Bang Olufsen Cable Box 26 Jun User Manual

BeoCenter 6–26

Reference book

Download from Www.Somanuals.com. All Manuals Search And Download.

Tables of contents in the Reference book

The contents of this Reference book is divided into sections. Each particular section

starts with its own detailed table of contents provided with page references. Texts

in black refers to the current section, whereas the remaining sections are described

in general terms and written in grey.

The main sections are:

– Advanced operation

– Tuning and preference settings

– Placement, sockets and connections

– BeoLink system

– Index

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu overview

The illustration on this page shows

the content of the menu system ,

and also indicates where in the

Reference book you can find further

information about the menus.

PROGRAM AND STATION GROUPS

OPTIONS

CONNECTIONS (p. 47)

TV TUNING (p. 26)

EDIT PROGRAMS

ADD PROGRAMS

AUTO TUNING

MANUAL TUNING

EXTRA

AV1

AV2

AV3

SOUND (p. 31)

VOLUME

BALANCE

BASS

FINE TUNE

DECODER

TREBLE

TV SYSTEM

LOUDNESS NO/YES

PICTURE (p. 30)

BRIGHTNESS

SOUND

RADIO TUNING (p. 26)

EDIT PROGRAMS

ADD PROGRAMS

AUTO TUNING

CONTRAST

COLOUR

TINT

MANUAL TUNING

RADIO DISPLAY

ADJUST DAB AERIAL

DAB DRC

CLOCK (p. 29)

TIME

DATE

MONTH

YEAR

MODULATOR (p. 63)

SYNCHRONISE

ON/OFF

BEOLINK (p. 56)

LINK FREQUENCY (p. 63)

LINKED RADIO

INTERNAL RADIO

MENU LANGUAGE (p. 32)

DANSK

FREQUENCY

PLAY TIMER (p. 8)

TIMER ON/OFF

TIMER INDEX

PLAY TIMER PROGRAMMING

SOURCE

DEUTSCH

ENGLISH

ESPAÑOL

FRANÇAIS

PROGRAM

ITALIANO

START TIME

NEDERLANDS

SVENSKA

STOP TIME

DAYS

WAKE UP TIMER (p. 6)

STAND POSITIONS (p. 28)

VIDEO

AUDIO

STANDBY

The extended on-screen menu system for the

television. The presence of the greyed menu items

depends on whether these optional extras are

available in your system.

Press MENU on Beo4 to access the main menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operation

This chapter tells you how to operate

your television beyond daily use.

•

Wake-up Timer, 6

Set the television to switch itself on and off, 8

Set-top box operation, 10

It also tells you how to operate a

connected set-top box and other

connected video equipment.

Use your television as a computer monitor, 12

Surround sound, 13

Tuning and preference settings, 15

Find out how to set up your television for the first time and tune in programs. This

chapter also contains information about settings for time, date, stand positions,

picture and sound.

Placement, sockets and connections, 35

Find out how to handle and place your television and where the sockets are placed.

Find out how to connect a decoder, set-top box or video recorder to your television

and how to register extra equipment. How to connect speakers and how to turn

your television into a surround sound system, including how to choose speaker

combinations.

BeoLink system, 55

Find out how to connect an audio system to your television and operate an

integrated audio/video system. Find out how to make link connections, operate a

link system and set up your television in a link room. Find out How to customise

Beo4 to your system.

Index, 68

Download from Www.Somanuals.com. All Manuals Search And Download.

Wake-up Timer

You can make the television wake

you up in the morning.

Enter a Wake-up Timer

You must choose the source and program

number of your Wake-up Timer as well as the

start time.

WAKE UP TIMER

The Wake-up Timer is a once-only

Timer, it lasts for one hour. Like an

alarm clock, it is disabled once it has

been executed. It applies only to the

television it has been programmed

on.

SOURCE

PROGRAM

START TIME

ON / OFF

21 BBC

07:00

To enter settings for a Wake-up Timer …

> Press MENU to bring up the TV SETUP menu

and press to highlight PLAY TIMER.

> Press GO to bring up the PLAY TIMER menu and

press to highlight WAKE UP TIMER.

> Press GO to bring up the WAKE UP TIMER

menu.

Once you have made one Wake-up

Timer, the television automatically

suggests the time you entered for the

latest Wake-up Timer when you enter

a new one.

store

> Press or to move through the menu items.

> Use the number buttons to enter information or

press or to view your choices for each item.

What’s on the WAKE-UP TIMER menu …

> When you have ﬁlled in the required information, SOURCE … Choose the source for your Wake-up

press GO to store your Wake-up Timer.

> Press EXIT to exit all menus.

Timer from the available sources in your system.

PROGRAM (Program number) … Choose the

program number you want.

Wake-up Timers can, of course, also

be disabled again.

START TIME … Key in the time when you want

the system to start playing.

When you have programmed a Wake-

up Timer, the television cannot be

part of an ordinary Play Timer or

Standby Timer until the Wake-up

Timer has been carried out or

disabled.

ON/OFF … Activate or deactivate your Wake-up

Timer. Choose ON to activate and OFF to

deactivate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Check or delete a Wake-up Timer

You can call up the settings for the Wake-up

Timer to check the time or to disable the

Wake-up Timer by setting it to OFF.

PLAY TIMER

TIMER ON / OFF

OFF

TIMER LIST

TIMER PROGRAMMING

To change settings for a Wake-up Timer or

delete it …

WAKE UP TIMER

07:00

> Press MENU to bring up the TV SETUP menu

and press to highlight PLAY TIMER.

> Press GO to bring up the PLAY TIMER menu and

press to highlight WAKE UP TIMER.

> Press GO to bring up the WAKE UP TIMER

menu.

select

> Press or to move through the menu items.

> Use or to change settings or enter a new

time with the number buttons. Change the ON/

OFF setting to OFF if you wish to delete the

Wake-up Timer.

> When you have made your changes, press GO

to store them.

> Press EXIT to exit all menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set the television to switch itself on and off

You can make your television switch

itself on and off automatically via the

timed play and timed standby

Before you start …

Timed play and timed standby

If you connect a Bang & Olufsen audio or video

product to your television with a Master Link

cable, you can exclude or include it in timed

functions via the Play Timer menu. For

You can preset your television to start and

stop automatically at the same time and day

every week.

functions, if, for example, there is a

programme you do not want to miss.

example, set the television’s Play Timer to ON To enter settings for timed play or timed

and an audio system’s Play Timer to OFF if you

wish timed functions to apply only to the

television.

standby …

Enter as many as six Timer settings,

and bring up an on-screen list of the

Timer settings you have entered.

From this list, you can edit or delete

your Timer settings.

> Press MENU to bring up the TV SETUP menu and

press to highlight PLAY TIMER.

> Press GO to bring up the PLAY TIMER menu and

press to highlight PLAY TIMER

To switch on the Play Timer …

> Press MENU to bring up the TV SETUP menu

and press to highlight PLAY TIMER.

> Press GO to bring up the PLAY TIMER menu,

and press or to highlight TIMER ON/OFF.

> Press GO to bring up the TIMER ON/OFF menu.

> Press or to reveal ON.

PROGRAMMING.

> Press GO to bring up the PLAY TIMER

PROGRAMMING menu.

If your television is integrated with a

Bang & Olufsen audio system with a

Master Link cable, these systems can

perform the timed play or timed

standby functions as well.

> Press or to move through the menu items.

> Use the number buttons to enter information or

press or to view your choices for each item.

When DAYS is highlighted, press once to be

able to move through the days, and press or

to remove a day you do not want. Press to

move to the next day, and press to move back

to a previous day. When the weekday(s) you

want are displayed, press GO to accept the

day(s).

> Press GO to store the setting.

For further information about how to switch the

Play Timer on or off for a connected Bang &

Olufsen audio or video product, refer to the Guide

enclosed with the product.

For your timed settings to be

executed correctly, ensure that the

built-in clock is set to the correct

time. For further information, refer to

the chapter ‘Set the time and date’

on page 29.

> When you have ﬁlled in the required information,

press GO to store your Timer settings.

> Press EXIT to exit all menus.

NOTE! If your television is set up in a link room,

Timer programming must be carried out on your

main room system.

Download from Www.Somanuals.com. All Manuals Search And Download.

View, edit or delete a Timer

Bring up an on-screen list of the settings you

have entered. From this list, you can edit or

delete your Timer settings.

TIMER PROGRAMMING

TV SETUP

PROGRAM GROUPS

SOURCE

PROGRAM

START TIME

STOP TIME

DAYS

18 BBC

15:40

16:40

TUNING

TIMER RECORDING

PLAY TIMER

OPTIONS

To view, edit or delete your Timer settings …

> Select TIMER INDEX from the TIMER SETUP

menu to bring up your list of Timer settings.

The ﬁrst Timer setting in the list is already high-

lighted.

TIMER SETUP

M . . TF . S

TIMER ON / OFF

TIMER INDEX

PLAY TIMER PROGRAMMING

STAND POSITIONS

. . .

TIMER ON / OFF

TIMER INDEX

PLAY TIMER PROGRAMMING

WAKEUP TIMER

OFF

> Press or to move the cursor to a Timer

setting you wish to edit.

15:40-16:40

^GB^OBC

TV 18

M . . TF . .

select

store

> To edit a setting, press GO and follow the

procedure described to the left.

select

> To be able to delete a selected setting, press the

yellow button.

PLAY TIMER INDEX

15:40-16:40

BBC

TV 18

M . . TF . .

> If you change your mind, press to move the

setting back into the list. You can also press

EXIT to exit all menus.

6:00 - 7:00

ZDF

MTWTF . .

> Press the yellow button a second time to delete

the setting.

20:00-22:00

CNN

TV 15

MT . . . S .

delete

edit

What’s on the TIMER PROGRAMMING

menu …

SOURCE

Abbreviations for days of the week:

Choose the source for your Timer from the

available sources in your system. Choose

STANDBY, if you want the television to switch

off. If you have other compatible video or audio

systems connected to your television, they are

switched off as well.

M … Monday

T …

Tuesday

W … Wednesday

T …

F …

S …

Thursday

Friday

Saturday

Sunday

PROGRAM (Program number) … Once your

source is chosen, choose the program number

you want.

START TIME and STOP TIME … Key in the times

when you want the system to start and/or stop

playing. If you have set the Timer source to

STANDBY, it is only possible to enter a stop time.

DAYS … Select the speciﬁc weekday(s) on which

you want your Timer executed. All the

weekdays will be displayed – starting with M for

Monday.

You can only use a source, such as A.MEM, if it is

present in your setup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set-top box operation

The built-in Set-top Box Controller

acts as an interpreter between a set-

top box of your choice and the Beo4

remote control. When a set-top box

is connected, you can use the Beo4

remote control to gain access to the

programs and functions offered by

your set-top box.

Set-top Box Controller menu

Some of the buttons on your set-top box

remote control are not immediately available

on Beo4. To ﬁnd out which Beo4 buttons

activate speciﬁc services or functions in your

set-top box, bring up the Set-top Box

Controller menu on the screen.

GUIDE

TEXT

INFO

WIDE

GUIDE

TEXT

Press to switch on the set-top

box

DTV

INFO

WIDE

Some functions are immediately

available via Beo4 when you switch

on the set-top box. Additional

functions are available through a

Set-top Box Controller menu that you

bring up on the screen.

Press to bring up the Set-top Box MENU

Controller menu

Example of a Set-top Box Controller menu – The

Beo4 buttons are shown to the left on the menu

and the set-top box buttons are shown to the right.

Press the number button that

activates the function you want,

or …

1 – 9

… press one of the coloured

buttons to activate a function

NOTE! If you television is equipped with the

optional DVB module, you activate a connected

set-top box with the V.AUX cue in the Beo4

display. If no DVB module is ﬁtted, you activate

your set-top box with the DTV button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Universal Beo4 operation

Use the set-top box’s own menu

Use a set-top box in a link room

If you know which Beo4 button activates the

function you want, you can activate the

function without bringing up the Set-top Box

Controller menu ﬁrst.

