Behringer Musical Instrument Amplifier AB100 User Manual

INSTRUMENT/AMP SELECTOR AB100  
Thank you for showing your confidence in us by purchasing the BEHRINGER  
INSTRUMENT/AMP SELECTOR AB100. This high-quality instrument and amp switch  
is designed for both guitar & bass players who use several amps or instruments.  
The AB100 allows you to switch between gear noiselessly and instantaneously,  
adjusting individual volume settings without coloring the sound of your instrument.  
1. CONTROLS  
Controls and connections  
IN 1: this 1/4" TS jack is the first AB100 input. Plug in an instrument here  
(guitar, bass, etc.).  
OUT A: this 1/4" TS jack is the first AB100 output. Plug in an amp or an effect  
here.  
OUT B / IN 2: this 1/4" TS jack can be used as a second output or a second  
input, depending on the position of selector  
.
The MODE selector adapts the AB100 to your system: If you play one  
instrument and two amps, set MODE in the upper position to get one input for  
two outputs. In this case, connector  
serves as a second output (OUT B).  
Otherwise, if you play two instruments and one amp, set MODE in the lower  
position to get two inputs for one output. In that case, connector  
as a second input (IN 2).  
serves  
Use the A LEVEL button to set the volume of OUT A. The output is active when  
the green LED is lit.  
When MODE is in the upper position, use the B LEVEL button to set the volume  
of OUT B. The output is active when the red LED is lit.  
Use the footswitch to noiselessly and instantaneously toggle between two  
amps (MODE selector in the upper position) or two instruments (MODE selector  
in the lower position).  
Use the DC IN connection to plug in a 9 V power supply (not included).  
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or  
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be  
careful not to scratch the unit.  
+
The AB100 has no on/off switch. As soon as you insert the jack into the IN  
connector, the AB100 begins running. When not using the AB100, remove  
the jack from the IN connector. This extends the life of the battery.  
The SERIAL NUMBER is located at the bottom of the unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

A4 Tech Mouse G7 630 User Manual
ADI Systems Marine Radio AT 201 User Manual
Agilent Technologies Thermometer FS2334 User Manual
Alps Electric Switch SKPL Series User Manual
Alto Shaam Oven ED2 96 2S User Manual
Ask Proxima Projector C175 User Manual
Axis Communications Security Camera P1354 E User Manual
Axis Communications Security Camera Q1932E User Manual
Behringer DJ Equipment SX3242FX User Manual
Eureka Tents Tent Breezeway User Manual