User Manual
ULTRABASS BX1800
180-Watt Bass Amplifier with Original BUGERA Speaker
and VTC-Technology
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ULTRABASS BX1800 User Manual
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED
UNDERTAKING OR REPRESENTATION. THIS MANUAL
IS COPYRIGHTED. NO PART OF THIS MANUAL MAY
BE REPRODUCED OR TRANSMITTED IN ANY FORM
Important Safety
Instructions
blade or the third prong are provided for your safety. If the OR BY ANY MEANS, ELECTRONIC OR MECHANICAL,
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
INCLUDING PHOTOCOPYING AND RECORDING OF ANY
KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSIC GROUP IP LTD.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Terminals marked with this symbol carry
electrical current of sufficient magnitude
to constitute risk of electric shock.
ALL RIGHTS RESERVED.
© 2013 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands
11. Use only attachments/accessories specified by
the manufacturer.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. All other
installation or modification should be performed only
by qualified personnel.
12. Use only with the
cart, stand, tripod, bracket,
or table specified by the
LIMITED WARRANTY
For the applicable warranty terms and conditions
and additional information regarding MUSIC Group’s
Limited Warranty, please see complete details online at
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the
enclosure - voltage that may be sufficient to constitute a
risk of shock.
injury from tip-over.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualified personnel.
Caution
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by qualified service personnel only.
To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualified
service personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND APPEARANCES
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND
ACCURACY IS NOT GUARANTEED. BEHRINGER,
KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND
ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO
LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED
BY ANY PERSON WHO RELIES EITHER WHOLLY OR
IN PART UPON ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT.
MUSIC GROUP PRODUCTS ARE SOLD THROUGH
AUTHORIZED FULLFILLERS AND RESELLERS ONLY.
FULLFILLERS AND RESELLERS ARE NOT AGENTS OF
MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ULTRABASS BX1800 User Manual
1. Introduction
1.1.2 Initial operation
With the BX1800 you have acquired a state-of-the-art Bass Workstation that sets Be sure that there is enough space around the unit for cooling. To avoid
new standards in bass amp engineering. Right from the start, our goal has been
to design a revolutionary amp that stands out from the herd of “ordinary” bass
amplifiers. And indeed, the BX1800 gives you plenty of functionality and a broad
range of connection and expansion options. In short: you’ll be fascinated to find
that the BX1800 is a Workstation with a character.
overheating, please do not place the ULTRABASS near radiators and other
equipment emanating heat.
◊
Please keep in mind that all the equipment has to be grounded at all
times. For your own protection, never change or disable the grounding
on your equipment or on the cables! The unit shall always be connected
to the mains socket outlet with a protective earthing connection.
VTC Virtual Tube Circuitry
The VTC Virtual Tube Circuitry was specially developed to lend the bass sound the 1.1.3 Online registration
unique character of classic tube amps.
Please register your new BEHRINGER equipment right after your purchase
warranty carefully.
Jam it up!
With its CD player input, your BX1800 is the ultimate practice amp,
because it couldn’t be easier to play along to your favorite music. If you don’t
want anybody listening to what you’re playing, or simply wish to avoid disturbing
the neighbors, just use your headphones. The BEHRINGER HPS3000 is ideal just
for that.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
◊
Please read the manual carefully and keep it around for
future reference.
Attention!
High volume levels can damage your hearing or your headphones.
◊
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Please turn down the VOLUME control to zero (all the way to the left)
before you power up the amp. Always make sure you use appropriate
volume levels.
Thank you for your cooperation!
1.1 Before you get started
1.1.1 Shipment
Your BX1800 was carefully packed at the factory, and the packaging was
designed to protect the unit from rough handling. Nevertheless, we recommend
that you carefully examine the packaging and its contents for any signs of
physical damage that may have occurred during transit.
◊
If the unit is damaged, please do NOT return it to BEHRINGER.
Instead, notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be honored.
◊
◊
◊
Always use the original packing carton to prevent damage during
storage or transport.
Make sure that no children are left unsupervised with the BX1800 or
its packaging.
Please ensure proper disposal of all packing materials.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
ULTRABASS BX1800 User Manual
2. Wiring Tips
Figures 2.1 and 2.2 show you how to connect your bass to the amplifier.
Fig. 2.2 shows a recommended setup for amplifying the sound of your BX1800
using a sound reinforcement system of any size. This way, you can also use your
amp for playing live or for rehearsals with your band.
If you want to use an effects unit (for example, the BEHRINGER X V-AMP PRO)
to experiment with some out-of-the-ordinary sounds, you can connect your bass
directly to the input of the unit. Then, connect a second cable from the effects
output to the input on your bass amp.
BEHRINGER
EUROPOWER
EP1500
If you have an electronic tuner, please be sure to insert it pre effects device,
so that the tuner only receives a dry signal without effects components.
X V-AMP PRO: no additional tuner required.
BEHRINGER
Main
EUROLIVE B1520 PRO
Outputs
◊
The built-in loudspeaker is disabled automatically when you plug in
the headphones.
BEHRINGER
EURORACK
UB1222FX-PRO
Outputs
ADJUST
1
2
3
4
GAIN
/
VOLUME
Output
N
D
COPY
2
F
U
N
C
T
I
O
N
CONFIGURE
PEDAL
BASS EQ
PRESENCE
BEHRINGER
BASS V-AMP
Input
BYPASS/TUNER
CD Player
BEHRINGER X V-AMP
Input
BEHRINGER
HPS3000
XLR D.I.
