User’s manual
Version 1.0 March 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
TRUTH
High-Performance Active 360-Watt Studio Subwoofer for Mono, Stereo and Surround
Applications
s High-power 360-Watt amplifier delivers extreme dynamic range, with linear bass reproduction down to 32 Hz
s 2 long-excursion 8'' loudspeakers with deformation-resistant aluminum die-cast chassis for minimal distortion
even at highest volume levels
s Dedicated Left, Right and Center XLR inputs and outputs for all stereo and surround applications
s Incredible low-frequency enhancement for BEHRINGER TRUTH studio monitors or any other professional
monitoring system
s Innovative band-pass filter enclosure design yields excellent dynamic response and linearity
s Active crossovers at 80 Hz provide precise frequency band separation and minimal phase shift
s Overload-protection circuitry ensures optimal speaker protection
s Flexible adaptation to virtually every acoustic environment via Phase and Room Compensation controls
s Footswitch connector for remotely controllable A/B comparison (footswitch not included)
s High-performance toroidal transformer for highest power handling and lowest noise
s High-quality components and exceptionally rugged construction ensure long life
s Conceived and designed by BEHRINGER Germany
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
FOREWORD
TABLE OF CONTENTS
Dear customer,
1. INTRODUCTION ......................................................... 4
welcome to the team of
BEHRINGER users, and
thank you very much for
expressing your confi-
dence in us by pur-
chasing this studio
subwoofer.
1.1 Before you get started ................................................... 5
1.1.1 Shipment ............................................................... 5
1.1.2 Initial operation...................................................... 5
1.1.3 Online registration ................................................ 5
2. CONTROL ELEMENTS AND CONNECTIONS ............. 5
Writing this foreword
for you gives me great
pleasure, because it
represents the cul-
mination of many months
of hard work delivered
by our engineering team
3. APPLICATIONS .......................................................... 6
3.1 Connection ...................................................................... 6
3.1.1 Stereo setup with subwoofer ............................. 6
3.1.2 Multichannel surround setup ............................... 7
3.2 Input signal level adjustment .......................................... 7
3.3 Correct placement .......................................................... 7
3.3.1 Adjusting room compensation ............................. 8
3.3.2 Phase adjustment ................................................. 8
to achieve
ambitious goal: to
present compact
a
very
a
subwoofer that perfectly
complements every loud-
4. AUDIO CONNECTIONS ............................................... 8
5. SPECIFICATIONS ....................................................... 9
6. WARRANTY ..............................................................10
speaker system with its enormous acoustic pressure and well-
defined reproduction of the lowest frequencies. The task of
designing our new TRUTH B2092A certainly meant a great deal
of responsibility, which we assumed by focusing on you, the
discerning user and musician. Meeting your expectations also
meant a lot of work and night shifts. But it was fun, too. Developing
a product usually brings a lot of people together, and what a
great feeling it is when all who participated in such a project can
be proud of what they’ve achieved.
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER team.
With your highly competent suggestions for new products you’ve
made a significant contribution to shaping our company and making
it successful. In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
reasonable price. All of this will enable you to give free rein to
your creativity without being hampered by budget constraints.
1. INTRODUCTION
Congratulations! By purchasing the TRUTH B2092A, you have
obtained a powerful active subwoofer that effectively expands
the transmission range of your stereo or surround system. You
now own a tool that lets you reproduce the deepest bass
frequencies with outstanding clarity.
We are often asked how we manage to produce such high-
quality devices at such unbelievably low prices. The answer is
quite simple: it’s you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etc. Isn’t it only fair to pass this benefit on
to you? Because we know that your success is our success
too!
The TRUTH B2092A is a compact subwoofer capable of
reproducing bass frequencies down to 32 Hz. The band pass
enclosure design with two long-stroke 8" loudspeakers
guarantees the highest signal level with the lowest non-linear
distortion possible. The integrated electronics include active
crossovers, an overload-protection circuit and a powerful
360-Watt amplifier that delivers clearly defined bass even at
high volumes. The B2092A features 3 signal inputs and outputs
(left/center/right) as well as a separate subwoofer input. They
assure flexible connectivity options for existing monitoring
systems, regardless of whether they are in stereo or surround
sound. The input sensitivity can be adjusted; and you can optimally
adjust the B2092A to the main speakers and the acoustic
surroundings by using the multistage room and phase
compensation.
I would like to thank all of you who have made the TRUTH
possible. You have all made your own personal contributions,
from the developers to the many other employees at this company,
and to you, the BEHRINGER user.
My friends, it’s been worth the effort!
