Behringer Oxygen Equipment DW400 User Manual

DYNAMIC WAH DW400  
Ultimate Auto-Wah/Human Voice Effects Pedal  
Thank you for showing your confidence in us by purchasing the BEHRINGER DYNAMIC WAH DW400.  
This effects pedal delivers a variety of wah effects including a Human Voice mode creating an  
unbelievable “talking” sound. Experience exciting new sounds!  
1. Controls  
(1) Select the effect mode via the MODE switch:  
(3)  
(9)  
(1)  
UP: Creates a Wah effect. The filter moves  
upwards (from low to high frequencies).  
DOWN: Creates a Wah effect. The filter  
moves downwards.  
SYNTH: A stronger upward Wah effect with  
a synth-like resonance filter sound.  
HUMAN VOICE: Turns your instrument  
signal into the sound of a human voice.  
(4)  
(2)  
(6)  
(8)  
The sound alters between 2 selectable  
vowel sounds and adds slight overdrive.  
(5)  
(7)  
TEMPO: Auto Wah. Tap in the tempo via  
foot switch (10) or external foot switch.  
(2) SENS determines the effect sensitivity,  
depending on the input level. In HUMAN  
VOICE mode, it selects the first vowel.  
In TEMPO mode, this control has  
no function.  
(10)  
(3) The MANUAL control determines the wah  
effects’ lowest frequency. In HUMAN VOICE mode, it selects the second vowel. In TEMPO mode,  
this control has no function.  
(4) The DECAY control determines how quickly the filter is shifted. In TEMPO mode, you can shape the  
LFO waveform from Sine (min) to Square wave (max).  
UP, DOWN, SYNTH  
HUMAN VOICE  
TEMPO  
effect sensitivity,  
depending on input level  
Wah 1:  
Selects the first vowel  
SENS  
no function  
Wah 2:  
Selects the second vowel  
starting frequency  
of Wah effect  
MANUAL  
DECAY  
no function  
Selects the Time used to  
move from Wah 1 to Wah 2  
LFO waveform shape:  
Sine (Min) > Square (Max)  
Envelope  
Response Time  
Fades between Wah 1 and  
Wah 2 (DECAY disabled)  
Wah pedal  
(DECAY disabled)  
Wah pedal (SENS, MANUAL  
and DECAY disabled)  
EXP/CTL*  
*Connect an expression pedal (e.g. the FCV100) to the EXP/CTL connector  
(5) The ¼" TRS EXP/CTL connector can be used to connect two different types of pedals:  
Use an expression pedal for Wah pedal functionality (for all modes).  
Use an external foot switch instead of the pedal foot switch ((10)) to tap in the effect time  
(in Tempo mode only).  
(6) Use the ¼" TS GTR IN connector to plug in a guitar. Use either input (6)or (7).  
(7) Use the ¼" TS BASS IN connector to plug in a bass guitar. If you use this input, the filter parameters  
are optimized for bass signals. With a cable in input (6), this input has no function.  
(8) The ¼" TS OUT connector sends the signal to your amp or other effects devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEDERAL COMMUNICATIONS  
COMMISSION COMPLIANCE INFORMATION  
DYNAMIC WAH DW400  
Responsible Party Name:  
Address:  
MUSIC Group Services US Inc.  
18912 North Creek Parkway,  
Suite 200 Bothell, WA 98011,  
USA  
Phone Number:  
Phone: +1 425 672 0816  
Fax: +1 425 673 7647  
DYNAMIC WAH DW400  
complies with the FCC rules as mentioned in the following paragraph:  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC rules. Operation is subject to the following  
two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause  
undesired operation.  
Important information:  
Changes or modifications to the equipment not expressly approved by MUSIC Group can void  
the user’s authority to use the equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Network Card 3CSOHO100 User Manual
Abit Computer Hardware IS7 User Manual
Accusplit Fitness Electronics 1540M2 User Manual
Acer Flat Panel Television AT4250B ATV User Manual
Acer Personal Computer 5330 User Manual
Alcatel Lucent Network Card 1665 DMX User Manual
AllTrade Air Compressor 540010 User Manual
Audiovox Automobile Alarm PRO 9842 User Manual
Audiovox Car Stereo System ACD95 User Manual
Bang Olufsen Flat Panel Television BeoVision 9 User Manual