Once you have activated your set-top box,

When your set-top box is connected to the

you can operate the set-top box’s own menus, television in the main room, you can operate

such as the program guide, via Beo4.

the set-top box from the link room television.

However, the Set-top Box Controller menu

cannot be displayed on the television screen

in the link room.

While the set-top box’s own

menu is shown …

While your set-top box is

activated …

Moves the cursor up or down

Press GO and then the number

button that activates the

function you want

Press to switch on the set-top

box in the main room

DTV

1 – 9

Moves the cursor left or right

Press GO and then the number

button that activates the

function you want

Press one of the coloured

Selects and activates a function

1 – 9

buttons to activate a function

Press GO and then or to

step up or down through

programs directly

Press GO and then or to

step between menu pages or

step in program lists

Press one of the coloured

buttons to activate a function

Press and hold GO to bring up

the Program guide or the ‘Now/

Next’ banner on the screen

Exits menus, or returns to a

previous menu*

STOP

EXIT

depending on your set-top box

Exits menus, enters or exits

different modes, such as radio

Use the coloured buttons as

indicated in the menus of your

set-top box

*Depending on your set-top box,

you may have to press EXIT twice

instead of STOP to return to a

previous menu.

When set-top box is selected as

source, press MENU twice to

bring up the television’s main

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use your television as a computer monitor

If you connect your television to a

computer, as described on page 41,

you can use it as a monitor.

Bring up the computer image on the screen

To see the computer picture on the television

screen, you must bring it up with Beo4.

DVI SETUP

BRIGHTNESS 31

CONTRAST

COLOUR

IMPORTANT! If you wish to connect a

computer to the television and use the

television as a monitor, make sure that you

disconnect the television, the computer,

and all equipment connected to the

computer from the mains before you

connect the computer and the television

to each other.

To bring up the computer

picture …

Press repeatedly until PC appears

in the Beo4 display

LIST

Press to bring up the picture

When you have the computer picture on the

screen, you must call up the DVI SETUP menu to

make adjustments to brightness, contrast and

colour.

You can then operate the

computer as you normally would.

When in use, the computer must be

connected to a grounded wall outlet as

speciﬁed in the computer’s setting-up

instructions.

Picture adjustments …

> Press MENU to bring up the DVI SETUP menu.

> Press or to move between the menu

options.

> Press or to adjust settings.

> Press GO to store your settings and exit the

menu.

The settings you make in this menu only apply to

the PC setup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Surround sound

If your television is equipped with the

optional surround sound module,

you can extend your system in to a

surround sound system by adding

four Bang & Olufsen loudspeakers

and a BeoLab 2 subwoofer*.

Select speakers for movie sound

You can select the speaker combination that

suits the source you are using, provided that

the various sound modes are available in your

system.

Press repeatedly to display

SPEAKER on Beo4

LIST

SPEAKER

When you switch on one of the

sources, speakers in a surround

sound system can be cut in or out,

depending on what kind of sound

suits the source you are using.

Press the number of the speaker 1 – 5

combination you want. The

selected speakers cut in

automatically

Speaker combinations

SPEAKER 1 … Sound in the centre speaker only.

SPEAKER 2 … Stereo sound in the two front

speakers. The BeoLab 2 subwoofer is active.

SPEAKER 3 … The centre speaker, front speakers

and the BeoLab 2 subwoofer are active.

SPEAKER 4 … Enhanced stereo sound in the front

and rear speakers. The BeoLab 2 subwoofer is

active.

Press to adjust the balance

between the front and rear

speakers

Press to adjust the balance

between the left and right

speakers

SPEAKER 5 … Surround sound from all speakers

including the BeoLab 2 subwoofer. For

programmes encoded in Surround Sound.

Press to remove SPEAKER from

the Beo4 display and return to

the source you were using

EXIT

SPEAKER 4 and 5 are only available if your tele-

vision is equipped with the optional surround sound

module.

If you have added only two front

speakers to the television, you

will only be able to choose

SPEAKER 1–3.

*NOTE! For further information about how to

connect speakers to the television, refer to the

chapter ‘Loudspeaker setup – surround sound’ on

page 48.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning and preference settings

Find out how to perform the first-

time setup procedure and tune in all

available programs automatically. In

addition, you can find information

about how to edit tuned programs

and adjust other available settings,

such as time, date, picture and sound.

Advanced operation, 5

All you need to know about using your television beyond daily use, such as how to

operate timed play and timed standby functions, and a connected set-top box. How

to operate a surround sound system.

Tuning and preference settings, 15

•

First-time setup of your television, 16

Edit tuned programs, 20

For information about how to place

your television and connect

Re-tune or add programs, 26

Set positions for the television to turn to, 28

Set the time and date, 29

additional video equipment, refer to

the chapter ‘Placement, sockets and

connections’ on page 35.

Adjust picture and sound settings, 30

Choose menu language, 32

Choose radio display, 33

Placement, sockets and connections, 35

Find out how to handle and place your television and where the sockets are placed.

Find out how to connect a decoder, set-top box or video recorder to your television

and how to register extra equipment. How to connect speakers and how to turn

your television into a surround sound system, including how to choose speaker

combinations.

BeoLink system, 55

Find out how to connect an audio system to your television and operate an

integrated audio/video system. Find out how to make link connections, operate a

link system and set up your television in a link room. How to customise Beo4 to

your system.

Index, 68

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your television

The setup procedure described here is

activated only when the television is

connected to the mains and switched

on for the first time.

Select menu language

auto-tuning

MENU LANGUAGE

CONNECTIONS

DANSK

AV1

AV2

AV3

V. MEM

DVD

DEUTSCH

ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

You must select the menu language,

have connected, choose radio display,

determine the centre position for the

motorised stand – if you television is

equipped with one – and start the

automatic tuning of TV and radio

programs.

select

The ﬁrst time you switch on your television,

you must select which language you want all

the menus to be displayed in.

Some extra equipment is detected by the tele-

vision automatically. You can check and

conﬁrm the registration of the equipment

involved.

The menu language setup appears. If you wish to

change the menu language at a later date, you can

find the item under OPTIONS in the TV SETUP

menu.

When the CONNECTIONS menu appears …

> Press or to step between the different

socket groups: AV1, AV2 and AV3.

> Press GO to be able to register a connected

product to the highlighted socket group.

> Press or to move between the sockets in

the group.

> Press TV to switch on the television. The

language menu appears.

> Press or to move between the displayed

languages, if necessary.

> Press or to register what you have

connected to the highlighted socket.

> Press GO to be able to select another socket

group.

> Press GO to store your choice.

> When you have completed your settings, press

the green button to store the setup.

NOTE! The described functions of FM and DAB

radio are only available if your television is

equipped with the optional FM module or the FM/

DAB module.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select radio display

Store all programs and settings

RADIO DISPLAY

MAXIMUM

AUTO TUNE

STYLE

CHECK AERIAL CONNECTION

RADIO

GERNO VERSI FOLLOW EPIUM

RADIO

BBC CLASSIC

BBC National DAB

store

start

Before tuning in programs, you are prompted When you have made your selections, a menu

to select the display type you want to appear

on the television screen when you select radio

as your source.

for program tuning automatically appears on

the screen.

When the menu for auto tuning appears, the

prompt CHECK AERIAL CONNECTION appears to

remind you to check that your TV aerial and radio

aerial are properly connected.

When the DISPLAY SETUP menu appears …

> Press or to switch between available

settings. The chosen display type is shown in

the menu as you change settings.

> Press GO to store your choice.

> Press GO to start auto tuning. The television

tunes in all available programs.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> First-time setup of your television

Determine the centre position

If your television is equipped with the

optional motorised stand, the STAND

ADJUSTMENT menu appears on the screen.

Once the centre position is determined, select

your favourite positions for when the

television is switched on and in standby.

STAND ADJUSTMENT

CENTRE POSITION

When the STAND ADJUSTMENT menu

appears …

CALIBRATING . . .

> Press GO to start stand adjustment.

> If the adjustment is interrupted the text

‘ADJUSTMENT FAILED’ appears on the screen.

Remove obstacles preventing the television

from turning, and press GO to start adjustment

again.

> Once adjustment is complete, the text

‘ADJUSTMENT OK’ appears, followed by the

STAND POSITIONS menu.

> Move between the different stand positions;

VIDEO, AUDIO and STANDBY by means of

and and press GO to enter the menu.

> To turn the television, press or

Make sure that there is enough room for the tele-

vision to turn to the right and left.

> Press the green button to store each of the

positions.

For further information about stand positions,

refer to the chapter ‘Set positions for the tele-

vision to turn to’ on page 28.

Download from Www.Somanuals.com. All Manuals Search And Download.

Edit tuned programs

You can only store a total of 99 radio

programs, If automatic tuning of all

radio programs results in more than

99 programs, the EDIT RADIO

PROGRAMS menu appears

Move tuned radio programs

If automatic tuning results in more than 99

programs, the EDIT RADIO PROGRAMS menu

appear automatically.

EDIT RADIO PROGRAMS

91 DR P1

92 DR SOFT

93 . . . . . . . .

94 SKYRADIO

95 DR JAZZ

96 SR SOFT

97 . . . . . . . .

98 NRK JAZZ

99 . . . . . . . .

automatically after tuning. You must

then move the radio programs you

want to a position within 1 and 99 in

the list.

> Press to start editing your radio programs.

> Press or to select the program you wish to

move.

TOO MANY STATIONS!

MOVE WANTED STATIONS UP

TO THE NUMBERED PROGRAM

SLOTS

> Press once move the program out of the list.

> Press or to move the program to the

desired program number.

You can at any time rearrange the

order in which your radio and TV

programs appear, just call up the EDIT

RADIO PROGRAMS or EDIT TV

PROGRAMS menus to do so. These

menus also allow you to name and

delete radio and TV programs.

start

EDIT RADIO PROGRAMS

91 DR P1

> Press to make the program move back into

the list or change places with the program

which occupies the desired program number.

> Now, move the program which you changed

places with to an empty program number or to

a number already occupied and repeat the

procedure, or if you wish to delete the program,

simply press the yellow button when the

program is moved out of the list.

92 DR SOFT

93 . . . . . . . .

94 SKYRADIO

95 DR JAZZ

96 SR SOFT

97 . . . . . . . .

98 NRK JAZZ

99 . . . . . . . .

THEVOICE

GULD FM

. . . . . . . .

BBC POP

BBC JAZZ

KW5 HITS

. . . . . . . .

If the tuned programs require

> When you have moved the relevant programs,

press STOP to back up through all menus, or

press EXIT to exit all menus.

additional editing, such as fine tuning,

use the MANUAL TUNING menu.

move

delete

move

EDIT RADIO PROGRAMS

91 DR P1

92 DR SOFT

93 . . . . . . . .

94 GULD FM

95 DR JAZZ

96 SR SOFT

97 . . . . . . . .

98 NRK JAZZ

99 . . . . . . . .

THEVOICE

SKYRADIO

. . . . . . . .

BBC POP

BBC JAZZ

KW5 HITS

. . . . . . . .

move

delete

move

Note that all programs placed on unnumbered

program slots are deleted when you exit this menu.

NOTE! The described FM radio functions and DAB

radio functions are only available if your television is

equipped with the optional FM or FM/DAB module.

Download from Www.Somanuals.com. All Manuals Search And Download.

Move or delete tuned programs

At any time, you can move or delete any

Delete programs …

TV SETUP

PROGRAM GROUPS

tuned TV or radio programs you do not want. > Press TV to switch on the television, or RADIO

to switch on the radio.

TUNING

TV TUNING

EDIT PROGRAMS

Move programs …

> Press MENU to bring up the SETUP menu and

press to highlight TUNING.

TIMER RECORDING

PLAY TIMER

> Press TV to switch on the television, or RADIO

to switch on the radio.

ADD PROGRAM

AUTO TUNING

> Press GO to bring up the TUNING menu. EDIT

PROGRAMS is already highlighted.

> Press GO to bring up the EDIT PROGRAMS

menu.

OPTIONS

STAND POSITIONS

> Press MENU to bring up the SETUP menu, and

press to highlight TUNING.