Thank you very much,
+
The following user’s manual is intended to
familiarize you with the unit’s control elements,
so that you can master all the functions. After having
thoroughly read the user’s manual, store it in a safe
place for future reference.
Uli Behringer
ATTENTION!
+
The B2092A is capable of producing extreme
volumes. Please bear in mind that high sound
pressures do not only temporarily damage your
hearing, but can also cause permanent damage.
Always make sure to select an appropriate volume.
4
1. INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
1.1.3 Online registration
1.1 Before you get started
Please do remember to register your new BEHRINGER equipment
conditions of our warranty carefully.
1.1.1 Shipment
Your B2092A was carefully packed in the factory to guarantee
safe transport. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of physical
damage that may have occurred during transit.
Should your BEHRINGER product malfunction, our goal is to have
it repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was
purchased. Should your BEHRINGER dealer not be located in
your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
+
If the unit is damaged, please do NOT return it to us;
instead, notify your dealer and the shipping
company immediately, otherwise claims for damage
or replacement may not be granted.
+
To assure optimal protection of your B2092A during
use or transport, we recommend utilizing a carrying
case.
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
+
+
+
Please always use the original packaging to avoid
damage due to storage or shipping.
Thank you for your cooperation!
Never let unsupervised children play with the
B2092A or with its packaging.
2. CONTROL ELEMENTS AND
CONNECTIONS
Please dispose of all packaging materials in an
environmentally friendly fashion.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation,
and never place the B2092A on top of an amplifier or in the
vicinity of a heater to avoid the risk of overheating.
+
Before plugging the unit into a power socket, please
make sure you have selected the correct voltage!
The fuse compartment near the power plug socket contains
three triangular markings. Two of these triangles are opposite
one another. The voltage indicated adjacent to these markings is
the voltage to which your unit has been set up, and can be
altered by rotating the fuse compartment by 180°. ATTENTION:
This does not apply to export models that were
manufactured only for use with 120 V, for example!
+
If you alter the unit’s voltage, you must change the
fuse accordingly. The correct value of the fuse needed
can be found in the chapter “SPECIFICATIONS.”
+
Faulty fuses must be replaced with fuses of
appropriate rating without exception! The correct
value of the fuses needed can be found in the
chapter “SPECIFICATIONS.”
Fig. 2.1: Control elements in the back
The LIMIT LED lights up as soon as one of the built-in
overload circuits becomes engaged. If the B2092A is muted
using a footswitch, this LED is permanently lit.
Power is delivered via the cable enclosed with the unit. All
required safety precautions have been adhered to.
POWER. This LED indicates that the loudspeaker is turned on.
+
Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor from the
unit or on the AC power cord. The unit should always
be connected to a mains socket outlet with a
protective earthing connection.
Use the PHASE switch to to modify the B2092A’s phasing
(0°/-90°/-180°/-270°) in respect to the main speakers (also
see ch. 3.3.2).
ROOM COMPENSATION (function for compensating for
different room characteristics). Using this switch, you can
optimize your B2092A for each installation location (ch.
3.3.1).
+
When installing the product, ensure the appliance
coupler or power cord is easily accessible for
disconnecting the unit from mains.
Use the INPUT TRIM control to adjust the input sensitivity.
2. CONTROL ELEMENTS AND CONNECTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
Fig. 2.2: The B2092A connector panel
LEFT IN and RIGHT IN. These are the balanced inputs on
your B2092A. They are laid out as XLR connectors. Connect
them to the outputs on your mixing console or with your
preamplifier (see ch. 3.1).
3. APPLICATIONS
3.1 Connection
LEFT OUT and RIGHT OUT. These outputs carry the
signals for the main left and right loudspeakers. The signal
is tapped into post-crossover, i.e. without the bass segment
used for the subwoofer. Connect your active main
speakers here (with passive speakers, connect the power
amplifier inputs).
Using the mains cable included in the delivery, connect the B2092A
to the mains. To avoid hum noise, your loudspeakers and your
mixing console should all be connected to the same AC circuit.
Connect your loudspeaker system to the Monitor/Control Room
outputs of your mixing console. This way, you can adjust the
listening volume independently from your mixing console’s main
mix signal. The B2092A is an active loudspeaker. Therefore, you
will require no speaker cables. Instead, you will need to use
standard, commercially available two-core shielded XLR
microphone cables.
CENTER IN. Connect the center output of your surround
decoder or amplifier to this connector.
CENTER OUT. This output carries the signal for the central
loudspeaker of a surround system. If the SUB input is being
used, CENTER OUT also carries segments of the SUB signal
with frequencies higher than 80 Hz.
+
Be sure to mute the signal sources before you
power the B2092A on.
