User manual
A50-78813-00002
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
EUROLIVE
Digital Processor-Controlled 600-Watt 15" PA Speaker System with Integrated Mixer
s High-power 600-Watt 2-way PA sound reinforcement speaker system with integrated mixer for live and
playback applications
s State-of-the-art 24-bit digital signal processor for ultimate system control:
- Digital crossover, phase and time correction for perfect driver alignment plus dual compressor/limiter for
total system protection
- Digital Noise gate, Low-cut filter, 2-band EQ, dynamic Contour filter for ultimate sound reproduction
s 2 ULN Mic/Line inputs with individual volume controls and peak LEDs
s Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
s State-of-the-art 1.75" titanium-diaphragm compression driver for exceptional high-frequency reproduction
s Ultra-wide dispersion and large format exponential/conical horn with multi-cell aperture throat
s Additional Line output enables linking of additional speaker systems
s Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
s Ergonomically shaped handles for easy carrying and setup
s High-quality components and exceptionally rugged construction ensure long life
s Conceived and designed by BEHRINGER Germany
3
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
Table of contents
Foreword
Dear customer,
1. Introduction ............................................................... 5
Welcome to the team of
BEHRINGER users, and
thank you very much
for expressing your
confidence in us by
purchasing these PA
loudspeakers.
1.1 Before you get started ................................................... 5
1.1.1 Shipment ............................................................... 5
1.1.2 Initial operation...................................................... 5
1.1.3 Online registration ................................................ 5
2. Control elements and connections ......................... 6
Writing this foreword for
you gives me great
pleasure, because it
represents the culmination
of many months of hard
work delivered by our
engineering team to
achieve a very ambitious
goal: to develop an
outstanding PA system
that offers a maximum in
3. Setting up the B415DSP ........................................... 7
3.1 Tweeter .......................................................................... 7
3.2 How to avoid feedback .................................................. 7
4. Application examples ............................................... 8
4.1 Presentations.................................................................. 8
4.2 PA systems ..................................................................... 8
4.3 Other uses ...................................................................... 9
flexibility
and
performance through its impressive sound character and
outstanding features. The task of designing our new B415DSP
certainly meant a great deal of responsibility, which we assumed
by focusing on you, the discerning user and musician. Meeting
your expectations also meant a lot of work and night shifts. But
it was fun, too. Developing a product usually brings a lot of
people together, and what a great feeling it is when all who
participated in such a project can be proud of what theyve
achieved.
5. Installation ................................................................. 9
6. Specifications .........................................................10
7. Warranty ................................................................. 11
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER team.
With your highly competent suggestions for new products youve
made a significant contribution to shaping our company and making
it successful. In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
reasonable price. All of this will enable you to give free rein to
your creativity without being hampered by budget constraints.
We are often asked how we manage to produce such high-
quality devices at such unbelievably low prices. The answer is
quite simple: its you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etc. Isnt it only fair to pass this benefit on
to you? Because we know that your success is our success too!
I would like to thank all people whose help on the B415DSP has
made it all possible. Everybody has made very personal
contributions, starting from the designers of the unit to the many
staff members in our company and finally to you, the user of
BEHRINGER products.
My friends, its been worth the effort!
Thank you very much,
Uli Behringer
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
IMPORTANT NOTE CONCERNING INSTALLATION
1. Introduction
+
The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency
sources. Increase the distance between the
transmitter and the device and use shielded cables
for all connections.
Thank you very much for expressing your confidence in
BEHRINGER products by purchasing the EUROLIVE B415DSP.
The B415DSP is a state-of-the-art digitally controlled PA speaker
system that will simply blow you away. Its bi-amped 600-Watt
engine drives a high-efficiency 15" woofer for brutal punch and
a 1.75" titanium driver for high-end resolution. The built-in mixer
allows you to run the show without any extra equipment.
A powerful 24-bit DSP controls the crossover, a dual compressor/
limiter, phase and time corrections and even a noise gate. The
intelligent dynamic EQ makes sure your system sounds perfect
at any sound level.
1.1.3 Online registration
Please remember to register your new BEHRINGER equipment
read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have
it repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was
purchased. Should your BEHRINGER dealer not be located in
your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
+
Please read this manual to familiarize yourself with
the control elements of the unit and its functions.
After you have carefully read this manual, keep it
for future reference.