Out
Instrument In
CD player
input
Instrument
input
Headphone
BEHRINGER
ULTRABASS BX1800
E-Bass
Fig. 2.2: Live setup
BEHRINGER
ULTRABASS BX1800
E-Bass
Fig. 2.1: Example of a setup using the ULTRABASS BX1800
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ULTRABASS BX1800 User Manual
3. Control Elements
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)
(16)
Fig. 3.1: Front view
(1) Connect your bass to the INPUT jack, using a standard cable with a
1" TS connector.
(15) Use the balanced D.I. OUT XLR output to feed the audio signal from your
ULTRABASS to an external mixing console. The D.I. OUT signal is post-EQ.
(2) Press the PAD switch when using active instruments with high output levels. (16) Use the POWER switch to switch the BX1800 on or off. You should always
In this case the INPUT jack features 6 dB less gain. For passive instruments
the PAD button has to be depressed.
make sure that the POWER switch is in the “Off” position when initially
connecting the unit to the mains.
(3) Pressing the SHAPE button will activate the Shape function. The Shape
function on your BX1800 provides a revolutionary type of filter that you can
use to modify your bass sound.
To disconnect the unit from the mains, pull out the main cord plug.
When installing the product, ensure that the plug is easily accessible.
◊
Please note: Merely switching the unit off does not mean that it
is fully disconnected from the mains. When not using the unit for
prolonged periods of time, please unplug the unit’s power cord from
the power outlet.
(4) Use the VOLUME control to adjust the volume of the instrument channel.
To change the balance between the instrument and CD volume level,
use your instrument’s volume control.
(5) The LOW control allows you to boost or cut the low-frequency range.
(6) Using the LOW MID control you can boost or cut the lower mids.
(7) The HIGH MID control allows you to boost or cut the upper mids.
(19)
(18)
(8) The HIGH control governs the high-frequency range to give your bass a more
“cutting” sound.
(9) Use the CD IN connectors to connect the output of your CD player, tape deck,
CD or MD walkman. This way you can play along to music or bass guitar
tutorial CDs.
(10) The BX1800 features an FX INSERT-Loop for external effects. Connect the
SEND output to the input of your effects device, for example, our proven
multi-effects processor BEHRINGER VIRTUALIZER PRO DSP2024P. This output
can also be used to connect your tuner.
(17)
(11) Connect the RETURN jack to the output of your effects device. Since the
BX1800 features a serial effects path, the mix ratio must be set on your
effects device.
Fig. 3.2 Rear view
(17) MAINS CONNECTION. Use the power cord supplied with the unit to connect
it to the mains.
(12) The PHONES jack is for headphones. When you plug in your headphones,
the built-in loudspeaker is muted.
(18) FUSE HOLDER/VOLTAGE SELECTOR. Before connecting the unit to the
mains, make sure that the voltage setting matches your local voltage.
A blown fuse should only be replaced by a fuse of the same type and rating.
On some units, the fuse holder can be switched to one of two positions,
i.e. 230 V and 120 V. When operating the unit outside Europe at 120 V,
a higher fuse rating is required.
◊
The headphone signal can also be routed to a mixing console or
sound reinforcement system. Connect the headphones output on
your BX1800 to the line input (LINE IN) on the console (for example,
BEHRINGER EURORACK UB1222FX-PRO). Please use a mono cable for
this application.
(19) SERIAL NUMBER.
◊
Some headphones produce distortion if the volume level is too high.
Please cut back the VOLUME control until the distortion disappears.
(13) Use the MASTER control to adjust the output level of the D.I. OUT output.
(14) The GND LIFT switch disconnects (switch pressed) the ground connection
at the D.I. OUT output to effectively eliminate hum noise resulting from
ground loops.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
ULTRABASS BX1800 User Manual
4. Audio Connections
5. Specifications
Except for the D.I. OUT output which is on a balanced XLR connector, your
BEHRINGER ULTRABASS BX1800 features 1" connectors on inputs and output.
More detailed information can be found in chapter 5, “Specifications.”
Audio Inputs
Active instrument input
Input impedance
Passive instrument input
Input impedance
Return
1" mono jack, unbalanced
approx. 220 kΩ unbalanced
1" mono jack, unbalanced
approx. 730 kΩ unbalanced
1" mono jack, unbalanced
approx. 15 kΩ unbalanced
RCA, unbalanced
◊
Please keep in mind that all the equipment has to be grounded at all
times. For your own protection, never change or disable the grounding
on your equipment or on the cables! The unit shall always be connected
to the mains socket outlet with a protective earthing connection.
Input impedance
CD input
Audio Outputs
Send
1" mono jack, unbalanced
min. 2 kΩ unbalanced
XLR connector, servo-balanced
approx. 100 Ω balanced
max. 0 dBu
Output impedance
D.I. Out
Output impedance
Output level
Fig. 4.1: 1" mono connector (TS) for the INPUT
System Data
Power amp output
180 Watts
Loudspeaker
High-power bass speaker
Tweeter
15" BUGERA Classic Tone Series
custom-made horn tweeter
Power Supply
Mains Voltages
U.S./Canada
120 V~, 60 Hz
Europe/U.K./Australia
China
230 V~, 50 Hz
Fig. 4.2: 1" stereo connector (TRS) for headphones
220 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
120/230 V~, 50 - 60 Hz
max. 290 W
General export model
Power consumption
Fuse
100 - 120 V~: T 6.3 A H 250 V
200 - 240 V~: T 3.15 A H 250 V
Mains connection
Standard IEC receptacle
Dimensions/Weight
Fig. 4.3: XLR connectors
Dimensions (H x W x D)
approx. 570 x 310 x 500 mm
(22.4 x 12.2 x 19.7")
Weight
approx. 24.6 kg (54.12 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or shown.
Fig. 4.4: RCA cable
Download from Www.Somanuals.com. All Manuals Search And Download.
We Hear You
Download from Www.Somanuals.com. All Manuals Search And Download.
|