Connect the subwoofer or the LFE output of your surround
decoder/amplifier to SUB IN. Frequencies above 80 Hz are
reproduced on the CENTER output, while the B2092A
reproduces the frequencies under 80 Hz.
There are different ways to integrate your B2092A into a
loudspeaker system. Some examples are shown here:
3.1.1 Stereo setup with subwoofer
REMOTE CONTROL. The B2092A can be deactivated
using a footswitch. This way, you can perform an A/B
comparison with and without the subwoofer. If the B2092A
is deactivated, the crossover is also bypassed, so that the
main speaker now reproduce the entire frequency range.
Use the POWER switch to power up your B2092A. The
POWER switch should always be in the “Off” position when
you are about to connect the unit to the mains.
+
+
Please note: The POWER switch does not fully
disconnect the unit from the mains. To disconnect
the unit from the mains, pull out the main cord plug
or appliance coupler. When installing the product,
make sure the plug or appliance coupler is readily
operable. Unplug the power cord when the unit is
not used for prolonged periods of time.
Your B2092A and the corresponding loudspeaker
system should always be the last ones to be turned
on and the first ones to be turned off. This way, you
avoid speaker damage caused by loud crackling
noises during turning other equipment in your
studio on or off.
The mains connection is achieved via the standard IEC
connector. A matching power cord is included.
FUSE COMPARTMENT/VOLTAGE SELECTION: Before
plugging the unit into a power socket, please make sure
you have selected the correct voltage. Faulty fuses must
be replaced with fuses of appropriate rating without
exception. Some units feature a fuse compartment that
can be operated in two different positions, allowing
alternating between 230 V and 120 V. Attention: when
using the unit outside of Europe (running on 120 V), you
have to install a fuse with a higher rating.
Fig. 3.1: Use in a stereo system
6
3. APPLICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
Connect the mixing console outputs to the B2092A inputs marked
LEFT and RIGHT . If you are using active monitors as main
Surround system without decoder:
You can create a surround system even without using a surround
decoder, for example as a multichannel monitor system at your
sound studio or for specific surround installations. The surround
channels are reproduced using a single output of a mixing
console, a surround monitor controller or using the separately
recorded channels of a multitrack recorder.
loudspeakers (e.g. B2030A or B2031A), connect the left
loudspeaker to LEFT OUT, and connect the right loudspeaker to
RIGHT OUT. If using passive loudspeakers, connect LEFT OUT
and RIGHT OUT connectors to the power amplifier inputs.
The B2092A separates the bass segment of the audio signal for
the subwoofer and sends all frequencies above the 80-Hz mark
to the outputs for the main loudspeakers.
Connect the output of the front left channel to the LEFT IN
connector on the B2092A; connect the output of the front right
channel to the RIGHT IN connector. Connect the center channel
output to CENTER IN. If the surround mix has no separate
subwoofer channel, the signal for this channel is created using
the bass segments of the left, center and right channels.
3.1.2 Multichannel surround setup
Now, connect the left (active) front loudspeaker to LEFT OUT.
Connect CENTER OUT to the center speaker and RIGHT OUT to
the right speaker. All additional surround speakers (Left Surround
= LS, Right Surround = RS) are connected directly to the
corresponding outputs on your system.
If you wish to use passive loudspeakers, connect the individual
surround channels of your system to the power amp inputs of
the corresponding surround speakers.
3.2 Input signal level adjustment
If the loudspeaker system is correctly wired and powered on,
you can bring up the control room output of your mixing console
or the volume controls of your decoder. If a signal source is
connected, you can hear your B2092A for the first time. To
obtain well-balanced sound, you only have to adjust the input
sensitivity of your subwoofer. The default INPUT TRIM control
setting is 0 dB. To adjust the signal level to the main speakers,
values from -6 dB to +6 dB can be selected using this control.
LIMIT LED
lights up as soon as one of the internal overload
circuits springs into action. By the way, no damage is caused to
your B2092A if the LIMIT LED briefly lights up during operation
(when signal peaks occur). However, you should try to avoid
the LIMIT LED lighting up for prolonged periods of time (in that
case, after a while the thermal fuse is activated, and the internal
power amplifier is switched off for a while). This is a sure sign
that your B2092A is overloading. Lower the input signal level
either on your mixing console or by using the INPUT TRIM control.
+
The B2092A is capable of producing high volume
levels. You should mix your recordings at moderate
levels to avoid listening fatigue and hearing
impairment.
