ASSEMBLY INSTRUCTIONS
Save these instructions for future use.
C
D, E
MODEL #: 08100
NAME: Birdnest Tote Bed
A
PARTS INCLUDED:
(A) 1 - Tote Bed
(B) 4 - Plastic Support Ribs
(C) 1 - Hood
(D) 1 - Fabric Sheet
(E) 1 - Mattress
B
BEFORE YOU
BEGIN
PICTURE 1
ASSEMBLY:
Ensure that all the
parts and hardware
listed are included.
If anything is missing, please do
not return the product to the store.
E-mail [email protected]
for assistance.
STEP 1: See PICTURE 1. Remove the SHEET and
MATTRESS (D, E) from the TOTE BED (A). Remove
the inner fabric liner from inside the TOTE BED (A) by separating the hook
and loop tape around the top, inner edge. Insert the FOUR RIB SUPPORTS
(B) into the vertical pockets on the inside of the TOTE BED (A). There is
one at the head, one at the foot, and one on either side. Replace the fabric
inner liner by refastening the hook and loop tape. Replace the sheet and
mattress inside the bed.
PICTURE 2
STEP 2: See PICTURE 2. Join the zipper pull on the HOOD (C) to the
zipper on the top edge TOTE BED and zip around the full edge of the hood/
bed. The hood can be removed and reattached at any time. The BIRDNEST
TOTE BED is now assembled! Be sure to review the safety instructions on
PAGE 2!
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)
Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
Page 1 of 2
1.1/0608
Download from Www.Somanuals.com. All Manuals Search And Download.
|