User’s Manual
Version 1.0 August 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
TRUTH
High-Resolution, Active 2-Way Reference Studio Monitor
s
s
s
s
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 75- and 35-Watt (B2031A: 150- and 75-Watt) power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 6 ¾" woofer (B2031A: 8 ¾") with special polypropylene diaphragm and deformation-resistant
aluminum die-cast chassis
s
Controlled dispersion characteristics and extremely large “sweet spot” owing to the unique BEHRINGER
wave guide technology
s
s
s
s
s
s
s
s
s
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable, only B2031A)
Magnetic shielding allows placement near computer monitors
Delivered as “matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼" TRS connectors
Designed in Germany. Manufactured under ISO9000 certified management system
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
FOREWORD
TABLE OF CONTENTS
Dear Customer,
1. INTRODUCTION ......................................................... 4
welcome to the team
of BEHRINGER users,
and thank you very
much for expressing
your confidence in us by
purchasing this studio
monitor.
1.1 Before you get started ................................................... 5
1.1.1 Shipment ............................................................... 5
1.1.2 Initial operation...................................................... 5
1.1.3 Warranty .............................................................. 5
2. CONTROL ELEMENTS ............................................... 5
Writing this foreword
for you gives me great
pleasure, because it
represents the cul-
mination of many months
of hard work delivered
by our engineering team
3. APPLICATIONS .......................................................... 6
3.1 Connection ...................................................................... 6
3.2 Level setting ................................................................... 6
3.3 Speaker placement suggestions .................................... 7
3.4 Adapting the TRUTH to the room acoustics................... 7
to achieve
a
very
ambitious goal: to
present two outstanding
4. INSTALLATION ........................................................... 8
5. SPECIFICATIONS ....................................................... 8
6. WARRANTY ................................................................ 9
nearfield
monitors,
whose neutral sound
makes them ideal for studio use. The task of designing our new
B2030A and B2031A certainly meant a great deal of responsibility,
which we assumed by focusing on you, the discerning user and
musician. Meeting your expectations also meant a lot of work
and night shifts. But it was fun, too. Developing a product usually
brings a lot of people together, and what a great feeling it is
when all who participated in such a project can be proud of
what they’ve achieved.
1. INTRODUCTION
Congratulations! With our new BEHRINGER TRUTH you have
purchased one of the best high-resolution active studio monitors
available. It is a tool that reproduces your program material with
highest fidelity and balance, positioning sound sources
accurately on the stereo basis.
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER team.
With your highly competent suggestions for new products you’ve
made a significant contribution to shaping our company and making
it successful. In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
reasonable price. All of this will enable you to give free rein to
your creativity without being hampered by budget constraints.
The TRUTH features two separate amplifiers for bass and
high frequencies, sporting loads of power reserve. On the bass
end, a long-excursion woofer embedded in a sturdy cast-
aluminum casing springs into action. The scope is broadened
downward by using a special bass reflex system. In the upper
frequency range, a specially developed dome tweeter provides
for subtle signal reproduction. The chassis and the amplifiers
are protected from overload using a sophisticated circuitry. The
speakers are magnetically shielded, so you can use your TRUTH
near computer monitors or TV sets. The audio signal is separated
using an active crossover that guarantees accurate frequency
separation and perfect tuning of both speakers among each
other.
We are often asked how we manage to produce such high-
quality devices at such unbelievably low prices. The answer is
quite simple: it’s you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etc. Isn’t it only fair to pass this benefit on
to you? Because we know that your success is our success
too!
I would like to thank all of you who have made the TRUTH
possible. You have all made your own personal contributions,
from the developers to the many other employees at this company,
and to you, the BEHRINGER user.
We recommend that you experiment with your TRUTH away
from the pressures of a recording session, in order to get a feel
for it. It will be a good idea to listen to your favorite CD’s over the
TRUTH, so that you can get an impression of the neutral sound
this speaker produces—which might be somewhat unusual at
first!
My friends, it’s been worth the effort!
Thank you very much,
+
The following user’s manual is intended to
familiarize you with the unit’s control elements,
so that you can master all the functions. After having
thoroughly read the user’s manual, store it at a safe
place for future reference.
Uli Behringer
ATTENTION!
+
The TRUTH is capable of producing extreme
volumes. Please bear in mind, that high sound
pressures do not only temporarily damage your
sense of hearing, but can also cause permanent
damage. Be careful to select a suitable volume.