3.3 Correct placement
Bass frequencies, due to their long wavelengths and undirected
(spherical) dispersion pattern, can not be physically located as
a sound source. Many people take this to mean that you can
place the subwoofer wherever you want. However, this is not
true. Placement of the subwoofer in a room has an important
influence on the overall loudspeaker sound. Even minor changes
in the placement of the subwoofer can make a big difference.
Fig. 3.2: Wiring example for a surround system
Surround system with a decoder:
If you want to integrate the B2092A into a 5.1 loudspeaker system
that is coupled to
a
surround decoder (DTS® or
Each room has its own sonic characteristics, which differ based
on room volume and the length ratio of the walls to the ceiling.
Even the material and the composition of surfaces play a big
role. Specific acoustic characteristic result from these influences,
and they must be taken into consideration.
Dolby Digital®), connect the decoder LFE output to the SUB input
on your B2092A. The signals of a LFE channel (LFE = Low
Frequency Effect or Low Frequency Enhanced) may contain
frequencies of up to 120 Hz. However, since the B2092A does
not reproduce signals above the 80-Hz mark, the LFE signals are
passed onto the CENTER output and are then reproduced on the
center loudspeaker. This way, these important signal segments
are not lost. This is of particularly high value when using the
B2092A as a studio monitor, because this way undesirable noise
and distortion in this frequency range can be kept under control.
Wire the remaining active loudspeakers as shown in the
illustration.
Certain frequencies sometimes create stationary waves
between parallel room walls. The frequencies of these stationary
walls correspond to the room’s resonance, and are determined
by the room’s dimensions. If the room resonance is influenced
by the subwoofer, this frequency gets especially loud in certain
places in the room, while it cannot be heard at all in others—this
is caused by stationary increases and cancellations. This
phenomenon is especially pronounced with low frequencies,
and can be rather unpleasant. We recommend first finding the
position in which the subwoofer achieves the best results without
3. APPLICATIONS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
making any changes, and then using the controls to finetune the
settings, creating the best results possible. Therefore, first set
the controls to the neutral position labeled TYPICAL, i.e. set PHASE
to 0° and ROOM COMPENSATION to 0 dB.
If you are working with the DEQ2496, place the measurement
microphone in your audience at the height of a human ear. Run
pink noise through the speakers. Keep an eye on the 80-Hz
range on the frequency display. If you notice a dip in this
frequency range, put the PHASE switch into a position that causes
Start by placing the subwoofer roughly in the stereo center of
your loudspeaker system. If the frequency response is not well-
balanced, move the subwoofer to the left or to the right, so that
it excites different room modes. Also, experiment with different
distances to the wall and to the room’s corners. If you place the
subwoofer in a corner, the bass level will be increased, changing
the overall settings. When selecting a location for your
subwoofer, make sure that the openings in the back of your
B2092A are not covered.
a
straight frequency response curve, as shown in
fig. 3.4 (the graphic on the left).
4. AUDIO CONNECTIONS
The audio connectors of your B2092A are electronically
balanced and ensure automatic hum and noise reduction.
Of course, you can also connect equipment featuring unbalanced
outputs. To this end, use either mono jacks or connect ring and
sleeve of the stereo jack (bridge pin 1 and pin 3 when using XLR
connectors).
The stereo/front loudspeakers should be placed symmetrically
with the same distance to the listening position. Correct placement
of near-field monitors is explained in detail in the TRUTH B2030A/
B2031A user’s manual and in the TRUTH B2030P/B2031P
handbook.
+
Please ensure that only qualified personnel install
and operate the B2092A. During installation and
operation the user must have sufficient electrical
contact to earth. Electrostatic charges might affect
the operation of the unit.
3.3.1 Adjusting room compensation
Fig. 3.3: Room compensation
After you have found an optimal physical location for your
B2092A speakers, use the switches in the back to finetune your
settings.
The ROOM COMPENSATION switch
lets you lower the bass
range in 2-dB increments. If your B2092A is located near a wall
or in a room corner, the sound is reflected back from the boundary
and superimposed on the directly dispersed sound. This results
in a higher volume, which can be neutralized using the ROOM
COMPENSATION function.
Fig. 4.1: XLR connections
3.3.2 Phase adjustment
Fig. 3.4: Effect of phase differences on the frequency
response
When installing the B2092A, a phasing deviation between the
subwoofer and main speaker signals may occur. This deviation
(phase difference) is easily audible in the sound. Improper
phasing causes a dip at the crossover point. Phasing differences
occur when the distance between the subwoofer and the
audience varies from the distance between the main speakers
and the audience—hence having a varying delay time. This can
not always be avoided. Using the PHASE function, your B2092A
can perform a phase adjustment electronically. Figure 3.5 shows
the possible results of phasing differences on the frequency-
response curve.