1.1 Before you get started
1.1.1 Shipment
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Your B415DSP was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
Thank you for your cooperation!
+
Damaged equipment should NEVER be sent directly
to us. Please inform the dealer from whom you
acquired the unit immediately as well as the
transportation company from which you took
delivery. Otherwise, all claims for replacement/
repair may be rendered invalid.
+
+
+
Please always use the original packaging to avoid
damage due to storage or shipping.
Never let unsupervised children play with the
B415DSP or with its packaging.
Please dispose of all packaging materials in an
environmentally friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling.
To avoid overheating, do not place the B415DSP on top of power
amps or near radiators, etc.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
+
Please make sure that all equipment is properly
grounded at all times. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cord.
1. Introduction
5
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
2. Control elements and connections
Fig. 2.1: Control elements and connections
Power is supplied via an IEC connector. The matching
Use the MIC/LINE inputs (XLR connectors) for connecting
cable is provided with the unit.
audio signals.
Use the POWER switch to turn on the B415DSP. Before
connecting the unit to the power mains, ensure that the
POWER switch is in OFF position.
The LINE OUT XLR jack provides the signal with no
additional gain applied in order to connect another
loudspeaker, for example. The output signal is a mix of
both input signals. (See Chapter 4.2 for more information
on how to use several loudspeakers)
+
Attention: The POWER switch does not fully
disconnect the unit from the mains. To disconnect
the unit from the mains, pull out the main cable plug
or appliance coupler. When installing the product,
ensure the plug or appliance coupler is readily
operable. Unplug the power cord completely when
the unit is not used for long periods of time.
The B415DSP is equipped with a 2-band tone control. Each
band allows you to apply a maximum boost/cut of 15 dB, in its
center position the equalizer is set to neutral.
Use the EQ HIGH control to cut or boost the treble range
by 15 dB. The cut-off frequency is 12 kHz.
Use the LEVEL control to adjust the signal gain of the
MIC/LINE inputs. Before you connect or disconnect a signal
source to or from one of the inputs, please turn the
corresponding control fully to the left. Once the signal source
is connected, increase the volume as desired by turning the
control clockwise. Always make sure that the CLIP LED
does not light up at all or with signal peaks only.
Use the EQ LOW control to cut or boost the bass range by
15 dB. The cut-off frequency is 100 Hz.
The B415DSP features a high-pass filter with a slope of
24 dB/oct. to eliminate unwanted low-frequency content,
such as pop sounds produced by hand-held microphones,
or rumble or wind noise when using high-sensitivity
microphones. The LOW CUT control adjusts the cut-off
frequency. If you want to use the B415DSP in combination
with a subwoofer, you can use the high-pass filter to
lower the bass range reproduced by the subwoofer. This
allows you to operate the B415DSP even without an
external frequency crossover. Set the cut-off frequency
to the highest frequency that can be reproduced by the
subwoofer.
Line-level signals:
Devices with high output levels (e.g. the outputs of mixing
consoles or CD players) only need little gain. In this case,
the LEVEL control will mostly be positioned somewhere in
the area marked LINE (left half of the control range).
Microphone signals
Low-level microphone signals need more gain. When
microphones are used, the control will be positioned in the
MIC area (right half of the control range).
The CONTOUR switch governs the dynamic contour filter:
SPEECH
Setting the CONTOUR switch to SPEECH (switch not
pressed) will optimize the frequency response for speech
applications. This will raise the midrange, which in turn
ensures better intelligibility.
+
We would like to draw your attention to the fact that
extremely loud sound levels may damage your
hearing as well as your headphones/loudspeakers.
Turn the LEVEL control fully to the left before you
switch on the unit. Be careful to select a suitable
volume at all times.
MUSIC
Setting the CONTOUR switch to MUSIC (switch pressed)
will optimize the frequency response for music playback.
The CLIP LED lights up when the input signal level is too
high. In this case, turn the LEVEL control
to the left
until the LED goes out or only lights up at peak levels.
6
2. Control elements and connections
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
The TIMED TURNOFF switch activates the automatic turn-
off function:
3.2 How to avoid feedback
Always place the microphones (viewed from the audience)
behind the B415DSP, never in front of it (Fig. 3.2). When you
wish to adjust the controls on the B415DSP while holding a
microphone, please approach the loudspeaker from the rear to
avoid feedback.
