply with applicable technical
or safety standards on a national or local level, in any
country which is not the country for which the
product was originally developed and manufactured,
this modification/adaptation shall not be considered a
defect in materials or workmanship. This limited warranty
does not cover any such modification/adaptation,
regardless of whether it was carried out properly or not.
Under the terms of this limited warranty, MUSIC Group
shall not be held responsible for any cost resulting from
such a modification/adaptation.
§ 5 Warranty transferability
This limited warranty is extended exclusively to the
original buyer (customer of authorized reseller) and is
not transferable to anyone who may subsequently
purchase this product. No other person (reseller, etc.)
shall be entitled to give any warranty promise on behalf
of MUSIC Group.
(3) This limited warranty covers only the product
hardware. It does not cover technical assistance for
hardware or software usage and it does not cover
any software products whether or not contained in
the product. Any such software is provided“AS IS”
unless expressly provided for in any enclosed software
limited warranty.
§ 6 Claim for damage
Subject only to the operation of mandatory applicable
local laws, MUSIC Group shall have no liability to the buyer
under this warranty for any consequential or indirect
loss or damage of any kind. In no event shall the liability
of MUSIC Group under this limited warranty exceed the
invoiced value of the product.
(4) This limited warranty is invalid if the
factory-applied serial number has been altered or
removed from the product.
§ 7 Limitation of liability
This limited warranty is the complete and exclusive
warranty between you and MUSIC Group. It supersedes
all other written or oral communications related to this
product. MUSIC Group provides no other warranties for
this product.
(5) Free inspections and maintenance/repair work
are expressly excluded from this limited warranty,
in particular, if caused by improper handling of the
product by the user. This also applies to defects caused
by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, guitar strings,
illuminants and similar parts.
§ 8 Other warranty rights and
national law
(1) This limited warranty does not exclude or limit the
buyer’s statutory rights as a consumer in any way.
(6) Damage/defects caused by the following conditions
are not covered by this limited warranty:
(2) The limited warranty regulations mentioned herein
are applicable unless they constitute an infringement of
applicable mandatory local laws.
•
improper handling, neglect or failure to operate the
unit in compliance with the instructions given in
BEHRINGER user or service manuals;
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SONIC EXCITER SX3040 User Manual
1. Introduction
1.1.2 Initial operation
Often used in the past to compensate for the inadequacies of analogue
technology, the exciter in today’s Digital Age is a secret weapon of sound
engineers for generating contemporary productions that truly stand out. You can
now experience this exciting circuit with the SX3040. The unit works with two
independent channels, so you can selectively process stereo or two mono signals
separately from each other.
Ensure adequate air supply and to avoid overheating do not place the unit near
radiators etc.
◊
Blown fuses must be replaced by fuses of the correct rating!
Please refer to the “SPECIFICATIONS” section for the applicable rating.
For connection to the mains use the enclosed power cord with cold connector
which complies with the relevant safety regulations.
Whether you purchased the SX3040 for your studio, live sound or the stage,
the unit’s sound qualities are so impressive that you’ll never again want to do
without this sound enhancer when mixing. We at BEHRINGER hope you enjoy
your new acquisition.
◊
Please make sure that all devices are properly grounded/earthed.
For your own safety, never remove or disable the ground/earth
conductors from the devices or on the power cords. The unit
must always be connected to the mains outlet with a protective
grounding connection.
1.1 Before you get started
◊
The tone quality may diminish within the range of powerful radio
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the unit, and use shielded cables
for all connections.
1.1.1 Shipment
Your product was carefully packed at the factory to ensure safe transport.
Nevertheless, if the box is damaged inspect the unit immediately for signs
of damage.
1.1.3 Online registration
◊
If the unit is damaged please do NOT return it to us, but notify your
dealer and the shipping company immediately; otherwise, claims for
damage or replacement may not be granted.
Please register your new BEHRINGER equipment right after your purchase
warranty carefully.
◊
◊
◊
◊
We recommend that you use a flight case to give the unit optimum
protection during use or transport.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Otherwise, always use the original box to prevent damage during
storage or transport.