4
1. INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
1.1 Before you get started
2. CONTROL ELEMENTS
The control elements described in the following are the same
on both loudspeakers.
1.1.1 Shipment
The B2030A/B2031A was carefully packed at the factory to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
+
Damaged units should NEVER be sent directly to us.
Please inform the dealer from whom you acquired
the unit immediately as well as the transportation
company from which you took delivery of the unit.
Otherwise, all claims for replacement/repair may
be rendered invalid.
Fig. 2.1: Front panel display elements (here: B2030A)
ON. This LED lights up as soon as you switch on the
speaker.
1.1.2 Initial operation
LIMIT. Lights up as soon as one of the built-in protections
is activated.
Please make sure the unit is provided with sufficient ventilation,
and never place the TRUTH on top of an amplifier or in the vicinity
of a heater to avoid the risk of overheating.
+
Before plugging the unit into a power socket, please
make sure you have selected the correct voltage:
The fuse compartment near the power plug socket contains
three triangular markings. Two of these triangles are opposite
one another. The voltage indicated adjacent to these markings is
the voltage to which your unit has been set up, and can be
altered by rotating the fuse compartment by 180°. ATTENTION:
This does not apply to export models that were for
example manufactured only for use with 120 V!
Fig. 2.2: Rear panel connectors
All connectors of the TRUTH face downwards, so as to allow
you to place the speaker as closely to a wall as possible.
+
If you alter the unit’s voltage, you must change
the fuse accordingly. The correct value of the
fuse needed can be found in the chapter
“SPECIFICATIONS”.
INPUT. These are the balanced inputs of your TRUTH, laid
out as 1/4" TRS and XLR connectors.
The mains connection is achieved via the standard IEC
connector. A matching power cord is included.
+
Faulty fuses must be replaced with fuses of
appropriate rating without exception! The correct
value of the fuses needed can be found in the
chapter “SPECIFICATIONS”.
FUSE COMPARTMENT/VOLTAGE SELECTION: Before
plugging the unit into a power socket, please make sure
you have selected the correct voltage. Faulty fuses must
be replaced with fuses of appropriate rating without
exception. Some units feature a fuse compartment that
can be operated in two different positions, allowing
alternating between 230 V and 120 V. Attention: when
using the unit outside of Europe (running on 120 V), you
have to implement a fuse with a higher rating.
Power is delivered via the cable enclosed with the unit. All
requiered safety precautions have been adhered to.
+
Please make sure that the unit is grounded at all
times. For your own protection, you should never
tamper with the grounding of the cable or the unit
itself.
1.1.3 Warranty
Please take a few minutes and send us the completely filled
out warranty card within 14 days of the date of purchase. You
needed for the registration is located on the rear of the unit.
Failure to register your product may void future warranty claims.
Fig. 2.3: The POWER switch
Use the POWER switch to power up your TRUTH. The
POWER switch should always be in the “Off” position when
you are about to connect your unit to the mains.
+
Attention: The POWER switch does not fully
disconnect the unit from the mains. Unplug the
power cord completely when the unit is not used
for prolonged periods of time.
2. CONTROL ELEMENTS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
+
The TRUTH should be the last device in the signal
chain to be switched on and the first to be switched
off. This way, loud switch-on “thumps” that can
occur when powering other equipment on or off
can be avoided.
3. APPLICATIONS
3.1 Connection
Use the enclosed power cord to connect the TRUTH to the
mains. To avoid ground loops, both speakers and the mixing
console should be fed from the same outlet. For your convenience,
the B2031A features an automatic power-up system which
activates the TRUTH as soon as a signal is present on its input,
and deactivates the speaker after signal pauses of more than
five minutes (only B2031A).
Function: The switch for the automatic power-up system
has three positions. When set to OFF, the speaker is completely
switched off and cannot be activated with the POWER switch
. Position AUTO allows the automatic operation as mentioned
above. In position ON, the B2031 is activated all the time and can
Fig. 2.4: INPUT TRIM control
INPUT TRIM. Use this control to adapt the TRUTH’s input
sensitivity to the signal source.
be switched off only with switch
.
+
Be sure to switch the TRUTH off with the POWER
switch during longer pauses.