MANUAL TUNING

LINK FREQUENCY

EDIT PROGRAM

ADD PROGRAM

AUTO TUNING

> Press GO to bring up the TUNING menu. EDIT

PROGRAMS is already highlighted.

> Press GO to bring up the EDIT PROGRAMS

menu.

1 DR1

2 TV2

> Press or to move to the program you wish

to delete.

3 .

select

> Press to move the program out of the list.

> Press the yellow button to be able to delete the

program – the program is then shown in red.

> Press the yellow button again to ﬁnally delete

the program, or press twice to move the

program back into the list.

EDIT TV PROGRAMS

> Press or to select the program you wish to

move.

DR1

TV2

. . . . . . . .

EUROSPRT

ZDF

RTL7

. . . . . . . .

BBC

> Press once to be able to move the program.

The program is now moved out of the list.

> Press or to move the program to the

desired program number.

> When you have deleted the relevant programs,

press EXIT to exit all menus.

. .

> Press to make the program move back into

the list or change places with the program

which occupies the desired program number.

> Now, move the program which you changed

places with to an empty program number or to

a number already occupied and repeat the

procedure.

17 NRK

18 TV4

name

move

EDIT TV PROGRAMS

DR1

TV2

. . . . . . . .

EUROSPRT

ZDF

RTL7

. . . . . . . .

BBC

> When you have moved the relevant programs,

press STOP to back up through all menus, or

press EXIT to exit all menus.

. .

17 NRK

18 TV4

move

delete

move

EDIT TV PROGRAMS

DR1

TV2

. . . . . . . .

EUROSPRT

ZDF

RTL7

. . . . . . . .

BBC

. .

17 NRK

18 TV4

move

delete

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Edit tuned programs

Name tuned programs

The EDIT PROGRAMS menu also allows you to

name all programs yourself.

TV SETUP

PROGRAM GROUPS

TUNING

TV TUNING

EDIT PROGRAMS

Name programs …

TIMER RECORDING

PLAY TIMER

> Press TV to switch on the television, or RADIO

to switch on the radio.

ADD PROGRAM

AUTO TUNING

OPTIONS

> Press MENU to bring up the SETUP menu, and

press to highlight TUNING.

STAND POSITIONS

MANUAL TUNING

LINK FREQUENCY

EDIT PROGRAM

ADD PROGRAM

AUTO TUNING

> Press GO to bring up the TUNING menu. EDIT

PROGRAMS is already highlighted.

> Press GO to bring up the EDIT PROGRAMS

menu.

1 DR1

2 TV2

3 .

select

> Press or to select the program you wish to

name.

EDIT TV PROGRAMS

> Press the green button to be able to name the

program. The naming menu is now activated.

> Press or to ﬁnd the individual characters in

the name.

DR1

TV2

. . . . . . . .

EUROSPRT

ZDF

RTL7

. . . . . . . .

BBC

> Press to move to the next character. As you

move, the television suggests possible names,

but you can still use and , or and to

enter or edit all the characters in the name you

choose.

. . . . . . . .

. .

17 NRK

18 TV4

name

EDIT TV PROGRAMS

DR1

move

> Press GO to store the name.

> If necessary, repeat the procedure and name

other program numbers.

ZDF

RTL7

. . . . . . . .

BBC

> When you have named the relevant programs,

press GO to accept your edited list, or press

EXIT to exit all menus.

. .

17 NRK

18 TV 4

character

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust tuned TV programs – manual tuning

You can store TV programs on program

numbers of their own. Fine tune the program

reception, indicate the presence of coded

programs and choose appropriate sound

types for the individual programs.

If the item SYSTEM appears on the menu, then

TV SETUP

PROGRAM GROUPS

make sure that the correct broadcast system is

displayed before you begin tuning:

B/G … for PAL/SECAM BG

TUNING

TV TUNING

EDIT PROGRAMS

TIMER RECORDING

PLAY TIMER

OPTIONS

I …

for PAL I

ADD PROGRAM

AUTO TUNING

L …

for SECAM L

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight TUNING.

M … for NTSC M

STAND POSITION

MANUAL TUNING

LINK FREQUENCY

D/K … for PAL/SECAM D/K

EDIT PROGRAM

ADD PROGRAM

AUTO TUNING

FREQUENCY

PROGRAM NUMBER

> Press GO to bring up the TV TUNING menu and

press to highlight MANUAL TUNING.

> Press GO to bring up the TV MANUAL TUNING

menu.

If programs are broadcasted with two languages

and you want both languages, you can store the

program twice, once with each language.

select

TV MANUAL TUNING

> Press or to move between items on the

menu.

Even though you store a type of sound/language,

you can switch between the various types while

watching a TV programme. For further information,

refer to the chapter ‘Adjust sound and picture

format’ on page 8 in the Guide.

. . .

FREQUENCY

PROGRAM NUMBER

NAME

210

> Press or to view your choices for each item.

> If you choose NAME, then press the green button

to start the naming procedure. Use or and

to enter the characters in the name you

choose.

DR1

EXTRA

start

store

> To bring up the extra TV MANUAL TUNING

menu, move to EXTRA and press GO. Now ﬁne

tune if relevant, or select type of sound.

> When you have ﬁnished editing, press GO to

accept the settings.

TV MANUAL TUNING

FINE TUNE

DECODER

TV SYSTEM

SOUND

OFF

B / G

STEREO

accept ^GO

> Press GO to store the adjusted program.

> Press EXIT to exit all menus.

TV MANUAL TUNING

. . .

FREQUENCY

PROGRAM NUMBER

NAME

210

DR1

EXTRA

TUNING STORED

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Edit tuned programs

Adjust tuned FM or DAB programs – manual tuning

If your television is equipped with the

optional FM or FM/DAB module, you can

tune in FM and DAB radio programs. During

ﬁrst time setup both types of radio programs

are tuned in.

What’s on the FM RADIO TUNING menu …

FM/DAB … Choose between FM and DAB.

SEARCH … Start searching the frequency band up

or down.

RADIO MANUAL TUNING

FM / DAB

92.6

. . .

FREQUENCY

FREQUENCY … Select a frequency to tune in.

PROGRAM NUMBER … Store or change program

number. You can store a total of 99 radio

programs.

PROGRAM NUMBER 10

NAME

STRUER

> Press RADIO to switch on the radio.

> Press MENU to bring up the SETUP menu and

press to highlight TUNING.

FINE TUNE

SOUND

STEREO

NAME … Access the naming function and name

the program you have selected.

> Press GO to bring up the RADIO TUNING menu

and press to highlight MANUAL TUNING.

> Press GO to bring up the RADIO MANUAL

TUNING menu.

store

FINE TUNE … Fine tune the frequency of a

program or tuned program. You can ﬁne tune

within the range of -4 – +4.

> Press or to move between items on the

menu.

SOUND … Choose between stereo or mono. The

receiver will switch automatically to Mono

sound if the Stereo signal is affected by noise.

> Press or to view your choices for each item.

> When you switch between FM and DAB the

menu changes appearance.

What’s on the DAB RADIO TUNING menu …

FM/DAB … Choose between FM and DAB.

SEARCH … Start searching the frequency band up

or down.

RADIO MANUAL TUNING

> If you choose NAME, then press the green

button to start the naming procedure. Use

or and to enter the characters in the

name you choose.

FM / DAB

DAB

. . .

CHANNEL

12 C

CHANNEL … Select a channel to tune in. Enter

the channel number by means of the number

buttons, change between letters by means of

the arrow buttons left and right.

DR DAB

> When you have ﬁnished editing, press GO to

accept the settings.

PROGRAM

DR SOFT

PROGRAM NUMBER 10

NAME DR SOFT

> Press GO to store the adjusted program.

> Press EXIT to exit all menus.

(ENSEMBLE) … This ﬁeld informs you of the found

ensemble, no selection can be made here.

PROGRAM … Choose between different

programs within the found ‘ensemble’.

PROGRAM NUMBER … Store or change program

number. You can store a total of 99 radio

programs.

store

NAME … Access the naming function and name

the program you have selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

What’s on the ADJUST DAB AERIAL menu …

When an ‘ensemble’ has been found, this menu

can be used to optimise signal reception.

The ‘ADJUST DAB AERIAL’ menu helps you find

the best placement for your dab aerial.

ADJUST DAB AERIAL

..............................................................

DR DAB

CHANNEL

12 C

Turn your DAB aerial to a position where the bar is

as filled out as possible.

The bar at the top of the menu shows the

reception quality.

If no ensembles have been found, you can enter a

channel number by means of the number buttons,

change between letters by means of the arrow

buttons left and right, and then move the DAB

aerial until an ‘ensemble’ name appears in the

menu.

What’s on the DYNAMIC RANGE CONTROL

menu …

DYNAMIC RANGE CONTROL

OFF

MIDDLE

MAX

For certain DAB programs, you can adjust audio

signal compression with the DRC (Dynamic Range

Control) function. Compression compensates for

sources of noise in your immediate surroundings.

There are twelve possible settings, with three

values to guide you:

...........................................................................

OFF (no compression)

store

MIDDLE (recommended by the DAB provider)

MAX (maximum compression, twice that

recommended by the DAB provider).

Digital Audio Broadcast (DAB) providers broadcast

programs in groups called ensembles. A channel

contains a single ensemble, and an ensemble

typically contains 5–10 programs. Some DAB

providers call an ensemble a ‘multiplex’, or call a

program a ‘service’.

DAB BAND III

DAB DRC menu settings have no effect for programs

not broadcast with DRC.

174.928MHz

239.200MHz

5A 5B 5C 5D 6A - - -

Channels

- - - 12A 12B 12C 12D - - - 13F

DR NEWS

DR SOFT

DR ROCK

…

Ensemble

…

DR BOOGIE

DR SPORT

Download from Www.Somanuals.com. All Manuals Search And Download.

Re-tune or add programs

You can make your television find

your TV and radio programs for you.

Re-tune via automatic tuning

You can re-tune all your TV and radio

programs by letting the television tune in all

the programs automatically.

TV SETUP

PROGRAM GROUPS

Preset up to 99 different TV and

radio programs on program numbers

of their own and give each program

a distinct name.

TV TUNING

EDIT PROGRAMS

TUNING

TIMER RECORDING

PLAY TIMER

> Press TV to switch on the television, or RADIO

to switch on the radio.

ADD PROGRAM

AUTO TUNING

MANUAL TUNING

LINK FREQUENCY

OPTIONS

STAND POSITIONS

> Press MENU to bring up the SETUP menu and

press to highlight TUNING.

EDIT PROGRAMS

ADD PROGRAM

AUTO TUNING

You can tune in new programs, for

example, if you move – or re-tune

previously deleted programs.

> Press GO to bring up the TUNING menu and

press to highlight AUTO TUNING.

> Press GO to bring up the AUTO TUNING menu.

> Press to start auto tuning.

1 DR1

2 TV2

3 .

select

When tuning in programs via the

ADD PROGRAM menu, your

> Once auto tuning is completed, the EDIT

PROGRAMS menu appears. You can then

rearrange the program order, delete programs

or rename them.

TV AUTO TUNING

. . . . . . . .

previously tuned programs are left

unchanged. This allows you to keep

program names, their order in the TV

or radio lists, and any special settings

you may have stored for those

programs, such as decoder or

broadcast system settings.

DELETES PROGRAM GROUPS

start

TV AUTO TUNING

DR1

TV2

. . . . . . . .

EDIT TV PROGRAMS

DR1

TV2

. . . . . . . .

EUROSPRT

ZDF

RTL7

. . . . . . . .

BBC

. . . . . . . .

. .

17 NRK

18 TV4

name

move

Please note: If you re-tune all your TV and radio

programs, all Groups of programs and program

settings, you have made, disappear!

Download from Www.Somanuals.com. All Manuals Search And Download.

Add new programs

You can add a new program or update a

tuned program which, for example, has been

moved by the broadcaster.

TV SETUP

PROGRAM GROUPS

TUNING

TV TUNING

EDIT PROGRAMS

TIMER RECORDING

PLAY TIMER

> Press TV to switch on the television, or RADIO

to switch on the radio.