Make sure that children cannot play unsupervised with the unit or
its packaging.
Please ensure proper disposal of all packing materials.
Recylce whenever possible.
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!
2. Control elements and Connections
2.1 Front panel
The control elements for CHANNEL 1 and CHANNEL 2 are identical.
In the following paragraphs the functions are described using CHANNEL 1 as an example.
BASS PROCESSOR
SONIC EXCITER
BASS PROCESSOR
SONIC EXCITER
SONIC
EXCITER
SX3040
1
2
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
DRIVE
TUNE
MIX
TUNE
HARMONICS
MIX
IN/OUT
IN/OUT
DRIVE
TUNE
MIX
TUNE
HARMONICS
MIX
POWER
(1)
(2)
(3)
(4)
(5) (6) (7)
(8)
Fig. 2.1: Control elements on the front panel
BASS PROCESSOR
(2) TUNE: This control selects an upper cut-off frequency for bass processing.
The control range is from 50 Hz (MIN) to 160 Hz (MAX).
(1) DRIVE: This control adjusts the intensity for bass processing. The optimal
working point is set when the green LED lights up regularly as loud bass
signal peaks occur. The longer the LED lights up, the longer the duration
of the bass signal at peak levels (Sustain), leading to a tighter and more
voluminous bass.
(3) MIX: This control defines the portion of the processed bass signal that
should be mixed with the original signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
SONIC EXCITER SX3040 User Manual
SONIC EXCITER
(8) POWER: Use the POWER switch to put the unit into operation. The POWER
switch should be in the “Off” position when you connect the unit to the
power feed (mains).
(4) TUNE: Sets the cut-off frequency at which the harmonic exciter starts
working. The control range is from 1.3 kHz (MIN) to 10 kHz (MAX).
To disconnect the unit from the mains, pull out the power plug.
When switching on the unit ensure that the power plug is easily accessible.
To mount the unit in a rack ensure that the unit can easily be disconnected
from the mains by means of a plug or an all-pole mains switch on the
back side.
(5) HARMONICS: This control is used to set the number of harmonics that
should be added to the signal. This parameter has a direct influence on the
detail reproduction and the quality of the sound. Use the “MIN” setting for
critical signals, e.g. voice, and “MAX” for extreme processing, e.g. for drums.
(6) MIX: Defines the portion of the harmonic exciter signal that should be mixed
◊
Please note: Switching the POWER switch off does not disconnect the
unit completely from the mains. For this reason you should unplug the
power cord if the unit is not going to be used for prolonged periods
of time.
with the original signal.
(7) IN/OUT: Activates and deactivates signal processing. The LED lights up in the
active operating mode.
2.2 Rear panel
(10)
ALL INPUTS
&
OUTPUTS
ALL INPUTS OUTPUTS
&
FULLY BALANCED
FULLY BALANCED
/
/
TIP PIN
2
TIP PIN
2
/
/
RING PIN
3
RING PIN
3
/
/
SLEEVE PIN
1
SLEEVE PIN
1
(9)
Fig. 2.2: Control elements on the rear panel
(11)
(9) FUSE HOLDER / IEC POWER SOCKET: The mains connection is made via
3.1 Two separate unit functions
an IEC main socket. It complies with relevant safety regulations. A suitable
power cord is included. Replace the fuse with a fuse of the same type.
The SX3040 has two different processing sections for each channel: a BASS
PROCESSOR and a HARMONIC EXCITER. The advantage is that the output level
is not changed with SX3040 processing. Hence, overloading of loudspeakers
and other devices is avoided. Moreover, the sound modification is not static,
but dynamic and adapts automatically to different signals.
(10) OUTPUTS 1: Balanced XLR sockets and ¼" jacks. These are used to connect
amplifiers as well as further signal processors and recording devices.
The jacks and XLR sockets can be used in parallel when two outputs
are required.
The BASS PROCESSOR works like a frequency-selective compressor. Depending on
the signal dynamics, an adjustable frequency range is compressed, shifted in
phase and mixed with the original signal. During the compression, peak levels
are temporally extended and hence perceived to be more intense. The phase shift
enhances the bass similarly to a chorus effect.