Now connect both speakers to your console by means of
commercial XLR or TRS cables. Since the TRUTH is an active
speaker system, instead of conventional speaker cables you
will need normal TRS or XLR cables.
Connect the TRUTH to the control room outputs of your console,
so as to be able to control the monitoring volume independently
of the main mix level. If your console does not have such outputs,
you can also use the main mix outputs. However, in this case the
speaker volume cannot be set independently of the main mix
level, i.e. you must adjust the monitoring volume on the TRUTH.
Please consult the operating instructions accompanying your
console to find out whether it has balanced or unbalanced outputs.
Fig. 2.5: Rear panel control elements
LOW FREQUENCY. With this switch you can adapt the
woofer to a subwoofer system or emulate the sound
characteristics of small speaker systems.
Connect these outputs to the TRS or XLR
input. If possible
ROOM COMPENSATION. For maximum flexibility the
TRUTH features a switch that adjusts the speaker
depending on its setup position.
use the balanced connectors, so as to avoid interference and
hum. It won’t help, however, to connect unbalanced outputs
with balanced inputs. The benefits mentioned above will apply
only when both inputs and outputs are of the balanced type.
HIGH FREQUENCY. This switch adapts the speaker's
frequency response to the damping characteristics of the
control room.
+
Be sure to mute the signal sources before you put
the TRUTH into operation.
Once the TRUTH has been connected as described above,
you can activate the speaker with the POWER switch.
3.2 Level setting
When the TRUTH has been connected properly and switched
on, you can now turn up the console output that feeds the
B2030A/B2031A. Provided you have a signal source connected,
you now hear the audio material as it is played back by the
Fig. 2.6: Rear panel control elements
The following control elements are found only on the B2031A:
TRUTH. The INPUT TRIM control
on the rear panel is set to
POWER MODE. This switch allows you to toggle between
“ON”, “OFF” and “AUTO” power-up modes (see chapter 3.1).
0 dB ex-factory, i.e. unity gain, which is okay when you feed the
TRUTH from a pro-level console. In this case, the TRUTH
automatically operates at maximum level, provided that your
console has been set up correctly and its output is set to 0 dB.
MUTE LOW. Disables the woofer for servicing and
maintenance.
The LIMIT LED
helps you control the level. It lights up as
MUTE HIGH. Disables the tweeter for servicing and
soon as overloading causes one of the internal protections to
respond. The TRUTH doesn’t get damaged when the LIMIT LED
lights up with occasional signal peaks. However, please make
sure that it won’t light up all the time, because sooner or later this
will activate the thermal protection system and temporarily mute
the built-in amplifiers, to warn you that you are driving the TRUTH
too hard. If so, you can reduce levels either on your console or
maintenance.
using the INPUT TRIM control
. If the outputs on your console
don’t provide studio-level signals, you can turn up the INPUT
TRIM control. If you connect the TRUTH to the preamp output of
your stereo system, it may also be necessary to raise the level
on the TRUTH itself. To build up a rudimentary stereo system,
you can directly connect the outputs of a CD player to the TRUTH’s
inputs, and use the CD player to adjust the volume.
6
3. APPLICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
+
The TRUTH is capable of producing high volume
levels. You should mix your recordings at moderate
levels, so as to avoid listening fatigue and hearing
impairment.
Fig. 3.3: TRUTH setup horizontally
3.3 Speaker placement suggestions
Since the sound of a speaker depends to a great extent on its
surroundings, placing your TRUTH correctly is very important.
Please try to follow these suggestions through. Your efforts will
be rewarded with better sound and higher resolution.
Not only the physical location of speakers but also the acoustic
characteristics of the room have a substantial effect on the way
your TRUTH sounds. Make sure that the room neither sounds too
hall-like nor too dull—basically, neither like a bathroom nor totally
without an echo. You can alter the room acoustics easily by
installing or removing carpets, curtains or furniture. Fabric
covering on the wall opposite the speakers might be a good idea
if the room is too reflective. The next chapter describes how to
adapt the TRUTH to the room acoustics, once it has been set up
properly.
Both speakers are built identically. There is no need to concern
yourself with which speaker should be placed left and which
speaker should be placed right. Place the TRUTH on a flat and
stable surface, if possible use a dedicated speaker stand. In this
way, the speaker is acoustically decoupled and won’t induce
vibrations in nearby objects, which would affect the bass
response. If you cannot use a stand, put the TRUTH on spikes or
damping foam material. Another aspect is the distance between
speaker and wall: keep the speaker away from the wall, as this
would emphasize the bass response, particularly in corners,
where two walls form an angle.