ADD PROGRAM

AUTO TUNING

OPTIONS

> Press MENU to bring up the SETUP menu and

press to highlight TUNING.

STAND POSITIONS

MANUAL TUNING

LINK FREQUENCY

EDIT PROGRAM

ADD PROGRAM

AUTO TUNING

> Press GO to bring up the TUNING menu and

press to highlight ADD PROGRAM.

> Press GO to bring up the ADD PROGRAM menu.

> Press to start. New programs are added

automatically as they are found.

19 . . . . . . . .

20 . . . . . . . .

21 . . . . . . . .

select

> When tuning is completed and new programs

have been added, the EDIT PROGRAMS menu

appears. You can then rearrange the program

order, delete programs or rename them. The

cursor highlights the ﬁrst new program of those

just added to the list.

ADD TV PROGRAM

10 . . . . . . . .

11 . . . . . . . .

12 CNN

13 N3

14 . . . . . . . .

15 SAT 1

16 SVT 2

17 NRK

18 TV4

19 . . . . . . . .

start

Download from Www.Somanuals.com. All Manuals Search And Download.

Set positions for the television to turn to

Choose one position for when you switch the

If your television is equipped with the

optional motorised stand, you can

turn it using the Beo4 remote control.

TV SETUP

television on, one for radio and one for when

you switch it off.

PROGRAM GROUPS

TUNING

TIMER RECORDING

PLAY TIMER

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight STAND POSITIONS.

> Press GO to bring up the STAND POSITIONS

menu.

Furthermore, you can program the

television to turn automatically to

face your favourite viewing position

when you switch on the television,

turn to a different position when you

listen to radio, and turn away to a

standby position when you switch it

off.

OPTIONS

STAND POSTIONS

STAND POSITIONS

VIDEO

TV ON

AUDIO

TV STANDBY

STANDBY

> Press GO to determine the VIDEO position.

> Press or to turn the television, and place it

according to your viewing position.

> Press GO to store the position.

select

To store a stand position for when the radio

is switched on …

You can also turn your television by

hand.

select

> Press to move to AUDIO.

> Press GO to determine the AUDIO position.

> Press or to turn the television, and place it

as you wish.

To store a stand position for when the

television is switched off and in standby …

> Press to move to STANDBY.

> Press GO to store the position.

> Press GO to determine the STANDBY position.

> Press or to turn the television, and place it

as you wish.

> Press GO to store the position.

> Press EXIT to leave the menus.

NOTE! For information about ﬁrst-time installation

of the motorised stand, refer to the chapter ‘First-

time setup of your television’ on page 16.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set the time and date

Before synchronising the clock with a tuned

program, make sure that the program you

are watching offers a teletext service.

When you preset your television to

switch itself on or off at a particular

time, or when you preset a timed

recording of a programme on a

connected video recorder, the clock

ensures that these features are

switched on and off at the right

times.

TV SETUP

PROGRAM GROUPS

TUNING

TIMER RECORDING

PLAY TIMER

OPTIONS

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

OPTIONS

CONNECTIONS

STAND POSITIONS

> Press GO to bring up the OPTIONS menu and

press to highlight CLOCK.

SOUND

PICTURE

CLOCK

CONNECTIONS

SOUND

PICTURE

> Press GO to bring up the CLOCK menu.

> Press or to see your choices for each item.

> Press or to move through menu items. It is

only necessary to enter the time manually if

SYNCHRONISE is set to NO.

MENU LANGUAGE

select

TIME

DATE

MONTH

The simplest way to set the clock is to

synchronise it with a tuned TV

program’s teletext service via the

CLOCK menu. If you choose to

synchronise the clock, this is done

with the teletext service offered by

the TV program you are currently

watching. If a teletext service is not

available, you can set the clock

manually.

select

> Press GO to store your clock and calendar

options, or …

CLOCK

TIME

20:00

> … press EXIT to exit all menus without storing.

DATE

MONTH

APR

2001

If the clock is not updated in the transition between

summer and winter time, simply select the program

with which you originally synchronised the clock,

and the clock is updated.

YEAR

SYNCHRONISE

SHOW CLOCK

YES

store

Abbreviations for months

To bring up the clock in the display, press

LIST repeatedly to display CLOCK* on

Beo4, then press GO. To remove the clock

again, repeat the procedure.

Jan … January

Feb … February

Mar … March

Apr … April

Jul … July

Aug … August

Sep … September

Oct … October

May … May

Nov … November

Dec … December

Jun … June

*NOTE! In order to display CLOCK on Beo4, you

must ﬁrst add it to the Beo4 list of functions. For

further information, refer to the chapter

‘Customise Beo4’ on page 66.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust picture and sound settings

Picture and sound settings are preset

from the factory to neutral values

which suit most viewing and listening

situations. However, if you wish, you

can adjust these settings to your

liking.

Change brightness, colour or contrast

Adjust the picture settings via the PICTURE

menu. Temporary settings are cancelled

when you switch off the television.

TV SETUP

PROGRAM GROUPS

TUNING

TIMER RECORDING

PLAY TIMER

OPTIONS

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

OPTIONS

CONNECTIONS

STAND POSITIONS

Adjust picture brightness, colour or

contrast. Sound settings include

volume, bass and treble.

> Press GO to bring up the OPTIONS menu and

press to highlight PICTURE.

CONNECTIONS

SOUND

PICTURE

SOUND

PICTURE

CLOCK

> Press GO to bring up the PICTURE menu.

> Press or to move through menu items.

> Press or to adjust the values.

MENU LANGUAGE

select

BRIGHTNESS

CONTRAST

COLOUR

Store your picture and sound settings

temporarily – until your television is

switched off – or store them

permanently.

> Press EXIT to store your settings until you

switch off the television, or …

select

> … press GO to store your settings permanently.

PICTURE

BRIGHTNESS

CONTRAST

COLOUR

. . . . . . . .

To temporarily remove the picture from the screen,

press LIST repeatedly to display P.MUTE on Beo4,

then press GO. To restore the picture again, press

any source button, such as TV.

For information about how to change

the picture format, refer to the Guide

page 9.

TINT

store

What’s on the PICTURE menu …

BRIGHTNESS … Adjusts the picture brightness.

CONTRAST … Adjusts the contrast level in the

picture.

COLOUR … Adjusts the colour intensity in the

picture.

For video sources using the NTSC signal, a fourth

option – Tint (colour shade or nuance) – will be

available for adjustment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Change volume, bass or treble

Adjust the sound settings via the

What’s on the SOUND SETUP/SOUND

ADJUSTMENT menu …

TV SETUP

PROGRAM GROUPS

SOUND SETUP menu. Temporary settings are

cancelled when you switch off the television.

VOLUME … Adjusts the volume level the TV uses

when you switch it on.

TUNING

TIMER RECORDING

PLAY TIMER

OPTIONS

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

(CENTRE) … Only available if you have connected

loudspeakers to the television. Adjusts the

balance between the external and internal

speakers.

OPTIONS

CONNECTIONS

STAND POSITIONS

> Press GO to bring up the OPTIONS menu and

press to highlight SOUND.

CONNECTIONS

SOUND

PICTURE

SOUND

PICTURE

CLOCK

(BALANCE) … Adjusts the balance between the

speakers.

> Press GO to bring up the SOUND menu.

> Press or to move through menu items.

> Press or to adjust the values or choose a

setting.

MENU LANGUAGE

select

BASS … Adjusts the bass level.

VOLUME

BALANCE

BASS

TREBLE … Adjusts the treble level.

LOUDNESS … The loudness feature compensates

for the human ear’s lack of sensitivity to high

and low frequencies. These frequencies are

boosted at low volume levels so that low music

becomes more dynamic. Loudness can be set to

ON or OFF.

select

> Press EXIT to store your settings until you switch

off the television, or …

SOUND SETUP

> … press GO to store your settings permanently.

VOLUME

BALANCE

BASS

. . . . . . . .

If you connect loudspeakers or headphones …

The content of the SOUND menu varies according

to what you have connected to the television.

TREBLE

The contents of this menu varies according to your

speaker setup.

LOUDNESS

store

Download from Www.Somanuals.com. All Manuals Search And Download.

Choose menu language

You can select the language for on-screen

menus via the TV SETUP menu. The text on

the screen changes as you move from

language to language.

The menu language you choose

during the first-time setup of your

television can be changed at any

time.

TV SETUP

PROGRAM GROUPS

TUNING

TIMER RECORDING

PLAY TIMER

OPTIONS

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

OPTIONS

CONNECTIONS

Once a menu language is chosen, all

menus and display messages are

shown in this language.

STAND POSITIONS

CONNECTIONS

SOUND

PICTURE

SOUND

PICTURE

CLOCK

> Press GO to bring up the OPTIONS menu and

press to highlight MENU LANGUAGE.

> Press GO to bring up the MENU LANGUAGE

menu.

MENU LANGUAGE

select

DANSK

DEUTSCH

ENGLISH

> Use and to move to your language choice.

> Press GO to make your choice.

select

> Press STOP to back up through previous menus

or press EXIT to exit all menus directly.

MENU LANGUAGE

DANSK

DEUTSCH

ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

select

Download from Www.Somanuals.com. All Manuals Search And Download.

Choose radio display

> Press RADIO to switch on the radio.

> Press MENU to bring up the RADIO SETUP

menu and press to highlight TUNING.

> Press GO to bring up the RADIO TUNING menu

and press to highlight RADIO DISPLAY.

> Press GO to bring up the RADIO display menu.

> Press or to change the settings.

You can change the radio display at

any time. Your choice determines

what is shown on the screen, when

you select radio as your source.

RADIO SETUP

TUNING

RADIO TUNING

EDIT PROGRAMS

TIMER RECORDING

PLAY TIMER

ADD PROGRAM

AUTO TUNING

MANUAL TUNING

RADIO DISPLAY

ADJUST DAB AERIAL

DAB DRC

OPTIONS

STAND POSITIONS

When you change the radio display

style in the RADIO DISPLAY menu, a

sample of the display style is shown

in the menu.

EDIT PROGRAMS

ADD PROGRAMS

AUTO TUNING

> Press GO to store your choice.

> Press STOP to back up through previous menus

or press EXIT to exit all menus directly.

select

What’s on the RADIO DISPLAY menu …

STYLE … Select the display settings for when you

listen to radio. Options are:

RADIO DISPLAY

MAXIMUM

STYLE

MAXIMUM … Shows text sent out by the

broadcaster continuously, as well as radio

program number, name of the radio program,

frequency or ‘ensemble’ name.

GERNO VERSI FOLLOW EPIUM

RADIO

BBC CLASSIC

BBC National DAB

TIME OUT … Shows the maximum display but

removing the display when the text sent out by

the broadcaster has been shown once*.

MINIMUM … Shows the radio program number

and the name of the radio program.

store

OFF … No display in radio mode.

*NOTE! If you have chosen the radio display style

‘TIME OUT’, you can bring up the radio display

brieﬂy on the screen by pressing GO,

Download from Www.Somanuals.com. All Manuals Search And Download.

Placement, sockets and connections

In this chapter, you can find out how

to place and connect your television.

It also gives you an overview of the

socket panels.

Advanced operation, 5

All you need to know about using your television beyond daily use, such as how to

operate timed play and timed standby functions, and a connected set-top box. How

to operate a surround sound system.

We recommend that you follow the

procedure described below when

you set up your television:

– Unpack the television

Tuning and preference settings, 15

Find out how to set up your television for the first time and tune in programs. This

chapter also contains information about settings for time, date, stand positions,

picture and sound.

– Consider the appropriate

surroundings for your television

– Mount the television on the

chosen stand or bracket

Placement, sockets and connections, 35

•

Set up your television, 36

Camera and headphones sockets, 39

Socket panel, 40

– Place the television

Connect additional video equipment, 42

Loudspeaker setup – surround sound, 48

– Connect the cables, additional

equipment, and speakers

This procedure is described in detail

on the following pages.

