Barco, Inc.
Toll Free: +1 (888) 414-7226
Fax: +1 (916) 859-2515
Technical Support: +1 (866) 374-7878
11101 Trade Center Drive
Rancho Cordova, CA
95670 • USA
Quick Start Guide
Visibly yours
RCP-120 Installation: System Connections
For detailed installation instructions, refer to Chapter 2 of
the RCP-120 User’s Guide.
Ethernet Switch
To FSN-1400
DC
Power
Script
Light
12V DC OUT
1.5A
Ethernet
Port 1
Ethernet
Port 2
AC
Power
RCP-120 Rear
Panel
Touch Screen
Connector Panel
USB
DVI-D
12V DC
FSN-150 Rear
Panel
Cable Harness
RCP-120 Setup
Understanding Button Color
Communications Setup — Make sure each RCP-120 has a
unique IP Address, compatible with the FSN network. Use a
computer attached to the same network to browse to the RCP-
120 Web Interface and change the IP Address if necessary.
Refer to Chapter 3 in the RCP-120 User’s Guide.
5
RCP-120 setup is comprised of 10 sequences,
each of which includes several steps.
Remote Panel Name — (Optional) Give the RCP-120 a
unique name. Browse to the RCP-120 Web Interface and
update the Host Name to uniquely identify each panel. Refer
to Chapter 3 in the RCP-120 User’s Guide.
For error-free setup, always refer to either the
FSN User’s Guide, indicated by the blue circles or the
RCP-120 Users Guide, indicated by the green circles.
6
7
Setup Panels in the FSN Controller — On the Assign
Remote Panels Menu, under the System, Other Setup Menu,
press {Discover Remote Panels} to search the FSN network
and populate the Remote Panel Table. Refer to Chapter 4 in
the RCP-120 User’s Guide.
General FSN System Setup — Follow the steps outlined in
Chapter 6 of the FSN User’s Guide to setup the FSN System
before connecting the RCP-120 devices.
1
Assign Aux Outputs — On the Assign Remote Panels Menu,
select the appropriate RCP-120 panel and press the {Assign
Aux} button. In the Select Aux Output Pop-up that appears,
select the Aux Output that will be controlled by this RCP-120.
Repeat this step for any additional devices. When finished,
press the {Close} button to clear the pop-up.
8
FSN Aux Setup — Refer to Aux Setup in Chapter 6 of the
FSN User’s Guide to configure the Aux Outputs on the FSN
system.
2
Saving the Setup — On the System Menu, press {Save All} to
save all system parameters to non-volatile memory, including
input and output setups, button mappings, tallies, user
preferences and more. Refer to Chapter 6 in the FSN User’s
Guide.
Verify Aux Output Configuration — Ensure the Aux Outputs
are working as expected by following the steps outlined in the
Working with Aux Buses section in Chapter 7 of the FSN
User’s Guide.
9
3
Install the RCP-120 Devices — Use a standard Ethernet
cable to connect the LAN port on the RCP-120 to the
Ethernet switch used to connect the FSN-1400 and Ethernet
Port 1 of the FSN Controller.
Backing up the System — Insert a USB drive into the USB
Port. On the Backup and Restore Menu, press {Backup
System} to back up the system setup and all memory registers.
Refer to Chapter 6 in the FSN User’s Guide.
4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
P/N 26-1004005-00, Rev 00
|
Abit Computer Hardware IC7 MAX3 User Manual
Acesonic Music Mixer AM 145 User Manual
ADTRAN Network Card 850 VoDSL User Manual
AllerAir Air Cleaner 5000 Sentinel M User Manual
Alliance Laundry Systems Washer UW35B2 User Manual
Altec Lansing Speaker VS3121 User Manual
Audiovox Speaker PSPL 10 User Manual
Axis Communications Security Camera P1346 User Manual
Baby Jogger MP3 Player MP3 Player User Manual
Beko Freezer CF393APW User Manual