Behringer Musical Instrument PB600 User Manual

Stompbox Accessories  
PEDAL BOARD  
PB600  
Pedal Board with 9 V DC Power Supply  
and Patch Cables  
Ultra-compact and lightweight pedal  
board for transporting up to 6 effects  
pedals, including patch cables  
Generous 1.7 A power adapter  
included for powering more  
than 12 devices*—includes  
1 x 6 daisy-chain cabling  
When effects are an integral part of your  
rig, their power adapters and patch cables  
can often be the most vulnerable part, and  
the most likely to sabotage your set if they're  
not pampered. Rather than tossing your  
pedals, power adapters and all other cabling  
into a duffel bag after a gig, keep them  
safe—and ready to rock at a moment’s  
notice—with the PB600.  
Ultra-rigid plastic design withstands  
even heavy impact  
High-quality components and  
exceptionally rugged construction  
ensure long life  
It's all about connections  
Conceived and designed by  
BEHRINGER Germany  
This awesome pedal board makes  
hooking up six 2.5" x 4.5" pedals as easy  
as hooking up just one (of course, if you're  
using pedals that aren’t 2.5" x 4.5", the snug  
foam padding can be cut to accommodate  
pedals of varying shapes). The PB600  
* Depends on the power consumption  
of the effects pedals, etc.  
includes ¼" patch cables, so you can leave  
your pedals connected to one another, ready  
to pass signal even when you’re transporting  
them. It also comes with 1 x 6 daisy chain  
cabling so that when you plug in the 1.7 A  
power adapter, all your pedals receive power.  
Meanwhile, all cabling remains safe and  
free of strain. Failure is almost guaranteed  
when you’re dealing with a rat’s nest of loose  
cabling, but with the PB600, your effects  
chain is always safe and organized.  
Connect your guitar, bass or keyboard to  
the single ¼" input in the upper right corner  
of the board. A pair of ¼" FROM EFFECTS  
jacks in the upper left corner allow you to  
connect stereo effects, and two ¼" OUTPUT  
TO AMP jacks send a left and right stereo  
signal to up to two amps.  
When it’s time to load out, just unplug  
the power supply, disconnect your guitar  
and amp, put the lid back on the PB600  
and slide the locking latches back into  
place. The heavy-impact plastic casing will  
protect your pedals from the very worst  
dings, scrapes and scratches the road  
throws your way.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page 3 of 3  
PEDAL BOARD  
PB600  
FROM EFFECTS  
connectors receive  
stereo signal from  
pedals. OUTPUT TO AMP  
connectors send signal  
to two amps  
Sliding locks  
hold lid firmly  
in place when  
pedal board is  
not in use  
1.7 A power  
adaptor  
connector  
DC cabling  
duct  
DC OUT  
Heavy-duty  
plastic  
casing  
Foam padding  
¼" TS INPUT connector  
receives signal from  
instrument.  
¼" TS TO EFFECTS  
connector sends signal  
to effects pedals  
connector  
powers all  
effects via  
daisy chain  
holds effect  
pedals in place  
SPECIFICATIONS  
China  
Japan  
220 V~, 50 Hz  
PB600  
Dimensions  
(HxWxD)  
GPE182-090170-5 (HSB-CCC)  
Power Supply  
9 V, 1.7 A switching  
adaptor(included)  
13 x 26 18 x 4 ½"  
100 V~, 50/60 Hz  
GPE182-090170-6 (HSB-JP)  
329 x 663.6 x 115 mm  
Connectors  
¼" TS, unbalanced  
PB1000  
Weight  
Power connector  
2 mm DC jack, center negative  
(with daisy-chain cable included)  
USA/Canada  
120 V~, 60 Hz  
GPE182-090170-1 (HSB-UL)  
approx. 11.8 lbs / 5.3 kg  
including PSU & daisy chain  
Power consumption 2 mA  
Europe/Australia  
230 V~, 50 Hz  
GPE182-090170-2 (HSB-EU)  
PB600  
approx. 8.4 lbs / 3.8 kg  
including PSU & daisy chain  
PHYSICAL  
U.K.  
GPE182-090170-3 (HSB-UK)  
Please note these specifications are preliminary and conceptual in nature,  
and as such are subject to change as product development progresses.  
This information is supplied for market research purposes only and is not  
to be made public in any manner. This document is solely the property of  
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon  
request of the owner.  
PB1000  
Dimensions  
( H x W x D )  
Korea  
220 V~, 60 Hz  
GPE182-090170-4 (HSB-SAA)  
504.3 x 663.6 x 115 mm  
1 9 7/8 x 2 6 18 x 4 ½"  
For service, support or more information contact the BEHRINGER location nearest you:  
Europe  
Tel.: +49 2154 9206 4149  
Fax: +49 2154 9206 4199  
Singapore  
Tel.: +65 6845 1800  
Fax: +65 6214 0275  
Tel.: +61 03 9877 7170  
Fax: +61 03 9877 7870  
Japan  
Tel.: +81 3 5281 1180  
Fax: +81 3 5281 1181  
USA/Canada Tel.: +1 425 672 0816  
Australia  
Fax: +1 425 673 7647  
©2011 Red Chip Company Ltd. Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which  
may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00382  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3D Connexion Dishwasher 555 540 702 User Manual
Accusplit Watch A625XCL User Manual
Acer Gas Grill 471558 User Manual
AEG Dishwasher ESL 63010 User Manual
AEG Washer 70330 User Manual
Alloy Computer Products Switch GSS 24T2SFP User Manual
Alpine Car Stereo System CDE 130R User Manual
Amana Microwave Oven RC17 User Manual
Behringer Speaker B1220 User Manual
Beko Freezer BZ 77F User Manual