BeoLink system, 55

Find out how to connect an audio system to your television and operate an integrated

audio/video system. Find out how to make link connections, operate a link system

and set up your television in a link room. How to customise Beo4 to your system.

Index, 68

Download from Www.Somanuals.com. All Manuals Search And Download.

Set up your television

Handling your television

For information about how to fasten

and run the cables on the rear of the

television, refer to page 38.

– Avoid placing your television in direct sunlight

or direct artiﬁcial light, such as a spotlight, as

this may reduce the sensitivity of the remote

control receiver. Also if the screen is overheated,

black spots may appear in the picture. These

spots disappear again, once the television cools

down to normal temperature.

For further information about the

socket panel, refer to page 40.

– To avoid injury, use Bang & Olufsen stands or

brackets only.

– Make sure that the television is set up, placed

and connected in accordance with these

instructions.

If you have a motorised stand, leave enough space

around the television to allow it to turn freely. The

television can also be turned by hand.

– The television is developed for indoor use in dry,

domestic environments only. Use within a

temperature range of 10–40°C (50–105°F).

– Do not place any items on top of the television.

– Always place your television on a ﬁrm and

stable surface.

– Do not attempt to open the television. Leave

such operations to qualiﬁed service personnel.

Overview of socket panels

1 Cover for fastening bracket for the optional

stand and wall bracket. Pull out at the bottom

to remove the cover.

2 Main socket panel. Refer to page 40 for further

information.

3 Cover for DVI socket for connection of a

computer. Refer to page 41 for further

information.

4 Cover for main socket panel. Pull out at the

bottom to remove the cover.

5 Cover for optional card reader for access to DVB

programs.

6 Cover for camera and headphones sockets.

Push in to open, push again to close.

7 Cable groove. It is important that the cables are

lead through the groove and tied with a cable

tier, as the cables can otherwise be tugged free

of the sockets. Refer to page 38 for further

information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Placement options

The television can be placed in several ways, some

are illustrated to the right. Please contact a Bang

& Olufsen retailer for further information.

If you mount the television on one of the

motorised stands or on the wall bracket, you can

tilt the television up and down, as well as turn it

left and right. Note, however, that tilting can only

be done manually.

While mounting the television on the base, stand

or wall bracket, you can use the packaging to

support the products. This makes mounting easier.

For further information, refer to the Guide

enclosed with these accessories.

Attaching the speaker cover: Hold up the

speaker cover slightly to the right of the ‘brackets’

a and b. Now slide the cover to the left to let the

‘attach-points’ engage with the corresponding

‘brackets’ (a, b and c) on the television.

To remove the cover; use your thumb to push the

cover to the right to disengage it, then lift it out.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Set up your television

Aerial and mains connections

When you set the television up on its own,

simply connect the TV aerial to the TV socket

and a FM aerial to the socket marked FM and

connect the television to the mains as shown

to the right.

If your television is equipped with the

optional DAB module, you must connect a

DAB aerial also.

When using a DAB aerial …

– Use the DAB AERIAL ADJUSTMENT menu,

described on page 23, to ﬁnd out where to

place your aerial. The menu lets you know how

strong the DAB signal is.

DAB

– Make sure that you hang or mount the aerial

vertically.

If you are going to connect speakers, an audio

system or any other equipment to the television,

do not connect it to the mains yet!

When connections are complete and the cables

have been secured as described on this page,

switch on the mains. A tiny, red light appears

below the screen. The system is in standby mode

and ready to be used. If your television is set up

IMPORTANT! All the cables must be fastened to

the television using the enclosed cable tier as

shown.

The supplied mains cord and plug are specially

designed for the television. If you change the plug

When you have made all the connections and

fastened the cables, mount the cable cover again.

or in any way damage the mains cord, it will affect on its own, you can now tune in programs as

the TV picture adversely!

explained in the chapter ‘First-time setup of your

television’ on page 16.

Your television was designed to be left in standby

mode when not in use. Therefore, to facilitate

remote control operation, it is essential that you

do not disconnect it from the mains. The

television can only be switched off completely, if

you disconnect it from the mains.

Download from Www.Somanuals.com. All Manuals Search And Download.

Camera and headphones sockets

You can connect headphones and

listen to a programme, or you can

connect a Camcorder and watch your

home movies on the television. If you

have connected a BeoCord V 8000

video tape recorder, you can copy

Camcorder recordings onto a

videotape.

Sockets for temporary connections

PHONES

You can connect stereo headphones to the socket

marked PHONES. The television speakers are

muted when headphones are connected and

activated again when the headphones are

disconnected.

PHONES

VIDEO

These sockets are for the connection of a

Camcorder:

VIDEO

Watch and copy from a Camcorder

For the video signal.

If you have connected a video tape recorder, such

as a BeoCord V 8000, to your television, and you

connect your Camcorder, you can copy Camcorder

recordings onto a videotape.

R – L

For audio connection (right and left sound channel

respectively).

To copy a recording from a Camcorder …

> Connect your Camcorder and start playback on

the Camcorder. The television automatically

registers the signal and you can see the pictures

on the television screen.

Watch digital pictures on your television

To watch your camera pictures, connect the camera

and switch the television on. The television auto-

matically registers the signal and you can see the

still pictures on the screen.

> Press RECORD twice to start recording.

If the signal from the camera is switched

off …

Choosing another source or switching off the tele-

vision during recording from a Camcorder disrupts

recording. It is not possible to view TV programs

during recording.

> Press LIST repeatedly to display CAMERA on

Beo4 and press GO.

In order to display CAMERA on Beo4, you must

first add it to the Beo4 list of functions. For further

information, refer to the chapter ‘Customise Beo4’

on page 66.

Download from Www.Somanuals.com. All Manuals Search And Download.

Socket panel

The socket panel on your television

allow you to connect signal input

cables as well as a variety of extra

equipment, such as a video recorder

or a linked Bang & Olufsen music

system.

Sockets on the rear panel

AV3

Left, line signal (for sound from PC).

STAND

Right, line signal (for sound from PC).

AV2

AV1

AV3

Y – Pb – Pr

The AV sockets are the primary

sockets for connection of extra

equipment. Any equipment you

connect to these sockets must be

registered in the CONNECTIONS

menu. For further information, refer

to the chapter ’First-time setup of

your television’ on page 16.

For connection of external equipment.

LINK

Aerial output socket for distribution of video

signals to other rooms. Requires an RF Link

Ampliﬁer also.

DAB

MASTER LINK

POWER LINK

IR-

OUT

LINK

DVB DATA

For service use.

DVBS

DATA

FRONT

A 1

You can also connect a computer and

use your television as a monitor.

Connections to the mains.

DAB

Aerial input socket for DAB aerial. Only available if

your television is equipped with the optional FM/

DAB module.

REAR

SUBWOOFER

REAR

A 2

AV1 (AV VMEM)

21-pin socket for the connection of a Bang &

Olufsen video recorder, a set-top box, a decoder

or another video tape recorder. You can also

connect other types of extra equipment.

Aerial input socket from your external aerial or

cable TV network, or from your main room

television if this television is placed in a link room.

FM/DVB

MASTER LINK

Aerial input socket from your FM or DVB aerial.

Only available if your television is equipped with

the optional FM module or DVB module.

Socket for connection of a compatible Bang &

Olufsen music system.

The socket is also used for BeoLink distribution of

sound throughout the house.

STAND

For connection of a motorised stand.

POWER LINK

For connection of external Bang & Olufsen loud-

speakers.

AV2 (AV)

21-pin socket for the AV connection of other

equipment, such as a DVD player, a set-top box, a

second decoder or a game console.

The socket may be used for an AV 2 Expander

instead, which gives the opportunity to connect

other non-Bang & Olufsen video equipment at the

same time.

IR out

For a connected set-top box.

Download from Www.Somanuals.com. All Manuals Search And Download.

Computer connection – DVI socket

The speaker and digital sockets mentioned

below are only available, if your television is

equipped with the optional Surround Sound

module:

Disconnect the television, the computer, and

all equipment connected to the computer

from the mains.

DVI

Using the appropriate type of cable, connect

one end to the DVI or VGA output socket on

your computer, and the other end to the DVI

socket on the television.

REAR

The two sockets are used for connecting the

external rear speakers in a surround sound setup.

DVI

DVI connection for receiving digital or analogue

graphics from an external PC. Supports the

following resolutions: 60 Hz; 640 × 480, 800 × 600,

848 × 480, 1024 × 576, 1024 × 768, 1280 × 720,

1360 × 768.

FRONT

To hear sound from the computer in the tele-

vision speakers, use the appropriate cable and

The two sockets are used for connecting the

external front speakers in a surround sound setup. connect the sound output on the computer

to the L – R sockets on the television.

SUBWOOFER

IMPORTANT! If you wish to connect a computer to

the television and use the television as a monitor,

make sure that the television, the computer, and

all equipment connected to the computer are all

disconnected from the mains before you connect

the computer and the television to each other.

Socket used for connecting a BeoLab 2 subwoofer Reconnect the television, the computer, and

in a surround sound setup.

all equipment connected to the computer to

the mains.

A1 – A2

For digital sound input from external equipment

connected to an AV socket group.

In addition, the computer must be connected to a

grounded wall outlet as specified in the computer’s

setting-up instructions.

If you have connected HD equipment to your

television, some video functions are affected:

– The Set-top Box Controller menu described

on page 8 does not appear;

– If you have selected FORMAT 2 for letter-box

pictures as described on page 11 in the

Guide, you cannot scroll the picture up or

down;

– You cannot distribute sound or picture from

a HD source to a product in a link room;

– You cannot record an HD source, unless your

HD equipment also provides a Standard

Definition (SD) signal;

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect additional video equipment

Connect a decoder

This chapter describes how to

connect additional video equipment

to the television.

BeoCenter

Primary decoder

A decoder can be connected to the

television via the AV2 socket. If your

setup also includes a Bang & Olufsen

video recorder, you should connect

the decoder to the video recorder.

Secondary decoder

A set-top box can be connected to

any of the AV sockets.

When you connect a Bang & Olufsen

video recorder, you must connect it

to the AV1 socket, the television

detects the connection automatically.

Disconnect all involved systems from the

mains before you connect external

equipment.

Tuned programs and decoder detection

In most cases, a connected decoder is registered

automatically during tuning. The decoder should

automatically detect those programs which

> Connect the cable from the external aerial to

the socket marked TV on the television.

> Connect the decoder to the 21-pin AV1 socket

on the television’s socket panel.

require decoding. However, if this is not the case,

then adjust the setting via the MANUAL TUNING

menu for the program in question. Please refer to

the section entitled ‘Adjust tuned TV programs’ in

the chapter ‘Edit tuned programs’ on page 23.

Make sure that all connected

equipment is registered in the

CONNECTIONS menu. For further

information, refer to the chapter

‘Register additional video equipment’

on page 46.

If you wish to connect an RF decoder, connect the

external aerial cable to the decoder input socket

and then forward the signal or cable to the

television’s aerial socket (marked ‘TV IN’).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect a set-top box

Disconnect all involved systems from the

mains before you connect external

equipment.

BeoCenter

Set-top box

> Connect one end of a 21-pin AV cable to the

set-top box.

> Run the cable to the AV1 or AV2 socket on the

back of the television.

> Connect the IR transmitter to the IR OUTPUT

socket on the television.

> If your set-top box delivers HDTV video signal,

and your television is HD-ready, connect the set-

top box to either the DVI-I or Y-Pb-Pr sockets

also.

> Fasten the IR transmitter to the IR receiver of

the set-top box.

Automatic standby …

Set-top boxes must be set up in accordance with

When you register a set-top box in the

CONNECTIONS menu, you can also select an

the documentation enclosed with them.

To be able to use the remote control included with ‘AUTO STANDBY’ time for your set-top box. This

*If you switch the television to standby before the

30 minutes have passed, the set-top box is also

switched to standby.

your set-top box, do not cover its IR receiver

entirely.

means that you can select if the connected set-top

box should switch to standby automatically.

The options are:

AFTER 0 MIN … The set-top box switches to stand-

by immediately when you select another source.