ON
When the switch is actuated (ON position), the automatic
turn-off function is active. The loudspeaker is turned off
automatically when it receives no signal for more than 3
minutes. As soon as a signal is received, the loudspeaker
is switched back on.
OFF
If the switch is not actuated (OFF position) then the speaker
remains switched on and can only be deactivated via the
POWER switch
.
A noise-gate allows you to eliminate unwanted noise during
signal pauses. This is done by a circuit that mutes the
output when the signal level drops below a preset
threshold. Use the NOISE GATE control to determine the
threshold below which the noise-gate closes.
Fig. 3.2: Right and wrong positioning
The TH LED lights up as soon as the signal level drops
below the threshold value adjusted with the NOISE GATE
Since the B415DSP can be placed on the floor at an angle as
shown in the illustration below, you can also use it as a monitor
speaker on stage. In contrast to PA speakers, stage monitors
are used to direct sound towards individual performers on stage.
When microphones are used, it is not easy to position the monitor
speakers, since the microphones are moved around in front of
them, often coming very close. To avoid feedback, it is
recommended that you carefully select and direct the microphones
used. Basically, you should use microphones with a high
directivity, i.e. with a cardioid or hyper-cardioid polar pattern.
Never hold a microphone so that its main pick-up area points
directly towards the loudspeaker. When you hold it with its less
sensitive side towards the speaker box, you can move closer to
the speaker.
control
(the noise-gate closes).
The LED on the front indicates the following operating status:
Indicator
Operating status
BLUE light
The device is switched on
BLUE light
(dimmed)
Device is on standby
(if TIMED TURN-OFF activated)
VIOLET light
fl ashing RED
same function as CLIP LED
Device is overheating!
Switch off the speaker until it cools down
Tab. 2.1: Frontal LED operating status
Microphones with a cardioid polar pattern should always be
directed at a 90° angle to the axis of the loudspeaker (Fig. 3.3,
left). Microphones with a hyper-cardioid polar pattern should
always be positioned at an acute angle to the axis (Fig. 3.3,
right).
3. Setting up the B415DSP
The sound of your B415DSP largely depends on the room
acoustics. Please observe the following hints to get the most out
of your B415DSP.
3.1 Tweeter
High frequencies are the very part of the audio spectrum that
ensure a clear perception of sound and speech intelligibility.
Although these frequencies can be located most easily, they are
also the first to be blocked acoustically. We therefore recommend
that you set up your speakers on speaker stands (not included),
so that the tweeter radiates its signals slightly above the heads
of the audience. This will ensure both an optimum dispersion of
the high-frequency content and a considerably improved speech
intelligibility.
Fig. 3.3: The B415DSP as a monitor loudspeaker
+
If you encounter persistent feedback problems,
consider using our proven FEEDBACK DESTROYER
PRO FBQ2496 for line-level signals. For signals with
line or microphone level, we recommend our
BEHRINGER SHARK DSP110.
Fig. 3.1: B415DSP mounted on a stand
3. Setting up the B415DSP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
4.2 PA systems
4. Application examples
PA is short for public address and includes all applications that
involve a larger audience. This example uses a mixing console
as its central unit for system operation and connections. All
microphones, feeding and effects devices, etc. are connected
to the mixing console, which is then linked to the B415DSP.
4.1Presentations
With just one B415DSP and one or two dynamic microphones,
you can set up a basic audio system with very little effort. Thanks
to the built-in mixer section, you can connect the microphones
directly to the B415DSP. Mount the B415DSP on a speaker stand
for optimum presentation and intelligibility of announcements. If
one B415DSP is not enough, you can, of course, use a second
or even more loudspeakers.
Connecting a mixing console:
s
Turn the LEVEL controls
fully to the left.
s
Connect the left output of the mixing console to the MIC/
LINE connector of the left loudspeaker, and the right mixing
console output to the right loudspeaker.
Connecting microphones:
s
s
Switch on the B415DSP.
s
s
s
s
Turn the LEVEL controls
fully to the left.
Raise the level of the mixing console output to a level of
0dB.
Connect your microphones to the MIC/LINE inputs.