Fig. 4.2: 1/4" TS connector for the footswitch
For optimal system calibration, we recommend using a Real Time
Analyzer, e.g. the BEHRINGER ULTRACURVE PRO DEQ2496
coupled to a ECM8000 measurement microphone. If no such
equipment is available, you can try making an adjustment using
an 80-Hz sinus tone:
Run the sinus tone simultaneously on the subwoofer and the
front loudspeakers. Set the PHASE switch to the position in
which the sound with the highest volume is being reproduced.
8
4. AUDIO CONNECTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
5. SPECIFICATIONS
AUDIO INPUTS
Inputs
Left, Center, Right, Sub
Connectors
Input Trim
XLR connector, balanced inputs
±6 dB
Input impedance
10 kΩ (balanced)
AUDIO OUTPUTS
Outputs
Connectors
Left, Center, Right
XLR, balanced
100 Ω
Output impedance
COMPONENTS
2 Woofers
Ø 8" (210 mm)
Nominal impedance
8 Ω
AMPLIFIERS
Power rating
Noise
max. 360 Watt (63 Hz / 0,3 % THD)
>100 dB
CROSSOVER
Subsonic filter
High-cut filter
PHASE switch
33 Hz (18 dB/Oct.)
85 Hz (24 dB/Oct.)
0°/90°/180°/270° @ 80 Hz
SYSTEM SPECIFICATION
Frequency response
Frequency range
32 Hz to 80 Hz (+/-3 dB)
28 to 100 Hz (-10 dB)
max. 117 dB SPL @ 1 m
Sound pressure level
POWER SUPPLY
Voltage
USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
China
220 V~, 50 Hz
Japan
100 V~, 50/60 Hz
General export model
120/230 V~, 50/60 Hz
Power consumption
Mains connection
5 A @ 120 V, 3 A @ 230 V
100 - 120 V~: T 6.3 A H 250 V
200 - 240 V~: T 3.15 A H 250 V
Standard IEC connector
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
24.4" x 12.8" x 22.9"
(620 mm x 325 mm x 582 mm )
73 lbs (33.1 kg)
Weight
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
9
5. SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2092A
6. WARRANTY
§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyer’s statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
or local level, in any country which is not the country for which
the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptation.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
§ 2 ONLINE REGISTRATION
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes, guitar strings,
illuminants and similar parts.
Please do remember to register your new BEHRINGER equipment
conditions of our warranty carefully. Registering your purchase
and equipment with us helps us process your repair claims
quicker and more efficiently. Thank you for your cooperation!
4. Damages/defects caused by the following conditions are
not covered by this warranty:
§ 3 WARRANTY
1. BEHRINGER (BEHRINGER International GmbH including all
BEHRINGER subsidiaries listed on the enclosed page, except
BEHRINGER Japan) warrants the mechanical and electronic
components of this product to be free of defects in material and
workmanship for a period of one (1) year* from the original date
of purchase, in accordance with the warranty regulations
described below. If the product shows any defects within the
specified warranty period that are not excluded from this
warranty as described under § 5, BEHRINGER shall, at its
discretion, either replace or repair the product using suitable new
or reconditioned parts. In the case that other parts are used which
constitute an improvement, BEHRINGER may, at its discretion,
charge the customer for the additional cost of these parts.
s
s
s
improper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER user
or service manuals.
connection or operation of the unit in any way that does not
comply with the technical or safety regulations applicable in
the country where the product is used.
damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that
the defect in question is not covered by the warranty, the
inspection costs are payable by the customer.
2. If the warranty claim proves to be justified, the product will
be returned to the user freight prepaid.
3. Warranty claims other than those indicated above are
expressly excluded.
7. Products which do not meet the terms of this warranty will
be repaired exclusively at the buyer’s expense. BEHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
§ 4 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized
dealer) must call BEHRINGER (see enclosed list) during normal
business hours BEFORE returning the product. All inquiries must
be accompanied by a description of the problem. BEHRINGER
will then issue a return authorization number.
§ 6 WARRANTY TRANSFERABILITY
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGER.
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone
who may subsequently purchase this product. No other person
(retail dealer, etc.) shall be entitled to give any warranty promise
on behalf of BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 5 WARRANTY REGULATIONS
§ 7 CLAIM FOR DAMAGES
1. Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealer’s invoice.
Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replaced.
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER exceed the invoiced value
of the product.
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
* Customers in the European Union please contact BEHRINGER
Germany Support for further details.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of
printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the
trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies
either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly
from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and
have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a
registered trademark.
ALLRIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
10
6. WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
|