AFTER 30 MIN … The set-top box switches to stand-

by 30 minutes after you have selected another

source*.

AT TV STANDBY … The set-top box switches to

standby when you switch the television to stand-

by.

NEVER … The set-top box does not switch to stand-

by automatically.

FOLLOW TV … The set-top box switches on,

when you switch your television on and it

switches to standby, when you switch your

television to standby.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Connect additional video equipment

Connect a Bang & Olufsen recorder

BeoCenter

Video recorder

Disconnect all involved systems from the mains

before you connect external equipment.

BeoCord V 8000

If you connect a BeoCord V 8000 to your tele-

vision, some of the features of the BeoCord

> Connect one end of a 21-pin AV cable to the AV V 8000 function differently than described in the

socket on the rear of the recorder.

> Then run the cable to the AV 1 socket on the

back of the television.

BeoCord V 8000 Guide, and some are not avail-

able. A supplement for the BeoCord V 8000 Guide

is available from you Bang & Olufsen retailer.

Aerial connection

Use your external aerial connection (or cable TV

network connection) and the aerial cable supplied

with the video recorder.

> Connect the cable from your external aerial to

the signal input socket marked

panel of the recorder.

on the rear

> Direct the aerial signal to the television, using

the aerial cable supplied with the recorder.

> Plug one end into the socket marked ‘TV’ on

the recorder and the other end into the aerial

socket marked ‘TV’ on the television’s socket

panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

If you connect additional video

equipment to your television, you

must register the equipment in the

CONNECTIONS menu.

What is connected?

Registering the equipment connected to the

television enables you to activate it with the

TV SETUP

PROGRAM GROUPS

TUNING

Beo4 remote control.

TIMER RECORDING

PLAY TIMER

When the system is first set up, the

equipment connected at that

particular moment is detected by the

television, and the CONNECTIONS

menu appears automatically on the

screen. If you connect equipment at

a later date, on a permanent basis,

then you must register this

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

OPTIONS

CONNECTIONS

STAND POSITIONS

> Press GO to bring up the OPTIONS menu.

CONNECTIONS is highlighted already.

> Press GO to call up the CONNECTIONS menu.

> Press or to step between the different

sockets: AV1, AV2 and AV3.

SOUND

PICTURE

CLOCK

CONNECTIONS

SOUND

PICTURE

BEOLINK

select

MENU LANGUAGE

AV1

AV2

> Press GO to be able to register a connected

product to the highlighted socket.

select

> Press or to move between the types of

sockets.

equipment in the CONNECTIONS

menu.

CONNECTIONS

> Press or to register what you have

connected to the highlighted socket.

> Press GO to be able to select another AV socket.

> When you have completed your settings, press

STOP to back up through previous menus or

press EXIT to exit all menus directly.

AV1

AV2

AV3

V. MEM

NONE

For information about where and

how to connect extra equipment,

refer to the previous pages and the

chapter ‘Socket panel’ on page 40.

NONE

store

If, for some reason, you disconnect the extra

equipment and then disconnect the television from

the mains, you may have to register the equipment

again upon reconnection, even if you have not

changed your setup of extra equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you have connected additional video

equipment to your television, you must also

‘tell’ the system if you have made additional

connections, such as connecting a digital

sound input, a digital video signal or an IR

transmitter.

AV 2

NONE … if no equipment is connected.

STB SETUP

NOKIA 96025

NOKIA 9820T

NOKIA 9850T

PACE DTR730-IM

SKY DIGITAL

EXPANDER … if you have connected an

Expander box with other auxiliary equipment

connected to it.

SELECTOR

CANALdig DK/S/N

MACAB DCB-101

TPS 96573D

V.AUX … if you have connected any other type

of auxiliary equipment.

CANAL SAT r2

Planet PL 9000

What’s on the CONNECTIONS menu …

AV 1

DVD … if you have connected a DVD player or

similar devices.

CANALdigital

ECHOSTAR 9000

CANALdigital

NONE … if no equipment is connected.

V.MEM … if you have connected a Bang &

Olufsen video recorder or any other video

recorder.

STB … if you have connected a set-top box.

HDTV … if the source connected to this AV socket

delivers HDTV, select which socket is used for

HDTV; Options are: YPbPr, DVI or NO.

TV BOX 1000-S

CANALdigital NL

NOKIA D-BOX

NOKIA D-BOX II

HUMAX F1-VACI

TechniBox CAM1

V.MEM+DECODER … if you have connected a

Bang & Olufsen video recorder with a decoder

connected to it.

store

AV 3

NONE … if no equipment is connected.

PC … if you have connected a PC.

STB … if you have connected a set-top box.

HDTV* … if you have connected audio sound to

one of the audio sockets; Options are A1 or A2.

If you have connected a set-top box, you will be

prompted to select your set-top box from an on-

screen list when you select STB in the CONNECTIONS

menu.

V.MEM+STB … if you have connected a Bang &

Olufsen video recorder with a set-top box

connected to it.

DECODER … if you have connected a decoder.

V.AUX … if you have connected any other type

of auxiliary equipment.

* This option is only available if your television is

equipped with the optional surround sound

STB … if you have connected a set-top box.

HDTV … if the source connected to this AV socket module.

delivers HDTV, select which socket is used for

HDTV; Options are: YPbPr, DVI or NO.

If you connect a Bang & Olufsen video recorder,

the only options for AV 1 are: V.MEM,

V.MEM+STB and V.MEM+DECODER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loudspeaker setup – surround sound

If your television is equipped with the

optional surround sound module,

you can create a surround sound

setup.

Place external speakers

The three illustrations to the right show

examples of how you can place the television

and speakers.

A surround sound setup fits easily

into your living room. Let the picture

determine your ideal listening and

viewing position. You get the best

sound experience in the area created

by the speakers.

The following guidelines apply for all speaker

setups:

– If you have two different sets of speakers,

always use your most powerful speakers as

front speakers.

– Place your speakers where you want them

before you connect them.

– Place your rear speakers on either side behind

your favourite listening position.

This chapter explains how to set up

speakers for surround sound, as well

as how to make the adjustments

necessary to get the best sound.

– You do not necessarily have to place the

speakers in the corners of the room.

– If you want to connect a BeoLab 2 subwoofer,

refer to the subwoofer’s own Guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect speakers

Connect Bang & Olufsen speakers and a

BeoLab 2 subwoofer to the connection panel

at the back of the television. The speakers

must be Bang & Olufsen Power Link speakers.

FRONT

To connect speakers…

> Use the cables enclosed with the speakers.

> Connect the two front speakers to the sockets

marked FRONT.

SUBWOOFER

> Connect the two rear speakers to the sockets

marked REAR.

> Connect the subwoofer to the socket marked

SUBWOOFER.

You can loop the signals from speaker to speaker

(as described in the Guide enclosed with your

speakers), or you can connect each speaker to a

socket. Longer cables and adaptors are available

from your Bang & Olufsen retailer.

REAR

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

SPEAKER TYPE

BEOLAB 1

Remember to set the L–R–LINE switch on both the

front and rear set of speakers to L or R (left and

right channel) to indicate their position in each set.

Set the left speakers to L and the right speakers

to R.

FRONT

> Press GO to bring up the OPTIONS menu and

press to highlight SOUND.

REAR

BEOLAB 6000

YES

SUBWOOFER

> Press GO to bring up the SOUND SETUP menu

and press to highlight SPEAKER TYPE.

> Press GO to bring up the SPEAKER TYPE menu.

> Press or to reveal your speaker type and to

move on to the next speaker set. Choose NONE

if no speakers are connected.

store

> If you have a BeoLab 2 subwoofer, press to

move the cursor to SUBWOOFER and press to

change the ﬁeld to YES.

> Press GO to store or EXIT to leave the menu

without storing.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Loudspeaker setup – surround sound

Set speaker distance

Switch on the television from your favourite

viewing position. Enter the straight-line

distances in metres between your position

and the individual speakers.

CENTRE

LEFT FRONT

RIGHT FRONT

To set the speaker distances …

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

> Press GO to bring up the OPTIONS menu and

press to highlight SOUND.

> Press GO to bring up the SOUND SETUP menu

and press to highlight SPEAKER DISTANCE.

> Press GO to bring up the SPEAKER DISTANCE

menu.

> Press or to move the cursor from speaker

to speaker and press or to select the

approximate straight-line distance in metres

between your viewing position and each of the

speakers.

LEFT REAR

RIGHT REAR

> When you have entered the appropriate speaker

distances, press GO to store or press EXIT to

leave the menu without storing.

SPEAKER DISTANCE

CENTRE

1.0 M

LEFT FRONT

1.0 M

RIGHT FRONT

RIGHT REAR

LEFT REAR

store

You do not have to enter a distance for a BeoLab 2

subwoofer, as the placement of a subwoofer has

little impact on the sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Calibrate the sound level

When you have connected speakers in a

surround sound setup to the television, you

must perform a speaker calibration.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

SPEAKER LEVEL

SEQUENCE

AUTOMATIC

. . . . . . . .

> Press GO to bring up the OPTIONS menu and

press to highlight SOUND.

LEFT FRONT

RIGHT FRONT

RIGHT REAR

LEFT REAR

A calibration sound is produced alternately in

each of the speakers you have connected in

your surround sound setup. Your task is to

adjust the sound level from all the connected

speakers to match the sound level from the

centre speaker. You can choose whether you

want the sound sequence to occur

> Press GO to bring up the SOUND SETUP menu

and press to highlight SPEAKER LEVEL.

> Press GO to bring up the SPEAKER LEVEL menu.

SEQUENCE is highlighted.

store

> Press or to choose between AUTOMATIC

and MANUAL.

It is not necessary to calibrate subwoofer sound in

a surround sound setup. If you still wish to adjust

subwoofer sound when your speaker calibration is

complete, refer to the section ‘Sound adjustments’

on page 52.

> Press or to adjust the speaker sound and

or to move to another speaker.

automatically or manually.

> When you have adjusted the sound for all the

speakers in your surround sound setup, press

GO to store or press EXIT to leave the menu

without storing.

Once you have performed your speaker

calibration, you will only need to re-calibrate

the speaker sound if you make changes to the

setup, for example, if you move one or more

of the speakers.

The sound level from the television speakers

functions as your point of comparison with the

external speakers and can not be adjusted here.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Loudspeaker setup – surround sound

Sound adjustments

Sound settings are preset at the factory to

neutral values which suit most listening

situations. However, if you wish, you can

adjust these settings to your liking.

SOUND ADJUSTMENT

VOLUME

....... . . . . .

BASS

TREBLE

SUBWOOFER

LOUDNESS

You can preset levels for sound volume, bass,

treble and a connected BeoLab 2 subwoofer.

In addition, you can switch the loudness

feature on or off. The loudness feature

compensates for the human ear’s lack of

sensitivity to high and low frequencies. These

frequencies are boosted at low volume levels

so that low music becomes more dynamic.

store

Note that not all items are available if headphones

are connected.

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

> Press GO to bring up the OPTIONS menu and

press to highlight SOUND.

> Press GO to bring up the SOUND SETUP menu,

ADJUSTMENT is highlighted already.

> Press GO to bring up the SOUND ADJUSTMENT

menu.

> Press or to select an item to adjust.

> Press or to adjust the values or choose a

setting.

> Press or to move through menu items.

> Press EXIT to store your settings until you

switch off your television.

> Press GO to store your settings permanently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Choose a speaker combination

While you are watching a movie or

programme, you can choose the speaker

combination you wish to switch on, provided

that the various sound modes are available in

your system.

Speaker combinations

SPEAKER 1 … Sound in the centre speaker only.

SPEAKER 2 … Stereo sound in the two front

speakers. The BeoLab 2 subwoofer is active.

SPEAKER 3 … The centre speaker, front speakers

and the BeoLab 2 subwoofer are active.

SPEAKER 4 … Enhanced stereo sound in the front

and rear speakers. The BeoLab 2 subwoofer is

active.

The television may switch on a speaker

combination automatically. This happens if a

programme or DVD contains information

about the number of speakers to be switched

on. You are still free to choose the speaker

combination you prefer.