3.4 Adapting the TRUTH to the room acoustics
This chapter describes how you can use the switches on the
rear of the B2030A/B2031A to adapt the speaker to the acoustics
of your control room. However, you should try to improve a
potentially impaired sound by optimizing the loudspeaker
placement beforehand.
The BEHRINGER TRUTH B2030A/B2031A are so-called near-
field monitors, which means that the impact of the room acoustics
on the sound will be reduced considerably owing to the short
distance between speaker and listener.
Fig. 3.4: Rear panel legending
If you are still having problems, you could try the following:
The ROOM COMPENSATION switch
allows you to lower the
bass range, depending on the speaker position. Ex-factory, the
switch is set to a neutral position. If you’ve set up the TRUTH
close to the wall or in a corner, try reducing the low-frequency
level in steps of 2 dB. Since every room and speaker setup are
unique in their acoustic properties, we cannot provide more
specific information here. The same applies to the HIGH
Fig. 3.1: Incorrect speaker setup
This illustration shows how you shouldn’t do it: you can clearly
see that a portion of the sound bounces back from the walls
before it reaches the listener’s ears. Thus, direct and reflected
sound waves overlap which results in a coloration of the sound.
FREQUENCY switch
, which determines the tweeter level
(between +2 dB and -4 dB). Here too, the best setting depends
on the room acoustics. If you have an additional subwoofer
installed, you can attenuate the TRUTH’s lower cutoff frequency
using the LOW FREQUENCY switch
. This can be necessary
when adapting the TRUTH to your subwoofer. Trust your own
aural instinct, but don’t forget: Listening at high volume levels
over long periods leads to listening fatigue and thus reduces
your ability to judge the sound. Consequently, we recommend
regular pauses to keep your hearing “healthy”.
As a general rule, you should set up and adjust the TRUTH
with great care. Above all, you should take your time: unlike hi-fi
speakers, the B2030A/B2031A is tuned to produce a neutral
sound, which can be confusing when you are working for the
first time with such a high-quality speaker. Don’t try to adjust the
TRUTH with its rear panel switches to produce a “bombastic”
sound that impresses you or other listeners. To get a feeling for
the TRUTH’s sound, you should listen to as many records as
possible that were produced in other studios. We also recommend
that you listen to your own recordings over as many other
systems as possible, for example, your car system. If you find
that your mixes are somewhat “dull” in their overall sound, the
reason might be too much treble from your TRUTH. On the other
hand, if you set the bass level too high, you will find that your
mixes lack bass power. Tuning a speaker can take several days’
time, so once again: take your time!
Fig. 3.2: Correct speaker setup
This effect can be reduced by turning the speakers towards
the listener. To make reflections from ceiling or floor less likely,
the tweeters should be on the same height as your ears. Please
note that the TRUTH should be operated vertically. Where this is
impossible, place it horizontally as shown in figure 3.3, to allow
for an improved stereo image.
3. APPLICATIONS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
It might be necessary to insert an equalizer between console
and speaker, in particular, if you prefer extreme setups or sound
images. The BEHRINGER ULTRACURVE PRO DEQ2496 has
proven its usefulness in practice, as it is not only a simple equalizer
but also features a real-time analyzer. You can use our measuring
microphone ECM8000 to automatically adapt the TRUTH to your
room or modify its frequency response.
5. SPECIFICATIONS
AUDIO INPUTS
XLR connector
1/4" TRS
servo-balanced input
servo-balanced input
10 kΩ
+22 dBu
Input impedance
Max. input level
COMPONENTS
B2030A
Tweeter
4. INSTALLATION
¾" ferrofluid-cooled dome
6 ¾" polypropylene diaphragm
The BEHRINGER TRUTH features one balanced XLR and one
balanced 1/4" TRS input. If connecting to other equipment is
possible using balanced inputs, always make such connections
because they offer maximal compensation of disturbing signals.