(11) INPUTS 1: Balanced XLR sockets and ¼" jacks. These are used to connect
line-level signal sources (e.g. a mixing console). To avoid interference,
use only the jacks or the XLR sockets, not both at once.
SERIAL NUMBER: The serial number can be found on the back right side of
the unit. It is needed for online registration.
Exciter-enhanced sound has been a significant part of high-quality commercial
productions for decades. The HARMONIC EXCITER enhances the audio material
with additional harmonics in dependence of frequency. In instruments the
harmonic structure determines the character of the sound as well as the presence
and hence the punch. The more harmonics an exciter adds to the original signal
and the higher their levels, the more pronounced the signal character.
3. Practical Application
The SX3040 is classified as a psychoacoustic processor. These devices improve
sound with sophisticated signal modifications which are subjectively perceived
as clearer and more sonically pleasing. Algorithms based on the human sense of
hearing influence the quality and the time-based progression of the audio signals
without changing the level ratio. The sound is thereby perceived to be more
contoured and voluminous. Use the SX3040 for mastering in the studio, for live
sound to improve the reproduction quality of PA systems, as a link between
instruments and amplifiers or between playback and recording devices for
restoring old recordings.
3.2 Application examples
The SX3040 can be incorporated into a set-up in two different ways:
•
•
Series cable connection
Parallel cable connection
In the following sections the two variants are described in greater detail.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
SONIC EXCITER SX3040 User Manual
3.2.1 Series cable connection (Insert mode)
B1220 PRO
B1220 PRO
The simplest form of series connection consists of a signal chain in which several
devices are connected in a row, e.g. keyboard effects unit (SX3040)
amplifier. An input signal is fed into the effects unit (SX3040) and a mixed signal
consisting of an input signal and a processed effect signal is sent to an amplifier
or a recording device (MD recorder, computer etc.) for reproduction.
Another type of series connection can be made by using the Insert point of a
mixing console or instrument amplifier. In this configuration the signal is sent
out from the mixer channel via a special Y-lead and a mixed signal (dry and
effect signals) is routed from the outputs of the effects unit (SX3040) back to the
mixer channel.
EP2000
Outputs 1
◊
With series connection the dry/wet mix is set with the MIX controls on
the effects unit (SX3040).
Outputs 2
SONIC EXCITER
BASS PROCESSOR
SONIC EXCITER
BASS PROCESSOR
SONIC
EXCITER
SX3040
1
2
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
DRIVE
TUNE
TUNE
HARMONICS
IN/OUT
IN/OUT
DRIVE
TUNE
TUNE
HARMONICS
POWER
3.2.2 Parallel cable connection (Aux Send Mode)
SX3040
Inputs 1
Inputs 2
Parallel connection can be made via the Aux path of a mixing console. A parallel
decoupled pure effect signal from the effects unit is mixed with the unmodified
dry signal via this separate effects bus. Mixing of dry and effect signals occurs on
the mixing console.
XM8500
◊
With parallel connection the portion of the effect signal that should be
added to the original signal is defined with the Aux Return controls on
the mixing console. The MIX control on the effects unit (SX3040) must
be set to “MAX” for this.
Keyboard
3.2.3 Live sound
The SX3040 is ideally suited for use with live sound systems in clubs, discos,
live concerts and public performances. Here the unit not only can considerably
improve the signal quality, but also can compensate for the inadequacies of small
or weak PA systems.
For this application the unit is ideally employed between the mixing console mix
output and the amplifier input. If a graphic equalizer is also used, it should be
positioned after the SX3040.
Channels 1 and 2 must have the same setting since this application involves
stereo processing. Otherwise, the original stereo image will be distorted.
1622USB
◊
With the MIX controls you define the portion of the processed signal
that should be mixed with the original signal separately for the BASS
PROCESSOR and SONIC EXCITER sections.
Fig. 3.1: Use of the SX3040 with live sound systems
Download from Www.Somanuals.com. All Manuals Search And Download.