Switch on the B415DSP.
s
Turn the LEVEL controls
the volume of your choice. When the CLIP LEDs light up,
this indicates that the maximum volume has been reached.
gradually clockwise to set
Turn the LEVEL controls
gradually clockwise to set
the volume of your choice. Observe the CLIP LEDs while
adusting the volume. Make sure they never shine constantly
but only light up at peak levels.
s
Use the LINE OUT connector
second B415DSP.
to connect an (optional)
+
Never place a microphone directly in front of the
loudspeaker owing to danger of feedback! When
operating the B415DSP make sure that you always
stay behind the loudspeaker to avoid feedback.
Fig. 4.2: Connecting a mixing console
Fig. 4.1: Connecting microphones
Instead of a mixing console, you can also connect a stereo
signal source, e.g. a CD player. In this case, one B415DSP is
connected to each of the outputs of the signal source.
Connecting a stereo signal source:
s
Turn the LEVEL controls
fully to the left.
s
Connect the left output of the stereo device to the MIC/LINE
connector of the left loudspeaker, and the right stereo
device output to the MIC/LINE connector of the right
loudspeaker.
s
s
Switch on the B415DSP.
Raise the output level of the stereo signal source (if
available), ensuring that it does not overload the input.
s
Turn the LEVEL controls
the volume of your choice.
gradually clockwise to set
8
4. Application examples
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
Linking several B415DSP:
4.3 Other uses
If you need more sound pressure, for example in larger rooms,
simply increase the number of loudspeakers on each stereo
side. You could place two B415DSP on each stereo side and
interconnect them (see Fig. 4.3). The loudspeakers can be stacked
or placed one beside the other. When you stack the speakers,
the carrying recesses built into the cabinets ensure the stability
of the stack. You can connect a microphone, a mixing console or
stereo signal source.
Monitoring:
When used as a monitor, the B415DSP receives its audio signal
from the monitor or aux output of the mixing console. If additional
B415DSPs are to be used, you can loop the audio signal from the
first speaker to the next B415DSP using the line output. The
sound and volume of each B415DSP can be adjusted with their
own operating elements
(EQ LOW).
(LEVEL),
(EQ HIGH) and
s
Connect the LINE OUT connector
of the first B415DSP
Keyboard amplification:
to the MIC/LINE input of the next B415DSP.
Guitarists and bassists usually have their own amplifiers on
stage to make sure they can hear their own instrumenteven
when no monitors are used. In particular on smaller stages, the
power delivered by these amps is enough to match the volume
produced by other sound sources on stage. Things are different
with keyboards and synthesizers as these usually have no built-
in speakers. The B415DSP allows you to connect and mix two
keyboards. If you want to play more than two keyboards, you
can use a submixer (e.g. MicroMIX MX400) to mix down the
signals and route them to the B415DSP using submixer output
connectors. The second MIC/LINE input can be used to connect
the monitor signal from the PA mixing console, so that you can
also hear the other members of your band.
+
With several B415DSP speakers connected to each
other, their input impedance will be reduced by half
(two B415DSPs), or to one third (three B415DSPs),
etc. Always use the output impedance of the mixing
console as a basis for your calculations!
5. Installation
Both audio inputs and outputs of the BEHRINGER B415DSP are
fully balanced. To maximize interference compensation, try to
establish balanced connections to other equipment, whenever
possible.
+
Make sure that only competent people install your
B415DSP. They must be sufficiently earthed during
and after the installation process. Otherwise,
electrostatic discharges may negatively affect the
operating characteristics of your equipment.
Fig. 4.3: Linking several B415DSP speakers
Fig. 5.1: XLR connector
5. Installation
9
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
6. Specifications
AUDIO INPUTS
MIC/LINE (2)
Input impedance
Sensitivity
XLR (balanced)
27 kOhm
-40 to +10 dBu
AUDIO OUTPUTS
LINE OUT
Output impedance
XLR (balanced)
120 Ohm
PROCESSING
DSP
24-bit fixed-point Motorola
24-bit / 48 kHz
AD/DA converter
Limiter
dual protection for woofer and
driver
Dynamic EQ
NOISE GATE
TIMEDTURNOFF
CONTOUR
dual parametric EQs
variable (off to -30 dB)
switchable (3 min < -45 dBr)
switchable speech / music
contour
EQHIGH
EQLOW
LOW CUT
+/- 15 dB (12 kHz)
+/- 15 dB (100 Hz)
40 - 160 Hz (24 dB/Oct.)