Woofer
B2031A
Tweeter
Woofer
1" ferrofluid-cooled dome
8 ¾" polypropylene diaphragm
AMPLIFIERS
B2030A
Low frequency
High frequency
Noise
max. 75 Watts
max. 35 Watts
<10 dBA @ 1 m (each)
B2031A
Low frequency
High frequency
Noise
max. 150 Watts
max. 75 Watts
<10 dBA @ 1 m (each)
CROSSOVER
Type
Crossover frequency
active, 4th order Linkwitz-Riley
2 kHz
Fig. 4.1: 1/4" TS connector
SYSTEM SPECIFICATION
B2030A
Frequency response
Sound pressure level
50 Hz to 21 kHz
max. 113 dB SPL @ 1 m (pair)
B2031A
Frequency response
Sound pressure level
50 Hz to 21 kHz
max. 116 dB SPL @ 1 m (pair)
POWER SUPPLY
Voltage
USA/Canada
120 V~, 60 Hz
Europe/U.K./Australia
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model
120/230 V~, 50 - 60 Hz
Fig. 4.2: 1/4" TRS connector
Power consumption
B2030A
B2031A
0.5 A, standby 120 mA
1.1 A, standby 120 mA
Fuse
B2030A
100 - 120 V~: T 2 A H 250 V
200 - 240 V~: T 1 A H 250 V
B2031A
100 - 120 V~: T 5 A H 250 V
200 - 240 V~: T 2.5 A H 250 V
Standard IEC connector
Mains connection
DIMENSIONS/WEIGHT
B2030A
Dimensions (H x W x D)
12 1/2" (317 mm) x 8 2/5"
(214 mm) x 8 1/3" (211 mm)
9 7/8 kg (21 2/3 lbs)
Weight
B2031A
Dimensions (H x W x D)
15 3/4" (400 mm) x 9 13/16"
(250 mm) x 11 3/8" (290 mm)
15 kg (33 lbs)
Fig. 4.3: XLR connectors
Weight
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
8
5. SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
TRUTH B2030A/B2031A
6. WARRANTY
§ 1 WARRANTY CARD/ONLINE REGISTRATION
To be protected by the extended warranty, the buyer must
complete and return the enclosed warranty card within 14 days
of the date of purchase to BEHRINGER Spezielle Studiotechnik
GmbH, in accordance with the conditions stipulated in § 3. Failure
to return the card in due time (date as per postmark) will void any
extended warranty claims. Based on the conditions herein, the
buyer may also choose to use the online registration option via
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes and similar
parts.
4. Damages/defects caused by the following conditions are
not covered by this warranty:
§ 2 WARRANTY
s improper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER user
or service manuals.
1. BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH
including all BEHRINGER subsidiaries listed on the enclosed page,
except BEHRINGER Japan) warrants the mechanical and
electronic components of this product to be free of defects in
material and workmanship for a period of one (1) year* from the
original date of purchase, in accordance with the warranty
regulations described below. If the product shows any defects
within the specified warranty period that are not excluded from
this warranty as described under § 3 and 4, BEHRINGER shall, at
its discretion, either replace or repair the product using suitable
new or reconditioned parts. In the case that other parts are used
which constitute an improvement, BEHRINGER may, at its
discretion, charge the customer for the additional cost of these
parts.
s connection or operation of the unit in any way that does not
comply with the technical or safety regulations applicable in
the country where the product is used.
s damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that
the defect in question is not covered by the warranty, the
inspection costs are payable by the customer.
2. If the warranty claim proves to be justified, the product will
be returned to the user freight prepaid.
7. Products which do not meet the terms of this warranty will
be repaired exclusively at the buyer’s expense. BEHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
3. Warranty claims other than those indicated above are
expressly excluded.
§ 3 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized
dealer) must call BEHRINGER (see enclosed list) during normal
business hours BEFORE returning the product. All inquiries must
be accompanied by a description of the problem. BEHRINGER
will then issue a return authorization number.
§ 5 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone
who may subsequently purchase this product. No other person
(retail dealer, etc.) shall be entitled to give any warranty promise
on behalf of BEHRINGER.
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGER.
§ 6 CLAIM FOR DAMAGES
3. Shipments without freight prepaid will not be accepted.
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER exceed the invoiced value
of the product.
§ 4 WARRANTY REGULATIONS
1. Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealer’s invoice.
Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replaced.
§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyer’s statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
or local level, in any country which is not the country for which
the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptation.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
* Customers in the European Union please contact BEHRINGER
Germany Support for further details.
The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER is a registered trademark. ALL RIGHTS RESERVED.
© 2003 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
9
6. WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
|