8
SONIC EXCITER SX3040 User Manual
3.2.4 Studio application
3.2.5 Stage operation with instrument amplifiers
In a studio environment the SONIC EXCITER is ideal for mastering to enhance the
sound of recordings. The SX3040 can lend your music the professional polish of
high-quality productions in just a few steps. Even if you primarily work with a
digital audio workstation, you can perform the final mastering with the SX3040
and an external recorder.
Besides being ideal for use with stereo signals, the SONIC EXCITER is also suitable
for use with one or two individual signals, e. g. guitars. With electric guitars it can
be used in combination with a combo amp or a separate modelling processor-
amplifier combination to give the guitar sound more presence, fullness and
punch. A similar combination with a keyboard and an external amplifier
is possible.
For this application connect the SX3040 before the mastering recorder.
Channels 1 and 2 must have the same settings, as this application involves stereo Because the two channels of the SX3040 work independently, even two different
processing. Otherwise, the original stereo image will be distorted.
mono signals can be processed.
◊
With the MIX controls you define the portion of the processed signal
that should be mixed with the original signal separately for the BASS
PROCESSOR and SONIC EXCITER sections.
Connect the SX3040 to the effects loop connections on your combo amplifier.
Determine whether the effects loop connections on your amplifier work in
series in Insert mode or in parallel in Aux Send mode. Then set the MIX controls
accordingly (see sections 3.2.1 and 3.2.2). If in doubt, refer to the instruction
manual for your amplifier.
If you are using a modelling processor, you must connect the processor output to
the SX3040 input and route the SX3040 signal to the amplifier.
Md Recorder
BASS PROCESSOR
SONIC EXCITER
BASS PROCESSOR
SONIC EXCITER
SONIC
EXCITER
SX3040
1
2
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
DRIVE
TUNE
TUNE
HARMONICS
IN/OUT
IN/OUT
DRIVE
TUNE
TUNE
HARMONICS
POWER
SX3040
Electric Guitar
Bass Guitar
Computer
Return
Send
V-AMP PRO
FCA202
XM8500
GMX212
Inputs 1
Outputs 1
Inputs 2
SONIC EXCITER
BASS PROCESSOR
SONIC EXCITER
BASS PROCESSOR
Keyboard
SONIC
EXCITER
SX3040
1
2
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
MIN
MAX
MIN
MAX
MIN
MAX
MIX
DRIVE
TUNE
TUNE
HARMONICS
IN/OUT
IN/OUT
DRIVE
TUNE
TUNE
HARMONICS
POWER
SX3040
Outputs 2
BXL3000A
1622USB
Fig. 3.3: The SX3040 in use with guitar amplifiers
Fig. 3.2: The SX3040 in Studio mode
Download from Www.Somanuals.com. All Manuals Search And Download.
9
SONIC EXCITER SX3040 User Manual
3.3 Basic operation
Due to the small number of SX3040 controls, this is an easy processor to operate.
Perform the following steps:
1) Connect the unit according to the application as described in section 3.2.
◊
First make the following settings for one channel (channel 1 or 2
depending on input assignment). For stereo applications choose the
same settings for the second channel.
2) Switch on all devices (amplifier and loudspeaker last) and ensure that the
IN/OUT switch (7) on the SX3040 is illuminated, i.e. that the unit is working
and all controls are set to “MIN”. For series connection set the MIX controls to
the middle positions; for parallel connection set them to “MAX” (see sections
3.2.1 and 3.2.2).
Fig. 4.1: Unbalanced jack cable with ¼" TS jack plugs
3) Turn the DRIVE control (1) until the desired bass saturation effect is
achieved and the green LED regularly lights up when peak levels occur.
If your other equipment has balanced inputs, use a balanced switched cable
with two stereo jack plugs at the balanced outputs of the SX3040. These cables
provide a high level of security against interference signals such as noise
interference from power cables, and should be used for all long cable routes.
4) Turn the TUNE control (2) to specify the frequency range for processing.
5) Turn the HARMONICS control (5) until the desired enhancement effect in
the high-frequency range is achieved.