SYSTEM DATA
Frequency range
Crossover
Max. sound pressure level
Dispersion angle
40 Hz to 20 kHz
1.5 kHz, Butterworth, 24 dB/Oct.
128 dB @ 1 m
90° x 45°
OUTPUT POWER
Low-frequency range
RMS @ 1% THD
Peak Power
320 W @ 8 Ohm
460 W @ 8 Ohm
High-frequency range
RMS @ 1% THD
Peak Power
80 W @ 8 Ohm
140 W @ 8 Ohm
POWER SUPPLY
Mains Voltage/Fuse
100 V~, 50/60 Hz
120 V~, 60 Hz
220 V~, 50 Hz
230 V~, 50 Hz
T 6,3 A H 250 V
T 6,3 A H 250 V
T 4,0 A H 250 V
T 4,0 A H 250 V
max. 650 W
Power consumption
Mains connector
Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
29" x 18 ½" x 17"
735 mm x 470 mm x 430 mm
approx. 74 lbs.
Weight
approx. 34 kg
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
10
6. Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
EUROLIVE B415DSP
7. Warranty
§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyers statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contract.
2. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
or local level, in any country which is not the country for which
the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanship. The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptation.
2. The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty law.
§ 2 ONLINE REGISTRATION
Please do remember to register your new BEHRINGER equipment
conditions of our warranty carefully.
3. Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes, guitar strings,
illuminants and similar parts.
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!
§ 3 WARRANTY
4. Damages/defects caused by the following conditions are not
covered by this warranty:
1. BEHRINGER (BEHRINGER International GmbH including all
BEHRINGER subsidiaries listed on the enclosed page, except
BEHRINGER Japan) warrants the mechanical and electronic
components of this product to be free of defects in material and
workmanship for a period of one (1) year* from the original date
of purchase, in accordance with the warranty regulations
described below. If the product shows any defects within the
specified warranty period that are not excluded from this
warranty as described under § 5, BEHRINGER shall, at its
discretion, either replace or repair the product using suitable
new or reconditioned parts. In the case that other parts are used
which constitute an improvement, BEHRINGER may, at its
discretion, charge the customer for the additional cost of these
parts.
s
s
s
improper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER user
or service manuals.
connection or operation of the unit in any way that does
not comply with the technical or safety regulations
applicable in the country where the product is used.
damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that the
defect in question is not covered by the warranty, the inspection
costs are payable by the customer.
2. If the warranty claim proves to be justified, the product will be
returned to the user freight prepaid.
3. Warranty claims other than those indicated above are expressly
excluded.
7. Products which do not meet the terms of this warranty will be
repaired exclusively at the buyers expense. BEHRINGER will
inform the buyer of any such circumstance. If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit C.O.D. with a separate invoice
for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
§ 4 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized dealer)
must call BEHRINGER (see enclosed list) during normal business
hours BEFORE returning the product. All inquiries must be
accompanied by a description of the problem. BEHRINGER will
then issue a return authorization number.
§ 6 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone
who may subsequently purchase this product. No other person
(retail dealer, etc.) shall be entitled to give any warranty promise
on behalf of BEHRINGER.
2. Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 5 WARRANTY REGULATIONS
§ 7 CLAIM FOR DAMAGES
1. Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealers invoice.
Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replaced.
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER exceed the invoiced value
of the product.
* Customers in the European Union please contact BEHRINGER Germany
Support for further details.
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All
trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN and EUROLIVE) mentioned belong to their respective owners and are not
affiliated with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part
upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. Products are sold
through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER
by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER
International GmbH.
ALL RIGHTS RESERVED.
© 2008 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany,
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
7. Warranty
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
EUROLIVE
B415DSP
Responsible party name:
BEHRINGER USA, Inc.
Address:
18912 North Creek Parkway, Suite 200
Bothell, WA 98011, USA
Phone/Fax No.:
Phone: +1 425 672 0816,
Fax: +1 425 673 7647
hereby declares that the product(s)
EUROLIVE B415DSP
complies/comply with the FCC rules as mentioned in the following paragraph:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
= Reorient or relocate the receiving antenna.
= Increase the separation between the equipment and receiver.
= Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
= Consult the dealer or an experienced radio/TV technician for help.
Important information:
Changes or modifications to the equipment not expressly approved by
BEHRINGER USA can void the user’s authority to use the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
|