SPEAKER 5 … Surround sound from all speakers

including the BeoLab 2 subwoofer. For

programmes encoded in Surround Sound.

To choose a speaker combination via Beo4…

> Press LIST on Beo4 until SPEAKER is shown in

the Beo4 display.

If you have connected only two external front

speakers to the television, you can only choose

SPEAKER 1–3.

> Press the number of the speaker combination

you want. The selected speakers cut in

automatically.

> If you want to adjust the sound balance for the

programme you are watching, press or to

adjust the balance between the external front

and rear speakers, and press or to adjust

the balance between the left and right speakers.

> Press EXIT to remove SPEAKER from the Beo4

display and to return to the source you were

using.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Loudspeaker setup – surround sound

See the name of the active sound system

You can see the name of the active sound

system for a source or programme on the

screen. However, it is not possible to adjust or

preset a sound system.

SOUND SYSTEM

MONO / STEREO

> Press MENU to bring up the TV SETUP menu

and press to highlight OPTIONS.

> Press GO to bring up the OPTIONS menu and

press to highlight SOUND.

> Press GO to bring up the SOUND SETUP menu

and press to highlight SOUND SYSTEM.

> Press GO to bring up the SOUND SYSTEM

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

BeoLink system

All your Bang & Olufsen products can

be connected in a BeoLink system. A

complete BeoLink system enables

you to distribute sound and picture

from one central source throughout

the house.

Advanced operation, 5

All you need to know about using your television beyond daily use, such as how to

operate timed play and timed standby functions, and a connected set-top box.

How to operate a surround sound system.

Tuning and preference settings, 15

Find out how to set up your television for the first time and tune in programs. This

chapter also contains information about settings for time, date, stand positions,

picture and sound.

Placement, sockets and connections, 35

Find out how to handle and place your television and where the sockets are placed.

Find out how to connect a decoder, set-top box or video recorder to your television

and how to register extra equipment. How to connect speakers and how to turn

your television into a surround sound system, including how to choose speaker

combinations.

BeoLink system, 55

•

Connect and operate an audio system, 56

Your television in a link room, 60

Distribute sound and picture with BeoLink, 62

Two televisions in the same room, 64

Customise Beo4, 66

Index, 68

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect and operate an audio system

If you connect a compatible Bang &

Olufsen audio system to the

Connect a radio

If you connect an audio system to your tele-

vision, you must enter the BeoLink menu and

OPTIONS

television using a Master Link cable,

you obtain the benefits of an

integrated audio/video system.

CONNECTIONS

SOUND

set up how the radios should be used:

PICTURE

>Press TV to switch on the television

> Press MENU to bring up the SETUP menu.

> Press to move to OPTIONS, press GO to call

up the OPTIONS menu.

CLOCK

BEOLINK

Play a CD on your audio system using

your television speakers, or switch on

a TV programme and send the sound

to your audio system speakers.

MENU LANGUAGE

LINKED RADIO

INTERNAL RADIO

YES

ENABLE

LINKED RADIO

INTERNAL RADIO

> Press to move to BEOLINK, press GO to call

up the BEOLINK menu.

select

> Press or to move between the menu

options and press or to change settings.

Your AV system can be placed

store

together in one room or in two

rooms with the television placed in

one room and the audio system with

a set of speakers placed in another.

When an audio system is connected to your

television and the built-in radio is enabled, you

can choose which radio to use. In general you

could say that the primary radio is called up by

means of the RADIO button, whereas you must

use the AV button to call up the secondary radio.

If your television is equipped with the

optional FM or FM/DAB module, you

can disable it, and then it cannot be

used as source.

Not all Bang & Olufsen audio systems

support integration with the television.

Download from Www.Somanuals.com. All Manuals Search And Download.

Option setting

If your television has been set up in an AV

system, you may need to set it to the correct

Option with Beo4. Switch the entire system

to standby ﬁrst.

Option 1

Option 2

Option 0

Option setting for the television

> While holding the • button on Beo4, press LIST.

> Let go of both buttons.

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

The television and an audio system set up in one

room – all speakers are connected to the tele-

vision.

You can choose to set up your television (with or

without additional speakers) and the audio system

(with a connected set of speakers) in the same

room.

> Press LIST repeatedly to display V.OPT on Beo4

and then key in the appropriate number

(1, 2 or 4).

Option setting for the audio system

> While holding the • button on Beo4, press LIST.

> Let go of both buttons.

Option 2

Option 5

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

> Press LIST repeatedly to display A.OPT on Beo4

and then key in the appropriate number (0, 1, 2,

5 or 6).

You can choose to set up your audio system in

one room, and the television (with or without

additional speakers) in another.

If you set up your television in a link room where

an audio system is placed, you must set them to

Option 5.

Option 6

If you set up your television in a link room without

an audio system, you must set it to Option 6.

Download from Www.Somanuals.com. All Manuals Search And Download.

>> Connect and operate an audio system

Use an integrated audio/video system

If you integrate your audio system and your

television, you can choose a speaker

combination appropriate to the current video

or audio program, and also record video

sound on the audio system.

Video sound recording

If you listen to sound from your television on your

Bang & Olufsen audio system’s speakers, and your

audio system has a tape recorder, you can record

television sound on the audio tape recorder. Refer

to the Guide enclosed with your audio system for

further information.

LIST

To listen to sound from a television source on your To listen to sound from television on your audio

audio system speakers without switching on the

screen, press LIST repeatedly to display AV* on

Beo4, and then press a source button, such as TV.

system speakers with the screen switched on,

press TV, press LIST repeatedly to display AV*, and

then press TV again.

LIST

To listen to audio sound on the television speakers,

press LIST repeatedly to display AV* on Beo4, and

then press an audio source button, such as CD.

*NOTE! In order to display AV on Beo4, you must

first add it to the Beo4 list of functions. For further

information, refer to the chapter ‘Customise Beo4’

on page 66.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your television in a link room with an audio system

If you set up your television in a link room

and enable the internal radio, you can choose

Option 5

which radio you want to listen to. However,

you can only use the internal radio in your

television, if you have enabled it, as

described on page 56.

LIST

The setups described on this page illustrate which

radio is activated when you have enabled the

internal radio and connected a link radio to your

television also.

RADIO

To listen to radio from the audio system, simply

press RADIO.

To listen to radio from the built in radio, press LIST

repeatedly to display AV* on Beo4, then press

RADIO.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your television in a link room

Option setting

If you have BeoLink installed in your

home and you choose to place your

television in a link room, you can

operate all connected systems

through the television.

For your entire system to function properly, it

is essential that the television in the link

room is set to the correct Option before you

connect it to the system in the main room!

Main room

Link room

To set the link room television to the correct

option …

Option 6*

You must follow the procedure described

below when you connect your television

for use in a link room:

> While holding the • button, press LIST.

> Let go of both buttons.

1 Connect the link room television to the

mains

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

2 Using the Beo4 remote control,

program the link room television to

Option 6*

> Press LIST repeatedly to display V.OPT on Beo4

and press 6*.

*If you connect the television for use in a link room

where other link systems are already connected,

such as speakers, you must set the television to

Option 5 instead.

3 Disconnect the link room television

from the mains

4 Make the link and aerial connections

5 Reconnect the link room television to

the mains.

Download from Www.Somanuals.com. All Manuals Search And Download.

Link room operation

When you are in the link room, you can

operate all connected systems with the Beo4

remote control.

Use a link room source –

source type present in both

rooms …

Main room

Link room

Press the button for the source

you wish to use

Use sources present only in

one of the rooms …

Press the button for the source

you wish to use

RADIO

Operate the source as usual

Listen to stereo sound in your

link room …

Operate the selected source as

usual

Usually sound distributed from a

main room video source, such as

a set-top box, to the link room is

transmitted in mono. However,

you can select stereo sound:

Use a main room source –

source type present in both

rooms …

Press repeatedly on Beo4 until

LINK* is shown in the Beo4

display

LIST

LINK

Press to switch on the television

DTV

LIST

*In order to display LINK and AV on Beo4, you

must first add them to the Beo4 list of functions.

For further information, refer to the chapter

‘Customise Beo4’ on page 66.

Press repeatedly until AV* is

shown in the Beo4 display

Press the button for the source

you wish to use

Press to activate a source

DTV

Operate the source as usual

connected to the main room

system, such as a set-top box

While using this function,

distribution of other main room

sources to other link room

systems is not possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Distribute sound and picture with BeoLink

The BeoLink system makes it possible

to distribute picture and/or sound to

other rooms throughout the house.

To the MASTER LINK socket on the

MASTER

LINK

link room system

For example, you can connect your

television in the living room to

another video system or set of

speakers in another room, thereby

making it possible to ‘move’ the

picture or sound to other rooms.

TV IN

LINK TV

OUT

If you have a BeoLink distribution

system installed, you can either use

your television in the main room,

such as a living room, or in a link

room, such as a study or bedroom.

Video signal distribution to link

rooms

RF Link

Amplifier

The main room system must be connected to

the link room system with a Master Link

cable:

If an audio system is already connected to the

Master Link socket and you wish to connect more

equipment, the Master Link cable must be split in

two and joined with the cable from the link room

using a special junction box. Contact your Bang &

Olufsen retailer for assistance.

Under certain circumstances, it may

be necessary to enter modulator

settings.

> Connect the Master Link cable to the socket

marked MASTER LINK on the television.

> If you want to distribute video signals as well,

connect an ordinary aerial cable to the socket

marked LINK TV OUT on the television. Then

run the aerial cable to the RF Link Ampliﬁer and

the Master Link cable to the link room. Follow

the instructions enclosed with the link room

equipment.

Digital audio and video signals cannot be

distributed from a main room television to the link

room system.

NOTE! Groups made on a television in a main

room cannot be accessed from a link room

television.

Download from Www.Somanuals.com. All Manuals Search And Download.

System modulator

Link frequency

MODULATOR SETUP

MODULATOR ON

LINK FREQUENCY

FREQUENCY

599

FINE TUNE

store

If you have an audio setup, such as a BeoLink

Active/Passive, and you choose to set up a

If, for example, a TV program in your area is

broadcasted on the same frequency as the

non-linkable television in the same room, you BeoLink system uses, 599 MHz, you must tune

must set the system modulator to ON. The

factory setting is OFF, which must be used if

you are using a linkable Bang & Olufsen

television.

the system modulator to an unoccupied

frequency. When you change the link

frequency in the main room system, make

sure that the link frequency in the link room

system corresponds to it.

To switch on the system modulator …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight TUNING.

> Press GO to bring up the TV TUNING menu,

and press to highlight LINK FREQUENCY.

> Press twice, followed by GO. The

MODULATOR SETUP menu appears.

> Press or to reveal ON.

To change the link frequency …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight TUNING.

> Press GO to bring up the TV TUNING menu and

press to highlight LINK FREQUENCY.

> Press GO to bring up the LINK FREQUENCY

menu. FREQUENCY is already highlighted.

> Press or to ﬁnd an unused frequency.

> Press GO to store the setting, or …

> … press EXIT to leave all menus without

storing.

> Press GO to store the setting, or …

> … press EXIT to leave all menus without

storing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Two televisions in the same room

If you have placed your BeoCenter 6

in a room where you already have a

Bang & Olufsen television, and

commands from Beo4 can be

received by both televisions, you

must change the option setting of

BeoCenter 6. This prevents

One remote control for both televisions

For your television to function properly, it is

essential that the television is set to the

correct Option:

BeoCenter 6

Option 4

To set your television for Option 4 …

> While holding the • button on Beo4, press LIST.

> Let go of both buttons.

LIST

LINK

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

simultaneous activation of both

televisions.

> Press LIST repeatedly to display V.OPT on Beo4

and press 4.

Operate your television in Option 4 …

Normally, you can activate a source, such as TV,

simply by pressing the relevant source button on

Beo4. However, when you set your television to

Option 4, you must do the following:

> Press LIST repeatedly until LINK* is shown in

the Beo4 display.