6) Turn the TUNE control (4) to specify the frequency range for processing.
7) To compare the original and processed signals, repeatedly press the IN/OUT
button. Then adjust the dry/wet balance as desired.
8) Repeat steps 3) to 7) until you are satisfied with the result.
4. Installation
4.1 Rack mounting
The BEHRINGER SONIC EXCITER SX3040 requires 1 U of height for installation
in a 19-inch rack. Please make sure that you leave around 10 cm for the rear
connections. For installation of the unit in a rack please use M6 machine screws
and nuts.
4.2 Audio connections
Fig. 4.2: Balanced jack cable with ¼" TRS jack plugs
There are various ways to integrate the SX3040 into your setup. Depending on
the application you will need different connecting cables, and these will be
discussed in the following section.
Alternatively, you can use professional XLR cables with an XLR socket on one side
and an XLR plug on the other side. This cable connection is the most reliable both
electrically and mechanically.
4.2.1 Cabling with jack cables
To operate the SX3040 in series with other equipment, you will need standard
commercial ¼" jack cables, often referred to as instrument cables or patch cables.
These cables have a ¼" TS jack plug at each end. Connect the inputs of the
equipment with the corresponding outputs of each of the other devices.
Fig. 4.3: Balanced XLR plug
Download from Www.Somanuals.com. All Manuals Search And Download.
10 SONIC EXCITER SX3040 User Manual
4.2.2 Connection with insert cables
5. Specifications
Use standard ¼" insert cables to connect the SONIC EXCITER to the insert path of
a mixing console. These Y cables have two ¼" TS connectors at one end, and one
¼" TRS connector at the other. Connect the plug marked “Send” to the INPUT
L jack on the effects unit. Connect the “Return” plug to the OUTPUT L jack on
the device. Connect the TRS connector to the insert jack of the channel strip on
the mixing console. Use two insert cables for stereo sub-groups and main-mix
inserts. The second cable must be connected to the INPUT/OUTPUT R jacks of
the SX3040.
Inputs
Connections
XLR sockets and ¼" stereo jacks
Type
Balanced
Input impedance
Nominal input level
Maximum input level
20 kΩ balanced, 10 kΩ unbalanced
+4 dBu
+22 dBu
Outputs
Connections
XLR sockets and ¼" stereo jacks
Servo-balanced
Type
Output impedance
Maximum output level
60 Ω balanced, 60 Ω unbalanced
+22 dBu
Bass Processor
Type
Frequency-selective compressor with
phase shifter
Filter cut-off frequency
50 Hz to 160 Hz
Sonic Exciter
Type
Harmonic exciter
1.3 kHz to 10 kHz
Filter cut-off frequency
System Data
Fig. 4.4: Insert cable with one ¼" TRS (tip-ring-sleeve) jack plug on one end andtwo ¼" TS
(tip-sleevel) jack plugs on the other end
Frequency response
Signal-to-noise ratio
Distortion (THD + N)
Crosstalk
10 Hz to 120 kHz, 3 dB
>90 dB, unweighted, 20 Hz to 20 kHz
0.005 % typ. @ +4 dBu, 1 kHz (IN)
>90 dB
Power Supply
Mains Voltage
USA/Canada
China/Korea
Europe/UK/Australia
Japan
120 V AC, 60 Hz
220 V AC, 50/60 Hz
230 V AC, 50 Hz
100 V AC, 50-60 Hz
120/230 V AC, 50-60 Hz
approx. 12 W
Export model
Power consumption
Fuse
100-120 V AC: T 250 mA, H 250 V
220-240 V AC: T 125 mA, H 250 V
Download from Www.Somanuals.com. All Manuals Search And Download.
11 SONIC EXCITER SX3040 User Manual
Dimensions/Weight
Dimensions (H x W x D)
Weight
approx. 8.54 x 1.8 x 19"
approx. 217 x 44.5 x 483 mm
approx. 5.1 lbs / 2.30 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
Download from Www.Somanuals.com. All Manuals Search And Download.
We Hear You
Download from Www.Somanuals.com. All Manuals Search And Download.
|