In order to use teletext on a television you have set

to Option 4, you must set up Beo4 to ‘VIDEO 3’,

but this limits the Beo4 functions that can be used

with televisions set to other Options. For further

information refer to the chapter ‘Customise Beo4’

on page 66.

> Press a source button, such as TV.

*In order to display LINK on Beo4, you must add it to

the Beo4 list of functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customise Beo4

The Beo4 buttons give direct remote

control of a large number of

television functions, and the Beo4

display gives you access to even more

functions.

Set up Beo4

Add an extra ‘button’

The Beo4 is set up for use with BeoCenter 6

from the factory. However, if you buy a new

Beo4 you can set this up for your television

also.

When you add a new function to the Beo4

list, you can then bring up this new ‘button’

in the Beo4 display.

Press and hold the standby

button down

•

Press and hold the standby

button down

•

Whenever a source is displayed on

Beo4 (TV, RADIO, etc.), you can press

the LIST button and bring up extra

functions in the display to help you

operate that source, just as if you

were calling up extra buttons. You

can also switch on extra equipment

connected to your television.

Press to get access to the Beo4

setup function

LIST

Press to get access to the Beo4

setup function

LIST

Let go of both buttons. ADD?

appears in the display

ADD?

Let go of both buttons. ADD?

appears in the display

ADD?

Press to bring up the list of

available ‘buttons’ to add from.

The ﬁrst ‘button’ appears in the

display, it ﬂashes on and off

Press repeatedly to display

CONFIG? on Beo4

LIST

CONFIG?

You can customise a new Beo4 to suit

your television, and change the order

in which these extra functions appear

when you call them up.

Press to be able to select the

type of conﬁguration

Press to move forwards or

backwards in the list of all extra

‘buttons’

Press repeatedly to display

VIDEO? on Beo4

LIST

VIDEO?

Note that Beo4 contains a list of all of

Bang & Olufsen’s extra audio and

video functions, but only those

functions supported by the television

work when you call them up in the

Beo4 display.

Press to add and place the

‘button’ on its preset position or

as the ﬁrst ‘button’ in the list,

or …

Press to get access to the video

conﬁguration

Press repeatedly to display

VIDEO 2 on Beo4*

LIST

VIDEO 2

STORED

… press to insert the ‘button’ at

a speciﬁc position in the list

1 – 9

Press to store the conﬁguration

ADDED appears, indicating that

the ‘button’ has been added.

You leave the Beo4 setup

function automatically

ADDED

STORED appears, indicating that

the conﬁguration has been

stored. You leave the Beo4

setup function automatically

*If you have set your television to

Option 4, select ‘VIDEO 3’.

Download from Www.Somanuals.com. All Manuals Search And Download.

Move extra ‘buttons’

Remove an extra ‘button’

You can rearrange the order in which the

extra ‘buttons’ appear when you press LIST.

You can remove any of the extra ‘buttons’

that are available when you press LIST.

Press and hold the standby

button down

•

Press and hold the standby

button down

•

Press to get access to the Beo4

setup function

LIST

Press to get access to the Beo4

setup function

LIST

Let go of both buttons. ADD?

appears in the display

ADD?

Let go of both buttons. ADD?

appears in the display

ADD?

Press repeatedly to display

MOVE? on Beo4

LIST

MOVE?

Press repeatedly to display

REMOVE? on Beo4

LIST

REMOVE?

Press to bring up the list of extra GO

‘buttons’. The ﬁrst ‘button’

appears in the display

Press to bring up the list of extra GO

‘buttons’. The ﬁrst ‘button’

appears in the display

Press to move forwards or

backwards in the list of extra

’buttons’

Press to move forwards or

backwards in the list of extra

’buttons’

Add an extra ‘button’ to Beo4, either to the top of

the list or to a specific position.

Press to move and place the

displayed ‘button’ as the ﬁrst in

the list, or …

Press to remove the ‘button’

shown in the display

REMOVED appears, indicating

that the ‘button’ has been

removed. You leave the Beo4

setup function automatically

REMOVED

… press to move the ‘button’ to

a speciﬁc position in the list

1 – 9

MOVED appears, indicating that

the ‘button’ has been moved.

You leave the Beo4 setup

function automatically

MOVED

Move extra ‘buttons’, either to the top of the list

or to a specific position.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Beo4 remote control

Connections

Add a ‘button’ to the Beo4 list, 66

Changing the Beo4 batteries, Guide p. 18

Cleaning the Beo4, Guide p. 18

Conﬁgure Beo4, 66

Aerial and mains connection, 38

Audio system – connect to the television, 56

Camera, 39

Connections – your television in a link

room, 60

Customise Beo4, 66

Introducing your television and Beo4, Guide

p. 4

Decoder, 42

Headphones, 39

Move extra ‘buttons’, 67

Link room connections, 60

Loudspeakers, 49

Remove a ‘button’ from the Beo4 list, 67

Replace Beo4 batteries, Guide p. 18

Using Beo4, Guide p. 4

Set-top box, 43

Socket panel, 40

Sockets for temporary connections, 39

Video recorder, 44

BeoLink

Link frequency, 63

Link room operation, 61

Master Link socket, 40

Your television in a link room, 60

Contact

Contact Bang & Olufsen, Guide p. 19

Camera

Decoder

Connect a Camera, 39

Connect a decoder, 42

Copy from a Camcorder to a videotape, 39

Displays and menus

Clock

Displayed information and menus, Guide p. 5

On-screen menus, 4

Set the time and date, 29

Computer monitor

DAB radio

Adjust picture, 12

Add new TV or radio programs, 27

Adjust DAB aerial, 25

Bring up the computer image on the

screen, 12

Adjust tuned DAB programs, 24

Auto-tuning – ﬁrst-time setup of your tele-

vision, 16

Connect a computer, 41

Bring up a list of radio programs, Guide p. 14

Change radio display, 33

DAB DRC menu, 25

Delete tuned programs, 21

Edit tuned programs, 20

Move tuned programs, 20

Name tuned programs, 22

Re-tune via automatic tuning, 26

See list of all programs, Guide p. 14

Tune in new programs, manual tuning, 24

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup

Picture

Set-top box

First-time setup procedure, 16

Adjust brightness, colour or contrast, 30

Change the picture format, Guide p. 9

Remove the picture from the screen, 30

Connect a set-top box, 43

Set-Top Box Controller menu, 10

Universal Beo4 operation, 11

Format

Use the set-top box in a link room, 11

Use the set-top box’s own menu, 11

Change the picture format, Guide p. 9

Pincode

Activate the pincode system, Guide p. 16

Change or delete your pincode, Guide p. 16

If you have forgotten your pincode, Guide

p. 17

Groups

Socket panel

Create Groups, Guide p. 12

Camera and headphones sockets, 39

Socket panel, 40

Move programs within a Group, Guide p. 13

Select programs in a Group, Guide p. 12

Use your pincode, Guide p. 17

Sound

Headphones

Placement

Adjust or mute the sound, Guide p. 8

Adjust volume, bass or treble, 31

Change sound type or language, Guide p. 8

Change speaker balance or combination,

Guide p. 9,

Connect headphones, 39

Set up your television, 36

Set positions for the television to turn to, 28

Turn the television, Guide p. 7

Language

Change sound type or language, Guide p. 8

Choose menu language, 32

Position of television

Stand

First-time setup – choose menu language, 16

Set positions for the television to turn to, 28

Turn the television, Guide p. 7

Determine the centre position – ﬁrst-time

setup, 18

Loudspeakers

Set positions for the television to turn to, 28

Turn the television, Guide p. 7

Radio

Change speaker balance or combination,

Guide p. 9

Add new TV or radio programs, 27

Adjust tuned radio programs, 24

Auto-tuning – ﬁrst-time setup of your

television, 16

Connect speakers, 49

Subtitles

Place external speakers, 48

Set speaker distance, 50

Sound adjustments, 31

Subtitles from teletext, Guide p. 11

Bring up a list of radio programs, Guide p. 14

Create Groups of radio programs, Guide p. 12

Delete tuned programs, 21

Surround sound

Maintenance

Edit tuned programs, 20

About the screen, Guide p. 18

Listen to tuned programs, Guide p. 14

Move tuned programs, 20

Adjust speaker balance, 13

Calibrate the sound level, 51

Choose speaker combination, 13, Guide p. 9

Connect speakers, 49

Change Beo4 batteries, Guide p. 18

Handling your television, 36

Name tuned programs, 22

Maintenance of your television, Guide p. 18

Re-tune via automatic tuning, 26

See list of all radio programs, Guide p. 14

Place external speakers, 48

See the name of the active sound system, 54

Set speaker distance, 50

Master Link

Audio system with your television, 56

Connect your audio system, 56

Option setting, 57

Sound adjustments, 52

Use integrated audio/video system, 58

Download from Www.Somanuals.com. All Manuals Search And Download.

> Index

Teletext

TV programs

Basic teletext functions, Guide p. 10

Add new TV programs, 27

Adjust tuned programs, 23

Auto-tuning – ﬁrst-time setup of your

television, 16

Day-to-day use of MEMO pages, Guide p. 11

Store favourite teletext pages, Guide p. 11

Bring up a TV list, Guide p. 6

Delete tuned programs, 21

Timer

Set the television to switch itself on and off, 8 Edit tuned programs, 20

Set the time and date, 29

Move tuned programs, 21

Timed play and timed standby, 8

View, edit or delete a Timer, 9

Name tuned programs, 22

Re-tune via automatic tuning, 26

Select a TV program, Guide p. 6

Tune

Wake-up Timer

Add new radio or TV programs, 27

Adjust tuned programs, 23

Auto-tuning – ﬁrst-time setup of your

television, 17

Enter a Wake-up Timer, 6

Check or delete a Wake-up Timer, 7

Set the time and date, 29

Delete tuned programs, 21

Move tuned programs, 21

Name tuned programs, 22

Re-tune via automatic tuning, 26

Download from Www.Somanuals.com. All Manuals Search And Download.

Waste Electrical and Electronic Equipment

(WEEE) – Environmental protection

When disposing of electrical and electronic equip-

ment by use of the collection systems available in

your country, you protect the environment, human

health and contribute to the prudent and rational

use of natural resources. Collecting electrical and

electronic equipment and waste prevents the

potential contamination of nature with the

The European Parliament and the Council of the

European Union have issued the Waste Electrical

and Electronic Equipment Directive. The purpose of

the Directive is the prevention of waste of electrical

and electronic equipment, and to promote the reuse

and recycling and other forms of recovery of such

waste. As such the Directive concerns producers,

distributors and consumers.

hazardous substances which may be present in

electrical and electronic products and equipment.

Your Bang & Olufsen retailer will assist with and

The WEEE directive requires that both manufacturers advise you of the correct way of disposal in your

and end-consumers dispose of electrical and

electronic equipment and parts in an environmentally

safe manner, and that equipment and waste are

reused or recovered for their materials or energy.

Electrical and electronic equipment and parts must

not be disposed of with ordinary household refuse;

all electrical and electronic equipment and parts

must be collected and disposed of separately.

country.

Small products may not always be marked with

the pictogram in which case this is present in the

instructions for use, on the guarantee certificate

and printed on the packaging.

Products and equipment which must be collected

for reuse, recycling and other forms of recovery are

marked with the pictogram shown.

This product fulfils the conditions stated

in the EEU directives 89/336 and 73/23.

Technical speciﬁcations, features and the use

thereof are subject to change without notice.

3507899

0605

Printed in Denmark by Bogtrykkergården a-s, Struer

Download from Www.Somanuals.com. All Manuals Search And Download.

www.bang-olufsen.com

Download from Www.Somanuals.com. All Manuals Search And Download.

3Com Switch 5104M FIB User Manual
3M Cordless Saw E 9BM User Manual
Acer Laptop 2440 Series User Manual
Allied Telesis Network Router AR400 User Manual
Amana Clothes Dryer NGD4500V User Manual
American Standard Indoor Furnishings M968412A User Manual
Apple MP3 Player Nike + iPod User Manual
Beko Freezer 63720 H User Manual
BK Stereo Amplifier AV2500 Series II User Manual
Eureka Tents Tent Grand Manan Tour User Manual